AL6115 High Power Single 15"

Low Frequency Loudspeaker

Key Features:

1 x 15" 2226H VGC™ Driver.

Large vent area for high output with
low distortion.

Arrays with various AE Series mid-high
frequency and compact 2-way models
(see AE Series Array Guide).

Applications:

Performing arts facilities

Theatrical sound design

Auditoriums

Houses of worship

Live clubs Specifications:

Dance-clubs/discotheques System:
Frequency Range (-10 dB): 40 Hz – 2.5 kHz

Sports facilities Frequency Response (±3 dB): 47 Hz – 2.1 kHz
Transducer Power Rating (AES)1: 1000 W (4000 W peak), 2 hrs

Themed entertainment venues Long-Term System Power Rating2: 600 W (2400 W peak), 100 hrs
AL6115 is a high power, low Maximum SPL3: 50 Hz –125 Hz: 129 dB-SPL cont avg (135 dB peak)
125 Hz – 800 Hz: 127 dB-SPL cont avg (133 dB peak)
frequency loudspeaker system com-
System Sensitivity (dB-SPL, 1W @ 1m)4: 50 Hz – 125 Hz: 99 dB
prised of one 380 mm (15 in) VGC 125 Hz – 800 Hz: 97 dB
Vented Gap Cooled low frequency Nominal Impedance: 8 ohms
driver in a front-loaded, vented config- Transducers:
uration. The trapezoidal cabinet is fitted Low Frequency Driver: 1 x JBL 2226H 380 mm (15 in) VGC™ driver with 100 mm (4 in)
voice coil
with M10 threaded suspension points.
Physical:
Pre-engineered array bracketry is avail- Enclosure: Trapezoidal with 15 degree side angles, 16 mm (5/8 in) exterior
able. grade 11-ply Finnish birch plywood
Suspension Attachment: 13 points (3 top, 3 bottom, 2 each side, 3 rear), M10 threaded
AL6115 is part of JBL’s AE hardware
Application Engineered Series, a Finish: Black DuraFlex™ finish. White available upon request.
versatile family of loudspeakers for a Grille: Powder coated 14 gauge perforated steel, with acoustically trans-
wide variety of applications. parent black foam backing.
Input Connector: NL4 Neutrik Speakon® and CE-compliant covered barrier strip
terminals. Barrier terminals accept up to 5.2 sq mm (10 AWG)
wire or max width 9 mm (.375 in) spade lugs. Speakon in paral-
lel with barrier strip for loop-through.
Environmental Specifications: Mil-Std 810; IP-x3 per IEC529.
Dimensions (H x W x D in 548 x 561 x 657 mm
vertical cabinet orientation): (21.6 x 22 1 x 25.9 in)
Net Weight: 29.0 kg (64 lb)
Optional Accessories: M10 x 35 mm forged shoulder eyebolts with washers.
Optional planar array frame kit. See AE Series Bracket Guide
1
AES standard, one decade pink noise with 6 dB crest factor within device's operational band, free air. Standard AES 2 hr rating
plus long-term 100 hr rating are specified for low-frequency transducers.
2
AES standard, one decade pink noise with 6 dB crest factor, in cabinet, long-term 100 hr rating.
3
Calculated based on power rating and sensitivity, exclusive of power compression.
4
Half-space (2
) loading, averaged in specified frequency band.
JBL continually engages in research related to product improvement. Changes introduced into existing products without notice
are an expression of that philosophy.

AL6115 High Power 15" Low Frequency Loudspeaker
Frequency response is measured on-axis at a distance referenced to 1 m @ 1 watt (2.83 Vrms)
input, shown as half-space (2π, solid line) and full-space (4π, dotted line) environment.

Electrical Input Impedance

Dimensions in mm (in)

For more detailed dimensional information, refer

JBL Professional
8500 Balboa Boulevard, P.O. Box 2200
Northridge, California 91329 U.S.A. SS AL6115
CRP 10M
A Harman International Company 7/02
© Copyright 2002 JBL Professional