Released

Product Specification
B37686A Revision G

easYgen-1400 / easYgen-1600 / easYgen-1700 | easYgen-1800 easYgen-1800 Unique Features

 Large LCD display for
enhanced user experience
 Built-in Ethernet for remote
control, browser based visuali-
zation, and service tool con-
nectivity
 SD card slot for life long data
log

 Standard break-before-
make application in
Automatic Mains Failure Control  Stand-by operation
Do you package gensets, build switchgears or integrate systems? With several decades of experience in  AMF (Automatic Mains
genset control technology, Woodward's easYgen family offers a one-stop-shop solution for all of your genset Failure) operation
control needs. easYgen family genset controls cover the full range of generator system applications, ranging
from simple functions, such as start/stop of a genset to complex ones, like synchronizing and power manage-  ATS (Automatic Transfer
ment of large fleet of gensets.
Switch) operation
DESCRIPTION  Rental power operation
 Peak shaving operation
The Woodward easYgen-1000 series is designed for a single-generator set used in critical stand-by or prime
power applications with automatic changeover capability. The controllers include purpose-built algorithms and
logic to start, stop, control, and protect the genset, open/close circuit breakers and mains supply monitoring  Easy to set up and
with automatic changeover. Equipped with state-of-the-art communication interfaces, Woodward's easYgen- commission
1000 Series of AMF genset controllers provides exceptional versatility and value for OEM genset packagers.

The easYgen-1000 Series is available in four versions:  Best in class large liquid
crystal display
 easYgen-1800, advanced AMF controller comes with a large liquid crystal display (LCD), I/O expan-
sion capability, Ethernet and SD card connectivity
 Comprehensive engine,
 easYgen-1700, based on easYgen-1800 platform, easYgen-1700 offers all the capabilities except generator and utility
Ethernet and SD card connectivity and a 240x128 pixels Monochrome LCD in same size.
protection
 easYgen-1600, compact AMF controller offers a state of the art LCD, adequate on-board I/Os and
 Engine ECU interface to
common industrial connectivity

 easYgen-1400, small AMF controller contains a big liquid crystal display (LCD), configurable I/Os electronic engines
and electronic engine support.

ToolKit-SC is a single service tool for configuring easYgen-100 and –1000 series controllers. The module's  Programmable I/Os
password-protected integral front panel lets you adjust various parameters on-site.
 Six communication
FEATURES ports: Ethernet TCP/IP,
 Three-phase true RMS power sensing
CAN J1939, RS-485,
 Operation modes: AUTO, STOP, and MANUAL modes accessible through front panel, discrete inputs or RS232, USB,
via interfaces SD card slot
 Remote control via multiple interfaces and discrete inputs
 Direct support of several ECUs, such as Bosch, Cummins, John Deere, MTU, Perkins, Scania, Volvo, Woodward  Dedicated relays for
 Dedicated relay outputs for cranking and fuel solenoid
engine and breaker
 Event and data logging capabilities with real time clock
 Maintenance scheduler with multipurpose flexible timers interface
 Operating hours, start, maintenance counters and monitoring
 Three switchable parameter sets of AC system winding, Rated Voltage, Rated Frequency, Rated Current,  Switchable parameter
Rated Power, Rated Speed sets for mobile genset
 Can be configured from computer via USB or from front panel with password protection applications
 Manual breaker operation with tactile buttons on front panel
 Custom boot-up logo with adjustable screen display time
 Multilingual customizable user interface
 Event log and event-
triggered data log
 Released

