PRECAST

STANDARD RANGE
CONCRETE FENCING PRODUCTS
The standard products listed below are normally available from stock. Units are to our standard pattern and specification.
Other types are available on application.
Click on Page No. Page No.
CHAIN LINK POSTS Posts for 0.9 m, 1.2 m, 1.4 m, 1.5 m, 1.8 m, 2.15 m and 2.4 m high chain link. Posts with cranked or vertical extensions 3-14
for 1.8 m, 2.15 m cranked only at this length and 2.4 m high chain link and 3 rows barbed wire.
STRAINED WIRE Posts for various heights and line wire spacings for housing, road, farms and railways. 15-17
CLOSEBOARD Standard morticed or BS type morticed posts for fences 0.9 m to 2.4 m. Concrete gravel boards. 18-28
CLOSEBOARD OR Lightweight recessed type posts for fences 0.9 m, 1.05 m, 1.2 m, 1.5 m and 1.8 m with gravel boards. 29-35
PALISADE Lightweight recessed type posts for fences 0.9 m, 1.05 m, 1.4 m and 1.8 m without gravel boards.
BS type recessed posts for fences 1.8 m, 2.0 m and 2.4 with gravel boards.
BS type recessed posts for fences 1.8 m without gravel boards.
Concrete gravel boards.
CONCRETE POST Posts and slot-in panels for fences 0.9 m to 4.2 m. 36-37
AND PANEL
ACOUSTIC FENCING Posts and slot-in panels for fences from 0.9 m to 3.6 m in 300 mm steps. 38
SLOTTED POSTS Posts for timber panels, for fences from 0.9 m to 3.0 m in 300 mm steps. Concrete gravel boards 150mm and 300mm 39-43
UNIVERSAL POSTS 1.5 m, 1.8 m and 2.4 m to 3.3 m in 300 mm steps. 44
SPURS 1.05 m to 1.5 m in 150 mm steps. 45
BARREL POSTS Posts holed for tubular steel rail. 46

RAILWAY FENCING Posts to National Rail Southern, Eastern, Western and Midland Region specifications. -

All Dimensions quoted are nominal. Specification may vary according to point of manufacture.
CE Marking
From 1st July 2013, under the Construction Products Regulation (CPR), it has been mandatory for manufacturers and distributors to declare the performance
and apply CE marking to any of their products which are covered by a harmonised European standard (hEN). Any products that do not fall under the scope of
a harmonised European standard must not carry CE Marking.

2
For information on CE marked products and Declarations of Performance, please contact one of our Sales Offices.
01/01/2014
 CONTENTS
Page

CI/SIB (90.21) Hf2

PRECAST CONCRETE

0.9m CHAIN LINK FENCING PRODUCTS

POSTS 450 mm IN GROUND

09L intermediate post 1425 : 100 – 75

75
LINE WIRES: 3 No. at 430 mm centres.
150 Intermediate posts 10 mm holes,
275
430 A
straining holes 16 mm.
B

POSTS 600 mm IN GROUND GATE POST HOLING: 2 No. 25 mm

300 550
gate hanging holes A at 550 mm
09 intermediate post 1575 : 100 – 75 B centres. 2 No. 16 mm gate shutting
430 holes B at 300 mm centres.
A
09T4 straining post 1575 : 100 x 100
STRAINING & GATE POSTS:
09G4 gate post 1575 : 100 x 100 For details of types available see
sheet ref. CL1.
09S4 strut 1500 : 75 x 75

0.9m CHAIN LINK

ALLEN CONCRETE

3
01/01/2014
 CONTENTS
Page

CI/SIB (90.21) Hf2

PRECAST CONCRETE

1.2m CHAIN LINK FENCING PRODUCTS

POSTS 600 mm IN GROUND

12 intermediate post 1875 : 125 – 75

LINE WIRES: 3 No. at 580 mm centres.
12T straining post 1875 : 125 x 125 Intermediate posts 10 mm holes,
straining holes 16 mm.
12G gate post 1875 : 125 x 125
GATE POST HOLING: 2 No. 22 mm
12S strut 1830 : 100 x 75 gate hanging holes A at 850 mm centres.
2 No. 16 mm gate shutting holes B at
300 mm centres.
124 intermediate post 1875 : 100 – 75
EXTENSION BRACKETS: 2 No.
12T4 straining post 1875 : 100 x 100 12 mm holes E at 115 mm centres for
steel barbed wire extension brackets.
12S strut 1830 : 100 x 75 On posts for side hung gates use top
hanging hole for lower bracket fixing.
Not standard on CORNER and BACK
HUNG gate posts. Not provided on
types 124 and 12T4.

STRAINING & GATE POSTS:

For details of types available
see sheet ref. CL1.

1.2m CHAIN LINK

ALLEN CONCRETE

4
01/01/2014
 CONTENTS
Page

CI/SIB (90.21) Hf2

PRECAST CONCRETE

1.4m CHAIN LINK FENCING PRODUCTS

POSTS 600 mm IN GROUND

14 intermediate post 2075 : 125 – 75

35
14T straining post 2075 : 125 x 125 75
115 E 150
14G gate post 2075 : 125 x 125 E
A
LINE WIRES: 3 No. at 680 mm centres.
Intermediate holes 10 mm holes,
14S strut 1980 : 100 x 75 680 525 straining posts 16 mm.

B GATE POST HOLING: 2 No. 22 mm

144 intermediate post 2075 : 100 – 75 1050 gate hanging holes A at 1050 mm centres.
300 2 No. 16 mm gate shutting holes B at
14T4 straining post 2075 : 100 x 100 B 300 mm centres.

14S strut 1980 : 100 x 75 EXTENSION BRACKETS: 2 No.

680 12 mm holes E at 115 mm centres for
A
steel barbed wire extension brackets.
On posts for side hung gates use top
hanging hole for lower bracket fixing.
Not standard on CORNER and BACK
HUNG gate posts. Not provided on
types 144 and 14T4.

