Address | 50-13, Jayeo-ro, Uichang-gu, Changwon-si, Gyeongsangnam-do, Korea
TEL | +82-55-299-9661 FAX | +82-55-299-9665 HOMEPAGE | www.keumwooeng.com
Published by KEUMWOOENG, October 30, 2015
KEUMWOOENG
Quality is Our Future. Our Future is the World.
The Best Quality
to Raise the Status of Korea
With the goal of becoming a company specialized in the
manufacture of refrigerator parts, KEUMWOOENG does its
best to raise the status of products ‘MADE IN KOREA’ in the
global market.
CONTENTS
About KEUMWOOENG 4
KEUMWOOENG’s Message & History
Production Process & Business Areas
PRODUCT8
SCREW Parts
RECIPROCATING Parts
4 KEUMWOOENG
KEUMWOOENG's MESSAGE
The Growth of KEUMWOOENG : Company History
2000 2004
| July 15 Founded as TEMS Industrial at Changwon | April 1 Name changed to Geobong Tech
Machinery Zone | Development and delivery of HOWDEN type screw
| Start of development for MYCOM type screw compressor compressor parts
parts | Development and delivery of marine start air compressor
| Development and delivery of marine air compressor parts
parts | Export begins for certain refrigerator parts through trade
agent
| October 1 - Business location moved to Masan-ri, Buk-
myeon, Changwon-si
| Development and sales of all MYCOM type multi-cylinder
refrigerator parts
MESSAGE & history 5
QUALITY IS OUR FUTURE As a company specializing in the manufacture of refrigerator parts founded in 2000,
OUR FUTURE IS THE WORLD
we have developed and branded MYCOM, HOWDEN type industrial screw refrigerator
repair parts and MYCOM, HASEGAWA type reciprocating multi-cylinder refrigerator
repair parts under the slogan: “Quality is Our Future; Our Future is the World.”
In the past, most industrial refrigerator parts have been imported and markets were
created based upon imported products. Due to our pioneering domestic manufacture
of refrigerator parts, we are not only conducting sales within the domestic market but
expanding our sales network to export markets.
We are in the process of developing and producing SABORE, DAIKIN, BITZER, GRASSO,
VILTER refrigerator repair parts through systematic and careful planning with a priority
in quality in order to enter into foreign markets and to proactively respond to the rapidly
changing markets both at home and abroad.
With the goal of becoming a company specialized in the manufacture of refrigerator
parts, we will do our best to raise the status of products ‘MADE IN KOREA’ in the global
market. We would like to express our gratitude to our customers who have given us
their undivided support and we wish the best of luck to everyone.
2009 2013 2015
| Business location moved to Wolchon-ri, | April 20 Company name changed to | Developing DAIKIN type multi-cylinder
Buk-myeon, Changwon-si KEUMWOOENG refrigerator parts
| Development and sales of all HASEGAWA | August 14 Obtained venture company | Developing SABORE type multi-cylinder
type multi-cylinder refrigerator parts certification refrigerator parts
| October 1 Business location moved to
Songjeong-ri, Uichang-gu, Changwon-si
6 KEUMWOOENG
PRODUCTION Process
01 02 03 04 05
Selection of Item Design and Creation of Production of Die Production of
to be Developed Material Analysis Blueprint for Material Material
- Request testing to state - Material inspection
certified institution - Organization picture
- Hardness and tensile
strength
*Request testing to state
certified institution
BUSINESS Areas
PRODUCT FORM MODEL
MYCOM TYPE SCREW COMPRESSOR PARTS 125 S/L ~ 400 S/L
HOWDEN TYPE SCREW COMPRESSOR PARTS WRV 163 ~ WRV 321
All parts for A-type and B-type
models (excluding case)
MYCOM TYPE RECIPROCATING COMPRESSOR PARTS All parts for 4WA ~ 62WB models
(excluding case)
SF 62 ~ SFW 62
HASEGAWA TYPE RECIPROCATING COMPRESSOR All parts for VM 3 ~ VZ 8
PARTS (excluding case)
DAKIN MARINE TYPE 2C ~ 6C
SABROE TYPE PISTON COMPRESSOR PARTS SMC 104 ~ TSMC 108
MARINE AIR COMPRESSOR PARTS
Production and delivery of refrigerator parts requested
by other customers
PROCESS & BUSINESS AREAs 7
06 07 08 09 10
Processing Inspection Post-processing Cleaning and Delivery
- CNC turning center - Measurement inspection Packaging
- Machining center - Assembly inspection
- Precision Grinding
- Honing
- Lapping
SALES
Stores of Domestic Industrial Stores of Export Industrial
Refrigerator Parts Refrigerator Parts
As of May 31, 2015 Currently conducting business with
Sold at about 30 local sales agencies 5 trade agents as of May 31, 2015
- Exporting to the Southeast Asia
- Exporting to Europe
- Exporting to North and South America
Quality is not made by chance but
is always the result of intelligent effort.
