Order No.

VES1204001CE

Drum Type Washing Machine

Model No. NA-127VB4
Model No. NA-128VB4
Model No. NA-147VB4
Model No. NA-148VB4
Product Color : White
Destination : Germany, Spain, France, Italy, Belgium,
8., Norway)LQODQG3RUWXJDO3RODQG

TABLE OF CONTENTS
PAGE PAGE
1 Safety Precautions----------------------------------------------- 3 7.1. Autotest----------------------------------------------------- 12
2 Specifications ----------------------------------------------------- 4 8 Service Mode ----------------------------------------------------- 14
2.1. Product Specifications------------------------------------ 4 8.1. Service Autotest ------------------------------------------ 14
2.2. Name Plate-------------------------------------------------- 4 8.2. Failure Codes --------------------------------------------- 15
3 Technical Descriptions ----------------------------------------- 5 9 Troubleshooting Guide --------------------------------------- 16
3.1. Twinjet Information ---------------------------------------- 5 10 Disassembly and Assembly Instructions--------------- 17
4 Location of Controls and Components ------------------- 6 10.1. Torque Values--------------------------------------------- 17
5 Installation Instructions ---------------------------------------- 7 10.2. Top Plate --------------------------------------------------- 18
5.1. Moving and Installing ------------------------------------- 7 10.3. Door --------------------------------------------------------- 18
5.2. Detergent Box Group ------------------------------------- 8 10.4. Spring Wire ------------------------------------------------ 20
6 Operating Instructions------------------------------------------ 9 10.5. Detergent Drawer ---------------------------------------- 20
6.1. LCD Screen, Function Buttons & Knobs ------------ 9 10.6. Control Panel---------------------------------------------- 21
6.2. Program List ------------------------------------------------ 9 10.7. Kick Plate -------------------------------------------------- 22
6.3. Program Details-------------------------------------------10 10.8. Front Panel ------------------------------------------------ 22
6.4. Program Details with Half Load Defection --------- 11 10.9. Upper Support Bracket --------------------------------- 24
6.5. Child Lock -------------------------------------------------- 11 10.10. Detergent Drawer Housing ---------------------------- 24
7 Test Mode ----------------------------------------------------------12 10.11. Power Cable Group and Parasite Filter ------------ 25

© Panasonic Corporation 2012 Unauthorized copy-

ing and distribution is a violation of law.

Downloaded from www.Manualslib.com manuals search engine

 10.12. Electronic Pressure Switch (EPS) ------------------- 26
10.13. Door Lock -------------------------------------------------- 26
10.14. Pump Motor------------------------------------------------ 26
10.15. Front Counterweight------------------------------------- 27
10.16. Heater ------------------------------------------------------- 27
10.17. Twinjet System-------------------------------------------- 28
10.18. Tub Bellows Seal----------------------------------------- 29
10.19. Transport Screw ------------------------------------------ 29
10.20. Upper Counterweight------------------------------------ 30
10.21. Washing Group ------------------------------------------- 30
10.22. Shock Absorber PIN------------------------------------- 31
10.23. Belt----------------------------------------------------------- 31
10.24. Driven Pulley ---------------------------------------------- 31
10.25. Motor -------------------------------------------------------- 31
10.26. Tub Entrance with Bellow Hose ---------------------- 32
10.27. Pressure Switch Hose Group ------------------------- 32
10.28. Tub ----------------------------------------------------------- 32
10.29. Drum--------------------------------------------------------- 32
11 Measurements and Adjustments -------------------------- 33
11.1. Drain Pump ------------------------------------------------ 33
11.2. Circulation Pump ----------------------------------------- 34
11.3. Resistance ------------------------------------------------- 35
11.4. NTC---------------------------------------------------------- 36
11.5. Valve--------------------------------------------------------- 37
11.6. Electronic Pressure Switch (EPS) ------------------- 38
11.7. Motor (For NA-127VB4 and NA-147VB4)---------- 39
11.8. Motor (For NA-128VB4 and NA-148VB4)---------- 40
11.9. Door Lock -------------------------------------------------- 41
12 Dimensions ------------------------------------------------------- 43
13 Wiring Connection Diagram --------------------------------- 44
13.1. Wiring Diagram NA-127VB4 and NA-147VB4 ---- 44
13.2. Wiring Diagram NA-128VB4 and NA-148VB4 ---- 46
14 Exploded View and Replacement Parts List ----------- 48
14.1. Control Panel Parts -------------------------------------- 48
14.2. Front Panel Parts----------------------------------------- 50
14.3. Washing Group Parts ----------------------------------- 51
14.4. Circulation Group Parts--------------------------------- 53
14.5. Detergent Drawer Group Parts ----------------------- 54
14.6. Pressure Switch Hose Group Parts ----------------- 55
14.7. Body Group Parts ---------------------------------------- 56
14.8. Porthole Group Parts------------------------------------ 58
14.9. Accessories------------------------------------------------ 59
14.10. Packaging Group Parts --------------------------------- 61

Downloaded from www.Manualslib.com manuals search engine

 1 Safety Precautions

Downloaded from www.Manualslib.com manuals search engine

 2 Specifications
2.1. Product Specifications

NA-127VB4 NA-128VB4 NA-147VB4 NA-148VB4

Product Type Front Loader Front Loader Front Loader Front Loader
Capacity 7 kg 8 kg 7 kg 8 kg
Max Spin Speed 1200 r/min 1200 r/min 1400 r/min 1400 r/min
Drum Volume 50 L 60 L 50 L 60 L
Energy Label Rating A+++ A+++ A+++ A+++
Energy Consumption 162 kWh/annum 162 kWh/annum 162 kWh/annum 162 kWh/annum
Water Consumption 9240 L/annum 9900 L/annum 9240 L/annum 9900 L/annum
Noise Level Wash 58 dBA 58 dBA 58 dBA 58 dBA
Spin 74 dBA 76 dBA 75 dBA 76 dBA
Control Panel LED display, E-Type LED display, E-Type LED display, E-Type LED display, E-Type
Wash Programs 15 settings 15 settings 15 settings 15 settings
Spin Speed Setting 6 setting 6 setting 6 setting 6 setting
Dimensions Height 85 cm 85 cm 85 cm 85 cm
Width 60 cm 60 cm 60 cm 60 cm
Depth 53 cm 58 cm 53 cm 58 cm
Door Opening Large door opening Large door opening Large door opening Large door opening
Delay Start Yes Yes Yes Yes
Colour White White White White
Water Protection aquastop hose aquastop hose aquastop hose aquastop hose
for Germany only for Germany only for Germany only for Germany only
Other Features Child Lock Child Lock Child Lock Child Lock
Twinjet system Twinjet system Twinjet system Twinjet system
Packaging Shrink package Shrink package Shrink package Shrink package

2.2. Name Plate

Downloaded from www.Manualslib.com manuals search engine

 3 Technical Descriptions
3.1. Twinjet Information
1. Twinjet system is designed to obtain a better washing
performance by directly injecting water with detergent
using a recirculation system and two nozzles connected
to it. With twinjet system, water consumption is
decreased by 30%, energy consumption is decreased by
10% and washing time is decreased by 15%

2. Twinjet system is valid for all programs except spin and

drain mode. The system dos not function during Water
inlet, heating, spinning, drain phases.

3. Even with a large load of 8 kg. the washing machine will

have the minimum energy consumption by the help of
Twinjet system.

4. Washing machines with Twinjet system are very environ-

ment-friendly by having maximum washing performance
with minimum water consumption.

• Washing machines with Twinjet system will let the customer wash longer amount of load in a shorter period of time.

Downloaded from www.Manualslib.com manuals search engine

 4 Location of Controls and Components

Downloaded from www.Manualslib.com manuals search engine

 5 Installation Instructions
5.1. Moving and Installing
5.1.1. Removal of Transportation Screw 5.1.2. Foot Adjustment
1. Transportation screws, which are located at the back side 1. Do not install machine on rugs or similar surfaces.
of the machine, must be removed before running the 2. For machine to work silently and without any vibration, it
machine. should be installed on a flat, non-slippery firm surface.
2. Loosen the screws by turning them anticlockwise with a Any suspended floor must be suitably strengthened.
suitable spanner. 3. You can adjust the level of machine using its feet.
4. First, loosen the plastic adjustment nut away from the
cabinet base.
5. Change the level by adjusting the feet upwards or down-
wards.
6. After level has been reached, tighten the plastic adjust-
ment nut again by rotating it upwards against the base of
the cabinet.
7. Never put cartons, wooden blocks or similar materials
under the machine to balance irregularities of the floor.
3. Pull out the screws and rubber washers.

