MILL TEST CERTIFICATE Jindal Stainless Limited.
(INSPECTION CERTIFICATE) IS 6911
Jajpur,Odisha
In Accordance with EN 10204 :2004 Type 3.1
CM/L-5200020363
a6c914jlmMDE4MDA2NjU=
CUSTOMER :Bhavya Stainless Pvt Ltd. CERTIFICATE NO. :JSL-JRD/QA/2024-25/DOM/01800665
CITY :Mumbai DATE :05.04.2024
P.O.NO. :BHAVYA/3FEB/PPP10MARCH PO DATE:05.02.2024 VEHICLE NO. :OD15Z7855
CUSTOMER SPECIFICATION :As per OA/PO agreement SALES ORDER NO. :0558095052
SHIPMENT/DELIVERY NO. :6300140435 NET WT(MT) :10.580
Material Description/Product Grade / Type Material Specifications Process-Route
STAINLESS STEEL 304L/304/1.4307/1.4301 EN 10088-2:14, EN 10028-7:16, ASTM A240/A240M-23A, ASME EF-AOD-LRF-CCS
SA-240/SA-240M 2023 SEC. II, PART A, IS 6911:2017 AMD. 3
PHYSICAL DESCRIPTION
SR BATCH NO. PARENT COIL NO. PKT/PALLET WEIGHT NO. OF HEAT NO. THK WIDTH LENGTH FINISH EDGE QUALITY
NO. / PLATE NO. NO. (MT) PCS (mm) (mm) (mm)
1 100151517B 100151517 235254 2.210 1 12400563 36.000 1,250.00 6,000.00 N1 Mill Edge PRIME
2 100152699A 100152699 236600 2.092 1 31108B29 28.000 1,500.00 6,000.00 N1 Mill Edge PRIME
3 100152700A 100152700 236600 2.093 1 31108B29 28.000 1,500.00 6,000.00 N1 Mill Edge PRIME
4 100152700B 100152700 236849 2.090 1 31108B29 28.000 1,500.00 6,000.00 N1 Mill Edge PRIME
5 100152701A 100152701 236601 2.095 1 31108B29 28.000 1,500.00 6,000.00 N1 Mill Edge PRIME
CHEMICAL ANALYSIS (LADLE)
HEAT NO. %C %Mn %S %P %Si %Ni %Cr %N %Mo %Cu %Ti %Nb %Al
12400563 0.023 1.37 0.003 0.038 0.25 8.05 18.15 0.062 - - - - -
31108B29 0.020 1.25 0.001 0.028 0.35 8.02 18.12 0.069 - - - - -
MECHANICAL PROPERTIES:SAMPLE DIRECTION - TRANSVERSE
Sr Rp 0.2/ Rp 1.0 Rm/ %EL %EL %EL Hardness Bend Test
No. YS Mpa TS GL= 50 GL= 80 GL= 5.65 SO HRBW
Mpa Mpa mm mm mm
1 335 377 644 57 - 52 81 / 82 -
2 326 370 628 56 - 51 82 / 83 -
3 326 370 628 56 - 51 82 / 83 -
4 326 370 628 56 - 51 82 / 83 -
5 326 370 628 56 - 51 82 / 83 -
ADDITIONAL INFORMATION
1)- MATERIAL HAS BEEN SOLUTION ANNEALED AT MIN 1040º C & QUENCHED IN WATER.
2)- ABOVE MATERIAL ALSO CONFIRM TO IS 6911:2017 AMD. 3 GRADE 304L/304.
3)- MATERIALS CONFIRM TO THE REQUIREMENTS AS PER ASTM A480/A480M-23B & ASME SA-480/SA-480M SEC. II PART A-2023.
* THE ABOVE MATERIAL FULLY CONFORMS TO IS 6911:2017 AMD 3 CHEMICAL & MECHANICAL PROPERTIES OF
PRODUCT AS TESTED IN ACCORDANCE WITH THE SCHEME OF TESTING & INSPECTION CONTAINED
IN BIS CERTIFICATION.
HOT ROLLED FINISHES : (BL, ANN, N1, 1D, CHQ) & COLD ROLLED FINISHES: (2E, 2D, 2B, BA, NO.4, HL)
PLATE:- MATERIAL 5.00 MM AND OVER IN THICKNESS AND OVER 250 MM IN WIDTH (AS PER ASTM/ASME STANDARD) & THICKNESS 3 MM OR OVER (AS PER DIN STANDARD)
SHEET:- MATERIAL UNDER 5.00 MM IN THICKNESS AND 600 MM AND OVER IN WIDTH (AS PER ASTM/ASME STANDARD) & THICKNESS LESS THAN 3 MM (AS PER DIN STANDARD)
COIL:- IN "PHYSICAL DESCRIPTION"- LENGTH MENTIONED AS "COIL".
Jindal Stainless Limited, This is hereby certified that the material was manufactured, sampled, tested & inspected in accordance ISO 9001 : 2015
Kalinga Nagar Industrial Complex, with requirements of the material specification and has been found to meet the requirements of order. ISO 14001 : 2015
PO: Danagadi , Jajpur The material supplied under this Test Certificate is free from any radioactive contamination as checked ISO 45001 : 2018
Odisha - 755026, India. by procedures established by Jindal Stainless Limited as per the recommendations provided by AERB. ISO 50001: 2018
TEL :+91-9078899031, IATF 16949 : 2016
FAX :+91-06726-266006 CERTIFIED COMPANY
Email: QualityMTC@jindalstainless.com Format Ref: JSLO/F/QA-CRM/32 Rev.01
Eff Date: 24/09/2021
Any unauthorised usage of this Test Certificate will warrant Legal Action.
1/1
