"
"41)"-5

GENERAL LAB
283
Thermometers

H-3547

H-2639 H-3550

H-3542A

H-2634D H-3540

H-2612

Dial Thermometers, Pocket-Type Thermometers, Dual-Scale General Testing

Ship Ship
Model Description Range Divisions Model Description Range Divisions
Wt. Wt.
1" dial, 5” long stem, includes 25 to 0.45 lb. Direct-reading, all-metal dial 25 to 125°F 1°F
H-2633 1°F H-2631D
plastic pocket case and clip. 125°F .20 kg thermometers for gener- 0 to 50°C .5°C
0.25 lb. al use include °F and °C
1" dial, 5” long stem, includes 50 to
H-2639 5°F scales. Units have bi-metal 0 to 220°F 2°F
plastic pocket case and clip. 550°F .11 kg H-2632D element that actuates -10 to 100°C 1°C
1" dial, 5” long stem, includes 0.7 lb.
-40 to 0.2 lb. pointer over graduated dial.
H-3550 plastic pocket case w/ calibra- 2°F .23 kg
180°F .09 kg Stainless steel stem is 8"
tion tool. long x 0.15" (203 x 4mm).
50 to 500°F 5°F
1" dial, 5” long stem, includes H-2634D Dial face is 1-3/4" (45mm)
0 to 0.7 lb. 0 to 260°C 2°C
H-3552 plastic pocket case w/ calibra- 2°F dia. external adjustment
220°F .32 kg allows recalibration.
tion tool.
1" dial, 5” long stem, includes 0 to 0.7 lb. Thermometers, General Purpose Mercury Fahrenheit
H-3553 2°C
plastic pocket case and clip. 150°C .32 kg
1" dial, 5” long stem, includes 0 to 0.7 lb. Model Range Div. Length Ship Wt.
H-3554 5°C
plastic pocket case and clip. 250°C .32 kg
H-2611 -30 to 120°F 1°F 12" (305mm)
H-2613 0 to 230°F 2°F 12" (305mm)
1.5 lb.
H-2615 0 to 300°F 2°F 12" (305mm)
Stick Thermometers, Pocket-Type .09 kg
H-2617 20 to 500°F 2°F 16" (405mm)
Ship
Model Description Range Divisions H-2619 20 to 750°F 5°F 16" (405mm)
Wt.
5" long stem. Non-toxic Thermometers, General Purpose Mercury, Celsius
liquid thermometer, Features 0 to 0.2 lb.
H-3547 copper-plated bulb to resist 1°F Model Range Div. Length Ship Wt.
cutting, includes metal pock- 120°F .09kg
et case and clip
H-2612 -35 to 50°C 1°C 305mm (12")
5" long stem. Non-toxic liq- -10 to 0.7 lb.
H-3542A uid thermometer, includes 1°C H-2614 -20 to 110°C 1°C 305mm (12")
metal pocket case and clip. 110°C .32 kg 1.1 lb.
H-2616 -20 to 150°C 1°C 305mm (12")
5" long stem. Large-bore, .36 kg
tempered glass with non-tox- 0 to 0.05 lb. H-2618 -10 to 260°C 1°C 405mm (16")
H-3540 2°F
ic liquid, includes plastic 220°F .02 kg H-2620 -10 to 400°C 2°C 405mm (16")
pocket case and clip.

CAUTION

*
Some of these thermometers contain mercury. There are
restrictions on their sale and shipment. Please check laws in your area or contact
us before ordering. Due to Illinois law, Humboldt must drop-ship these items
from New Jersey. Mercury Thermometers require ground shipment in the U.S.
International and air shipments ship as Dangerous Goods.

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

 ASPHALT
250
Penetrometers

H-1240D

H-1240
H-1200

H-1250 H-1252

Penetrometer, Universal to automatically start a test with a button push and Water Bath
ASTM D5, D217, D1168, D1321, D1403, D1831, have the test end after a preset duration. ASTM D6927, D5581 and D4867
D5329; AASHTO T49, T187 and others Penetrometer, Digital, 120V 60Hz H-1240D Microprocessor-based control for precise tempera-
Direct-reading instrument for precision penetration Penetrometer, Digital, 220V 50/60Hz H-1240D.4F tures throughout the range. Includes a stainless
Shipping wt. 26.2 lbs (11.8kg)
measurements of bituminous materials, cement, steel shelf, which stands 2" (51mm) above the bot-
petrolatum and waxes, as well as food, cosmetics Penetrometer for Battery Paste tom of the unit for free circulation of water above
and pharmaceutical products. Unit has 5" diam- Battery Paste Penetrometer combines the H-1200 and below test samples. Volume is 7.76 gallons
eter indicator dial, graduated in 400 divisions of and a H-1255 grease cone, which has a hardened (29.40L) and dimensions are: ID: 19.5" W x 11.5" D
0.1mm, corresponding to 40mm penetration. Zero steel tip with a special plunger. Total needle weight x 8" H (495.3 x 292.1 x 203.2mm).
preset to eliminate errors. Includes 47.5g plunger is 60g ±.050g. Deluxe Water Bath, 120V 60Hz H-1392
with 3.2mm hole, and two loading weights (50g Penetrometer for Battery Paste H-1202 Deluxe Water Bath, 220V 50/60Hz H-1392.4F
Shipping wt. 25 lbs (11kg)
and 100g). Overall dim. 10.5" x 13" x 22" (266.7 x Ship wt. 43lbs. (19.5kg)
330.2 x 558.8mm). Penetrometer, Portable Economy Water Bath
Penetrometer, Universal H-1200 ASTM D5, D217, D1168, D1191, D1321, D1403, Low-cost alternative water bath for heating spec-
Shipping wt. 25 lbs (11kg) D1831, D1855; AASHTO T49, T187 and others imens holds eight standard 4" stability molds.
Penetrometer, Electric Lighter and smaller than H-1200 for field work, Supporting shelf above the bottom allows water
ASTM D5, D217, D1168, D1191, D1321, D1403, unit’s micrometer adjusts for accurate settings, as circulation around specimens. Automatic thermo-
D1831, D1855; AASHTO T49, T187 and others well as coarse adjustment for approximate set- static control with a range of 150° to 500°F (65°
Takes our H-1200 universal penetrometer and tings. Only one additional 50g loading weight is to 160°C). ID 11.5" x 19.5" x 5.5" (293 x 497 x
adds an automatic digital timer to it. The timer's included with a H-1280 needle. Overall dim. 7" x 140mm) deep. H-1380.4F uses a step-down trans-
release mechanism is switchable between seconds 7" x 16" (178 x 178 x 406mm). former, which is included, for electric conversion.
minutes, or hours. Timer may be set in 1/10th sec- Penetrometer, Portable H-1250 Deluxe Water Bath, 120V 60Hz H-1380
Shipping wt. 14 lbs (6.3kg)
ond intervals. Plunger releases with push of a but- Deluxe Water Bath, 220V 50/60Hz H-1380.4F
ton, and automatically stops after the preset time Penetrometer for Battery Paste, Portable Ship wt. 18lbs. (18.16kg)
duration. H-1240.4F adds a voltage adapter and Battery Paste Penetrometer combines the H-1250 Transfer Dish
internal switch on the timing mechanism to change and a H-1255 grease cone, which has a hardened ASTM D5
cycle to 50Hz steel tip with a special plunger. Total needle weight
Plastic transfer dish has flat bottom, straight sides
Penetrometer, Electric, 120V 60Hz H-1240 is 60g ±.050g.
and metal centering lugs with magnet in the bot-
Penetrometer, Electric, 220V 50/60Hz H-1240.4F Penetrometer for Battery Paste, Portable H-1252
Shipping wt. 9 lbs (4.08kg)
tom. Size is: 3.75" dia. x 3.25" deep (95 x 83mm).
Shipping wt. 32 lbs (15kg)
Transfer Dish H-1352
Penetrometer, Digital Deluxe Water Bath Shipping wt. 0.9 lb (0.4kg)
ASTM D5, D217, D1168, D1191, D1321, D1403, ASTM D6927, D5581 and D4867
D1831, D1855; AASHTO T49, T187 and others Microprocessor-based control for precise tem-
The H-1240D penetrometer adds a digital gauge peratures throughout the range to 180°F. Includes
to the H-1240 electric penetrometer to provide magnetic circulator, ensuring constant water tem-
precise at-a-glance readings, as well as the ability perature, and, a stainless steel shelf, which stands
2" (51mm) above the bottom of the unit for free
circulation of water above and below test samples
aided by magnetic stir bar, included. Volume is
7.76 gallons (29.40L) and dimensions are: ID: 19.5"
W x 11.5" D x 8" H (495.3 x 292.1 x 203.2mm)
Deluxe Water Bath, 120V 60Hz H-1390
Deluxe Water Bath, 220V 50/60Hz H-1390.4F H-1392
Ship wt. 44lbs. (19.9kg)
H-1352
www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300
 ASPHALT
251
Penetrometers
H-1280 H-1255

H-1300
H-2519
H-1302 H-1270

H-1310
H-1320
H-1317
Penetration Needles and Cones H-2520 H-2522 H-2524 H-2529

Standard hardened stainless steel needle, Measuring

40-45mm exposed needle length. Wt. H-1280 firmness of solid
20° aluminum cone, 3.2mm ferrule,0.8mm
2.5g. and plasticized
stainless steel blunt tip. Overall length H-1270
Bituminous fats: shorten-
Standard hardened stainless steel needle, 106mm. Wt. 45g.
materials ings, butters
40-45mm exposed needle length. Certified
ASTM D5; AAS- H-1300 AOCS Cc 16-60
to ASTM accuracy by independent labora-
HTO T49, IP49; tory. Wt. 2.5g. Recovery of
ASA Std. A37.1; 1/4 scale. (Not considered a substitute for
used grease,
Fed Spec. SS.R. Long hardened stainless steel needle, 50- full-size cone specified in ASTM D217.) Wt. H-2519
H-1290 small samples
406C, Meth. 55mm exposed needle length. Wt. 2.5g. 9.38g
ASTM D1403
214.01 Long hardened stainless steel needle, 50-
Hollow 90° brass cone, highly polished
55mm exposed needle length. Certified to Grease testing
H-1302 stainless steel tip. Removable nut and H-2520
ASTM accuracy by independent laboratory. penetrometers stem. Wt. 102.5g.
Wt. 2.5g. ASTM D217,
D937 ASA Std. Hollow 90° stainless steel cone, highly
Hardened stainless steel wax penetration
Z11.3 polished stainless tip. Removable nut and H-2522
Waxes with 250 needles with tapered point, blunt tip of
H-1310 stem. Wt. 102.5g.
or less pene- truncated cone. Ferrule is approx. 3.2mm
tration ASTM dia. Wt. 2.5g. Hollow 90° Magnesium cone and plunger.
ASTM D2884 H-2524
D1321 Total cone wt. 30.0g
Same as H-1310. Certified to ASTM accu-
H-1317
racy Food, Paste,
Hollow 90° Aluminum cone and tip. Total
Paints U.S. Dept H-2529
Hardened stainless steel tip with special wt. 35g
Battery paste H-1255 of Agriculture
plunger. Total wt. 60g ± .050g.
Applications
Joint sealant for
requiring 90·
asphalt & con- Resilience ball penetration tool. Total wt. Stainless steel replacement tip, nut and
H-1320 cones, ASTM H-2525
crete pavements 27.5g. stem.
D217, D937
ASTM D5329
ASA std. Z11.3
Moisture Boxes, Aluminum
Aluminum Moisture Boxes
OD ID Height Inside Ht. Volume Model
cu. in./fl. oz. Flat-bottom, straight-side seamless aluminum box
has tight fitting cover, which fits bottom of box as
2.650 (44cc)
2" (51mm) 1.975 (50mm) .875" (22mm) 0.865" (22mm) H-4926 well. Protects sample from exposure during stor-
1.47 (44ml)
age and weighing operations.
8.366 (137cc) Aluminum Moisture Boxes See chart at left
2.5" (64mm) 2.470 (63mm) 1.75" (44mm) 1.746" (44mm) H-4927
4.64 (137ml)
6.963 (114cc) Tin Sample Cups
3" (76mm) 3.000 (76mm) 1" (25mm) 0.985" (25mm) H-4928
3.86 (114ml) Flat-bottom, seamless tin sample cups have tele-
19.037 (312cc) scoping covers. Hold samples for determining
3.5" (89mm) 3.490 (89mm) 2" (51mm) 1.990" (51mm) H-4929
10.55 (312ml) penetrations.
Tin Sample Cups See chart at left
Sample Cups, Tin
Capacity Dimensions Quantity Model
2.5 oz (71g) 1.87" (47.5mm) ID, 1.42" (36mm) deep 48 H-1350.3A
3 oz (85g) 2.25" (57.1mm) ID, 1.42" (36mm) deep 36 H-1350.3
4.7 oz (133g) 2.42" (61.5mm) ID, 1.67" (42.6mm) deep 36 H-1350.4A
5.6 oz (159g) 2.59" (66mm) ID, 1.72" (43.4mm) deep 36 H-1350.6A
8.2 oz (232g) 3.05" (77.5mm) ID, 1.97" (50mm) deep 18 H-1350.8A
16 oz (454g) 4" (102mm) ID, 2.375" (60.3mm) deep 1 H-1350.16
H-4929 H-1350.70
42.3 oz (1200g) 6.12" (155mm) ID, 3" (76.2mm) deep 1 H-1350.42
70.5 oz (2000g) 6.12" (155mm) ID, 5" (127mm) deep 1 H-1350.70

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

 ASPHALT
250
Penetrometers

H-1240D

H-1240
H-1200

H-1250 H-1252

Penetrometer, Universal to automatically start a test with a button push and Water Bath
ASTM D5, D217, D1168, D1321, D1403, D1831, have the test end after a preset duration. ASTM D6927, D5581 and D4867
D5329; AASHTO T49, T187 and others Penetrometer, Digital, 120V 60Hz H-1240D Microprocessor-based control for precise tempera-
Direct-reading instrument for precision penetration Penetrometer, Digital, 220V 50/60Hz H-1240D.4F tures throughout the range. Includes a stainless
Shipping wt. 26.2 lbs (11.8kg)
measurements of bituminous materials, cement, steel shelf, which stands 2" (51mm) above the bot-
petrolatum and waxes, as well as food, cosmetics Penetrometer for Battery Paste tom of the unit for free circulation of water above
and pharmaceutical products. Unit has 5" diam- Battery Paste Penetrometer combines the H-1200 and below test samples. Volume is 7.76 gallons
eter indicator dial, graduated in 400 divisions of and a H-1255 grease cone, which has a hardened (29.40L) and dimensions are: ID: 19.5" W x 11.5" D
0.1mm, corresponding to 40mm penetration. Zero steel tip with a special plunger. Total needle weight x 8" H (495.3 x 292.1 x 203.2mm).
preset to eliminate errors. Includes 47.5g plunger is 60g ±.050g. Deluxe Water Bath, 120V 60Hz H-1392
with 3.2mm hole, and two loading weights (50g Penetrometer for Battery Paste H-1202 Deluxe Water Bath, 220V 50/60Hz H-1392.4F
Shipping wt. 25 lbs (11kg)
and 100g). Overall dim. 10.5" x 13" x 22" (266.7 x Ship wt. 43lbs. (19.5kg)
330.2 x 558.8mm). Penetrometer, Portable Economy Water Bath
Penetrometer, Universal H-1200 ASTM D5, D217, D1168, D1191, D1321, D1403, Low-cost alternative water bath for heating spec-
Shipping wt. 25 lbs (11kg) D1831, D1855; AASHTO T49, T187 and others imens holds eight standard 4" stability molds.
Penetrometer, Electric Lighter and smaller than H-1200 for field work, Supporting shelf above the bottom allows water
ASTM D5, D217, D1168, D1191, D1321, D1403, unit’s micrometer adjusts for accurate settings, as circulation around specimens. Automatic thermo-
D1831, D1855; AASHTO T49, T187 and others well as coarse adjustment for approximate set- static control with a range of 150° to 500°F (65°
Takes our H-1200 universal penetrometer and tings. Only one additional 50g loading weight is to 160°C). ID 11.5" x 19.5" x 5.5" (293 x 497 x
adds an automatic digital timer to it. The timer's included with a H-1280 needle. Overall dim. 7" x 140mm) deep. H-1380.4F uses a step-down trans-
release mechanism is switchable between seconds 7" x 16" (178 x 178 x 406mm). former, which is included, for electric conversion.
minutes, or hours. Timer may be set in 1/10th sec- Penetrometer, Portable H-1250 Deluxe Water Bath, 120V 60Hz H-1380
Shipping wt. 14 lbs (6.3kg)
ond intervals. Plunger releases with push of a but- Deluxe Water Bath, 220V 50/60Hz H-1380.4F
ton, and automatically stops after the preset time Penetrometer for Battery Paste, Portable Ship wt. 18lbs. (18.16kg)
duration. H-1240.4F adds a voltage adapter and Battery Paste Penetrometer combines the H-1250 Transfer Dish
internal switch on the timing mechanism to change and a H-1255 grease cone, which has a hardened ASTM D5
cycle to 50Hz steel tip with a special plunger. Total needle weight
Plastic transfer dish has flat bottom, straight sides
Penetrometer, Electric, 120V 60Hz H-1240 is 60g ±.050g.
and metal centering lugs with magnet in the bot-
Penetrometer, Electric, 220V 50/60Hz H-1240.4F Penetrometer for Battery Paste, Portable H-1252
Shipping wt. 9 lbs (4.08kg)
tom. Size is: 3.75" dia. x 3.25" deep (95 x 83mm).
Shipping wt. 32 lbs (15kg)
Transfer Dish H-1352
Penetrometer, Digital Deluxe Water Bath Shipping wt. 0.9 lb (0.4kg)
ASTM D5, D217, D1168, D1191, D1321, D1403, ASTM D6927, D5581 and D4867
D1831, D1855; AASHTO T49, T187 and others Microprocessor-based control for precise tem-
The H-1240D penetrometer adds a digital gauge peratures throughout the range to 180°F. Includes
to the H-1240 electric penetrometer to provide magnetic circulator, ensuring constant water tem-
precise at-a-glance readings, as well as the ability perature, and, a stainless steel shelf, which stands
2" (51mm) above the bottom of the unit for free
circulation of water above and below test samples
aided by magnetic stir bar, included. Volume is
7.76 gallons (29.40L) and dimensions are: ID: 19.5"
W x 11.5" D x 8" H (495.3 x 292.1 x 203.2mm)
Deluxe Water Bath, 120V 60Hz H-1390
Deluxe Water Bath, 220V 50/60Hz H-1390.4F H-1392
Ship wt. 44lbs. (19.9kg)
H-1352
www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300
 ASPHALT
251
Penetrometers
H-1280 H-1255

H-1300
H-2519
H-1302 H-1270

H-1310
H-1320
H-1317
Penetration Needles and Cones H-2520 H-2522 H-2524 H-2529

Standard hardened stainless steel needle, Measuring

40-45mm exposed needle length. Wt. H-1280 firmness of solid
20° aluminum cone, 3.2mm ferrule,0.8mm
2.5g. and plasticized
stainless steel blunt tip. Overall length H-1270
Bituminous fats: shorten-
Standard hardened stainless steel needle, 106mm. Wt. 45g.
materials ings, butters
40-45mm exposed needle length. Certified
ASTM D5; AAS- H-1300 AOCS Cc 16-60
to ASTM accuracy by independent labora-
HTO T49, IP49; tory. Wt. 2.5g. Recovery of
ASA Std. A37.1; 1/4 scale. (Not considered a substitute for
used grease,
Fed Spec. SS.R. Long hardened stainless steel needle, 50- full-size cone specified in ASTM D217.) Wt. H-2519
H-1290 small samples
406C, Meth. 55mm exposed needle length. Wt. 2.5g. 9.38g
ASTM D1403
214.01 Long hardened stainless steel needle, 50-
Hollow 90° brass cone, highly polished
55mm exposed needle length. Certified to Grease testing
H-1302 stainless steel tip. Removable nut and H-2520
ASTM accuracy by independent laboratory. penetrometers stem. Wt. 102.5g.
Wt. 2.5g. ASTM D217,
D937 ASA Std. Hollow 90° stainless steel cone, highly
Hardened stainless steel wax penetration
Z11.3 polished stainless tip. Removable nut and H-2522
Waxes with 250 needles with tapered point, blunt tip of
H-1310 stem. Wt. 102.5g.
or less pene- truncated cone. Ferrule is approx. 3.2mm
tration ASTM dia. Wt. 2.5g. Hollow 90° Magnesium cone and plunger.
ASTM D2884 H-2524
D1321 Total cone wt. 30.0g
Same as H-1310. Certified to ASTM accu-
H-1317
racy Food, Paste,
Hollow 90° Aluminum cone and tip. Total
Paints U.S. Dept H-2529
Hardened stainless steel tip with special wt. 35g
Battery paste H-1255 of Agriculture
plunger. Total wt. 60g ± .050g.
Applications
Joint sealant for
requiring 90·
asphalt & con- Resilience ball penetration tool. Total wt. Stainless steel replacement tip, nut and
H-1320 cones, ASTM H-2525
crete pavements 27.5g. stem.
D217, D937
ASTM D5329
ASA std. Z11.3
Moisture Boxes, Aluminum
Aluminum Moisture Boxes
OD ID Height Inside Ht. Volume Model
cu. in./fl. oz. Flat-bottom, straight-side seamless aluminum box
has tight fitting cover, which fits bottom of box as
2.650 (44cc)
2" (51mm) 1.975 (50mm) .875" (22mm) 0.865" (22mm) H-4926 well. Protects sample from exposure during stor-
1.47 (44ml)
age and weighing operations.
8.366 (137cc) Aluminum Moisture Boxes See chart at left
2.5" (64mm) 2.470 (63mm) 1.75" (44mm) 1.746" (44mm) H-4927
4.64 (137ml)
6.963 (114cc) Tin Sample Cups
3" (76mm) 3.000 (76mm) 1" (25mm) 0.985" (25mm) H-4928
3.86 (114ml) Flat-bottom, seamless tin sample cups have tele-
19.037 (312cc) scoping covers. Hold samples for determining
3.5" (89mm) 3.490 (89mm) 2" (51mm) 1.990" (51mm) H-4929
10.55 (312ml) penetrations.
Tin Sample Cups See chart at left
Sample Cups, Tin
Capacity Dimensions Quantity Model
2.5 oz (71g) 1.87" (47.5mm) ID, 1.42" (36mm) deep 48 H-1350.3A
3 oz (85g) 2.25" (57.1mm) ID, 1.42" (36mm) deep 36 H-1350.3
4.7 oz (133g) 2.42" (61.5mm) ID, 1.67" (42.6mm) deep 36 H-1350.4A
5.6 oz (159g) 2.59" (66mm) ID, 1.72" (43.4mm) deep 36 H-1350.6A
8.2 oz (232g) 3.05" (77.5mm) ID, 1.97" (50mm) deep 18 H-1350.8A
16 oz (454g) 4" (102mm) ID, 2.375" (60.3mm) deep 1 H-1350.16
H-4929 H-1350.70
42.3 oz (1200g) 6.12" (155mm) ID, 3" (76.2mm) deep 1 H-1350.42
70.5 oz (2000g) 6.12" (155mm) ID, 5" (127mm) deep 1 H-1350.70