SPECIFICATIONS
Power Supply Nominal CT secondary rating 5A
Operating Voltage 8.0 VDC to 35.0 VDC, Continuous Power Overload Measurement Max.: 10 A
(Reverse polarity protected) Supply. Current Accuracy 1%
Maximum supply voltage Short Time 80 V (5-10 s); Long T. 50 V Excitation current D+ 110 mA (12 V); 230 mA (24 V)
Minimum supply voltage 6.5 V (easYgen-1600, 1700 and
Maximum operating current (All relays closed, LCD bright) 1800)
(easYgen-1800) 450 mA (12 V); 220 mA (24 V) Start Relay and Rated 10Adc, 24Vdc running stand-
Maximum standby current (All relays closed, LCD dimmed) Fuel Relay Outputs alone. Rated 5Adc, 24Vdc when running
(easYgen-1800) 420 mA (12 V); 200 mA (24 V) in parallel with the FUEL/GAS relay.
Power Consumption <4 W (standby ≤ 2 W) (easYgen-1600/1700/1800 only)
Alternator Input Range 50 Hz/60 Hz Rated 5Adc, 24Vdc when running in par-
3-Phase 4-Wire AC30V - AC300V (ph-ph) (according allel with the FUEL/GAS relay.
3-Phase 3-Wire UL6200) (easYgen-1400)
Single-Phase 2-Wire AC15V - AC360V (ph-N) 2Adc at 24Vdc (acc. to UL 6200)
2-Phase 3-Wire AC30V - AC620V (ph-ph) Housing
AC15V - AC360V (ph-N) Case Dimensions easYgen-1700/1800: 237 x 172 x 45 mm
AC15V - AC360V (ph-N) easYgen-1600: 209 x 166 x 45 mm
AC-Measurement easYgen-1400: 135 x 110 x 44 mm
Phase-phase: 100…624 V：1%;
Voltage Accuracy Panel Cutout easYgen-1700/1800: 214 x 160 mm
(400/480 V % rated) 50…100 V：1.5 % easYgen-1600: 186 x 141 mm
easYgen-1400: 114 x 88 mm
Phase-phase: 100 .. 300 V：1%; 50 ..
Operating Conditions Temperature: (-25 to +70) °C;
100 V：1.5 % (according to UL6200) Humidity: max. 93%, noncondensing
Storage Condition Temperature: (-25 to +70) °C
Phase-neutral: 100…360 V：1%;
Humidity: max. 93%, noncondensing
50…100 V：1.5 % Protection Level IP65 in the front, mounted with kit
Minimum frequency Generator: 10 Hz; Mains: 27 Hz IP20 on rear side
Maximum frequency Generator: 99.5 Hz; Mains: 99.5 Hz Net Weight easYgen-1400: 0.3 kg
easYgen-1600: 0.56 kg
Frequency resolution 0.1 Hz (10…99 Hz)
easYgen-1700/-1800: 0.85 kg
Frequency accuracy ±0.1 Hz

APPLICATION

EG-1400*/-1600/-1700/-1800

EG-1600/-1700/-1800

EG-1700/-1800

EG-1800

Voltage (3Ph)

DI

Relay
Load Ethernet
RS 485
DI

Relay
Load Current (3ph) Outputs
Earth Current (1ph)

DI
RS232
Relay GSM Support

easYgen-1000
SD Card

Voltage (3Ph)

G D+

Fuel Solenoid &

Crank Relay

MPU and AI

I/O Expansion
CAN J1939
Module
30 30
* Only D+ monitoring in easYgen-1400
 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 33 34 35
POWER SUPPLY −
+

MPU+
D+

MPU−
FUE L/GAS

CAN H
RELAY 02

DI02

CAN L

A(+)

