Bondstrand™ 2400 Series Product Data

Glassfiber Reinforced Epoxy (GRE) pipe systems for Marine and Offshore services

Uses and Applications

● Ballast water ● Fire water ● Saltwater/seawater

● Cooling water ● Fresh water ● Sanitary/sewage
● Disposal ● Potable water ● Column piping
● Drains ● Produced water ● Vent lines
● Drilling muds ● Cassions

Approvals
ISO/FDIS 14692 is an international standard intended for offshore applications on both fixed and floating topsides facilities. It is used as
guidance for the specification, manufacture, testing and installation of GRE (Glassfiber Reinforced Epoxy) piping systems. The United
Kingdom Offshore Operators Association (UKOOA) Document Suite, issued in 1994, formed the basis of the ISO 14692 standard.

Bondstrand pipe series that are used in the offshore industry are designed in accordance with the above standards and/or type-
approved by major certifying bodies. (A complete list is available, on request).

Materials and Characteristics

Filament wound Glassfiber Reinforced epoxy (GRE) pipe with an integral Taper female x shaved spigot adhesive bonded joint or Key-
Lock integral female x male mechanical joint.

• Laminate meets requirements of API Specification 15LR and ISO 14692,

• Pipe wall design based on hydrostatic design basis (Procedure B) with a 0.5 service factor,
• Maximum operating temperature: 93°C (200°F). Temperatures up to 121°C (250°F) are possible. Please consult NOV Fiber
Glass Systems.
• Pipe sizes: 50 - 1000 mm (2” - 40”),
• Standard pressure rating up to 50 bar (363 psi). Higher pressure ratings are possible. Please consult NOV Fiber Glass
Systems.
• ASTM D-2310 classification: RTRP-11AW for conductive pipe and RTRP-11FW for non-conductive pipe.

Joining Systems

Fittings
Filament wound Glassfiber Reinforced epoxy (GRE) fittings with integral taper female bell ends. A wide range
of fittings is available.

Flanges
Filament wound GRE heavy duty and stub end flanges with integral taper female bell end are available. Stan-
dard flange drilling pattern per ASME B16.5 and B16.47A, Class 150 are available. Other drilling patterns,
such as Class 300, DIN and JIS are available.

For dimensional data and standard configurations for fittings, refer to the respective fitting guides. Optionally,
the system can be suppled conductive (Bondstrand 2400C) or with fireproofing (Bondstrand 2400FP).

Pipe Lengths
From 50 - 150 mm (2”-6”) 9 m random length
From 200 - 1000 mm (8” - 40”) 11.89 m random length

Note: Overall pipe length depends on size, end configuration and production location.
 Total Wall Thickness
Pipe
Pressure Class (bar)
Size
in mm 2410 2416 2420 2425
2 50 2.3 2.3 2.3 2.3
3 80 2.3 2.3 2.3 2.7
4 100 2.3 2.5 2.7 3.3
6 150 2.5 3.4 3.8 4.6
8 200 3.1 4.2 4.8 5.8
10 250 3.5 5.1 5.8 7.2
12 300 3.9 6.0 6.8 8.4
14 350 4.1 6.6 7.4 9.2
16 400 4.5 7.4 8.4 10.5
18 450 4.9 8.1 9.2 11.5
20 500 5.4 8.9 10.1 12.7
24 600 6.3 10.6 12.1 15.1
28 700 7.4 12.6 14.3 17.9
30 750 7.9 13.5 15.3 19.1
32 800 8.4 14.3 16.3 20.4
36 900 9.3 16.1 18.2 22.8
40 1000 10.3 17.8 20.3 24.8

Note: Pipe wall thickness measured according to NOV

Fiber Glass Systems’ procedure.