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

 ASPHALT
250
Penetrometers

H-1240D

H-1240
H-1200

H-1250 H-1252

Penetrometer, Universal to automatically start a test with a button push and Water Bath
ASTM D5, D217, D1168, D1321, D1403, D1831, have the test end after a preset duration. ASTM D6927, D5581 and D4867
D5329; AASHTO T49, T187 and others Penetrometer, Digital, 120V 60Hz H-1240D Microprocessor-based control for precise tempera-
Direct-reading instrument for precision penetration Penetrometer, Digital, 220V 50/60Hz H-1240D.4F tures throughout the range. Includes a stainless
Shipping wt. 26.2 lbs (11.8kg)
measurements of bituminous materials, cement, steel shelf, which stands 2" (51mm) above the bot-
petrolatum and waxes, as well as food, cosmetics Penetrometer for Battery Paste tom of the unit for free circulation of water above
and pharmaceutical products. Unit has 5" diam- Battery Paste Penetrometer combines the H-1200 and below test samples. Volume is 7.76 gallons
eter indicator dial, graduated in 400 divisions of and a H-1255 grease cone, which has a hardened (29.40L) and dimensions are: ID: 19.5" W x 11.5" D
0.1mm, corresponding to 40mm penetration. Zero steel tip with a special plunger. Total needle weight x 8" H (495.3 x 292.1 x 203.2mm).
preset to eliminate errors. Includes 47.5g plunger is 60g ±.050g. Deluxe Water Bath, 120V 60Hz H-1392
with 3.2mm hole, and two loading weights (50g Penetrometer for Battery Paste H-1202 Deluxe Water Bath, 220V 50/60Hz H-1392.4F
Shipping wt. 25 lbs (11kg)
and 100g). Overall dim. 10.5" x 13" x 22" (266.7 x Ship wt. 43lbs. (19.5kg)
330.2 x 558.8mm). Penetrometer, Portable Economy Water Bath
Penetrometer, Universal H-1200 ASTM D5, D217, D1168, D1191, D1321, D1403, Low-cost alternative water bath for heating spec-
Shipping wt. 25 lbs (11kg) D1831, D1855; AASHTO T49, T187 and others imens holds eight standard 4" stability molds.
Penetrometer, Electric Lighter and smaller than H-1200 for field work, Supporting shelf above the bottom allows water
ASTM D5, D217, D1168, D1191, D1321, D1403, unit’s micrometer adjusts for accurate settings, as circulation around specimens. Automatic thermo-
D1831, D1855; AASHTO T49, T187 and others well as coarse adjustment for approximate set- static control with a range of 150° to 500°F (65°
Takes our H-1200 universal penetrometer and tings. Only one additional 50g loading weight is to 160°C). ID 11.5" x 19.5" x 5.5" (293 x 497 x
adds an automatic digital timer to it. The timer's included with a H-1280 needle. Overall dim. 7" x 140mm) deep. H-1380.4F uses a step-down trans-
release mechanism is switchable between seconds 7" x 16" (178 x 178 x 406mm). former, which is included, for electric conversion.
minutes, or hours. Timer may be set in 1/10th sec- Penetrometer, Portable H-1250 Deluxe Water Bath, 120V 60Hz H-1380
Shipping wt. 14 lbs (6.3kg)
ond intervals. Plunger releases with push of a but- Deluxe Water Bath, 220V 50/60Hz H-1380.4F
ton, and automatically stops after the preset time Penetrometer for Battery Paste, Portable Ship wt. 18lbs. (18.16kg)
duration. H-1240.4F adds a voltage adapter and Battery Paste Penetrometer combines the H-1250 Transfer Dish
internal switch on the timing mechanism to change and a H-1255 grease cone, which has a hardened ASTM D5
cycle to 50Hz steel tip with a special plunger. Total needle weight
Plastic transfer dish has flat bottom, straight sides
Penetrometer, Electric, 120V 60Hz H-1240 is 60g ±.050g.
and metal centering lugs with magnet in the bot-
Penetrometer, Electric, 220V 50/60Hz H-1240.4F Penetrometer for Battery Paste, Portable H-1252
Shipping wt. 9 lbs (4.08kg)
tom. Size is: 3.75" dia. x 3.25" deep (95 x 83mm).
Shipping wt. 32 lbs (15kg)
Transfer Dish H-1352
Penetrometer, Digital Deluxe Water Bath Shipping wt. 0.9 lb (0.4kg)
ASTM D5, D217, D1168, D1191, D1321, D1403, ASTM D6927, D5581 and D4867
D1831, D1855; AASHTO T49, T187 and others Microprocessor-based control for precise tem-
The H-1240D penetrometer adds a digital gauge peratures throughout the range to 180°F. Includes
to the H-1240 electric penetrometer to provide magnetic circulator, ensuring constant water tem-
precise at-a-glance readings, as well as the ability perature, and, a stainless steel shelf, which stands
2" (51mm) above the bottom of the unit for free
circulation of water above and below test samples
aided by magnetic stir bar, included. Volume is
7.76 gallons (29.40L) and dimensions are: ID: 19.5"
W x 11.5" D x 8" H (495.3 x 292.1 x 203.2mm)
Deluxe Water Bath, 120V 60Hz H-1390
Deluxe Water Bath, 220V 50/60Hz H-1390.4F H-1392
Ship wt. 44lbs. (19.9kg)
H-1352
www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300
 ASPHALT
251
Penetrometers
H-1280 H-1255

H-1300
H-2519
H-1302 H-1270

H-1310
H-1320
H-1317
Penetration Needles and Cones H-2520 H-2522 H-2524 H-2529

Standard hardened stainless steel needle, Measuring

40-45mm exposed needle length. Wt. H-1280 firmness of solid
20° aluminum cone, 3.2mm ferrule,0.8mm
2.5g. and plasticized
stainless steel blunt tip. Overall length H-1270
Bituminous fats: shorten-
Standard hardened stainless steel needle, 106mm. Wt. 45g.
materials ings, butters
40-45mm exposed needle length. Certified
ASTM D5; AAS- H-1300 AOCS Cc 16-60
to ASTM accuracy by independent labora-
HTO T49, IP49; tory. Wt. 2.5g. Recovery of
ASA Std. A37.1; 1/4 scale. (Not considered a substitute for
used grease,
Fed Spec. SS.R. Long hardened stainless steel needle, 50- full-size cone specified in ASTM D217.) Wt. H-2519
H-1290 small samples
406C, Meth. 55mm exposed needle length. Wt. 2.5g. 9.38g
ASTM D1403
214.01 Long hardened stainless steel needle, 50-
Hollow 90° brass cone, highly polished
55mm exposed needle length. Certified to Grease testing
H-1302 stainless steel tip. Removable nut and H-2520
ASTM accuracy by independent laboratory. penetrometers stem. Wt. 102.5g.
Wt. 2.5g. ASTM D217,
D937 ASA Std. Hollow 90° stainless steel cone, highly
Hardened stainless steel wax penetration
Z11.3 polished stainless tip. Removable nut and H-2522
Waxes with 250 needles with tapered point, blunt tip of
H-1310 stem. Wt. 102.5g.
or less pene- truncated cone. Ferrule is approx. 3.2mm
tration ASTM dia. Wt. 2.5g. Hollow 90° Magnesium cone and plunger.
ASTM D2884 H-2524
D1321 Total cone wt. 30.0g
Same as H-1310. Certified to ASTM accu-
H-1317
racy Food, Paste,
Hollow 90° Aluminum cone and tip. Total
Paints U.S. Dept H-2529
Hardened stainless steel tip with special wt. 35g
Battery paste H-1255 of Agriculture
plunger. Total wt. 60g ± .050g.
Applications
Joint sealant for
requiring 90·
asphalt & con- Resilience ball penetration tool. Total wt. Stainless steel replacement tip, nut and
H-1320 cones, ASTM H-2525
crete pavements 27.5g. stem.
D217, D937
ASTM D5329
ASA std. Z11.3
Moisture Boxes, Aluminum
Aluminum Moisture Boxes
OD ID Height Inside Ht. Volume Model
cu. in./fl. oz. Flat-bottom, straight-side seamless aluminum box
has tight fitting cover, which fits bottom of box as
2.650 (44cc)
2" (51mm) 1.975 (50mm) .875" (22mm) 0.865" (22mm) H-4926 well. Protects sample from exposure during stor-
1.47 (44ml)
age and weighing operations.
8.366 (137cc) Aluminum Moisture Boxes See chart at left
2.5" (64mm) 2.470 (63mm) 1.75" (44mm) 1.746" (44mm) H-4927
4.64 (137ml)
6.963 (114cc) Tin Sample Cups
3" (76mm) 3.000 (76mm) 1" (25mm) 0.985" (25mm) H-4928
3.86 (114ml) Flat-bottom, seamless tin sample cups have tele-
19.037 (312cc) scoping covers. Hold samples for determining
3.5" (89mm) 3.490 (89mm) 2" (51mm) 1.990" (51mm) H-4929
10.55 (312ml) penetrations.
Tin Sample Cups See chart at left
Sample Cups, Tin
Capacity Dimensions Quantity Model
2.5 oz (71g) 1.87" (47.5mm) ID, 1.42" (36mm) deep 48 H-1350.3A
3 oz (85g) 2.25" (57.1mm) ID, 1.42" (36mm) deep 36 H-1350.3
4.7 oz (133g) 2.42" (61.5mm) ID, 1.67" (42.6mm) deep 36 H-1350.4A
5.6 oz (159g) 2.59" (66mm) ID, 1.72" (43.4mm) deep 36 H-1350.6A
8.2 oz (232g) 3.05" (77.5mm) ID, 1.97" (50mm) deep 18 H-1350.8A
16 oz (454g) 4" (102mm) ID, 2.375" (60.3mm) deep 1 H-1350.16
H-4929 H-1350.70
42.3 oz (1200g) 6.12" (155mm) ID, 3" (76.2mm) deep 1 H-1350.42
70.5 oz (2000g) 6.12" (155mm) ID, 5" (127mm) deep 1 H-1350.70

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

 ASPHALT
257
Softening Point

Shown with
Thermometers, H-1575 H-1588
not included,
order separately

H-8900
H-1569

H-8980

Description Model
Brass, shouldered ring, Top:
H-1596 23mm OD, 19.8mm ID; Bottom:
H-1595 19mm OD, 15.9mm ID; Top to
H-1570 H-1575
Shoulder: 4.4mm High; Shoul-
Softening Point Apparatus, Double Softening Point Apparatus Set w/ Hotplate der to Bottom: 2mm High, 10
ASTM D36, E28; AASHTO T53 ASTM D36, E28; AASHTO T53 per package
Softening Point Test Individual Components
Ring and ball method Apparatus for softening Single ring and ball method softening point appa- Hardened steel ball, .375"
point determinations for use with asphalts, pitches, ratus set, including hotplate. This set can be used 99.5mm) dia.; weight between H-1580
tars and most resins. Includes 800ml beaker with for single determinations such as: asphalts, pitches, 3.45 and 3.55g, 10 per package
brass, double set-up fixture with cover and ther- tars and most resins. Includes 6" x 6" electric hot- Ball centering guide for shoul-
mometer port with stopper, 2 shouldered rings, 2 plate as a heat source rather than a gas burner. dered rings, ball is centered H-1588
ball centering guides and 2 standard balls. Order The hotplate provides an easy-to-set analog tem- on specimen by 3 locator pins
required thermometer separately. perature control knob with graduated scale and
LED display. Temperature range is: ambient to Ring and stem assembly with
Softening Point Apparatus, Double H-1569
540°C (Ambient to 1004°F). Includes beaker, sup- 16" (406mm) long brass wire H-1602
Shipping wt. 2lbs (.9kg)
port stand, 1 ring, wire gauze with ceramic center, stem with shouldered brass ring
Softening Point Apparatus, Quad
thermometer clamp, 1 shouldered ring and stem Steel, clamp hook supports sus-
ASTM D36, E28; AASHTO T53
with hardened steel ball. Order required ther- pended thermometers. Locks
Ring and ball method Apparatus for softening
mometer separately. into any position with check nut,
point determinations for use with asphalts, pitches,
Softening Point Apparatus Set w/Hotplate Maximum distance from center H-8900
tars and most resins. Includes burner, beaker, sup-
120V 60Hz H-1596 of muff to hook: 4.25" (108mm),
port stand, 4 rings, wire gauze with ceramic cen- 220V 50/60Hz H-1596.4F minimum distance is: 3.875"
ter, thermometer clamp, 4 shouldered rings and Shipping wt. 18.4lbs (8.3kg) (89mm)
stems with hardened steel ball. Order required
thermometer separately. Thermometers* for Softening Point Apparatus Thermometer clamp with
Softening Point Apparatus, Quad H-1570 adjustable 360° muff, phos-
Description Model H-8950
Shipping wt. 2lbs (.9kg)
phor-bronze jaws, 3.5" (89mm)
30 to 180°F (ASTM 15F) H-2600.15F long
Softening Point Apparatus Set w/ Burner
ASTM D36, E28; AASHTO T53 -2 to 80°C (ASTM 15C) H-2610.15C Thermometer clamp, similar to
H-8950, but holds H-1602 ring
Single, ring and ball method softening point 85 to 392°F (ASTM 16F) H-2600.16F H-8980
and stem and thermometer
apparatus set, including burner. This set can be
30 to 200°C (ASTM 16C) H-2610.16C together
used for single determinations such as: asphalts,
pitches, tars and most resins. Includes burner, 30 to 350°F (ASTM 113F) H-2600.113F Base (Cast iron) w/ Support Rod H-21220
beaker, support stand, 1 ring, wire gauze with -1 to 175°C (ASTM 113C) H-2610.113C Burner H-6220
ceramic center, thermometer clamp, 1 shoul-

*
Beaker, 800ml, Graduated H-4911.800
dered ring and stem with hardened steel ball.
Order required thermometer separately.
CAUTION Hot plate, 6" x 6"
These thermometers contain mercury. There
H-4942
Softening Point Apparatus Set w/Burner H-1595 with LED Display
are restrictions on their sale and shipment. Please check
Shipping wt. 10lbs (4.5kg) laws in your area or contact us before ordering. Due to Wire Gauze, 5" x 5" w/ceramic
H-25865
Illinois law, Humboldt must drop-ship these items from New material center
Jersey. Mercury Thermometers require ground shipment in
the U.S. International and air shipments ship as Dangerous
Goods.

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

 PAVEMENT
269
Core Drills

HR-2701

HR-2503E

HR-2600

Core Drill, Mobile Stand, Gas-Powered Core Drill, Hitch-Mounted Core Drill, Trailer-Mounted
This core drill reduces job costs through the faster This hitch-mounted system provides a mobile sys- This complete stand-alone core drill rig offers field
drilling speeds gained from the use of a gas-pow- tem, which provides fast set-up and drilling while independence, versatility, dependability, and easy
ered motor. This drill can be wheeled into place ensuring consistent quality. Setup minimizes time single-person operation. Provides mobile yet very
easily when mounted on its heavy-duty, sturdy plat- required to do jobs reducing job costs. stable drilling platform, which extends bit life. Pro-
form or can also be mounted to a trailer, pickup Features include: vides exceptional solution for remote locations.
or van. • 15 HP gas-powered, electric-start drill head Features include:
Features include: with electric start, with 16" bit capacity • 17 HP gasoline-powered drill head with
• 17 HP gas-powered, electric-start drill head • Accurate drilling with easy positioning and electric start, with 16" bit capacity and a 24"
with electric start, with 8" or 16" bit capacity alignment of drill head travel;
• Accurate and easy drill positioning and plat- • Positioning arm swings 180° in semi-circle • Variable drill head positioning system, which
form movement with its 4" Delrin wheels • Multi-jointed arm allows drilling anyway within allows drill head movement of approx. 43"
• Dead-weight base no anchor bolts required the arc of trailer-hitch mount side-to-side and 12" fore and aft for accurate
• Drill stand • Stand-alone, gasoline-powered system— no hole placement;
Standard package includes: additional power supplies needed • Hydraulic-assisted machine lift for single-hand-
• Drill stand • Easy, one-person mounting or removal using ed removal and replacement of drill;
• 17 HP gasoline-powered, electric-start engine machine's own drill caddy • Lockable, weather-resistant toolbox;
• Variable RPM (300-1500 bit RPM) Standard package includes: • 200-gal. water tank and 12 VDC water pump
• Water swivel • Drill Head with up to 16" bit capacity • 5' x 8' steel-construction trailer, equipped with
• Flexible position receiver mount bracket electric brakes and pre-wired for brake and tail
HR-2503E and HR-2504
• Drill caddy lights.
Horse power 17
• Variable RPM (300-1500 bit RPM) HR-2600 and HR-2601
Cycle 4 • Water swivel
Horse power 17
HR-2503E bit capacity 8" • Drive shaft stabilizer system
HR-2504 bit capacity 16" Cycle 4
HR-2700 and HR-2701
Auger capacity NA HR-2600 bit capacity
Horse power 15 16"
HR-2601 bit capacity
Core Drill, Mobile Gas-Powered — 8" HR-2503E Cycle 4 HR-2600 auger capacity NA
Core Drill, Mobile Gas-Powered — 16" HR-2504 HR-2700 bit capacity HR-2601 auger capacity 8"
Ship wt. 413lbs. (187kg) 16"
HR-2701 bit capacity Carriage travel 24"
HR-2700 auger capacity NA
HR-2701 auger capacity 8" Core Drill, Trailer-Mount 16" Capacity HR-2600
Core Drill, Trailer-Mount, Auger Capability HR-2601
Ship wt. 2000lbs. (907kg)
Core Drill, Hitch-Mount 16" Capacity HR-2700
Core Drill, Hitch-Mount, Auger Capability HR-2701
Ship wt. 604lbs. (274kg)

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

 ASPHALT
263
Extraction

H-1461

H-1451 H-1456

Asphalt Centrifuge Extractor (Explosion Proof) Centrifuge Extractor (Explosion Proof) display that shows the settings. The controller can
ASTM D2172; AASHTO T164 ASTM D2172; AASHTO T164 also be wall- or remotely-mounted for visual ease
The asphalt centrifuge extractor is designed Available in 1500g and 3000g capacities, these as well as vibration isolation.
for determining the percentage of bitumen in extractors conform to the explosion-proof stan- Power is supplied by a reliable 1/8hp DC motor.
asphaltic mixtures. Available in 1500g and 3000g dards for the safety of operating personnel. Extractors are supplied complete with 25 filter
capacities, these extractors conform to the explo- All models feature a removable aluminum bowl discs. Replacement filter discs (100-packs) are
sion-proof standards for the safety of operating assembly, which quickly lifts out of the sealed hous- available, see page: 188.
personnel. ing for efficient specimen handling. A simple, con- Extractor, 1500g, 115V 60Hz H-1461
All models feature a removable, aluminum bowl trol knob adjusts bowl speed. The heavy, cast-alu- Extractor, 1500g, 220V 50/60Hz H-1461.4F
assembly, which quickly lifts out of the sealed minum bowl cover latches securely in place and Extractor, 1500g, 115V 60Hz H-1465
housing for efficient specimen handling. A sim- features an integral solvent dispensing cup for easy Extractor, 1500g, 220V 50/60Hz H-1465.4F
Shipping wt. 114lbs (51.7kg)
ple, control knob adjusts bowl speed up to 3600 pouring of the solvent into the bowl.
rpm, and, an electric brake stops the centrifuge in Auto Centrifuge Extractor (Open Motor)
Extractors are supplied complete with 25 filter
seconds when extraction is complete. The heavy, ASTM D2172; AASHTO T164
discs. Replacement filter discs (100-packs) are
cast-aluminum bowl cover latches securely in place This extractor is an open-motor version of the
available, see page: 188.
and features an integral solvent dispensing cup for explosion-proof models described above. While it
Dimensions: both sizes: 18" x 18" x 18" (457 x 457
easy pouring of the solvent into the bowl. Power is is safe to operate, it does not provide the added
x 457mm).
supplied by a reliable 1/8hp DC motor. Extractors safety of the explosion-proof design. This extractor
Extractor, 1500g, 115V 60Hz H-1466 is a great economical choice or for those who need
are supplied complete with 25 filter discs. Replace-
Extractor, 1500g, 220V 50/60Hz H-1466.4F
ment filter discs (100-packs) are available, see an extractor, but may not use it extensively. Not
Extractor, 3000g, 115V 60Hz H-1473
page: 188. available in 220V model.
Extractor, 3000g, 220V 50/60Hz H-1473.4F
Dimensions: 1500g units: 12" x 20" x 22" (305 x Shipping wt. 75lbs (34kg) Centrifuge Extractor, 1500g, 115V 60Hz H-1460
Centrifuge Extractor (Open Motor) Centrifuge Extractor, 3000g, 115V 60Hz H-1464
508 x 559mm); 3000g units: 14" x 20" x 22" (356 x Shipping wt. 76lbs (34.4kg)
508 x 559mm). ASTM D2172; AASHTO T164
Extractor, 1500g, 115V 60Hz H-1451 This extractor is an open-motor version of the Centrifuge Extractor Replacement Parts
Extractor, 1500g, 220V 50/60Hz H-1451.4F explosion-proof models described above. While it Description Model
Extractor, 3000g, 115V 60Hz H-1474 is safe to operate, it does not provide the added
Extractor, 3000g, 220V 50/60Hz H-1474.4F Bowl for H-1456, H-1466 H-1456B
safety of the explosion-proof design. This extractor
Shipping wt. 85lbs (38.5kg)
is a great economical choice or for those who need Bowl for H-1471, H-1473 H-1471B
Asphalt Centrifuge Extractor (Open-Motor) an extractor, but may not use it extensively. Not Bowl cover, H-1456, H-1466 H-1456BC
ASTM D2172; AASHTO T164 available in 220V model. Bowl cover, H-1456, H-1466 H-1471BC
This extractor is an open-motor version of the Extractor, 1500g, 115V 60Hz H-1456 Cover nut H-1471N
explosion-proof models described above. While it Extractor, 3000g, 115V 60Hz H-1471
Clamp, all models H-1471C
is safe to operate, it does not provide the added Shipping wt. 70lbs (31.7kg)
safety of the explosion-proof design. Available Auto Centrifuge Extractor, (Explosion Proof) O-Ring, all models H-1471RV
only in a 1500g model, this extractor is a great eco- ASTM D2172; AASHTO T164 Brake band, all models H-1456BB
nomical choice or for those who need an extractor, These extractors feature automated, auto control Brake band assembly, all H-1471BBA
but may not use it extensively. of the unit. Timer allows unit to run unattended
Extractor, 1500g, 115V 60Hz H-1452 for a specific period of time (1 to 10 minutes). See page 264 for centrifuge extractor filter paper.
Extractor, 1500g, 220V 50/60Hz H-1452.4F Unit brakes and stops automatically when time
Shipping wt. 90lbs (40.8kg)
expires and holds last test cycle settings in mem-
ory for repeatable tests. Time and speed can be
set quickly with the rotating dials below the digital

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

 ASPHALT
220
Marshall and SCB Load Frames
See pages 112-115 for more information on
the HM-5030 Master Loader and its Stand-alone
and Computer-controlled capabilities

road construction to high-volume commercial and

educational laboratories.
While the HM-5030 has been specifically designed
for soil testing labs conducting multiple testing
operations including: UU, CU and CD triaxial, UC,
CBR and LBR, it is also perfect for running Mar-
shall, Hveem, TSR and SCB asphalt tests as well. Its
heavy-duty design and precise stepper-motor con-
trol provide a stable platform for years of reliable
service allowing the HM-5030 to perform any tests
required up to its load capacity of 11000 lbf (50kN).
Like all Elite Series load frames, the HM-5030 is
built around Humboldt's integral, 4-channel data
logger with touch-screen control, which allows
the load frame to be used as a standalone device
capable of full test control and data logging. It can
also be controlled by a networked computer at any
location with access to the network.

