TABLE OF CONTENTS

EXTERIOR LIGHTING
Wing Position Lights 2
Tail Position Lights 7
Floodlights 11
Anti-Collision Navigation Lights 12
Navigational Position Lights 14
Integrated Wing Tip Assemblies 16
Strobe Lights 17 A E RO SPA CE
Strobe Power Supplies 21
Strobe Flasher 22
Fixed Landing & Taxi Lights 24
Wing Inspection Lights 26
Logo Lights 28
Emergency Exit Lights 29

ELECTRO-MECHANICAL LIGHTING
Solid State Switch 22
Retractable Landing & Search Lights 23

INTERIOR LIGHTING
Floodlights 30
Dome Lights 32
Cockpit Lights 34
Spotlights 36
Emergency Exit Signs & Lights 37
Emergency Exit Power Supplies 38

LENSES & LAMPS 39

MOTORS & FLASHTUBES 40

Our Product Line Includes:

Navigation & Position Lights
Retractable Landing & Search Lights
Night Vision Compliant Equipment
Strobes & Power Supplies
Windshield Wiper Systems
Cabin & Cockpit Lighting
Emergency Escape Lighting

Aerospace Electronic Systems

Grimes Aerospace Company
A Subsidiary of Honeywell
Lighting & Electronics
240 Twain Avenue, Urbana, OH 43078 U.S.A.
TEL: 937.484.2100 FAX: 937.484.2101
TOLL FREE: 800.788.5118
WEB: www.grimesaero.com
Seaplane © 1997 The Learning Company, Inc. and its licensors
Wing Position Lights EXTERIOR LIGHTING

30-2366 WING POSITION LIGHT

Used on Cessna Citation X
Designed to meet applicable requirements of FAA-TSO-C30c for Type I & II Forward
position lights
Utilizes a long-life 1200-hour halogen lamp

SPECIFICATIONS
Weight 0.33 Lbs. Length 2.06 x Width 2.06 x Height 1.94 exposed/1.65 installed inches.

1
ITEM PART NUMBER DESCRIPTION
2
1a A1233A-2 Lens, Aviation Red
1b A1233A-3t Lens, Aviation Green
3
2 55-2471-1 Lamp, 26.5V, 40W
3 60-5068-1 Lens Retainer
4 4 31-8069-1 Light Sub-assembly

A1285 WING POSITION LIGHT

FAA-TSO-C30b
Used on Bell 206, 212, 214, 222, 230 & 412; Robinson R-22
Compact teardrop shape designed to mount on the wing tip
Easily relamped utilizing standard tools

1
SPECIFICATIONS
Weight: 0.20 Lbs. Dimensions: Length 3.88 x Width 1.72 x Height 3.06. 2

ITEM PART NUMBER DESCRIPTION 3

1 MS24693S30 Screw No. 6-32x3/4
2 A1104 Shield 4
3a A1280-1 Lens, Clear
3b A1280-2 Lens, Red 5
3c A1280-3 Lens, Green
4 A1257A Gasket
5a / b A7512-12 / -24 Lamp, 12V, 26W / 28V, 26W 6
5c / d 1512 / 1524 Lamp, 12V, 21W / 28V, 21W
Parts 7-11 not
6a 30-0009-23 Base Assembly Short shown; same
6b 30-0009-33 Base Assembly, Regular as A2064, p.7

2 © 2000 HONEYWELL INTERNATIONAL INC.

EXTERIOR LIGHTING Wing Position Lights

A1815 WING POSITION LIGHT

FAA-TSO-C30b
Used on Canadair Challenger 600, 601 & 604; Cessna 310, 335, 340, 402, 404, 414,
421, 425 & 441; Mitsubishi MU-2P, MU-300
Lightweight & compact
Single indexing bayonet base lamp
Designed to be recessed into the wing tip
Easily relamped utilizing standard screwdriver
Isolated ground terminal
1

SPECIFICATIONS
Weight: 0.27 lbs. + wire weight. Length 2.37 x Width 1.78 x Height 3.68 inches.
3

ITEM PART NUMBER DESCRIPTION 4

1 NAS388-6-16 Screw No. 6-32x1”
2 A6177 Lens Retainer
5
3 A6053 Gasket
4a A1280-1 Lens, Clear 6
4b A1280-2 Lens, Red
4c A1280-3 Lens, Green
5 A1257A Gasket
6a A7512-24 Lamp, 28V 7
6b 600 Lamp, 6V
6c 628 Lamp, 26.5V
6d 1512 Lamp, 14V
6e 1524 Lamp, 28V 8
7 A1825 Lampholder Assembly
8 A1811 Base 9
9 A2351-1 Terminal 10
10 A2353A Terminal Guide
11 A1783 Spring 11
12 A4149 Insulator 12
13 A1111 Nut 13

© 2000 HONEYWELL INTERNATIONAL INC. 3

Wing Position Lights EXTERIOR LIGHTING

30-1661 WING POSITION LIGHT

FAA-PMA
Used on Fairchild Metros
Available in clear or colored as required
Utilizes a single 28V bayonet base lamp
Easily relamped by utilizing standard tools
Compact dual wing position light designed to be recessed in the wing tip
Isolated ground terminal

SPECIFICATIONS
Weight: 0.38 lbs. Length 2.25 x Width 2.25 x Height 1.08 exposed/3.28 total inches.
1
2
3
ITEM PART NUMBER DESCRIPTION
1 31-5407-1 Lens Retainer
4
2a / b A1280-2 / -3 Lens, Red / Green
3 A1257A-5 Gasket
4 A7512-24 Lamp, 28V
5 5 A1825-6 Lampholder Assembly

30-2600 WING POSITION LIGHT

FAA-TSO-C30c
Used on Lear 45; Bell 427
Stainless steel Isolated Ground lampholder
Compact tear drop shape designed to mount on the wing tip

SPECIFICATIONS
Weight: 0.30 lbs. Length 3.82 x Width 1.70 x Height 1.07 exposed, 1.44 installed inches.
1
2
3 ITEM PART NUMBER DESCRIPTION
4 1 MS24693C30 Screw #6-32
5 2a / b A1280-2 / -3 Lens (Aviation Red) / (Aviation Green)
3 A1104 Shield
4 A1257A Gasket
5a / b 628 / A7512-24 Lamp, 26.5V / 28V
6 6a / b 31-8536-1 / -2 Base Assembly (LH) / (RH)

4 © 2000 HONEYWELL INTERNATIONAL INC.

EXTERIOR LIGHTING Wing Position Lights

22885 WING POSITION LIGHT

FAA-TSO-C30b for Type I & II forward position lights
Used on Learjet 24, 25, 28, 29, 35, 54, 55 & 56; Gulfstream GIII, GIV
Utilizes a single indexing bayonet base lamp
Lightweight, non-magnetic assembly
Designed to be recessed in the wing tip

SPECIFICATIONS
1 Weight: 0.33 lbs. Length 3.35 x Width 2.50 inches.

2
ITEM PART NUMBER DESCRIPTION
3 1a A1233A1 Lens, Aviation Clear White
1b A1233A2 Lens, Aviation Red
1c A1233A3T Lens, Aviation Green
2 A4174-24 Lamp, 28V, 40W
4 3 A7934-3 Lens Retainer
4 10591-1 Base Assembly

30-2478 WING POSITION LIGHT

Used on Gulfstream GV
Designed to meet applicable requirements of FAA-TSO-C30c for Type I & II Forward
position lights
Utilizes a long-life 1200-hour halogen lamp

SPECIFICATIONS
1 Weight 0.33 Lbs. Length 2.06 x Width 2.06 x Height 1.94 exposed/1.65 installed inches.

