Scribd
Upload
162 views6 pages

Hanger of Vibrating Feeder

The document is a specification from PT.KOMIPO PEMBANGKITAN JAWA BALI for hangers of a vibrating feeder. It requires 4 sets each of long and short hangers made of carbon steel S45C with diameters of 30mm and 25mm respectively. It also specifies bolt sets and U-plates for the hangers. Drawings and pictures show the designs of the long and short hangers. The existing hangers have broken so upgraded hangers made of VCN150 steel with 25mm diameters are specified to handle wet limestone conditions.

Uploaded by

Aris Suprapto
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
162 views6 pages

Hanger of Vibrating Feeder

The document is a specification from PT.KOMIPO PEMBANGKITAN JAWA BALI for hangers of a vibrating feeder. It requires 4 sets each of long and short hangers made of carbon steel S45C with diameters of 30mm and 25mm respectively. It also specifies bolt sets and U-plates for the hangers. Drawings and pictures show the designs of the long and short hangers. The existing hangers have broken so upgraded hangers made of VCN150 steel with 25mm diameters are specified to handle wet limestone conditions.

Uploaded by

Aris Suprapto
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 6

Doc Ref.

KPJB-0952-03
PT.KOMIPO PEMBANGKITAN JAWA BALI
PLTU TANJUNG JATI B UNIT #3&4 Form
KPJB-0952-03-ZZ-FM-02
No.
Design
Hanger of Vibrating Feeder Division
Mechanical Division
Revision
(february 14, 2019) Number
00

Material Specification of Hanger :


Install Quantity/Unit : 4 set hangers (2 longs ; 2 short)
Request order : 4 Set for Long Hanger
: 4 set, for Short Hanger
Steel Material :
1. Solid bar Diameter 30 mm for long and Diameter 25 mm for short,
Carbon steel S 45 C with coating primer & top coat
2. Bolt set (washer, spring washer, double nut. Bolt: Carbon steel 8.8 Nm, L: 100mm, with threaded 40mm)
3. U Plate : Carbon steel S 45 C
Without Rubber absorbent
Detail Specification see the drawing
Required : Mill and COM is required
Warranty : 6 months
Picture for reference :

Short Hanger of Vibrating Feeder rear side

Drawing
Long Hanger of Vibrating Feeder front side for reference
Long Hanger has broken (rapture)

1/4
Doc Ref. KPJB-0952-03
PT.KOMIPO PEMBANGKITAN JAWA BALI
PLTU TANJUNG JATI B UNIT #3&4 Form
KPJB-0952-03-ZZ-FM-02
No.
Design
Hanger of Vibrating Feeder Division
Mechanical Division
Revision
(february 14, 2019) Number
00

1. Long Hanger

Plate,
t: 40 mm

12 12

2/4
Doc Ref. KPJB-0952-03
PT.KOMIPO PEMBANGKITAN JAWA BALI
PLTU TANJUNG JATI B UNIT #3&4 Form
KPJB-0952-03-ZZ-FM-02
No.
Design
Hanger of Vibrating Feeder Division
Mechanical Division
Revision
(february 14, 2019) Number
00

2. Short Hanger

12 12

3/4
Doc Ref. KPJB-0952-03
PT.KOMIPO PEMBANGKITAN JAWA BALI
PLTU TANJUNG JATI B UNIT #3&4 Form
KPJB-0952-03-ZZ-FM-02
No.
Design
Hanger of Vibrating Feeder Division
Mechanical Division
Revision
(february 14, 2019) Number
00

Long Hanger Short Hanger

4/4
Doc Ref. KPJB-0952-03
PT.KOMIPO PEMBANGKITAN JAWA BALI
PLTU TANJUNG JATI B UNIT #3&4 Form
KPJB-0952-03-ZZ-FM-02
No.
Design
Hanger of Vibrating Feeder Division
Mechanical Division
Revision
(february 14, 2019) Number
00

SPECIFICATION OF HOOK HANGER LIMESTONE VIBRATING FEEDER

Hook Hanger installed : 4 pcs


Spare parts to be purchased : 6 pcs, (2 pcs for stock in trouble shooting or emergency case)

Existing Hook Hanger broken (rapture)


condition

Existing Hook Hanger temporary


welded with threaded screw

Existing Hook Hanger :


1. Material : SUS 304
Upgrade material & dimension
2. Diameter : 20 MM
New Hook Hanger Note :
Materials : VCN 150 Due to rainy season and wet limestone
Diameter : 25 mm handling condition(overweight), the hook
Diameter Ulir : M 24 mm hangers has broken, however we improve
Complete with : Double Nut, Flat & Spring Washer with upgrade the material and dimension to
get the stronger hook hangers.
Hook Hanger dimension
5/4
Doc Ref. KPJB-0952-03
PT.KOMIPO PEMBANGKITAN JAWA BALI
PLTU TANJUNG JATI B UNIT #3&4 Form
KPJB-0952-03-ZZ-FM-02
No.
Design
Hanger of Vibrating Feeder Division
Mechanical Division
Revision
(february 14, 2019) Number
00

214259 : HOOK, HANGER, FOR VIBRATING FEEDER, MATERIAL VCN 150, DIAMETER 25 MM,
THREADED DIA. : M 24, INCLUDING NUT & WASHER
206688 : HANGER, FOR VIBRATING FEEDER, SHORT
206687 : HANGER, FOR VIBRATING FEEDER, LONG

6/4

You might also like