Load capacity 11000 lbf (50kN)

0 - 3.0000 in/min. These new waterproof, touch screens provide col-
Speed range orful, at-a-glance monitoring of testing functions
0 - 75.0000 mm/min.
without the use of a computer. Operators can see
Data channels 4
all the data in several formats at the machine while
Platen Size / Travel 10" (254mm) / 4" (100mm) the test is running. Data can then be transfered to
1000 tests and up to a computer for use with Humboldt's Next Software
Data storage
HM-5030.3F 3000 readings per test for report generation.
The HM-5030 Master Loader provides the ultimate Clearance, vertical 40" (1000mm) This machine can also be controlled from a com-
solution for a lab looking to perform Marshall, Clearance, horiz. 15" (380mm) puter using Humboldt's NEXT software. This
Hveemand SCB testing, but would also like to be software provides robust machine control, data
Voltage 110/220V 50/60Hz. 5.0 amps
able to use the load frame for all their other testing acquisition and report generation. Because the
needs as well. The digital MasterLoader provides Master Loader, 110/220V 50/60 Hz HM-5030.3F HM-5120 is connected to your network, your com-
that ability by easily handling asphalt compression Shipping wt. 300 lb (136kg) puter can be placed in the your lab, in the next
testing, as well as soil tests such as CBR and triaxial Marshall, TSR, SCB Load Frame room or at a different location. Adding the Mar-
tests including UU, CU, CD and UC. ASTM D5581, D6926, D6931; AASHTO T245, shal-specific Software Module allows you to better
The digital MasterLoader has the ability to work T283; BS 598; EN12697-34 control your Marshall test by guiding you through
as a stand-alone unit, which can perform Marshall the specific process.
HM-5120 Loader has been specifically designed
tests at the push of a button; or with the aid of to handle Marshall, TSR and SCB applications. Its The HM-5120 is sold as a Load Frame ONLY, refer
Humboldt's NEXT software, the Marshall software heavy-duty design and precise stepper-motor con- to the recommended accessories chart for items
module and a computer, it can be automated trol provide a stable platform for years of reliable needed to perform Marshall and TSR and SCB
to run tests and gather data in real-time data service. From educational institutions and consult- testing.
acquisition in the form of charts and graphs. The ing firms to high-volume commercial labs and con-
HM-5030 is ideal for road construction projects Load capacity 11000 lbf (50kN)
struction projects, the HM-5120 Loader can handle
in either mobile or fixed labs, educational institu- 2 in/min.
these applications with ease. Speed range
tions and consulting firms. 50.8mm/min.
The HM-5120 is built around Humboldt's inte-
Data channels 2
gral, data logger with touch-screen control, which
Humboldt MasterLoader Marshall Solution
allows the load frame to be used as a standalone Platen Size / Travel 10" (254mm) / 4" (100mm)
ASTM D5581, D6926, D6931; AASHTO T245,
device capable of full test control and data log- 1000 tests and up to
T283; BS 598; EN12697-34 Data storage
ging. It can also be controlled by a networked 3000 readings per test
Designed for applications requiring multi-purpose
computer at any location with access to the net- Clearance, vertical 40" (1000mm)
loading systems, such as road construction projects
work. Adding the Marshal-specific Software Mod-
in either mobile or fixed labs, educational institu- Clearance, horiz. 15" (380mm)
ule allows you to better control your Marshall test
tions and consulting firms, the HM-5030 Master Voltage 110/220V 50/60Hz. 5.0 amps
procedure. The HM-5120 is sold as a Load Frame
Loader is ideal for just about any application from
ONLY, refer to the recommended accessories chart
for items needed to perform Marshall and TSR and Marshall Load Frame, 110/220V 50/60 Hz HM-5120.3F
Shipping wt. 300 lb (136kg)
SCB testing.

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

 SOIL MECHANICS
134
Data Acquisition

HM-2300.020

HM-2003E

HM-2300.020P
shown mounted
HM-2300.100 on crossbar with
LSCT and ram

H-4178.2
HM-2300.020S

S-type Load Cells Submersible Load Cells Pancake Load Cells

Load cells are bi-directional for compression loads. For those concerned with reducing the effects of Pancake-design load cells are available for those
Constructed from stainless steel. Load cells can hysteresis on testing results, we offer a submersible who want to use a load cell design that theoret-
be used with various instrumentation to measure load cell, which is designed to work within the tri- ically provides the least amount of deflection in
loads. Includes: 6 ft. cable with 5-pin DIN plug axial cell. Positioning the load cell within the triaxial applications.
and calibration certificate. cell eliminates the possible drag effect introduced
Performance Specifications
by using a plunger between the sample and an
Performance Specifications externally-mounted load Overload Capacity: 150%
Excitation voltage: 10 VDC, max.15 VDC Performance Specifications Excitation Voltage: 20 VDC, Maximum
Rated output: 3.0 mv/V minimum Overload Capacity: 200% Non-linearity: 0 ± 0.05% Full Scale Output
Non-linearity: 0.03% full scale Output Excitation Voltage: 10 VDC, Maximum Hysteresis: 0.05% Full Scale Output
Hysteresis: 0.02% FSO Non-linearity: 0 ± 0.05% Full Scale Output Diameter: 4.13" (104.8mm)
Non-repeatability: 0.01% FSO Hysteresis: 0.05% Full Scale Output Cable Length: 79" (2m)
Creep (30 minutes): 0.03% FSO Diameter: 3" (75mm) Height:
2.5" (63.5mm)
Zero balance: ±1.0% FSO (excluding Ram)
Cable Length: 79" (2m)
Bridge resistance: Height: Load Cell, 2000 lbf (10 kN) HM-2300.020P
2" (50mm)
Input: 350 ohms, nominal (excluding Ram) Load Cell, 5000 lbf (25 kN) HM-2300.050P
Load Cell, 10000 lbf (50 kN) HM-2300.100P
Output: 350 ohms, ±3.5 ohms
Load Cell, 1000 lbf (5 kN) HM-2300.010S Load Cell, 15000 lbf (75 kN) HM-2300.150P
Overload: Load Cell, 25000 lbf (125 kN) HM-2300.250P
Load Cell, 2000 lbf (10 kN) HM-2300.020S
Safe static: 150% of capacity Load Cell, 5000 lbf (25 kN) HM-2300.050S Load Cell, 50000 lbf (250 kN) HM-2300.500P
Shipping wt. 1 lb (0.45kg) Shipping wt. 11 lb (5kg)
Ultimate: 175% of capacity
Temperature: Platen, Swivel Top
4.25" (108mm) diameter top swivel platen.
Compensated range: 0-150°F
Platen, Swivel Top HM-2003E
Effect on output: 0.0006% FSO/°F Load Cells are wired for use with Humboldt Shipping wt. 5.2 lb (2.35kg)

Effect on zero: 0.0008% FSO/°F Equipment. Please contact us when needing Stud, Threaded
Nickel-plated wiring for other manufacturers' equipment. Threaded stud for attaching S-type load cells to
Finish:
or stainless steel load frame cross beams.
Seal: Waterproof Stud, Threaded H-4178.2
Shipping wt. 0.2 lb (0.09kg)

Load Cell, 500 lbf (2.5 kN) HM-2300.005

Load Cell, 1000 lbf (5 kN) HM-2300.010
Load Cell, 2000 lbf (10 kN) HM-2300.020
Load Cell, 5000 lbf (25 kN) HM-2300.050
Load Cell, 10000 lbf (50 kN) HM-2300.100
Shipping wt. from 1 lb (0.45kg) to 3.5 lbs (1.6kg)

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

 SOIL MECHANICS
135
Data Acquisition

HM-4170
HM-2310.10

HM-4170B

HM-2305.10

HM-2350
HM-2360

HM-4193BR
HM-4172
HM-2305BRT
HM-2310BR

HM-4178BRT HM-4175

Linear Strain Conversion Transducers (LSCT) LSCT Triaxial Mounting Bracket Digital Pressure Transducer
Extremely accurate and reliable strain gauge instru- Bracket used in mounting LSCT or dial gauge to the Solid state transducer/readout unit incorpo-
ments. Compact size does not require a module. upper part of a triaxial cell with a 0.625" (15.5mm) rates the latest semiconductor technology into a
High resolution and performance superior to LVDT. dia. ram for strain measurement. (HM-2310BR also high-quality, yet inexpensive strain gauge. Three-
Stainless steel casing for environmental protection. required for use with LSCT.) digit readout display has ±.25% of full scale accu-
Operating temperature range 0 to 70°C. Requires LSCT Triaxial Mounting Bracket HM-4193BR racy—comparable to others at twice the cost. Bat-
input of 10V dc; output up to 6.5 mV per volt. Shipping wt. 2 lbs (0.9kg) tery operated with very long battery life—typically
• Less than 250g spring force on spindle up to 5 years. On/off button at top of readout has
Linear Strain Transducer Bracket
factory set “on” time built into the memory. Read-
• Non-linearity better than ± 0.1% of full scale Bracket used to mount HM-2305 LSCTs.
out shuts off automatically after 20 minutes.
deflection
Linear Strain Transducer Bracket HM-2305BRT Digital Pressure Transducer HM-4172
• Hysteresis-compensated with linearity better Shipping wt. 0.7 lb (0.32kg)
Shipping wt. 2 lbs (0.9kg)
than ± 0.1% of full scale in both directions
Transducer Data Extension Cable AC Adapter, 120V 60Hz
• Negligible temperature effect Data extension cable for use with load cells, LSCT or AC adapter for digital indicator, allows indicator to
LSCT, 0.4" (10mm) HM-2310.04 pressure devices. Cable is 25ft.(7.6m) length.
LSCT, 1.0" (25mm) HM-2310.10 run off AC power.
Transducer Data Extension Cable HM-2310C AC Adapter, 120V 60Hz HM-4469AC
LSCT, 2.0" (50mm) HM-2310.20
Shipping wt. 1 lb (0.45kg)
Shipping wt. 0.8 lb (0.36kg) Shipping wt. 0.6 lb (0.27kg)
Pore Pressure Transducer Data Cable
Linear Potentiometer Transducers (LPT)
Highly accurate, 200 psi (1400 kPa) pore pressure Data cable for digital indicator, used with
Accurate and reliable strain gauge instruments for
transducer. Designed for geotechnical lab appli- HM-2330D.3F Humboldt Logger.
use with Humboldt's HM-5150 and HM-5120 Load
cations with outstanding overload protection and
Frames. Data Cable HM-4469C
protected from corrosive water. Requires input of
Linear Potentiometer Transducer 1.0" (25mm) HM-2305.10 Shipping wt. 0.5 lb (0.23kg)
10 V DC, with an output of 100 mV. Supplied with 2
Linear Potentiometer Transducer 2.0" (50mm) HM-2305.20 Multi-Device Cable
meter cable and 5-pin DIN plug.
Shipping wt. 0.8 lb (0.36kg)
Allows one computer to control multiple dai-
Pore Pressure Transducer HM-4170
LSCT Displacement Transducer Bracket sy-chained machines.
Shipping wt. 0.8 lb (0.36kg)
Bracket used with CBR piston. Multi-Device Cable HM-000379
De-Airing Block
Shipping wt. 1 lb (0.45kg)
LSCT Displacement Transducer Bracket HM-4178BRT For use with pore pressure transducer
Shipping wt. 0.7 lb (0.32kg) Single-Channel Displays
De-Airing Block HM-4170B
LSCT/LVDT Contact/Mounting Bracket Shipping wt. 1 lb (0.45kg)
The HM-2350 provides 4-digit accuracy and the
Bracket used in mounting LSCT to equipment in HM-2360 provides 6-digit accuracy.
Digital Pore Pressure Set
replacement of dial gauge. Single-Channel Display, 120V 60Hz HM-2350
For accurately measuring and monitoring pore
LSCT/LVDT Mounting Bracket HM-2310BR Single-Channel Display, 220V 50/60Hz HM-2350.4F
water pressures and back pressure. For determin-
Shipping wt. 0.1 lb (0.04kg) Single-Channel Display, 120V 60Hz HM-2360
ing level of saturation (“B” parameter) during satu-
Single-Channel Display, 220V 50/60Hz HM-2360.4F
ration stages of triaxial/permeability tests. Includes
Shipping wt. 6 lb (2.7kg)
readout, pore pressure transducer, and de-airing
block assembly.
Digital Pressure Set, 120V 60Hz HM-4175
Digital Pressure Set, 220V 50/60Hz HM-4175.4F
Shipping wt. 7 lb (3.1kg)

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

 ASPHALT
221
Marshall and SCB Load Frames
HM-5005SW
Humboldt's HM-5030 amd HM-5120 load frames Marsahll Software
are part of our Elite Series of load frames, which Module
provide both stand-alone and computer control
options. In stand-alone mode, these load frames
provide a 7" (178mm) touch-screen controller.
These new waterproof, touch screens provide col-
orful, at-a-glance monitoring of testing functions
without the use of a computer. Operators can see See page 94-95 for
all the data in several formats at the machine while more information
the test is running. Data can then be viewed simul- on Humboldt's
taneously or downloaded later to a computer in NEXT Software.
the lab, in the next room or at a different location,
while also providing report generation capabili-
ties from within Humboldt's NEXT software or our
enhanced test-specific modules. • Reports can also be exported to Excel or
Stand-Alone Control a CSV file, if desired, and, we can provide
Touch-Screen Controller provides: custom integration/export solutions for LIMS,
• multi-channel data acquisition EQuIS, gINT, etc.
• Hi-res, 7", waterproof, touch-screen
NEXT Marshall Software Module
provides total control and real-time
ASTM D5581, D6926, D6931; AASHTO T245,
graphical display of tests
T283; BS 598; EN12697-34
• Machine/Test control and data acquisition
via touch-screen Humboldt's NEXT software is used to control the
• Control both channels at the same time operation of Humboldt's testing machines, as well
• Calibration of channels to load cell and as provide data acquisition and reporting of test
transducer data. The software provides a computer-based
• Real-time graphical chart and numerical platform with the ability to configure testing
display of tests via touch-screen display machines and the testing process; calibrate trans-
• Effective sampling rate of 50 readings ducers, load cells and digital indicators; specify
per second testing parameters and limits, operate the machine
• Stores up to 1000 tests with 3000 during the testing and provide detailed reports of
the data collected in tabular or graphical formats.
points per test Semi-Circular Bending setup
• 2 USB ports. One in front for data transfer From controlling a single operation to a complete
shown on HM-5030
and the rear port is for powering a wireless geotechnical lab, Humboldt's NEXT data acquisi-
access point. tion software, in conjunction with compatible Hum-
Computer Control boldt testing equipment, provides a complete
Humboldt's Next software is included with solution for the acquisition, recording and pre- Recommended Marshall, TSR and SCB Accessories
sentation of test data. NEXT software is included for use with HM-5030 and HM-5120 Load Frames
all Elite Series Load Frames. This software provides
robust machine control, calibration, data acquisi- with many of Humboldt's load frames, consolida-
Part # Description
tion and report generation for those using a com- tion and direct shear machines; providing robust
machine control, calibration, data acquisition and HM-2300.100 S-type load cell, 11,000lbf (50kN)
puter to control consolidation testing operations.
In addition, operators have the ability to view and report generation for those using a computer to HM-2310.10 Strain Transducer, 1" (25mm)
control testing operations from a PC in the lab, in control load frame operations. Strain Transducer, 1" (25mm)
• test-specific setup, which guides you through HM-2305.10
the next room or at a different location, while also Required for HM-5120 ONLY.
providing report generating capabilities using the the process and includes selecting data collection
HM-4178BRT Displacement transducer bracket
consolidation test-specific software module. parameters that best fit the specific test
Displacement transducer bracket
• Machine control, and data acquisition via net- • input specific project information for each test, HM-2305BRT
Required for HM-5120 ONLY.
worked computer such as project name, client information, etc
HM-5005SW Marshall software module
• Provides the ability to use Next Software's, • all test-specific initial, intermediate, and final
advanced test-specific modules parameters required by ASTM and BS standards H-1342 Marshall breaking head, 4"
• Real-time graphical chart and numerical are dynamically calculated for you, based on H-1362 Marshall breaking head, 6"
display of tests via computer display your input of specimen information, such as size,
H-1349 Lottman breaking head, 4"
• Effective sampling rate of 50 readings weight, etc
H-1369 Lottman breaking head, 6"
per second • tabulated test data, graphs and all test-specific
• Stores unlimited tests with up to calculations are provided in real time, allowing H-1351 Semi-circular Bend Test Breaking Head
3000 points per test. you to monitor tests in process
• Up to 255 individual tests can be run • generate test-specific reports that include all
simultaneously from a single PC graphs and data presented in a project
• Provides advanced graphing capabilities NEXT Marshall Software Module HM-5005SW
• Provides full-unit customization Download

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

 ASPHALT
223
Marshall Accessories

H-1342, H-1362 H-4454.100

H-1344.2
H-1342M
H-1349, H-1369 H-1344
H-1349M, H-1369M H-1351 H-4454.100D

Marshall Breaking Head, comprised of a base with two perpendicular guide Marshall Test Load Ring
ASTM D6927 rods extending vertically and an upper segment ASTM E74
Marshall breaking heads consist of an upper and mounted to the lower segment by sliding on the These calibrated load rings with dial gauges come
lower cylindrical segment having 3" inside radius vertical guide rods. The holes in the upper seg- with a unique serial numbered for positive identi-
of curvature for 6" samples and 2" for a 4" sam- ment are lined with brass to reduce binding as it fication. The dial gauges read in inches, but each
ple. The lower segment is mounted on a base with moves up and down the guide rods. In this config- load ring comes with a calibration chart showing
two perpendicular guide rods extending vertically uration the upper swivel contact bar is mounted to lbf vs. deflection in inches, kN vs. deflection in mil-
from the base. One guide rod is larger than the the upper breaking head segment. limeters and kN vs. deflection in inches for easy
other, with a correspondingly larger guide sleeve In the second configuration, the upper swivel con- conversions. Units are calibrated in lbs. force every
in the upper segment to ensure correct assembly. tact bar is separated from the upper breaking head 20 lbs. from 0 to 1,000 lbs. and every 50 lbs. from
Guide sleeves in the upper segment bring the two bar and is mounted directly to the load cell. If using 1,000 to 11,000 lbs. with adequate deflection to
sections together without appreciable binding or this method, precise alignment can be achieved by interpolate to 10 lbs., in kg force and kN. Comes
loose motion on the guide rods. using the alignment guide, which is included. with 3/4"-16 female, threaded mount.
Marshall Breaking Head, 4" H-1342 The H-1351 Semi-circular Bending Head can be 11,000 lbf (4,550kgf, 50kN) H-4454.100
Marshall Breaking Head, 6" H-1362 used in conjunction with one of the Humboldt’s 5,500 lbf (2,500kgf, 25kN) H-4454.050
Ship wt. 25lbs. (11.3kg) Ship wt. 11lbs. (4.9kg)
load frames, such as the HM-5030 Master Loader
Marshall Breaking Head, Metric or HM-5120 Marshall frames. It may also be used Marshall Test Digital Load Ring
Marshall breaking heads consist of an upper and with your present load frame, which meets the ASTM E74
lower cylindrical segment. The lower segment is test’s speed requirements. Humboldt offers addi- Calibrated load rings with digital indicators come
mounted on a base with two perpendicular guide tional Data Loggers with instrumentation for data with a unique serial numbered for positive identi-
rods extending vertically from the base. One guide acquisition of the SCB test results using the SCB fication. Each load rings comes with a calibration
rod is larger than the other, with a correspondingly breaking head when used with your present load. chart showing the relationship between deflection
larger guide sleeve in the upper segment to ensure
Semi-Circular Bending (SCB) Head H-1351 and pounds force for the individual ring. Units are
correct assembly. Guide sleeves in the upper Ship wt. 25lbs. (11.3kg) calibrated in lbf every 20 lbs. from 0 to 1,000 lbs.
segment bring the two sections together without
Dial Flowmeter Kit and every 50 lbs. from 1,000 to 11,000 lbs. with
appreciable binding or loose motion on the guide
ASTM D6927 adequate deflection to interpolate to 10 lbs.,
rods.
Used to measure flow during Marshall testing. in kg force and kN. Comes with 3/4"-16 female,
Marshall Breaking Head, 100mm H-1342M threaded mount.
Ship wt. 25lbs. (11.3kg) Consists of a special dial indicator with a maximum
position brake assembly and a guide sleeve, which 11,000 lbf (4,550kgf, 50kN) H-4454.100D
Lottman Breaking Head 5,500 lbf (2,500kgf, 25kN) H-4454.050D
ASTM D6931, AASHTO T283 fits over either guide rod of a H-1342 or H-1362
Ship wt. 11lbs. (4.9kg)
Marshall breaking head. H-1344 has a range of
Breaking heads for testing tensile strength. H-1349
1.00" with 0.01" divisions and the H-1344M has a Guide Sleeve For Flowmeter Kit
has 0.5" wide upper and lower segments for use
range of 25mm with 0.25mm divisions ASTM D6927
on 4" samples. H-1369 has 0.75" wide upper and
Dial Flowmeter Kit H-1344 Guide sleeve for use with dial gauge to measure
lower segments for use on 6" samples.
Dial Flowmeter Kit, Metric H-1344M flow during Marshall testing. Device fits over either
Lottman Breaking Head, 4" H-1349 Ship wt. 2lbs. (.9kg)
guide rod of a H-1342 or H-1362 Marshall breaking
Lottman Breaking Head, 6" H-1369
Dial Gauge For Flowmeter head and provides mounting of dial gauge.
Lottman Breaking Head, 100mm H-1349M
ASTM D6927 Guide Sleeve For Flowmeter Kit H-1344.1
Lottman Breaking Head, 150mm H-1369M
Ship wt. 10.2lbs. (4.6kg) Consists of a special dial indicator with a maximum Ship wt. 0.6lbs. (.27kg)

Semi-Circular Bending (SCB) Head position brake assembly. The H-1344 has a range
ASTM D8044; AASHTO TP124 of 1.00" with 0.01" divisions and the H-1344M has
The H-1351 Semicircular Bend fixture has been a range of 25mm with 0.25mm divisions
designed for use with the test methods above. The Dial Gauge For Flowmeter H-1344.2
H-1351 SCB head can be configured in two ways. Dial Gauge For Flowmeter, Metric H-1344.2M
Ship wt. 1lbs. (.45kg)
The first utilizes the upper and lower segments of
the breaking head. The lower segment is

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

 ASPHALT
219
Marshall Molds

H-1353A

H-1367, H-1367MM H-1361 H-1341A H-1337, H-1337MM

H-1341P H-1348
H-1361P H-1363 H-1331 H-1355

Marshall Compaction Mold, 6" or 150mm Marshall Compaction Mold, 4" or 100mm Storage Can for Marshall Samples
ASTM D6926, AASHTO T245 (Rotating Base) 4" dia. x 5.5" tall metal can with lid for storing Mar-
6"or 150mm compaction mold assembly for 4" or 100mm compaction mold assembly for shall mix samples.
preparing test specimens with the H-1366 and preparing test specimens with the H-1346D and Storage Can, 4" H-1331
H-1366R compactors. Can be used with rotating H-1356D rotating-base compactors. The mold is Ship wt. 2.8lb. (1.27kg)

or stationary base models. Mold is machined from machined from seamless tubing and plated. Mold Sample Ejector, Hand-Operated
seamless tubing and plated. Mold is comprised of is comprised of a base plate, mold cylinder and ASTM D5581, D6926, AASHTO T245
a base plate, mold cylinder and extension collar. extension collar. Base plate of mold is designed Designed for lab and field use to extract asphalt
to link with rotating base feature of compactors samples from either 4" or 6" compaction molds.
Compaction Mold, 6" H-1367
Compaction Mold, 150mm H-1367MM causing the mold to rotate during compaction. The ejection force is generated by means of a
Ship wt. 15lbs. (6.8kg) Forming mold is 4" (102mm) ID by 3" (76mm) high 3-ton (27.7kN) capacity hand-operated hydraulic
Marshall Compaction Mold, 4" (Rotating Base) and interchangeable with either end of the form- jack. The cast-aluminum ejector head assembly
ASTM D6926, AASHTO T245 ing mold. Forming mold is 4" (102mm) ID by 3" can be positioned at different heights through the
(76mm) high. use of quick release pins. This enables the opera-
4" compaction mold assembly for preparing test
specimens with the H-1364R rotating base com- Compaction Mold, 4" (Rotating Base) H-1337 tor to easily match the ejection travel to the height
Compaction Mold, 100mm (Rotating Base) H-1337MM of the mold being used. Maximum stroke distance
pactors. Mold is machined from seamless tubing Ship wt. 8lbs. (4kg)
and plated. Mold is comprised of a base plate, for this ejector is 7.5". Overall dimensions: 13"W x
Paper Disks 6"D x 27"H (330 x 152 x 686mm).
mold cylinder and extension collar.
ASTM D5581, D6926, AASHTO T245
Compaction Mold, 4" H-1361 Sample Ejector, Hand-Operated H-1353A
Ship wt. 9lbs. (4kg) Circular, smooth-edged 4" or 6" diameter disks, Ship wt. 46.2bs. (20.9kg)