2 ITEM PART NUMBER DESCRIPTION

1a A1233A2 Lens, Aviation Red (-1)
3
1b A1233A3t Lens, Aviation Green (-2)
2 55-2471-1 Lamp, 26.5V, 40W
3 A7934-3 Lens Retainer
4 4 31-8068-1 Housing Assembly

© 2000 HONEYWELL INTERNATIONAL INC. 5

Wing Position Lights EXTERIOR LIGHTING

30-1728 WING POSITION LIGHT

FAA-PMA
Used on Lear 31A, 60
Lightweight non-magnetic assembly
Single indexing bayonet base lamp
Designed to be recessed into the wing tip
Isolated ground terminal

SPECIFICATIONS
Weight: 0.33 lbs. Length 4.13 x Width 2.06 inches.
1

2 ITEM PART NUMBER DESCRIPTION

3 1a A1233A-2 Lens (Aviation Red)
1b A1233A-3T Lens (Aviation Green)
2 A4174-24 Lamp, 28V, 40W
4 3 A7934 Lens Retainer
4 31-2996-3 Base Assembly

30-1265 WING POSITION LIGHT

FAA-TSO-C30b
Used on Beech C23 Sundowner, Duchess
Combination position & strobe light
Designed for installation on the wing tip to provide 360 degree strobe coverage
Exceeds minimum anti-collision light intensity & distribution requirements of FAR 23

SPECIFICATIONS
1 Weight: 0.99 lbs. Length 6.18 x Width 1.94 x Height 2.20 inches.

2
ITEM PART NUMBER DESCRIPTION
3 1 MS51957-27 Screw #6-32x5/16”
4 2a 31-4195-1 Lens Assembly (Aviation Red)
2b 31-4195-2 Lens Assembly (Aviation Green)
3 55-0221-3 Flashtube
4a / b A7512-12 / -24 Lamp 13V, 26W / 28V, 26W
5
5 31-4182-1 Light Subassembly

6 © 2000 HONEYWELL INTERNATIONAL INC.

EXTERIOR LIGHTING Tail Position Lights

A2064 TAIL POSITION LIGHT

FAA-TSO-C30b
Used on Canadair Challenger; Cessna Citation II, III, V, VI, 152, 172, 180 & 182;
Bell Helicopters; Piper Aztec, Pawnee, Tomahawk, Warrior, Archer, Arrow Dakota,
Seminole, Seneca, Chieftain & Cheyenne Series; Mitsubishi MU-2P, MU-300
Colored lenses are also available
Manufactured of nonmagnetic materials, unit utilizes single bayonet based lamp to
provide the required lighting pattern
Easily relamped utilizing a standard screwdriver

SPECIFICATIONS
1 Weight: 0.18 lbs. Dimensions: Length 2.12 x Width 1.68 x Height 3.38 (1.38 exposed) in.

2 ITEM PART NUMBER DESCRIPTION

1 SC-826 Screw No. 4-40x5/8, Type “B”
3 2 A2108 Lens Retainer
3a A4513-1 Lens, Clear
3b A4513-3 Lens, Green
4 3c A4513-7 Lens, White
3d A4513-11 Lens, Yellow
4 A2109-3 Gasket
5 5a LP1680 Lamp, 32 C.P., 6v
5b LP1683 Lamp, 32 C.P., 28V
5c GE1777 Lamp, 26 C.P., 12.8V
5d MS35478-315 Lamp, 32 C.P., 28V
6 A3510 Base & Lampholder Assembly
6 7 A2351-1 Terminal
8 A2353A Terminal Guide
9 A1783 Spring
10 A4149 Insulator
7
11 A1111 Nut
8

10
11
We never stop looking for new processes, products and methods
Our Research and Development teams are constantly evaluating new light sources,
from metal halide high intensity discharge lamps to
micro-processor-based “smart” landing lights.

© 2000 HONEYWELL INTERNATIONAL INC. 7

Tail Position Lights EXTERIOR LIGHTING

36260 TAIL POSITION LIGHT

FAA-TSO-C30b
Used on Jetstream 41
Dual lamp design for dispatch reliability
Colored lenses also available
Explosion proof per MIL-STD-810, Method 511, procedure I

SPECIFICATIONS
Weight: 0.50 lbs. Length 3.88 x Width 1.75 x Height 3.06 inches.

ITEM PART NUMBER DESCRIPTION

1a A7916 Retainer (-1, -2, -6, -12, -13)
1b A7916-1 Retainer (-11)
1c A7913-1 Retainer (-7, -8, -9, -10)
1 1d 31-0402-1 Retainer (-3, -4, -5, -15)
2a A4513-1 Lens: Clear
2 2b A4513-2 Lens: Red
3 2c A4513-5 Lens: Yellow
3a A2109-6 Gasket
3b A2109-3 Gasket (-11)
4 3c A2109-9 Gasket (-12, -13)
4a LP1680 Lamp, 6V (-4)
4b LP1683 Lamp, 28V
5 4c MS35478-307 Lamp, 28V (-15)
5a A7909A Base Assy. (-1, -2, -6, -12, -13)
5b 16054 Base Assembly (-7, -8, -9, -10)
5c 16054-1 Base Assy. (-3, -4, -5, -11, -15)
5d 16054-3 Base Assy (-14)

8 © 2000 HONEYWELL INTERNATIONAL INC.

EXTERIOR LIGHTING Tail Position Lights

30-2368 TAIL POSITION LIGHT

Meets requirements of FAA-TSO-C30c Type III rear position lights
1 Used on Gulfstream GIV, GV
Lightweight, vibration-isolated assembly
Utilizes a 2000 hour halogen lamp
2
3 SPECIFICATIONS
Weight: 0.26 lbs. Length 3.40 x Width 2.00 inches.

4
ITEM PART NUMBER DESCRIPTION
1 MS35206-216 Screw, #4-40 x 7/16”
2 10451-23 Lens, Avn. White Non-diffusing Clear
5 3 A8942-1 Gasket
4 55-2181-7 Lamp, 28V, 35W, 1.35 Amps, 50MSCP
5 31-0116-1 Retainer

30-0551 TAIL POSITION LIGHT

Used on Cessna Citation I, II, III, and 550/560
Lightweight, dual tail light assembly
Flashtube anti-collision light kit also available

1 SPECIFICATIONS
Weight: 0.55 lbs. Length 3.80 x Width 1.75 x Height 1.00 inches.
2
3
ITEM PART NUMBER DESCRIPTION
1 A7913-5 Lens Retainer
4 2 A4513-1 Lens
3 A7914-1 Gasket
5
4a MS36478-1683 Lamp, 28V
4b MS35478-1073 Lamp, 12.8V
5 A9669A3 Gasket
not shown 30-0552-3 Kit (Flashtube Light Assembly)

© 2000 HONEYWELL INTERNATIONAL INC. 9

Tail Position Lights EXTERIOR LIGHTING

30-0516 TAIL POSITION LIGHT

FAA-TSO-C30b
Used on Aerocommander 520, 560;
Beech A56, A60, A65, B50, B55, C50, C90, D50, D95;
Cessna T33, 310, 320, 336, 337, 340, 401, 402, 411, 414, 421 & Mitsubishi MU-2
Type II Rear Position Light
Dual function assembly provides both rear strobe & rear position light requirements

SPECIFICATIONS
Weight: 0.72 lbs. Length 3.91 x Width 2.54 inches.

1 ITEM PART NUMBER DESCRIPTION

1 31-1781-1 Retainer
2
2a / b 22876-25 / -27 Lens / (30-0516-9 & 30-0516-11 only)
3a / b 633 / 678 Lamp 13V, 1.52 Amp / 28V, 0.8 Amp
3 4 31-1780-1 Gasket
4 5 55-0206-13 Screw #4-40x1/4”
5 6a 31-1748-1 Light Subassembly (30-0516-1 & -3)
6b 31-1748-3 Light Subassembly (30-0516-5 & -7)
6 6c 31-1748-7 Light Subassembly (30-0516-9 & -11)

30-2382 TAIL POSITION LIGHT

Meets requirements of FAA-TSO-C30b for Type III rear position lights
1
Used on Lear 45, Cessna Citation X
Utilizes the same 1200-hour lamp as our 30-2366 position lights
2
3
SPECIFICATIONS
Weight: 0.25/0.28 (-7 only) lbs. L 2.17 x W 1.67 x H 1.22 exposed/2.20 recessed in.
4

ITEM PART NUMBER DESCRIPTION

1 A2108 Retainer
2 A4513-1T Lens
3 A2109-6 Gasket
4a / b 55-2181-7 / 55-2471-1 Lamp (-1, -3, -5) / Lamp (-7)
n/s n/a No. 6-32 Terminal Screws
5 5 60-2517-1 Boot

10 © 2000 HONEYWELL INTERNATIONAL INC.

