Scribd
Upload
134 views2 pages

Mril Prime PDF

The MRIL-Prime tool allows for faster logging speeds while maintaining measurement quality. It features nine independent measurement volumes that continuously acquire fully polarized, full-spectrum data without idle times. This allows operators to obtain porosity, permeability, fluid typing, and other reservoir data in a single pass for optimized well completion. The MRIL-Prime improves on existing MRIL tools with additional frequencies and an advanced magnet design, resulting in superior signal-to-noise ratios and measurement capabilities.

Uploaded by

Don Pham
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
134 views2 pages

Mril Prime PDF

The MRIL-Prime tool allows for faster logging speeds while maintaining measurement quality. It features nine independent measurement volumes that continuously acquire fully polarized, full-spectrum data without idle times. This allows operators to obtain porosity, permeability, fluid typing, and other reservoir data in a single pass for optimized well completion. The MRIL-Prime improves on existing MRIL tools with additional frequencies and an advanced magnet design, resulting in superior signal-to-noise ratios and measurement capabilities.

Uploaded by

Don Pham
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

'* MRIL'-Prime

Tatal Porosity, Permeability and Hydracarbon Typing at a Faster Logging Speed

Three to four times faster logging speed tl-ran processing meihods, all nine nleasuremellts can now
previous generation toois operate continuously and independently, allowing
Nine measurement volumes give superior each sensitive volume to provide continnal acquisition
signal-to-noise ratio of fully polarized, full-spectrurn data. For the operato4
that means faster logging, no idle time, and all
All applications in a singie pass applications accomplished in a single pass.
No idle time
More tiran fifteen years ago, NUMAR Corporation
developed its Magnetic Resonance Imaging Logging
(MRIL) service arrd startecl a massive change in the way
operatcrs derive information about the production
poleniial of oil and gas reservoirs. NoW NUMAR has
propelled tl"lat technology a giant step forward through
ihe clevelopmerrt of its MRIL"-Prime tool"

Start With Superior Technology...


MRIL service accr-rrately and directiy measures key
factors that infh-rence tlie ability of a well to produce
commercial quantities of oil or gas" It is used in the
openhole logging process to:
. Measnre total fluicl-fillecl porosity
. Provide fluids-only lrleasLlremerll, unaffecteci by
mineraIogica1 effects

' Ider-rtify 1ow-resistivity pay within rrrrmovable


water volurnes
. Deiermine
- Permeability
- Fluid types and net hvdrocarbon feet
- Fluicl contacls
- Changes in oil viscosity
Sr-rchinfon.nation is extremely valuable for clptirnizinu
slin-Lulation ancl completiorr programs, thereby optimiz-
ing the procluctivity of each well e{rillecl.

...And Make lt Even Better


The MRIL-Prime tool aclcls six measlrremenl
fi'er1trencies anc-i an improvecl uraguet clesign
to tire existing MRIL service capabilities,
resultir.rg in nine adjacent sampling vol-
r-rn-res. With the acldition of new, acl-
varrcerl c'lata accprisitiori irncl signal

Measure Your Fluids First


Cable Head

OD: 3 s/s in.


D4TG 81 in
Weight: 100 lb

. Note 4 7/8 inch diameter Sonde is 1 31 .6 inches in length

OD: 3 s/a in.


MRCC-D 166 in. BOREHOLE CONDITIONS
Weight: 250 lb Eorehole Size
lool drameter I Mrnrmum Maximum
/16 tn. | 5 //u rn. 8.5 rn.
tn. 1?.?5 n.
upen/uaseo nore: upen note onty
OD: 3 s/e in.
tsorenote flutos: NO reslncflons - anv wDe dfllltno mud or alr
MREC-D 166 in Bugosity effect; N0 eftect it not in sensitive volume
Weight: 250 lb Mudcake eftect: None, if not in sensitive volume
Mud res, lower limrt: 0.02 Ohm"m
ldeal when centerline of tool is close to
centsrline of borehole, +l 0.5 in.
Tool position: Centralizers and standoffs are required to
provide proper centralization.

OD: 6 in.
Sonde
Weight: 775 lb : +/- 1 PU or 5 %, whichever is

ELECTRICAL SPECIFICATIONS
Cablehead Voltage: 120 VAC t- 18 VAC at 60 Hz
Instrument Current: 400 mA
Transmitler Power: < 1 .5 KW averaoe
Transmitter voltaqe: +/- 300 VD0 at cablehead
Transmitter Current: 3 A maximum

OD: 3 5/e in.


Crossover
60 in
Sub Weight: 100 lb

HN01 773

www.halliburton.com

,,vuvrnn A Haltiburton Company

Salesof Halliburton products and services will be in accord solely with the terms and conditions
contained in the contract between Halliburton and the customer tl'lat is applicable to the sale .

HU912 A4199 O 1999 NUMAR Corporation All Rights Reserved Printed irr U.S.A

You might also like