Cat ®

420F2/420F2 IT
BACKHOE LOADER

The Cat® 420F2 and 420F2 IT Backhoe Loaders deliver performance, increased fuel efficiency, superior hydraulic system, versatility and an all new
operator station. The 420F2 and 420F2 IT feature the following:
„ Ergonomic Operator Station – Ample legroom inside the cab makes „ Machine Versatility – A broad range of performance matched
rotating the seat simple. The air suspension seat provides comfort Cat Work Tools make the Cat Backhoe Loader the most versatile
to the operator while roading. New backhoe control pods allow for machine on the job site. All Backhoe Loaders have standard thumb
unlimited adjustability. ready sticks. The Integrated Tool Carrier (IT Loader) provides versatility
„ Load Sensing Hydraulics – The Cat Backhoe Loader’s load sensing and allows quick connection to a variety of Cat Work Tools.
piston pump provides full hydraulic lifting and digging forces at „ Dual Lock Coupler – Cat dual lock coupler is available from the factory
any engine speed. Variable flow pump matches hydraulic power with either mechanical or hydraulic operation. The coupler makes work
to work demands. tool changes quick and easy.
„ Machine Performance – The Cat C4.4 ACERT™ engine delivers solid
performance and meets U.S. EPA Tier 4 Final/EU Stage IV emission
standards by utilizing Selective Catalytic Reduction technology with a
diesel oxidation catalyst. The system allows the operator to disconnect
the machine, even while the diesel exhaust fluid is being purged from
the system.

Specifications

Engine Weights*

Engine Model Cat C4.4 ACERT Operating Weight

Gross Power Minimum 7726 kg 17,033 lb
SAE J1995 76 kW 102 hp Maximum (ROPS Capacity) 11 000 kg 24,251 lb
ISO 14396 74 kW 100 hp Cab, ROPS/FOPS 163 kg 359 lb
Rated Net Power @ 2,200 rpm AutoShift Transmission 238 kg 525 lb
SAE J1349 69 kW 93 hp Ride Control 14 kg 31 lb
ISO 9240 70 kW 94 hp Air Conditioning 42 kg 93 lb
EEC 80/1269 70 kW 94 hp Four Wheel Drive 165 kg 364 lb
Net Peak Power @ 1,800 rpm MP Bucket (1.0 m3/1.31 yd3)
SAE J1349 78 kW 105 hp (no forks or teeth) 745 kg 1,642 lb
ISO 9249 79 kW 106 hp Loader, IT with Quick Coupler 317 kg 699 lb
EEC 80/1269 79 kW 106 hp Extendible Stick 305 kg 672 lb
Bore 105 mm 4.13 in Counterweights (Option 1) 115 kg 255 lb
Stroke 127 mm 5 in Counterweights (Option 2) 240 kg 530 lb
Displacement 4.4 L 268 in3 Counterweights (Option 3) 460 kg 1,015 lb
Net Torque Rise @ 1,400 rpm 46% *Specifications shown are for machine equipped with single tilt loader,
Net Peak Torque SAE J1349 436 N·m 322 lbf-ft OROPS, two wheel drive, standard stick, 0.96 m3 (1.25 yd3) general
purpose loader bucket, 610 mm (24 in) standard duty backhoe bucket,
• Engine meets Tier 4 Final/Stage IV emission standards. 240 kg (530 lb) counterweight and full fuel tank.
420F2/420F2 IT Backhoe Loader

Transmission Steering
Power Shuttle Transmission – Standard Type Front Wheel
Forward – 1st
5.4 km/h 3.4 mph Power Steering Hydrostatic
Forward – 2nd
9.0 km/h 5.6 mph Bore 65 mm 2.6 in
Forward – 3rd
21 km/h 13 mph Stroke 120 mm 4.7 in
Forward – 4th
40 km/h 25 mph Rod Diameter 36 mm 1.4 in
Reverse – 1st
5.4 km/h 3.4 mph Axle Oscillation 11°
Reverse – 2nd
9.0 km/h 5.6 mph Turning Circle – 2WD/4WD (inner wheel not braked)
Reverse – 3rd
21 km/h 13 mph Outside, Front Wheels 8.18 m 26'10"