Product
Introduction
:SCREW
10 KEUMWOOENG
Product_SCREW PARTS
All sorts of GASKET SETS and O-RING
SETS for Single/Two Stage MYCOM type 1. SCREW COMPRESSOR GASKET & O-RING
screw compressors
∷ GASKET SET
A.SINGLE STAGE
125S/L ~320S/L (Including V-type)
B.TWO STAGE
1610C~3225C
∷ O-RING SET
C.SINGLE STAGE
125S/L ~320S/L (Including V-type)
D.TWO STAGE
1610C~3225C
All sorts of MAIN and SIDE BEARING
for MYCOM type screw compressors 2. SCREW COMPRESSOR MYCOM TYPE MAIN &
SIDE BEARING
A.125S/L MAIN & SIDE BEARING
B.160S/L MAIN & SIDE BEARING
C.200S/L MAIN & SIDE BEARING
D.250S/L MAIN & SIDE BEARING
E.320S/L MAIN & SIDE BEARING
Make to Order
F.400S/L MAIN & SIDE BEARING
Make to Order
PRODUCT_SCREW parts 11
3. SCREW COMPRESSOR MYCOM TYPE new and
Old type MECHNICAL SEAL ASSEMBLY
A. MECH’ ASS’Y
125S/L ~ 200S/L (Including BOS TYPE)
B. SEAL RING
125S/L ~ 200S/L (Including BOS TYPE)
C. CARBON INSERT
125S/L ~ 200S/L
D. O1L SEAL
125S/L ~ 200S/L
E. OIL PUMP MECH’ ASS’Y
M50P ~ M100P
4. SCREW COMPRESSOR MYCOM TYPE
BALANCE PISTON & SLEEVE
A. BALANCE PISTON
SINGLE STAGE : 125S/L ~ 320S/L
TWO STAGE : 1610C ~ 3225C
B. BALANCE PISTON SLEEVE
SINGLE STAGE : 125S/L ~ 320S/L
TWO STAGE : 1610C ~ 3225C
12 KEUMWOOENG
Product_SCREW PARTS
5. SCREW COMPRESSOR HOWDEN TYPE INLET &
OUTLET BEARING
A. INLET & OUTLET JOURNAL BEARING
WRV 163~255
WRV 321 - Make to Order
6. SCREW COMPRESSOR OIL PUMP METAL BEARING
M50P ~M100P METAL BEARING
KEUMWOOENG 13
Product
Introduction
:RECIPROCATING
14 KEUMWOOENG
Products_Reciprocating Parts
1. RECIPROCATING COMPRESSOR CRANK SHAFT ASSEMBLE
A. MYCOM TYPE CRANK SHAFT
ASSEMBLE
4A, 6A, 8A TYPE & 4B, 6B, 8B, SF TYPE
B. HASEGAWA TYPE CRANK SHAFT
ASSEMBLE
VZ CRANK SHAFT ASSEMBLE
VM CRANK SHAFT ASSEMBLE
Make to Order
PRODUCT_Reciprocating Parts 15
2. RECIPROCATING COMPRESSOR BEARING
A. MYCOM TYPE MAIN &
THRUST BEARING
A TYPE , B TYPE, SF TYPE, SFX
TYPE, WBH TYPE
B. HASEGAWA TYPE REAR &
FRONT BEARING
VM TYPE , VZ TYPE
3. RECIPROCATING COMPRESSOR MECHNICAL SEAL PART
A. MYCOM TYPE MECHNICAL SEAL
ASSEMBLE
A TYPE , B TYPE, SF TYPE,