4. The holes where the transport screws have been

removed should be covered with the plastic transport 5.1.3. Electrical Connection
caps found in the accessories bag. 1. Washing machine requires a 50Hz supply of 220-
240Volts.
2. A special earthed plug has been attached to the supply
cord of washing machine. This plug must be fitted to an
earthed socket. The fuse value fitted to this plug should
be 13 amps. If you have any doubts about electrical sup-
ply, consult a qualified electrician.

THIS APPLIANCE MUST BE EARTHED.

Insert the machine's plug to a grounded socket which
5. The transportation screws that have been removed from you can easily reach.
the machine must be re-used in any future transporting of
the machine.

Downloaded from www.Manualslib.com manuals search engine

 5.1.4. Water Supply Connection 5.2. Detergent Box Group
1. Washing machine is supplied with a single (cold) water
inlet.
2. To prevent leakage from the connection joints, a rubber
washer is included in the hose packing. Fit this washer at
the end of water inlet hose on the tap side.
3. Connect the hose to the water inlet valve. Tighten the
plastic connector by hand. Please call a qualified plumber
if you are unsure about this.
4. Water pressure of 0,1-1 MPa from tap will enable
machine to work more efficiently. (0,1 MPa pressure
means water flow of more than 8 litres in 1 minute from a
fully opened tap)
5. After connection is complete, check for leakage by turning
on tap completely. PREWASH = WATER ENTRY VALVE 1
6. Make sure that water inlet hoses can not become folded, MAIN = WATER ENTRY VALVE 2
damaged, stretched or crushed when the washing SOFTENER = WATER ENTRY VALVE 1 + VALVE 2
machine is in its final position.
7. Mount the water inlet hose to a 3/4 inch threaded water
tap.

5.1.5. Drain Connection

1. Make sure that water inlet hoses are not folded, twisted,
crushed or stretched.
2. The drain hose should be mounted at a minimum height
of 60 cm, and a maximum height of 100 cm from the floor.
3. The end of the drain hose can be connected directly to a
drainage stand-pipe or alternatively to a specific connec-
tion point designed for that purpose on the waste outlet of
a sink unit.
4. Do not extend the drain hose or guarantee will be invali-
dated.

Downloaded from www.Manualslib.com manuals search engine

 6 Operating Instructions
6.1. LCD Screen, Function Buttons & Knobs

PR Program selector 16 programs with ON/OFF.

SW1 Switch 1, Start / Pause
SW2 Switch 2, Temperature Selection
SW3 Switch 3, Delay Time Function
SW4 Switch 4, Extra Rinse
PT PT speed potentiometer
LD1 Switch 1- Start/ Pause Led
LD2 Temperature Function Button Led
LD3 Delay Time Function Button Led
LD4 Extra Rinse Function Button Led
LD5 Spin Phase Led
LD6 Rinse Phase Led
LD7 Wash Phase Led
LD8 Child Lock Activation Led
LD9 Door Lock Led
LD10 Lack Of Water Indication Led
LD11 Pump Failure Indication Led

6.2. Program List

Knob Position Program

Pos1 Cotton
Pos2 Cotton + PW
Pos3 Cotton - Eco
Pos4 Coulors
Pos5 Easy-care
Pos6 Wool
Pos7 Rinse
Pos8 Drain
Pos9 Spin
Pos10 Sportswear
Pos11 Bedding
Pos12 Shirts
Pos13 Rapid 15’
Pos14 Quick
Pos15 15 °C Wash
Pos16 STOP

Downloaded from www.Manualslib.com manuals search engine

 6.3. Program Details
NA-148VB4 NA-128VB4

Programmes Available Program Energy Water

Temperature Duration (min)* (kwh)* Consumption (L)*
Cotton Cold - 90 120 0,92 58
Cotton Eco Cold - 60 200 0,76 48
Cotton PreWash Cold - 90 138 0,98 70
Easy Care Cold - 60 85 0,60 55
Coulors Cold - 40 100 0,91 48
Wool Cold - 40 40 0,10 50
Quick Cold - 60 68 0,48 38
Rapid 15 Cold - 30 15 0,10 30
15 °C Wash WIT 100 0,21 42
Sports Wear Cold - 40 100 0,63 42
Shirts Cold - 60 80 0,60 45
Bedding Cold - 40 65 0,28 57
Rinse WIT 36 0,05 58
Spin - 15 0,08 -
Drain - 3 0,02 -

NA-147VB4 NA-127VB4

Programmes Available Program Energy Water

Temperature Duration (min)* (kwh)* Consumption (L)*
Cotton Cold - 90 120 0,92 60
Cotton Eco Cold - 90 138 0,98 69
Cotton PreWash Cold - 60 200 0,80 45
Easy Care Cold - 60 85 0,61 47
Coulors Cold - 40 100 1,00 52
Wool Cold - 40 40 0,11 45
Quick Cold - 60 68 0,48 38
Rapid 15 Cold - 30 15 0,10 30
15 °C Wash WIT 100 0,22 42
Sports Wear Cold - 40 100 0,62 42
Shirts Cold - 60 80 0,60 44
Bedding Cold - 40 65 0,25 50
Rinse - 36 0,05 58
Spin - 15 0,08 -
Drain - 3 0,02 -

* : Programme duration, Energy and Water Consumption are given for the cycles for programmes are started in set temperature.
WIT: Water Inlet Temperature
- : Programmes do not take water

• Temperature may vary depending on the heating time

• Durations may vary according to wash load (weight and type), tap water and ambient temperature and selected extra functions.

10

Downloaded from www.Manualslib.com manuals search engine

 6.4. Program Details with Half Load Defection
NA-148VB4 NA-128VB4

Full Load / Half Load Programmes Available Program Energy Water

Temperature Duration (min)* (kwh)* Consumption (L)
Full Load Cotton Eco Cold - 60 198 0,72 48
Cotton Eco Cold - 60 200 0,76 48
Half Load HL Cotton Eco Cold - 60 160 0,64 42
HL Cotton Eco Cold - 60 165 0,70 42

NA-147VB4 NA-127VB4

Full Load / Half Load Programmes Available Program Energy Water

Temperature Duration (min)* (kwh)* Consumption (L)
Full Load Cotton Eco Cold - 60 195 0,65 45
Cotton Eco Cold - 60 200 0,78 45
Half Load HL Cotton Eco Cold - 60 160 0,62 42
HL Cotton Eco Cold - 60 165 0,66 42

6.5. Child Lock

Activation
1. Press the fourth function button for 4-5 seconds. 2. The Child Lock Symbol is appeared on the LCD display.

Deactivation
1. Press the fourth function button for 4-5 seconds. 2. The Child Lock Symbol is deleted on the LCD display.

11

Downloaded from www.Manualslib.com manuals search engine

 7 Test Mode
7.1. Autotest
1. After selecting spin speed to max, select the program 3
(Cotton Eco)

2. While pressing Extra Rinse button, change position of the

third to second, and release the Extra Rinse button imme-
diately.

3. Autotest starts.

12

Downloaded from www.Manualslib.com manuals search engine

 13

Downloaded from www.Manualslib.com manuals search engine

 8 Service Mode
8.1. Service Autotest
1. Set program knob at Cotton Eco after selection spin speed to max.
2. While pressing the T °C button, change position of the third to second, and remove the T °C button within 1 second.

During test [SAU] is visualized on display :

LD1 Start / Pause Button LED → ON

LD9 Door Lock LED → ON (in a 30 sec)
Display → [SAU]

Selector Cotton Selector Cotton Prewash Selector Cotton Eco

Result Result Result
HEATER ON PUMP ON TEST PROGRAM ON
Comments : When entering in service test, door Test is over Door will be unlocked,
will be locked. machine will go to ENS state.