Reverse – 4th
40 km/h 25 mph Outside, Widest Loading Bucket 10.97 m 36'0"

AutoShift AutoShift Transmission

Transmission with Lock-Up Torque Service Refill Capacities
– Optional Converter – Optional Cooling System with Air Conditioning 22.5 L 5.9 gal
Forward – 1st 5.8 km/h 3.6 mph 5.8 km/h 3.6 mph Fuel Tank 160 L 42 gal
Forward – 2nd 9.3 km/h 5.7 mph 9.3 km/h 5.7 mph Diesel Exhaust Fluid 19 L 5.0 gal
Forward – 3rd 12 km/h 7 mph 12 km/h 7 mph Engine Oil with Filter 8.8 L 2.3 gal
Forward – 4th 19 km/h 12 mph 19 km/h 12 mph Transmission – Power Shuttle
Forward – 5th 26 km/h 16 mph 23 km/h 14 mph 2WD 15.0 L 4.0 gal
Forward – 5th LUC — — 25 km/h 15 mph 4WD 15.0 L 4.0 gal
Forward – 6th 40 km/h 25 mph 40 km/h 25 mph Transmission – AutoShift
Forward – 6th LUC — — 40 km/h 25 mph 4WD 19.0 L 5.0 gal
Reverse – 1st 5.8 km/h 3.6 mph 5.8 km/h 3.6 mph Rear Axle 16.5 L 4.4 gal
Reverse – 2nd 12 km/h 7.6 mph 12 km/h 7.6 mph Planetaries 1.7 L 0.4 gal
Reverse – 3rd 28 km/h 17 mph 28 km/h 17 mph Front Axle (4WD) 11.0 L 2.9 gal
Planetaries 0.7 L 0.2 gal
Axle Ratings Hydraulic System 95.0 L 25.1 gal
Front Axle, 2WD Hydraulic Tank 40.0 L 10.6 gal
Static 22 964 kg 50,582 lb
Dynamic 9186 kg 20,233 lb • Requires ultra-low sulfur fuel </= 15 ppm fuel sulfur
Front Axle, 4WD
Static 22 964 kg 50,582 lb Tires
Dynamic 9186 kg 20,233 lb Choices listed as combination of front/rear tires:
Rear Axle • 11L-16 (12 ply) F-3/19.5L-24 (12 ply) R4 ATU
Static 22 964 kg 50,582 lb • 12.5/80-18 (12 ply) 1-3/19.5L-24 (12 ply) ATU
Dynamic 9186 kg 20,233 lb • 12.5/80-18 NHS (12 ply) 1-3/21L-24 (16 ply) R4 ATU
• 340/80R 18/19.5L-24 (12 ply) R4 ATU
Hydraulic System • 340/80R 18/500/70R 24 RT
Type Closed Center
Pump Type Variable Flow, Axial Piston
Pump Capacity @ 2,200 rpm 163 L/min 43 gal/min
System Pressure – Backhoe 25 000 kPa 3,600 psi
System Pressure – Loader 25 000 kPa 3,600 psi