B(−)
RELAY 01

DI01

DI05

DI07
RELAY 03

DI03

SHIE LD
DI06
DI04

NC
SHIE LD

SHIE LD
STARTER
E-STOP

RELAY 04
CAN RS485
(J1939)
easYgen-1600

easYgen-1800

USB
1 2 3 4 5 6 7 8
ETHERNET
TXD

62 63 64
RS232
INNER DIAG RAM RXD
GND
MICRO SD

AI03 OIL PRESSURE

AI02 ENGINE TEMP.
DEY18d

AI01 FUE L LEVE L

GROUND
MAINS GENERATOR GENERATOR CURRENT
VOLTAGE AC VOLTAGE AC CURRENT AC AC

COMMON
RELAY 05 RELAY 06 L1 L2 L3 N L1 L2 L3 N L1 L2 L3 GND L1 GND

DI08

AI05

AI04
36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61
Released

easYgen-1400

easYgen-1700
TERMINAL DIAGRAM
 Released

FEATURES OVERVIEW
CONTACT easYgen-1000 Series
Model easYgen-1400 easYgen-1600 easYgen-1700 easYgen-1800
North & Central America
Measuring
Tel.: +1 (208) 278 3370
Generator voltage (3-phase/4-wire)
Tel.: +1 (970) 962-7272
Load current (3x true r.m.s.) 
 SalesPGD_NAandCA@woodward.com Mains voltage (3-phase/4-wire)
Earth current (1x true r.m.s.) — —  
South America
Control
Tel.: +55 19 3708 4760
Mains supply monitoring and automatic changeover
 SalesPGD_SA@woodward.com 
GCB and MCB control
Start/stop sequence for diesel and gas engines Diesel Diesel Diesel/Gas Diesel/Gas
Europe Isolated single unit operation
Tel. Stuttgart: +49 711 78954 510 AMF (Automatic Mains Failure operation)
Tel. Kempen: +49 2152 145 331 Stand-by operation 
 SalesPGD_EMEA@woodward.com Open transition (break-before-make)
ATS (Automatic Transfer Switching)
Middle East & Africa Protection
Tel.: +971 (2) 678 4424
Generator Voltage / # of level
 SalesPGD_EMEA@woodward.com /1 /2
Frequency / # of level
Voltage asymmetry — 
Russia
Rotation field — 
Tel.: +49 711 78954-515
Current    
 SalesPGD_EMEA@woodward.com
Overload    
Reverse Power — —  
China
Earth fault (measured) — —  
Tel.: +86 512 8818 5515
Mains Voltage    
 SalesPGD_CHINA@woodward.com
Frequency — —  
Voltage asymmetry — —  
India
Rotation field — —  
Tel.: +91 124 4399 500
Engine Over speed / # of level
 Sales_India@woodward.com /1 /2
Under speed / # of level
Speed signal    
ASEAN & Oceania
Crank disconnect    
Tel.: +49 711 78954 510
Battery voltage    
 SalesPGD_ASEAN@woodward.com
HMI, Counters, and Event Log
www.woodward.com Integral display with tactile buttons Monochrome LCD Monochrome LCD Monochrome LCD TFT LCD
(132 x 64) (132 x 64) (240 x 128) (480 x 272)
Subject to alterations, errors excepted. Customizable power-up text and image    
Front panel configuration with PIN protection    
Subject to technical modifications. Flush mounting    
This document is distributed for informa- Operating hours/start/maintenance counters    
tional purposes only. It is not to be con- 99 internal; extended
strued as creating or becoming part of any Event recorder with real time clock 50 50 99 data log using SD
Woodward Company contractual or war- card
ranty obligation unless expressly stated in a kWh, kvarh /- /- / /
written sales contract.
Switchable parameter sets — —  
We appreciate your comments about the I/Os and Interfaces
content of our publications. Please send
Discrete inputs 3 (+2 switchable as 1x E-Stop, 5x 1x E-Stop, 8x 1x E-Stop, 8x
comments including the document number
below to AI/DI) configurable configurable configurable
stgt-doc@woodward.com Relay outputs 6 6 8 8
Analog inputs 4x resistive (2 4x resistive, 1x
© Woodward switchable as AI/DI) 3x resistive resistive/current/v 5x resistive
All Rights Reserved olt
Speed input (MPU) 1 1 1 1
Aux. excitation (D+) 1 1 1 1
Ethernet (TCP/IP) — — — 1
CAN (J1939) 1 1 1 1
For more information contact:

External DI/DO via CAN bus -/- -/- 16 / 16 16 / 16

USB service port 1 1 1 1
RS485 — 1 1 1
RS232 — — 1 1
Micro SD card support — — — 1
Listings/Approvals
CE Marked 
UL / cUL Listing    
Part Numbers
Control with connectors and fastening kit 8440-2251 8440-2253 8440-2256 8440-2255
Spare connector kit 10-009-352 10-004-674 10-004-675 10-004-675
RELATED PRODUCTS
 Configuration tool ToolKit-SC (Product Specification # 37695): P/N 9927-2684
B37686A – 2019/12/Stuttgart
 I/O Expansion Board IKD1 (Product Specification # 37171): P/N 8440-2116
 Small Engine Control Module SECM-70 (Product Specification # 36363)