The test steps are as below ;

Step 1 : Step 3 :

• Selector Cotton will be [HEATER ON] • Selector Cotton Eco will be 15 minutes test program.

• Before heating it should take water till first level frequency • So, time for selector position 3 is 15 minutes.
then start heating.
• At the end of 15 minutes test program [END] is visualized
• Heater will be on max. 8 minutes after this 8 minutes if the and door is unlocked. During test pressing other buttons
temp. doesn't change more than 2 °C then it will give NTC makes no change.
failure. (E05).
• LD1 Start / Pause button LED → ON
• Or if the NTC connection is broken then it should give again LD9 Door Lock LED → When the door is unlocked it will be
E05 NTC failure. off
Display → [END]
• At the end of heating, [SAU] visualization should make slow
blink to indicate that the step is over.
15 Minutes Test Program
• Note : If user changes the selector position, machine will do
what is defined for the new selected position. • Total water consumption : 30 L (14L Main Wash, 16L Rinse)

• Total duration : 15 min. (8 min Main Wash, 7 min Rinse)

Step 2 :
• Total 53 r/min motor movement : 6.5 min. (4.5 min Main
• Selector Cotton with Prewash will be [PUMP ON] Wash, 2 min Rinse)

• Temperature will be measured, if it is higher than 50 °C, it • Heating : 1,5 min during Main Wash
should take 60 sec. cooling water, and then make [Drain + 5
sec.] • Spinning :
400 r/min (After Main Wash)
• At the end of pump activation, [SAU] visualization should 800 r/min (After Rinse)
make slow blink to indicate that the step is over.
• Number of Rinses : 1

14

Downloaded from www.Manualslib.com manuals search engine

 8.2. Failure Codes

Error Indication Error Number Indication For User Indication For Service
Yes/No Yes/No
Door is not locked E01 Yes Yes
Door is unlocked during programme E01 Yes Yes
Lack of water E02 Yes Yes
Pump failure E03 Yes Yes
Overflow E04 Yes Yes
NTC or Heater Failure E05 No Yes
Motor Failure - 1 (Tachometer open-short circuit or E06 No Yes
motor connector is disconnected)
Motor Failure - 2 (triac short circuit) E08 No Yes
Electronic Pressure Sensor E10 No Yes

15

Downloaded from www.Manualslib.com manuals search engine

 9 Troubleshooting Guide
All repairs which must be done on the machine should be done by authorized agents only. When a repair is required for machine or
you are unable to eliminate the failure with the help of the information given below:

• Unplug the machine.

• Close the water tap.

FAILURE PROBABLE CAUSE METHODS OF ELIMINATION

Machine does not It is unplugged. Insert the plug into the socket.
operate. Fuse is defective. Change fuse.
Start / Pause button has not been pressed. Press the start / pause button.
The program knob is in 0 (off) status. Bring the program knob on the desired status.
The door is not shut properly. Shut the door properly. You should hear the click.
Child lock is active. Refer to 6.5. Child Lock.
Machine does not Water tap is closed. Open water tap.
receive water. The water inlet hose may be bent. Check the water inlet hose.
The water inlet hose is obstructed. Clean the filters of water inlet hose.
The water inlet filter is obstructed. Clean the valve inlet filters.
The door is not shut properly. Shut the door properly. You should hear the click.
Machine is not drain- The drain hose is obstructed or bent. Check the drain hose.
ing water. The pump filter is obstructed. Clean the pump filter.
The clothes are not placed inside the machine in a Spread the clothes inside the machine in an orderly
well-balanced manner. and well-balanced manner.
Machine is vibrating. The feet of machine are not adjusted. Adjust the feet.
Transportation screws are not removed. Remove transportation screws.
There is a small amount of clothes in the device. It does not prevent operation of the machine.
Excessive amount of clothes are filled in the machine Do not exceed the recommended quantity of clothes
or the clothes are not placed in a well-balanced man- and spared clothes in the machine in a well-balanced
ner. manner.
Excessive foam in Too much detergent has been used. Press the start/pause button. In order to stop the
the detergent drawer foam, dilute one table-spoon of softener in half liter of
water and pour it in the detergent drawer. Press the
start/pause button after 5-10 minutes. Arrange the
amount of the detergent properly in the next washing
process.
Wrong detergent has been used. Use only the detergents produced for full automatic
machines.
The washing result is Laundry too dirty for the program you have selected. Select a suitable program.
bad. The amount of detergent used is not sufficient. Use more detergent according to the detergent.
The washing result is Clothes exceeding the maximum capacity has been Put the clothes in machine in a manner not to exceed
not good. filled in machine. its maximum capacity.
Water may be hard. Use the amount of detergent according to the declara-
tion of the detergent producer.
Distribution of the clothes in machine is not well-bal- Spread the clothes inside the machine in an orderly
anced. and well-balanced manner.
The water is seen in No failure. The water is at the lower part of the drum.
the drum during
washing.
There are residues of The pieces of some detergents which do not dissolve By calibrating machine for [Rinsing] program, make
detergent on the in water may stick to clothes as white stains. an additional rinsing or eliminate the stains After dry-
clothes. ing with the help of a brush.
There are grey stains These stains may be caused by oil, cream or oint- In the next washing operation, use the maximum
on the clothes. ment. detergent amount declared by the detergent producer.
The spinning process No failure. The unbalanced load control works in that The unbalanced load control system will try to distrib-
is not done or starts way. ute clothes in a homogenous manner. After clothes
with delay. are distributed, passage to spinning process will be
realized. In the next washing process, place clothes
into the machine in a well-balanced manner.

16

Downloaded from www.Manualslib.com manuals search engine

 10 Disassembly and Assembly Instructions

10.1. Torque Values

ASSEMBLY LOCATION PART NAME SAP CODE TORQUE TORQUE TORQUE

MIN. (Nm) NOM. (Nm) MAX. (Nm)
Parazit Filter - Cabinet Assembly ISO 7049 ST 4.2X9.5 R Underhead Serrated 35001817 2,34 2,60 2,86
Pressure Switch Supporting Plastic - SCREW 4X12 PAN HEAD WITH COLLAR UNDER 37013513 1,44 1,60 1,76
Cabinet Assembly HEAD SERRATED
Hinge - Cabinet Assembly Without SCREW TT M4X8 PAN HEAD CROSS RECESS 35007417 1,40 1,65 1,90
Hing Support Sheet
Speed Control Hole Tapper - Cabinet ISO 7049 ST 4.2X9.5 R Underhead Serrated 35001817 1,50 1,50 1,60
Assembly
Spring Supporting Sheet - Cabinet ISO 7049 ST 4.2X9.5 R Underhead Serrated 35001817 1,98 2,20 2,42
Assembly
Front Panel - Cabinet Assembly ISO 7049 ST 4.2X9.5 R Underhead Serrated 35001817 2,30 2,40 2,80
Front Panel - Plint Assembly ISO 7049 ST 4.8X9.5 R Underhead Serrated 37010108 2,40 3,50 3,70
Middle Support Braket - Cabinet ISO 7049 ST 4.2X9.5 R Underhead Serrated 35001817 2,43 2,70 2,97
Assembly
Control Panel - Front Panel Assembly ISO 7049 ST 4,2x13 TYPE 2 37007273 2,43 2,70 2,97
Door Lock - Cabinet Assembly ISO 7049 ST 4,2x16 35008931 1,10 1,60 1,70
Adjustable Foot M10x1,25 6g 47000778 2,50 2,80 3,10
Top Support Sheet - Cabinet Assembly ISO 7049 ST 4.2X9.5 R Underhead Serrated 35001817 2,43 2,70 2,97
Front Panel Drop Fixing Plastic ISO 7049 ST 4,2x16 35008931 2,50 2,70 2,90
Mechanic Control Panel Program Knob SCREW 3.5X9 PAN HEAD WITH COLLAR 35007387 0,50 1,00 1,00
Supporting Sheet MV1 CROSS RECESS
Mechanic Control Panel Program Knob SCREW 3.5X9 PAN HEAD WITH COLLAR 35007387 0,50 1,00 1,00
Supporting Sheet MV2 CROSS RECESS
Detergent Drawer - Control Panel SCREW 4X14 PAN HEAD TYPE 2 37007242 1,00 1,00 1,20
Assembly
Detergent Drawer - Spring Supporting ISO 7049 ST 4,2x16 35008931 1,44 1,60 1,76
Sheet Assembly
Drum Group Type A COUNTERSUNK HEAD BOLT M6X22 TORX INOX 37000513 13,00 14,00 16,00
Transport Screw Assembly TRANSPORT SCREW GROUP 2 37009655 6,50 6,50 7,00
Motor Assembly COUNTERSUNK HEAD BOLT 8X28 TORX 37007899 6,00 6,50 7,50
Front Concrete Weight - Front Tub HEXAGON HEAD BOLT 10X52 35007415 17,50 18,00 19,00
Assembly
Upper Counter Weight Assembly MUSHROOM HEAD SQUARE NECK BOLT M 37003063 25,00 27,50 30,00
8X65 WITH M8 NUT
Pulley - Drive Shaft - Washing Group COUNTERSUNK HEAD BOLT M 8X29 37005142 39,50 40,00 40,50
Assembly
Drum Wrapper Sheet-Plastic Lifter SCREW 4X14 PAN HEAD INOX 37007086 0,90 1,00 1,10
Assembly
Front Tub - Rear Tub Assembly HEXAGON HEAD BOLT 6x30 PT 37014521 4,50 4,70 5,00
HEXAGON HEAD BOLT 6x30 DELTA PT 37008870 5,00 5,25 5,50
Motor Cover Assembly THREAD ROLLING SCREW M4X12 PAN HEAD 35008716 1,10 1,20 1,30
TORX
Front Tub- Resistance Protection Foil 1 SCREW 3,5X7 PAN HEAD WITH COLAR CROSS 37015637 0,60 0,75 0,90
RE.

