773E Off-Highway Truck ASK00001-UP (MACHINE)(SEBP4999 - 49) - Systems & Co...
Page 1 of 1
Shutdown SIS
Previous Screen
Product: TRUCK
Model: 773E TRUCK ASK
Configuration: 773E Off-Highway Truck ASK00001-UP (MACHINE)
Testing and Adjusting
69D, 769D , 773D, 773E, 776D, 777D, 784C, 785C, 785D, 789C, 789D, 793C and 793D
Off-Highway Trucks and 771D, 775D and 775E Quarry Trucks Braking System
Media Number -SENR1503-14 Publication Date -01/11/2011 Date Updated -23/03/2018
i01661858
Electronic Control Module (ECM) - Flash Program
SMCS - 7610-591-BRK
Note: The trucks can be equipped with three possible configurations for the brake system: Integrated
Brake Electronic Control, Automatic Retarder Control (ARC) and Traction Control System (TSC).
Perform the following procedure in order to flash program the ECM. The ECM is flashed in order to
upgrade the software. Flash programming of the ECM must also be done if the ECM has been
replaced. The Caterpillar Electronic Technician (ET) contains the program WinFlash. WinFlash is
used in order to load software into the ECM. The following procedure is used in order to FLASH
software into the brake ECM.
1. Procedure
a. Connect the 7X-1425 Data Link Cable between the 7x-1700 Communication Adapter and
the Electronic Technician.
b. Connect the 139-4166 Data Link Cable between the 7x-1700 Communication Adapter
and the diagnostic connector of the machine.
c. Use WinFlash in order to load the software.
Copyright 1993 - 2020 Caterpillar Inc. Wed Mar 18 11:29:25 PDT 2020
All Rights Reserved.
Private Network For SIS Licensees.
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb/... 3/18/2020
