IMPACT 4.04.
00 17/02/2020
Chassis ID Path
A 681526 4111/Repair//Clutch, wear check
Model Identity
FH 131275427
Publish date ID/Operation
13/07/2012 41104-3
41104-3 Clutch, wear check
Note: Information is subject to change without notice. Illustrations are used for reference only and may differ slightly
from the actual vehicle being serviced. However, key components addressed in this information are represented as
accurately as possible.
Note: For additional information concerning inspection of wear, see Wear check, general
VT2014/OD, VT2514/OD, VT/VTO2214B, VT/VTO2514B, VT/VTO2814B,
VT2009B FSS-LEAF
Special tools: 9998579
1
Remove the plug in the measuring hole on the clutch housing.
Note: This step is only valid for vehicles equipped with gearbox different from VT2009B.
VTx2214B, -2514B, -2412B, -2814B
Copyright to this documentation belongs to the Volvo Group. No reproduction, copying, change, amendment or other similar disposal is entitled without prior written consent by
the Volvo Group
The information contained herein is current at the time of its original distribution, but is subject to change. The reader is advised that printed copies are uncontrolled.
1/3
IMPACT 4.04.00 17/02/2020
VT1708B, -2009B
Insert measuring tool 9998579 in the hole and against the clutch fork. If the vehicle has gearbox VT2009B just let the
end of the tool 9998579 touch the clutch fork.
Move the slide to the clutch housing and lock with the lock screw.
Special tools: 9998579
3
Remove measuring tool 9998579 and note the value on the slide.
Special tools: 9998579
Copyright to this documentation belongs to the Volvo Group. No reproduction, copying, change, amendment or other similar disposal is entitled without prior written consent by
the Volvo Group
The information contained herein is current at the time of its original distribution, but is subject to change. The reader is advised that printed copies are uncontrolled.
2/3
IMPACT 4.04.00 17/02/2020
Note the value on the label.
With a new clutch plate, note the value in column X1.
With wear inspection note the value in column X2.
Values for disc(s) when replacement is necessary
X1 = new plate
X2 = measured value
Y = max wear range,
Y = X2-X1
Date = date
Vehicle Single Double
plate plate
FH12, FH16, NH12, FL12, FM9, Y = 30 Y = 32
FM12, FM, FH mm mm
Copyright to this documentation belongs to the Volvo Group. No reproduction, copying, change, amendment or other similar disposal is entitled without prior written consent by
the Volvo Group
The information contained herein is current at the time of its original distribution, but is subject to change. The reader is advised that printed copies are uncontrolled.
3/3