17

Downloaded from www.Manualslib.com manuals search engine

 10.2. Top Plate
1. Remove two screws that fix the top-plate at the back.

2. Pull the door up.

2. Push the top-plate back and pull it up.

3. Remove screws that fix the door group.

10.3. Door
1. Remove two screws that fix the door. (by using the T25)

18

Downloaded from www.Manualslib.com manuals search engine

 4. Put the door outside plastic with helping screwdriver as it 7. Remove the door handle as it is shown in the picture.
is shown in the picture.

8. Remove the door handle pin as it is shown in the pictures.

5. Remove the door inside plastic as it is shown in the pic-
ture.

6. Remove six screws that fix the door hinge as it is shown

in the picture.

19

Downloaded from www.Manualslib.com manuals search engine

 10.4. Spring Wire 10.5. Detergent Drawer
1. First remove the spring wire fixing the tub bellows seal by 1. Remove the detergent drawer and pull it up carefully.
using the small size screw driver.
Pull the tub bellows seal as it is shown in the picture.

2. Remove the tub bellows seal-body fixing spring.

20

Downloaded from www.Manualslib.com manuals search engine

 10.6. Control Panel 4. Remove connectors as it is shown in the picture.

1. Remove the screw which fix the control panel to the front
panel.

5. Remove electronic card cover as it is shown in the pic-

tures by using small screw driver.
2. Remove three screws fixing the control panel.

3. Pull the control panel up.

21

Downloaded from www.Manualslib.com manuals search engine

 10.7. Kick Plate 10.8. Front Panel
1. Remove the right part of the kickplate as it is shown in the 1. Remove two screws fixing the front panel at the bottom as
picture. it is shown in the picture by using T25.

2. Remove two screws fixing the kickplate. 2. Remove two screws fixing the door lock as it is shown in
the pictures.

3. Pull the kickplate left and push it down.

22

Downloaded from www.Manualslib.com manuals search engine

 3. Remove the tub bellows seal as it is shown in the pic- 6. Remove twinjet t-elbow fixing front panel at the upper as it
tures. is shown in the picture.

4. Remove two screws fixing front panel at the upper as it is 7. Remove the front panel as it is shown in the pictures.
shown in the picture.

5. Remove twinjet t-elbow screw fixing front panel at the

upper as it is shown in the picture.

23

Downloaded from www.Manualslib.com manuals search engine

 10.9. Upper Support Bracket 10.10. Detergent Drawer Housing
1. Remove two screws fixing the body group at the front as it 1. Remove the tub seal clamp by using the pliers, which is
is shown in the picture. attached to the detergent drawer housing.

2. Remove two screws fixing the body group at the upper as 2. Remove the four connectors that is connected to the feed
it is shown in the picture. valve as it is shown in the picture.

3. Remove detergent drawer group two clips fixing the upper 3. Turn the feed valve counter clockwise slightly to remove.
support bracket as it is shown in the picture.

24

Downloaded from www.Manualslib.com manuals search engine

 4. Remove the detergent drawer housing assembly. 3. Pull the power cable group up as it is shown in the pic-
ture.

4. Remove parasite fitler fixing body group as it is shown in

10.11. Power Cable Group and Para- the picture.
site Filter
1. Remove the five conectors that is connected to the para-
site filter.

2. Remove two screws fixing the parasite filter.

25

Downloaded from www.Manualslib.com manuals search engine

 10.12. Electronic Pressure Switch 10.13. Door Lock
(EPS) 1. Remove the connector that is connected to the door lock.
1. Remove the connector that is connected to the EPS.

2. Pull the EPS upward to remove as it is shown in the pic- 10.14. Pump Motor
ture.
1. Remove pipe clip that fixes the drain hose.

3. Remove the EPS hose handcuffs and EPS hose as it is

2. Remove pipe clip fixing the tub outlet hose.
shown in the picture.

26

Downloaded from www.Manualslib.com manuals search engine

 3. Remove the connector that is connected to the pump 10.15. Front Counterweight
motor.
1. Remove four screws fixing the front counterweight on the
front. (Box wrench size 13 mm)

4. Remove four screws fixing the pump motor.

2. Pull the counterweight back.

5. Remove pipe clip fixing the twinjet hose.

10.16. Heater
1. Remove the four connectors that is connected to the
heater.

27

Downloaded from www.Manualslib.com manuals search engine

 2. Remove one nut fixing the heater slightly (box wrench 2. Remove the two twinjet hoses from the gasket.
size 8 mm)

3. Remove screw fixing the circulation pump (using T20)

3. Hold the heater and pull it out.

4. After lay down the washer on its rear side, and press the
pawl inward.

10.17. Twinjet System

1. Remove pipe clip fixing the twinjet hose.

28

Downloaded from www.Manualslib.com manuals search engine

 5. Remove the circulatin pump. 2. Hold the tub bellows seal and gasket-body fixing spring
together, and pull them up.

6. Remove the connector that is connected to the circulation

pump.

10.19. Transport Screw

1. Remove four transport screws. (box wrench size 10 mm)

10.18. Tub Bellows Seal

1. Remove the tub gasket clip by using small screwdriver. 2. Hold the transport screw and pull it out.

29

Downloaded from www.Manualslib.com manuals search engine

 10.20. Upper Counterweight 2. Cut the five lead wire holders as shown the pictures.

1. Remove two screws fixing the upper counterweight by

using box wrench size 13 mm.

2. Remove the upper counterweight. 3. Remove the four screws fixing the spring hanger sheet
iron.

4. Remove the washing group as it is shown in the picture.

10.21. Washing Group
1. Remove the connector that is connected to the motor.

30

Downloaded from www.Manualslib.com manuals search engine

 10.22. Shock Absorber PIN 2. Remove the driven pulley it is shown the picture.

1. Remove two pins fixing the shock absorber as shown in

the picture.

10.25. Motor
1. Remove the four screws fastening the motor under the
10.23. Belt tub by using T40.

1. Remove the belt as it is shown the picture.

2. Pull the motor up for disassembly.

10.24. Driven Pulley

1. Remove the screw fixing driven pulley it is shown the pic-
ture (By using T40).

31

Downloaded from www.Manualslib.com manuals search engine

 10.26. Tub Entrance with Bellow Hose 10.28. Tub
1. Remove the tub entrance with bellow hose. 1. Remove twenty four screws fixing tub using box wrench
size 8 mm.

