Commercial and

Industrial Cooling
World-leading natural cooling technology
Why Breezair?

How evaporative air conditioning works

The beauty of evaporative air conditioning is its simplicity.
It’s a process that’s been used throughout history – thousands Hot outside air
of years ago, the Arabs hung wet blankets in the entrances is drawn in by a
to their tents, while the Greeks placed terracotta pots filled with powerful and
water in their doorways. quiet fan
Think about how much cooler it is at the beach on a hot
summer day. Why? Evaporation! Whenever water and hot
air come into contact, the water evaporates, cooling the
surrounding air by several degrees in the process.
Evaporative air conditioning takes advantage of this natural Air passes through
process. Each Breezair cooler contains large cooling pads, water soaked
which are soaked with water. Hot ambient (outside) air is drawn Mini-Cell Chillcel®
through the cooler with a quiet but powerful fan. cooling pads
As the hot air passes through the wet pads, the water absorbs
some of the heat as it evaporates. The beautifully cooled, fresh
air is then delivered into the building.
Water absorbs heat by the
Natural evaporation cools the air, while the pads filter out dust,
natural evaporation process.
pollen and other contaminants. The result: cooler, cleaner,
Cool, fresh air is produced.
fresher air, without using fluorocarbons or potentially toxic
chemicals.

Feel it for yourself!

Breezair evaporative air conditioning:
Why evaporative air conditioning?
Take the natural approach to air conditioning! Seeley Is more energy-efficient – cheaper to run
International’s Breezair range of evaporative air coolers delivers
Delivers cleaner, healthier air
lots of cool, 100% fresh air, at much lower costs
than refrigerated cooling methods. Is easier and cheaper to install
Evaporative air conditioning is fast becoming the only viable Improves productivity through fresh, clean air (less chance
option for cooling large areas. A Breezair system uses of Sick Building Syndrome or other air-borne problems)
up to 80% less energy than a refrigerated air conditioning
system. Doors and windows can be left open, with absolutely Is healthier for the environment – drastically reduced power
no loss of cooling efficiency. use, no harmful emissions and no synthetic refrigerants

Fresh, clean air Is easier to maintain

The delivered air is 100% fresh, with no risk of recirculated

fumes, germs or odours.
Most importantly, as the outside temperature rises,
the more cooling you get inside – the fundamental benefit
of the evaporative process.

Flexible cooling
If you need to cool small areas within a large space,
then evaporative air conditioning gives you the only effective
option – spot cooling. With spot cooling, an envelope of cool,
high velocity air can be directed to a specific area, irrespective
of the surrounding conditions.

2
Breezair evaporative cooling is suitable for a large range of commercial and industrial
applications, such as:
• warehouses • manufacturing plants • agricultural facilities
• repair and maintenance areas • storage areas • farm buildings – dairy,
• sports centres • laundries and dry cleaners poultry and stables.
• institutional facilities • commercial kitchens

In fact, over quarter of a million commercial and industrial installations have been installed worldwide, and the number is continually
growing.

Automotive industry Textile industry Animal facilities

Food industry Warehouses Factories

Shops & Commercial Centres Restaurants Educational facilities

Why Breezair?
For around four decades, Seeley International’s brands have been synonymous with leading-edge technology, innovative design and
superior cooling performance, in addition to outstanding product reliability and ease of maintenance.
Seeley International’s dedication to innovation through the highest standards of research, engineering and manufacture, as well as our
commitment to excellence in customer service, all combine to deliver the best possible cooling systems at the best possible price.
Designed and made in Australia to cope with even the harshest conditions, Breezair features a range of benefits exclusive to Seeley
International: browse this catalogue to discover more about Breezair!

3
TBQ 500 & TBS 580

The Breezair TBQ 500 & TBS 580: optimum efficiency and unsurpassed reliability
Breezair units feature advanced technology and a range of unique and clever design features that
combine to achieve incredible cooling performance.

NEW BREAKTHROUGH
Mini-Cell^ Chillcel® Pad Technology! Dramatic improvement in cooling efficiency
Revolutionary new Mini-Cell structure provides a new development in cooling technology: the new enhanced small cell design, means that
the Breezair range boasts a new cutting edge level of cooling capacity – up to 8% more than before, for the highest efficiency product.
New pad formulation has resulted in having 25% more surface area dramatically improving the cooling efficiency.
The only evaporative cooling pads fully manufactured in Australia to suit the harshest climates, and now, the absolute over-performer!
^Patent pending

NEW! External Air Sensor (optional)

Displays current outside temperature
Intuitively optimises water and energy usage based on outside ambient conditions
Extends the life of your air conditioner by automatically draining the water tank when temperature nears freezing