STRAINING & GATE POSTS:

For details of types available
see sheet ref. CL1.

1.4m CHAIN LINK

ALLEN CONCRETE

5
01/01/2014
 CONTENTS
Page

CI/SIB (90.21) Hf2

PRECAST CONCRETE

1.5m CHAIN LINK FENCING PRODUCTS

POSTS 600 mm IN GROUND

15 intermediate post 2175 : 125 – 75 35

75
15T straining post 2175 : 125 x 125 115 E E 150
A
E
15G gate post 2175 : 125 x 125
575
730 LINE WIRES: 3 No. at 730 mm centres.
15S strut 2130 : 100 x 75 Intermediate posts 10 mm holes,
B straining holes 16 mm.

300 1150 GATE POST HOLING: 2 No. 22 mm

gate hanging holes A at 1150 mm centres.
B
2 No. 16 mm gate shutting holes B at
300 mm centres.
730
EXTENSION BRACKETS: 2 No.
A 12 mm holes E at 115 mm centres for
steel barbed wire extension brackets.
On posts for side hung gates use top
hanging hole for lower bracket fixing.
Not standard on CORNER and BACK
HUNG gate posts.

STRAINING & GATE POSTS:

For details of types available
see sheet ref. CL1.

1.5m CHAIN LINK

ALLEN CONCRETE

6
01/01/2014
 CONTENTS
Page

CI/SIB (90.21) Hf2

PRECAST CONCRETE

1.8m CHAIN LINK FENCING PRODUCTS

POSTS 600 mm IN GROUND

35
18L intermediate post 2475 : 125 – 75 75
115 E
A
E 150
E

725
880
POSTS 760 mm IN GROUND
B
18 intermediate post 2625 : 125 – 75 LINE WIRES: 3 No. at 880 mm centres.
300 1450 Intermediate posts 10 mm holes,
18T straining post 2625 : 125 x 125 B straining holes 16 mm.
18G gate post 2625 : 125 x 125 GATE POST HOLING: 2 No. 22 mm
gate hanging holes A at 1450 mm centres.
18S strut 2595 : 100 x 75 880 2 No. 16 mm gate shutting holes B at
300 mm centres.
18 & 18T available in extra length up to 2925 A
EXTENSION BRACKETS: 2 No.
12 mm holes E at 115 mm centres for
steel barbed wire extension brackets.
On posts for side hung gates use top
hanging hole for lower bracket fixing.
Not standard on CORNER and BACK
HUNG gate posts.

STRAINING & GATE POSTS:

1.8m CHAIN LINK

For details of types available
see sheet ref. CL1.

ALLEN CONCRETE

7
01/01/2014
 CONTENTS
Page

CI/SIB (90.21) Hf2

PRECAST CONCRETE

1.8m CHAIN LINK FENCING PRODUCTS

AND 3 ROWS BARBED WIRE 75

50 140
CRANKED TOP: 0 140
15
POSTS 760 mm IN GROUND 0
15 150
18C intermediate post 3075 : 125 – 75 150
A
18CT straining post 3075 : 125 x 125
18S strut 2595 : 100 x 87 725
880
Specify inward or outward crank for straining posts.
B
18C and 18CT available in extra lengths up to 3675.
LINE WIRES: 3 No. at 880 mm centres.
300 1450 Intermediate posts 10 mm holes,
B straining holes 16 mm.
VERTICAL EXTENSION: BARBED WIRE: 3 No. at 150 mm centres
POSTS 760 mm IN GROUND (140 mm vertical extensions).
880 Intermediate posts 10 mm holes,
18V intermediate post 3075 : 125 – 75 straining holes 16 mm.
A
18VT straining post 3075 : 125 x 125 GATE POST HOLING: 2 No. 22 mm
gate hanging holes A at 1450 mm centres.
18VG gate post 3075 : 125 x 125 2 No. 16 mm gate shutting holes B at
300 mm centres.
18VG6 gate post 3075 : 150 x 150
STRAINING & GATE POSTS:
18S strut 2595 : 100 x 87 For details of types available
see sheet ref. CL1.

1.8m CHAIN LINK

ALLEN CONCRETE

8
01/01/2014
 CONTENTS
Page

CI/SIB (90.21) Hf2

PRECAST CONCRETE

2.0m CHAIN LINK FENCING PRODUCTS

35
75
POSTS 760 mm IN GROUND 115 E
A
E 150
E

20 intermediate post 2825 : 125 – 75

825
20T straining post 2825 : 125 x 125
980
20G gate post 2825 : 125 x 125
B
215S strut 2895 : 100 x 87
300
1650
B
LINE WIRES: 3 No. at 980 mm centres.
Intermediate posts 10 mm holes,
straining holes 16 mm.

980 GATE POST HOLING: 2 No. 22 mm

gate hanging holes A at 1650 mm centres.
2 No. 16 mm gate shutting holes B at
A
300 mm centres.

EXTENSION BRACKETS: 2 No.

12 mm holes E at 115 mm centres for
steel barbed wire extension brackets.
On posts for side hung gates use top
hanging hole for lower bracket fixing.
Not standard on CORNER and BACK
HUNG gate posts.

STRAINING & GATE POSTS:

2.0m CHAIN LINK

For details of types available
see sheet ref. CL1.

ALLEN CONCRETE

9
01/01/2014
 CONTENTS
Page

CI/SIB (90.21) Hf2

PRECAST CONCRETE

2.15m CHAIN LINK FENCING PRODUCTS

35
75
POSTS 760 mm IN GROUND 115 E
A
E 150
E

215 intermediate post 2975 : 125 – 75

875
215T straining post 2975 : 125 x 125
1055
215G gate post 2975 : 125 x 125
215S strut 2895 : 100 x 87 B

300 1750
B LINE WIRES: 3 No. at 1055 mm centres.
Intermediate posts 10 mm holes,
straining holes 16 mm.

