Electrical Data PL320
Nominal resistance 1/5/10 kOhm
Resistance tolerance ±20 % Applications
Independent linearity ±1 % of meas. range • Valve controls
Electrical angle 340 ° • Joysticks / Master switches
Repeatability max. 0.1 °
Temperature coefficient of the voltage divider 50 ppm/°C Features
Recommended wiper current max. 1 µA • Connection by wires
Max. wiper current in case of malfunction 10 mA
• Small dimensions
Power rating P max. 0.5 W/40°C
• Design flexibility
Min. life (electrical) 10 Mio. cycles
• 5 Mio. cycles
• Excellent linearity,
up to ±0.25%
Mechanical Data
• Very good resolution
Mechanical range 360 ° (continuous)
better 0,1°
Torque (IP54) max. 0.7 Ncm
Min. life (mechanical) 5 Mio. cycles
Options
Max. permitted axial shaft load 1 N
• Resistance tolerance ±10%
Max. permitted radial shaft load 1 N
• Independent linearity
Operating temperature -25 ... +85 °C
±0.25%
Storage temperature -40 ... +105 °C
• Custom electrical angles and
Protection class IP54 switch functions available
• Mechanical end stops
Standards • Protection class IP65
Insulating resistance (500 VDC, 1bar, 2s) 10 GOhm • Custom shaft design
Dielectric strength (VAC, 50Hz, 1min, 1bar) 1 kV • Custom housing design
Vibration (Amax = 0.75mm, f = 30 … 2000 Hz) 10 g • Ball bearings / Sintered
Shock (half sine pulse, 7 ms) 50 g bronze bearings
• Customer specific wires
Errors and omissions excepted.
Subject to change without notice.
State: 15-Nov-2005
Contelec AG
Portstrasse 38
CH-2503 Biel/Bienne
Phone +41 (0)32 3665600
Telefax +41 (0)32 3665604
sales@contelec.ch