Single Tilt Loader

IT Loader

 420F2/420F2 IT Backhoe Loader

Dimensions
Single Tilt Loader IT Loader with Quick Coupler
0.96 m3 (1.25 yd3) 1.00 m3 (1.31 yd3) 0.96 m3 (1.25 yd3) 1.00 m3 (1.31 yd3)
GP Bucket MP Bucket GP Bucket MP Bucket
1 Overall Length (Loader on Ground) – Standard Stick 7141 mm 23'5" 7059 mm 23'2" 7289 mm 23'11" 7197 mm 23'7"
Overall Length (Loader on Ground) – Extendible Stick 7147 mm 23'5" 7064 mm 23'2" 7295 mm 23'11" 7203 mm 23'8"
Overall Transport Length – Standard Stick 7169 mm 23'6" 7133 mm 23'5" 7282 mm 23'11" 7211 mm 23'8"
Overall Transport Length – Extendible Stick 7175 mm 23'6" 7139 mm 23'5" 7288 mm 23'11" 7217 mm 23'8"
2 Overall Transport Height – Standard Stick 3577 mm 11'9" 3577 mm 11'9" 3577 mm 11'9" 3577 mm 11'9"
Overall Transport Height – Extendible Stick 3631 mm 11'11" 3631 mm 11'11" 3631 mm 11'11" 3631 mm 11'11"
Overall Width 2322 mm 7'7" 2322 mm 7'7" 2322 mm 7'7" 2322 mm 7'7"
3 Height to Top of Cab/Canopy 2819 mm 9'3" 2819 mm 9'3" 2819 mm 9'3" 2819 mm 9'3"
4 Height to Top of Exhaust Stack 2744 mm 9'0" 2744 mm 9'0" 2744 mm 9'0" 2744 mm 9'0"
Height to Loader Hinge Pin (Transport) 381 mm 1'3" 432 mm 1'5" 396 mm 1'4" 386 mm 1'3"
Ground Clearance (minimum) 294 mm 1'0" 294 mm 1'0" 294 mm 1'0" 294 mm 1'0"
5 Rear Axle Centerline to Front Grill 2705 mm 8'10" 2705 mm 8'10" 2705 mm 8'10" 2705 mm 8'10"
Front Wheel Tread Gauge 1895 mm 6'3" 1895 mm 6'3" 1895 mm 6'3" 1895 mm 6'3"
Rear Wheel Tread Gauge 1714 mm 5'7" 1714 mm 5'7" 1714 mm 5'7" 1714 mm 5'7"
6 Wheelbase 2WD/4WD 2200 mm 7'3" 2200 mm 7'3" 2200 mm 7'3" 2200 mm 7'3"
Loader Bucket Dimensions and Performance
Single Tilt Loader IT Loader with Quick Coupler
0.96 m3 (1.25 yd3) 1.00 m3 (1.31 yd3) 0.96 m3 (1.25 yd3) 1.00 m3 (1.31 yd3)
GP Bucket MP Bucket GP Bucket MP Bucket
Capacity (SAE Rated) 0.96 m3 1.25 yd3 1.0 m3 1.31 yd3 0.96 m3 1.25 yd3 1.0 m3 1.31 yd3
Overall Bucket Width 2262 mm 89 in 2279 mm 90 in 2262 mm 89 in 2279 mm 90 in
Lift Capacity at Maximum Height 3283 kg 7,237 lb 3097 kg 6,828 lb 3716 kg 8,193 lb 3448 kg 7,601 lb
Lift Breakout Force 49 809 N 11,197 lbf 49 019 N 11,020 lbf 51 085 N 11,484 lbf 49 678 N 11,168 lbf
