Curriculum vitae
Mohammed Nur Ehsan B Mohammed Omar
Postal Address : L-2-6, Apartment Idaman Puri, Jalan Setia 1,
Seri Gombak, 68100, Batu Caves, Selangor
Malaysia
Place and Date of Birth : 4 May 1987, Kuala Terengganu
Age and Gender : 28, Male
Status : Married
Nationality : Malaysian
Spoken : Malay and English
Phone : +60132897736
Email (prefer) : m.nur.ehsan@gmail.com
IC No : 870504-46-5135
Driving License : B2, D
Summary of Experience
Having experience in inspection field such as Certifying Authority, Vendor/shop inspector, Piping
and Structural Welding Inspector, NDE Inspector, Material Inspector, Turnaround inspector, NDT
Technician Operator for petrochemical projects, power plant, oil and gas projects, Ship Repair
and general industries
Education
Bachelor Degree in Design, Faculty of Mechanical Engineering.
2007-2010
Universiti Teknologi Malaysia
Matriculation Qualification, Physics Courses
2005-2007
Pahang Matriculation College
Sijil Pelajaran Malaysia, Mechanical Engineering courses
2003-2004
Sekolah Menengah Teknik Terengganu
Courses Attend
Welding Inspector CSWIP 3.1 Cert No: 91020
Ultrasonic Testing PCN Level 2 (3.1, 3.2, 3.9) PCN No: 311311
Radiographic interpretation PCN Level 2 PCN No: 311311
Automated Ultrasonic Data Interpreter CSWIP Level 2 Cert No: 82384
Magnetic Particle Testing CSWIP Level 2 Cert No: 70785
Liquid Penetrant Testing CSWIP Level 2 Cert No: 80160
Training Attend
GE WeldStar Automated Ultrasonic Testing and Operation inHouse Training
Time of Flight interpretation and Operation (ToFD) inHouse Training
Manual Encoded Phased Array System and Interpretation (PAUT)
Certificate Scheme Welding Inspector Personnel (Cswip 3.1)
BOSEIT and HUET (OPITO Certificate)
Oil and Gas Safety Passport (OGSP)
CIDB Green Card
Working Experience
(2015) Bureau Veritas (M) Sdn Bhd
Position: Welding/NDE/Industrial Inspector
Date : January 2015 – Current 2015
Owner : Asian Supply Base
Project : Container Repair and Certification
Location: ASB, Labuan
Owner : Schlumberger Malaysia
Project : Well Services, Completion and Certification
Location: ASB, Labuan
DNV Germanischer Lloyd GLM Sdn Bhd
Position: Welding/NDE/Source Inspector
Date : September 2014 – Jan 2015
Owner : Brunei Shell Petroleum
Project : Steel Structure Assembly
Location: Petroline metal sdn bhd, Tebrau, Johor
(2014) Owner : Abu Dhabi Marine Operating Company (ADMA-OPCO)
Project : Fabrication of HUB Flange and Seal ring
Location: Freudenberg Oil & Gas Technologies, Kajang, Selangor
Owner : Aker Solution
Project : Tullow Ten Subsea Fabrication
Location: Aker Solution, Pulau Indah, Klang, Selangor
Owner : Lundin Malaysia B.V
Project : ValveTest and Hydrotest for THHE
Location: KSB, Kemaman, Terengganu
Scope: 1. monitoring welding and NDT activities, Installation, cleaning,
Testing, and pre-commissioning
2. Review, check and confirm traceability of material certificates and
documentations to ensure compliance with specification given.
3. Review of Procedures and ITPs and ensure been followed by
contractor.
4. Liaise with the contractor/ company’s material group regarding non-
compliance, disposal, identification, and preservation.
5. Verify contractor material control activities such as receiving,
storing, preservation, issuing and comply with the procedure and
requirements. Ensure all records are kept and verified to ensure
retrieve ability of information regarding material.
6. Inspect and confirm that ship loose items shall be physically
inspected to be consistent with ship loose packing list.
7. Review of Welders Qualification Records. NDT procedures and
technicians’ resumes. NDT equipment and calibration certs.
Certificates for pipes, valve, welding equipment, consumables and
etc.