GATE POST HOLING: 2 No. 22 mm

1055 gate hanging holes A at 1750 mm centres.
2 No. 16 mm gate shutting holes B at
300 mm centres.
A
EXTENSION BRACKETS: 2 No.
12 mm holes E at 115 mm centres for
steel barbed wire extension brackets.
On posts for side hung gates use top
hanging hole for lower bracket fixing.
Not standard on CORNER and BACK
HUNG gate posts.

STRAINING & GATE POSTS:

2.15m CHAIN LINK

For details of types available
see sheet ref. CL1.

10
ALLEN CONCRETE
01/01/2014
 CONTENTS
Page

CI/SIB (90.21) Hf2

PRECAST CONCRETE

2.15m CHAIN LINK 50

75
140
FENCING PRODUCTS

AND 3 ROWS BARBED WIRE 15

0 140

150 150 150

CRANKED TOP: 150
A
POSTS 760 mm IN GROUND

215C intermediate post 3375 : 125 – 75 875

215CT straining post 3375 : 125 x 125 1055

215VG gate post 3375 : 125 x 125

B
1750
215S strut 2895 : 100 x 87
300
Specify inward or outward crank for straining posts. LINE WIRES: 3 No. at 1055 mm centres.
B
Intermediate posts 10 mm holes,
215C and 215CT available in extra lengths up to 3675. straining holes 16 mm.

BARBED WIRE: 3 No. at 150 mm centres

1055 Intermediate posts 10 mm holes,
straining holes 16 mm.

A
GATE POST HOLING: 2 No. 22 mm
gate hanging holes A at 1750 mm centres.
2 No. 15 mm gate shutting holes B at
300 mm centres.

STRAINING & GATE POSTS:

For details of types available
see sheet ref. CL1.

2.15m CHAIN LINK

11
ALLEN CONCRETE
01/01/2014
 CONTENTS
Page

CI/SIB (90.21) Hf2

PRECAST CONCRETE

2.4m CHAIN LINK 35

E
75
E 150
FENCING PRODUCTS

115 A
E

787 1025
POSTS 760 mm IN GROUND

24 intermediate post 3225 : 125 x 100

24T straining post 3325 : 150 x 150
24G gate post 3325 : 150 x 150 B
2050

24S strut 3350 : 100 x 100 786 300

B

LINE WIRES: 4 No. at 787 mm,

786 mm and 787 mm centres.
Intermediate posts 10 mm holes,
straining holes 16 mm.

GATE POST HOLING: 2 No. 22 mm

787 gate hanging holes A at 2050 mm centres.
2 No. 16 mm gate shutting holes B at
A 300 mm centres.

EXTENSION BRACKETS: 2 No.

12 mm holes E at 115 mm centres for
steel barbed wire extension brackets.
On posts for side hung gates use top
hanging hole for lower bracket fixing.
Not standard on CORNER and BACK
HUNG gate posts.

STRAINING & GATE POSTS:

2.4m CHAIN LINK

For details of types available
see sheet ref. CL1.

12
ALLEN CONCRETE
01/01/2014
 CONTENTS
50 Page
0
20
20
0 75 CI/SIB (90.21) Hf2
140 PRECAST CONCRETE

2.4m CHAIN LINK 50

140

150
FENCING PRODUCTS

AND 3 ROWS BARBED WIRE 100 E

E
A
150
100
E1
CRANKED TOP:
787
POSTS 760 mm IN GROUND
1025

24C intermediate post 3675 : 125 x 100

24CT straining post 3675 : 150 x 150
B LINE WIRES: 4 No. at 787 mm,
24S strut 3350 : 100 x 100 786 mm and 787 mm centres.
786 300 2050 Intermediate posts 9 mm holes,
Specify inward or outward crank for straining posts. straining holes 15 mm.
B

BARBED WIRE: 3 No. at 200 mm centres

(140 mm vertical extensions).
VERTICAL EXTENSION: Intermediate posts 9 mm holes,
straining holes 15 mm.
POSTS 760 mm IN GROUND
GATE POST HOLING: 2 No. 22 mm
24V intermediate post 3675 : 125 x 100 787 gate hanging holes A at 2050 mm centres.
2 No. 15 mm gate shutting holes B at
24VT straining post 3675 : 150 x 150 A 300 mm centres.

24VG gate post 3675 : 150 x 150 EXTENSION BRACKETS: 2 No.

12 mm holes E at 100 mm centres
24S strut 3350 : 100 x 100 cranked top intermediate posts,
3 No. 12 mm holes E and E1 at
100 mm centres cranked top
straining posts.

STRAINING & GATE POSTS:

2.4m CHAIN LINK

For details of types available
see sheet ref. CL1.

13
ALLEN CONCRETE
01/01/2014
 CONTENTS
Page

CI/SIB (90.21) Hf2

PRECAST CONCRETE
DATA SHEET REF. CL1 FENCING PRODUCTS

STRAINING AND GATE POST TYPES, CHAIN LINK

END END CORNER CORNER 2 WAY OBTUSE OBTUSE OBTUSE
LH RH EXTERNAL INTERNAL EXTERNAL LH EXTERNAL RH INTERNAL

STRAIGHT
EL ER C CI D OL OR OI

CRANKED
IN

CL1: STRAINING AND GATE POST TYPES, CHAIN LINK

IEL IER IC ICI ID IO IOI

CRANKED
OUT
OEL OER OC OCI OD OO OOI

SIDE SIDE BACK BACK CORNER CORNER Where angled struts are
HUNG LH HUNG RH HUNG LH HUNG RH LH RH required for straining
posts, specify struts as
GATE BIRDSMOUTH

POSTS
SL SR BL BR CL CR B

14
ALLEN CONCRETE
01/01/2014
 CONTENTS
Page

CI/SIB (90.21) Hf2

PRECAST CONCRETE

STRAINED WIRE FENCING PRODUCTS

3 WIRE, 330mm CENTRES

POSTS 450 mm IN GROUND

09L intermediate post 1425 : 100 – 75

75

330

POSTS 600 mm IN GROUND

330
09 intermediate post 1575 : 100 – 75
09T straining post 1575 : 100 x 100
LINE WIRES: 3 No. at 330 mm centres.
3WS strut (slotted) 1500 : 100 x 75 Intermediate posts 10 mm holes,
straining holes 16 mm, struts slotted.