Axial fan MagIQcoolTM Controller (standard) Advanced touch screen

The better the fan, the more Operate one cooler from an easy to use, MagIQtouchTM Controller
efficient the system. This wall mounted thermostat controller. The (optional)
super powerful fan is designed controller comes with 20 m wiring loom, The technology includes in-built
to maximise performance and that can be extended up to a maximum Installation Wizard, making the per-
minimise noise. length of 100 m. ating process simple. Each cooler comes supplied with
The purpose designed a 20 m wiring loom and it may be extended up to a
fans are inherently maximum length of 40 m (optional), and to operate up
balanced, with aerofoil
MagIQtouchTM BMS Control (optional)
to 135 coolers* from a single MagIQtouch Control-
blades to provide Our coolers are BMS compatible. ler, using optional Link Module and wiring loom - no
energy efficient, high Please contact your local representative special controllersrequired!
pressure performance. for further option details. *Total loom length must be <= 1000 m

Totally enclosed motor AUTOWeatherseal (optional for TBQ 500)

Breezair’s fan motor is fully The AUTOWeatherseal closes
enclosed to international the cooler air discharge outlet
standards and excludes automatically, thus significantly
any moisture ingress from reducing natural air currents
all sources. The advanced from circulating in and out of
design is rigorously tested the building. The result: a more
and completely reliable. comfortable and controlled environment.

WATERManagerTM system
PermatufTM corrosion-proof cabinet
(optional for TBQ 500)
The Breezair cabinet will not corrode or rust.
The Breezair WATERManager ensures
The UV stabilised structural polymer material
optimum machine life with minimum
is the same type used to make acid baths,
maintenance by constantly checking water
battery cases and some space satellite
quality. As the water in the cooler evaporates,
components. Plus, it’s designed to blend
it leaves behind impurities and salts, which
with any property.
then become deposited on the cooling pads
Tornado® water pump and cause the cooling power to fall. The
Non-clogging water The perfect pump for the job! The Tornado WATERManager system senses water quality
distribution system pump is built to last. Designed, manufac- with a probe that sends a signal back to the
Breezair’s non-clogging water distribution tured and tested by Seeley International, the electronic module, which then ejects some
is one of the things that make it unique. Tornado pump epitomizes reliability. It features dirty water and allows fresh water to enter.
The water distributormaximises cooling very safe material choices, an encapsulated
efficiency by supplying acontinuous and motor with overload cut-out, Clean and dry function (optional for TBQ 500)
balanced flow of water across the cooling stainless steel shafts and bearings fully protected The cooler drains automatically when it’s not
pads. This is different to any other brand from water. Plus, it has a clever impact-start in use, preventing algae growth and
of evaporative coolers, which are subject to feature that will overcome any tendency for the pump maintaining a clean cooler.
water flow variations for a number of to become locked up with residue during prolonged
reasons. Breezair’s balanced flow ensures off periods. The strong synchronous motor has con- Digital SmartboxTM / control power module
highest evaporation efficiency and maximum stant speed, independent of voltage fluctuations, and
A state-of-the-art digital electronic control means
cooling. runs very cool.
optimum performance. The Smartbox digital control
module monitors and controls all of the cooler’s
MagIQtouchTM Air Sensor features to provide ultimate comfort conditions,
temperature sensing and water quality supervision
(optional)
– completely safely and reliably.
The MagIQtouch Controller reads the The module also incorporates
temperature and Relative Humidity level diagnostic features and memory
from this remote sensor which can be to aid trouble-shooting and minimise
installed in the area that needs to be downtime. Several user choice
cooled. parameters are available to allow you to
set up your preferred environment.

4
 25 Years 10 Years 1 Year
Corrosion-free Structural Pump, motor
cabinets components & electronic
guarantee guarantee control module
guarantee

Technical Specifications CABINET DETAILS

TBQ 500 TBS 580
Airflow @ 80Pa 9760 m3/h 10010 m3/h
Industry standard
5750 cfm 5890 cfm
Cooling capacity* (kW) 13.3 16.8
Power consumption Watts max 1260 1210
(total) Current max (amp) 6.0
5.7
Power supply Voltage / Phases / Hz 220-240 / 1 / 50 220-240 / 1 / 50
TBQ 500
Controller Type Digital Digital
Fan Type Axial Axial
Dia (mm) 541 541
Motor Type PSC PSC
Speed max (rpm) 1350 1350
Output Watts max 750 950
Auto reset & “one shot” Auto reset & “one shot”
Overload & Fuse
fuse fuse
Enclosure IP54 IP24
Pump Type Centrifugal Centrifugal C

