BELT CONVEYORS

HORIZONTAL GRAIN TRANSPORT

Belt conveyors are used to horizontally transport of grains of cereals and maize, legume plants,
oleaginous plants, various feed products (meal, middlings, granules and briquettes) and other.
Transport of raw material can be continuous at manual or mechanical loading. They are widely used
at grain treatment (acceptance, cleaning, drying, storage, etc.), in production plants and mixing
plants of feed, large establishments in the food industry.
Additional equipment of the conveyor:
The belt conveyor is characterised with:
1. Bearings (feet) under the belt conveyor
• Capacity from 30 to 150 t/h.
2. Movable truck with distributor
• Length from 3m to 100m with stroke every 0.5 m.
• Made of galvanised steel sheet from 2 to 4mm. 3. Additional equipment for the
• The whole is screwed with screws of hardness of movable truck.
8.8. 4. Rotations (movement) detector
• There are two variants: covered and uncovered. 5. Sensor of belt alignment
• The possibility to equip the conveyor with a
movable truck with two-way electric distributor
(possibility to fill the flat warehouses).
• The are equipped with two-sandwich transporting
belt, normal or oil resistant.
• Grain can be transported at an angle with
limitation to 30 degrees.
• The belt is connected to each other via the process
of curing, so it is not possible to detach on the
connection.
• Application of proven drives assures reliable
operation of the conveyors.
• We offer different variants of length of the legs
under the belt conveyor.
• Depending on capacity of the conveyor, outlet and
inlet are designed under the appropriate fittings,
such as:
Ø159; Ø219; Ø244.5; Ø324.
• The conveyor without a truck can be used in the right-left
option, which means that goods can be discharged at the
end and at the beginning of the device.

BELT SET STATION N

FILLING TRANSPORTING DRIVE DRIVE ENGINE
STATION
LOADING
HOOPER

TENSIONING
STATION

GRAIN
OUTLET

CONVEYOR BELT
ELEMENT CONVEYOR RIGHT-LEFT) DRIVEN
ROLLERS
SCREW CANOPY SUPPORT UNDER BELT
(IN OPERATION MODE TENSIONING CONVEYOR
 1057 1207

L—L = 1m; 1,5m; 3m; channel x

n
L—L + from 1070 to

T650 — 80t/h
T*00 —
T650 —
30t/h T400
1301/h T650
— 50t/h
— 1501/1
F

Filling Electric Belt Capaci

c B C d E F K L-L
Type dimensi power speed ty
mm mm mm mm mm mm pc. m onsmm kW m/s t/h
30t/h 400 540 fi60x167 fi60x434 267 322 1 3.0-70.0 g159 1.5-4.0 1.7 30
50t/h 400 540 fi60x167 fi60x434 267 322 1 3.0-70.0 g219 1.5-4.0 1.7 50
80t/h 650 790 fi60x151 fi60x684 260 320 1 3.0-100.0 244.5 2.2-5.5 1.7 80
130t/h 650 790 fi60x151 fi60x684 260 320 1 3.0-100.0 324 2.2-7.5 1.7 130
150t/h 650 790 fi60x151 fi60x684 260 320 1 3.0-100.0 g324 2.2-7.5 1.7 150
The producer reserves the right to introduce technical changes.

SINGLE-OUTLET OPTION

DOUBLE-OUTLET OPTION (RIGHT-LEFT)

OPTION OF UNCOVERED CONVEYOR WITH A MOVABLE TRUCK WITH DESIGNATED PLACES OF GRAIN
DISCHARGE

‘’’ ‘’’

The covered belt conveyor is characterised with:

• The possibility of applying outside. It is resistant to different climatic conditions.
• It takes up little space.
• The possibility of discharging goods max. from two discharges (at the beginning and at the end
of the device).
• The possibility of applying at an angle (to 30 degrees).

The uncovered belt conveyor is characterised with:

• It must be placed under a canopy.
• The conveyor with a movable truck needs free space:
- T400 — 2.0 x 2.0m
- T650 — 2.5 x 2.5m
• The possibility to install a movable truck, which allows to:
- discharge the bulk material anywhere, however it is not possible to stop at the designated
point (option with electric distributor electric - discharging on two sides of the hall).
- discharge the bulk material in the designated location, however it is not possible to discharge
at any other point than the designated (option with discharge to the hooper).
• Conducting of the power cable of the truck can be as following:
- conducting on guiding strip (rail), on which the guiding trucks are installed,
- conducting on tensioned line, on which clamp hoops with meshes are installed.
• The possibility to set only horizontally.
 OPTION OF UNCOVERED CONVEYOR WITH A MOVABLE TRUCK WITH ANY PLACES OF GRAIN DISCHARGE
- VERSION WITH THE GUIDING TRUCK ON THE GUIDING STRIP

OPTION OF UNCOVERED CONVEYOR WITH A MOVABLE TRUCK WITH ANY PLACES OF

GRAIN DISCHARGE
- VERSION WITH CLAMP HOOPS ON TENSIONED LINE

BELT SUPPOER SUPPORTING POWER CLAMP

TRANSPORTING UNDER STRUCTURE CABLES HOOPS
CABLE UNDER
CONVEYOR TRUCK AND WITH
DISTRIBUTO MESHES
R

SENSOR
OF BELT
ALIGNMEN
T INLET
TENSIONED LINE OUTLET
UNDER
TRUCK CABLE
GUIDING GRAIN
OUTLE
DISTRIBUTO T
R TRUCK DIRECTION
ELECTRIC BELT GUIDING
WITH CONVEYOR SENSOR
OUTLET
ROTATIONS
 FREE SPACE FREE SPACE NEEDED TO
NEEDED TO MOVE THE TRUCK MOVE THE TRUCK OF THE
OF THE BELT CONVEYOR BELT CONVEYOR WITH
WITH POWER CABLE POWER CABLE
TRUCK BELT
2000 BELT CONVEYOR CONVEYOR
TRUCK

54 0
937 1190

DISCHARGE
SUPPORTING BEAM FOR BELT CONVEYOR
SUPPORTING BEAMS FROM THE
FOR THE BELT TRUCK OF THE THE BELT CONVEYOR (EXAMPLE)
CONVEYOR (EXAMPLE) BELT
CONVEYOR
Belt conveyor T650
Belt conveyor T400
MOVABLE DISPERSER WITH BELT CONVEYORS

The device is used to evenly fill the flat warehouse with the bulk material. It distributes the grain in a
designated place. The whole system is based on the conveyor belts, which are supported on special
bearing structures, and move on rails on the movable trucks.

Movable disperser with belt conveyors are characterised with:

• It must be placed under a canopy.
• It consists of 2 uncovered belt conveyors and 1 conveyor with movable truck.
• Discharge of the bulk material is anywhere.
• Light device with the structure.
• The possibility to set only horizontally.