8. Monitor the wrapping and coating activities of weld joints.
9. Review and endorse of inspection reports.
(2014) Setsco Services Pte Ltd
Position: Engineering/Welding Inspector
Date : June 2014 – Sept 2014
Client : PUB Singapore
Project : 700mm and 900mm Dia potable water pipeline within Singapore
Location:Pasir Gudang, Johor
Scope: 1. Monitor and verification to Package Engineer on quality
performance level at Fabrication yards.
2. Monitor and verification to Package Engineer on project inspection
and test.
3. Perform surveillance verification on inspection reports prepared by
inspectors.
4. Review and monitor NCR status, Welder Performance, Weld Repair
Rate, Welding Parameters Record at fabrication yards in close
coordination with Package Engineer.
5. Provide QC surveillance during fabrication, installation and
inspection / testing activities.
6. Conducting Inspection and testing as per approved procedures and
ITP.
7. Monitoring of preservation, storage and material handling.
8. Issue inspection progress report and attendance progress meeting
(2014) SGS (M) Sdn Bhd
Position: Defect Inspector
Date : March 2014 – May 2014
Owner : PETRONAS Chemical Ethylene Sdn Bhd
Project : Major Turnaround 2014 PCESB
Location:Kerteh, Terengganu
Scope: 1. Monitor and verification to Package Engineer on quality
performance level at Fabrication yards.
2. Monitor and verification to Package Engineer on project inspection
and test.
3. Perform surveillance verification on inspection reports prepared by
inspectors.
4. Review and monitor NCR status, Welder Performance, Weld Repair
Rate, Welding Parameters Record at fabrication yards in close
coordination with Package Engineer.
5. Provide QC surveillance during fabrication, installation and
inspection / testing activities.
6. Conducting Inspection and testing as per approved procedures and
ITP.
7. Monitoring of preservation, storage and material handling.
8. Issue inspection progress report and attendance progress meeting
(2013) SEM Inspection Sdn Bhd
Position: Piping/Defect Inspector
Date : Oct 2013 – March 2014
Owner : PETRONAS Chemical Ethylene Sdn Bhd
Project : Preparation for Major Turnaround 2014 PCESB
Location:Kerteh, Terengganu
Scope: 1. To monitor and verified the job pack given on site
2. To monitor the progress for shutdown preparation in the job pack
given.
3. To ensure the item that in the job pack as per condition reported
and verified the location of the item.
4. Review and monitor NCR status, Welder Performance, Weld Repair
Rate, Welding Parameters Record at fabrication yards in close
coordination with Package Engineer.
4. Provide QC surveillance during fabrication, installation and
inspection / testing activities.
5. Conducting Inspection and testing as per approved procedures and
ITP.
6. Monitoring of preservation, storage and material handling.
7. Issue inspection progress report and attendance progress meeting
(2013) Oilfield Technical Inspection Sdn Bhd
Position: AUT Operator
Date : May 2013 – Oct 2013
Owner : Various Demonstrations for Client
Project : Various Demonstrations
Location: OTI office, AUT department, Shah Alam, Selangor.
Position: AUT trainee Operator
Date : March 2013 – May 2013
Owner : HESS Exploration and Production Malaysia B.V.
Project : North Malay Basin Integrated Gas Development.
Location: On board DLB 264, LAWIT Field, Malaysia
Position: NDT inspector / AUT trainee operator
Date : Sept 2012 – Feb 2013
Owner : Serimax Welding Services (M) Sdn Bhd
Project : Various
Location: Serimax Welding Workshop, Pasir Gudang, Johor
Position: AUT trainee operator
Date : March 2012 – Sept 2012
Owner : Kebabangan Petroleum Operating Company (KPOC)
Project : Kebabangan Northen Hub Development Pipeline (24” and 14”)
Location: On board DLB 264, Sabah Water, Malaysia
Position: AUT trainee operator / Scanner Tech
Date : Jan 2012 – March 2012
Owner : Kebabangan Petroleum Operating Company (KPOC)
Project : WQT for Kebabangan Northen Hub Development Pipeline (24” and 14”)
Location: On board DLB 264, Sabah Water, Malaysia
Position: AUT trainee operator / Scanner Tech
Date : March 2011 – Jan 2012
Owner : Various courses attend involving AUT GE WELDSTAR machine.
