Scribd
Upload
684 views1 page

Global Aluminium Private Limited: M/S. Wonjin Autoparts India PVT LTD, Chennai

This document is a test certificate from Global Aluminium Private Limited for an order from M/S. WONJIN AUTOPARTS INDIA PVT LTD. It certifies that 478.30 kilograms of 6061 aluminum bars and rods met specifications for alloy composition, mechanical properties, and quality assurance standards. Key data reported includes the alloy and temper, chemical composition, tensile strength, proof stress, elongation, and hardness of the aluminum shipment. The certificate confirms the aluminum extruded sections met all given specifications.

Uploaded by

Sonu Singh
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
684 views1 page

Global Aluminium Private Limited: M/S. Wonjin Autoparts India PVT LTD, Chennai

This document is a test certificate from Global Aluminium Private Limited for an order from M/S. WONJIN AUTOPARTS INDIA PVT LTD. It certifies that 478.30 kilograms of 6061 aluminum bars and rods met specifications for alloy composition, mechanical properties, and quality assurance standards. Key data reported includes the alloy and temper, chemical composition, tensile strength, proof stress, elongation, and hardness of the aluminum shipment. The certificate confirms the aluminum extruded sections met all given specifications.

Uploaded by

Sonu Singh
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

GLOBAL ALUMINIUM PRIVATE LIMITED

QUALITY ASSURANCE DEPARTMENT


QF/GAPL/QA/07(Rev.01)
TEST CERTIFICATE

CUSTOMER NAME : M/S. WONJIN AUTOPARTS INDIA PVT LTD, CHENNAI.

INV.NO / DATE : 1081 / 23.06.2018 REF.NO : GAPL/1152/2018-19

P.O.NO / DATE : WAN/0355/18-19 dt : 2018-06-11 DATE : 23.06.2018

SL.NO SECTION NO. CUT LENGTH(MM) NET WEIGHT(KGS) ALLOY & TEMPER DESCRIPTION

1 98109 1000 478.30 6061 / T6 AL.BARS & RODS


RGAE1T5SPRWON
121-24MM*39.94MM

478.30 TOTAL QTY:


STANDARD AS PER EN : 573-3:1994,755-2:1997.
REQUIRED / ACTUAL CHEMICAL COMPOSITION ( IN %) :

HEAT NO. Si Fe Mg Mn Cu Zn Ti Cr Al

7823 Min Max Min Max Min Max Min Max Min Max Min Max Min Max Min Max

REQUIRED 0.40 0.80 --- 0.70 0.80 1.20 --- 0.15 0.15 0.40 --- 0.25 --- 0.15 0.04 0.35 REM.

ACTUAL 0.710 0.170 1.050 0.054 0.270 0.001 0.018 0.092 REM.

REQUIRED / ACTUAL MECHANICAL PROPERTIES :


TENSILE STRENGTH 0.2% PROOF STRESS %ELONGATION ELECTRICAL HARDNESS
(MPa) (MPa) IN 50 MM G.L CONDUCTIVITY ( BHN )
Min Max Min Max Min Min Min

REQUIRED 260 ----- 240 ----- 7 ----- -----

1.ACTUAL 298.25 277.14 9.38 ----- 96.10


ACTUAL 303.58 281.69 9.16 ----- 97.80

This is to certify that the aluminium extruded section have been duly inspected and found to confirm
to the given specification.

IN CHARGE, QUALITY ASSURANCE


Works : Kallakal , Toopran , Medak Dist - 502336, Phone : 08454-250537,250631
Corporate Office: 5-2-196/1,Distillery Road, Secunderabad - 500003,Mail ID:quality1@globalaluminium.com

You might also like