Tilt Breakout Force 50 190 N 11,283 lbf 57 555 N 12,938 lbf 46 314 N 10,411 lbf 50 380 N 11,325 lbf
Tipping Load at Breakout Point 6578 kg 14,503 lb 6659 kg 14,681 lb 5951 kg 13,120 lb 6029 kg 13,292 lb
7 Maximum Hinge Pin Height 3474 mm 11'5" 3474 mm 11'5" 3490 mm 11'5" 3490 mm 11'5"
8 Dump Angle at Full Height 44° 44° 44° 44°
Dump Height at Maximum Angle 2746 mm 9'0" 2798 mm 9'2" 2679 mm 8'9" 2745 mm 9'0"
9 Dump Reach at Maximum Angle 808 mm 2'8" 716 mm 2'4" 869 mm 2'10" 814 mm 2'8"
10 Maximum Bucket Rollback at Ground Level 37° 38° 40° 39°
11 Digging Depth 83 mm 3" 110 mm 4" 105 mm 4" 95 mm 4"
Maximum Grading Angle 112° 116° 110° 112°
Width of Dozer Cutting Edge N/A 2262 mm 7'5" N/A 2262 mm 7'5"
12 Grill to Bucket Cutting Edge, Carry Position 1487 mm 4'11" 1451 mm 4'9" 1600 mm 5'3" 1529 mm 5'0"
13 Maximum Operating Height 4355 mm 14'3" 4404 mm 14'5" 4407 mm 14'6" 4480 mm 14'8"
Jaw Opening Maximum N/A 790 mm 2'7" N/A 790 mm 2'7"
Bucket Jaw Clamping Force N/A 55 700 N 12,521 lbf N/A 55 700 N 12,521 lbf
Weight (does not include teeth or forks) 451 kg 994 lb 745 kg 1,642 lb 447 kg 985 lb 724 kg 1,596 lb
Backhoe Dimensions and Performance
Standard Stick E-Stick Retracted E-Stick Extended
14 Digging Depth, SAE (max.) 4360 mm 14'4" 4390 mm 14'5" 5442 mm 17'11"
15 Digging Depth, 610 mm (2 ft) Flat Bottom 4311 mm 14'2" 4351 mm 14'4" 5405 mm 17'9"
Reach from Rear Axle Centerline at Ground Line 6702 mm 22'1" 6737 mm 22'2" 7742 mm 25'6"
16 Reach from Swing Pivot at Ground Line 5612 mm 18'5" 5647 mm 18'7" 6652 mm 21'10"
Maximum Operating Height 5522 mm 18'1" 5546 mm 18'3" 6282 mm 20'8"
Loading Height 3642 mm 11'11" 3599 mm 11'10" 4169 mm 13'8"
17 Loading Reach 1842 mm 6'1" 1929 mm 6'4" 2844 mm 9'4"
Swing Arc 180° 180° 180°
Bucket Rotation 205° 205° 205°
18 Stabilizer Spread, Operating Position (center) 3310 mm 10'10" 3310 mm 10'10" 3310 mm 10'10"
Stabilizer Spread, Operating Position (outside) 3770 mm 12'4" 3770 mm 12'4" 3770 mm 12'4"
Stabilizer Spread, Transport Position 2322 mm 7'7" 2322 mm 7'7" 2322 mm 7'7"
Bucket Dig Force 64 191 N 14,431 lbf 63 290 N 14,228 lbf 63 290 N 14,228 lbf
Stick Dig Force 43 510 N 9,781 lbf 43 402 N 9,757 lbf 31 682 N 7,122 lbf
3
420F2/420F2 IT Backhoe Loader

