PP3-B1211E2

Second Edition

FMPC
Operator Quick Reference Guide 4 Scanner (SP) Start-up 6 Pre-operational Check in FRONTIER
Press the [Start] button to start up the scanner. [FRONTIER 350/370]
[FRONTIER 350/370] Select the "1 Pre-operational Check" on the Main
1 Start-up Menu screen and click [OK]. Then complete the
pre-operational check following the instructions
on the screens.
■ Start-up Procedures [FRONTIER 550/570]
Select.
1 Starting Up the Imaging Controller (1) Check if the built-in breaker is turned ON, then
turn ON the power switch.
Check if the peripherals are turned on, then start
up the Imaging Controller.

EZ1192

[FRONTIER 355/375/550/570]

Click.
LII987
C4C509
[FRONTIER 355/375/550/570]
2 Printer (LP) Start-up
IMPORTANT
When starting up the LP5500/5700, set the power Click the [Pre-operational Check] button on the
This Step is not required when "Time-startup" is switch to [STANDBY] during the post-operational Main Menu screen. Then complete the pre-
used. check. operational check following the instruction on the
[FRONTIER 350/370/355/375] screens.
ZII040 Click.
(1) Check if the built-in breaker is turned ON, then
turn ON the power switch.

5 Pre-operational Check in FMPC

Select the "1 Pre-operational Check" on the
Main Menu screen and click [OK]. Then
complete the pre-operational check following
the instructions on the screens.
Select.
LII988

EZ627 3 FMPC Start-up

(2) Turn the power switch to [STANDBY] after the Make sure that the monitor is turned ON, and
machine starts up. then turn ON the FMPC.

Click.

EZ626

Power Switch
NMP010
2 Print Status Notice Screen

● Print Status Notice Screen

● "Next Print" List

IMPORTANT
The order in the "Next Print" list remain even after the
FMPC is shut down the restarted, while the orders
already transferred to the "Done" list will be deleted after
the restart of FMPC.

(1) Lists up the orders done in the Imaging Controller

or FRONTIER. When printing is completed, they ● "Done List"
are moved to the Complete List. (1) Lists up the completed orders in reverse
(2) Up to 15 order lines are visible within the list box, chronological order.
and up to 999 lines can be accepted. (2) Up to 5 order lines are visible within the list box,
(3) To select the order, click the line. To cancel and up to 999 lines can be accepted.
● [Print Stop] / [Delete]
selecting the line, click the line itself again. (3) The line in this box cannot be selected.
toggle button
Selecting of order(s) is available only when (4) This list box displays the following order (1) Stops the current image processing.
transferring of orders is stopped (when [Resume] information. NOTE: The images that were already
button is displayed). [A] Status: (not used) transferred from FRONTIER are not
(4) This list box displays the following order [B] Order No.: Shows order no. (Alphabet + 5-diigit deleted.
information. numerals) for imaging Controller or sorting No. (2) Removes the waiting order from the waiting
[A] Status: Displays the status as "Printing...". for FRONTIER. list.
[B] Order No.: Shows order No.(Alphabet + 5-digit [C] Service Name: "Print Service", etc.for DI
numerals) for Imaging Controller or sorting No.
● [Next Order Stop]/[Resume] This button is activated in the following
printing or "Film Input" for FRONTIER film cases.
for FRONTIER. printing.
toggle button
(a) When selecting the FRONTIER order in
[C] Service Name: "Print Service", etc. for DI [D] Image Q'ty: Shows number of images in the [Next Order Stop]: the list.
printing or "Film Input" for FRONTIER film order. Stops sending images to printer after the current (b) When printing is currently in progress.
printing. [E] Total: Shows the total number in the order. order is transferred to printer. Receiving of orders For the DI orders, delete them in the
[D] Image Q'ty: Shows number of images in the [F] Paper Width: Paper width (of the first image) from FRONTIER and Imaging Controller is not Imaging Controller.
order. [G] End Time: Order registering time (Imaging stopped.
[E] Total: Shows the total number in the order. Controller) [Resume]:
[F] Paper Width: Paper width (of the first image) - End time indicates the time when transferring Resumes transferring the images to the printer by
[G] Set Time: Order registering time (Imaging of an order to printer is completed. clicking the [Resume] button. After it is clicked, it
Controller) - [Status] is not used. becomes [Next Order Stop].
Order receiving time (FRONTIER) - Other information is the same as that in the
The width of columns can be changed with the Print Waiting List.
mouse operation. Data is reserved until the system is shut down.
The width of columns can be changed with the
mouse operation.