Motor Synchronous Synchronous

B
Rating Watts (input) 25 25
Flow rate (L/min) 21 21 Water
Connection

Voltage / Phases / Hz 230 / 1 / 50 230 / 1 / 50 H

TBS 580

G
A K
Overload Auto reset Auto reset
Water
Drain
F

Enclosure rating IPX4 IPX4

New Cooling Pad Size (mm) 850 x 526 (H) x 90 (4 850 x 526 (H) x 120 E

Mini-Cell Chillcel pads) (4 pads) L Electrical

Entry I

Pad area (m ) 2
1.79 1.79 J

CABINET DETAILS D
K
Water Tank capacity (L) 23 23
Inlet (mm / inches) 12.7 / ½ male BSP 12.7 / ½ male BSP
Drain (mm / inches) 40 / 1½ male BSP 40 / 1½ male BSP
Shipping Dimensions 1150 x 1150 x 902 (H) 1150 x 1150 x 902 (H) Model# A B C D E F G H I* J* K L
incl. pallet (mm)
TBQ 500 835 1150 1150 1080 275 95 82 82 555 555 249 279
Volume (m3) 1.19 1.19
TBS 580 835 1150 1150 1080 275 95 82 82 555 555 249 279
Mass (kg) 66 68
Operating (kg) 89 91 Note: All dimensions are in mm *Dropper dimensions
Connecting duct Length x width (mm) 550 x 550 550 x 550
(raw edged)

*Cooling capacity measured to Australian Standard AS2913-2000, ambient of 38°C

dry bulb & 21°C wet bulb, with room exit temperature of 27.4°C.
FAN CURVES
Cooler Discharge Air Temperature Chart
200
TBQ 500 Ambient Relative Humidity %

TB 10 20 30 40 50 60 70 80 90 TBQ 500 TBS 580

160
10 2.7 3.6 4.5 5.3 6.2 7.0 7.8 8.5 9.3
Static pressure (Pa)
Ambient Dry Bulb Temperature °C

15 6.1 7.3 8.4 9.4 10.4 11.4 12.4 13.3 14.1

20 9.4 10.8 12.2 13.5 14.7 15.8 17.0 18.1 19.0 120

25 12.6 14.3 16.0 17.5 18.9 20.3 21.5 22.8 23.9

30 15.7 17.8 19.7 21.5 23.2 24.7 26.2 27.5 28.8
80
35 18.7 21.2 23.5 25.6 27.4 29.2 30.8 32.3 33.7
40 21.8 24.7 27.3 29.6 31.7 33.7 35.4 37.1 38.6
45 24.7 28.1 31.1 33.7 36.1 38.2 40.1 41.9 43.5 40
50 27.6 31.6 35.0 37.8 40.4 42.7 44.8 46.7 48.4

TBS 580 Ambient Relative Humidity % 0

7000 8000 9000 10000 11000 12000
10 20 30 40 50 60 70 80 90

10 2.3 3.2 4.2 5.1 6.0 6.8 7.6 8.4 9.2 Airflow (m3/h)
Ambient Dry Bulb Temperature °C

15 5.6 6.8 8.0 9.1 10.2 11.2 12.2 13.2 14.1

20 8.8 10.3 11.7 13.1 14.4 15.6 16.8 18.0 19.0
Certified Air Delivery (m3/h)
25 11.9 13.7 15.4 17.0 18.6 20.0 21.3 22.6 23.8 Industry STD
(static pressure Pa)
Rating m3/h @
30 14.8 17.1 19.1 21.0 22.8 24.4 25.9 27.4 28.7
Model# 80Pa Motor W 0 40 80 120 160
35 17.8 20.4 22.8 25.0 27.0 28.8 30.5 32.1 33.6
TBQ 500 9760 750 11160 10550 9760 8680 7420
40 20.7 23.8 26.6 29.0 31.3 33.3 35.2 36.9 38.5
TBS 580 10010 950 11410 10800 10010 9070 7960
45 23.5 27.1 30.3 33.1 35.5 37.8 39.8 41.7 43.4
50 26.3 30.5 34.1 37.1 39.9 42.3 44.5 46.5 48.3

These charts represent approximate air temperatures based on 90% saturation efficiency at sea level.
From tests carried out to Australian Standard 2913.

5
TBSI 580

World’s first high performance inverter axial evaporative cooler

• Extra static pressure
• Outstanding cooling performance & energy efficiency with the powerful SuperStealth axial fan and inverter motor
• Quietest axial evaporative cooler on the market

SuperStealth™ fan Invertair™ inverter motor

SuperStealth axial fan is specifically designed to The Inverter motor is highly efficient throughout the
be more energy efficient and even quieter than operating range, using far less energy than a standard
the standard Stealth fan. fan and motor.

