ONLINE UPS
Master II Series (1P/1P)-Tower
PRO800-QS/QL SERIES 1-10KVA
PROLiNK Master II Series (1P/1P) Tower Type is a new UPS system series with output
power factor 1.0. The UPS design is using true online double-conversion technology
which provides higher charging current and it can be set via LCD display. The system
is designed to provide protection for critical loads such as sensitive networks, small
computer centres, servers, medical equipment, telecom applications as well as
industrial applications. High input power factor correction in the system improves
the efficiency and reduces overall losses.
For 6KVA and 10KVA units, DSP control technology is implemented for the system to
have improve performance and real time harmonic cancellation. UPS is equipped
with 3-stage smart charging design to optimize battery performance. This feature
extends the useful service life of battery and optimizes battery recharge time. External
battery chargers and battery extension assembly are made available for longer
runtime applications.
Users can easily monitor and access to their UPS status from a comprehensive LCD
display. The UPS systems have USB and RS-232 communication ports as standard,
with a built-in intelligent slot for additional adapters, protocol converters and relay
contact cards. SNMP option is also available for power management via SNMP manager
and web browser.
The Master II series (1P/1P) Tower p.f 1.0 Type is available in capacities ranging from
1KVA to 10KVA. For those applications which require longer backup, long run models
with adjustable battery number options are available for 6KVA and 10KVA. Parallel
Redundant configuration (N+X) is available as an option for 6KVA and 10KVA units.
In addition, Emergency Power Off (EPO) function is also available for UPS models and
which is used to protect the personnel and the equipment in case of fire outbreak or
other types of emergency.
• True double-conversion • Low input THDi to reduce power system pollution
• Microprocessor control optimizes reliability* • Adjustable charging current via LCD panel*
• Output power factor 1 • Generator compatible
• Input power factor correction • DSP technology guarantees high performance
• Wide input voltage (110V–300V) • Wide input voltage range (110-300 VAC)
• 50/60Hz Frequency Converter Mode • Active input power factor correction 0.99
• ECO mode energy saving* • SNMP/USB/RS-232 communications
• Emergency power off (EPO) function • Optional N+X parallel redundancy
• Provides over voltage cut-off protection and • Optional OVCD protection
surge immunity by MOV for full time
equipment protection*
*Only available for 1-3KVA models Only available for 6-10KVA models
Local Area Telecommunication Data Electro-Medical Storage Emergency E-Business
Network Devices Centre Device PLCS Alarm (Server Farms,
(LAN) Devices ISP/ASP/POP)
25
ONLINE UPS
Rear Panel
1-3KVA
1. Programmable outlets: connect to non-critical loads 6. RS-232 communication port
2. Output receptacles: connect to mission-critical loads 7. Intelligent slot
3. AC input 8. Emergency power off function connector (EPO)
4. Network/Fax/Modem surge protection 9. External battery connection
5. USB communication port 10. Cooling fan
6 6 6
5 7 5 7 5 7
8 8
8 4 4
4 9 9 9
10
10 10
1
1 1
2
3 2
3 3
2
PRO801-QS/PRO8015-QS PRO802-QS PRO803-QS
6-10KVA
1. RS-232 communication port 8. Maintenance bypass switch
2. USB communication port 9. Input circuit breaker
3. Emergency power off function connector (EPO connector) 10. Output receptacles: connect to mission-critical loads
4. Share current port (only available for parallel configuration) 11. Output circuit breaker for receptacles
5. Parallel port (only available for parallel configuration) 12. Output terminal: connect to mission-critical loads
6. Intelligent slot 13. External battery connector
7. Cooling fan 14. Utility input terminal
1 2 3 4 5 1 2 3 4 5
6 6
7 7
13 13
8 8
9 9
11 11
10 10
12 14 12 14
PRO806-QS/PRO810-QS PRO806-QL/PRO810-QL
26
ONLINE UPS
Full Specifications
MODEL PRO801-QS PRO8015-QS PRO802-QS PRO803-QS
PHASE Single phase with ground
CAPACITY* 1000 VA / 1000 W 1500 VA / 1500W 2000 VA / 2000 W 3000 VA / 3000 W
INPUT
Nominal Voltage 100/110/115/120 /127 VAC or 200/208/220/230/240 VAC
55 - 150 VAC ± 3 % or 110 - 300 VAC ± 3 % at 50% load
Voltage Range
80 - 150 VAC ± 3 % or 160 - 300 VAC ± 3 % at 100% load
Frequency Range 40Hz ~ 70Hz
Power Factor ŝ 0.99 @ nominal voltage (100% load)