Marshall Compaction Mold, 4" (Stationary Base) which can be placed in the bottom of compaction Sample Ejector, Motorized
ASTM D6926, AASHTO T245 molds prior to filling with asphalt mixture to facili- ASTM D5581, D6926, AASHTO T245
tate removal of the sample from the mold. Use with
4" compaction mold assembly for preparing test Similar in design and construction to the H-1353A
all molds.
specimens with H-1336D mechanical compactor series sample ejector, this model features the use
and H-1340 and H-1345 hand compactors. Mold is Paper Disks, 4" package of 1000 H-1341P of a 5-ton capacity motorized hydraulic pump and
Paper Disks, 6" package of 500 H-1361P ram assembly. The unit incorporates extended
machined from seamless tubing and plated. Mold Ship wt. 0.8lbs. (0.3kg)
is comprised of a base plate, mold cylinder and upright rods in order to accommodate both stan-
Mold Extractors
extension collar. Base plate and collar are inter- dard 4" or 6" asphalt compaction molds, as well
ASTM D5581, D6926, AASHTO T245
changeable with either end of the forming mold. as the taller gyratory compaction molds. Maximum
Forming mold is 4" (102mm) ID by 3" (76mm) high. Used with compression tester for removing 4" or stroke distance for this ejector is 9.25". Overall
6" specimens from compaction molds. dimensions excluding pump: 13"W x 6"D x 29"H
Compaction Mold, 4" (Stationary Base) H-1341A
Ship wt. 8lbs. (3.6kg) Mold Extractor, 4" H-1348 (330 x 152 x 737mm).
Mold Extractor, 6" H-1363
Ship wt. 3.6lbs. (1.6kg)
Sample Ejector, 120V 60Hz H-1355
Sample Ejector, 220V 50/60Hz H-1355.4F
Ship wt. 81lbs. (36.7kg)

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

 ASPHALT
224
Water Baths

H-1394

H-1380
H-1392, H-1390

• Auto-tuning is fast & effortless • Percent power limit protects components from
• Rapid cycling provides fast system response stress

• Dual, digital display simultaneously shows • Operator lockout guards against unwanted changes
set point and process temperature • All exposed parts are stainless steel. Front
• Ramp-to-set point handles critical panel is water and corrosion resistant.
temperature processes smoothly
• Set point range limiting protects process
and equipment

Humboldt water baths feature a microproces- Deluxe Water Bath Large Deluxe Water Bath
sor-based digital controller for precise tempera- ASTM D6927, D5581 and D4867 ASTM D6927, D5581 and D4867
ture control throughout their temperature range of Microprocessor-based control for precise tempera- Microprocessor-based control for precise tempera-
ambient to 180°F (82°C) at an accuracy of +/-0.1% tures throughout the range. Includes magnetic tures throughout the range. Includes magnetic
of input span. The dual digital display simultane- circulator, ensuring constant water temperature, circulator, ensuring constant water temperature,
ously shows the set point and the process tem- and, a stainless steel shelf, which stands 2" (51mm) and, a stainless steel shelf, which stands 2" (51mm)
perature at a glance. above the bottom of the unit for free circulation of above the bottom of the unit for free circulation of
Humboldt water baths are fully insulated to help water above and below test samples. Volume is water above and below test samples. Volume is: 17
maintain constant temperatures easily. Models 7.76 gallons (29.40L) and dimensions are: ID: 19.5" gallons (63.4L) and dimensions are 20" x 20" x 10"
H-1390 and H-1392 can accommodate (12) 4" W x 11.5" D x 8" H (495.3 x 292.1 x 203.2mm). deep (508 x 508 x 254mm).
diameter or (3) 6" diameter Marshall specimens at Water Bath, Deluxe 120V 60Hz H-1390 Water Bath, Large 120V 60Hz H-1394
a time. And the model H-1394 can accommodate Water Bath, Deluxe 220V 50/60Hz H-1390.4F Water Bath, Large 220V 50/60Hz H-1394.4F
(16) 4" and (9) 6" diameter Marshall specimens at Ship wt. 44lbs. (19.9kg) Ship wt. 75lbs. (34kg)
a time. All models include a stainless steel shelf, Water Bath Economy Water Bath
which supports specimens while allowing 2" of ASTM D6927, D5581 and D4867 Low-cost alternative water bath for heating spec-
free circulating water above and below specimens. Microprocessor-based control for precise tempera- imens holds eight standard 4" stability molds.
Models H-1390 and H-1394 also utilize a magnetic tures throughout the range. Includes a stainless Supporting shelf above the bottom allows water
stirring bar to induce water flow within the bath steel shelf, which stands 2" (51mm) above the bot- circulation around specimens. Automatic thermo-
and ensure a uniform temperature is maintained. tom of the unit for free circulation of water above static control with a range of 150° to 500°F (65° to
Model H-1392 does not have a magnetic stirring and below test samples. Volume is 7.76 gallons 160°C). ID 11.5 x 19.5 x 5.5" (293 x 497 x 140mm)
bar. All exposed areas are stainless steel and the (29.40L) and dimensions are: ID: 19.5" W x 11.5" D deep. H-1380.4F uses a step-down transformer,
front control panel is both water and corrosion x 8" H (495.3 x 292.1 x 203.2mm). which is included, for electric conversion.
resistant. Water Bath, Economy 120V 60Hz H-1380
Water Bath, 120V 60Hz H-1392
Water Bath, 220V 50/60Hz H-1392.4F Water Bath, Economy 220V 50/60Hz H-1380.4F
Ship wt. 43lbs. (19.5kg) Ship wt. 18lbs. (8.16kg

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

 ASPHALT
218
Marshall

H-1343
H-1345 H-1345.5

H-1345.6

H-1328A

H-1347
H-1340 H-1340G

Hand Compactor Set for 4" Molds 4" Hand Compaction Hammer w/ Finger Guard Hammer Guide, Adjustable
ASTM D6926 ASTM D6926 Hammer guide for hand compactor testing.
Compactor set that facilitates hand compaction of Compacts asphalt mixture in the compaction Hammer Guide, Adjustable H-1345.5
Ship wt. 2.6lbs. (1.1kg)
4" Marshall specimens. Set features ASTM-compli- mold. Hammer has finger guard at base of sliding
ant oak pedestal with hammer support rod, which weight. Flat circular face is 3.95" (100.3mm) dia.; Hammer Support Rod
holds hammer in perpendicular alignment to base hammer is 10 lb. (4.54kg.) sliding weight and has Hammer support rod for hand compactor testing.
during compaction. Also features a mold holder, a free fall of 18" (457mm). Additional mold and Mounts to pedestal.
which keeps the mold securely positioned during hammer assemblies are recommended for efficient Hammer Support Rod H-1345.6
Ship wt. 9.3lbs. (4.2kg)
compaction. Set includes: H-1340G compaction testing operations, allowing you to heat multiple
hammer; H-1347 pedestal with ASTM-compliant molds and hammers to speed testing. Marshall Mix Design and Testing Booklet
steel plate; H-1341A compaction mold; H-1343 4" Hammer w/Finger Guard H-1340G This booklet covers the Marshall mix design cri-
compaction mold holder; H-1345.6 hammer sup- Ship wt. 20lbs. (9.0kg) teria; equipment necessary to perform the tests;
port rod, and H-1345.5 adjustable guide. Addi- Mold Holder for Hand Compaction sample preparation and testing procedures; data
tional mold and hammer assemblies are recom- ASTM D6926 analysis, as well as moisture susceptibility testing
mended for efficient testing operations, allowing methods.
Holder mounts on compaction pedestal and cen-
you to preheat multiple molds and hammers to ters the compaction mold under the hammer for Marshall Mix Design Booklet H-1328A
Ship wt. 9lbs. (4.1kg)
speed testing. fast, repeatable operation. Mold holder keeps
4" Hand Compactor Set H-1345 mold, collar and base plate securely positioned
Ship wt. 165lbs. (74.8kg)
during compaction.
4" Hand Compaction Hammer Mold Holder for Hand Compaction H-1343
AASHTO T245 Ship wt. 4.8lbs. (2.1kg)

Hammer used to compact asphalt mixture in the Pedestal for 4" Hand Compactor
compaction mold. Flat circular face is 3.875" ASTM D6926
(98mm) dia.; hammer is 10 lb. (4.54kg.), sliding This oak pedestal is necessary for stabilizing molds
weight and has a free fall of 18" (457mm). Additional during compaction. The ASTM-compliant oak
mold and hammer assemblies are recommended compaction pedestal is 8" x 8" x 18" (203 x 203 x
for efficient testing operations, allowing you to 457mm), capped with 12" x 12" x 1" (305 x 305 x
preheat multiple molds and hammers to speed 25mm) steel plate. The pedestal mounts to a con-
testing. crete slab with four angle brackets located at the
4" Hand Compaction Hammer H-1340 bottom of pedestal.
Ship wt. 18.5lbs. (8.3kg) Ovens and hotplates can be used to facil-
Pedestal for 4" Hand Compactor H-1347
Ship wt. 82lbs. (37.1kg) itate the heating of molds and hammers
for better testing control. See page 251
for ovens and page 256 for hotplates.

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

#
#&50/
 CONCRETE
143
Air Indicators, Unit Weight

H-2796A

ASTM Unit
Weight Measures

H-2795P

Non-ASTM Unit
H-3650 Weight Measures

Roll-A-Meter Air Indicator ASTM Unit Weight Measures

ASTM C173, AASHTO T196
Capacity Inside Dia. Inside Ht. Ship Wt.
This lightweight aluminum Roll-A-Meter is used to determine the air content of Model
cu. ft. (liter) in. (mm) in. (mm) lbs. (kg)
concrete mixes, and is recommended for concrete containing lightweight aggre-
gate, air-cooled slag or highly porous aggregate. The meter's fast acting one-piece, 1/10 (2.8) 6 (152) 6.1 (155) 6.5 (2.7) H-3660.1
self-locking stainless steel clamps assure a watertight seal between the top section 1/4 (7.1) 8 (203) 8.8 (224) 9.4 (4.9) H-3664.1
and bowl. A see-through window in the neck has easy to read engraved scale grad- 1/3 (9.3) 8 (203) 11.5 (292) 17 (7.7) H-3663.1
uated from 0 to 9% with .25% sub-graduations. A durable plastic carrying case with
1/2 (14.1) 10 (254) 11 (279) 20 (7.2) H-3661.1
a tough die cut closed cell hard foam insert protects the meter and its accessories.
Kit includes: Meter, carrying case, tamping rod, baffle funnel, strike-off bar, calibra- 1 (28.3) 14 (356) 11.2 (155) 22 (13.6) H-3662.1
tion measuring vessel, syringe, 16 oz. measuring cup, spanner wrench and manual.
ASTM Unit Weight Measures
Roll-A-Meter Air Indicator H-2796A ASTM C29, C138, C192, AASHTO T19, T121, T158
Ship wt. 29.8lbs. (11.4kg)
Machined aluminum, cylindrical unit weight measures with
Volumetair Air Meter
handles for determining unit weight of fine, coarse or mixed
ASTM C173, AASHTO T196
aggregates. Water-tight with true and even top and bottom.
The volumetair is used for the rolling method of measuring entrained air in any Measures retain form after repeated use.
concrete. This ultra lightweight and easy-to-use instrument is supplied complete
ASTM Unit Weight Measures see chart
with the meter, funnel, syringe, tamper, calibration cup, mallet, strike-off bar and Ship wt. see chart
plastic carrying case. The plastic materials used in the construction of this unit not
Non-ASTM Unit Weight Measures
only make it lightweight; but also allow the user to use water for clean-up and small
amounts of muriatic acid for periodic cleaning. The sight tube has a range of 0 to 9% Capacity Inside Dia. Inside Ht. Ship Wt.
Model
and the base volume is 134 cu. in. (2200ml). cu. ft. (liter) in. (mm) in. (mm) lbs. (kg)

Volumetair Air Meter H-2795P 1/10 (2.8) 6 (152) 6.1 (155) 6.5 (3.2) H-3660
Ship wt. 19lbs. (6.8kg)
1/4 (7.1) 8 (203) 8.8 (224) 15 (6.8) H-3664
Tamping (Puddling) Rod
1/3 (9.3) 8 (203) 11.5 (292) 15.8 (8.7) H-3663
Round, straight steel rod for use with concrete cylinder molds, slump cones and
1/2 (14.1) 10 (254) 11 (279) 20 (10) H-3661
unit weight measures. Rod measures .625" (16mm) dia. x 24" (610mm) long.
Both ends are rounded to hemispherical tip. Plated for rust resistance. 1 (28.3) 14 (356) 11.2 (155) 33 (15) H-3662
Tamping (Puddling) Rod H-3650
Ship wt. 3lbs. (0.9kg) Non-ASTM Unit Weight Measures
Strike-Off Plates Heavy-gauge, seam-welded, water-tight, steel unit weight
ASTM C29, C138, C192, AASHTO T19, Size Ship measures with bail handles. Can be used for concrete or
T121, T158 sq. in. Model Wt. aggregate. Do not meet ASTM specifications.
(mm sq.) lbs. (kg)
Clear .625" (15.8mm) thick, acrylic plates Non-ASTM Unit Weight Measures see chart
8 (203) H-3669.1P 2.3 (0.9) Ship wt. see chart
used to strike off surface of unit weight
measure samples. Use a plate that is 2" 10 (254) H-3669.4P 4 (1.0)
(50.8mm) larger than the diameter of the 12 (305) H-3669.2P 5.1 (2.3) See Pages 297 to 298
unit weight measure. for Portable Scales for
16 (406) H-3669.3P 8 (3.6) use in Unit Weight measure
Strike-Off Plates see chart
Ship wt. see chart
NOTE: Use 2" larger plate than the
diameter of the unit weight measure.

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

 &RQFUHWH(TXLSPHQW

0HFKDQLFDO&RQFUHWH%HDP7HVWLQJ0DFKLQH&2
$670&
)RUGHWHUPLQLQJWKHIOH[XUDOVWUHQJWKRIFRQFUHWHEHDPE\XVLQJDVLPSOHEHDPZLWKWKLUGSRLQWORDGLQJ
N1FDSPHFKDQLFDOMDFNSURYLQJULQJUHDGLQJVDPSOHVL]H[[FPZHOGHGVWHHOFRQVWUXFWLRQ

'LPHQVLRQO[Z[K  [[FP


*URVV:HLJKW  NJ


+\GUDXOLF&RQFUHWH%HDP7HVWLQJ0DFKLQH&2
$670&
)RUGHWHUPLQLQJWKHIOH[XUDOVWUHQJWKRIFRQFUHWHEHDPE\XVLQJDVLPSOHEHDPZLWKWKLUGSRLQWORDGLQJ
N1FDSKLGUDXOLFKDQGSXPSPDQRPHWHUUHDGLQJVDPSOHVL]H[[FPZHOGHGVWHHOFRQVWUXFWLRQ

'LPHQVLRQO[Z[K  [[FP


*URVV:HLJKW  NJ


&RPSDFWLQJ)DFWRU$SSDUDWXV&2
%6
)RUGHWHUPLQLQJZRUNDELOLW\RIFRPSDFWLQJIDFWRUFRQFUHWHRIORZPHGLXPDQGKLJKZRUNDELOLW\:HOGHG
VWHHOIUDPHFRQVWUXFWLRQWZRFRQLFDOPROGRQHF\OLQGHUPROG

'LPHQVLRQO[Z[K  [[FP


*URVV:HLJKW  NJ

6OXPS7HVW6HW&2
$670& $$6+727
)RUGHWHUPLQLQJVOXPSZRUNDELOLW\RIFRQFUHWHERWKLQWKHODERUDWRU\DQGLQWKHILHOG

7\SH 3DUWV1DPH 6SHFLILFDWLRQ 4W\

&2 6OXPS&RQH +HDY\JDXJHVKHHWVWHHOWRSGLDERWWRPGLD
KHLJKW 3F
&2 ,QVSHFWLRQ6FDOH 0DFKLQHVWHHOFPVOXPSPHDVXUHPHQWFP
LQFUHPHQW 3F
&2 %DVH3ODWH 6WHHOVKHHWFDUU\QJKDQGOH[[PP 3F
*( 6FRRS &DVWDOXPXQLXP 3F
*( 7URZHO 3RLQWHGW\SH 3F
*( %UXVK 6WHHOZLUH 3F
*( 7DPSLQJ5RG 0DFKLQHVWHHOJDOYDQL]HGPPGLDPPOHQJWK 3F

'LPHQVLRQO[Z[K  [[FP

*URVV:HLJKW  NJ

™™™Ǥ—Ž–‹„‹ƒǤ…‘ȈŠǤΪ͸ʹʹͳͷ͵ͳͶͳͳʹͷȁͷ͵ͳͶͳͲ͸͵Ȉ•ƒŽ‡•̷—Ž–‹„‹ƒǤ…‘Ǥ‹† 
 MIXING CONCRETE CONCRETE MOULDS
in THE LABORATORY
Product Code
Product Code UTC-0810 Cube Mould 100 mm, Cast Iron
UTC-0812 Cube Mould 100 mm, Two Gang Plastic
UTC-0760 Concrete Mixer Drum Type, 220-240 V 50-60 Hz UTC-0815 Cube Mould 150 mm, Cast Iron
UTC-0820 Cube Mould 150 mm, Plastic
UTC-0821 Cube Mould 150 mm, High Quality Plastic
The UTC-0760 mixer is used for efficient mixing of concrete, UTC-0825 Cube Mould 200 mm, Cast Iron
plaster and mosaic. 125 lt. mixing volume and 2-3 m3/h UTC-0408 Tamping Rod Ø 16x600 mm
lightweight mixer is equipped with rubber wheels which provide UTGH-1695 Rubber Mallet
high portability.
Standards
Electric and diesel power models are available.
EN 12390-1

Cast iron and hard plastic moulds are manufactured in

accordance with dimensions and tolerances stated in the relevant
standard. Four part body and attached to the base with a robust
clamp, the cast iron moulds are designed to be durable, corrosion
resistant and easy to clean.

UTC-0820 plastic moulds manufactured from robust plastic are

one piece and easy for field use, the specimens are ejected from
the moulds by compressed air.

UTC-0825

Technical Specifications
UTC-0815 UTC-0810
Drum Volume 135 lt. UTC-0820

Mixing Volume 125 lt.

3
Mixing Capacity 2-3 m /h

Dimensions 670x1200x900 mm
Weight (approx.) 40 kg
Power 750 W (Electric Powered Model)
3.5 HP (Diesel Engine Powered Model)

UTC-0812

Product Code Dimensions Weight (approx.)

UTC- 0810 270x270x120 mm 9 kg
UTC- 0812 260x120x120 mm 2 kg
UTC- 0815 300x210x160 mm 17 kg
UTC- 0820 220x220x180 mm 2 kg
UTC- 0821 220x220x180 mm 2 kg
UTC- 0825 330x270x220 mm 20 kg

186
 &RQFUHWH(TXLSPHQW

&RQFUHWH&\OLQGHU0ROG&2
&DVWLURQIRUIRUPLQJFRQFUHWHF\OLQGHUVDPSOH

7\SH 3DUWV1DPH 6SHFLILFDWLRQ

&2 &RQFUHWH&\OLQGHU0ROG FPGLD[FPKHLJKW
&2 &RQFUHWH&\OLQGHU0ROG FPGLD[FPKHLJKW

'LPHQVLRQO[Z[K  [[FP[[FP


*URVV:HLJKW  NJNJ


&RQFUHWH%HDP0ROG&2$
&DVWLURQIRUIRUPLQJFRQFUHWHEHDPVDPSOH

7\SH 3DUWV1DPH 6SHFLILFDWLRQ

&2$ &RQFUHWH%HDP0ROG [[FP
&2$ &RQFUHWH%HDP0ROG [[FP

'LPHQVLRQO[Z[K  [[FP[[FP


*URVV:HLJKW  NJNJ


&RQFUHWH&XEH0ROG&2
&DVWLURQIRUIRUPLQJFRQFUHWHFXEHVDPSOH

7\SH 3DUWV1DPH 6SHFLILFDWLRQ

&2 &RQFUHWH&XEH0ROG [[FP
&2 &RQFUHWH&XEH0ROG [[FP

'LPHQVLRQO[Z[K  [[FP[[FP


*URVV:HLJKW  NJNJ


&RPSUHVVLRQ0DFKLQH&2
$670&
)RUGHWHUPLQLQJFRPSUHVVLYHVWUHQJWKRIFRQFUHWHFXEH[[FPRUFRQFUHWHF\OLQGHUFPGLD[
FPKHLJKW

3DUWV1DPH 6SHFLILFDWLRQ
)UDPH +HDY\GXW\ZHOGHGVWHHOFRQVWUXFWLRQ
FPSURILOHVWHHOFROXPQV
WKLFNERWWRPDQGXSSHUSODWH

+\GUDXOLF6\VWHP &DVWLURQF\OLQGHU+DUGFKURPHGSLVWRQPPGLDPHWHU
IRUN1&DS 0D[LPXPZRUNLQJSUHVVXUHN3D
2YHUDOOGLPHQVLRQPPGLD[PPKHLJKW
6LQJOHDFWLRQJUDYLW\UHWXUQ

+\GUDXOLF6\VWHP &DVWLURQF\OLQGHU+DUGFKURPHGSLVWRQPPGLDPHWHU
IRUN1&DS 0D[LPXPZRUNLQJSUHVVXUHN3D
2YHUDOOGLPHQVLRQPPGLD[PPKHLJKW
6LQJOHDFWLRQJUDYLW\UHWXUQ

+\GUDXOLF6\VWHP 0LOG6WHHO&\OLQGHU+DUGFKURPHGSLVWRQPPGLDPHWHU
IRUN1&DS 0D[LPXPZRUNLQJSUHVVXUHN3D
RYHUDOOGLPHQVLRQPPGLD[PPKHLJKW
6LQJOHDFWLRQJUDYLW\UHWXUQ

+\GUDXOLF3XPS (OHFWULF9$&+=:DWW3KDVH6LQJOHDFWLRQ
YDULDEOHVSHHG
POUHVHUYRLUFDSDFLW\
0D[LPXPZRUNLQJSUHVVXUHN3D
6LQJOHDFWLRQJUDYLW\UHWXUQ

™™™Ǥ—Ž–‹„‹ƒǤ…‘ȈŠǤΪ͸ʹʹͳͷ͵ͳͶͳͳʹͷȁͷ͵ͳͶͳͲ͸͵Ȉ•ƒŽ‡•̷—Ž–‹„‹ƒǤ…‘Ǥ‹† 
 CONCRETE
MATERIAL TESTING EQUIPMENT
Hardened Concrete Testing
CONCRETE MOULDS

Product Code

UTC-0842 Cylinder Mould Ø 100x200 mm, Steel

UTC-0843 Cylinder Mould Ø 100x200 mm, Plastic Body with Steel Plate
UTC-0845 Cylinder Mould Ø 150x300 mm, Steel
UTC-0846 Cylinder Mould Ø 150x300 mm, Plastic Body with Steel Plate
UTC-0850 Cylinder Mould Ø 160x320 mm, Steel
UTC-0851 Cylinder Mould Ø 160x320 mm, Plastic Body with Steel Plate

Standards

EN 12390-1; ASTM C192, C470

Hard plastic and steel cylinder moulds are manufactured in

accordance with dimensions and tolerances stated in the related
standards. Two part and clamp attached base plate cast iron,
plastic and steel moulds are designed to be durable, corrosion
resistant and easy to clean.