10.27. Pressure Switch Hose Group

1. Remove screw fixing the pressure switch water reservoir.

10.29. Drum
2. Remove the tub exit with bellow hose with ball by using 1. Remove the drum.
box wrench size 10 mm.

32

Downloaded from www.Manualslib.com manuals search engine

 11 Measurements and Adjustments
11.1. Drain Pump
Drain pump is both a mechanical and elektrical component
which is used to drain water inside the washing machine. It has
an synchronous motor inside. For better performance main-
tanance, pump filter should be cleaned regularly.

11.1.3. Component Controlling By Con-

nection Measurement

11.1.1. Technical Features

Nominal voltage 220 - 240 V

Nominal current 0.28 A (±10 %)
Nominal power 37 W
Frequency 50 Hz
Resistor (coil) 136 Ω (±5 %)
Water flow: 17 L/min (to 1 m height)
Thermal protector YES

11.1.2. Checking of Component

Check the resistance value on the component with multimeter
You can determine the ohm value by measuring from the blue
as shown in belows figures.
cable at 2nd and blue cable at 11th position in the large socket
(refer to 13 Wiring Connection Diagram) as shown in belows
Resistance value should be between 131 - 141 Ω.
figures.
Resistance value should be between 131 - 141 Ω.

Checking the component

33

Downloaded from www.Manualslib.com manuals search engine

 11.2. Circulation Pump
The component is used for circulation of water inside the drum
in order to increase washing performance.

11.2.3. Component Controlling By Con-

nection Measurement

11.2.1. Technical Features

Nominal voltage 220 - 240 V

Frequency 50 Hz
Resistor (coil) 169,5 Ω (±5 %)

11.2.2. Checking of Component

Check the resistance value on the component with multimeter
as shown.

Resistance value should be between 160 - 180 Ω.

You can determine the ohm value by measuring from the red
cable at 5th and red cable at 12th position in the small socket
(refer to 13 Wiring Connection Diagram) as shown in belows
figures.
Resistance value should be between 160 - 180 Ω.

Checking the component

34

Downloaded from www.Manualslib.com manuals search engine

 11.3. Resistance
Heating element (Resistance) is a component which is des-
ingned to regulate temperature of water inside the drum. It has
three connections: Phase, notral and ground connections.

11.3.3. Component Controlling By Con-

nection Measurement

11.3.1. Technical Features

Kind of heating Tubular heating element with NTC - sensor

Nominal voltage 230 V
Nominal power 2000 W (±5 %)
Resistance 24,8 ±5% Ω (for NA-127VB4 and NA-147VB4)
25,2 ±5% Ω (for NA-128VB4 and NA-148VB4)
Thermal fuse 2 - sided

11.3.2. Checking of Component

Check the resistance value on the component with multimeter
as shown in below pictures.
You can determine the ohm value by measuring from the grey
cable at 13th and brown cable at 4th position in the small
socket (refer to 13 Wiring Connection Diagram) as shown in
belows figures.
Resistance value should be between 23 - 27 Ohm.

Checking the component

35

Downloaded from www.Manualslib.com manuals search engine

 11.4. NTC 11.4.2. Checking of Component
Component which sends signals to PCB about the water tem- Check the resistance value on the component with multimeter
perature inside the tub. as shown in below pictures.

The Resistance (Ohm) value of the NTC decreases as the tem-

perature increases.

11.4.1. Technical Features Checking the component

NTC Tempure - Resistance Values
Tem (°C) R min (kΩ) R max (kΩ)
-10 54,9 62,6
-5 43,0 48,6
0 33,9 38,1
5 27,0 30,1
10 21,6 23,9
15 17,4 19,1
20 14,1 15,4
25 11,5 12,5
30 9,4 10,2
35 7,8 8,3
40 6,4 6,9
45 5,4 5,7
50 4,5 4,7
55 3,8 3,9
60 3,2 3,3
65 2,7 2,8
70 2,3 2,4
11.4.3. Component Controlling By Con-
75 1,9 2,0
80 1,7 1,8 nection Measurement
85 1,4 1,5
90 1,2 1,3
95 1,1 1,1
100 0,9 1,0

You can determine the ohm value by measuring from the black
cable at 3rd and black cable at 11th position in the small socket
(refer to 13 Wiring Connection Diagram) as shown in belows
figures.
NTC resistance value varies depending on temperature.

36

Downloaded from www.Manualslib.com manuals search engine

 11.5. Valve
Valve is an electrical and mechanical component which is
designed to take water from the network system into the wash-
ine machine. It is operated by PCB card.

11.5.3. Component Controlling By Con-

nection Measurement
11.5.1. Technical Features

Nominal voltage 220 - 240 V

Nominal power 8 VA
Frequency 50-60 Hz
Rated flow: 7 L/min (±15 %)
Operating water 0.03 - 1 Mpa
pressure

11.5.2. Checking of Component

Check the resistance value on the component with multimeter
as shown in below pictures.

Valve water flow rate should be between 6 L/min - 8 L/min.

You can determine the ohm value of the main wash valve by
Each valve bobbin resistance values should be between 3,3 - measuring from the blue cable at 5th and white cable at 15th
4.2 kohm. position or the pre-wash valve by measuring from the black
cable at 14th and white cable at 15th position in the large
socket (refer to 13 Wiring Connection Diagram) as shown in
belows figures.
Each valve bobbin resistance values should be between 3,3 -
4.2 kohm.

Checking the component

37

Downloaded from www.Manualslib.com manuals search engine

 11.6. Electronic Pressure Switch (EPS)

11.6.1. Technical Features

Electromagnetic field occurs as a result of the vibration of the membrane which is under pressure in the coil. The nucleus part is
moved up and down by the electromagnetic field. The water level is regulated by the frequency which is controlled by the PCB and
changes according to the movement of the nucleus part.

11.6.2. Checking of Component

1. Push the door lock slider with screwdriver. 3. Cut off the energy input when the water intake finishes
and drum begins to rotate.

2. Select the 1st program and start the machine.

4. Check the water level inside the drum with ruler. It should
be 10 cm ±1.

38

Downloaded from www.Manualslib.com manuals search engine

 11.7. Motor (For NA-127VB4 and NA-147VB4)
The washing machine has an asynchronous motor. It is controlled by the PCB.

It is essential to check the motor for correct diagnosis and quick servicing. In the below picture, socket points on the motor is shown
to measure with multimeter.

Motor Socket Terminals

Tacho and stator (full field-half field) ohm resistance values for the motor types are listed in the below table.

Resistance values for the motor types

MOTOR CODE SUPPLIER STATOR (FULL FIELD) (ohm) TACHO (ohm) TEMPERATURE
32013066 ANAIMEP 1.2 Ω ±0,08 180 ±20 20 °C - 25 °C

11.7.1. Resistance Controlling By Connec- 11.7.2. Resistance Controlling By Connec-

tion Measurement (Tacho) tion Measurement (Stator)

You can determine the ohm value by measuring from the pink You can determine the ohm value by measuring from the brown
cable at 16th and red cable at 6th position in the large socket cable at 8th and black cable at 18th position in the large socket
(refer to 13 Wiring Connection Diagram) as shown in belows (refer to 13 Wiring Connection Diagram) as shown in belows
figures. For resistance values, refer to the table. figures. For resistance values, refer to the table.

39

Downloaded from www.Manualslib.com manuals search engine

 11.8. Motor (For NA-128VB4 and NA-148VB4)
The washing machine has an asynchronous motor. It is controlled by the PCB.

It is essential to check the motor for correct diagnosis and quick servicing. In the below picture, socket points on the motor is shown
to measure with multimeter.

Tacho and stator (full field-half field) ohm resistance values for the motor types are listed in the below table.

Resistance values for the motor types

MOTOR CODE SUPPLIER STATOR (FULL FIELD) (ohm) TACHO (ohm) TEMPERATURE
32006966 ACC 2,7 ±0,2 184 ±13 20 °C - 25 °C

11.8.1. Resistance Controlling By Connec- 11.8.2. Resistance Controlling By Connec-

tion Measurement (Tacho) tion Measurement (Stator)

You can determine the ohm value by measuring from the pink You can determine the ohm value by measuring from the brown
cable at 16th and red cable at 6th position in the large socket cable at 8th and black cable at 18th position in the large socket
(refer to 13 Wiring Connection Diagram) as shown in belows (refer to 13 Wiring Connection Diagram) as shown in belows
figures. For resistance values, refer to the table. figures. For resistance values, refer to the table.