EXTERIOR
PRODUCT FAMILY
LIGHTING Product
Floodlights
Category

30-2397 RECOGNITION FLOODLIGHT

Used on Gulfstream GIV, GV
2000 hour halogen lamp provides 17,000 candle power in an 8x8 beam spread
Lightweight unit designed for installaion in the wing tip as a recognition light

1 SPECIFICATIONS
Weight: 0.27 lbs. Length 3.77 x Width 3.35 x Height 1.85 inches.
2
3

ITEM PART NUMBER DESCRIPTION

4 1 25-1764-23 Lens
5 2 55-2181-7 Lamp 28V, 35W
3a 60-4962-1 Clip (side)
3b 60-4962-3 Clip (end)
4 MS51957-25 Screw #6-32
6
5 31-7918-1 Housing, Reflector
6 LH-138 Lampholder

L ighting & Electronics has designed and manufactured

aircraft lighting products for more than 70 years. We have
developed complete systems for virtually every
configuration of fixed-wing and rotary aircraft.

From tail navigation strobes to cockpit lights...

Windshield wiper systems to passenger information signs...

We provide the interior and exterior systems that light up the

sky.
Honeywell Lighting & Electronics’ production
facility and administrative offices located in
Urbana, Ohio.

© 2000 HONEYWELL INTERNATIONAL INC. 11

Product Category
Anti-Collision Navigation Lights EXTERIOR
PRODUCTLIGHTING
FAMILY

30-1085 ANTI-COLLISION & NAVIGATION LIGHT

FAA-TSO-C30b
Used on Citation II, III, Cessna 414, 421, 425, 441, 550 & 560;
Piper Navajo 31-310, 31-325 & Chieftain 31-350; IAI Westwind
Explosion proof per MIL-STD-810, method 511, procedure I
Exceeds anti-collision light requirements per FAR 23
Available with forward & aft facing incandescent position and
strobe lights

SPECIFICATIONS
1 3 Weight: 1.27 - 1.93 lbs. Length 10.00 x Width 2.62 x Height 3.36 in.

ITEM PART NUMBER DESCRIPTION

1 25-0869-23 Lens
2
2 31-3699-1 Retainer
12 3 31-3700-1 Retainer
13 4 31-3172-11 Strobe Light Assy.
5 31-3701-1 Support
14 6 MS35206-227 Screw, Machine
7 MS24693S25 Screw, Machine
15 4 8 MS35489-6 Grommet
16 5 9 MS3106R10SL3P Connector
6 7 -10 30-0009-42 Light Assy. (Avn. Red)(use on -1)
17 -11 30-0009-43 Light Assy. (Avn. Green)(-2)
8 12 MS24693S30 Screw, Machine
19 13 31-0745-1 Shield
9
14a / b A1280-2 / -3 Lens, Avn. Red / Avn. Green
15 A1257A Gasket
20 16a 628 Lamp, 26.5V
21 16b A7512-24 Lamp, 28V
22 17 MS24693S27 Screw, Machine
-18 30-0009-33 Base Assembly (includes 20-24)
23 19 30-0009-23 Base Assembly
25
20 A4490-3 Terminal Assembly
24 26 21 A1783 Spring
22 A4149 Insulator
23 A1111 Conduit Nut
24 31-3697-1 Gasket
25 MS35206-227 Screw, Machine
27
26 31-3742-1 Plate
- indicates item not illustrated 27 31-3695-1 Mounting Plate Assembly

12 © 2000 HONEYWELL INTERNATIONAL INC.

EXTERIOR LIGHTING Anti-Collision Navigation Lights

30-2140 NAVIGATIONAL LIGHT

Used on Citation II, Citation 550/560, Gulfstream GV
Flashing Navigational Light designed for ground operations
Utilizes a long life 2000 hour halogen lamp
Self-contained unit

SPECIFICATIONS
Weight: (-1) 2.50 lbs., (-3) 1.98 lbs., (-7 & -9)1.60 lbs. Length 9.96 x Width
1 3
2.385 exposed, 2.25 installed inches. Lamp 28V, 150W.
2

4 ITEM PART NUMBER DESCRIPTION

5 1 13731-3 Screw
2 D9961-3 Cover (Red)
3 12613-1 Lens Retainer
4 10638 Gasket
5 LP1982SP Lamp

30-2647 FLASHING ANTI-COLLISION BEACON

Used on Beech, Cessna, Gulfstream, Lear, Jetstream & Falcon aircraft
currently using a Grimes oscillating beacon
FAA-TSO-C96a
No moving parts!
Lightweight unit designed to replace the original Grimes oscillating
beacons used on a variety of aircraft
Utilizes a 1200-hour halogen lamp
1

SPECIFICATIONS
Weight: 1.06 lbs. Length 10.00 x Width 2.37 x Height 3.00 inches.
2

3
ITEM PART NUMBER DESCRIPTION
1 MS51957-25 Screw #6-32 x 2/16”
2 31-8744-1 Lens Assembly
4 3 55-2489-1 Lamp, 28V, 150W
4 31-8815-1 Circuit Card Assembly

© 2000 HONEYWELL INTERNATIONAL INC. 13

Product Category
Navigational Position Lights EXTERIOR
PRODUCTLIGHTING
FAMILY

30-1617 NAVIGATIONAL POSITION LIGHT

Used on Beech Starship
U-shape flashtube
Explosion proof: MIL-STD-810, method 511, procedure II
Exceeds anti-collision light requirements in accordance w/ FAR 23

SPECIFICATIONS
Weight: 0.92 lbs. Length 4.09 x Width 1.84 x Height 5.52 inches.

ITEM PART NUMBER DESCRIPTION

1 1 25-0809-23 Lens
3 2 2 MS51957-27 Screw
5 4 3 31-3072-1 Housing
4a / b A1280-2 / -3 Lens, Avn. Red/Avn. Green
7 6 5 31-3375-1 Retainer
8 6 A7512-24 Lamp, 28V, 26W
7a / b 31-3078-19 / -21 Flashtube Assembly
8 A1257A3 Gasket

30-2678 NAVIGATIONAL POSITION LIGHT

Used on SJ30-2
Part of 30-2736 integrated wing tip assembly
Designed to meet the applicable requirements of FAA-TSO-C30c
New, unique design features a “remove & replace” flashtube to reduce maintenance
time and cost
Long-life 1200-hour halogen lamp provides required position lighting

1 SPECIFICATIONS
2 Weight: 0.99 lbs. Length 6.18 x Width 1.94 x Height 2.20 inches.
3
ITEM PART NUMBER DESCRIPTION
4 1a / b 31-8866-1 / -2 Lens Assembly (Avn. Red / Avn. Green)
2 31-4065-1 Gasket
3 31-8859-1 Strobe Light Assembly
4 55-2471-1 Lamp, 26.5V, 40W
5
5 31-8864-1 Base Assembly

14 © 2000 HONEYWELL INTERNATIONAL INC.

EXTERIOR
PRODUCT FAMILY
LIGHTING Navigational
Product
Position
Category
Lights

30-1329 NAVIGATIONAL POSITION LIGHT

Used on Beech Baron, King Air & Super King Air
Combination position & strobe light
Designed for installation in the wing tip behind the wing fairing
Exceeds the minimum anti-collision light intensity and distribution requirements per
FAR 23 & 25

SPECIFICATIONS
Weight: 3.50 lbs. Length 10.25 x Width 3.46 x Height 4.56 inches.