Product Code Dimensions Weight (approx.)

UTC-0842 160x160x210 mm 6 kg
UTC-0843 160x160x210 mm 1 kg UTC-0843 UTC-0845
UTC-0845 250x250x310 mm 9 kg
UTC-0846 200x200x310 mm 2 kg
UTC-0850 300x300x330 mm 11 kg
UTC-0851 190x190x310 mm 3 kg

01
 &RQFUHWH(TXLSPHQW

&RQFUHWH&\OLQGHU0ROG&2
&DVWLURQIRUIRUPLQJFRQFUHWHF\OLQGHUVDPSOH

7\SH 3DUWV1DPH 6SHFLILFDWLRQ

&2 &RQFUHWH&\OLQGHU0ROG FPGLD[FPKHLJKW
&2 &RQFUHWH&\OLQGHU0ROG FPGLD[FPKHLJKW

'LPHQVLRQO[Z[K  [[FP[[FP


*URVV:HLJKW  NJNJ


&RQFUHWH%HDP0ROG&2$
&DVWLURQIRUIRUPLQJFRQFUHWHEHDPVDPSOH

7\SH 3DUWV1DPH 6SHFLILFDWLRQ

&2$ &RQFUHWH%HDP0ROG [[FP
&2$ &RQFUHWH%HDP0ROG [[FP

'LPHQVLRQO[Z[K  [[FP[[FP


*URVV:HLJKW  NJNJ


&RQFUHWH&XEH0ROG&2
&DVWLURQIRUIRUPLQJFRQFUHWHFXEHVDPSOH

7\SH 3DUWV1DPH 6SHFLILFDWLRQ

&2 &RQFUHWH&XEH0ROG [[FP
&2 &RQFUHWH&XEH0ROG [[FP

'LPHQVLRQO[Z[K  [[FP[[FP


*URVV:HLJKW  NJNJ


&RPSUHVVLRQ0DFKLQH&2
$670&
)RUGHWHUPLQLQJFRPSUHVVLYHVWUHQJWKRIFRQFUHWHFXEH[[FPRUFRQFUHWHF\OLQGHUFPGLD[
FPKHLJKW

3DUWV1DPH 6SHFLILFDWLRQ
)UDPH +HDY\GXW\ZHOGHGVWHHOFRQVWUXFWLRQ
FPSURILOHVWHHOFROXPQV
WKLFNERWWRPDQGXSSHUSODWH

+\GUDXOLF6\VWHP &DVWLURQF\OLQGHU+DUGFKURPHGSLVWRQPPGLDPHWHU
IRUN1&DS 0D[LPXPZRUNLQJSUHVVXUHN3D
2YHUDOOGLPHQVLRQPPGLD[PPKHLJKW
6LQJOHDFWLRQJUDYLW\UHWXUQ

+\GUDXOLF6\VWHP &DVWLURQF\OLQGHU+DUGFKURPHGSLVWRQPPGLDPHWHU
IRUN1&DS 0D[LPXPZRUNLQJSUHVVXUHN3D
2YHUDOOGLPHQVLRQPPGLD[PPKHLJKW
6LQJOHDFWLRQJUDYLW\UHWXUQ

+\GUDXOLF6\VWHP 0LOG6WHHO&\OLQGHU+DUGFKURPHGSLVWRQPPGLDPHWHU
IRUN1&DS 0D[LPXPZRUNLQJSUHVVXUHN3D
RYHUDOOGLPHQVLRQPPGLD[PPKHLJKW
6LQJOHDFWLRQJUDYLW\UHWXUQ

+\GUDXOLF3XPS (OHFWULF9$&+=:DWW3KDVH6LQJOHDFWLRQ
YDULDEOHVSHHG
POUHVHUYRLUFDSDFLW\
0D[LPXPZRUNLQJSUHVVXUHN3D
6LQJOHDFWLRQJUDYLW\UHWXUQ

™™™Ǥ—Ž–‹„‹ƒǤ…‘ȈŠǤΪ͸ʹʹͳͷ͵ͳͶͳͳʹͷȁͷ͵ͳͶͳͲ͸͵Ȉ•ƒŽ‡•̷—Ž–‹„‹ƒǤ…‘Ǥ‹† 
 CONCRETE
172
Rebound Test Hammers

H-2987H

H-2975

H-2971STN
H-2976
H-2971U H-2975NR

Concrete Rebound Hammers of the test is 1.6 ft-lbs (2.207 Nm). The (type N) The instrument measuring range is 1,450 to
ASTM C805, D5873; BS 1881: Part 202; Schmidt hammer is pressed against the concrete 10,150 psi (10-70 N/mm2) using 2.207 Nm impact
ISOIDIS8045; ENV 206; IGJ/T 23-2001 structure and the rebound values are displayed on energy. Accuracy is ±0.2R with 0.5R reproducibil-
Concrete rebound hammers are used to determine a mechanical sliding scale. These values can then ity. Rebound vs. strength correlation curves for 7
in-place strength of concrete. All these models be correlated to compressive strength by using the and 28 day strengths are installed in memory, or
accurately measure compressive strength, which conversion table chart affixed to the hammer. The the users own data may be installed via keyboard
directly determines the load-bearing capacity and original Schmidt hammer is known for its durability entry. The Internal memory holds 5000 measure-
durability of concrete structures. All models also and accuracy. ments, each with date and time. Data can be trans-
include a grinding stone, carrying case and instruc- Schmidt Hammer, Type N H-2975 ferred via the RS-232C interface to a PC in Micro-
tion booklet with conversion charts. Schmidt Hammer, Type N (N/mm2) H-2975M soft Excel using the included cable and software.
Humboldt Rebound Hammer Ship wt. 4.7lbs. (2.1kg) Direct printing is possible.
Humboldt's concrete rebound hammer provides a Schmidt Hammer, Type L The Digi-Schmidt consists of the test hammer,
reliable, yet economical, alternative to the original The H-2975L hammer is designed for testing thin- control and display unit, connecting cable, PC
schmidt hammer. It is designed for testing concrete walled structural components with a thickness of cable, carrying strap, rubbing stone, instruction
4" (100mm) or more in thickness with a maximum less than 4" (100mm) or rock cores. This hammer manual and a plastic carrying case.
particle size less than or equal to 1.25" (32mm), features an impact of 0.74 Nm, which is 1/3 less Digi-Schmidt Concrete Test Hammer H-2976
providing a quick and simple test for obtaining an energy than type N hammers and uses a N/mm2 Ship wt. 12lbs. (5.4 kg)

immediate indication of concrete strength in var- scale. Silver Schmidt Hammer

ious parts of a structure. The Humboldt rebound Schmidt Hammer, Type L (N/mm2) H-2975LM The Proceq Silver Schmidt test hammer has been
hammer covers a compressive strength range of Ship wt. 4.8lbs. (2.2kg)
redesigned to provide unmatched accuracy,
1,450 to 9,000 psi (10 to 62 MPa). To operate, the Digi-Schmidt Concrete Test Hammer repeatability and easy, intuitive operation. The
rebound hammer is pressed against the concrete The Digi-Schmidt concrete Test hammer couples Silver Schmidt features quicker and more accurate
structure and the rebound values are displayed on the original Schmidt hammer with rebound mea- testing while addressing the previous insufficien-
a mechanical sliding scale. These values can then suring sensors and microprocessor technology to cies of the traditional hammers. With the Silver
be correlated to compressive strength by using provide an instrument designed for applications Schmidt impact direction no longer has an impact
the conversion table chart affixed to the hammer. requiring numerous measurements. The method is on values; values are not affected by internal fric-
It includes a grinding stone, a cloth carrying case, rapid, reproducible, and has resolution previously tion of the hammer operation, and, loss of accu-
instruction booklet and conversion charts. unattainable by manual models. racy because of seal problems is not an issue.
Humboldt Test Hammer, Type N H-2987H The hammer is connected to a control and display In use, the Silver Schmidt eliminates cocking the
Ship wt. 4lbs. (1.8kg)
unit by means of a connecting cable. Strength val- hammer for each blow and recording the results,
Schmidt Hammer, Type N ues are shown digitally as they are taken and also the Silver Schmidt allows you to do all your test
The original Schmidt® hammer, type N, is designed displayed as groups of bars on the 128 x 128 pixel blows in rapid succession, while it records the
for non-destructive testing of concrete items 4" graphic LCD. Mean value and standard deviation results. These results can then be reviewed. Intu-
(100mm) or more in thickness, or concrete with a for a preset number of measurements are com- itive User Interface is language independent
maximum particle size less than or equal to 1.25" puted and displayed. Via the menu display, the through the use of easy-to-understand icons. The
(32mm). It is designed for testing concrete within a user can select: hammer impact direction (up, interface menu structure is similar to a mobile
compressive strength range of 1,450 to 10,152 psi down, horizontal, etc.); desired engineering units phone’s. Practically every command can be acti-
(10 to 70 N/mm2) and impact energy (psi, MPa, kg/cm2, or N/mm2), and indicate the vated either directly or via no more than 2 consec-
specimen size and type (cylinders, cubes, etc.) for utive steps.
the strength data to be predicted.

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

 CONCRETE
172
Rebound Test Hammers

H-2987H

H-2975

H-2971STN
H-2976
H-2971U H-2975NR

Concrete Rebound Hammers of the test is 1.6 ft-lbs (2.207 Nm). The (type N) The instrument measuring range is 1,450 to
ASTM C805, D5873; BS 1881: Part 202; Schmidt hammer is pressed against the concrete 10,150 psi (10-70 N/mm2) using 2.207 Nm impact
ISOIDIS8045; ENV 206; IGJ/T 23-2001 structure and the rebound values are displayed on energy. Accuracy is ±0.2R with 0.5R reproducibil-
Concrete rebound hammers are used to determine a mechanical sliding scale. These values can then ity. Rebound vs. strength correlation curves for 7
in-place strength of concrete. All these models be correlated to compressive strength by using the and 28 day strengths are installed in memory, or
accurately measure compressive strength, which conversion table chart affixed to the hammer. The the users own data may be installed via keyboard
directly determines the load-bearing capacity and original Schmidt hammer is known for its durability entry. The Internal memory holds 5000 measure-
durability of concrete structures. All models also and accuracy. ments, each with date and time. Data can be trans-
include a grinding stone, carrying case and instruc- Schmidt Hammer, Type N H-2975 ferred via the RS-232C interface to a PC in Micro-
tion booklet with conversion charts. Schmidt Hammer, Type N (N/mm2) H-2975M soft Excel using the included cable and software.
Humboldt Rebound Hammer Ship wt. 4.7lbs. (2.1kg) Direct printing is possible.
Humboldt's concrete rebound hammer provides a Schmidt Hammer, Type L The Digi-Schmidt consists of the test hammer,
reliable, yet economical, alternative to the original The H-2975L hammer is designed for testing thin- control and display unit, connecting cable, PC
schmidt hammer. It is designed for testing concrete walled structural components with a thickness of cable, carrying strap, rubbing stone, instruction
4" (100mm) or more in thickness with a maximum less than 4" (100mm) or rock cores. This hammer manual and a plastic carrying case.
particle size less than or equal to 1.25" (32mm), features an impact of 0.74 Nm, which is 1/3 less Digi-Schmidt Concrete Test Hammer H-2976
providing a quick and simple test for obtaining an energy than type N hammers and uses a N/mm2 Ship wt. 12lbs. (5.4 kg)

immediate indication of concrete strength in var- scale. Silver Schmidt Hammer

ious parts of a structure. The Humboldt rebound Schmidt Hammer, Type L (N/mm2) H-2975LM The Proceq Silver Schmidt test hammer has been
hammer covers a compressive strength range of Ship wt. 4.8lbs. (2.2kg)
redesigned to provide unmatched accuracy,
1,450 to 9,000 psi (10 to 62 MPa). To operate, the Digi-Schmidt Concrete Test Hammer repeatability and easy, intuitive operation. The
rebound hammer is pressed against the concrete The Digi-Schmidt concrete Test hammer couples Silver Schmidt features quicker and more accurate
structure and the rebound values are displayed on the original Schmidt hammer with rebound mea- testing while addressing the previous insufficien-
a mechanical sliding scale. These values can then suring sensors and microprocessor technology to cies of the traditional hammers. With the Silver
be correlated to compressive strength by using provide an instrument designed for applications Schmidt impact direction no longer has an impact
the conversion table chart affixed to the hammer. requiring numerous measurements. The method is on values; values are not affected by internal fric-
It includes a grinding stone, a cloth carrying case, rapid, reproducible, and has resolution previously tion of the hammer operation, and, loss of accu-
instruction booklet and conversion charts. unattainable by manual models. racy because of seal problems is not an issue.
Humboldt Test Hammer, Type N H-2987H The hammer is connected to a control and display In use, the Silver Schmidt eliminates cocking the
Ship wt. 4lbs. (1.8kg)
unit by means of a connecting cable. Strength val- hammer for each blow and recording the results,
Schmidt Hammer, Type N ues are shown digitally as they are taken and also the Silver Schmidt allows you to do all your test
The original Schmidt® hammer, type N, is designed displayed as groups of bars on the 128 x 128 pixel blows in rapid succession, while it records the
for non-destructive testing of concrete items 4" graphic LCD. Mean value and standard deviation results. These results can then be reviewed. Intu-
(100mm) or more in thickness, or concrete with a for a preset number of measurements are com- itive User Interface is language independent
maximum particle size less than or equal to 1.25" puted and displayed. Via the menu display, the through the use of easy-to-understand icons. The
(32mm). It is designed for testing concrete within a user can select: hammer impact direction (up, interface menu structure is similar to a mobile
compressive strength range of 1,450 to 10,152 psi down, horizontal, etc.); desired engineering units phone’s. Practically every command can be acti-
(10 to 70 N/mm2) and impact energy (psi, MPa, kg/cm2, or N/mm2), and indicate the vated either directly or via no more than 2 consec-
specimen size and type (cylinders, cubes, etc.) for utive steps.
the strength data to be predicted.

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

 CONCRETE
161
Cylinder Capping
H-2951 Kit

H-2945
(see pg. 105)

H-2953

H-2959

H-2958

H-2952
(see pg. 106)

Cylinder Capping Kit Compound Melting Pots

ASTM C31, C39, C192, C617; AASHTO T22, T23, ASTM C617; AASHTO T231
T126, T231 Designed for melting capping compound, paraf-
Kit provides the basic components for cylinder fin and similar materials; compound melting pots
capping and includes: (1) H-2945 cylinder carrier, feature an adjustable thermostat to deliver close
(1) H-2952 vertical cylinder capper, (1) H-2953 temperature control automatically from 100° to
compound melting pot, (1) H-2959 capping com- 320°F (37.8 to 160°C). Includes cover, pilot light, 6'
pound and (1) H-2958 ladle. See individual compo- (1.8m) 3-conductor grounded cord set. Inner pot is
nents for descriptions. cast aluminum encased in a metal jacket with fiber-
Cylinder Capping Kit, 120V 60Hz H-2951 glass and air insulation, keeping heat loss to a min-
Cylinder Capping Kit, 220V 50/60Hz H-2951.4F imum. Replaceable heating elements are securely
Ship wt. 130lbs. (58.7kg) clamped to the bottom and sides of the crucible
for even heat distribution.
Capping Compound, Flake-style
ASTM C307, C321, C386, C579, C617, D71 Capacity Electric Amps Ship wt. Model
50 lb bag of Sauereisen No. 600 sulfur-based, 4 qt. 120V 60Hz 6 16.8 lbs H-2953
flake-form capping compound melts and sets
within minutes. Silica-filled compound has 150 3.8L 220V 50/60Hz 3 18 kg H-2953.4F
psi bond strength, 9000 psi compressive strength
8 qt. 120V 60Hz 10 20 lbs H-2954
and 605 psi tensile strength. Compound pours
between 265 and 290°F (129 to 143°C). Over- 7.6L 220V 50/60Hz 5 29 lbs H-2954.4F
heated material‘s viscosity is reinstated by decreas-
ing temperature to 290°F. 12 qt. 120V 60Hz 11 31 lbs H-2955

Capping Compound, Flake-style H-2959 11.4L 220V 50/60Hz 5.5 31.1 lbs H-2955.4F
Ship wt. 52lbs. (24kg)
20 qt. 120V 60Hz 12 48 lbs H-2948
Capping ladle
Stainless steel ladle with 4" (102mm) dia. bowl 19L 220V 50/60Hz 6 43.6 lbs H-2948.4F
is used in transferring capping compound from
melting pot to capping fixture. 28 qt. 120V 60Hz 15 48 lbs H-2949

Capping Ladle H-2958 26.5L 220V 50/60Hz 7.5 48 lbs H-2949.4F

Ship wt. 1.3lb (0.6kg)

Compound Melting Pots see chart above

Ship wt. see chart above

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

 CONCRETE
MATERIAL TESTING EQUIPMENT
Compression and Flexural Testing Machines
HIGH CAPACITY SEMI-AUTOMATIC COMPRESSION TESTING MACHINES

Product Code

UTC-4221 2000 kN Semi-Automatic Compression Testing Machine EN, 220-240 V 50-60 Hz

UTC-6221 2000 kN Semi-Automatic Compression Testing Machine ASTM, 220-240 V 50-60 Hz
UTC-6221/110 2000 kN Semi-Automatic Compression Testing Machine ASTM, 110 V 60 Hz
UTC-4321 3000 kN Semi-Automatic Compression Testing Machine EN, 220-240 V 50-60 Hz
UTC-6321 3000 kN Semi-Automatic Compression Testing Machine ASTM, 220-240 V 50-60 Hz
UTC-6321/110 3000 kN Semi-Automatic Compression Testing Machine ASTM, 110 V 60 Hz
UTC-0210 High Precision Pressure Transducer and Electronic

Standards

ASTM C39; AASHTO T22; ISO EN 7500, EN 12390-4

UTC - 4321 UTC - 4221

The UTEST Semi-Automatic (Motorized) range of 2000 kN and 3000 kN capacity compression testing machines have been designed for re-
liable and consistent testing of a wide range of specimens. These compression testers are manufactured as a result of continuous research
studies to upgrade the machines with the latest technologies to conform with the latest standards EN 12390-3, 12390-4, BS 1881 and ASTM
C39 in terms of its technical properties taking into account the client requirements. These machines also meet the requirements of CE
norms with respect to the health and safety of the operator. And their user-friendly design enable an inexperienced operator to perform the
test.

Exceeding of the ASTM C-39 standard provisions (starts with the 10% of the machine capacity), the UTC-4221, UTC-4321, UTC-6221 and
UTC-6321 are supplied in Class 1 starting from 50 kN. This unique performance enables the machines to be used for a considerable number
of applications including:

• Early age compression strength tests

• Flexural tests by using proper accessories
• Mortar (Cement) compression tests by using proper accessories
• Core with low diameter compression tests

01
 CONCRETE
MATERIAL TESTING EQUIPMENT
Compression and Flexural Testing Machines
HIGH CAPACITY SEMI-AUTOMATIC COMPRESSION TESTING MACHINES

The compression machines consist of a heavy duty welded frame, hydraulic power pack with data acquisition system LPI.

UTC-4221 and UTC-4321 Testing Machine is supplied complete with;

• Ø 205x90 mm, Ø 205x50 mm and Ø 205x30 mm distance pieces

• UTC-4513 Upper Platen (with ball seating assembly) Ø300 mm, Lower Platen Ø300 mm.

UTC-4510, UTC-4511, UTC-4512 and UTC-4515 upper and lower platen sets can also be used with UTC-4221 and UTC-4321
testing machines.

UTC-6221 and UTC-6321 Compression Testing Machines are supplied complete with;

• Ø 165x90 mm, Ø 165x50 mm and 2 pcs Ø 165x30 mm distance pieces

• UTC-4511 Upper Platen (with ball seating assembly) Ø165 mm, Lower Platen Ø165 mm.

UTC-4510, UTC-4512 and UTC-4515 upper and lower platen sets can also be used with UTC-6221 and UTC-6321
Compression Testing Machines.

Safety Features

• Maximum pressure valves to avoid machine overloading

• Piston travel limit switch

Model UTC-4221 UTC-4321 UTC-6221 UTC-6321

Capacity 2000 kN 3000 kN 2000 kN 3000 kN
Standard EN EN ASTM ASTM
The roughness value for texture of ≤ 3.2µm ≤ 3.2µm ≤ 3.2µm ≤ 3.2µm
loading and auxiliary platens
Lower platens dimensions Ø300 mm Ø300 mm Ø165 mm Ø165 mm
Upper platens dimensions Ø300 mm Ø300 mm Ø165 mm Ø165 mm
Maximum vertical clearance 340 mm 340 mm 370 mm 370 mm
between platens
Piston diameter 250 mm 300 mm 250 mm 300 mm
Maximum piston movement 50 mm 50 mm 50 mm 50 mm
Horizontal clearance 360 mm 425 mm 360 mm 425 mm
Power 550 W 550 W 550 W 550 W
Oil capacity 20 L 20 L 20 L 20 L
Maximum working pressure 410 Bar 410 Bar 410 Bar 410 Bar
Dimensions (wxlxh) 740x500x970 mm 805x540x1050 mm 740x500x970 mm 805x540x1050 mm
Weight 780 kg 1080 kg 760 kg 1060 kg

Maximum horizontal clearance for placing sample is limited with the border of the platens. Sample must be placed such that its ends will
not overflow from the ends of platens and it must be centered perfectly.

The suitable vertical clearance for specimen can be adjusted with distance pieces ( see next page ).

110 V, 50 Hz models are available upon request. The only difference is the input voltage.

02
 CONCRETE
MATERIAL TESTING EQUIPMENT
Compression and Flexural Testing Machines
HIGH CAPACITY SEMI-AUTOMATIC COMPRESSION TESTING MACHINES

Product Code

UTC-4630 Distance Pieces, Ø 165x15 mm

UTC-4631 Distance Pieces, Ø 165x30 mm
UTC-4633 Distance Pieces, Ø 165x50 mm
UTC-4634 Distance Pieces, Ø 165x90 mm
UTC-4636 Distance Pieces, Ø 205x30 mm
UTC-4638 Distance Pieces, Ø 205x50 mm
UTC-4639 Distance Pieces, Ø 205x90 mm

Standards

EN 12390-3, 12390-4; BS 1881; ASTM C39

Distance pieces are used to reduce the amount of vertical clearance between the upper platen and the lower platen. 2000 kN , 3000 kN and
4000 kN machines are supplied with 205 mm dia. distance pieces and 600 kN and 1500 kN machines are supplied with 165 mm dia. distance
pieces to lower the minimum distance between upper and lower platens down to required height.

Big size distance pieces are equipped with handles.

UTC-4630

UTC-4631 UTC-4636

UTC-4633 UTC-4638

UTC-4634 UTC-4639

Loading Cylinder Assembly and Distance Pieces Distance Pieces

Limit Switch

Dimensions Weight (approx.)

