Scribd
Upload
85 views5 pages

10 SusAxle

The document summarizes the suspension and axle specifications of the new Hilux. It describes that the Hilux uses a double-wishbone independent suspension in the front and a leaf spring rigid axle suspension in the rear. It provides details on the front and rear suspension components and how they enable excellent ride comfort, handling, and off-road ability. The document also notes that the front axle uses maintenance-free ball joints and unit-type double-row tapered bearings, while the rear axle is a semi-floating design for lightweight and simplicity. Models with ABS integrate the speed sensor rotor into the axle bearings.

Uploaded by

Carlos Machado
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
85 views5 pages

10 SusAxle

The document summarizes the suspension and axle specifications of the new Hilux. It describes that the Hilux uses a double-wishbone independent suspension in the front and a leaf spring rigid axle suspension in the rear. It provides details on the front and rear suspension components and how they enable excellent ride comfort, handling, and off-road ability. The document also notes that the front axle uses maintenance-free ball joints and unit-type double-row tapered bearings, while the rear axle is a semi-floating design for lightweight and simplicity. Models with ABS integrate the speed sensor rotor into the axle bearings.

Uploaded by

Carlos Machado
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
You are on page 1/ 5

CH-72 CHASSIS – SUSPENSION AND AXLE

SUSPENSION AND AXLE

 SUSPENSION

1. General

The double-wishbone type independent suspension for front and the leaf spring type rigid axle suspension
for rear are used on the new Hilux.

271CH44

4WD Model

Specifications

Drive Type 2WD 4WD, 2WD PreRunner


1,540 (60.6)*1
Front mm (in.) 1,510 (59.4)
1,510 (59.4)*2
Tread
1,540 (60.6)*1
Rear mm (in.) 1,510 (59.4)
1,510 (59.4)*2
Front Wheel Caster degree 4°45’ 3°09’
Alignment
Camber degree - 0°12’ 0°14’
Toe-In mm (in.) 0 (0) 0 (0)
CH-73 CHASSIS – SUSPENSION AND AXLE
King Pin Inclination degree 11°07’ 12°18’

*1 : Except 16 x 6JJ disc wheel models


*2 : With 16 x 6JJ disc wheel models
CHASSIS – SUSPENSION AND AXLE CH-74

2. Front and Rear Suspension

Through the optimal allocation of components, and the front and rear suspensions realizes excellent riding
comfort, controllability, and off-road drivability.

Front Suspension

Adjustment 271CH45
Cams

Service Tip
The camber and caster of the front suspension are adjusted at the adjustment cams of the lower arms,
and the toe-in is adjusted by changing the lengths of the tie-rod ends.
For details, refer to Hilux Repair Manual.

Rear Suspension

271CH46
CH-75 CHASSIS – SUSPENSION AND AXLE
CHASSIS – SUSPENSION AND AXLE CH-76

 AXLE

 Upper and lower ball joints and hub bearing of the front axle are used maintenance-free ball joints and
unit-type double-row tapered bearing.
 Rear axle is used a semi-floating axle to realize lightweight and simple in construction.
 On the models with ABS, the speed sensor rotor is integrated in the bearing inner race of both the front
and rear axles.

Front Axle

Sensor Rotor
(with ABS model)

Speed Sensor
(with ABS model)

Lower Ball Joint


271CH47

4WD Model

Rear Axle

Sensor Rotor
(with ABS model) Speed Sensor
(with ABS model) 271CH48

You might also like