Scribd
Upload
184 views2 pages

Welding Specs for Engineers

This document provides information on clip 21/020 for mounting rails, including: 1) The adjustment range and specifications for 21/020 clip models AN and BN. 2) Instructions for mounting the clip, including required components and welding information. 3) A table selecting the appropriate clip model for different rail types based on the rail's dimensions and weight.

Uploaded by

Tower
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
184 views2 pages

Welding Specs for Engineers

This document provides information on clip 21/020 for mounting rails, including: 1) The adjustment range and specifications for 21/020 clip models AN and BN. 2) Instructions for mounting the clip, including required components and welding information. 3) A table selecting the appropriate clip model for different rail types based on the rail's dimensions and weight.

Uploaded by

Tower
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

CLIP

21/020
Adjustment range

Use 4 mm-thick pad only.

* For mounting on concrete + metallic plate, please contact us.


C Tightening Admissible Est'd
CLIPS max torque side load weight
mm Nm kN kg

21/020/AN 23 0,260
60 20
21/020/BN 27 0,280

N : nose height, not compressed, adapted to the rail type (see table overleaf).

MOUNTING INFORMATION

➀
Full designation Welding information
21/020/AN Lower part material : forged steel
➁ or 21/020/BN
DIN 17.100 - Wst.Nr. 1.0570: St 52.3
Components NFA 35-501 : E 36-3
BS 4360 : 50 C
➀ 1x M12 - DIN 6923 - Cl.8 EURONORM 10.025 : S 355 J 0
➁ 1x 21/020/21/N
3
on the whole periphery
➂ or 21/020/25/N
Electrodes :
➂ 1x TC M12 x 29 - 8.8
DIN 1913 : E 51 55 B10 110
➃ ➃ 1x 21/020/13
AFNOR 81-309 : E 51 5/5 B 110 26 BH
ISO 2560 : E 51 5B 110 26 (H)
ASME IIC SFA 5.1 : E 7018-1

Bolts and nuts are hot


dip galvanized. Anti-corrosion coating : see leaflet "Patented weldable clips".

GANTREX GmbH – Hirzenrott 10 – D 52076 Aachen – Tel. +49 (0)2408 9454-0 – Fax +49 (0) 2408 9454-28
CLIP
21/020

CLIP SELECTION FOR EACH RAIL


Mounting
Weight
F K H with without
kg/m
4 mm pad

A 45 125.0 45.0 55.0 22.10 21/020/BI 21/020/AI


A 55 150.0 55.0 65.0 31.80 21/020/BI 21/020/AI
Vign 30 106.0 56.0 125.5 29.98 21/020/BI 21/020/AI
S 30 108.0 60.3 108.0 30.03 21/020/BH 21/020/AH
S 33 105.0 58.0 134.0 33.47 21/020/BH 21/020/AH
S 34 117.5 61.9 117.5 34.72 21/020/BH 21/020/AH
S 41/10 125.0 67.0 138.0 41.38 21/020/BH 21/020/AH
GX 40 127.0 63.5 127.0 39.80 21/020/BI 21/020/AI
GX 42 131.8 65.1 131.8 42.16 21/020/BH 21/020/AH
JIS 30 (ASCE 60,S 30) 108.0 60.3 108.0 30.03 21/020/BH 21/020/AH
JIS 37 122.2 62.7 122.2 37.20 21/020/BH 21/020/AH
JIS 40 N 122.0 64.0 140.0 40.90 21/020/BI 21/020/AI
AS 22 93.7 50.8 93.7 22.90 21/020/BI 21/020/AI
AS 31 108.0 63.5 117.0 31.51 21/020/BI 21/020/AI

For rail sections other than those listed on this page, please contact us.

We reserve the right to discontinue or change specifications or design at any time without prior notice
and whithout incurring any obligation whatsoever.

GANTREX GmbH
Hirzenrott 10 – D 52076 Aachen • Tel. +49 (0)2408 9454-0 • Fax +49 (0) 2408 9454-28
E-mail : info@de.gantry.com • http//www.gantrex.de

09/2011 Rev. 2

You might also like