UTC-4630 165x165x15 mm 2,5 kg
UTC-4631 165x285x30 mm 5 kg
UTC-4633 165x285x50 mm 8 kg
UTC-4634 165x285x90 mm 14 kg
UTC-4636 205x290x30 mm 8 kg
UTC-4638 205x290x50 mm 13 kg
UTC-4639 205x290x90 mm 22 kg

Loading Cylinder Assembly

LOADING CYLINDER ASSEMBLY

All frames have a single acting up stroking ram. The diameter of the piston is designed to work with the load capacity.

The maximum ram movement is 50 mm. The pressure transducer is used for load measurements. There is a low friction coaxial PTFE seal
between the cylinder and the piston fitted to the cylinder.

03
 FRAME ACCESSORIES

Product Code

UTC-4510 Upper Loading Platen (with ball seating assembly) Ø 105 mm,Lower Loading Platen Ø 105 mm, ASTM C39
UTC-4511 Upper Loading Platen (with ball seating assembly) Ø 165 mm, Lower Loading Platen Ø 165 mm, ASTM C39
UTC-4512 Upper P Loading laten (with ball seating assembly) Ø 216 mm, Lower Loading Platen Ø 216 mm, ASTM C39
UTC-4513 Upper Loading Platen (with ball seating assembly) Ø 300 mm, Lower Loading Platen Ø 300 mm, EN 12390-4
UTC-4515 Upper Loading Platen (with ball seating assembly) 310x500x38 mm, Lower Loading Platen 310x500x38 mm, EN 772-1

Standards
ASTM C39; EN 12390-4, 772-1

The platens enable the testing of a wide variety of cylinder, cube blocks or similar samples.

• Manufactured from high quality steel, which is then hardened, smoothed and finished.
• The roughness value for the surface texture of the auxiliary platens is ≤ 3.2 µm.
• UTC-4511, UTC-4512 and UTC- 4513 have centering rings on the lower platens for proper centering of
100 mm and 150 mm cube, 100 mm and 150 mm cylinder samples.
• Ø 300 mm UTC-4513 has an specimen centering apparatus on lower platen as standard or 150m cube and 150 dia. cylinder

UTC-4511 UTC-4512 UTC-4513 Centering apparatus on UTC-4513 UTC-4515

UTC-4510 UTC-4511 UTC-4512 UTC-4513 UTC-4515

Description Upper Platen Upper Platen Upper Platen Upper Platen Upper Platen (with ball
(with ball seating (with ball seating (with ball seating (with ball seating seating assembly)
assembly) Ø 105 mm, assembly) Ø 165 mm, assembly) Ø 216 mm, assembly) Ø 300 mm, 310x500x38 mm,
Lower Platen Ø 105 mm Lower Platen Ø 165 mm Lower Platen Ø 216 mm Lower Platen Ø 300 mm Lower Platen
310x500x38 mm
Samples 2" , 3" , 4" dia. cylinders 4" , 6" dia. cylinders 6" dia. cylinders 100,150,160 mm Blocks up to
100 mm cubes 100, 150 mm cubes cylinders - 100, 150, 200 310x500 mm
mm cubes
Used with listed UTC-4700, UTC-4710, UTC-4700, UTC-4710, UTC-4710, UTC-4721, UTC-4720, UTC-5720, UTC-4710, UTC-4721,
frames UTC-4721, UTC-4731, UTC-4721, UTC-4731, UTC-4731, UTC-4720, UTC-4730, UTC-5730, UTC-4731, UTC-4720,
UTC-4720, UTC-5720, UTC-4720, UTC-5720, UTC-5720, UTC-4730, UTC-5740, UTC-5750 UTC-5720, UTC-4730,
UTC-4730, UTC-5730, UTC-4730, UTC-5730, UTC-5730, UTC-5740, UTC-5730, UTC-5740,
UTC-5740, UTC-5750 UTC-5740, UTC-5750 UTC-5750 UTC-5750
Standards ASTM C39 ASTM C39 ASTM C39 EN 12390-4 EN 772-1
EN 12390-4
Hardness ≥ 55 HRC ≥ 55 HRC ≥ 55 HRC ≥ 53 HRC ≥ 600 HV
( not less than )
Dimensions 110x110x130 mm 170x170x130 mm 220x220x130 mm 310x310x175 mm 320x510x175 mm
Weight 7 kg 20 kg 37 kg 75 kg 130 kg

128
$
5"/")

"((3&("5&
 $JJUHJDWH(TXLSPHQW

7KLFNQHVV*DXJH$*
%6
)RUGHWHUPLQLQJWKHIODNLQHVVLQGH[RIFRDUVHDJJUHJDWH*DOYDQL]HGPHWDOVKHHWKROHVL]H[[
[[[[[
$OVRUHTXLUHGEXWQRWSDUWRIWKLVVHW
*( 'LDO2*UDP%DODQFH
*( 0L[LQJ%RZO

'LPHQVLRQO[Z[K  [[FP

*URVV:HLJKW  NJ 

%UDVV5RXQG6LHYH$*$$*
)RUGHWHUPLQLQJJUDLQVL]HGLVWULEXWLRQRIVRLOSDUWLFOHVRUVDQGJUDYHO
%UDVVIUDPHGLD

7\SH 3DUWV1DPH 6SHFLILFDWLRQ

$*$ 6LHYH 0HVKPPRSHQLQJ
$*$ 6LHYH 0HVKPPRSHQLQJ
$*$ 6LHYH 0HVKPPRSHQLQJ
$*$ 6LHYH 0HVKPPRSHQLQJ
$*$ 6LHYH 0HVKPPRSHQLQJ
$*$ 6LHYH 0HVKPPRSHQLQJ
$*$ 6LHYH 0HVKPPRSHQLQJ
$*$ 6LHYH 0HVKPPRSHQLQJ
$*$ 6LHYH 0HVKPPRSHQLQJ
$*$ 6LHYH 0HVKPPRSHQLQJ
$*$ 6LHYH 0HVKPPRSHQLQJ
$*$ 6LHYH 0HVKPPRSHQLQJ
$*$ 6LHYH 0HVKPPRSHQLQJ
$*$ 6LHYH 0HVKPPRSHQLQJ
$*$ 6LHYH 0HVKPPRSHQLQJ
$*$ 6LHYH 0HVKPPRSHQLQJ
$*$ 6LHYH 0HVKPPRSHQLQJ
$*$ 6LHYH 0HVKPPRSHQLQJ
$*$ 6LHYH 0HVKPPRSHQLQJ
$*$ 6LHYH 0HVKPPRSHQLQJ
$*$ 6LHYH 0HVKPPRSHQLQJ
$*$ 6LHYH 0HVKPPRSHQLQJ
$*$ 6LHYH 0HVKPPRSHQLQJ
$*$ 6LHYH 0HVKPPRSHQLQJ
$*$ 6LHYH 0HVKPPRSHQLQJ
$*$ 6LHYH 0HVKPPRSHQLQJ
$*$ 6LHYH 0HVKPPRSHQLQJ
$*$ 6LHYH 0HVKPPRSHQLQJ
$*$ 6LHYH 0HVKPPRSHQLQJ
$*$ 6LHYH 0HVKPPRSHQLQJ
$*$ 6LHYH 0HVKPPRSHQLQJ
$*$ 6LHYH 0HVKPPRSHQLQJ
$*$ 6LHYH 0HVKPPRSHQLQJ
$*$ 6LHYH 0HVKPPRSHQLQJ
$* 3DQG &RYHU

'LPHQVLRQO[Z[K  [[FP


*URVV:HLJKW  NJ


6WDLQOHVV6WHHO5RXQG6LHYH$*$*
)RUGHWHUPLQLQJJUDLQVL]HGLVWULEXWLRQRIVRLOSDUWLFOHVRUVDQGJUDYHO
6WDLQOHVVVWHHOIUDPHGLD

7\SH 3DUWV1DPH 6SHFLILFDWLRQ

$*$ 6LHYH 0HVKPPRSHQLQJ
$*$ 6LHYH 0HVKPPRSHQLQJ
$*$ 6LHYH 0HVKPPRSHQLQJ
$*$ 6LHYH 0HVKPPRSHQLQJ
$*$ 6LHYH 0HVKPPRSHQLQJ
$*$ 6LHYH 0HVKPPRSHQLQJ

™™™Ǥ—Ž–‹„‹ƒǤ…‘ȈŠǤΪ͸ʹʹͳͷ͵ͳͶͳͳʹͷȁͷ͵ͳͶͳͲ͸͵Ȉ•ƒŽ‡•̷—Ž–‹„‹ƒǤ…‘Ǥ‹† 
 $JJUHJDWH(TXLSPHQW

6LHYH6KDNHU$*
+DQGRSHUDWHGVWHHOER[FDVWDOXPXQLXPSXOOH\VLHYHGLDVLHYHFDSDFLW\VXSSOLHGZLWKRXWVLHYHSDQ
FRYHU

'LPHQVLRQO[Z[K  [[FP


*URVV:HLJKW  NJ

(OHFWULF6LHYH6KDNHU$*
(OHFWULF9$&:DWWVWHHOEDVHFDVWDOXPXQLXPSXOOH\VLHYHGLDVLHYHFDSDFLW\VXSSOLHG
ZLWKRXWVLHYHSDQ FRYHU

'LPHQVLRQO[Z[K  [[FP


*URVV:HLJKW  NJ

6DQG(TXLYDOHQW7HVW6HW$*
$670' $$6+727
)RULQGLFDWLQJUHODWLYHSURSRUWLRQRIFOD\OLNHPDWHULDODQGILQHGXVWLQJUDQXODUVRLORUJUDGHGDJJUHJDWH

7\SH 3DUWV1DPH 6SHFLILFDWLRQ 4W\

$* *UDGXDWHG&\OLQGHU 7UDQVSDUHQWILEUHJODVVLGRGKHLJKW
ZLWKVFDOH 3FV
$* 6WRSHU$VVHPEO\ 5XEEHU6WRSHULUULJDWLRQWXEHKRVHV\SRQ 6HW
$* :HLJKW)RRW$VVHPEO\ 0DFKLQHVWHHOJDOYDQL]HGJUZHLJKWVDQGUHDGLQJ
LQGLFDWRU 6HW
$* 6WRFN6ROXWLRQ &DOFLXPFORULGHJO\VHULQDQGIRUPDOGHK\GHVROXWLRQ
6XSSOLHGLQDSODVWLFFRQWDLQHUOWU %WO
$* &DUU\LQJ&DVH :RRGHQFDVHZLWKKDQGOH 3F
*( 7KLQ%R[ $OXPXQLXPJUFDSDFLW\ 3FV
*( )XQQHO 3ODVWLFQDUURZPRXWK 3F

$OVRUHTXLUHGEXWQRWSDUWRIWKLVVHW
$*$ 6LHYH1R
$* 3DQ &RYHU
*( 5XEEHU*ORYHV

'LPHQVLRQO[Z[K  [[FP

*URVV:HLJKW  NJ

6DQG(TXLYDOHQW6KDNHU$*
$670' $$6+727
7RJLYHJUHDWHUXQLIRUPLW\DFWLRQKDQGRSHUDWHGPRXQWLQJEUDFNHWZLWKF\OLQGHUKROGHUWZRVSULQJVWHHO
VWUDSHVEXLOWLQFRXQWHUZRRGHQFDVH6XSSOLHGZLWKRXWJUDGXDWHGF\OLQGHU

'LPHQVLRQO[Z[K  [[FP

*URVV:HLJKW  NJ

%RWWOH5ROOHU$*
%6 $670&
(OHFWULF9:DWW+]3KDVH5306XSSOLHGFRPSOHWHZLWKNJFDSDFLW\JODVVMDU

'LPHQVLRQO[Z[K  [[FP

*URVV:HLJKW  NJ

™™™Ǥ—Ž–‹„‹ƒǤ…‘ȈŠǤΪ͸ʹʹͳͷ͵ͳͶͳͳʹͷȁͷ͵ͳͶͳͲ͸͵Ȉ•ƒŽ‡•̷—Ž–‹„‹ƒǤ…‘Ǥ‹† 
 SOIL LAB
79
Classifier, Plastic & Shrinkage

H-4254

H-4165

H-4180A
H-4180D

H-4262
H-4253 HM-4501

Harvard Miniature Compaction Apparatus direct load values in pounds during field work. H-4915.025 graduated cylinder, and (1) H-1350.3A
Used for moisture density tests using small sam- Both testers are sturdily made of light and durable Pkg. of 48 sample cans All components are also
ples, its compaction action duplicates the knead- aluminum and feature a geared, hand-wheel load- available individually.
ing action of a sheepsfoot roller. Mold is 1.2625" ing system. Both include a load ring and a wide 4" Plastic Limit Set H-4253
(33mm) ID by 2.816" (71mm) H. Unit is designed platen. The H-4180A features an adjustable height Shipping wt. 11 lbs (5kg)
so collar remover and specimen ejector are con- scale, while the H-4180D features a dial indicator Calcium Carbonate Content Chamber
solidated into one piece. Set includes specimen to determine vertical travel. The H-4180D is sup- This test method covers the quantitative determi-
ejector, collar remover with spacer plate, mold plied with a calibraiton chart for precise measure- nation of the calcium carbonate (CaCO3) content
holder, 1/454 ft3 (129m3) volume mold and collar, ment readings. of soils. It is a gasometric method that utilizes a
compaction tamper with 20 lb. (9.07kg), 37.5 lb. Unconfined Soil Tester, 500lb (2.25kN) H-4180A simple portable apparatus. The test method is
(17kg), and 40 lb. (18.2kg) spring and operating Unconfined Soil Tester, 1000lb (4.54kN) H-4180D quickly performed for soils containing calcium
instructions. Mold is machined from seamless tub- Shipping wt. 18 lbs (8.2kg) carbonate. The acrylic chamber is 2.5" ID x 5.5"
ing. Unit weight in pounds per ft3 m3 and the net Shrinkage Limit Set long and sealed with anodized end caps. The unit
weight of a compacted specimen in grams are fig- Apparatus recommended to perform shrinkage comes complete with 10psi test gauge, bleed
uratively equal. limit test in accordance with specifications. Set valve and a 20ml cup with handle.
H-4165 Individual Components includes: (1) H-4256 monel shrinkage dish; (1) Calcium Carbonate Content Chamber HM-4501
Mold assembly H-4165.15 H-4930.250 mixing dish; (1) H-4254C crystallizing Shipping wt. 6.1 lbs (2.7kg)
dish; (1) H-4255A shrinkage prong plate, and (1) Plastic Limit Roller
Tamper assembly H-4165.16
H-4915.025 graduated cylinder All components ASTM D4318; AASHTO T90; TX DOT 105-E
Spring, 20 lb. H-4165.20 are also available individually.
Easily repeatable mechanical technique produces
Spring, 37.5 lb. H-4165.375 Shrinkage Limit Set H-4254 consistent test results and saves time. Includes
Shipping wt. 3 lbs (1.3kg)
Spring, 40 lb. H-4165.40 integral top plate/handle, one pad of 50 sheets of
Adhesive Paper special adhesive backed paper to cover contact
Harvard Miniature Compaction Apparatus H-4165 Pad of 50 sheets of special adhesive backed paper surfaces (paper will not introduce fibers into soil
Shipping wt. 28 lbs (12.6kg) for plastic limit. samples), and instructions. Rigid acrylic 8 x 4.5 x
Unconfined Soil Testers Adhesive Paper H-4262P 1.25" (203 x 114 x 32mm).
These Unconfined soil testers allow for quick and Shipping wt. 0.5 lbs (0.2kg) Plastic Limit Roller H-4262
accurate determination of unconfined compres- Plastic Limit Set Shipping wt. 3 lbs (1.3kg)
sive strength of cohesive soils in the field or lab. ASTM D4318; AASHTO T90
The H-4180A Tester is a "Rimac" replacement. It
Includes all apparatus recommended to perform
can be used for on-site pile tonnage or foundation
plastic limit test in accordance with specifications.
bearing capacity estimates. Its light and compact
Set includes the following: (1) H-4253.1 plastic limit
design provides portability for everyday field use.
plate, 12 x 12 x .375" (305 x 305 x 9.5mm) thick;
Load Ring readout provides fast and easy-to-read
(1) H-4930.250 mixing dish; (1) H-4904 spatula; (1)

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

 SOIL LAB
80 Atterberg Limits

H-4228
H-4230 H-4226

H-4232
H-4229P

H-4229

H-4222D
H-1350.3A

Accessories

H-4234 ASTM metal grooving tool

H-4915.025 H-4229
and gauge block
H-4233
(shown with base, ASTM plastic grooving
not included) H-4229P
tools (10 pk)
AASHTO liquid limit metal
Atterberg Limits (Liquid Limit Testing) ASTM Liquid Limit Machine H-4232
grooving tool
Liquid limit testing determines the water content at ASTM D4318; AASHTO T89, T90
which soil changes from a liquid to a plastic state. Mixing dish H-4930.250
Unit consists of brass cup, cam mechanism, car-
It is determined using the devices on this page. To riage and crank mounted on a hard rubber base. Spatula H-4904
perform, a soil sample is placed into the cup of the Includes H-4229 ASTM grooving tool and gauge Graduated cylinder (25ml) H-4915.025
liquid limit machine and separated into two halves block. Crank can be shifted to right- or left-hand Sample cans, 2.5 oz. (48 pk.) H-1350.3A
using a grooving tool. The crank on the machine operation.
is then rotated so that the cup holding the sam- Replacement Parts
ASTM Liquid Limit Machine H-4230
ple strikes the base of the test machine. The num- Shipping wt. 5.5 lbs (2.5kg) Brass cup w/ screws for
H-4231
ber of blows is recorded until the two halves flow liquid limit machines
ASTM Liquid Limit Machine with Counter
together and close the groove. Brass cup w/ screws and
ASTM D4318; AASHTO T89, T90 H-4231.1
ASTM Liquid Limit Test Set cam follower
Hand-operated liquid limit machine features
ASTM D4318; AASHTO T89, T90
mechanical revolution counter attached to the Stainless steel cup w/ screws
Recommended for performing liquid limit test in H-4231.2
shaft to register the number of drops in the liquid (non ASTM)
accordance with ASTM specifications. Includes limit cup. Includes H-4229 ASTM grooving tool Base H-4230.1
1 ea. of: H-4230 ASTM liquid limit machine, and gauge block. Crank can be shifted for left or
H-4930.250 mixing dish, H-4904 spatula, right-hand operation. Resiliency Tester
H-4915.025 graduated cylinder and a H-1350.3A ASTM D4318; AASHTO T89, T90
ASTM Liquid Limit Machine with Counter H-4228
48 sample cans pack. Used to test resiliency of hard rubber base of liquid
Shipping wt. 6 lbs (2.7kg)
ASTM Liquid Limit Test Set H-4234 limit machines, which should be done at 90-day
ASTM Liquid Limit Machine, Motorized
Shipping wt. 11 lbs (5kg) intervals to ensure base is in compliance with
ASTM D4318; AASHTO T89, T90
ASTM Liquid Limit Test Set with Counter ASTM D4318 standard. .
Motorized liquid limit machine gives uniform test- Resiliency Tester H-4233
ASTM D4318; AASHTO T89, T90
ing with greater degree of accuracy. Unit is com- Shipping wt. 1.2 lbs (0.5kg)
Same set as above except it has machine with prised of H-4230 ASTM liquid limit machine with
counter. Includes 1 ea. of: H-4228 ASTM liquid Durometer (D Scale)
geared motor to give proper operating speed and
limit machine, H-4930.250 mixing dish, H-4904 ASTM D4318, D2240; AASHTO T89, T90
automatic counter. Machine is attached to metal
spatula, H-4915.025 graduated cylinder and a plate with rubber feet. Includes H-4229 ASTM As required by ASTM D4318, a durometer is used
H-1350.3A 48 sample cans pack. grooving tool and gauge block. to test the hardness of the base of a liquid limit
ASTM Liquid Limit Test Set w/ Counter H-4235 machine. Sealed springs maintain load deflection
Liquid Limit Machine, 120V 60Hz H-4226
Shipping wt. 15 lbs (7kg) rate to a tolerance of .0004". Other models are
Liquid Limit Machine, 220V 50Hz H-4226.5F
also available, see page 268.
Shipping wt. 14 lbs (6.4kg)
Durometer (D Scale) H-4222D
Shipping wt. 1.7 lbs (0.7kg)

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

 AGGREGATE
66
L.A. Abrasion, Slake, Flakiness

HM-4100

HM-4100.2

H-3860.100
(shown with H-3860A, not included)
H-3860D

Flakiness Sieves

Los Angeles Abrasion Machine Abrasion Charge

ASTM C131, C535; AASHTO T96 ASTM C131, C535; AASHTO T96
The Los Angeles abrasion machine is used to Replacement abrasive charge for H-3860 Los
measure the degradation of mineral aggregate of Angeles abrasion machine. Consists of 12
standard gradings resulting from a combination hardened-steel balls.
Slake Wire Mesh Drums
of actions including abrasion or attrition, impact Abrasion Charge H-3865 ASTM D4644
and grinding in a rotating steel drum containing Shipping wt. 12 lbs (6kg)
Set of two wire mesh drums for use with Slake
a specified number of steel spheres. The test is Materials Catch Pan for LA Abrasion
durability apparatus.
widely used as an indicator of the relative quality Replacement pan for use with LA abrasion
of various sources of aggregate having similar machine. Dimensions: 24" x 24" x 4" (609 x 609 x Slake Wire Mesh Drums HM-4100.1
Shipping wt. 20 lbs (9.1kg)
mineral compositions. 101mm), tapered sides.
Drum and Tank Assembly
Humboldt's design follows the ASTM-preferred Materials Pan for LA Abrasion H-3860.19
Shipping wt. 20.9 lbs (9kg)
ASTM D4644
design and features a welded, structural-steel
Sound Enclosure for LA Abrasion Machine Set of two wire mesh drums and water tank
frame, fabricated .5"-thick (913mm) abrasion-
Full enclosure designed to cut down on noise assemblies.
resistant steel drum, a removable shelf, bolted to
the drum and a balanced drum assembly for easy generated while using the LA abrasion machine. Drum and Tank Assembly HM-4100.2
Shipping wt. 45lbs (20.4kg)
rotation by hand. The enclosed chain drive rotates Unit is steel construction with foam lining for noise
reduction. Flakiness Sieves Set
the drum without a conventional slip clutch. This
Sound Enclosure for LA Abrasion H-3860.100 BS 812
positive drive delivers greater accuracy. The self-
contained worm-drive motorized speed reducer Shipping wt. 250 lbs (113kg) Complete set of flakiness sieves. These sieves are
has anti-friction bearings and sealed lubrication. Slake Durability Apparatus used to determine if aggregate is flaky. Aggregate
The 1hp, electronically-controlled motor is ASTM D4644 is considered flaky if its thickness is less than
equipped with large, push-button controls and an The Slake durability apparatus is used to 0.6 of nominal size. Set is comprised of Sieves
automatic overload cutout. The controls can be determine the durability of rocks and the probable listed in the chart below. Sieves can be ordered
removed from the Abrasion Machine and mounted amount of deterioration of weak rocks, over separately as well.
outside a sound enclosure or mounted on a nearby a period of time, after simulated exposure to Model Size (W x L) Passing Retained
wall. Unit includes user-configured, revolution nature’s continual wetting and drying cycles. The
H-4392.4.9 4.9 x 30mm 10mm 6.3mm
counter, a material catch pan and one abrasion apparatus consists of a base-mounted, motor-drive
H-4392.7.2 7.2 x 40mm 14mm 10mm
charge consisting of 12 hardened-steel balls. unit with two mesh drums and two water tanks
Dimensions: 39" x 29" x 37" (991 x 737 x 940mm). with quick-release drive assemblies. The drums H-4392.10.2 10.2 x 50mm 20mm 14mm
LA Abrasion Machine, 120V 60Hz H-3860D rotate at a speed of 20 revolutions per minute. H-4392.14.4 14.4 x 60 mm 28mm 20mm
LA Abrasion Machine, 220V 60Hz H-3860D.2F Options include two extra drums and tanks for H-4392.19.7 19.7 x 80mm 37.5mm 28mm
LA Abrasion Machine, 220V 50Hz H-3860D.5F running up to four tests simultaneously. To aid in H-4392.26.3 26.3 x 90mm 50mm 37.5mm
Shipping wt. 870 lbs (394kg)
sample preparation, additional mesh drums are
H-4392.33.9 33.9 x 100mm 63mm 50mm
recommended. Dimensions: 48" x 14" x 9.25"
(1,219 x 355 x 235mm)
Flakiness Sieves Set H-4392
Slake Durability, 120V 60Hz HM-4100 Shipping wt. 33 lbs (15.8kg)
Slake Durability, 220V 50Hz HM-4100.5F
Shipping wt. 78 lbs (32kg)