STRAINED WIRE
15
ALLEN CONCRETE
01/01/2014
 CONTENTS
Page

CI/SIB (90.21) Hf2

PRECAST CONCRETE

STRAINED WIRE FENCING PRODUCTS

mULTI WIRE, 250, 225, 200, 175, 150, 125 mm CENTRES

7 intermediate post 1950 : 125 – 75 75

7T straining post 2285 : 125 x 125 250

210WS strut (slotted) 2150 : 100 x 100

225

200

175

150
125

LINE WIRES: 7 No. at 75, 250, 225, 200,175,

150, 125 mm centres. Intermediate posts 9 mm
holes, straining holes 15 mm, struts slotted.

DEPTH IN GROUND: Choose to suit height

of fence required and nature of ground.

STRAINED WIRE
16
ALLEN CONCRETE
01/01/2014
 CONTENTS
Page

CI/SIB (90.21) Hf2

PRECAST CONCRETE

STRAINED WIRE FENCING PRODUCTS

mULTI WIRE, BRITISH STANDARD SPACING,

250, 250, 230, 150, 150, 150, 100 mm CENTRES
75

250
120BW intermediate post 1875 : 123 – 75
135BW intermediate post 2025 : 125 – 75 250

120BWT straining post 2025 : 125 x 125 230

135BWT straining post 2175 : 125 x 125 150

150
210WS strut (slotted) 2150 : 100 x 100 150
100

LINE WIRES: 8 No. at 75, 250, 250, 230, 150,

150, 150, 100 mm centres. Intermediate posts 9
mm holes,straining holes 15 mm, struts slotted.
BW120
DEPTH IN GROUND: Choose to suit height
of fence required and nature of ground. BW135

STRAINED WIRE
17
ALLEN CONCRETE
01/01/2014
 CONTENTS
Page

CI/SIB (90.21) Hf2

PRECAST CONCRETE

CLOSE BOARD FENCING FENCING PRODUCTS

mORTICED POSTS - ROUND TOP 100 x 100 AND GRAVEL BOARDS

POSTS 600 mm IN GROUND GRAVEL BOARDS

09MLR 0.9m fence post 1550 : 100 x 100 188GR gravel board 1885 : 150 x 50
12MLR 1.2m fence post 1850 : 100 x 100 288GR gravel board 2885 : 150 x 50
14MLR 1.4m fence post 2050 : 100 x 100 300GR gravel board 3000 : 150 x 50
15MLR 1.5m fence post 2150 : 100 x 100

POSTS 680 mm IN GROUND

18MLR 1.8m fence post 2500 : 100 x 100

20MLR 2.0m fence post 2700 : 100 x 100
20MLRC 1.8m/2.0m fence corner post 2700 : 100 x 100

CLOSE BOARD FENCING

18
ALLEN CONCRETE
01/01/2014
 CONTENTS
Page

CI/SIB (90.21) Hf2

PRECAST CONCRETE

CLOSE BOARD FENCING FENCING PRODUCTS

mORTICED POSTS - ROUND TOP 100 x 100

150 228

150 228

150 228
845
1125
645
925
345
625
2050
1850
266 266 266
1550
75 75 75

100 100 100 100 100 100

CLOSE BOARD FENCING

09MLR 0.9m FENCE 12MLR 1.2m FENCE 14MLR 1.4m FENCE

19
ALLEN CONCRETE
01/01/2014
 CONTENTS
Page

CI/SIB (90.21) Hf2

PRECAST CONCRETE
FENCING PRODUCTS

ARRIS RAILS:
150
228 Mortices 65 x 25 offset 30 mm from trowelled
face of post.
150
228
GRAVEL BOARDS:
622 2 No. 12mm holes on c/l.
840
150 FILLETS:
228
622 12mm holes provided for attachment of fillets.
840
CORNER POSTS:
Additional half-depth mortices at
right angles.
622
Gravel board holes repeated.
945 Dimensions and other details as
1225 622 2700
685 standard posts.

2500
685
2150 266

266 75
266 125
75 75
75

CLOSE BOARD FENCING

100 100 100 100 100 100
15MLR 1.5m FENCE 18MLR 1.8m FENCE 20MLR 2.0m FENCE

20
ALLEN CONCRETE
01/01/2014
 CONTENTS
Page

CI/SIB (90.21) Hf2

PRECAST CONCRETE

CLOSE BOARD FENCING FENCING PRODUCTS

mORTICED POSTS - PYRAmID TOP 100 x 100 AND GRAVEL BOARDS

POSTS 600 mm IN GROUND GRAVEL BOARDS

09ML4 0.9m fence post 1550 : 100 x 100 188GR gravel board 1885 : 150 x 50
12ML4 1.2m fence post 1850 : 100 x 100 288GR gravel board 2885 : 150 x 50
14ML4 1.4m fence post 2050 : 100 x 100 300GR gravel board 3000 : 150 x 50
15ML4 1.5m fence post 2150 : 100 x 100

POSTS 680 mm IN GROUND

18ML4 1.8m fence post 2500 : 100 x 100

20ML4 2.0m fence post 2700 : 100 x 100
20ML4C 1.8m/2.0m fence corner post 2700 : 100 x 100

CLOSE BOARD FENCING

21
ALLEN CONCRETE
01/01/2014
 CONTENTS
Page

CI/SIB (90.21) Hf2

PRECAST CONCRETE

CLOSE BOARD FENCING FENCING PRODUCTS

mORTICED POSTS - PYRAmID TOP 100 x 100

120 198

120 198

120 198
845
1125
645
925
345
625
2050
1850
266 266 266
1550
75 75 75

100 100 100 100 100 100

CLOSE BOARD FENCING

09ML4 0.9m FENCE 12ML4 1.2m FENCE 14ML4 1.4m FENCE

22
ALLEN CONCRETE
01/01/2014
 CONTENTS
Page

CI/SIB (90.21) Hf2

PRECAST CONCRETE
FENCING PRODUCTS

ARRIS RAILS:
120
198 Mortices 65 x 25 on c/l.