Backhoe Lift Capacity

Cat 420F2/420F2 IT Standard Stick
Boom Lifting kg lb m ft
1 1621 3,573 6 20
2 1766 3,894 18
1 5 16
3 1785 3,936 2
14
4 1740 3,835 3 16 4
17 12
5 1678 3,700 4 18 3 10
6 1614 3,558 5 19 8
7 1551 3,420 6 20 2 6
8 1492 3,289 7 4
1
9 1437 3,168 8 2
10 1387 3,058 9 0 0
11 1342 2,959 10 –2
–1
–4
12 1304 2,875 11
–2 –6
13 1278 2,817 12
–8
14 1284 2,831 13
–3 –10
15 1426 3,145 14
15 –12
Stick Lifting kg lb –4
–14
16 1831 4,037 –5 –16
17 2557 5,638
m 6 5 4 3 2 1 0 –1
18 2608 5,749
19 2704 5,961 ft 22 20 18 16 14 12 10 8 6 4 2 0 –2
20 3140 6,921

Cat 420F2/420F2 IT Extendible Stick – Retracted

Boom Lifting kg lb m ft
1 1439 3,173 6 20
2 1573 3,468 18
1 5 16
3 1582 3,487 2
14
4 1533 3,380 3 16 4
17 12
5 1470 3,241 4 18 3 10
6 1405 3,097 5 19 8
7 1341 2,957 6 20 2 6
21
8 1281 2,823 7
22 4
1
9 1224 2,699 8 2
10 1172 2,584
9 0 0
11 1124 2,479
10 –2
–1
–4
12 1083 2,387
11
–2 –6
13 1050 2,314
12
–8
14 1040 2,293
13
–3 –10
15 1149 2,534
14
15
10 –12
Stick Lifting kg lb –4
–14
16 1677 3,697 –5 –16
17 2387 5,262
m 6 5 4 3 2 1 0 –1
18 2404 5,301
19 2492 5,493 ft 22 20 18 16 14 12 10 8 6 4 2 0 –2
20 2886 6,362
21 5629 12,409
22 6024 13,281
Lift Capacities are over-end values. Machine equipped with 4WD, OROPS, 0.96 m3 (1.25 yd3) general purpose bucket, and no counterweight.
Extendible stick includes 460 kg (1,015 lb) counterweight.

 420F2/420F2 IT Backhoe Loader

Backhoe Lift Capacity

Cat 420F2/420F2 IT Extendible Stick – Extended
Boom Lifting kg lb m ft
1 838 1,849 6 20
2 1010 2,226 1 18
2 5 16
3 1073 2,366 3 16
14
4 1085 2,392 17 4
4 12
18
5 1070 2,358 5
19 3 10
6 1041 2,296 6 20 8
7 1003 2,212 7 21 2 6
8 976 2,153 8 22
4
23 1
9 950 2,095 9 24 2
10 887 1,955 10 0 0
11 875 1,928 11 –2
–1
12 –4
12 873 1,924
–2 –6
13 895 1,973 13
–8
14 1023 2,255 14
–3 –10
15
15 1502 3,311 –12
Stick Lifting kg lb –4
–14
16 868 1,914 –5 –16
17 1116 2,461
m 6 5 4 3 2 1 0 –1
18 1457 3,212
19 1644 3,624 ft 22 20 18 16 14 12 10 8 6 4 2 0 –2
20 1671 3,684
21 1777 3,918
22 2015 4,442
23 2614 5,762
24 5992 13,209
Lift Capacities are over-end values. Machine equipped with 4WD, OROPS, 0.96 m3 (1.25 yd3) general purpose bucket, and no counterweight.
Extendible stick includes 460 kg (1,015 lb) counterweight.

420F2/420F2 IT Backhoe Loader

Counterweights (Minimum Counterweight Recommendations)

Standard Stick Extendible Stick
Single-Tilt IT Loader w/QC Single-Tilt IT Loader w/QC
Loader Bucket Power Train kg lb kg lb Loader Bucket Power Train kg lb kg lb
GP 4WD 240 530 no counterweight GP 4WD 460 1,015 240 530
MP 4WD no counterweight no counterweight MP 4WD 240 530 no counterweight
Forks 4WD N/A N/A no counterweight Forks 4WD N/A N/A 240 530
Material 4WD N/A N/A no counterweight Material 4WD N/A N/A 240 530
Handling Arm Handling Arm

Backhoe Buckets (With weld on adapters and pin-on teeth)