Project : Various Demonstrations and Classes
Location: OTI office, AUT department, Shah Alam, Selangor.
Scope: 1. to interpret the weld and clarify according to the specification.
2. To follow the procedure given and ensure the machine setup is
according to the specification given.
3. To ensure the machine fully functional and in good condition as well
as ready to go.
4. The keep track on maintained of the machine and ensure the
calibration is good and acceptable.
5. The maintained a good calibration and good scanning time as well as
result to ensure the quality of the weld scanning.
6. To prepare the report and updating the issue to supervisor.
7. To liaise with the AUT operator in every way from calibration and
scanning the weld to ensure the best result can be achieve.
(2011) Dynanential Engineering Sdn Bhd
Position: NDT inspector
Owner : PETROFAC
Project : Ocean Legend Major Shutdown
Location: MMHE, Pasir Gudang, Johor.
Position: NDT inspector
Owner : MISC
Project : FSU Lekas, Puteri Firus
Location: MMHE, Pasir Gudang, Johor.
Position: NDT inspector
Owner : Technip AsiaFlex
Project : Rebuilding Umbilical Reel and Installation
Location: AsiaFlex Fabrication Yard, Tanjung Langsat, Johor.
Position: NDT inspector
Owner : Doosan
Project : LNG Puteri Zamrud Shutdown
Location: MMHE, Pasir Gudang, Johor.
Position: NDT inspector
Owner : Air Product (M) Sdn Bhd
Project : Fabrication of Vessel and Installation
Location: MMHE, Pasir Gudang, Johor.
(2010) Danamin Inspection Sdn Bhd
Position: NDT Multi Technician
Owner : Technip Subsea
Client : Bend Weld Sdn Bhd
Project : Fabrication of Subsea equipment
Location: Pontian, Johor.
Position: NDT Multi Technician
Owner : Tanjung Bin Power Plant
Project : Minor and Major Shutdown for ST10 and ST30 boiler
Location: Pontian, Johor.
Position: NDT Multi Technician
Owner : Malaysia Marine Heavy Engineering (MMHE)
Project : Various
Location: MMHE, Pasir Gudang, Johor.
(2010) Salutary Avenue Engineering Sdn Bhd
Position: QC inspector
Owner : Various
Project : Various Fabrication of Air intake system
Location: Pasir Gudang, Johor.
Skills, Interest and Additional Information
Knowledge in weld inspection and testing such as NDT (Non-Destructive Test).
Familiar with VT, RI, RT, AUT, UT, PT, and MT method
Familiar with GE WeldStar AUT machine, to set up for project from calibration block until the
welds scan. To maintenance the machine, software, and troubleshooting the machine.
Familiar with Code Standard API 1104 mostly, PTS, AWS D1.1, ASME B31.3, API RP2X, DNV
F101, and Client Specification.
Familiar with Water Pipeline code, SS142, BS2633 and several Client Spec.
Familiar with Microsoft Word, Microsoft PowerPoint, Microsoft Excel and, Rhino, AutoCAD.
Preferences
• Type of employment: Any
• Passport: Yes
• Current Location: Kuala Lumpur, Malaysia
• Availability: Anytime
• Salary: Negotiable
References
Mr. Ahmad Rastom
Source Coordination Inspector
DNV -GL
Mobile Phone: +6 019-7838033
Mr. Faizal Azemi
Senior Aut Operator
Oilfield Technical Inspection Sdn Bhd
Mobile Phone: +6 013-2342229
Mr. Amir Talib
NDT Coordinator
Dyananential Engineering Sdn Bhd
Mobile Phone: +6 013-7189127
Mobile Phone: +6 019-7458700
Mr. Ikhwan Daud
Senior Inspector Coordinator
Sem Inspection Sdn Bhd
Mobile phone: 017-7178082
Hirrahman Mohammed
Senior Engineering Inspector
Setsco Services pte ltd
Mobile Phone: 0179792372
Email: hirrahman@gmail.com