New Venturi MagIQcoolTM Controller (standard) Advanced touch screen

Specifically designed for
Operate one cooler from an easy to use, MagIQtouchTM Controller
mounting the Invertair motor wall mounted thermostat controller. The (optional)
and the SuperStealth fan; it controller comes with 20 m wiring loom, The technology includes in-built
ensures minimum disturbance that can be extended up to a maximum Installation Wizard, making the per-
of air stream. length of 100 m. ating process simple. Each cooler comes supplied with
a 20 m wiring loom and it may be extended up to a
MagIQtouchTM BMS Control (optional) maximum length of 40 m (optional), and to operate up
PermatufTM corrosion-proof cabinet Our coolers are BMS compatible. to 135 coolers* from a single MagIQtouch Control-
The Breezair cabinet will not corrode or rust. Please contact your local representative ler, using optional Link Module and wiring loom - no
The UV stabilised structural polymer material is for further option details. special controllersrequired!
the same type used to make acid baths, battery *Total loom length must be <= 1000 m
cases and some space satellite components.
Plus, it’s designed to blend with any property.
AUTOWeatherseal
NEW BREAKTHROUGH The AUTOWeatherseal closes
Mini-Cell^ Chillcel® Pad Technology! the cooler air discharge outlet
automatically, thus significantly
Dramatic improvement in cooling efficiency reducing natural air currents
Revolutionary new Mini-Cell structure provides from circulating in and out of
a new development in cooling technology. the building. The result: a more
New enhanced small cell design, means that comfortable and controlled environment.
the Breezair range boasts a new cutting edge
level of cooling capacity – up to 13% more than WATERManagerTM system
before! The Breezair WATERManager ensures
optimum machine life with minimum
New pad formulation has resulted in having
25% more surface area dramatically improving
Tornado® water pump maintenance by constantly checking water
The perfect pump for the job! The Tornado quality. As the water in the cooler evaporates,
cooling efficiency. The only evaporative cooling
it leaves behind impurities and salts, which
pads fully manufactured in Australia to suit the pump is built to last. Designed, manufac-
then become deposited on the cooling pads
harshest climates, and now, the absolute over- tured and tested by Seeley International,
and cause the cooling power to fall. The
performer! the Tornado pump epitomizes reliability.
WATERManager system senses water quality
It features very safe material choices, an
^Patent pending with a probe that sends a signal back to the
encapsulated motor with overload cut-out,
electronic module, which then ejects some
stainless steel shafts and bearings fully protected
dirty water and allows fresh water to enter.
from water. Plus, it has a clever impact-start
Non-clogging water distribution system feature that will overcome any tendency for the
Breezair’s non-clogging water distribution pump to become locked up with residue during Clean and dry function
is one of the things that make it unique. prolonged off periods. The strong synchronous The cooler drains automatically when it’s not
The water distributor maximises cooling motor has constant speed, independent of volt- in use, preventing algae growth and
efficiency by supplying a continuous and age fluctuations, and runs very cool. maintaining a clean cooler.
balanced flow of water across the cooling
pads. This is different to any other brand MagIQtouchTM Air Sensor Digital SmartboxTM / control power module
of evaporative coolers, which are subject to
(optional) A state-of-the-art digital electronic control means
water flow variations for a number of optimum performance. The Smartbox digital control
reasons. Breezair’s balanced flow The MagIQtouch Controller reads the
temperature and Relative Humidity level module monitors and controls all of the cooler’s
ensures highest evaporation features to provide ultimate comfort conditions,
efficiency and maximum cooling. from this remote sensor which can be
installed in the area that needs to be temperature sensing and water quality supervision
cooled. – completely safely and reliably.
The module also incorporates
NEW! External Air Sensor diagnostic features and memory
to aid trouble-shooting
(Optional Extra)
and minimise downtime.
• Displays current outside temperature Several user choice
• Intuitively optimises water and energy usage based on parameters are available
outside ambient conditions to allow you to set up your
• Extends the life of your air conditioner by automatically preferred environment.
draining the water tank when temperature nears freezing

6
 25 Years 10 Years 1 Year
Corrosion-free Structural Pump, motor
cabinets components & electronic
guarantee guarantee control module
guarantee

Technical Specifications CABINET DETAILS

TBSI 580
Airflow @ 80Pa 10910 m3/h
Industry standard C
6420 cfm

B
Cooling capacity* kW 18.4
Power consumption Watts max 1500
(total) Current max (amp) 7.0 Water
Connection

