Scribd
Upload
575 views11 pages

Idm Sem 3 Tech Pack

This document provides specifications for a flat front slim fit trouser with a modified French fly, cross pockets in front, and double welt back pockets. It includes details on thread types, measurements, fabric widths, and construction details for making the trouser. Key details are belt extension, fly, pocket styles, hem, thread specifications, and measurement points for waist, seat, inseam, outseam, and other leg dimensions. Diagrams illustrate waistband placement, pocket placement, and other construction elements.

Uploaded by

Ankit Akash
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
575 views11 pages

Idm Sem 3 Tech Pack

This document provides specifications for a flat front slim fit trouser with a modified French fly, cross pockets in front, and double welt back pockets. It includes details on thread types, measurements, fabric widths, and construction details for making the trouser. Key details are belt extension, fly, pocket styles, hem, thread specifications, and measurement points for waist, seat, inseam, outseam, and other leg dimensions. Diagrams illustrate waistband placement, pocket placement, and other construction elements.

Uploaded by

Ankit Akash
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 11

STYLE LINE

FLAT FRONT SLIM FIT OPEN ENDED TROUSER WITH MODIFIED FRENCH FLY, CROSS POCKETS IN FRONT AND DOUBLE WELT BACK PACKET

GARMENT STYLE LINES


Belt extension: Chiselled

Fly: Modified French

Side Pockets: Cross Pocket

Back Pockets: Double Welt Bottom

Hem: Open Ended

THREAD DETAILS (GUTERMANN)


S/N/L/S : 120 TKT (A120 )

O/L : 220 TKT

S/N & D/N Chain: 120 TKT

Blind Stitch: 240 TKT

Bar tack & Button Hole: 70 TKT

ALL THREAD TYPES SHOULD BE USED


GUTERMANN
Measurement chart

1. Waist: Edge to edge, after button fastening with front and back waist band aligned parallel.
2. Seat/Hip: 3 point measurement, X cm from top of the waistband at centre front and side seam, where,
X= Measurement from top of waistband to the lower end of J-stitch bar tack
3. Out seam: From top of the waist band to bottom hem measured at the side seam.
4. Inseam: From crotch to hem along the inseam
5. Thigh Girth: Circumference of the leg, 1 cm below the crotch
6. Knee girth: Circumference of the leg, 36 cm Below the Crotch.
7. Bottom girth: Circumference of the leg at the bottom of the trouser.
8. Front rise: From top of the waist band to crotch along centre front.
9. Back rise: From top of the waist band to crotch along seat seam.
Measurement chart

SR.NO POINTS OF MEASUREMENTS


MEASUREMENT
1 Waist circumference 96cm
2 Waistband height 3.6cm
3 Front rise 24cm
4 Back rise 29cm
5 Inseam 69cm
6 Outseam 90.5cm
7 Hem circumference 39cm
8 Back dart length 6.5cm
9 Welt pocket from cb 4.1cm
10 Welt pocket width 1cm
11 Welt pocket length 13.8cm
12 Fly length 15cm
13 Finished length 92cm
14 Loop length 5cm
15 Loop width 1.9cm
16 Slant pocket length 16.8 cm
17 Knee circumference 43cm
Sr no Description Width cms
1 NON WOVEN REINFORCED FUSIBLEKUFNER 150
2 WAIST BAND FUSING - RUBY MILLS 90
3 BACK PANEL POCKET AREA AND WELT PIECE 150

1
1
3

Waist band 2
CONSTRUCTION DETAILS TROUSER
TROUSER FRONT, BACK, BOTTOM HEM & BELT LOOPS
CONSTRUCTION DETAILS TROUSER
TROUSER INNER FRONT AND BACK
CONSTRUCTION DETAILS TROUSER
CURTAIN PLACEMENT
CONSTRUCTION DETAILS TROUSER
LABEL AND BUTTON PLACEMENT
CONSTRUCTION DETAILS TROUSER
LOOP PLACEMENT
CONSTRUCTION DETAILS TROUSER
PACKAGING DETAILS

You might also like