Precise • Reliable • Easy to Operate
Model 50
Metal Detector
W = Belt Width + 10”
S = Max. Burden H + 4”
H = S + R + 13”
R = 3” to 12”
Description Typical Applications
The Tectron Model 50 is engineered for installation on conveyor belts carrying
®
• Aggregate: Protects Impact Crushers
coal, minerals, aggregates, and other bulk materials. The model 50 can be tuned • Asphalt: Protects Impact Crushers
to ignore conductive or magnetic ores such as magnetite and pyrite, even if they
• Mining: Protects Impact Crushers
are carried by high tension, steel cord belts with rip detection loops, while still
detecting small pieces of tramp metal. The model 50 is available in nearly any • Wood Chip: Protects Hogs and Impact Crushers
belt width, and can be field adjusted to fit most standard conveyor configurations. • Waste Wood: Protects Hogs and Impact Crushers
An adjustable aperture allows the model 50 to be modified for changing plant
demands. The model 50 is also available as a flat-pack under-belt style detector.
Lightweight construction makes it easy to assemble and install without special
tools, or the need to cut the belt, and the field replaceable, microprocessor based
controls are easy to operate and maintain. A self-test circuit activates a fault light
and dry contact to alert the operator if there ever is a problem with the controls,
so you’ll never have to wonder if your detector is operating properly.
www.tectron.net • Toll-free: 1-866-TECTRON (1-866-832-8766)
Specification Sheet / Model 50 / Metal Detector Page 2
Features & Benefits Product Specifications
• Single, Field Replaceable, Microprocessor
based controls: Simple to service & maintain Specifications Values
with interchangeable boards Sensitivity 5% of Aperture height
• 32 digit LED display with bar graph for Electronics Field replaceable Microprocessor based
metal signal indication: Easy to read and
operate Enclosure NEMA 4 (IP65) standard (NEMA 4X, 7, 9 available)
• Self Test circuit with Fault Alarm Interconnecting Cable 25 feet (7.6m) standard
indication: Simplifies troubleshooting by Fiberglass Reinforced Plastic frame with reinforced
automatically diagnosing problem Construction
fiberglass antennas.
• Function, Metal and Fault indication Input Voltage 110/220 VAC, 1ph, 50/60Hz
LEDs: Ensures you always know the status of
your metal detector No Output Load – 35 Watts
Power Required
Max. Output Load – 990 Watts
• EEPROM Stored system parameters:
System settings can be swapped between boards, Direct Output (Metal Detect) – Dry Contact (SPDT)
no need to re-program Rated 250VAC, 3A
• 3-level password protection: Prevents Outputs Timed Output (Metal Detect) – Dry Contact (SPDT)
Rated 250VAC, 3A
unauthorized access to key settings and functions
Fault Output – Dry Contact (SPDT) Rated 250VAC, 3A
• Adjustable Frequency: Frequency adjustment
can eliminate airborne interference from motors, 14° to 120°F (-10° to +50°C) (Extended temperature
Operating Temperature
CB radios, and other external sources ranges available on request)
• Rugged Fiberglass Reinforced Plastic
frame & Antennas: Able to withstand the Product Drawing
harshest environments
Letter Dimensions
• Three year warranty: Ensures long life of
reliable service H S + R + 13” W
• Swing away Transmitter Antenna with R 3” to 12”
optional roughing guard: Reduces the S Max. Burden H + 4”
likelihood of damage from large lumps
and over-burdens W Belt Width + 10”
• Optional RS232 / RS485 serial link to PC All dimensions in inches S
with “Event” logbook & time stamp:
Tracks metal detector performance and allows R
output to a PC for data analysis and archiving
H
Why Tectron Engineering?
Keeping production up and running is essential
to your operation. Equipment damage caused by
tramp metal not only costs you time and money
in replacing damaged equipment, but most
importantly it costs you production time. Tectron
Metal Detectors are designed to protect expensive
crushers, grinders, saws and other downstream
equipment from metallic contaminants while
minimizing false trips. Tectron offers a wide variety
of detectors and sensitivities to choose from so you
can be sure that you’re getting the right detector
for the application, all with a 3 year warranty.
Manufacturing the most reliable metal detectors
for bulk material handling is all we do, and with
over 40 years experience, you can rely on the most Optional
trusted name in the industry. Marking
Device
For More Information
For more information about Metal Detectors, and other Tectron Solutions, visit www.tectron.net
Tectron Engineering Company • 546 South Ellis Road • Jacksonville, FL 32254
Toll-free: 1-866-TECTRON (1-866-832-8766) • Phone: 904-394-0683 • Fax: 904-394-0691
Email: solutions@tectron.net • Web: www.tectron.net
© 2012 Tectron Engineering Co. All rights reserved. Product specifications are subject to change without notice. M50-0812
Tectron® is a registered trademark of Tectron Engineering Company