Standard Duty Coral
Width Rated Capacity Weight No. of Width Rated Capacity Weight No. of
mm in L ft3 kg lb Teeth mm in L ft3 kg lb Teeth
305 12 80 2.8 111 245 3 305 12 60 2.1 134 295 4
457 18 120 4.2 122 268 4 457 18 100 3.5 155 341 6
610 24 180 6.4 141 311 5 610 24 140 4.9 182 402 8
762 30 230 8.1 157 345 5 762 30 190 6.7 210 463 10
914 36 290 10.2 176 388 6
Heavy Duty – Pin Lock
Heavy Duty Width Rated Capacity Weight No. of
Width Rated Capacity Weight No. of mm in L ft3 kg lb Teeth
mm in L ft3 kg lb Teeth 305 12 96 3.4 113 249 3
305 12 80 2.8 121 266 3 406 16 123 4.3 131 288 3
406 16 110 3.9 128 282 3 457 18 139 4.9 139 307 4
457 18 120 4.2 135 299 4 610 24 207 7.3 168 370 5
610 24 180 6.4 151 333 5 762 30 275 9.7 194 428 5
762 30 230 8.1 177 391 5 914 36 345 12.2 224 494 6
914 36 290 10.2 201 443 6
High Capacity – Pin Lock
Soil Excavation Width Rated Capacity Weight No. of
Width Rated Capacity Weight No. of mm in L ft3 kg lb Teeth
mm in L ft3 kg lb Teeth 305 12 96 4.6 113 287 3
457 18 180 6.4 155 341 4 406 16 123 5.6 131 327 3
610 24 240 8.5 182 402 5 457 18 139 6.5 139 346 4
762 30 320 11.3 206 454 5 610 24 207 9.6 168 414 5
914 36 380 13.4 233 513 6 762 30 275 12.9 194 475 5
914 36 345 16.2 224 543 6
Heavy Duty Rock
Width Rated Capacity Weight No. of
mm in L ft 3
kg lb Teeth
305 12 70 2.5 127 279 3
457 18 130 4.6 146 322 4
610 24 200 7.1 174 384 5
762 30 270 9.5 197 434 5
914 36 330 11.7 224 493 6

 420F2/420F2 IT Backhoe Loader

STANDARD EQUIPMENT

„ Adjustable auxiliary controls, backhoe loader „ Flashing hazards/signal lights „ Lights, working (4 front, 4 rear)
„ Air cleaner „ Floor mat „ Loader, self-leveling, return-to-dig and
„ Alarm, back-up „ Fuel tank, fully enclosed transmission disconnect switch
„ Audible system fault alarm „ Fully hinged front grill for cooling package „ Loader, single tilt
„ Automatic Engine Speed Control (AESC) cleaning access „ Mirror, rearview
„ Battery, maintenance-free, 880 CCA „ Gauge cluster: coolant temperature, fuel „ One-touch low idle
„ Battery disconnect switch level, torque converter temperature, DEF level „ Open circuit breather
„ Battery remote jumpstart „ Ground level fuel fill and DEF fill „ Pattern changer, in cab
„ Boom transport lock „ High ambient cooling package „ Power receptacle, 12 volt, 2 internal,
„ Brace, lift cylinder „ Hood lock, inside cab 1 external
„ Brake, secondary parking „ Hydraulic hose, XT™ „ Power steering, hydrostatic
„ Brakes, hydraulically boosted, oil disc, „ Hydraulic oil cooler „ Radio ready cab
dual pedals, interlocking „ Hydraulic oil level sight gauge „ Seat belt, retractable, 51 mm (2 in)
„ Bucket level indicator „ Hydraulic valve, hydrostatic steering „ Socket, two roof
„ Canopy, ROPS/FOPS „ Hydraulic valves, loader 2 function „ Stabilizer shoes, street
„ Cat cushion swing system „ Hydraulic valves, backhoe 5 function „ Steering knob
„ Coat restraint „ Hydraulics, load sensing with variable „ Seat, air suspension, fabric or vinyl cover,
„ Coolant/antifreeze, extended life displacement piston pump with armrest
„ Counterweight, bumper „ Indicator lights: wait to start, water „ Starting system, glow plugs
in fuel, engine warning, warning lamp, „ Steering, hydrostatic
„ Dome light (cab only) emissions module malfunction, low battery/
„ Diagnostic port for engine, machine and „ Storage compartment, lockable
charging system warning, high hydraulic
gauge cluster Electronic Control Modules oil temperature: LCD warnings: engine oil „ Storage tray
„ Differential lock, loader joystick pressure, machine locked, service due, air „ Stop and tail lights
„ Drink holders, two filter blocked, high coolant temperature, „ Swing transport lock
„ Engine, Cat C4.4 ACERT (Direct Injection auto idle shutdown, high torque converter „ Tilt steering wheel
Turbocharged), meets Tier 4 Final/Stage IV temperature, hydraulic filter bypass „ Tires
emission standards, selective catalytic „ Instrument panel lights „ Toolbox, external, lockable
reduction, diesel oxidation catalyst (DOC) „ Joystick controls: pilot operated, excavator- „ Torque converter
„ Engine enclosure, sound suppression style with pattern changer
„ Throttle, hand and foot, electronic
removal panels „ Key start/stop system
„ Transmission, four speed, syncromesh
„ Face seals, O-ring „ LCD screen: engine speed, hour meter,
gear/direction, battery voltage, hydraulic oil „ Transmission neutralizer switch
„ Fan, suction and guard
temperature, torque converter temperature, „ Transport tie-downs
„ Fast reversing shuttle, all gears
coolant temperature, trip totals (fuel and „ Two Wheel Drive
„ Fenders, rear hours), lifetime totals (fuel and hours), operator „ Vandalism locks, four
„ Filters, spin-on: fuel, engine oil, transmission settings (units, brightness, programmable
oil, water separator „ Warning horn, electric
hoe auxiliary flow), service mode diagnostics,
„ Filters, bowl and cartridge: hydraulic fluid maintenance intervals, ECM/system info