120 GRAVEL BOARDS:

198
2 No. 12mm holes on c/l.
622
840 FILLETS:
120 12mm holes provided for attachment of fillets.
198
622
840 CORNER POSTS:
Additional half-depth mortices at
right angles.
Gravel board holes repeated.
622
Dimensions and other details as
945 standard posts.
1225 622 2700
685
2500
685
2150 266

266 75
266 125
75 75
75

CLOSE BOARD FENCING

100 100 100 100 100 100
15ML4 1.5m FENCE 18ML4 1.8m FENCE 20ML4 2.0m FENCE

23
ALLEN CONCRETE
01/01/2014
 CONTENTS
Page

CI/SIB (90.21) Hf2

PRECAST CONCRETE

CLOSE BOARD FENCING FENCING PRODUCTS

mORTICED POSTS - ROUND TOP 115 x 115

POSTS 750 mm IN GROUND

18MS 1.8m fence post 2600 : 115 x 115 18MSC 1.8m fence corner post 2600 : 115 x 115
21MS 2.15m fence post 2900 : 115 x 115 21MSC 2.15m fence corner post 2900 : 115 x 115

CRANKED TOP

POSTS 750 mm IN GROUND ARRIS RAILS: FILLETS:

Mortices 65 x 25 offset 35 mm from 12mm holes provided for
18MSB 1.8m fence post 2985 : 115 x 115 trowelled face of post. attachment of fillets.

COUNTER RAILS: CORNER POSTS:

3 No. 12 holes offset 75. Additional half-depth mortices at
right angles. Counter rail and
GRAVEL BOARDS GRAVEL BOARDS: gravel board holes repeated.
3 No. 12mm holes offset Dimensions and other details as
75mm for bracket.
188GR gravel board 1885 : 150 x 50 standard posts.

Not available in Cranked Top

288GR gravel board 2885 : 150 x 50
300GR gravel board 3000 : 150 x 50

CLOSE BOARD FENCING

24
ALLEN CONCRETE
01/01/2014
 CONTENTS
Page

CI/SIB (90.21) Hf2

CLOSE BOARD FENCING PRECAST CONCRETE
FENCING PRODUCTS

mORTICED POSTS - ROUND TOP 115 x 115 75

15
0
0
115 140 15
140
115 320
140
75
115 140
115 320 320

990 760
600
610 610

2985
600 760 2900
610
750 610

2600

230 230 192.5

37.5 37.5 75
37.5 37.5
75
75

CLOSE BOARD FENCING

115 115 115 115 115 115
18MS 1.8m FENCE 21MS 2.15m FENCE 18MSB 1.8m FENCE

25
ALLEN CONCRETE
01/01/2014
 CONTENTS
Page

CI/SIB (90.21) Hf2

PRECAST CONCRETE

CLOSE BOARD FENCING FENCING PRODUCTS

BS TYPE mORTICED POSTS AND GRAVEL BOARDS

POSTS 600 mm IN GROUND GRAVEL BOARDS
12MB 1.2m fence post 1900 x 140 x 115 188GR gravel board 1885 x 150 x 50
12MBC 1.2m fence corner post 1900 x 140 x 115 288GR gravel board 2885 x 150 x 50
300GR gravel board 3000 x 150 x 50
POSTS 750 mm IN GROUND
15MB 1.5m fence post 2350 x 140 x 115
18MB 1.8m fence post 2650 x 140 x 115
20MB 2.0m fence post 2800 x 140 x 115
24MB 2.4m fence post 3250 x 140 x 115
18MBC 1.8m fence corner post 2650 x 140 x 115
20MBC 2.0m fence corner post 2800 x 140 x 115
24MBC 2.4m fence corner post 3250 x 140 x 115

CLOSE BOARD FENCING

26
ALLEN CONCRETE
01/01/2014
 CONTENTS
Page

CI/SIB (90.21) Hf2

PRECAST CONCRETE

CLOSE BOARD FENCING FENCING PRODUCTS

BS TYPE mORTICED POSTS AND GRAVEL BOARDS

1885, 2885 or 3000 50

150

188GR
288GR 115 120
175
300GR 115 115

115 120 675 500

175
115 115

525
500
625

2350
1900
215
37.5
215 37.5
37.5
37.5
37.5
37.5

Fillet hole
positions

CLOSE BOARD FENCING

not shown
for clarity

140 115 140 115

12MB 1.2M FENCE 15MB 1.5M FENCE

27
ALLEN CONCRETE
01/01/2014
 CONTENTS
Page

CI/SIB (90.21) Hf2

PRECAST CONCRETE

CLOSE BOARD FENCING 175

115
115
120
115
FENCING PRODUCTS

BS TYPE mORTICED POSTS AND GRAVEL BOARDS

800 633
115 120
175
115 115
ARRIS RAILS:
Mortices 65 x 25 offset 36 mm from
trowelled face of post. 2 No. 12mm
holes through face to top mortice. 815 650 633
COUNTER RAILS: 630
Mortices 50 x 32 offset 38 mm from
face of post.
3250
GRAVEL BOARDS:
4 No. 12mm holes offset 75 mm
650 633
for bracket.
2650
FILLETS:
12mm holes provided for
attachment of fillets. 215 215
CORNER POSTS: 37.5
37.5
37.5
37.5
37.5 37.5
Additional half-depth mortices at
right angles.
Gravel board holes repeated.
Dimensions and other details as
standard posts.