40

Downloaded from www.Manualslib.com manuals search engine

 11.9. Door Lock 11.9.2. Checking of Component
Door lock is activated at the beginning of the program in order Check the resistance value on the component with multi-meter
to prevent the door from opening. Locking is generated by sup- as shown in below figures.
plying power to PTC-bimetal, after max 6sec (220V), the Resistance value on the (PTC overload + solenoid) should be
bimetal will be warm and ready to close the contacts. Thus the 240Ω ±20% at 25 °C. That resistance value can be measured
first impulse to the solenoid will allow the contact to close and from terminal 3-4 (refer to 13 Wiring Connection Diagram).
consequently the slider will be locked by the pin of the slider-
lock. The second impulse causes no electrical and mechanical
modifications. It can be unlocked by the third impulse; the con-
tact is opened even if the PTC-bimetal remains energized.

Emergency Opening System (PTC-Bimetal) In Case of Lack

of Electric Energy

• In case of lack of electric energy during a washing cycle, the

PTC-bimetal assembly will cool down and after minimum 60
sec (considering previous power supply of 30 sec min and
T=20 °C) the door will be unlocked and thus can be opened.
• In case the door is closed when current comes back, the
PTC-bimetal assembly will heat again, the slider-lock will
lock, the contact will close and the program will continue
from where it stopped.

11.9.1. Technical Features

Nominal voltage 250 V

41

Downloaded from www.Manualslib.com manuals search engine

 11.9.3. Component Controlling By Con-
nection Measurement

This socket shows the connection between terminal 3-4 (See

wiring diagram (***) above). The resistance read from terminal
3-4 is the resistance of PTC overload plus resistance of sole-
noid.

42

Downloaded from www.Manualslib.com manuals search engine

 12 Dimensions

43

Downloaded from www.Manualslib.com manuals search engine

 13 Wiring Connection Diagram
13.1. Wiring Diagram NA-127VB4 and NA-147VB4

44

Downloaded from www.Manualslib.com manuals search engine

 45

Downloaded from www.Manualslib.com manuals search engine

 13.2. Wiring Diagram NA-128VB4 and NA-148VB4

46

Downloaded from www.Manualslib.com manuals search engine

 47

Downloaded from www.Manualslib.com manuals search engine

 14. Exploded View and Replacement Part List
14.1. Control Panel Parts

14.1.1. Exploded View Control Panel Parts

48

Downloaded from www.Manualslib.com manuals search engine

 14.1.2. Control Panel Replacement Parts List - A
(U) : Indicates parts at the remarks that can be replaced by user.

: Components identified mark have special characteristics important for safety. When replacing any of these components use only
manufacture’s specified parts.

REF. NO PART NAME QTY CODE REMARKS

1 AXWDV-778630 NA-127VB4
1 AXWDV-778500 NA-147VB4
1 AXWDV-771900 NA-128VB4

1 AXWDV-778150 NA-148VB4

― ―
― ―
― ―

400 DETERGENT DRAWER COVER ― ―

― ―
― ―
― ―
― ―
― ―
― ―
― ―
― ―
1 AXWCV-778620 NA-127VB4WGN
1 AXWCV-777820 NA-127VB4WFR
1 AXWCV-778310 NA-127VB4WTA
1 AXWCV-761030 NA-127VB4WGB
1 AXWCV-778820 NA-127VB4WNR
1 AXWCV-777890 NA-127VB4WES
1 AXWCV-778490 NA-147VB4WGN
1 AXWCV-768000 NA-147VB4WDE
401 CONTROL PANEL
1 AXWCV-778750 NA-147VB4WNR
1 AXWCV-778020 NA-147VB4WES
1 AXWCV-761150 NA-147VB4WGB
1 AXWCV-777850 NA-128VB4WES
1 AXWCV-771890 NA-128VB4WFR
1 AXWCV-778180 NA-128VB4WTA
1 AXWCV-778140 NA-148VB4WTA
1 AXWCV-767950 NA-148VB4WDE
408 PCB FOIL 1 AXW1FS-7092
410 DISPLAY FOIL 1 AXW1FS-7315
412 ELECTRONIC CARD GR. 1 AXW24V-68093 NA-127VB4
412 ELECTRONIC CARD GR. 1 AXW24V-68094 NA-147VB4
412 ELECTRONIC CARD GR. 1 AXW24V-68088 NA-128VB4
412 ELECTRONIC CARD GR. 1 AXW24V-68095 NA-148VB4
413 CABLE AND FUSE FOLDER COVER 1 AXW2CF-55340
415 SELECTION BUTTONS 1 AXW146-55331
416 FUSE 1 AXW1FS-13553 20 A
420 LIGHT GUIDE QUAD 1 AXW146-55333
422 PROGRAM ADJ. SHAFT 1 AXW336-55341
428 SPIN / HEAT ADJ. KNOB GR. 1 AXW6C-755800
429 PROGRAM ADJ. KNOB GR. 1 AXW6C-755780

49
Downloaded from www.Manualslib.com manuals search engine
 14.2 Front Panel Parts

14.2.1. Exploded View Front Panel Parts

14.2.2. Front Panel Replacement Parts Part List

REF. NO PART NAME CODE QTY REMARKS

AXW1AB-37787 1 NA-127VB4 - NA-147VB4
1 BODY GROUP PAINTED
AXW1AB-27916 1 NA-128VB4 - NA-148VB4
AXW11N-07630 1 NA-127VB4 - NA-147VB4
2 UPPER TRAY GROUP
AXW11N-70764 1 NA-128VB4 - NA-148VB4
3 FRONT PANEL GROUP AXW1BB-42790 1
4 PLINTH GROUP AXW22S-23758 1
5 ADJUSTABLE FEET GR. AXW31-00778 4
9 HOUSING FRAM BELLOW CLIP-PHT AXW1Z-08309 1
10 DOOR LOCK AXW1619-3597 1
WATER ENTRY HOSE GROUP AXW12C-14423 1 WITHOUT AQUASTOP
20
WATER E HOSE GR AQUA STP AXW12C-09767 1 WITH AQUASTOP
22 PLINTH AXW130-23756 1
23 PLINTH COVER AXW140-23757 1 (U)
24 UPPER SUPPORT BRACKET AXW1US-70732 1
892 SCREW TT M4X8 PAN HEAD CR ― 3 FOR ASIA
893 BOTTOM PLATE ― 1 FOR ASIA
894 BOTTOM PLATE COVER ― 1 FOR ASIA
896 SCREW M10X30 AXWSCR-01322 4
897 FOOT ADJ STAMP PLS AXWADJ-14905 4

50
Downloaded from www.Manualslib.com manuals search engine
 14.3 Washing Group Parts

14.3.1. Exploded View Washing Group Parts

51
Downloaded from www.Manualslib.com manuals search engine
 14.3.2. Washing Group Replacement Parts List - A

REF. NO PART NAME CODE QTY MODEL REMARKS

AXW12A-89470 1 NA-127VB4 - NA-147VB4
103 REAR TUB GROUP
AXW12A-37596 1 NA-128VB4 - NA-148VB4
AXW32G-59330 1 NA-127VB4 - NA-147VB4
117 FRONT TUB
AXW32G-59372 1 NA-128VB4 - NA-148VB4
AXW22B-33867 1 NA-127VB4 - NA-147VB4
160 DRUM GROUP
AXW22B-57607 1 NA-128VB4 - NA-148VB4
AXW401-13066 1 NA-127VB4 - NA-147VB4
102 MOTOR
AXW401-13707 1 NA-128VB4 - NA-148VB4
AXW430-55351 1 NA-127VB4 - NA-147VB4
814 MOTOR COVER
AXW430-55350 1 NA-128VB4 - NA-148VB4
113 TUB SEAL AXW212-15077 1
101 DRIVEN PULLEY AXW502-00499 1
AXW412-25178 1 NA-127VB4 - NA-147VB4
100 BELT
AXW412-06396 1 NA-128VB4 - NA-148VB4
COUNTERSUNK HEAD BLT 8X28
122 AXWSS1-07899 4
TRX
206 TUB ENTRANCE WITH BELLOW HOSE AXWEBH-14409 1
118 TUB BELLOWS SEAL AXW212-25995 1
HEXAGON HEAD BOLT 6X30 PT AXWSS3-14521 19 NA-127VB4 - NA-147VB4
126
HEXAGON HEAD BOLT 6X30 DELTA PT AXWSS3-08870 24 NA-128VB4 - NA-148VB4
900 HEXAGON HEAD BOLT 10 X 52 AXWSB1-07415 4
901 PLAIN WASHER 10.5X40X2.5 AXW420-08965 4