ITEM PART NUMBER DESCRIPTION

1 NAS388-6-16 Screw #6-32 x 1”
2 A6177 Lens Retainer
3a A1280-1 Lens, Clear
3b A1280-2 Lens, Red
3c A1280-3 Lens, Green
4 A1257A Gasket
5 628 Lamp, 28V
6 A1825 Lampholder Assembly
7 31-4566-1 Light Subassembly
8 30-1414 Recognition Light
9 LP1982SP Lamp
10 25-0907-23 Lens
11 31-3902-1 Lens Retainer
12 55-0221-1 Flashtube 1
13 25-0491-1 Lens
14a / b 31-4851-1 / 31-4852-1 End Plates 2
3
14
4
5
13
12
6

Lighting & Electronics 11

employees are dedicated
to excellence. 7
10 9 8

© 2000 HONEYWELL INTERNATIONAL INC. 15

Product Category
Integrated Wing Tip Assemblies EXTERIOR
PRODUCTLIGHTING
FAMILY

HONEYWELL’S DEDICATION TO EXCELLENCE

Our people are always willing to do whatever is necessary
to provide the best lighting application possible...advanc-
ing the state-of-the-art to assure that every light, on every
aircraft, is a ‘Grimes’ light. That’s why it’s not unusual to
find our engineers and sales representatives in customers’
buildings at midnight or 1 am, participating in testing
emergency lighting systems to assure compliance to all
FAA regulations.

Our reputation for high performance is second to none.

Put us to the test - see how our design and development
expertise, complete in-house test facilities, advanced
operating systems and unparalleled customer support can
turn your vision rosier.

Photometric testing lab measuring the luminous

intensity of a dual wing-tip strobe light.

Honeywell Lighting & Electronics is a world leader in integrated wing tip design

Current wing tip designs include 737NG, 757, 777 & SJ30-2

Integrated wing tip reduces manufacturing time as lights are fully integrated
assembly needs only to be bolted to the wing

Let our engineers design your next wing tip into a fully integrated assembly

30-2736 INTEGRATED WING TIP ASSEMBLY

Designed for SJ30-2

30-2678 light assembly included (see page 14)
Required navigation lights & lens assemblies designed and integrated
into the wing tip assembly

SPECIFICATIONS
Weight 3.2 pounds maximum
Length 22.13 x Width 2.56 x Height 8.30 inches

16 © 2000 HONEYWELL INTERNATIONAL INC.

EXTERIOR
PRODUCT FAMILY
LIGHTING Product
Strobe
Category
Lights

30-0538 STROBE LIGHT

FAA-TSO-C30b
Used on BAe 125 Series
Combines a white strobe light and required color-coded navigation light
Utilizes a heat resistant glass lens (class B, per MIL-C-7989, color per MIL-C-25050)
Light coverage meets the requirements of FAR 23.1385
Strobe light intensity of 100 effective candle power minimum
Navigation Light lamps available w/ input voltages from 12V - 28V

SPECIFICATIONS
Weight: 0.44 lbs. Length 3.87 x Width 1.75 x Height 4.43 inches.
1

2 ITEM PART NUMBER DESCRIPTION

3 1 25-0593-23 Lens
2a / b A1280-2 / -3 Lens, Red / Green
4 3 31-2060-1 Retainer
4a A7512-12 Lamp, 14V, 26W
5 4b A7512-24 Lamp, 28V, 26W
6 4c 628 Lamp, 26.5V, 26W
5a 31-2059-11 Light Subassembly (30-0538-7, -8)
5b 31-2059-1 Light Subassembly (-1, -2, -3, -4, -14, -15)
7
6 A1257A Gasket
7 31-1795-1 Base Assembly

30-1136 STROBE LIGHT

Used on Falcon 10, 50, 900, 900EX and IAI Astra, 1125 Westwind and Galaxy
Lightweight fuselage or empennage mounted strobe light assembly
Exceeds minimum anti-collision light intensity & distribution reqt’s of FAR 23 & 25
Explosion proof per MIL-STD-810, method 511, procedure II
1 2
SPECIFICATIONS
Weight 1.32 lbs. Length 10.2 x Width 2.41 x Height 2.66 inches.

ITEM PART NUMBER DESCRIPTION

1 31-4036-1 Light Subassembly
2 31-4175-3 Lens Assembly

© 2000 HONEYWELL INTERNATIONAL INC. 17

ProductLights
Strobe Category EXTERIOR
PRODUCTLIGHTING
FAMILY

30-1621 STROBE LIGHT

Used on Citation 650
Designed for installation in the wing tip to provide 360° field of coverage
Exceeds minimum anti-collision light intensity & distribution reqt’s of FAR 23 & 25
Explosion proof per requirements of MIL-STD-810, method 511, procedure II

SPECIFICATIONS
Weight: 0.60 lbs. Length 5.5 x Width 2.18 x Height 3.12 inches.
1
2
ITEM PART NUMBER DESCRIPTION
3 1a 31-5300-1 Lens Assembly, Clear (-1, -3)
1b 31-5300-3 Lens Assembly, Aviation Red (-5)
4
2 MS24693S26 Screw #6-32 x 3/8”
3 55-1473-3 Flashtube
4a 31-5310-1 Light Subassembly (-1)
4b 31-5310-3 Light Subassembly (-3, -5)

30-0876 STROBE LIGHT

FAA-PMA
Used on Ayres Loadmaster Mitsubishi MU-1, MU-300
Lightweight aerodynamic unit designed for installation on exterior of the wing tip with
minimal penetration of the aircraft skin
Lens covers are one piece heat resistant glass available in aviation red or white
Constructed to meet explosion proof requirements of MIL-STD-810, method 511

SPECIFICATIONS
1 Weight: 0.70 lbs. Length 2.68 x Width 1.81 x Height 2.58 inches.
2
3
ITEM PART NUMBER DESCRIPTION
4 1 NAS1096-1-6 Screw No. 6-32x3/8”
2 31-3168-1 Retainer
5 3 25-0767-23 Lens, Aviation White
4 31-3173-3 Gasket
5 31-3172-43 Flashtube Assembly

18 © 2000 HONEYWELL INTERNATIONAL INC.

EXTERIOR
PRODUCT FAMILY
LIGHTING Product
Strobe
Category
Lights

30-1331 STROBE LIGHT

Used on Beech A100, B100, BE200, F33, B55 & B60
Lightweight unit designed for installation in a wing tip cutout and/or in the tail cone
Utilizes “remove and replace” flashtube, parabolic reflector & aviation white lens
Exceeds minimum anti-collision light intensity & distribution reqt’s of FAR 23 & 25
Explosion proof requirements of MIL-STD-810, method 511, procedure II
2 1

SPECIFICATIONS
Weight: 0.70 lbs. Length 4.5 x Width 2.95 x Height 2.02 inches.

3
ITEM PART NUMBER DESCRIPTION
1 25-0491-1 Cover
2 55-0221-1 Flashtube
3a 31-3792-7 Light Subassembly (-1, -3, -5)
3b 31-3792-15 Light Subassembly (-7, -9)
4
4a 31-3920-1 Bracket (-1, -3, -5)
4b 31-3908-1 Bracket (-3 only)
4c 31-3909-1 Bracket (-5 only)

30-1994 STROBE LIGHT

Used on Gulfstream GII, GIII, GIV
Designed for installation in a wing tip cutout, and/or in the tail cone
Consists of a “remove and replace” flashtube, parabolic reflector and aviation white
lens; mounted in a rectangular housing
Exceeds minimum intensity and distribution req’ts of FAR 25.1401, amendment 25-41
4 3 2 1 Explosion proof requirements of MIL-STD-810, method 511, procedure II

SPECIFICATIONS
Weight: 0.80 lbs. Length 4.50 x Width 2.02 x Height 2.98 inches.