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

 AGGREGATE
61
Air-Jet Sieve, Specific Gravity

H-3360

H-4334A.2

H-4334A.3F

H-3373A

H-4335F200

H-4334A.3 H-4334A.4 H-3380 H-3381

Micron Air-Jet Sieving Apparatus Specific Gravity of Fine Aggregate Kit,

U.S. Std.
Effective single sieve for dry powders, fragile Micron Model ASTM C128; AASHTO T84
Mesh
samples or material that can’t be wet sieved, Kit designed to provide you with the basic
No. 8 2360 H-4335F8
Micron air-jet sieve shaker uses 200mm dia. sieve equipment to do specific gravity and absorption of
drums, with 2mm to 20μ particle size range. Unit No. 10 200 H-4335F10 fine aggregate testing. The kit includes a H-3360
adapts to 75mm diameter electro-formed sieves No. 12 1700 H-4335F12 conical mold and tamper; H-3381 pycnometer top
in 90mm drums for 45μ to 5μ. Timer and vacuum and 1 qt. (.95L) glass jar, HB-4533A .1g readability,
No. 14 1400 H-4335F14
controls allow reproducibility of the results. Filter 2600 gram scale; H-30120 lab oven, and H-3966
attachment, micro-mesh sieve or cyclone collector No. 16 1180 H-4335F16
.75" (19mm) sample splitter.
accessories may be used to recover fines. Includes No. 18 850 H-4335F18 Specific Gravity Kit, 120V 60Hz H-3373A
200mm cast aluminum sieve drum housing unit, No. 20 850 H-4335F20 Specific Gravity Kit, 230V 50/60Hz H-3373A.4F
acrylic lid, 15W slotted brass air nozzle, 0-15 minute Shipping wt. 132 lbs (60kg)
No. 25 710 H-4335F25
rotary timer switch. Vacuum and Sieves are not Conical Mold and Tamper
included. Accessories and air-jet sieve drums are No. 30 600 H-4335F30 ASTM C128; AASHTO T84
available; call for details and pricing. No. 35 500 H-4335F35 Used for determination of bulk and apparent
Micron Air Jet Apparatus, 120V 60Hz H-4334A.3F No. 40 425 H-4335F40 specific gravity and absorption of fine aggregate.
Shipping wt. 168 lbs (30kg)
Brass mold is 40mm ID at top, 90mm ID at bottom,
No. 45 355 H-4335F45
75mm high. Steel tamper weighs 12 oz (340g) and
No. 50 300 H-4335F50 has 1" dia. (25mm) flat circular tamping face.
Model Description
No. 60 250 H-4335F60 Conical Mold and Tamper H-3360
H-4334A.2 HEPA Vacuum System Conical Mold Only H-3361
No. 70 212 H-4335F70
High-Efficiency HEPA Vacuum Tamper Only H-3362
H-4334A.3 No. 80 180 H-4335F80 Shipping wt. 1.8 lbs (1kg)
System
H-4334A.4 High-Efficiency Cyclone No. 100 150 H-4335F100 Pycnometer Top and Glass Jar
No. 120 125 H-4335F120 ASTM C128
Micron Air-Jet Sieves Pycnometer top and 1qt. (.95L) glass jar set for
No. 140 106 H-4335F140
ASTM E11 determining specific gravity of fine aggregate.
No. 170 90 H-4335F170
For use with Air-Jet sieving systems. Stainless steel Top is spun brass with .375" (10mm) hole in one
frame and cloth mesh. 7.875" dia. (200mm) frame No. 200 75 H-4335F200 end; threaded end fits 1- or 2-qt. (1 or 2L) glass
with rubber seal. Overall height: 1.75" (44.5mm). No. 230 63 H-4335F230 jar. Includes rubber gasket that fits on jar mouth to
Depth to cloth: 1.125" (28.6mm). Each sieve is prevent fine particles from becoming deposited in
No. 270 53 H-4335F270
supplied with a serial number and matching “Test the threads. Order additional jars below
Sieve Certificate” for traceability . No. 325 45 H-4335F325 Pycnometer Top and Glass Jar H-3381
Micron Air Jet Sieves see chart No. 400 38 H-4335F400 Glass Jar, 1qt. (.95L) H-3380.2
Shipping wt. 2 lbs (1kg) Pycnometer Top Only H-3380
No. 450 32 H-4335F450 Shipping wt. 2 lbs (1kg)
No. 500 25 H-4335F500
No. 635 20 H-4335F635

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

 AGGREGATE
62
Specific Gravity

HB-4508A

H-2712A.6

H-2712A
H-2713B HB-3515

H-2710A.1
H-3355
H-3351 H-3353 H-3371 H-3356 H-2715 H-3372

Specific Gravity Bench Heater/Circulator Assembly Sample Container

ASTM C20, C127, C642, C830, D1188, D2041, Comprised of a 200-watt, durable tank heater ASTM C88; AASHTO T104
D2726; AASHTO T85, T166, T209, T275 and circulating pump attached to stainless steel Used to immerse samples of coarse aggregates
Our specific gravity weighing bench is 46" bracket that hangs on specific gravity tank to in solution and transfer samples to oven. No. 8
(1168mm) tall with a 31" x 25" (787 x 635mm) maintain constant temperature bath. stainless steel wire mesh, bottom-soldered to
platform top, which includes a hole to Heater/Circulator Assembly frame after fabrication. Overall dimension: 5.5" x
accommodate the weigh-below scale feature; and, 120V 60Hz H-2712A.6 4" dia. (140 x 102mm).
a crank-operated shelf that lets you bring the water 220V 50/60Hz H-2712A.6.4F Sample Container H-3353
Shipping wt. 3.5 lbs (2kg) Shipping wt. 6 lbs (2.7kg)
tank up to the sample, making for easier sample
immersion. Recommended Scales: Specific Gravity Basket
Specific Gravity Bench H-2710A.1 Ohaus Explorer High-Capacity Balance ASTM C127
Shipping wt. 116 lbs (52kg) The Explorer high-capacity balance provides a
Stainless steel No. 8 wire stainless steel mesh
Specific Gravity Bench Set durable and accurate solution to this application .It
basket features reinforced construction and bail-
ASTM C20, C127, C642, C830, D1188, D2041, features internal calibration and a integral weigh-
type handle. Dimensions: 8" x 8" dia. (203 x
D2726; AASHTO T85, T166, T209, T275 below hook. The HB-4508A features a 24,000g
203mm).
capacity with a readability of 0.1g.
Our specific gravity weighing bench set includes Specific Gravity Basket H-3371
our deluxe bench, a H-2712 specific gravity tank kit 24,000g x 0.1g Precision Balance HB-4508A Shipping wt. 2.7 lbs (1.2kg)
Ship wt. 29lbs. (12.5kg)
with heater and circulating pump. Specific Gravity Sieve #4
Ohaus Ranger 7000 High-Capacity Balance Designed for use in specific gravity test
Order a weigh-below scale separately.
The Ranger 7000 balance has been designed for applications. Heavy-gauge brass construction
Specific Gravity Set, 120V 60Hz H-2713B industrial applications. The HB-3515 features a
8" Specific Gravity Sieve #4 H-3355
Specific Gravity Set, 220V 50/60Hz H-2713B.4F 15,000g capacity with a readability of 0.1g. and a
Shipping wt. 110 lbs (48kg)
12" Specific Gravity Sieve #4 H-3356
weigh-below hook. Shipping wt. 3lbs (1.4kg)
Specific Gravity Tank with Heater & Circulator 15,000g x 0.1g Precision Balance HB-3515 Hollow Tube Specific Gravity Cradle
ASTM C20, C127, C642, C830, D1188, D2041, Ship wt. 32lbs. (13.4kg)
Through this unique, yet simple stainless steel
D2726; AASHTO T85, T166, T209, T275 See page 294-295 for additional choices in bal- hollow tube designed, water displacement is
Polyethylene tank, 30 gal. (113.5L), which measures ances for use in this application. virtually eliminated for improved accuracy in
18" x 18" x 18" (457 x 457 x 457mm) and comes specific gravity test applications.
with a drain valve and overflow port. It also comes Sample Container Hollow Tube Specific Gravity Cradle H-2715
with a H-2712A.6, 200-watt, durable tank heater ASTM C88; AASHTO T104 Shipping wt. 2.4 lbs (1.1kg)
and circulating pump, both of which are attached For use in testing aggregate soundness, the Utility Bucket
to a stainless steel mounting bracket that holds container is used to immerse samples of coarse ASTM C127
both securely to the tank. aggregate in solution and then transfer samples Heavily galvanized utility bucket has wire-
Tank w/ Heater & Circulator, to an oven for uniform drying in minimum time. reinforced top edge, bail-type handle and 14-qt.
120V 60Hz H-2712A No. 4 stainless steel wire mesh, bottom soldered (13L) capacity.
220V 50/60Hz H-2712A.4F to frame after fabricating. Overall dimension: 10"
Shipping wt. 18 lbs (8kg)
Utility Bucket H-3372
x 4" dia. (254 x 102mm) with .125" (3mm) round Shipping wt. 4 lbs (1.6kg)
wire handle.
Sample Container H-3351
Shipping wt. 2.3 lbs (1.04kg)

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

 6RLO(TXLSPHQW

&RPELQDWLRQ3HUPHDPHWHU62
$670' $$6+727
)RUGHWHUPLQLQJFRHIILFLHQWRISHUPHDELOLW\RIVRLOVDPSOH

7\SH 3DUWV1DPH 6SHFLILFDWLRQ 4W\

62 6DPSOH&KDPEHU 7UDQVSDUHQWILEUHJODVVLGKHLJKW
FRPSHVVLYHVSULQJFDVWDOXPXQLLXPERG\ 6HW
62 )XQQHO 3ODVWLFZLGHPRXWKZLWKRYHUIORZ 3F
62 )UDPH $OXPXQLXP 3F
62 3RURXV6WRQH GLDWKLFN 3FV
*( %XUHWWH *ODVVPOFDSDFLW\ZLWKRXWVFDOH 3F
*( %HDNHU*ODVV POFDSDFLW\ 3F
*( 6WRS:DWFK VHFVZHHS[PLQ 3F

'LPHQVLRQO[Z[K  [[FP

*URVV:HLJKW   NJ
$OVRUHTXLUHGEXWQRWSDUWRIWKLVVHW
*( 7KHUPRPHWHU
*( 9HUQLHU&DOLSHU

&RPSDFWLRQ3HUPHDPHWHU7HVW6HW62$
)RUGHWHUPLQLQJFRHIILFLHQWRISHUPHDELOLW\RIFRPSDFWHGVRLOVDPSOH
7\SH 3DUWV1DPH 6SHFLILFDWLRQ 4W\
62 &RPSDFWLRQ3HUPHDPHWHU FXIWPROGLGLQOHWRXWOHWFRQQHFWRU
RYHUIORZYDOYHSRURXVVWRQH 6HW
62 )UDPH &DVWDOXPXQLXPEDVHDOXPXQLXPFROXPQ
EXUHWWHPPGLDPHWHU 6HW
*( *UDGXDWHG&\OLQGHU POFDSDFLW\ 3F
*( 6WRS:DWFK VHFVZHHS 3F

'LPHQVLRQO[Z[K  [[FP

*URVV:HLJKW   NJ
$OVRUHTXLUHGEXWQRWSDUWRIWKLVVHW
62 0RGLILHG3URFWRU+DPPHU
62 0RLVWXUH&RQWHQW7HVW6HW
$*$ 6LHYH1R
*( +HDY\'XW\6ROXWLRQ%DODQFH
*( 5RXQG6FRRS

6DQG&RQH7HVW6HW62
$670' $$6+727
)RUGHWHUPLQLQJWKHGHQVLW\RIFRPSDFWHGVRLOLQSODFH

7\SH 3DUWV1DPH 6SHFLILFDWLRQ 4W\

62 6DQG&RQH%RWWOH 3ODVWLFOWUFDSDSSUR[ 3F
62 6DQG&RQH)XQQHO 6HDPOHVVPHWDOWXUQLQJVWRSHUGLDERWWRP
QHFNGLD 3F
62 %DVH3ODWH &DVWDOXPXQLXP[ 3F
62 *UDGXDWHG6DQG 8QFHPHQWHGVDQGSDVVLQJUHWDLQHG
NJFDSDFLW\ =DN
*( 6DPSOH&DQ 5RXQGFDQWLQQHGPHWDO 3FV
*( 5RXQG6FRRS &DVWDOXPXQLXP 3F
*( 6SRRQ 6WDLQOHVVVWHHO 3F
*( 7URZHO 3RLQWHGW\SH 3F
*( &KLVHO +DUGHQHGW\SH 3F
*( 5XEEHU0DOOHW :RRGHQKDQGOH 3F
'LPHQVLRQO[Z[K  [[FP
*URVV:HLJKW   NJ
$OVRUHTXLUHGEXWQRWSDUWRIWKLVVHW
62 0RLVWXUH&RQWHQW7HVW6HW
*( +HDY\'XW\6ROXWLRQ%DODQFH
*( *ODVV3ODWH

 ™™™Ǥ—Ž–‹„‹ƒǤ…‘ȈŠǤΪ͸ʹʹͳͷ͵ͳͶͳͳʹͷȁͷ͵ͳͶͳͲ͸͵Ȉ•ƒŽ‡•̷—Ž–‹„‹ƒǤ…‘Ǥ‹†
 6RLO(TXLSPHQW

6DPSOH([WUXGHU62
)RUH[WUXGLQJVRLOVSHFLPHQWIURPPPVDPSOLQJWXEHZHOGHGVWHHOHOHFWULF9ROW:DWWSKDVH
6XSSOLHGZLWKRXWVDPSOLQJWXEH

'LPHQVLRQO[Z[K  [[FP

*URVV:HLJKW  .J

$OVRUHTXLUHGEXWQRWSDUWRIWKLVVHW
*( 6DPSOH&DQ
*( :LUH6DZ

'\QDPLF&RQH3HQHWURPHWHU62$
)RUUDSLGGHWHUPLQDWLRQRIILHOG&%5YDOXHUDSLGTXDOLW\FRQWURO

7\SH 3DUWV1DPH 6SHFLILFDWLRQ 4W\

62 +DQGOH 6WDLQOHVV6WHHO 3F
62 +DPPHU 0DFKLQHG6WHHO3DLQWHG.JZHLJKW 3F
62 *XLGH5RG 6WDLQOHVV6WHHOPPGLDGURSKHLJKWPP 3F
62 $QYLO 0DFKLQHG6WHHOZHOGHGSDLQWHG 3F
62$ 3HQHWUDWLRQ5RG 6WDLQOHVV6WHHOPPGLDFPHIIHFWLYHOHQJWK 3F
62 &RQH +DUGHQHGWRROVWHHOFRQHWLSƒDQJOHPPGLD 3FV
VWDLQOHVVVWHHODGDSWRU
62$ 3HQHWUDWLRQ6FDOH 6WDLQOHVV6WHHOPPGLDFPVFDOH 3F
62 &DUU\LQJ%DJ :DWHU3URRI&ORWK 3F
*($ 2SHQ(QG:UHQFK 9DQDGLXP6WHHO 3FV

'LPHQVLRQO[Z[K  [[FP

*URVV:HLJKW  .J

$OVRUHTXLUHGEXWQRWSDUWRIWKLVVHW
62 0RLVWXUH&RQWHQW7HVW6HW

&RUSVRI(QJLQHHU6RLO6XUIDFH6DPSOHU62
$670'
)RUGHWHUPLQLQJVRLOGHQVLW\LQSODFH

7\SH 3DUWV1DPH 6SHFLILFDWLRQ 4W\

62 +DPPHU 0DFKLQHG6WHHOJDOYDQL]HGOEVVOLGGLQJZHLJKW 6HW
IDOOLQJKHLJWK
62 +DPPHU 0DFKLQHG6WHHO*DOYDQL]HGRGLG 3FV
OHQJWK
'LPHQVLRQO[Z[K  [[FP
*URVV:HLJKW  .J

$OVRUHTXLUHGEXWQRWSDUWRIWKLVVHW
62 0RLVWXUH&RQWHQW7HVW6HW
*( 7ULSOH%HDP%DODQFH

™™™Ǥ—Ž–‹„‹ƒǤ…‘ȈŠǤΪ͸ʹʹͳͷ͵ͳͶͳͳʹͷȁͷ͵ͳͶͳͲ͸͵Ȉ•ƒŽ‡•̷—Ž–‹„‹ƒǤ…‘Ǥ‹† 
 SOIL
MATERIAL TESTING EQUIPMENT
Field Inspection and Sampling
DYNAMIC CONE PENETROMETER

Product Code

UTS-0095 TRL Dynamic Cone Penetrometer (DCP)

Standards
BS 1377:9

The UTS-0095 TRL Dynamic Cone Penetrometer is used for

the rapid, in situ measurement of structural properties of existing
road pavement constructed with unbound materials.

The design of the DCP is similar to that described by Kleyn, Maree

and Savage (1982); it incorporates an 8 kg weight dropping
through a height of 575 mm and 60° cone having a diameter of 20
mm. with the standard DCP measurements can be made down to
a depth of approximately 850 mm or when extension shafts are
used to a recommended maximum depth of 2 m.

Readings are usually taken after a set number of blows, changing

the number according to the strength of the layer being
penetrated. A typical test takes only a few minutes, therefore
the instrument provides a very efficient method of obtaining
information that would normally require the digging of test pits.

The penetration hammer assembly consists of 8 kg hammer,

hammer shaft, anvil with plastic plate coupling for ruler and
handle.

The TRL Dynamic Cone

Penetrometer is supplied
complete with

• A hammer assembly,
• Penetration rod,
• 2 piece 60° cone,
• Metal plate coupling for ruler,
• Segmented adaptor for extension rods,
• Segmented upper extension rod,
• Segmented lower extension rod,
• 2 piece 13-17mm AF spanners,
• 3 mm AF hex wrench,
• Tommy bar,
• A bottle of adhesive,10cc,
• Users Manual
• Steel ruler,
• Carrying Case, heavy-duty wooden

Dimensions 1200x350x200 mm
Weight (approx.) 30 kg

01
 SOIL, FIELD
22
CBR, Shear Strength

Both include a pelican case

H-4219T

Both DCPs include a Threaded Ends

a hard-cone tip and
a disposable
cone adapter

H-4219QC
Quick-Connect Ends

Dual-Mass Dynamic Cone Penetrometers Dual-Mass DCP, Threaded Ends H-4219T Dual-Mass DCP, Quick-Connect Ends H-4219QC
ASTM D6951 Ship wt. 66lbs. (29.5kg) Ship wt. 60lbs. (29.5kg)

Developed by the Army Corps of Engineers, Included with the H-4219T DCP: Included with the H-4219QC DCP:
Dynamic Cone Penetrometers (DCPs) provide a
Description Model Description Model
low-cost, efficient test method for quickly deter-
mining in-situ CBR values of pavement base, sub Dual-Mass DCP Hammer, Dual-Mass DCP Hammer,
H-4219T.1 H-4219QC.1
base and sub grades. DCPs are primarily used Threaded Connection Quick-Connect Connection
to determine in-place soil shear strength in road Drive Rod, Threaded, 37.75" Drive Rod, Quick-Connect,
H-4219T.2 H-4219QC.2
construction with CBR values from less than 0.5 (959mm) 37.75" (959mm)
to 100% and bearing values ranging from 430 to Quick-Connect Pins (2) H-4219QC.18
Disposable Cone Adapter H-4219.5
10,800 psf. They can readily be used for depths
from 30 inches to 6 foot with optional drive rods Hard Cone Tip H-4219.4 Disposable Cone Adapter H-4219.5
and extensions. All Humboldt DCPs comply with Disposable Cones Hard Cone Tip H-4219.4
H-4219.25
ASTM D6951 specifications and come with a chart (pkg of 25) Disposable Cones
to compute CBR values, as well as an Excel spread- H-4219.25
Scale, 48" H-4219.2 (pkg of 25)
sheet template, which automatically charts the test
Single-User Scale Guide Set H-4219.17 Scale, 48" H-4219.2
results.
Wrench Set (Threaded) H-4219T.7 Single-User Scale Guide Set H-4219.17
Humboldt's DCPs are known for their high quality
manufacturing and reliability, and, are available User Manual H-4219.MAN Wrench Set (Quick-Connect) H-4219QC.7
with either threaded connections or a quick-con- CD H-4219.CD User Manual H-4219.MAN
nect design. Both Humboldt DCPs feature our
Go, No-Go Gauge H-4219.3 CD H-4219.CD
exclusive easy-grip hammer that provides a finger
grip machined into the back side of the hammer Pelican Case H-4219.16 Go, No-Go Gauge H-4219.3
flange, which provides easy, non-slip lifting when Pelican Case H-4219.16
performing a test. Accessories Model
Humboldt DCPs consist of a drive hammer and Drive Rod, 12-inch
H-4219T.12 H-4219QC.12
steel extension shaft assembly with a 60° hard- Threaded
H-4219T.12
ened cone tip attached at one end. The cone tip
Drive Rod, 12-inch
is driven into the pavement or sub grade by means H-4219QC.12
Quick-Connect
of a sliding dual-mass hammer. The diameter at H-4219.8
the base of the cone is 20 millimeters, which is 8 Extension Rod, 24-inch,
millimeters larger than that of the extension shaft. Threaded (For use with both
H-4219.8
Hammer weight is 17.7 lbs and the hammer drop Quick-Connect and Threaded
distance is 22.6" (574mm). Humboldt DCPs can models)
also quickly convert to a single-mass unit for use in Disposable Cones (100 pk.) H-4219.100
weaker soils having low CBR values or foundation
evaluations by removing the outer sleeve from the
dual-mass hammer. H-4219.100