CLOSE BOARD FENCING

Fillet hole 20mB as 18mB with
positions extra Gravel board
not shown holes.
for clarity

140 115 140 115

18MB 1.8M FENCE 24MB 2.4M FENCE

28
ALLEN CONCRETE
01/01/2014
 CONTENTS
Page

CI/SIB (90.21) Hf2

PRECAST CONCRETE

CLOSE BOARD OR PALISADE FENCING FENCING PRODUCTS

LIGHTWEIGHT RECESSED TYPE POSTS AND GRAVEL BOARDS

POSTS 600 mm IN GROUND POSTS 675 mm IN GROUND

09RGL 0.9m fence post 1450 x 125 - 100 x 110 15RGL 1.5m fence post 2050 x 125 - 100 x 110
105RGL 1.05m fence post 1600 x 125 - 100 x 110 18RGL 1.8m fence post 2500 x 125 - 100 x 110
12RGL 1.2m fence post 1750 x 125 - 100 x 110

GRAVEL BOARDS
288GR gravel board 2885 x 150 x 50

CLOSE BOARD OR PALISADE

300GR gravel board 3000 x 150 x 50

29
ALLEN CONCRETE
01/01/2014
 CONTENTS
Page

CI/SIB (90.21) Hf2

PRECAST CONCRETE

CLOSE BOARD OR PALISADE FENCING FENCING PRODUCTS

LIGHTWEIGHT RECESSED TYPE POSTS AND GRAVEL BOARDS

2885 or 3000 50

150
45°
288GR 100
300GR
100 110

100 110 100 150

100 110 100 150
100 16
150
600
450
300 ARRIS RAILS:
Recesses for arris rails
as shown above. 2 No. 12mm holes
300 300 300 1750 through each recess.
1600
1450 GRAVEL BOARDS:
2 No. 12mm holes for gravel boards.

FILLETS:

CLOSE BOARD OR PALISADE

12mm holes provided for
attachment of fillets.
Fillet hole
positions
not shown
for clarity
125 110 125 110 125 110
09RGL 0.9M FENCE 105RGL 1.05M FENCE 12RGL 1.2M FENCE

30
ALLEN CONCRETE
01/01/2014
 CONTENTS
Page

CI/SIB (90.21) Hf2

PRECAST CONCRETE
FENCING PRODUCTS

100 110

100 150

100 110

100 150 600

450

600
450
2400

2050
300
300

Fillet hole
positions

CLOSE BOARD FENCING

not shown
for clarity

125 110 125 110

15RGL 1.5M FENCE 18RGL 1.8M FENCE

31
ALLEN CONCRETE
01/01/2014
 CONTENTS
Page

CI/SIB (90.21) Hf2

PRECAST CONCRETE

CLOSE BOARD OR PALISADE FENCING FENCING PRODUCTS

LIGHTWEIGHT RECESSED TYPE POSTS WITHOUT GRAVEL BOARDS

POSTS 600 mm IN GROUND

09RL 0.9m fence post 1450 x 125 - 100 x 110
105RL 1.05m fence post 1600 x 125 - 100 x 110 45°
100
14RL 1.4m fence post 1900 x 125 - 100 x 110

POSTS 675 mm IN GROUND

16
18RL 1.8m fence post 2400 x 125 - 100 x 110

ARRIS RAILS:
Recesses for arris rails
as shown above. 2 No. 12mm holes
through each recess.

FILLETS:
12mm holes provided for

CLOSE BOARD OR PALISADE

attachment of fillets.

32
ALLEN CONCRETE
01/01/2014
 CONTENTS
Page

CI/SIB (90.21) Hf2

PRECAST CONCRETE

CLOSE BOARD OR PALISADE FENCING FENCING PRODUCTS

LIGHTWEIGHT RECESSED TYPE POSTS WITHOUT GRAVEL BOARDS

100 110

100 150

100 110 675

100 150
100 110

100 110 100 150 450

100 150 675
2400
600
450 450
1900

1600
1450

CLOSE BOARD OR PALISADE

Fillet hole
positions
not shown
for clarity

125 110 125 110 125 110 125 110

09RL 0.9M FENCE 105RL 1.05M FENCE 14RL 1.4M FENCE 18RL 1.8M FENCE

33
ALLEN CONCRETE
01/01/2014
 CONTENTS
Page

CI/SIB (90.21) Hf2

PRECAST CONCRETE

CLOSE BOARD OR PALISADE FENCING FENCING PRODUCTS

BS TYPE RECESSED POSTS AND GRAVEL BOARDS

POSTS 750 mm IN GROUND GRAVEL BOARDS

18RG 1.8m fence post 2500 x 140 - 100 x 115 288GR gravel board 2885 x 150 x 50
20RG 2.0m fence post 2700 x 140 - 100 x 115 300GR gravel board 3000 x 150 x 50
24RG 2.4m fence post 3100 x 140 - 100 x 115

BS TYPE RECESSED POSTS WITHOUT GRAVEL BOARDS

POSTS 750 mm IN GROUND

18R 1.8m fence post 2500 x 140 - 100 x 115

CLOSE BOARD OR PALISADE

34
ALLEN CONCRETE
01/01/2014
 CONTENTS
Page

CI/SIB (90.21) Hf2

PRECAST CONCRETE
FENCING PRODUCTS
100 115

100 150

100 115

100 600
100 115 150 100 115

100 150 100 150 45°

100
700

600 600
675

16
3100
700 ARRIS RAILS:
600 600
Recesses for arris rails
2700 675 as shown above. 2 No. 12mm holes
2500 2500 through each recess.

GRAVEL BOARDS:
300 300 300 2 No. 12mm holes for gravel boards.