810 CONICAL SPRING WSR 8.4X18X2 AXWSW1-06960 6

105 SHOCK ABSORBER PIN AXWSAP-25094 4

119 TUB GASKET CLIP AXW212-08555 1
120 FRONT CONCRETE WEIGHT AXW1231-3571 1
AXWRG1-31166 1 NA-127VB4 - NA-147VB4
121 RESISTANCE GR
AXWRG1-24071 1 NA-128VB4 - NA-148VB4
999 NTC TEMP SENSOR AXW1EV-35970 1
AXWRG1-12964 1 NA-127VB4 - NA-147VB4
899 RESISTANCE WITHOUT NTC
AXWRG1-09949 1 NA-128VB4 - NA-148VB4
115 RESISTANCE FIXING WIRE AXWRFW-14491 1
AXWSA1-01197 2 NA-127VB4 - NA-147VB4
104 SHOCK ABSORBER
AXWSA1-05034 2 NA-128VB4 - NA-148VB4
213 TUB EXIT BELLOW HOSE WITH BALL AXW1250-4954 1
124 COUNTERSUNK HEAD BOLT M 8X29 AXWSB2-05142 1
700 TUB HANGER SPRING PART AXWTHS-19298 2
AXW3441-5307 2 NA-127VB4 - NA-147VB4
800 TUB SPRING
AXW3441-4888 2 NA-128VB4 - NA-148VB4
MUSHROOM HED SQ NCK
808 AXWSB3-03063 2
BLT M 8X65
806 PLAIN WASHER 8.4X28X3 AXWSW2-07454 2
UPR CRT SUPPORT
811 AXWUCS-00507 2
SHEETIRON PART
HEX.NUT W FLANGE SERRATED
AXWXNF-00615 2 NA-127VB4 - NA-128VB4
M8 D
812
PREV.TOR.TY.HEX.NUT W FLAN.
AXWXNF-06921 2 NA-147VB4 - NA-148VB4
M8 D
AXW1PL-55352 3 NA-127VB4 - NA-147VB4
813 PLASTIC LIFTER
AXW1PL-25714 3 NA-128VB4 - NA-148VB4
AXW1231-3323 1 NA-127VB4 - NA-147VB4
112 UPPER CONCRETE WEIGHT
AXW1231-0333 1 NA-128VB4 - NA-148VB4
221 HANGER SPRING SHEETIRON PLS. AXW1HS-16727 2
AXWSS2-08716 3 NA-127VB4 - NA-147VB4
815 SCREW TT M4X12 PAN HEAD TORX
AXWSS2-08716 1 NA-128VB4 - NA-148VB4
816 FRONT TUB-RESIST PRTECT FOIL AXW1PF-07098 1
817 SCW 3,5X7 P-HEAD W CLR CRS RE. AXWSS4-15637 2

52
Downloaded from www.Manualslib.com manuals search engine
 14.4 Circulation Group Parts

14.4.1. Exploded View Circulation Group Parts

14.4.2. Circulation Group Replacement Parts List

REF. NO PART NAME CODE QTY REMARKS

921 TWIN JET HORN/LEFT AXWTJH-25993 1
922 TWIN JET HORN/RIGHT AXWTJH-25992 1
410 SCREW 4X14 PAN HEAD TYPE 2 AXWSS5-07242 1
923 TWIN JET T-ELBOW AXWTJT-25561 1
924 HANDCUFFS O20.2 AXW2HC-08653 3
925 TWIN JET NOZZLE AXWTJN-25574 2
931 TWIN JET HOSE_H NO:2 AXWTJH-25991 1
927 TWIN JET CBL HOSE HLDR PLASTIC AXWTJC-25867 5
928 HANDCUFFS O26.8 AXW2HC-09578 1
929 PUMP PROTECTION FOIL-3 AXW1PF-04693 1
930 TWIN JET HOSE_N NO:1 AXWTJH-25194 1
118 TUB BELLOWS SEAL AXW212-25995 1
926 CIRCULATION PUMP AXW8CP-06191 1
285 PUMP GR.(FLTR,TH,PROTECT) AXW8FT-06391 1
446 ISO 7049 ST 4,2x13 TYPE 2 AXWSS6-07273 1
918 DRAIN FILTER AXWDF-653900 1
932 HANDCUFFS Ø15.88 AXW2HC-08652 4
933 P-CIRCULTN TUB GASKET GR AXW21D-31321 1
934 TWIN JET HOSE GROUP AXWTJH-34816 1

53
Downloaded from www.Manualslib.com manuals search engine
 14.5 Detergent Drawer Group Parts

14.5.1. Exploded View Detergent Drawer Group Parts

14.5.2. Detergent Drawer Group Replacement Parts List

REF. NO PART NAME CODE QTY MODEL REMARKS

203 WATER DISTRIBUTION PLATE GR AXW1WD-19141 1
205 DETERGENT DRAWER HOUSING AXW1DD-19136 1
200 DETERGENT DRAWER AXW1V-605590 1
202 SIPHON COVER AXW1PV-05600 1 (U)
228 PLASTIC HOSE CLAMP AXW1PH-04189 4
AXW1VD-04536 1 NA-127VB4 - NA-147VB4
207 VALVE-DETERGENT BOX HOSE
AXW1VD-04537 1 NA-128VB4 - NA-148VB4
AXW1VD-07796 1 NA-127VB4 - NA-147VB4
208 VALVE-DETERGENT BOX HOSE
AXW1VD-07797 1 NA-128VB4 - NA-148VB4
209 VALVE(TWO EXIT) AXW1VT-13042 1
AXW21D-60571 1 NA-148VB4
270 DETERGENT BOX GROUP
AXW21D-60574 1 NA-147VB4 - NA-148VB4
AXW31D-60572 1 NA-127VB4
AXW31D-60577 1 NA-128VB4
275 DETERGENT BOX GROUP/HOSE
AXW31D-60573 1 NA-147VB4
AXW31D-60578 1 NA-148VB4
AXW41D-56640 1 NA-127VB4
AXW41D-56641 1 NA-128VB4
280 DETERGENT BOX GROUP/FULL
AXW41D-56642 1 NA-147VB4
AXW41D-56643 1 NA-148VB4

54
Downloaded from www.Manualslib.com manuals search engine
 14.6 Pressure Switch Hose Group Parts

14.6.1. Exploded View Pressure Switch Hose Group Parts

14.6.2. Pressure Switch Hose Group Replacement Parts List

REF. NO PART NAME CODE QTY REMARKS

210 TUB EXIT BELLOW HOSE BALL AXW1BB-10200 1
211 PRESSURE SWITCH HOSE AXW1PS-19319 1
212 PRESSURE SW WATER RESERVOIR AXW1PS-20089 1
213 TUB EXIT WITH BELLOW HOSE AXW1250-4954 1
234 HOSE HANDCUFFS O32,7 AXW1HC-07366 1
244 HOSE HANDCUFFS AXW1HC-08991 1

