0% found this document useful (0 votes)
387 views3 pages

Drt450 Cumminsqsm11 Eng

This document provides technical specifications for the Kalmar DRT450 reachstacker, including its lifting capacity of 45,000kg at a load center of L4, service weight of 69,500kg, Cummins QSM11 diesel engine with 224kW of power, Dana 15.5HR36000 transmission with 4 forward and 4 reverse gears, and pneumatic wheels with dimensions of 18.00x25 inches in the front and 18.00x25, PR40 E4 in the rear. The reachstacker has a maximum beam angle of 60 degrees, attachment rotation of 195-105 degrees clockwise to counterclockwise, and sideshift of ±800mm.

Uploaded by

ANH LÊ
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
387 views3 pages

Drt450 Cumminsqsm11 Eng

This document provides technical specifications for the Kalmar DRT450 reachstacker, including its lifting capacity of 45,000kg at a load center of L4, service weight of 69,500kg, Cummins QSM11 diesel engine with 224kW of power, Dana 15.5HR36000 transmission with 4 forward and 4 reverse gears, and pneumatic wheels with dimensions of 18.00x25 inches in the front and 18.00x25, PR40 E4 in the rear. The reachstacker has a maximum beam angle of 60 degrees, attachment rotation of 195-105 degrees clockwise to counterclockwise, and sideshift of ±800mm.

Uploaded by

ANH LÊ
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

TECHNICAL DATA REACHSTACKERS 42 – 45 TONNES

Kalmar DRT450

Lifting data DRT450


Lifting capacity at load centre L4, rated – at max. lifting height (kg) 45000 – 42000
Lifting capacity at load centre L5, rated – at max. lifting height (kg) 31000 – 31000
Lifting speed, unloaded – at 70% of rated load (m/s) 0,42 – 0,25
Lowering speed, unloaded – at rated load (m/s) 0,36 – 0,36

Driving data
Travelling speed forward, unloaded – at rated load (km/h) 25 – 21
Travelling speed backward, unloaded – at rated load (km/h) 25 – 21
Gradeability at 2 km/h, unloaded – at rated load (%) 38 – 22
Max. gradeability, unloaded – at rated load (%) 40 – 28
Drawbar pull, max (kN) 317
Stability according to EN 1459

Weight of truck
Service weight (kg) 69500
Axle load front at load centre L4, unloaded – at rated load (kg) 34700 – 99900
Axle load front at load centre L5, unloaded – at rated load (kg) 38900 – 93000
Axle load front at driving position according to EN 1459 and rated load (kg) 88500
Axle load rear at load centre L4, unloaded – at rated load (kg) 34800 – 14600
Axle load rear at load centre L5, unloaded – at rated load (kg) 30600 – 7500
Axle load rear at driving position according to EN 1459 and rated load (kg) 26000

Engine
Manufacturer – type designation Cummins QSM11
Fuel – type of engine Diesel – 4 stroke
Number of cylinders – compression (cm³) 6 – 16.3:1
Power according to ISO 3046 – at revs (kW/rpm) 224 – 2000
Torque according to ISO 3046 – at revs (Nm/rpm) 1575 – 1400
Alternator, type – power (W) AC – 2400
Starting battery, voltage – capacity (V – Ah) 2×12 – 140
Fuel consumption, normal driving (l/h) 18

Transmission
Manufacturer – type designation Dana – 15.5HR36000
Clutch, type Torque converter
Gearbox, type Powershift
Number of gears, forward – reverse 4–4
Driving axle, type Differential and hub reduction

Wheels
Type Pneumatic
Dimension, front – rear (inch) 18.00×25 – 18.00×25, PR40 E4
Number of wheels, front – rear (*driven) 4* – 2
Pressure (MPa) 1,0

Miscellaneous
Steering system, type – maneuvering Servo assisted – Steering wheel
Service brake system, type – affected wheels Wet disc brakes – Drive wheel
Parking brake system, type – affected wheels Spring brake – Drive wheel
Max. hydraulic pressure (MPa) 21,0
LWAZ  acc. to EN 12053 A-weighted sound power level in an operational cycle (db(A)) 112
LpAZ acc. to EN 12053 A-weighted emission sound pressure level at the operator’s position for the operational cycle (db(A)) 73
Fuel volume (I) 550
Hydraulic oil volume (I) 600
Overload protection Electronic
Dimensions DRT450
Beam angle, max (°) α 60
Attachment rotation, CW – CCW (°) ß 195 – 105
Min. aisle width for 90° stacking with 20’ containers (mm) A1 11400
Min. aisle width for 90° stacking with 40’ containers (mm) A2 13600
Sideshift ± (mm) V1 ±800
Track (c-c), front – rear (mm) S 3030 – 2600
Ground clearence, min. (mm) 250

The design and materials specification are subject to alternation without prior notice.
Tolerances according to K-standard 95430.0008/0009

Cargotec improves the efficiency of cargo flows on land and at sea – wherever cargo is on the move.
Cargotec’s daughter brands Hiab, Kalmar and MacGregor are recognised leaders in cargo and load handling
solutions around the world. Cargotec’s global network is positioned close to customers and offers extensive
2011.12.05

services that ensure the continuous, reliable and sustainable performance of equipment. Cargotec Sweden AB
Cargotec’s class B shares are quoted on the NASDAQ OMX Helsinki. www.cargotec.com www.cargotec.com
DRT450

LOAD CURVE FOR DRT450-62S5


50000

45000

40000

35000

30000
Capacity [kg]

25000

20000

15000

10000

5000

0
0 1000 2000 3000 4000 5000 6000 7000 8000 9000
Load Centre [mm]

File: LC10103.xls Sheet: Load Curve


Release date: 10-09-27

Cargotec improves the efficiency of cargo flows on land and at sea – wherever cargo is on the move.
Cargotec’s daughter brands Hiab, Kalmar and MacGregor are recognised leaders in cargo and load handling
solutions around the world. Cargotec’s global network is positioned close to customers and offers extensive
services that ensure the continuous, reliable and sustainable performance of equipment. Cargotec Sweden AB
Cargotec’s class B shares are quoted on the NASDAQ OMX Helsinki. www.cargotec.com www.cargotec.com

You might also like