FILLETS:
12mm holes provided for
attachment of fillets.
Fillet hole
positions CORNER POSTS:

CLOSE BOARD OR PALISADE

not shown
for clarity All corner posts 125 x 125 section.
Recesses and gravel board holes
repeated at right angles.

140 115 140 115 140 115 140 115

18RG 1.8M FENCE 20RG 2.0M FENCE 24RG 2.4M FENCE 18R 1.8M FENCE

35
ALLEN CONCRETE
01/01/2014
 CONTENTS
Page

CI/SIB (90.21) Hf2

PRECAST CONCRETE

CONCRETE POST AND PANEL FENCING PRODUCTS

15PH Intermediate post 1500 x 125 x 100 15PC Corner post 1500 x 125 x 125

18PH Intermediate post 1800 x 125 x 100 18PC Corner post 1800 x 125 x 125

21PH Intermediate post 2100 x 125 x 100 21PC Corner post 2100 x 125 x 125

24PH Intermediate post 2400 x 125 x 100 24PC Corner post 2400 x 125 x 125

27PH Intermediate post 2700 x 125 x 100 27PC Corner post 2700 x 125 x 125

30PH Intermediate post 3000 x 125 x 100 30PC Corner post 3000 x 125 x 125

33PH Intermediate post 3300 x 125 x 100 33PC Corner post 3300 x 150 x 150

36PH Intermediate post 3600 x 125 x 100 36PC Corner post 3600 x 150 x 150

37PH Intermediate post 3700 x 175 x 125

40PH Intermediate post 4000 x 175 x 125 18PB Intermediate post 3100 x 125 x 100
with integral bent over arm
43PH Intermediate post 4300 x 200 x 150 21PB Intermediate post 3400 x 125 x 100
with integral bent over arm
46PH Intermediate post 4600 x 200 x 150 24PB Intermediate post 3700 x 125 x 100

CONCRETE POST AND PANEL

with integral bent over arm
49PH Intermediate post 4900 x 200 x 150

52PH Intermediate post 5200 x 200 x 150

194P Panel 1940 x 300 x 47 194PD Panel 1940 x 300 x 47

with durite stone applied to back face

36
ALLEN CONCRETE
01/01/2014
 CONTENTS
Page

CI/SIB (90.21) Hf2

PRECAST CONCRETE
FENCING PRODUCTS
5
‘J’

All panels have 5mm overlap and concealed joints ‘J’

305
75 0
15 1940 42 (47 Ends)
0
15
2m post centres 50
80

100
E
115
E

All panel posts have 2

No. 12mm Dia. holes at
E 115mm centres
for barbed wire extension
brackets

CONCRETE POST AND PANEL

Panel slot
50 x 25

FENCE HEIGHT IN METRES 0.9 1.2 1.5 1.8 2.1 2.4 100
NO. OF PANELS PER BAy 3 4 5 6 7 8

37
ALLEN CONCRETE
01/01/2014
 CONTENTS
Page

CI/SIB (90.21) Hf2

PRECAST CONCRETE

ACOUSTIC FENCE FENCING PRODUCTS

50

50

1900
Post height 1875 - 4575 in 300 increments

Fence Post Length Number 50 10

Height Code of Post of Panels

900 AC9 1875 3

1200 AC12 2175 4
1500 AC15 2475 5 10
1800 AC18 2775 6 Tongue
2100 AC21 3075 7
25
2400 AC24 3375 8
Slot
2700 AC27 3675 9
305
3000 AC30 3975 10 300
305 O/A
3300 AC33 4275 11
3600 AC36 4575 12

Groove 10

Height module 300. Post centres 2010 for intermediate posts 200 x 160
Panels are available with either smooth or an exposed aggregate finish
6.5 RAD

SECTION OF PANEL
160 200

ACOUSTIC FENCE
INTERMEDIATE POST

38
ALLEN CONCRETE
01/01/2014
 CONTENTS
Page

CI/SIB (90.21) Hf2

PRECAST CONCRETE

SLOTTED POSTS - ROUND TOP FENCING PRODUCTS

FOR TImBER PANELS

15P Intermediate post 1500 x 100 x 85 15PE End post 1500 x 100 x 85
18P Intermediate post 1800 x 100 x 85 18PE End post 1800 x 100 x 85
21P Intermediate post 2100 x 100 x 85 21PE End post 2100 x 100 x 85
24P Intermediate post 2400 x 100 x 85 24PE End post 2400 x 100 x 85
27P Intermediate post 2700 x 100 x 85 27PE End post 2700 x 100 x 85

15PH Intermediate post 1500 x 125 x 100 15PC Corner post 1500 x 125 x 125
18PH Intermediate post 1800 x 125 x 100 18PC Corner post 1800 x 125 x 125
21PH Intermediate post 2100 x 125 x 100 21PC Corner post 2100 x 125 x 125
24PH Intermediate post 2400 x 125 x 100 24PC Corner post 2400 x 125 x 125
27PH Intermediate post 2700 x 125 x 100 27PC Corner post 2700 x 125 x 125
30PH Intermediate post 3000 x 125 x 100 30PC Corner post 3000 x 125 x 125
33PH Intermediate post 3300 x 125 x 100 33PC Corner post 3300 x 125 x 125
36PH Intermediate post 3600 x 125 x 100 36PC Corner post 3600 x 125 x 125

15GT18 Gravel board recessed 1800 x 150 x 50 30GT18 Gravel board recessed 1800 x 300 x 50
15GT Gravel board recessed 1830 x 150 x 50 30GT Gravel board recessed 1830 x 300 x 50
15GTP Gravel board solid 1830 x 150 x 50 30GTP Gravel board solid 1830 x 300 x 50
30GTR Gravel board rock faced 1830 x 300 x 50

SLOTTED POSTS
ALL POSTS HAVE SLOTS 56 - 50 x 25 deep.