Power supply Voltage / Phases / Hz 220-240 / 1 / 50 H

G
K
Controller Type Digital

A
Water
Drain
F
Fan Type Axial

E
Dia (mm) 534
Motor Type Inverter L Electrical
Entry I

Speed max (rpm) 1700 VAR J

D
Output Watts max 950 K

Overload Two “one shot” fuses

Pump Type Centrifugal
Motor Synchronous Model# A B C D E F G H I* J* K L

Rating Watts (input) 25 TBS 580 835 1150 1150 1080 275 95 82 82 555 555 249 279

Flow rate (L/min) 21 Note: All dimensions are in mm

Voltage / Phases / Hz 230 / 1 / 50 *Dropper dimensions
Overload Auto reset
Enclosure rating IPX4
Cooling pad Chillcel 850 x 526 (H) x 120
Size (mm)
(4 pads)
Pad area (m2) 1.79 FAN CURVE
Water Tank capacity (L) 23
Inlet (mm / inches) 12.7 / ½ male BSP 280

Drain (mm / inches) 40 / 1½ male BSP TBSI 580

Shipping Dimensions 1150 x 1150 x 902 (H) 240

including pallet (mm)
Volume (m3) 1.19 200
Mass (kg) 68
Static pressure (Pa)

Operating (kg) 91 160

Connecting duct Length x width (mm) 550 x 550
(raw edged)
120
*Cooling capacity measured to Australian Standard AS2913-2000, ambient
of 38°C dry bulb & 21°C wet bulb, with room exit temperature of 27.4°C.
80

40

Cooler Discharge Air Temperature Chart 0

3000 4000 5000 6000 7000 8000 9000 10000 11000 12000 13000

Airflow (m3/h)
Ambient Relative Humidity %
Certified Air Delivery (m3/h)
10 20 30 40 50 60 70 80 90 Industry STD
(static pressure Pa)
Rating m3/h Motor
10 2.2 3.2 4.2 5.1 5.9 6.8 7.6 8.4 9.2 Model# @ 80Pa W 0 40 80 120 160 200 240 280
Ambient Dry Bulb Temperature °C

15 5.6 6.8 8.0 9.1 10.2 11.2 12.2 13.2 14.1 TBSI 580 10910 950 12240 11660 10910 9860 8820 7700 6160 3600
20 8.8 10.3 11.7 13.1 14.4 15.6 16.8 18.0 19.0
25 11.8 13.7 15.4 17.0 18.6 20.0 21.3 22.6 23.8
30 14.8 17.1 19.1 21.0 22.8 24.4 25.9 27.4 28.7
35 17.7 20.4 22.8 25.0 27.0 28.8 30.5 32.1 33.6
40 20.7 23.7 26.5 29.0 31.2 33.3 35.2 36.9 38.5
45 23.5 27.1 30.3 33.1 35.5 37.8 39.8 41.7 43.4
50 26.3 30.5 34.1 37.1 39.8 42.2 44.5 46.4 48.3

This chart represents approximate air temperatures based on cooling performance at sea
level. From tests carried out to Australian Standard 2913.

7
 SEELEY INTERNATIONAL
Seeley International is Australia’s largest air
conditioning and ducted gas heating manufacturer
and a global leader in developing ingenious,
energy-efficient cooling and heating products.

Our vision is to lead the world in creating climate

control solutions which continue to be highly
innovative, of premium quality and inspirational
in their delivery of energy-efficiency.

But it’s more than just a vision... it’s a way of life!

A commitment to innovation and excellence is at

the heart of all that we do. Our success in delivering
on that commitment has been recognised by our
many awards and our expanding global presence.
Seeley International now exports to well over 120
countries. Not bad for a company that started out
in 1972 in the garage of its founder and Chairman,
Frank Seeley AM FAICD, who was named South
Australian of the Year for 2011!

Seeley International Europe (UK) Seeley International Europe Seeley International

Cat No B002IN0818 REV D

Unit 11 Byron Business Centre (Italy) (France)

Duke Street Loc. Policiano 72/M 320 Avenue Berthelot
Hucknall, Nottingham 52100 Arezzo 69371 Lyon Cedex 08
UK NG15 7THP Italy France
Quality
Phone/Fax +44 (0) 115 963 5630 Phone +39 0575 97189 Phone +33 (0)4727847 80 ISO 9001
Fax +39 (0)575 1949971

Information in this brochure was correct at Email eurosales@seeleyinternational.com Web breezair.in

the time of preparation. E & OE.