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

 SOIL LAB
78
Load Frames, CBR
H-4152F

H-4454.050

H-4158.1

H-4156SB
H-4156J

H-4152F.1 H-4454.020
H-4470
H-4466.10

H-4152F.2 H-4179F.20
H-4178F.4
H-4179

H-4197F.10

H-4156

H-4152

CBR Mechanical Loading Press ring, a H-4178, 1.95" (49.5mm) dia. (3 in2 area) and 3.5 inches of lift. The use of the extension
ASTM D1883; AASHTO T193 penetration piston, a H-4158.1, 1.000" x .001, dial and connector set provides sufficient flexibility for
The H-4156 loading press (load frame) uses a indicator and a H-4178BR dial indicator bracket, almost any type of height requirement. The CBR
two-position mechanical jack to provide steady Overall dimensions: 18" x 12" x 34" (45.8 x 30.5 x field test set includes:
test speeds, as well as rapid travel of the platen 86.4cm). The CBR test set includes:
Part # Description
for positioning of the sample. The press, includes
a H-4454.100, 11,000lbf (48.8kN) calibrated load Part # Description H-4156J (1) 2-sp. gear box, handle & platen
ring, a H-4178, 1.95" (49.5mm) dia. (3 in2 area) H-4156 (1) Mechanical loading press H-4156SB (1) Swivel base
penetration piston, a H-4158.1, 1.000" x .001, dial H-4151 (4) Mold H-4454.020 (1) 2200 lbf load ring
indicator and a H-4178BR dial indicator bracket,
H-4153 (1) Spacer disk H-4454.050 (1) 5500 lbf load ring
Overall dimensions: 18" x 12" x 34" (45.8 x 30.5
x 86.4cm). H-4154 (4) Filter screens H-4152F.1 (1) CBR extension set
CBR Mechanical Loading Press H-4156 H-4172 (2) Swell plates H-4152F.2 (1) CBR connector set
Ship wt. 132lbs. (60kg)
H-4158 (1) Tripod attachment H-4158.1 (1) Dial indicator, 1.000" x 0.001"
Mechanical, Two-Speed Loading Jack H-4175 (4) Surcharge weights H-4152F.8 (1) Steel bridge support
Mechanical, two-speed loading jack used in the
H-4176 (4) Slotted surcharge weights H-4179F.10 (1) Surcharge weight, 10lb, 10"
H-4156 and H-4156M loading presses.
Mechanical, Two-Speed Loading Jack H-4156J H-4170A (1) Density hammer H-4179 (2) Slotted surcharge weight, 10lb
Ship wt. 42lbs. (19kg) H-4144.12 (1) Straight edge, 12-inch (2) Slotted surcharge weight,
H-4179F.20
CBR Mechanical Test Set H-4174 (1) Cutting edge 20lb, 8.5"
ASTM D1883; AASHTO T193
H-4470 (1) Magnetic indicator mount
Complete mechanical test set used for CBR test- CBR Mechanical Test Set H-4152
Ship wt. 379lbs. (172kg) H-4178F.4 (1) Penetration piston, 4"
ing. Includes a complete complement of test
equipment for performing CBR testing. The test CBR Field Test Set CBR Field Test Set H-4152F
set features the H-4156 loading press (load frame), ASTM D4429 CBR Field Test Set, Metric Indicators H-4152FM
which uses a two-position mechanical jack to pro- The CBR field test set is designed for making CBR Ship wt. 289 lbs. (131kg)
vide steady test speeds, as well as rapid travel of determinations in the field and is built around a
the platen for positioning of the sample. The press, modified H-4156 load frame. CBR field testing
includes a H-4454.100, 11,000lbf (48.8kN) cali- can quickly yield a relative strength determina-
brated load tion without having to rely on lab tests. Field tests
involve forcing a piston into the soil and compar-
ing the depth of penetration in relation to the load
placed on the piston. Typically, the reaction load
used for field testing is a heavy piece of equip-
ment, such as a loaded dump truck. Gear box is
2-speed model with a 10,000lbf (45kN) capacity

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

 SOIL LAB
78
Load Frames, CBR
H-4152F

H-4454.050

H-4158.1

H-4156SB
H-4156J

H-4152F.1 H-4454.020
H-4470
H-4466.10

H-4152F.2 H-4179F.20
H-4178F.4
H-4179

H-4197F.10

H-4156

H-4152

CBR Mechanical Loading Press ring, a H-4178, 1.95" (49.5mm) dia. (3 in2 area) and 3.5 inches of lift. The use of the extension
ASTM D1883; AASHTO T193 penetration piston, a H-4158.1, 1.000" x .001, dial and connector set provides sufficient flexibility for
The H-4156 loading press (load frame) uses a indicator and a H-4178BR dial indicator bracket, almost any type of height requirement. The CBR
two-position mechanical jack to provide steady Overall dimensions: 18" x 12" x 34" (45.8 x 30.5 x field test set includes:
test speeds, as well as rapid travel of the platen 86.4cm). The CBR test set includes:
Part # Description
for positioning of the sample. The press, includes
a H-4454.100, 11,000lbf (48.8kN) calibrated load Part # Description H-4156J (1) 2-sp. gear box, handle & platen
ring, a H-4178, 1.95" (49.5mm) dia. (3 in2 area) H-4156 (1) Mechanical loading press H-4156SB (1) Swivel base
penetration piston, a H-4158.1, 1.000" x .001, dial H-4151 (4) Mold H-4454.020 (1) 2200 lbf load ring
indicator and a H-4178BR dial indicator bracket,
H-4153 (1) Spacer disk H-4454.050 (1) 5500 lbf load ring
Overall dimensions: 18" x 12" x 34" (45.8 x 30.5
x 86.4cm). H-4154 (4) Filter screens H-4152F.1 (1) CBR extension set
CBR Mechanical Loading Press H-4156 H-4172 (2) Swell plates H-4152F.2 (1) CBR connector set
Ship wt. 132lbs. (60kg)
H-4158 (1) Tripod attachment H-4158.1 (1) Dial indicator, 1.000" x 0.001"
Mechanical, Two-Speed Loading Jack H-4175 (4) Surcharge weights H-4152F.8 (1) Steel bridge support
Mechanical, two-speed loading jack used in the
H-4176 (4) Slotted surcharge weights H-4179F.10 (1) Surcharge weight, 10lb, 10"
H-4156 and H-4156M loading presses.
Mechanical, Two-Speed Loading Jack H-4156J H-4170A (1) Density hammer H-4179 (2) Slotted surcharge weight, 10lb
Ship wt. 42lbs. (19kg) H-4144.12 (1) Straight edge, 12-inch (2) Slotted surcharge weight,
H-4179F.20
CBR Mechanical Test Set H-4174 (1) Cutting edge 20lb, 8.5"
ASTM D1883; AASHTO T193
H-4470 (1) Magnetic indicator mount
Complete mechanical test set used for CBR test- CBR Mechanical Test Set H-4152
Ship wt. 379lbs. (172kg) H-4178F.4 (1) Penetration piston, 4"
ing. Includes a complete complement of test
equipment for performing CBR testing. The test CBR Field Test Set CBR Field Test Set H-4152F
set features the H-4156 loading press (load frame), ASTM D4429 CBR Field Test Set, Metric Indicators H-4152FM
which uses a two-position mechanical jack to pro- The CBR field test set is designed for making CBR Ship wt. 289 lbs. (131kg)
vide steady test speeds, as well as rapid travel of determinations in the field and is built around a
the platen for positioning of the sample. The press, modified H-4156 load frame. CBR field testing
includes a H-4454.100, 11,000lbf (48.8kN) cali- can quickly yield a relative strength determina-
brated load tion without having to rely on lab tests. Field tests
involve forcing a piston into the soil and compar-
ing the depth of penetration in relation to the load
placed on the piston. Typically, the reaction load
used for field testing is a heavy piece of equip-
ment, such as a loaded dump truck. Gear box is
2-speed model with a 10,000lbf (45kN) capacity

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

%
6.6.
 6RLO(TXLSPHQW

6SHFLYLF*UDYLW\62%
$670' $$6+727
)RUGHWHUPLQLQJVSHFLILFJUDYLW\RIVRLODJJUHJDWHVDPSOH

7\SH 3DUWV1DPH 6SHFLILFDWLRQ 4W\

62 9DFXXP+RVH 3ODVWLFKRVHZLWKUXEEHUEXQJYDOYH 6HW
*( 0L[LQJ%RZO 6WDLQOHVVVWHHOPPGLD 3F
*( *UDGXDWHG&\OLQGHU POFDSDFLW\ 3F
*($ 9ROXPHWULF)ODVN POFDSDFLW\YDFXXP 3FV
*( )XQQHO *ODVVZLGHPRXWK 3F
*( :DVK%RWWOH POFDSDFLW\ 3F
*( 3LSHWWH *ODVVPOFDSDFLW\ 3F
*( 7KHUPRPHWHU 5DQJHR& 3F
*( 9DFXXP0DQRPHWHU GLDFQ+* 3F
*( 9DFXXP3XPS 5RWDU\SXPS 3F
'LPHQVLRQO[Z[K  [[FP
*URVV:HLJKW   NJ
$OVRUHTXLUHGEXWQRWSDUWRIWKLVVHW
$*$ 6LHYH1R
$* 3DQ &RYHU
*( &HQW2*UDP%DODQFH
*( 'U\LQJ2YHQ

&RPSDFWLRQ7HVW6HW62
$670'' $$6+7277
)RUGHWHUPLQLQJPRLVWXUHGQHVLW\UHODWLRQVKLS

7\SH 3DUWV1DPH 6SHFLILFDWLRQ 4W\

62 6WDQGDUG3URFWRU0ROG 0DFKLQHGVWHHOJDOYDQL]HGLG
KHLJKWKHLJKWRIFROODU 3F
62 6WDQGDUG3URFWRU0ROG 0DFKLQHGVWHHOJDOYDQL]HGLG
KHLJKWKHLJKWRIFROODU 3F
62 6WDQGDUG3URFWRU+DPPHU 0DFKLQHGVWHHOJDOYDQL]HGLGGURS
KHLJKWOEVZHLJKW 3F
62 6WDQGDUG3URFWRU+DPPHU 0DFKLQHGVWHHOJDOYDQL]HGLGGURS
KHLJKWOEVZHLJKW 3F
62 ([WUXGHU 6WHHOIUDPHK\GUDXOLFMDFN 6HW
*( 6TXDUH3DQ *DOYDQL]HGVWHHOO[[FP 3F
*( 7KLQ%R[ $OXPXQLXPJUFDSDFLW\ 3FV
*($ *UDGXDWHG&\OLQGHU 3ODVWLFPOFDSDFLW\ 3F
*( 6FRRS &DVW$OXPXQLXP 3F
*( 7URZHO 3RLQWHGW\SH 3F
*( 6WUDLJKW(GJH FPOHQJWK 3F
*( 5XEEHU0DOOHW :RRGHQKDQGOH 3F
*( 6WHHO:LLUH%UXVK :RRGHQKDQGOH 3F
'LPHQVLRQO[Z[K  [[FP
*URVV:HLJKW   NJ
$OVRUHTXLUHGEXWQRWSDUWRIWKLVVHW
62 0RLVWXUH&RQWHQW7HVW6HW
$*$ 6LHYH1R
*( +HDY\'XW\6ROXWLRQ%DODQFH
*( )LOWHU3DSHU

 ™™™Ǥ—Ž–‹„‹ƒǤ…‘ȈŠǤΪ͸ʹʹͳͷ͵ͳͶͳͳʹͷȁͷ͵ͳͶͳͲ͸͵Ȉ•ƒŽ‡•̷—Ž–‹„‹ƒǤ…‘Ǥ‹†
 GENERAL LAB
313
Pans & Bowls
H-3969

H-4353.2, H-4353.4, H-4353.6 H-4354.2, H-4354.4, H-4354.6 H-4355.2, H-4355.4, H-4355.6

H-4352.2, H-4352.4, H-4352.6

H-4941

H-4351.2, H-4351.4, H-4351.6

H-4940.2, H-4940.4, H-4936, H-4937, H-4938,

H-4356.2, H-4356.4, H-4356.6 H-4940.6, H-4940.8 H-4939, H-4939.5

Stainless Steel Rectangular Mixing Pans Stainless Steel Rectangular Mixing Pans Aluminum Rectangular Mixing Pans (Non-Stick)
Model Dimensions (L x W x D) Model Dimensions (L x W x D) Model Size (L x W x D)
10.375 x 6.375 x 2.5" 12.75 x10.375 x 4" 8" x 8" x 2"
H-3969 H-4354.4 H-4941
(264 x 162 x 64mm) (342 x 264 x 102mm) (203 x 203 x 51mm)

20.75 x 12.75 x 2.5" 15.375" x 10.875" x 2.375"

12.75 10.375 x 6" H-4351.2
H-4352.2 H-4354.6 (390 x 276 x 60mm)
(527 x 323 x 63mm) (342 x 264 x 152mm)
17.625" x 11.75" x 2.375"
20.75 x 12.75 x 4" 12.75 x 6.875 x 2.5" H-4351.4
H-4352.4 H-4355.2 (447 x 298 x 60mm)
(527 x 324 x 102mm) (342x 174 x 64mm)
25.75" x 17.75" x 3.5"
20.75 x 12.75 x 6" 12.75 x 6.875 x 4" H-4351.6
H-4352.6 H-4355.4 (654 x 450 x 89mm)
(527 x 324 x 152mm) (342x 174 x 102mm)
13.875 x 12.75 x 2.5" 12.75 x 6.875 x 6" Stainless Steel Round Mixing Bowls & Pans
H-4353.2 H-4355.6
(346 x 323 x 63mm) (342 x 174 x 152mm) Model Dimensions (L x W x D)
13.875 x 12.75 x 2.5" 14.875 x 10.25 x 2" H-4936 7.25" x 3" (198 x 76mm)
H-4353.4 H-4356.2
(346 x 323 x 63mm) 376 x 269 x 50mm) 1.5 qt. (1.4L)
13.875 x 12.75 x 6" 16.125 x 11.125 x 2.25" H-4937 9.5" x 3.5" (241 x 89mm)
H-4353.6 H-4356.4
(346 x 323 x 152mm) (409 x 282 x 57mm) 3 qt. (2.8L)
12.75 x10.375 x 2.5" 18.125 x 12.375 x 2.375" H-4938 12.5" x 5.5" (318 x 140mm)
H-4354.2 H-4356.6
(342 x 264 x 64mm) (460 x 314 x 60mm) 8 qt. (7.6L)

Aluminum Round Mixing Pans (Non-Stick) H-4939 10.75" x 4.75" (273 x 121mm)
5.5 qt. (5.2L)
Model Dimensions (L x W x D)
H-4939.5 17.5" x 6.5" (444 x 165mm)
H-4940.2 9" x 1.5" (228 x 38mm)
16 qts. (13.9L)
H-4940.4 10" x 1.5" (254 x 38mm)
H-4940.6 12" x 1.5" (304 x 38mm)
H-4940.8 15" x 1.5" (381 x 38mm)

www.humboldtmfg.com • 1.800.544.7220 • 708.468.6300

 Oven TR 450 Oven TR 1050 with double door

Additional equipment
„ Over-temperature limiter with adjustable cutout temperature for thermal protection class
2 in accordance with EN 60519-2 as temperature limiter to protect the oven and load
„ Infinitely adjustable fan speed of the air circulation fan
„ Window for charge observing
„ Further removeable grids with rails
„ Side inlet
„ Stainless steel collecting pan to protect the furnace chamber
„ Door hinges on the left side
„ Reinforced bottom plate
„ Safety technology according to EN 1539 for charges containing liquid solvents (TR .. LS)
up to model TR 240 LS, achievable temperature uniformity +/- 8 °C see page 59
„ Transport costors for model TR 450
„ Various modifications available for individual needs
„ Upgrading available to meet the quality requirements of AMS 2750 E or FDA
„ Process control and documentation via VCD software package for monitoring,
documentation and control see page 63

Model Tmax Inner dimensions Volume Outer dimensions Connected Electrical Weight Grids in- Grids Max. Oven TR 60 with observation window and
in mm in mm rotating device with selectable speed and
°C w d h in l W D H load kW2 connection* in kg cluded max. total load1 door lock
TR 60 300 450 390 350 60 700 610 710 3 1-phase 90 1 4 120
TR 60 LS 260 450 360 350 57 700 680 690 6 3-phase 92 1 4 120
TR 120 300 650 390 500 120 900 610 860 3 1-phase 120 2 7 150
TR 120 LS 260 650 360 500 117 900 680 840 6 3-phase 122 2 7 150
TR 240 300 750 550 600 240 1000 780 970 3 1-phase 165 2 8 150
TR 240 LS 260 750 530 600 235 1000 850 940 6 3-phase 167 2 8 150
TR 450 300 750 550 1100 450 1000 780 1470 6 3-phase 235 3 15 180
TR 1050 300 1200 670 1400 1050 1470 940 1920 9 3-phase 450 4 14 250
1
Max load per layer 30 kg *Please see page 60 for more information about supply voltage
2
If EN 1539 is ordered connected load will increase
27
 *HQHUDO(TXLSPHQW

3URYLQJ5LQJ*(
3UHFLVLRQPHDVXULQJGHYLFHKLJKJUDGHVWHHOZLWKSODWHGILQLVKLQJWDSSHGKROHDWERWKHQG6XSSOLHG
FRPSOHWHZLWKGLDODQGFDOLEUDWLRQFKDUW

7\SH 3DUWV1DPH 4W\

*( 3URYLQJ5LQJ  NJFDSDFLW\
*( 3URYLQJ5LQJ  OEVFDSDFLW\
*( 3URYLQJ5LQJ  OEVFDSDFLW\
*( 3URYLQJ5LQJ  OEVFDSDFLW\
*( 3URYLQJ5LQJ  OEVFDSDFLW\
*( 3URYLQJ5LQJ  OEVFDSDFLW\
*( 3URYLQJ5LQJ  OEVFDSDFLW\

'LDO,QGLFDWRU
7\SH 3DUWV1DPH 4W\
*( 'LDO,QGLFDWRU LQ [ LQ
*( 'LDO,QGLFDWRU LQ [ LQ
*( 'LDO,QGLFDWRU PP [ PP
*( 'LDO,QGLFDWRU PP [ PP
*( 'LDO,QGLFDWRU PP [ PP
*( 'LDO,QGLFDWRU PP [ PP

'LDO+ROGHU*(
&KURPHSODWHGVKDIWZLWKVLPSOHFODPSLQJGHYLFH
3RZHUIXOPDJQHWZLWKRQRIIVZLWFK3UHFLVLRQJURXQGVXUIDFH

%DODQFH
%HQFK6FDOHV'LJLWDO
*( %HQFK6FDOHV'LJLWDO .J[JU

&HQW2*UDP%DODQFH
*( &HQW2*UDP%DODQFH JUFDSDFLW\VHQVLWLYLW\
*( &HQW2*UDP%DODQFH JUFDSDFLW\VHQVLWLYLW\ZLWKGLDOW\SHDGMXVWPHQW

7ULSOH%HDP%DODQFH
*( 7ULSOH%HDP%DODQFH JUFDSDFLW\VHQVLWLYLW\
6XSSOLHGFRPSOHWHZLWKZHLJKWV
*( 'LDO2*UDP%DODQFH JUFDSDFLW\VHQVLWLYLW\ZLWKGLDOW\SHDGMXVWPHQW
6XSSOLHGFRPSOHWHZLWKZHLJKWV

+HDY\'XW\6ROXWLRQ%DODQFH
*( +HDY\'XW\6ROXWLRQ%DODQFH NJFDSDFLW\JUVHQVLWLYLW\
6XSSOLHGFRPSOHWHZLWKZHLJKWV

3ODWIRUP6FDOH
*( 3ODWIRUP6FDOH NJFDSDFLW\JUVHQVLWLYLW\GLDOW\SH

'LJLWDO%DODQFH
*( 'LJLWDO%DODQFH &DSDFLW\  [ JU
*( 'LJLWDO%DODQFH &DSDFLW\  [ JU

2YHQ0HPPHUW
8QLYHUVDORYHQGRXEOHZDOOHGPHWDOVKLHOG
WHPSHUDWXUHUDQJHIURPURRPWHPSHUDWXUHWR&

7\SH 3DUWV1DPH 4W\

*( 'U\LQJ2YHQ OWUFDSDFLW\LQWHUQDOGLPHQVLRQO[Z[K[[PP
*( 'U\LQJ2YHQ OWUFDSDFLW\LQWHUQDOGLPHQVLRQO[Z[K[[PP
*( 'U\LQJ2YHQ OWUFDSDFLW\LQWHUQDOGLPHQVLRQO[Z[K[[PP
*( 'U\LQJ2YHQ OWUFDSDFLW\LQWHUQDOGLPHQVLRQO[Z[K[[PP
*( 'U\LQJ2YHQ OWUFDSDFLW\LQWHUQDOGLPHQVLRQO[Z[K[[PP
*( 'U\LQJ2YHQ OWUFDSDFLW\LQWHUQDOGLPHQVLRQO[Z[K[[PP
*( 'U\LQJ2YHQ OWUFDSDFLW\LQWHUQDOGLPHQVLRQO[Z[K[[PP
*( 'U\LQJ2YHQ OWUFDSDFLW\LQWHUQDOGLPHQVLRQO[Z[K[[PP

™™™Ǥ—Ž–‹„‹ƒǤ…‘ȈŠǤΪ͸ʹʹͳͷ͵ͳͶͳͳʹͷȁͷ͵ͳͶͳͲ͸͵Ȉ•ƒŽ‡•̷—Ž–‹„‹ƒǤ…‘Ǥ‹† 
 *HQHUDO(TXLSPHQW

+\GUDXOLF(OHFWULF3XPS
(OHFWULF9$&:DWW3KDVH
7\SH 3DUWV1DPH 6SHFLILFDWLRQ
*( (OHFWULF3XPS SVLVLQJOHDFWLQJ
*( (OHFWULF3XPS SVLGRXEOHDFWLQJ

+\GUDXOLF+RVH
7\SH 3DUWV1DPH 6SHFLILFDWLRQ
*( +\GUDXOLF+RVH FPOHQJWKSVL
*( +\GUDXOLF+RVH FPOHQJWKSVL
*( +\GUDXOLF+RVH FPOHQJWKSVL

6WRS:DWFK
3UHFLVLRQWLPHUSODVWLFERG\
7\SH 3DUWV1DPH 6SHFLILFDWLRQ
*( 6WRS:DWFK VHFVZHHS[PLQ
*( 6WRS:DWFK VHFVZHHS[PLQ

9HUQLHU&DOLSHU
VWDLQOHVVVWHHOGRXEOHVFDOHIRUPHDVXULQJLQQHUDQGRXWHUGLDPHWHU
7\SH 3DUWV1DPH 6SHFLILFDWLRQ
*( 9HUQLHU&DOLSHU PPFDSDFLW\
*( 9HUQLHU&DOLSHU PPFDSDFLW\
*( 9HUQLHU&DOLSHU PPFDSDFLW\
*( 9HUQLHU&DOLSHU PPFDSDFLW\

/HYHOV*(
)RUFKHFNLQJWKHOHYHORIDQDSSDUDWXVLQVWUXPHQWURXQGW\SH

/HYHOV*(
)RUFKHFNLQJWKHOHYHORIDQDSSDUDWXVLQVWUXPHQWVWUDLJKWW\SH

2SHQDQG:UHQFK
7\SH 3DUWV1DPH 6SHFLILFDWLRQ
*( 2SHQ(QG:UHQFK 0HWULFXQLWSFV
*( 2SHQ(QG:UHQFK ,PSHULDOXQLWSFV

5LQJ6SDQQHU
7\SH 3DUWV1DPH 6SHFLILFDWLRQ
*( 5LQJ6SDQQHU 0HWULFXQLWSFV
*( 5LQJ6SDQQHU ,PSHULDOXQLWSFV

$OOHQ.H\
7\SH 3DUWV1DPH 6SHFLILFDWLRQ
*( $OOHQ.H\ 0HWULFXQLWSFV
*( $OOHQ.H\ ,PSHULDOXQLWSFV

3LSH:UHQFK
7\SH 3DUWV1DPH 6SHFLILFDWLRQ
*( 3LSH:UHQFK OHQJWK
*( 3LSH:UHQFK OHQJWK
*( 3LSH:UHQFK OHQJWK

6WUDS:UHQFK
7\SH 3DUWV1DPH 6SHFLILFDWLRQ
*( 6WUDS:UHQFK FDSDFLW\
*( 6WUDS:UHQFK FDSDFLW\

™™™Ǥ—Ž–‹„‹ƒǤ…‘ȈŠǤΪ͸ʹʹͳͷ͵ͳͶͳͳʹͷȁͷ͵ͳͶͳͲ͸͵Ȉ•ƒŽ‡•̷—Ž–‹„‹ƒǤ…‘Ǥ‹†