WBH TYPE
B. HASEGAWA TYPE MECHNICAL SEAL
ASSEMBLE
VM TYPE , VZ TYPE
16 KEUMWOOENG
Products_Reciprocating Parts
4. RECIPROCATING COMPRESSOR MYCOM &
HASEGAWA TYPE
A. MYCOM TYPE CYLINDER SLEEVE
A. TYPE, B TYPE, SF TYPE, SFX TYPE
B. HASEGAWA TYPE CYLINDER LINER
VM TYPE, VM L TYPE, VZ TYPE,
VZ L TYPE
5.RECIPROCATING COMPRESSOR MYCOM &
HASEGAWA TYPE PISTON outer PART
A. MYCOM TYPE PISTON
A TYPE , B TYPE, SF TYPE
B. HASEGAWA TYPE PISTON
VM TYPE, VZ TYPE
C. PISTON RING SET
MYCOM TYPE - A TYPE , B TYPE
HASEGAWA TYPE — VM TYPE, VZ TYPE
D. PISTON PIN
MYCOM TYPE — A TYPE , B TYPE
HASEGAWA TYPE — VM TYPE, VZ TYPE
PRODUCT_Reciprocating Parts 17
6. RECIPROCATING COMPRESSOR MYCOM &
HASEGAWA TYPE VALVE & PLATE
A. MYCOM TYPE VALVE PLATE
A, B TYPE WA,WB TYPE
B. MYCOM TYPE SUCTION VALVE
A, B TYPE WA, WB TYPE
C. HASEGAWA TYPE OUTER 및
INNER SEAR
VM TYPE, VZ TYPE
7.RECIPROCATING COMPRESSOR CONNECTING
ROD ASSEMBLE
A. MYCOM TYPE CONNECTING ROD
ASSEMBLE
A TYPE , B TYPE
B. HASEGAWA TYPE CONNECTING ROD
ASSEMBLE
VM TYPE, VZ TYPE
18 KEUMWOOENG
Products_Reciprocating Parts
8.RECIPROCATING COMPRESSOR DICHARGE
VALVE ASSEMBLE
A. MYCOM TYPE DICHARGE VALVE
CAGE ASSEMBLE
A,B TYPE WA,WB TYPE SF,SFX TYPE
B. HASEGAWA TYPE DICHARGE
VALVE ASSEMBLE
VM TYPE, VZ TYPE
9.RECIPROCATING COMPRESSOR UNLOAD
A. MYCOM TYPE UNLOAD PISTON
A TYPE, B TYPE
B. HASEGAWA TYPE
UNLOAD CYLINDER ASSEMBLE
(common)
PRODUCT_RECIPRO & DEVELOPMENT PLAN 19
Development Plans of KEUMWOOENG
Type | SABROE Type | BITZER Type | DAIKIN
Model | SMC104~108 SERIES Model | 4V.4P,4H,4G,6G SERIES Model | 2C582SE-F SERIES
Expected Duration of Development | Expected Duration of Development | 2C582LE-CF SERIES
2015. 7 ~ 2016. 2 2015. 9 ~ 2016. 3 4~6C552A-F SERIES
Expected Duration of Development |
2015. 11 ~ 2016. 3
Type | VILTER Type | GRASSO Type | BOCK
Model | VMC 440, VMC 450, Model | RC9, RC11 SERIES Model | FK 40 / 650 SERIES
VMC 450XL SERIES Expected Duration of Development | Expected Duration of Development |
Expected Duration of Development | 2016. 4 ~ 2016. 12 2016. 9 ~ 2017. 3
2016. 1 ~ 2016. 9
