Scribd
Upload
273 views1 page

Consolidated Construction Consortium LTD.: DOC No.:CCCL/HSE/003 OCP No.17 Date

1) The document provides an operational control procedure for arc welding that outlines 8 key controls to ensure safety. 2) It specifies controls for checking welding equipment, removing flammables, containing sparks, and using proper protective gear. 3) Fire prevention measures like having fire extinguishers and a fire watch are also required according to the procedure.

Uploaded by

radhouane
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
273 views1 page

Consolidated Construction Consortium LTD.: DOC No.:CCCL/HSE/003 OCP No.17 Date

1) The document provides an operational control procedure for arc welding that outlines 8 key controls to ensure safety. 2) It specifies controls for checking welding equipment, removing flammables, containing sparks, and using proper protective gear. 3) Fire prevention measures like having fire extinguishers and a fire watch are also required according to the procedure.

Uploaded by

radhouane
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

DOC No.

:CCCL/HSE/003
Consolidated Construction Consortium Ltd.
OCP No.17

OPERATIONAL CONTROL PROCEDURE Date :

ACTIVITY: ARC WELDING

Project : Location :

Sub-Contractor : Nature of work:

Sl. Performed Checked


Controls
No. by by
Check the welding machine / generator, volt meters/ ampere meter are
in working condition

- Cables/ holder withstand maximum current requirement and

- Welding holder fully insulated


1
- Double earthing to be provided

- Protect Welding equipment from weather conditions

- Provide ELCB or RCCB


Obtain PTW from SE/ SS for welding on / inside any pressure vessels
2
containing or contained flammable/ explosive material
All flammable materials to be removed in the effected areas and at
3
lower levels
Provision to contain sparks/ molten metal to be made to protect others
4
at lower level
Welding face shield, safety shoe, hand gloves and protective clothing to
5
be worn by welders
Provide fire water to put out any smoldering or mini fires provide fire
6
extinguishers / fire buckets as required with a fire watch
7 Employ / engage qualified welder and provide fire watch

After completion of work, check if there is any smoldering or burning


8
around or below

Prepared By : Approved By :

SE / SS : Project Manager :

Date : Date :

SE / SS: Safety Engineer/ Safety Supervisor

You might also like