Scribd
Upload
370 views1 page

Bucket CAT 6015B

1) An inspection report was produced for a bucket part from customer BUMA. 2) Measurements for diameters and dimensions were within tolerance except for one diameter measurement. 3) The report recommends machining and adding material to address the one out of tolerance measurement.

Uploaded by

M Ferry Anwar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
370 views1 page

Bucket CAT 6015B

1) An inspection report was produced for a bucket part from customer BUMA. 2) Measurements for diameters and dimensions were within tolerance except for one diameter measurement. 3) The report recommends machining and adding material to address the one out of tolerance measurement.

Uploaded by

M Ferry Anwar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

INSPECTION REPORT

Document No : FORM-QC-001-2 Responsibility : Quality Control


Report Date : December 16, 2019 Page : 1 of 1
No. : Customer : BUMA Part Name : BUCKET
Insp. : √ Pre Post Qty : 1 EA Model : CAT 6015B
SSC ID : SSC SMD - Quote No. : Part No. : -
Component Received :

FINDING
NO IMAGE DESCRIPTION

DIAMETER = 150 MM
A TEBAL = 111 MM

A E DIAMETER = 170 MM
B TEBAL = 111 MM
C
DIAMETER = 150 MM
C TEBAL = 110 MM
01
DIAMETER = 170 MM
D TEBAL = 111 MM
D
E DIMENSI = 803 MM

F
B F DIMENSI = 802 MM

> Actual Meansurement Bucket CAT 6015B

Item Actual Condition Recommendation


01 > Actual Meansurement Bucket CAT 6015B > Machining (Line Boring)
> Adding Material Facing

Checked by: Created by: Reviewed by:

Tatep Tepyana Date : December 16, 2019 Neni Nurhasanah Date : December 16, 2019 Bibit Pujianto Date : December 16, 2019
QC Inspector QC Admin SPV & QC Engeneering

You might also like