ITEM PART NUMBER DESCRIPTION

1 25-1375-1 Lens, Clear
2 55-0221-11 Flashtube
not shown 31-6947-1 Trigger Clip
3 MS51863-21 Screw, No.6-32x1/4” LG PAN HD STL Type TT
4 MS35206-228 Screw, No.6-32x3/8” LG PHIL HD STL

© 2000 HONEYWELL INTERNATIONAL INC. 19

ProductLights
Strobe Category EXTERIOR
PRODUCTLIGHTING
FAMILY

30-2446 STROBE LIGHT

Used on Gulfstream GV
Lightweight dual flashtube unit installs in a wing tip cutout and/or in the tail cone
Utilizes two “remove and replace” flashtubes for dispatch reliability. When used
with the 60-4943 power supply, the secondary flashtube will illuminate if the primary
flashtube fails, providing system redundancy
Exceeds minimum anti-collision light intensity & distribution reqt’s of FAR 23 & 25
Explosion proof per requirements of MIL-STD-810, method 511, procedure II

1 SPECIFICATIONS
2 Weight: 1.53 lbs. Length 5.53 x Width 3.03 x Height 3.30 inches.

3 ITEM PART NUMBER DESCRIPTION

1 31-8021-1 Lens Assembly
2 55-2293-1 Flashtube
3 31-8023-1 Light Subassembly

30-2273 STROBE LIGHT

Used on Beech 1900
Designed for installation on exterior of the wing tip to provide 360° field of coverage
Exceeds minimum anti-collision light intensity & distribution reqt’s of FAR 23 & 25
Explosion proof per requirements of MIL-STD-810, method 511, procedure II
1

2 SPECIFICATIONS
Weight: 0.86 lbs. Length 7.66 x Width x 1.84 x Height 1.75 inches.

3
ITEM PART NUMBER DESCRIPTION
1 31-3929-1 Lens Retainer
4
2 25-0908-21 Lens
3 55-2199-3 Flashtube
4 31-8438-1 Light Subassembly
5 5 31-7375-3 Cable Assembly (-3 & -7)

20 © 2000 HONEYWELL INTERNATIONAL INC.

EXTERIOR LIGHTING Strobe Power Supplies

60-2799 STROBE POWER SUPPLY

FAA-PMA
Used on Cessna 414, 421, 425, 441 & Citation 550, 560; IAI Westwind
Lightweight strobe power supply
Flashrate 50 + 10 per minute
Explostion proof per MIL-STD-810, method 511, procedure II

SPECIFICATIONS
Weight: 2.70 lbs. Length 5.6 x Width 5.0 x Height 3.03 inches.

60-3742 STROBE POWER SUPPLY

Used on Cessna 650 series
Provides strobe light timing pulses 50+5 pulses per minute
Output power 34+2 Joules
Explosion proof per MIL-STD-810, method 511, procedure II

SPECIFICATIONS
Weight: 3.00 lbs. Length 7.37 x Width 4.37 x Height 2.54 inches.

60-4943 STROBE POWER SUPPLY

Used on Gulfstream GV
Lightweight unit with a flashrate of 47 + 5 flashes per minute
Explosion proof per MIL-STD-810, method 511, procedure II
Use with 30-2446-1 Strobe Light

SPECIFICATIONS
Weight: 2.60 lbs. Length 4.50 x Width 4.53 x Height 4.46 inches.

© 2000 HONEYWELL INTERNATIONAL INC. 21

Flasher - Landing Lights EXTERIOR LIGHTING : ELECTRO-MECHANICAL

70-0196 SOLID STATE FLASHER

FAA-PMA
Used on Cessna 650 series & Piper Cheyenne series
28 VDC input 1.0 to 5.5 Amps
Flash rate 85+10 flashes per minute

SPECIFICATIONS
Weight 0.70 lbs. Length 2.90 x Width 2.12 x Height 2.00 inches.

LANDING & TAXI LIGHTING PRINCIPLES

SEALED BEAM LAMPS
Lighting performance, output distribution and intensity, is dependent on
the sealed beam lamp design and construction. Design and construction
features include bulb size, filament configuration and orientation with
respect to the reflector, glass lens surface and color, and resultant elec-
trical parameters. Hermetically sealed beam parabolic reflector (PAR)
type lamps are designated by a number signifying bulb size equivalent to
1/8 diameter. See chart below regarding Landing & Taxi Lights included
in this catalog.

PAR Number Depth Diameter Using a digital camera, a Grimes technician records
& stores the image of a problem helicopter search
(inches) (inches) light on a PC. The image is then color plotted, print-
PAR 46 4 5 3/4 ed or e-mailed for analysis. By examining repair
2 3/4 trends, we can be proactive both in determining
PAR 36 4 1/2
potential parts problems and in designing solutions.

45-0395 SOLID STATE RELAY

Replaces electro-mechanical lamp relay assembly used on various
landing & search light applications (G5400)
No moving parts to wear out!
Highly reliable solid-state electronics
Easy to field retrofit
Kits available to facilitate field installation on various aircraft platforms

SPECIFICATIONS
Weight 0.25 lbs. 28 VDC only, 97 Amp nominal load current, 180 Amp inrush limit.

22 © 2000 HONEYWELL INTERNATIONAL INC.

ELECTRO-MECHANICAL Retractable Landing & Search Lights

45-0148 RETRACTABLE LANDING LIGHT

PAR 46
Used on Cessna 421/425/441, Citation I/II
Flush mounting

SPECIFICATIONS
Weight: 4.40 pounds. Length 11.75 x Width 6.60 x Depth 3.25 inches.

45-0350 RETRACTABLE LANDING LIGHT

Used on Cessna 650
New Micro-processor controlled landing light
Self-diagnostic circuit checks for proper operation
In event of jammed condition, automatic shutdown prevents damage
Automatic light angle repositioning
Form-fit replacement for the 45-0213-1/-3 assemblies

SPECIFICATIONS
Weight: 6.00 pounds. Length 10.5 x Diameter 8.00 inches x Depth 4.5 inches.

45-0339 HELICOPTER SEARCH LIGHT

Par 46, 450 Watt lamp
Replaces Grimes’ original G6250-4 & 45-0128-1 search lights installed on Bell 212,
214, 222 & 412 helicopters
New solid state circuitry
Sealed gear box with improved lubrication
Metal vs. plastic gears
“Remove and replace” relays facilitate field maintenance

SPECIFICATIONS
Weight: 6.62 pounds. Length 12.12 x Width 6.35 x Height 4.18 inches.

© 2000 HONEYWELL INTERNATIONAL INC. 23

Fixed Landing & Taxi Lights EXTERIOR LIGHTING

D7585 FIXED LANDING & TAXI LIGHT

FAA-PMA
PAR 46
Used on Cessna Citation II, III, 550 & 560; Lear 31, 60
Equipped with mounting brackets permitting either vertical or horizontal mounting
Available in a variety of configurations, providing a wide selection of mounting
arrangements, lamp beam spreads and intensities
Provisions for electrical connections are provided either by pigtail leads through
sealed connections or by AN or MS connectors

SPECIFICATIONS
1 Weight: 1.4 lbs. Length 5.9 x Width 5.9 x Height 3.8 inches.
2

ITEM PART NUMBER DESCRIPTION

3
1 MS35206-233 Screw
2 B6492 Lamp Retainer
3a LP4570 Lamp, Par 46
3b MS25241-4553 Lamp, Par 46
4 3c MS25241Q4681 Lamp, Par 46
4 B9185-11 Canopy Assembly

Coming Soon...
50-0292 LANDING / TAXI LIGHT

Replaces current PAR 36 assemblies that use sealed beam lamps

Unique reflector design facilitates the use of a 2000-hour halogen
lamp that produces 98K candelas in landing mode and 34K
candelas in taxi mode

SPECIFICATIONS
Weight: 0.89 lbs. Length 4.75 x Width 4.75 x Height 2.43 inches.

24 © 2000 HONEYWELL INTERNATIONAL INC.

EXTERIOR LIGHTING Fixed Landing & Taxi Lights

50-0312 LANDING LIGHT

Used on Ayres Loadmaster LM200
New lightweight dual halogen lamp design
Utilizes two PAR 36 reflectors and two 1950 hour halogen lamps to provide 170,000
candle power illumination

SPECIFICATIONS
Weight: 0.75 lbs. Length 8.15 x Width 2.0 x Height 4.18 inches.