Single Span Lengths Continuous Span Lengths

Pipe Pipe
Pressure Class (bar) Pressure Class (bar)
Size Size
2410 2416 2420 2425 2410 2416 2420 2425
in mm in mm
m m m m m m m m
2 50 2.8 2.8 2.8 2.8 2 50 4.2 4.2 4.2 4.2
3 80 3.2 3.2 3.2 3.3 3 80 4.8 4.8 4.8 5.0
4 100 3.4 3.5 3.6 3.8 4 100 5.1 5.2 5.4 5.7
6 150 3.9 4.3 4.4 4.6 6 150 5.8 6.4 6.6 6.9
8 200 4.5 4.9 5.0 5.3 8 200 6.7 7.3 7.5 7.9
10 250 4.7 5.4 5.6 6.9 10 250 7.3 8.1 8.4 8.9
12 300 4.9 5.9 6.1 6.5 12 300 7.9 8.9 9.2 9.7
14 350 5.0 6.2 6.4 6.8 14 350 8.2 9.3 9.6 10.1
16 400 5.2 6.6 6.9 7.2 16 400 8.7 9.9 10.3 10.8
18 450 5.4 7.0 7.2 7.6 18 450 9.2 10.4 10.8 11.4
20 500 5.8 7.3 7.6 8.0 20 500 9.7 11.0 11.3 12.0
24 600 6.2 8.1 8.3 8.8 24 600 10.6 12.0 12.4 13.1
28 700 6.7 8.8 9.1 9.6 28 700 11.6 13.2 13.6 14.4
30 750 7.0 9.2 9.4 9.9 30 750 12.0 13.7 14.1 14.9
32 800 7.2 9.4 9.7 10.3 32 800 12.4 14.1 14.6 15.4
36 900 7.6 10.0 10.3 10.9 36 900 13.1 15.0 15.4 16.3
40 1000 8.0 10.6 10.9 11.4 40 1000 13.8 15.8 16.3 17.2

Note: Span lengths are at 21°C (70°F).

2
 Typical Mechanical Properties
Property Units Value 21°C Value 93°C Method
Hydrostatis Design Basis N/mm2 161 124 ASTM D2992, Proc. B
Ultimate Hoop Stress at Weeping N/mm2 280 - ASTM D1599
Circumferential
Hoop Tensile Strength N/mm2 380 - ASTM D2290
Hoop Tensile Modulus N/mm 2
26,500 16,800 ASTM D2290
Poisson’s Ratio Axial/Hoop 0.61 0.79 NOVFGS
Longitudinal
Axial Tensile Strength N/mm2 80 65 ASTM D2105
Axial Tensile Modulus N/mm 2
15500 9,900 ASTM D2105
Poisson’s Ratio/Axial 0.36 0.40 NOV FGS
Axial Bending Strength N/mm2 85
Axial Bending Modulus N/mm2 15,500 9,900 ASTM D2925
Shear Modulus N/mm 2
15,500 9,900 NOV FGS

Typical Physical Properties

Property Units Value Method
Thermal Conductivity Pipe Wall W/m°K 0.33 NOV FGS
Thermal Expansion @ 21°C (70°F) mm/mm°C 18 x 10-6 ASTM696
Thermal Expansion @ 93°C (200°) mm/mm°C 24 x 10 -6
ASTM 696
Flow Coefficient Hazen-Williams - 150 -
Absolute Roughness m 5.3 x 10-6 -
Density kg/m3 1,800 -
Specific Gravity 1.8 ASTM D792
Specific Heat J/kg°K 910 -
Grounding Resistance @ 500 Volt - Pipe Ohm/m <1 x 10-6 ASTM D257
Shielding Capability Volt 100 -

3
Engineering Design & Installation

Specials Consult the following literature for recommendations about design, installation and use of
Bondstrand pipe, fittings and flanges:

Marketing Bulletin Engineering and Design Support Services

Assembly Instructions for Taper/Taper adhesive-bonded joints
Assembly Instructions for Bondstrand Fiberglass Flanges
Bondstrand Corrosion Guide for Fiberglass Pipe and Tubing
Bondstrand Pipe Shaver Overview
Bondstrand Marine Design Manual

Please consult NOV Fiber Glass Systems for the current version of the above literature.

Field testing Bondstrand™ pipe systems are designed for hydrostatic testing with water at 150% of
rated pressure.

Surge pressure The maximum allowable surge pressure is 150% of rated pressure.

National Oilwell Varco has produced this brochure for general information only,
and it is not intended for design purposes. Although every effort has been made to
maintain the accuracy and reliability of its contents, National Oilwell Varco in no way
assumes responsibility for liability for any loss, damage or injury resulting from the use
of information and data herein. All applications for the material described are at the
user’s risk and are the user’s responsibility.
All brands listed are trademarks of National Oilwell Varco.

North America South America Europe Asia Pacific Middle East

17115 San Pedro Avenue Estrada de Acesso à Zona P.O. Box 6, 4190 CA No. 7A, Tuas Avenue 3 P.O. Box 17324
Suite 200 Industrial Portuária de Suape, s/no. Geldermalsen, The Netherlands Jurong, Singapore 639407 Dubai, UAE
San Antonio, TX 78232 USA Recife, PE, Brazil 55.590-000 Phone: +31 345 587 587 Phone: +65 6861 6118 Phone: +971 4881 3566
Phone: +1 210 477 7500 Phone: +55 81 3501 0023

www.fgspipe.com • fgspipe@nov.com

© 2013 National Oilwell Varco. All rights reserved.

MOS2400 May 2013