420F2/420F2 IT Backhoe Loader

OPTIONAL EQUIPMENT

„ Battery, additional, 880 CCA „ Hydraulic valves, loader with „ Rotating beacon, magnetic mount
„ Cab, deluxe auxiliary roller thumb control „ Seat belt, 75 mm (3 in)
„ Cold weather fuel (–30° C/–22° F) (3rd valve for GP, MP or Quick Coupler) „ Security system keypad
„ Cold weather package, including additional „ Hydraulic valves, backhoe 6 function „ Stabilizer pads, reversible
battery, engine block heater, radiator „ Hydraulic lines, combined function auxiliary „ Stick, extendible
antifreeze, cold weather fuel (–30° C/–22° F) „ Loader, IT with Quick Coupler „ Storage box
and mounting for an ether bottle and pilot loader control
„ Transmission, AutoShift
„ Counterweights, 115 kg (255 lb), 240 kg „ Product Link™, satellite, PL631E
(530 lb) or 460 kg (1,015 lb) „ Transmission, AutoShift with
„ Product Link, cellular, PL641I lock-up torque converter
„ Fenders, front with integral steps „ Quick Coupler, hydraulic, dual lock „ Vandalism protection, gauge cover
„ Four Wheel Drive „ Quick Coupler, manual, dual lock „ Work Tool Attachments such as buckets,
„ Guard, boom protection plate „ Quick Coupler, pin lock forks, material handling arms, augers,
„ Guard, stabilizer, rock „ Radio and CD player hammers, brooms, cold planers and vibratory
„ Radio and CD player, Bluetooth plate compactors. See your Cat dealer for
„ Ride Control more information.

For more complete information on Cat products, dealer services, and industry solutions, visit us on the web at www.cat.com AEHQ7379 (12-14)
© 2014 Caterpillar
All Rights Reserved
Printed in U.S.A.
Materials and specifications are subject to change without notice. Featured machines in photos may include additional
equipment. See your Cat dealer for available options.
CAT, CATERPILLAR, SAFETY.CAT.COM, their respective logos, “Caterpillar Yellow” and the “Power Edge” trade dress, as
well as corporate and product identity used herein, are trademarks of Caterpillar and may not be used without permission.