1
ITEM PART NUMBER DESCRIPTION
1 51-0783-1 Lamp Assembly (28V, 150W)
2 2 MS35206-227 Screws

B4150 / 50-0139 LANDING / TAXI LIGHT

FAA-PMA
PAR 36
Used on Beech A100, B100, BE200, F33, B55, B60, B76; Cessna 340, 402, 404, 414,
421, 425, 441; Challenger 600, 601, 604; IAI Westwind; Sino Swearingen SJ 30-2
Uses sealed beam lamps
Available in a variety of configurations, providing a wide selection of mounting
arrangements, lamp beam spreads and intensities
Provisions for electrical connections are provided either by pigtail leads through
sealed connections or by AN or MS connectors
Equipped w/ mounting brackets permitting either vertical and/or horizontal mounting
Alternatives include 50-0024, 50-0253, 50-0255; call for your best fit

SPECIFICATIONS
Weight: 0.89 lbs. Length 4.75 x Width 4.75 x Height 2.43 inches.
1
2
3 ITEM PART NUMBER DESCRIPTION
1 B4209 Retainer Ring
2 51-0078-1 Gasket
3a GE4596 Lamp, 28V, 250W
4
3b GE4587 Lamp, 28V, 250W
3c LP4626 Lamp, 28V, 150W
4 B4213B Canopy Assembly

© 2000 HONEYWELL INTERNATIONAL INC. 25

Product
Wing Inspection
CategoryLights EXTERIOR
PRODUCTLIGHTING
FAMILY

30-1011 WING INSPECTION LIGHT

FAA-PMA
Used on DHC-7
Designed to illuminate the wing leading edge for ice detection
Lightweight flush mount design

SPECIFICATIONS
Weight: 0.35 lbs. Width 2.93 x Depth 1.97 inches.

1
2
ITEM PART NUMBER DESCRIPTION
3 1 MS24693S28 Screw, #6-32 x 1/2”
4 2 31-0824-1 Lens Assembly
5 3 A7079B24 Lamp, 28V, 40W
4 31-3526-1 Housing Assembly
6 5 MS35206-226 Screw, #6-32 x 1/4”
7 6 MS35338-41 Lockwasher
7 BT130 Boot

30-0661 WING INSPECTION LIGHT

Used on Citation 550/560 series
Designed to illuminate the wing leading edge for ice detection
Lightweight flush mount design

SPECIFICATIONS
Weight: 0.75 lbs. Length 5.50 x Width 5.50 x Height 2.00 inches. Lamp 28V, 40W.
1
2
3 ITEM PART NUMBER DESCRIPTION
1 MS35206-226 Screw #6-32 x 1/4”
4 2 31-2345-1 Lens Assembly
3 A7079B24 Lamp
4 31-2344-1 Housing Assembly

26 © 2000 HONEYWELL INTERNATIONAL INC.

PRODUCT FAMILY
EXTERIOR LIGHTING Wing Product
Inspection
Category
Lights

30-1451 WING INSPECTION LIGHT

Used on Gulfstream GIII, GIV
Designed to illuminate the wing leading edge for ice detection
Lightweight flush mount design

SPECIFICATIONS
Weight: 0.75 lbs. Width/Diameter 5.50 x Depth 2.50 inches.

1
2 ITEM PART NUMBER DESCRIPTION
1 MS24693S28 Screw, #6-32 x 1/2 LG
3 2 31-0871-1 Lens Assembly (Contoured Lens)
3 A7079B24 Lamp, 28V, 40W
4
4a 31-4888-1 Light Subassembly (LH)
4b 31-4888-2 Light Subassembly (RH)

30-2369 WING INSPECTION LIGHT

Used on Gulfstream GV
Designed to illuminate the wing leading edge for ice detection
Lightweight flush mount design
Utilizes long-life halogen lamp to provide required lighting

SPECIFICATIONS
Weight: 0.88 lbs. Width/Diameter 5.50 x Depth 2.60 inches.

1 ITEM PART NUMBER DESCRIPTION

2
3 1 MS24693-S28 Screw, #6-32 x 1/2 LG
2 31-0871-1 Lens Assembly (Contoured Lens)
3 55-2181-7 Lamp, 28V, 35W
4 4a 31-8117-1 Light Subassembly (LH)
4b 31-8117-2 Light Subassembly (RH)

© 2000 HONEYWELL INTERNATIONAL INC. 27

Logo Lights EXTERIOR LIGHTING

30-2351 LOGO LIGHT

Used on Jetstream 41, Ayres Loadmaster, Bombardier Global Express
Lightweight flush mount design
Utilizes a 700-hour halogen lamp to light the vertical tail of the aircraft

SPECIFICATIONS
Weight: 1.40 lbs. Length 3.15 x Width 4.72 x Height 4.00 inches. Lamp: 28 V, 150 W.

ITEM PART NUMBER DESCRIPTION

1 60-2517-1 Boot
1 2 MS35206-227 Screw
2 3a LH138 Lampholder Assembly, Single Contact
3 3b LH139 Lampholder Assembly, Dual Contact
4a LP1987 Lamp, 28V, 150W
4b 55-2535-1 Lamp, 28V, 112W (30-2351-3 only)
4
4c LP1982SP Lamp, 28V, 75W
5 5 31-7653-13 Lanyard Assembly
6 6 31-7969-1 Lens Assembly

30-2445 LOGO LIGHT

Used on Gulfstream GV
Flush mount design
Features an integral transformer for 115V input
Utilizes a 700-hour halogen lamp to light the aircraft vertical stabilizer

SPECIFICATIONS
Weight: 1.40 lbs. Length 8.00 x Width 5.50 x Height 4.50 inches.

1 ITEM PART NUMBER DESCRIPTION

1 MS25171-2S Boot
2 2 LP1987 Lamp 28V, 150W
4 3 31-7860-1 Lens Assembly
3 4 55-2265-1 Transformer

28 © 2000 HONEYWELL INTERNATIONAL INC.

EXTERIOR LIGHTING Emergency Exit Lights

30-1791 EMERGENCY EXIT LIGHT

Used on IAI Westwind, Astra & Galaxy
Explosion proof per MIL-E-5272 C, paragraph 4.13.5, procedure III
Lightweight unit designed to be installed on the aircraft exterior to provide six volt
illumination at aircraft exits during loss of primary power

SPECIFICATIONS
Weight: 0.89 to 1.29 lbs. Length 4.90 x Width 4.90 x Height 2.43 inches.

ITEM PART NUMBER DESCRIPTION

1 31-5928-1 Lens Assembly (-1)
1a 31-5928-2 Lens Assembly (-2, -8)
1 1b 31-5928-3 Lens Assembly (-3)
2 1c 31-5928-5 Lens Assembly (-5)
1d 31-5928-6 Lens Assembly (-6)
1e 31-5928-7 Lens Assembly (-7)
2 GE-1317 Lamp, 6V
3 3 31-5926-1 Housing Assembly (-1, -2)
3a 31-5926-3 Housing Assembly (-3)
3b 31-5926-5 Housing Assembly (-5)
3c 31-5926-6 Housing Assembly (-6)
3d 31-5926-11 Housing Assembly (-7)

30-1767 EXIT LIGHT

Used on Citation 525, 650, 750; Gulfstream GIV, GV
Explosion proof per MIL-E-5272 C, paragraph 4.13.5, procedure III
Lightweight unit designed to be installed on the aircraft exterior to provide
illumination at aircraft exits

SPECIFICATIONS
Weight: 0.10 lbs. maximum. Length 2.20 x Width 1.50 x Height 1.11 inches.
1

2 ITEM PART NUMBER DESCRIPTION

1 16-1428-1 Reflector
3 2 MS15573-3 Lamp, 28V, 17 Amps
3 31-5843-1 Lens Assembly

© 2000 HONEYWELL INTERNATIONAL INC. 29

Product Category
Floodlights INTERIOR
PRODUCTLIGHTING
FAMILY

10-0688 FLOODLIGHT
FAA-PMA
Used on Bell 212, Canadair Challenger, Piper Cheyenne III, Citation II
Lightweight, compact design
To provide flood lighting in a variety of locations, utilizes a 6 or 28VDC lamp

SPECIFICATIONS
Weight: 0.22 lbs or 0.53 lbs. for -15, -17, -19 and -21. Length 3.59 x Weight 2.56 x
Height 1.61 inches.

1
ITEM PART NUMBER DESCRIPTION
1 11-2724 Housing
2a GE2233 Lamp, 28V
2
2b GE1317 Lamp, 6V
3 3 11-2722-3 Lens Assembly

30555 FLOODLIGHT
Used on Gulfstream GIV, SJ30-2
Dual lamp feature provides redundancy
Provides flood lighting in a variety of locations utilizing two 28VDC lamps
Lightweight flush mount design

1 2 3 4
SPECIFICATIONS
Weight: 0.50 lbs. Length 6.65 x Weight 1.82 x Height 1.56 inches.