39
ALLEN CONCRETE
01/01/2014
 CONTENTS
Page

CI/SIB (90.21) Hf2

PRECAST CONCRETE

SLOTTED POSTS - ROUND TOP FENCING PRODUCTS

FOR TImBER PANELS

150

1800
15GT18 50

150

1830
15GT 50

150

1830
15GTP 50

2700
300
2400

1800 2100
30GT18 50
1800

300 1500

1830
30GT 50

300

SLOTTED POSTS
1830
30GTP 50 85 100 85 100 85 100 85 100 85 100
15P 18P 21P 24P 27P
30GTR Gravel board rock faced 1830 x 300 x 50 not shown

40
ALLEN CONCRETE
01/01/2014
 CONTENTS
Page

CI/SIB (90.21) Hf2

PRECAST CONCRETE

SLOTTED POSTS - ROUND TOP FENCING PRODUCTS

FOR TImBER PANELS

3600

3300
3000

2700

2400

2100

1800

1500

SLOTTED POSTS
100 125 100 125 100 125 100 125 100 125 100 125 100 125 100 125
15PH 18PH 21PH 24PH 27PH 30PH 33PH 36PH

41
ALLEN CONCRETE
01/01/2014
 CONTENTS
Page

CI/SIB (90.21) Hf2

PRECAST CONCRETE

SLOTTED POSTS - PYRAmID TOP FENCING PRODUCTS

FOR TImBER PANELS

15P4 Intermediate post 1500 x 100 x 85 15P4E End post 1500 x 100 x 85
18P4 Intermediate post 1800 x 100 x 85 18P4E End post 1800 x 100 x 85
21P4 Intermediate post 2100 x 100 x 85 21P4E End post 2100 x 100 x 85
24P4 Intermediate post 2400 x 100 x 85 24P4E End post 2400 x 100 x 85
27P4 Intermediate post 2700 x 100 x 85 27P4E End post 2700 x 100 x 85

15P4C Corner post 1500 x 125 x 125 15GT18 Gravel board recessed 1800 x 150 x 50
18P4C Corner post 1800 x 125 x 125 15GT Gravel board recessed 1830 x 150 x 50
21P4C Corner post 2100 x 125 x 125 15GTP Gravel board solid 1830 x 150 x 50
24P4C Corner post 2400 x 125 x 125 30GT18 Gravel board recessed 1800 x 300 x 50
27P4C Corner post 2700 x 125 x 125 30GT Gravel board recessed 1830 x 300 x 50
30GTP Gravel board solid 1830 x 300 x 50
30GTR Gravel board rock faced 1830 x 300 x 50

SLOTTED POSTS
ALL POSTS HAVE SLOTS 56 - 50 x 25 deep.

42
ALLEN CONCRETE
01/01/2014
 CONTENTS
Page

CI/SIB (90.21) Hf2

PRECAST CONCRETE

SLOTTED POSTS - PYRAmID TOP FENCING PRODUCTS

FOR TImBER PANELS

150

1800
15GT18 50

150

1830
15GT 50

150

1830
15GTP 50

2700
300
2400

1800 2100
30GT18 50
1800

300 1500

1830
30GT 50

300

SLOTTED POSTS
1830
30GTP 50 85 100 85 100 85 100 85 100 85 100
15P 18P 21P 24P 27P
30GTR Gravel board rock faced 1830 x 300 x 50 not shown

43
ALLEN CONCRETE
01/01/2014
 CONTENTS
Page

CI/SIB (90.21) Hf2

PRECAST CONCRETE

UNIVERSAL POSTS FENCING PRODUCTS

POST: 100 x 100 HOLING:

12mm holes at 75 mm
15U 1500 from top then at 300mm.
18U 1800
24U 2400
27U 2700
30U 3000
33U 3300
3300

3000

2700

2400

1800

1500

UNIVERSAL POSTS
100 100 100 100 100 100
15U 18U 24U 27U 30U 33U

44
ALLEN CONCRETE
01/01/2014
 CONTENTS
Page

CI/SIB (90.21) Hf2

PRECAST CONCRETE

SPURS FENCING PRODUCTS

105LS Spur 1050 x 75 x 75 Holes 12mm diameter

12LS Spur 1200 x 75 x 75

105SP Spur 1050 x 100 x 100

12SP Spur 1200 x 100 x 100
135SP Spur 1350 x 100 x 100
15SP Spur 1500 x 100 x 100

150

150
300
150 150
300
150 150
300 300

300 300 1500

1350
1200 1200
1050 1050

75 75 75 75 100 100 100 100 100 100 100 100

105LS 12LS 105SP 12SP 135SP 15SP

SPURS
45
ALLEN CONCRETE
01/01/2014
 CONTENTS
Page

CI/SIB (90.21) Hf2

100 100 PRECAST CONCRETE

BARREL POSTS 600

FENCING PRODUCTS

FOR TUBULAR STEEL RAIL 100

105 BP Post 1050 x 150 x 100 1 Hole 60mm

1600
60mm
1600
Dia Hole Dia Holes
16BP Post 1600 x 150 x 100 1 Hole
1050
16BP2 Post 1600 x 150 x 100 2 Hole 60mm
Dia Hole

16BPSCC Post 1600 x 150 x 100 2 Hole

168BP Post 1680 x 225 - 150 x 100 2 Hole
175BP Post 1750 x 155 x 145 - 110 2 Hole
18BPHCC Post 1880 x 170 - 140 2 Hole 100 150 100 150 100 150
105BP 16BP 16BP2
15BP Post 1500 x 130 x 130 2 Hole 100 140
110
150 100
100
160
60mm 60mm
200 Dia Holes 12x12 Dia Holes
550
Chamfer 190
585
460
400

525 60mm
1880 Dia Holes
1750 1820
55mm
Dia Holes 1680
60mm 1600 1500
Dia Holes

Chamfererd
Edges

595

BARREL POSTS
100 150 100 225 145 155 170 170 130 130
16BPSCC 168BP 175BP 18BPHCC 15BP

46
ALLEN CONCRETE
01/01/2014