CAIRN INDIA LIMITED
(CIN: L11101MH2006PLC163934)
Regd. Office: 101, First Floor, C Wing, Business Square, Andheri Kurla Road, Andheri (E), Mumbai – 400 059
Telephone: +91 22 40902613, Facsimile: +91 22 40902633, Website: www.cairnindia.com
RDG GAS DEVELOPMENT PROJECT
GLOBAL EXPRESSION OF INTEREST (EOI) UNDER INTERNATIONAL COMPETITIVE BIDDING (ICB)
FOR
DESIGN, ENGINEERING, TESTING, SUPPLY, SUPERVISION FOR INSTALLATION AND
COMMISSIONING OF GAS TURBINE GENERATOR PACKAGE
FOR RDG GAS PROCESSING TERMINAL.
PACKAGE – III
Cairn India Ltd. (“CIL”) is the Operator of the onshore hydrocarbon block RJ-ON-90/1 (the “Block”) on behalf of itself and
its Joint Venture (JV) partners Cairn Energy Hydrocarbon Limited (CEHL) and Oil and Natural Gas Corporation Limited
(ONGC), located in Barmer district, in the state of Rajasthan, India. The Block contains a number of major oil and gas
discoveries. Raageshwari Deep Gas (RDG) field is a major gas field, located down south of RJ Block. Gas from RDG field
is currently processed at Raageshwari Gas Terminal (RGT) located approx 80 Km from Mangala Processing Terminal
(MPT).
Operator invites interested experienced Gas Turbine driven power Generator (“GTG”) manufacturers/ Packagers (Indian
and International both) with proven capabilities in design, manufacturing, and testing of integrated GTG packages and
demonstrated HSE performance to express their interest for pre-qualification to participate in International Competitive
Bidding Process for Supply of Gas Turbine driven power Generator package including waste heat recovery system
(WHRS) with circulating Hot Oil.
CIL intends to install GTG packages with WHRS to meet the power requirement of upcoming new Gas Processing plant
at Rajasthan.
The Scope of Work for each GTG package shall include but not limited to:
• Design, Supply, Installation Supervision, Testing, Pre-Commissioning and Commissioning of Gas Turbine
Generator package suitable to deliver power of minimum 6 MW @ alternator terminals.
• Each Gas Turbine package shall be supplied as integrated package with Gas Combustor, Gear Unit, Generator/
Alternator, Air Intake and Exhaust System, Control system, automated valving, machine protection systems and
emission monitoring systems complete with all auxiliary equipment necessary to make it a safe, operable, and
stand-alone unit. GTG package shall also include Waste Heat Recovery system (WHRS) at the outlet of the
Turbine Exhaust Gas for heating of Hot Oil.
Specific Pre-Qualification Criteria (Go/No-Go Criteria):
Technical
a. Interested party should have designed, packaged, tested, supplied, installed and commissioned at least two
similar packages in terms of type of Turbine (Gas Turbine) and Electrical Generator ratings (minimum 6 MW @
alternator terminals) in last 10 years
The 10 year time period mentioned above shall be reckoned from the date of issue of this EoI.
Financial
a. Net Worth: Positive net-worth in each of the immediately preceding two financial years
b. Turnover: Turnover in each of the immediately preceding two financial years should be equal to or more than
the estimated average annual contract value
c. Liquidity Ratio of not less than 0.60 in each of the immediately preceding two financial years
Documents to be furnished in the Proposal for Pre-Qualification
The interested parties are requested, as a minimum, to submit the following documents and details:
1. Letter of interest from interested party on their Letter Head.
2. Detailed contractor information clearly specifying years of experience in supply of similar packages, organization
structure, list of manpower with CVs of key personnel, Plant and machinery list mentioning year of manufacturing,
support agencies and other facilities and resources
3. Details of similar GTG Packages manufactured/ supplied in the last 10 years in the format attached herewith –
Refer Annexure-1.
4. List of current ongoing contracts of similar nature under execution in the format attached herewith – Refer
Annexure-2
5. Interested party should indicate a delivery period (delivery at site) for manufacturing, supply and commissioning of
such GTG packages and should provide details of actual delivery period for such GTG supplied in last ten years.
6. Project Execution & Management / Planning & Scheduling methodology
7. Demonstrate Technical and Managerial resource availability including engineering and procurement capabilities
along with organogram and resource responsibility
8. Demonstrate Fabrication and Testing capacities & capabilities along with list of testing procedures
9. Details of service centers in India / Asia / Far East to extend prompt after sales support
10. Health Safety and Environment (HSE) policies, HSE Safety Manual / Procedures, HSE Organogram in-line with
internationally accepted practices and HSE performance statistics (LTIFR, FAR, MVAFR) for last five (5) years.
11. HSE certification / accreditation / safety award / reward / recognition received & past experience with CIL
12. Quality Manual, Policies and Procedures, Quality organogram in line with internationally accepted practices along
with list of quality trained resources and competency matrix
13. Copies of ISO certifications for ISO 9001, ISO 14001, OHSAS 18001, other statutory certification like DGMS,
ASME U stamp, API etc.
14. Procedures/ Systems for subcontractors & vendors evaluation and appointment
15. Reference to demonstrate knowledge & capability for similar jobs under Indian Statutory and Regulatory
requirements.
16. Details of litigations in last 5 years
17. Financial performance documents (Audited Balance sheets, Profit and Loss statements etc.) for last two (2)
years.
EOI submission shall be complete with the above information.
The interested parties should evince interest to participate in the Expression of Interest by clicking on the “Evince Interest”
link against the corresponding EoI listing on the Cairn India website and submit their contact details online. Further to this,
interested parties would be invited to submit their response via Smart Source (Cairn’s e-Sourcing Platform). The
interested parties would be requested, as a minimum, to submit the above documents and details for prequalification via
Smart Source within twenty one (21) days of date of publication of Expression of Interest.
Annexure-1
GLOBAL EXPRESSION OF INTEREST (EOI) UNDER INTERNATIONAL COMPETITIVE BIDDING (ICB)
FOR
DESIGN, ENGINEERING, TESTING, SUPPLY, SUPERVISION FOR INSTALLATION AND COMMISSIONING OF GAS TURBINE GENERATOR PACKAGE
FOR RDG GAS PROCESSING TERMINAL.
PACKAGE – III.
Details of GTG Package supplied
Completion
Contract Copy BKW @ Supplied Scope Supply -
Contractual Delivery Actual Completion Certificate Gas Turbine
S.No. Project Client Name Award Date Attached Major Scope Alternator GT Site Rating GT ISO with Intergrated
Date Date Attached Make &
(Yes/ No) Terminal (MW) Rating WHRS Package
(Yes/ No) Model
(MW) (Yes/ No) (Yes/ No)
Annexure 2
GLOBAL EXPRESSION OF INTEREST (EOI) UNDER INTERNATIONAL COMPETITIVE BIDDING (ICB)
FOR
DESIGN, ENGINEERING, TESTING, SUPPLY, SUPERVISION FOR INSTALLATION AND COMMISSIONING OF GAS TURBINE GENERATOR PACKAGE
FOR RDG GAS PROCESSING TERMINAL.
PACKAGE – III.
Details of GTG Package - On-Going projects
Contract Copy BKW @ Scope Supply scope -
Contractual Delivery Percentage Expected Gas Turbine
S.No. Project Client Name Award Date Attached Major Scope Alternator GT Site Rating GT ISO includes Intergrated
Date Completion Completion Date Make &
(Yes/ No) Terminal (MW) Rating WHRS Package
Model
(MW) (Yes/ No) (Yes/ No)