295 PRESSURE SW H GR.PYT BALL SYST AXW2PS-29739 1

55
Downloaded from www.Manualslib.com manuals search engine
 14.7 Body Group Parts

14.7.1. Exploded View Body Group Parts

56
Downloaded from www.Manualslib.com manuals search engine
 14.7.2. Body Group Replacement Parts List

REF. NO PART NAME CODE QTY MODEL REMARKS

285 PUMP GR.(FLTR,TH,PROTECT) AXW8FT-06391 1
220 DRAIN HOSE ROUTER PLASTIC AXW1DH-19322 1
219 DRAIN HOSE AXW1DH-08945 1
225 ELECTRONIC PRESSURE SENSOR AXW1EP-06187 1
215 EMI FILTER AXW2EF-15002 1
AXW14B-13279 1 NA-127VB4 - NA-147VB4
249 CBL HARN
AXW14B-13277 1 NA-128VB4 - NA-148VB4
250 CABLE HARNESS HOLDER PLS AXW1CH-22148 1
AXW3441-5307 2 NA-127VB4 - NA-147VB4
800 TUB SPRING
AXW3441-4888 2 NA-128VB4 - NA-148VB4
221 HANGER SPRING SHEETIRON PLS. AXW1HS-16727 2
235 DRAIN HOSE HOLDING PLS AXW1HC-14270 4
AXW4A-17511 1 EU COUNTRY EXCEPT UK
239 POWER CORD GROUP
AXW4A-17512 1 UNITED KINGDOM
222 PRESSURE SW MOUNTING CLIP AXW1HC-22768 1
238 SPEED CONTROL HOLE STOPPER AXW1SC-16338 1
AXW2CB-13278 1 NA-127VB4 - NA-147VB4
296 CBL GR
AXW2CB-13276 1 NA-128VB4 - NA-148VB4
242 TRANSPORT SCREW PLASTIC-A-II-P AXW1TS-60786 4
243 TRANSPORT SCREW PLASTIC-B-II-P AXW1TS-60789 4
240 TRANSPORT SCREW-2 AXWSB4-08363 4
241 PLAIN WASHER 10.5X40X2.5 AXW420-08965 4
AXW2SH-43472 1 NA-128VB4 - NA-148VB4
231 SPRING HANGER SHEETIRON GR
AXW2SH-70737 1 NA-127VB4 - NA-147VB4
237 TRANSPORT SCREW STOPPER AXW1TS-14437 5
290 TRANSPORT SCREW GROUP AXW2TS-15676 4
132 CABLE TIE YKB150 AXWCT-075920 7
918 DRAIN FILTER AXWDF-653900 1
919 HOSE CLAMP DIA 8.6 AXWHC-003440 1
920 FRONT P DROP FIXING PL AXWPV-204560 4

57
Downloaded from www.Manualslib.com manuals search engine
 14.8 Porthole Group Parts

14.8.1. Exploded View Porthole Group Parts

14.8.2. Porthole Group Replacement Parts List

REF. NO PART NAME CODE QTY REMARKS

28 SCR 3.5X16PAN.HE.W COL.CR.RE. AXWSS7-08715 10
8 INNER DOOR PLASTIC AXW1DP-55347 1
12 HINGE II-M5 AXW192-15559 1
13 HINGE BUSHING II AXW192-23907 4
33 DOOR HINGE SUPPORT SHEET AXW192-08152 1
410 SCR 4X12PAN HE W CLR UNDER HE AXWSB8-13513 6
18 INNER DOOR PLS INSERT PART AXW1DP-75590 1
17 DOOR HOOK II.(METAL) AXW1DH-08931 1
15 HOOK SPRING AXW1HS-07443 1
16 HANDLE SPRING AXW1HS-14985 1
7 DOOR GLASS AXW1GD-03771 1
27 DOOR HANDLE TONGUE PIN AXW1DH-07434 3
14 DOOR HANDLE AXW1DH-55930 1
32 OUTER DOOR PLS. INNER FRAME AXW1DS-75592 1
31 FRONT DOOR COVER AXW1DC-75594 1
6 OUTER DOOR PLASTIC AXW1DP-55910 1

58
Downloaded from www.Manualslib.com manuals search engine
 50 PORTHOLE GROUP AXW2DP-55890 1 (U)

14.9. Accessories
14.9.1. Accessories View

988 992

994 995

996 997 998

989

59
Downloaded from www.Manualslib.com manuals search engine
 14.9.2. Accessories Replacement Parts List

REF. NO PART NAME CODE QTY REMARKS

988 PROGRAM LABEL GR WNR AXW90PL-8953 1 *1
989 PROGRAM LABEL GR WGN AXW90PL-8911 1 *2
992 SERVICE LIST GUARANTEE AXW9911-9390 1
USER'S MANUEL EN2 AXW4F-68905 1 ENGLISH-WGN
USER'S MANUEL DE2 AXW4F-68906 1 GERMAN -WGN
USER'S MANUEL FR2 AXW4F-68907 1 FRENCH-WGN
USER'S MANUEL NL2 AXW4F-68908 1 DUTCH-WGN
USER'S MANUEL CS2 AXW4F-68909 1 CZECH-WGN
USER'S MANUEL PL2 AXW4F-68910 1 POLISH-WGN
USER'S MANUEL FR AXW4F-68214 1 FRENCH-WFR
USER'S MANUEL EN3 AXW4F-68947 1 ENGLISH-WNR
994 USER'S MANUEL NO AXW4F-68948 1 NORWEGIAN-WNR
USER'S MANUEL SV AXW4F-68949 1 SWEDISH-WNR
USER'S MANUEL DA AXW4F-68950 1 DANISH-WNR
USER'S MANUEL FI AXW4F-68952 1 FINNISH-WNR
USER'S MANUEL ES AXW4F-68784 1 SPANISH-WES
USER'S MANUEL PT AXW4F-69460 1 PORTUGUESE-WES
USER'S MANUEL IT AXW4F-68845 1 ITALIAN-WTA
USER'S MANUEL DE AXW4F-67777 1 GERMAN-WDE
USER'S MANUEL EN AXW4F-66641 1 ENGLISH-WGB
AXW90EL-6634 1 NA-127VB4
AXW90EL-6629 1 NA-147VB4
995 ENERGY LABEL AXW90EL-8212 1 NA-128VB4
AXW90EL-3276 1 NA-128VB4WES
AXW90EL-7775 1 NA-148VB4
996 LIQUID DETERGENT LEVEL PLATE AXW90LD-9158 1
997 DRAIN HOSE COAT RACK AXW90HC-0601 1
998 TRANSPORT SCREW STOPPER AXW1TS-14437 1

*1 Ref. No.988 includes program label in following languages: Norwegian, Swedish, Finnish and Danish.

*2 Ref. No.989 includes program label in following languages: Dutch, French, Serbian, Turkish, Polish, Czech,
Hungarian, Slovakian, Romanian, Crotaian, Bulgarian and Slovenian.

60
Downloaded from www.Manualslib.com manuals search engine
 14.10. Packaging Group Parts
14.10.1. Exploded View Packaging Group Accessories

61
Downloaded from www.Manualslib.com manuals search engine
 62
Downloaded from www.Manualslib.com manuals search engine
 14.10.2. Package Group Replacement Parts List

REF. NO PART NAME CODE QTY MODEL

AXWPV-154390 1 NA-128VB4 - NA-148VB4
900 BOTTOM STYROFOAM
AXWPV-666330 1 NA-127VB4 - NA-147VB4
AXWPV-666330 1 NA-127VB4
AXWPV-682100 1 NA-128VB4
901 TOP CARTON
AXWPV-066642 1 NA-147VB4
AXWPV-067700 1 NA-148VB4
902 REAR STYROFOAM(LEFT) AXWPV-277830 1
903 REAR STYROFOAM(RIGHT) AXWPV-277820 1
904 FRONT STYRF L-SIGMA PLUS 2 AXWPV-277810 1
905 FRONT STYRF R-SIGMA PLUS 2 AXWPV-280760 1
906 CORNER CARDBOARD AXWPV-002040 1
907 TUB SUPPORT STYROFOAM AXWPV-053000 1
908 PORTHOLE PRO. STYROFOAM AXWPV-244940 1
PACKAGE CARTON 8K AXWPV-450870 1 NA-128VB4 - NA-148VB4
909
PACKAGE CARTON 7K AXWPV-450840 1 NA-127VB4 - NA-147VB4

63
Downloaded from www.Manualslib.com manuals search engine