ITEM PART NUMBER DESCRIPTION

1a 16-0110-1 Housing Assembly, Basic (-1, -9)
1b 16-0110-5 Housing Assembly (-3, -5, -7)
1c 16-0110-11 Housing Assembly (-11)
2 MS15570-623 Lamp, 28V
3a B5846 Lens Assy. Clear Prismatic (-1, -5, -7, -9)
3b B5846-1 Lens Assy. Clear Frosted, Basic (-3)
3c B5846-5 Lens Assy. Clear Prismatic (-11)
4 MS35190-238 Screw #6-32x1/2

30 © 2000 HONEYWELL INTERNATIONAL INC.

INTERIOR
PRODUCT LIGHTING
FAMILY Product
Floodlights
Category

15-0777 / 15-0748
SERVICE COMPARTMENT LIGHT
FAA-PMA
Used on Lear 45; Ayres Loadmaster
Lens heat resistant glass per MIL-C-7989
Uses the same mounting hole pattern as the 15-0143
An ideal small white floodlight designed for use in:
Cargo areas
APU/Tail Cone compartment bays
Wheel wells
E/E bays

1 SPECIFICATIONS
Weight: 0.26 lbs. Length 3.19 x Width 2.16 x Height 1.95 max inches. Lamp: 28V, 35W.
2

3 ITEM PART NUMBER DESCRIPTION

1 16-2467-5 Lens Assembly
2 55-2181-7 Lamp, 28V, 35W
3 16-2466-5 Light Assembly

30180B23D-1683 SERVICE LIGHT

FAA-PMA
Used on Gulfstream GIV; Lear 45; Challenger 600, 601 & 604
Lightweight compact design

SPECIFICATIONS
Weight 0.39 lbs. Length 3.9 x Width 2.16 x Height 2.00 inches.
1

2 ITEM PART NUMBER DESCRIPTION

1 16-0454-1 Cover Assembly
2 LP1683 Lamp, 28V
3
3 22754B Base Assembly

© 2000 HONEYWELL INTERNATIONAL INC. 31

Product
Dome Lights
Category INTERIOR
PRODUCTLIGHTING
FAMILY

B3550 / B3555A DOME LIGHT

FAA-PMA
Used on Mitsubishi MU-2P; Bell Helicopters; various Beech & Cessna
Lightweight aluminum assembly
Designed to provide recessed overhead lighting

SPECIFICATIONS
Weight: 0.28 lbs. Length 3.59 x Width 2.56 x Height 1.81 inches.

ITEM PART NUMBER DESCRIPTION

1 60-1672-1 Screw No. 6-32x1/2”
2 A5804 Knob Extension (B-3555A)
2 1
3a A3553 Retainer - Lens
3b A3553-2 Retainer - Lens (B-3550-5)
4 4 A3549A Retainer - Lens
3 5 60-1673-1 Spacer
5 6a MS15570-89 Lamp (G-6 Bulb, 13V, 6 C.P.)
6 6b MS35478-93 Lamp (S-8 Bulb, 13V, 15 C.P.)
7 6c MS35478-1141 Lamp (S-8 Bulb, 13V, 21 C.P.)
8 6d MS25238-301 Lamp (G-5 Bulb, 28V, 3 C.P.)
9 6e MS15570-303 Lamp (G-6 Bulb, 28V, 6 C.P.)
6f MS35478-305 Lamp (S-8 Bulb, 28V, 15 C.P.)
6g5 GE305IF Lamp (S-8 Bulb, 28V, 15 C.P.)
10
11 7a A3551 Diffusing Lens, White
12 7b A3551-1 Diffusing Lens, Red
7c A3551-2 Diffusing Lens, Clear
13 7d A3551-3 Non-diffusing Lens, Blue
8a A3554 Contact Assy. (B3555A)
8b A3554-3 Contact Assy. (-1, -7, -11)
8c A5598 Contact Assy. (-3, -5, -9, -13)
9 A3657A Gasket
10 60-0829-1 Bushing (B-3555A)
11a1 A3552 Reflector & Lampholder Assy.
1 Use on all B-3550A dash No.'s except -7 11b2 A3552-1 Reflector & Lampholder Assy.
2 Use on B-3550-7 only
3 Includes items 10&11 (Do not use on -1) 12a3 A3548A Reflector & Lampholder Assy.
4 Includes items 10&11 (On B-3555A-1 only) 12b4 A3548A-1 Reflector & Lampholder Assy.
5 Inside Frosted
13 A3594A Switch (B-3555A)

32 © 2000 HONEYWELL INTERNATIONAL INC.

INTERIOR
PRODUCT LIGHTING
FAMILY Product
DomeCategory
Lights

15-0129 DOME LIGHT

FAA-PMA
Lightweight 28 volt floodlight
Also available with white diffusing lens
Unique design requires no tools to replace lamp

1
SPECIFICATIONS
Weight: 0.34 lbs. Length 3.25 x Width 3.25 x Depth 1.25 inches.
2
ITEM PART NUMBER DESCRIPTION
3 1a B9842-4 Cover Assembly, Clear
1b B9842-1 Cover Assembly, Avn. White Diffusing
2 A9183-1 Lens Retainer
4
3 GE1665 Lamp, 28V
4 16-0490-1 Housing Assembly

34170 DOME LIGHT

FAA-PMA
Used on Bombardier Global Express; Challenger 600, 601, 604;
Gulfstream GIII, GIV; Learjet 54, 56, 60
Lightweight dome light assembly
Can be provided in single or double lamp configurations

SPECIFICATIONS
Weight: 0.50 lbs. Width/Diameter 4.75 x Depth 2.52 inches.
1

2 ITEM PART NUMBER DESCRIPTION

1 37230-2 Lens Retainer Assembly
2 MS15570-81 Lamp, 6.5V
3
3 37225-1 Housing Assembly
4 4 60-2517-1 Rubber Nipple

© 2000 HONEYWELL INTERNATIONAL INC. 33

Product Lights
Cockpit Category INTERIOR
PRODUCTLIGHTING
FAMILY

A6850 MAP LIGHT

FAA-PMA
Designed to provide illumination for the instrument panel

SPECIFICATIONS
Weight: 0.16 lbs. max. Length 2.72 x Width 1.13 inches.
1

ITEM PART NUMBER DESCRIPTION

2 1a 16-0255-1 Hood Assembly, Clear
1b 16-0255-3 Hood Assembly, Identification Red-Diffusing
1c 16-0255-5 Hood Assembly, White Diffusing
2 LP1495X Lamp, 28V
3 3 16-0256-3 Housing Assembly

A6745 POST LIGHT

Used on Bell 206, 212,214 & 230; Challenger 600, 601
Designed to provide illumination for the instrument panel
Red, white, clear, amber, green and NVIS lenses available

SPECIFICATIONS
Weight: 0.05 lbs. Length 1.52 x Width 0.485 inches.

1
ITEM PART NUMBER DESCRIPTION
1a A6747 Hood Assembly, Identification Red
2
1b A6747-1 Hood Assembly, Ident Red per MIL-L-5057
1c A6747-2 Hood Assembly, Clear
1d A6747-3 Hood Assembly, Aviation Red
3 1e A6747-4 Hood Assembly, Inst. White
1f A6747-5 Hood Assembly, Amber
4 1g A6747-8 Hood Assembly, Soft White
1h 21-0567-1 Hood Assembly, NVIS Blue/Green
1i 21-0567-9 Hood Assembly, NVIS Green A
2 MS25237-(*) Lamp (*varies with hood assembly chosen)
3 A6794 Lamp Housing
4 A5045 Nut

34 © 2000 HONEYWELL INTERNATIONAL INC.

INTERIOR
PRODUCT LIGHTING
FAMILY Product
Cockpit
Category
Lights

20-0121 INSTRUMENT POST LIGHT

Used on Cessna 550 & 560; Piper Cheyenne I, II & III; Sikorsky S76
Designed to provide illumination for the instrument panel
Red, white and clear lenses available

SPECIFICATIONS
Weight: 0.04 lbs. Length 2.03 x Width 0.485 x Height 0.402 inches.