THDi% Ŝ5%
OUTPUT
Output Voltage 100*/110*/115*/120 /127 VAC or 200*/208*/220/230/240 VAC
AC Voltage Regulation (Batt. Mode) ± 1%
Frequency Range (Synchronized Range) 47 ~ 53 Hz or 57~63Hz
Frequency Range (Batt. Mode) 50 Hz ± 0.1 Hz or 60Hz ± 0.1 Hz
Current Crest Ratio 3:1
Harmonic Distortion Ŝ2% THD (Linear Load), Ŝ4 % THD (Non-linear Load)
AC to DC Zero
Transfer
Inverter to Bypass 4 ms (Typical)
Time
ECO to Battery Mode 8 ms (Typical), 10 ms (max)
Waveform (Batt. Mode) Pure Sinewave
EFFICIENCY
Line Mode ŝ89% @ battery fully charged ŝ91% @ battery fully charged
ECO Mode ŝ96% @ battery fully charged
Battery Mode ŝ88% ŝ90%
BATTERY
Battery Type 12 V / 9 AH 12 V / 7 AH 12 V / 9 AH 12 V / 9 AH 12 V / 7 AH 12 V / 7 AH 12 V / 9AH 12 V / 7AH
Numbers 2 3 3 4 6 8 6 8
Typical Recharge Time 3 hours recover to 95% capacity for internal battery@ 2A charging current
100/110/115/120 /127 VAC models: default 2A, max. 8A adjustable
Charging Current Default: 2A, Max: 8A adjustable
200/208/220/230/240 VAC models: default 2A, max. 12A adjustable
54.8VDC 82.2VDC 109.6VDC ± 82.2VDC 109.6 VDC
Charging Voltage 27.4VDC ± 1% 41.1VDC ± 1% 41.1VDC ± 1%
± 1% ± 1% 1% ± 1% ± 1%
INDICATORS
LCD Panel Load level, Battery level, AC mode, Battery mode, Bypass mode, and Fault indicator
ALARM
Battery Mode Sounding every 5 seconds
Low Battery Sounding every 2 seconds
Overload Sounding every second
Fault Continuously sounding
PHYSICAL
Dimension, D x W x H (mm) 397 x 145 x 220 421 x 190 x 318
Net Weight (without battery) (kgs) 6.6 6.6 7 9.9 9.9 9.9 12.3 12.3
Net Weight (w/ built-in battery) (kgs) 11.7 13 14.6 20.3 23.2 28.5 28 33
ENVIRONMENT
Humidity 20-95 % RH @ 0- 45°C (non-condensing)
Noise Level Less than 50dBA @ 1 Meter with Fan speed control
MANAGEMENT
Smart RS-232 or USB Supports Windows 2000/2003/XP/Vista/2008, Windows 7/8/10, Linux and MAC
Optional SNMP Power management from SNMP manager and web browser
*Derate capacity to 80% when the output voltage is adjusted to 100VAC/200VAC/208VAC.
27
ONLINE UPS
Full Specifications
MODEL PRO806-QS/QL PRO810-QS/QL
PHASE 1 phase in / 1 phase out
CAPACITY 6000 VA / 6000 W 10000 VA / 10000 W
INPUT
Nominal Voltage 208/220/230/240 VAC
110-300 VAC @ 0 ~60% load
Voltage Range 140-300 VAC @ 60 ~ 80% load
176-300 VAC @ 80 ~ 100% load
Frequency Range 46~54 Hz or 56~64 Hz
Phase Single phase with ground
Power Factor ŝ 0.99 @ full load
THDi <4% @100% Load ; <6% @50% Load
OUTPUT
Output Voltage 208/220/230/240 VAC
AC Voltage Regulation (Batt. Mode) ± 1%
Frequency Range (Synchronized Range) 46~54 Hz or 56~64 Hz
Frequency Range (Batt. Mode) 50 Hz ± 0.1 Hz or 60 Hz ± 0.1 Hz
Current Crest Ratio 3:1 (max.)
Harmonic Distortion Ŝ1 % THD (Linear Load) ; Ŝ 4 % THD (Non-linear Load)
Transfer AC Mode to Batt. Mode Zero
Time Inverter to Bypass Zero
Waveform (Batt. Mode) Pure Sinewave
AC Mode 100%~110% 10min ; 110%~130%: 1min ; >130% : 1sec
Overload
Battery Mode 100%~110%: 30sec ; 110%~130%: 10sec ; >130% : 1sec
EFFICIENCY
AC Mode 94%
Battery Mode 91%
BATTERY
Battery Type 12 V / 7 Ah 12 V / 9 Ah
Numbers 16
Standard
Typical Recharge Time 9 hours recover to 90% capacity
Model
Charging Current (max.) 1.0 A
Charging Voltage 218.4 VDC ± 1%
Battery Type Depending on applications
Long-run Numbers 16-20**
Model Charging Current (max.) 4.0 A
Charging Voltage 218.4 VDC ± 1% (Based on 16 pcs batteries)
INDICATORS
LCD Display UPS status, Load level, Battery level, Input/Output voltage, Discharge timer, and Fault conditions
ALARM
Battery Mode Sounding every 4 seconds
Low Battery Sounding every 2 seconds
Overload Sounding twice every second
Fault Continuously sounding
PHYSICAL
Standard Dimension, D x W x H (mm) 369 x 190 x 688 442 x 190 x 688
Model Net Weight (kgs) 54 66
Long-run Dimension, D x W x H (mm) 369 x 190 x 318 442 x 190 x 318
Model Net Weight (kgs) 13 16
ENVIRONMENT
Operating Humidity 20-95 % RH @ 0- 40°C (Non-condensing)
Noise Level Less than 50dB @1Meter Less than 58dB @1Meter
MANAGEMENT
Smart RS-232/USB Supports Windows® 2000/2003/XP/Vista/2008, Windows® 7/8/10, Linux and MAC
Optional SNMP Power management from SNMP manager and web browser
* Derate capacity to 60% of capacity in CVCF mode and to 90% when the output voltage is adjusted to 208VAC.
**When using batteries from 16-19, the unit will de-rate according to below formula: P=Prating x N/20.
***If the UPS is installed or used in a place where the altitude is above than 1000m, the output power must be derated one percent per 100m.
28
