Sejadi Modification Platfrom Project Data Sheet for Thermoelectric Generator
Sejadi STS Platform SP-SJ-ELE-DAS-CV X-000-00001-00
Date: 2-Mar-2015 Rev U
Client Chevron Indonesia Company Engineering Org.- Spec.No. SP-SJ.ELE.SPC-CVX-000-00001-00
Project Location East Kalimantan Specifier Name Nll Equipment No.
Project No.Nil P.O.No.
1 SERVICE CONFITIONS VENDOR NOTE’S
1.1 Applicable Standard : UL, NEC
1.2 Drawing References :
1.3 Other Related Doc :
2 SERVICE CONFITIONS VENDOR NOTE’S
2.1 Location : Indoor Outdoor Dusty
2.2 Design Ambient Temperatur : Min: 70oF/ 21oC Max: 95oF/ 35oC
2.3 Relative Humidity : Max: 95%
2.4 Altitude (above mean sea level) : 51 Feet
2.5 Design Wind Velocity : 100mph
2.6 Earthquake Seismic Zone : 2
PARTICULARS OF EQUIPMENT UNITS REQUIREMENT VENDOR RESPONSE
3 THERMO ELECTRIC GENERATOR
3.1 Vendor Global Thermoelectric
3.2 Product Type STA
3.3 Mounting Type Free Standing
3.4 Dimension (L x W x D) inch STA
3.5 Total Wight Lbs STA
3.6 Classification Area Class 1 Division 1, Group D, T3A
3.7 Enclosure Material SS 316L
3.8 Ingress of Protection NEMA 4x/7
3.9 Cooling System Natural Convection
3.10 Color Manufacture Standard
3.11 Voltage Output 24 – 30 VDC
3.12 Electrical Measurement Voltmeter and Ampermeter
3.13 Electrical Protection Blocking Diode
3.14 DC Voltage Regulator
3.15 ThEG Failure Dry Contact Alarm
3.16 Power Rating at amb temp 70oF anda 24 VDC Watt 100 (Note 3,4,5)
3.17 Power Rating at 20 years usage and 95oF amb temp Watt STA (Note 3,4,5)
4 MISCELLANEOUS
4.1 Isolator Switch Junction Box
4.2 Dimension (L x W x D) inch STA
4.3 Mounting Wall Mounting
4.4 Total Weight Lbs STA
4.5 Classification Area Class 1 Zone 1, Group D, T3A
4.6 Enclosure Material Copper Free Cast Aluminum
4.7 Ingress of Protection IP 56
4.8 Type of Protection AeX’d’
4.9 Bus Bar Material Copper
4.10 Rated Busbar Current 50 Amp
4.11 Indication Lamp: LED Cluster
4.12 On Red
4.13 Electrical Protection Over Current (On Load Fuse Isolator)
4.14 Lockable by Padlock Yes/No Yes, Required
4.15 Voltage Regulator Junction Box
4.16 Dimension (L x W x D) Inch STA
4.17 Mounting Wall Mounting
4.18 Total Weight Lbs STA
4.19 Classification Area Class 1 Zone 1, Group D, T3A
4.20 Enclosure Material Copper Free Cast Aluminum
Sejadi Modification Platfrom Project Data Sheet for Thermoelectric Generator
Sejadi STS Platform SP-SJ-ELE-DAS-CV X-000-00001-00
Date: 2-Mar-2015 Rev U
Client Chevron Indonesia Company Engineering Org.- Spec.No. SP-SJ.ELE.SPC-CVX-000-00001-00
Project Location East Kalimantan Specifier Name Nll Equipment No.
Project No.Nil P.O.No.
PARTICULARS OF EQUIPMENT UNITS VENDOR RESPONSE
4 MISCELLANEOUS – Contd’
4.21 Ingress of Protection IP 56
4.22 Type of Protection AEx’d’
4.23 Voltage Regulator Rated Power 250 Watt
4.24 Indication Lamp: LED Cluster
4.25 On RED
4.26 Electrical Protection 2 Pole, MCB
4.27 Metering Indication Volt, Amp
4.28 DC Distribution Board
4.29 Dimension (L x W x D) Inch STA
4.30 Mounting Wall Mounting
4.31 Total Weight Lbs STA
4.32 Classification Area Class 1 Zone 1, Group D, T3A
4.33 Enclosure Material Copper Free Cast Aluminum
4.34 Ingress of Protection IP 56
4.35 Type of Protection AEx’d’
4.36 Bus Bar Material Copper
4.37 Rated Busbar Current 50 Amp
4.38 Indication Lamp: LED Cluster
4.39 On Red
4.40 Fault Yellow
4.41 Metering Indication Volt, Amp
4.42 Lockable by Padlock Yes/No Yes, Required
4.43 Surge Arrestor Yes/No Yes, Required
4.44 Automatic Insulation Fault Locator Yes/No Yes, Required
4.45 Electrical Protection Reverse Current
4.46 Short Circuit
4.47 Thermal Overload
5 NOTES
1 STA = Vendor To Advise, TBA = To Be Advise;
2 Vendor shall provide gas conditioning system to treat COMPANY fuel gas composition (attachment-1) into package fuel gas specification,
which is complete with overpressure protection system which comply to API 14C. The fuel gas treatment and associated protection device
shall be rated to 150# ANSI rating class
3 Vendor shall confirm and warrant maximum and minimum rated continuos power at site ambient temperature and site available fuel gas
characteristic
4 Vendor shall advice output power rating for new condition and identify ageing factor after 20 year usage
5 Vendor shall take into consideration losses power up to downstream connected load and warrant minimum continuous power 80 watt at
95oF(35oC)
6 Thermoelectric Generator shall be designed for continuous operation with minimal maintenance or human intervention, required
maintenance intervals and duration shall be indentified in Vendor documentation
7 Vendor shall ensure that external surface enclosure ThEG package temperature not exceed 140Of (60Oc) in any condition
8 Vendor shall ensure reliability and rating of each component inside distribution board cause of explosion proof type distribution board will
derate their capacity
9 Vendor shall provide engineering calculation in regard selecting of each equipment such as on load fuse isolator, incomer MCB, etc for
COMPANY approval
10 Voltage Regulator / DC to FC converter shall having minimum 90% efficiency, EMI according to IEC 61000 Class A, and having minimum MTBF
100,000h
11 Vendor shall provide all necessary instrumentation accessories required such as valve, union, tubing, etc for package TEG
12 Vendor shall provide all necessary stainless steel 316L bolt nut for equipment mounting purpose