1
ITEM PART NUMBER DESCRIPTION
1 60-1710-1 Hex Nut
2a MS25237-327 Lamp, 28V
2b MS25237-330 Lamp, 14V
2 2c MS25237-328 Lamp, 6V
3a 21-0230-3 Hood Assembly (Red)
3b 21-0230-5 Hood Assembly (Clear)
3
3c 21-0230-7 Hood Assy. (Avn. Red)
3d 21-0230-9 Hood Assy. (Inst. White)

36170 COCKPIT LIGHT

FAA-PMA
Used on Lear 24, 25, 28, 29, 31A, 35A, 54, 55 & 56; Gulfstream GIV & GV
Gooseneck cockpit light available in a variety of lengths
Features a rheostat for dimming control
1 2

SPECIFICATIONS
Weight: 0.67 lbs. Length 7.125 to 16.5 inches.

ITEM PART NUMBER DESCRIPTION

1a LP1495X Lamp, 28V
3 1b GE1816 Lamp, 13V
2a A5391 Hood (-9, -11, odds -15 through -29)
2b A6646 Hood, Basic (-1, -2, -3, -4, -5, -6, -7, -8)
3a / b / c A7109 / -2 / -4 Flexible Arm (7 1/ ”) / (9 5/ ”) / (16 1/ ”)
8 8 2

4 4 37809 Base
5 5a 20465-1 Rheostat, 13V
5b 20465-2 Rheostat, 28V

© 2000 HONEYWELL INTERNATIONAL INC. 35

Product Category
Spotlights INTERIOR
PRODUCTLIGHTING
FAMILY

15-0007 INCANDESCENT SPOTLIGHT

FAA-PMA
Cockpit utility red/white floodlight in various extension cord lengths
Can be provided with standard or off-set plug-in base

SPECIFICATIONS
Weight: 0.66 lbs. Length 3.63 x Width 1.19 x Height 4.2 inches with plug-in base.

ITEM PART NUMBER DESCRIPTION

1 16-0014-1 Lens Housing
1 2a GE1816 Lamp 13V, 0.33 Amps
2b / c MS25231-313 / -316 Lamp 28V, 0.17 Amps / 6V, 0.7 Amps
2 2d LP1495X Lamp 28V, 0.34 Amps
3 16-0021 Button Push
3 4 A8156-12 Base Mounting
4 5 A2812 Locking Device
6 A6690 Post
7 B7041 Cord Assembly
5 6 7 8 8 A7081-1 Knob Rheostat

40240-1385 WORK TABLE LIGHT

FAA-PMA
Used on Cessna 525, 550 & 560
Lightweight unit can be provided with clip assembly or plug-in mounting base

SPECIFICATIONS
Weight: 0.70 lbs. Length 4.65 x Width/Diameter 2.00 x Height 4.20 inches with plug-in
base.
1

ITEM PART NUMBER DESCRIPTION

1a / b MS35480-1 / -2 Lamp 13V / 28V
2 2 10735 Reflector & Lamp Housing Assembly
3 3 A7669-1 Bracket Assembly
4 4 A6693-4 Base Assembly
5 B7041-7 Cord
5

36 © 2000 HONEYWELL INTERNATIONAL INC.

INTERIOR
PRODUCT LIGHTING
FAMILY Emergency Exit
Product
Signs Category
& Lights

10-1097 EMERGENCY EXIT SIGN

Used on Cessna 650
Small, compact unit
Meets emergency lighting requirements of FAR 25.812

1 SPECIFICATIONS
Weight: 0.36 lbs. Length 6.50 x Width 2.00 x Height 1.00.
2

ITEM PART NUMBER DESCRIPTION

1 MS15573-3 Lamp, 28V
3 2a 25-1175-1 Lens, English
2b 25-1175-5 Lens, Portuguese
3 11-4814-1 Sign Subassembly

10-0055 EMERGENCY EXIT LIGHT

FAA-PMA
Used on Bell 205, 206, 212, 214, 222 & 230; Sikorsky CH-53; Casa 212
Lightweight light provides emergency lighting during loss of primary power
Mobile unit can be removed from mounting rack and carried by hand

SPECIFICATIONS
Weight: 0.94 lbs. Length 5.24 x Width 3.30 x Height 1.84 inches.

ITEM PART NUMBER DESCRIPTION

1 11-0500-1 Housing Assembly
2 PR2 Lamp, 2.38V
3 MS35237-327 Lamp, 28V (2 each)
1 4 MISC061 Battery (2 each)
5a / b / c 11-0480-1 / -3 / -5 Mounting Rack Assembly
2
3
4

© 2000 HONEYWELL INTERNATIONAL INC. 37

Product Category
Emergency Exit Power Supplies INTERIOR
PRODUCTLIGHTING
FAMILY

60-0304 EMERGENCY EXIT POWER SUPPLY

FAA-PMA
Used on BAe 125, Hawker 800/1000
Power supply designed to provide 20 minutes of 6 volt emergency power to
illuminate exit lights during loss of primary aircraft power
See CMMs 33-50-01(60-0304-3), 33-50-02(60-0304-31, -33, -51) for complete parts
breakdown & maintenance instructions

SPECIFICATIONS
Weight: 1.55 lbs. Length 6.74 x Width 3.86 x Height 1.96 inches.

60-1321 EMERGENCY EXIT POWER SUPPLY

FAA-PMA
Used on Beechjet; Canadair Challenger 600, 601 & 604
Power supply designed to provide 20 minutes of 6 volt emergency power to
illuminate exit lights during loss of primary aircraft power
See CMMs 33-50-11(60-1321-1), 33-50-42(60-1321-1, -5, -7, -1LB, -5LB, -7LB) for
complete maintenance instructions

SPECIFICATIONS
Weight: 3.50 lbs. Length 8.75 x Width 5.50 x Height 2.66 inches.

60-3844 EMERGENCY EXIT POWER SUPPLY

FAA-PMA
Used on Sino Swearingen SJ 30-2 & DHC-8
Power supply designed to provide 20 minutes of 6 volt emergency power to
illuminate exit lights during loss of primary aircraft power
See CMM 33-50-67(-1, -1LB, -3, -3LB) for complete maintenance instructions

SPECIFICATIONS
Weight: 3.60 lbs. Length 8.75 x Width 5.50 x Height 2.69 inches.

38 © 2000 HONEYWELL INTERNATIONAL INC.

PRODUCT FAMILY LENSES
Product &Category
LAMPS

A4513 LENS A9906 LAMP ASSEMBLY:

CONSOLE PANEL LIGHT
PART # DESCRIPTION
A4513-1 Clear Lens
A4513-2 Red Lens
A4513-3 Green Lens
A4513-5 Yellow Lens
A4513-1T Clear Lens

TYPE GG10 TYPE GG 12A1

TYPE GG12B1 LAMP 632, 633

ITEM LAMP NUMBER DESCRIPTION VOLTAGE WATTS

GG12B1 626 Reflector 6.2 40
GG10 628 Reflector 26.5 26
632 632 Tail Light 28 28.6
633 633 Reflector 12.8 19.5
GG10 1512 Reflector 14 21
GG10 1524 Reflector 28 21
GG12B1 11631 Reflector 6.2 40
GG12A1 16870 Reflector 6.2 40
GG12B1 A4174-12 Reflector 14 40
GG12B1 A4174-24 Reflector 28 40
GG12A1 A7079B12 Reflector 14 40
GG12A1 A7079B24 Reflector 28 40
GG10 A7512-12 Reflector 14 26
GG10 A7512-24 Reflector 28 26

© 2000 HONEYWELL INTERNATIONAL INC. 39

Product Category
MOTORS & FLASHTUBES PRODUCT FAMILY

A6458 A6532 55-0069

55-0221 55-0331

55-0723 55-0681

PART NUMBER DESCRIPTION

A6458 Motor, 28V
A6532 Motor, 28V
55-0069-1 Motor, 28V
55-0221-1 Strobe Tube (Pyrex)
55-0221-5 Strobe Tube (Quartz)
55-0221-11 Strobe Tube
55-0331-3 Strobe Tube (Quartz)
55-0723-1 Strobe Tube (Quartz)
55-0681-7 Strobe Tube (Quartz)
55-1473-3 Strobe Tube (not shown)

40 © 2000 HONEYWELL INTERNATIONAL INC.