● [Main Menu] button ● [Precedence] button ● [Memory Clear] button

Returns to the "Main Menu" screen. Select the order in the upper list and click this button. Clears the order already transferred to the image
The specified order will be moved to the top of the list processing memory. Number of sheets indicated
and processed preferentially. in "Waiting" status in "Sheets being processed".
By clicking it again, the preferential setting is IMPORTANT
cancelled. Note that executing of [Order Clear] deletes all
images of the order that is currently being
processed.
3 Measures for Paper Width Type Mismatch Error
Operating Precautions

 When "W-8102" Message Dialog Appears ! When "W-1621" Message Dialog Appears 1 The print size information registered in the "424 Print Size Setup" screen must match that of SP. When the
order is received from the SP while they are mismatched, the W-1623 (size not registered) message
The print-waiting orders that are listed up in the Mismatching of papers occurred in the same
appears and this order is not printed. When this happens, register the proper size, then resume printing on
"Next Print" list cannot be printed with the order, and no correct paper magazine was
the "Print Status Notice" screen.
currently installed paper(s). installed. This problem occurs especially when
the paper width of index print is different from that
2 To start up and shut down the FMPC system, make sure to use the following procedures.
of normal print.
Start-up: [Imaging Controller] -> [Printer<LP>(Timer-startup)] -> [FMPC] -> [Scanner<SP>]
Shut-down: [Scanner<SP>] -> [FMPC with Printer<LP>] -> [Imaging Controller]

3 Make sure to restart the FMPC so that the setting is sent to the Imaging Controller when adding or
updating the print size on the "424 Print Size Setup" screen in the "Setup and Maintenance" menu.

4 To shut down the FMPC and SP, make sure to turn off the SP then FMPC in this order. If they are turned
off in the reverse order, a communication error may occur during the completion process.

Wait for a moment with no operation, so this 5 When the FMPC is restarted (EX: after the print size is updated), the scanner<SP> must also be restarted.
message will disappear, then other print-waiting If the communication between FMPC and SP is not done well, the "E-1425" message appears on the
orders with the setting of paper that matches the scanner<SP>.
currently installed paper will be printed IMPORTANT
automatically, while skipping the orders with the If the [Abort] button is clicked during processing of the
mismatched paper setting. orders, transferring of orders is stopped, but they
remain in the system.
Click the [Resume] button on the printing status screen
To replace the magazine with the correct one,
to start printing from the first frame again.
click the [OK] button. Unless the orders with
Click the [OK] button, then to replace the magazine
mismatched paper are urgent ones, it is
with correct one, and then to start printing again.
recommended to print the possible orders first,
then the remaining orders after replacing the
magazine. [Order] : Outputs forcibly the current order.
[Image] : Outputs forcibly the current image.
[OK] : Replace the magazine with the correct
one, then click this button to start
When "W-1627" Message Dialog Appears printing.
Before clicking the [OK] button, make
This message appears when mismatching of
sure that the printer (LP) is initialized.
surface or emulsion type occurred between the
[Abort] : Returns to the printing screens where
upper and lower magazines. Click the [Abort]
you can start printing by clicking the
button, then select [Upper] or [Lower] magazine,
[Resume] button.
and then resume printing.
When the two paper widths are displayed (89mm,
127mm), the problem is the index paper
mismatch. Set one of the displayed widths, of
paper to solve the problem.
4 Shut-down

■ Shut-down procedures [FRONTIER 355/375/550/570] (2) On the "Next Time ON Date/Time check" (2) The Confirmation dialog appears. Click the [OK]

1 (1) Click the [Post-operational Check] button. screen, click [Shut Down]. button.
Post-operational Checks and Shut-down
in FRONTIER Then perform the post-operational check
following the instructions on the screens.
[FRONTIER 350/370]
Click
(1) Select the "Post-operational Checks" and
click [OK]. Then perform the post-operational
check following the instructions on the Click.
screens.
To shut down the computer, click the [Exit]
Select.
button while pressing the [Shift] button.

(3) Select [Shut Down] from the [Start] menu at the

bottom of the desktop.
Click.
[Windows NT] [Windows 2000]

3 Shutting Down Imaging Controller

(1) Click the [Exit] icon on the DI changer.
(2) On the "Shut Down" screen, click [OK].
Click.

Click.

(2) On the "Next Time ON Date/Time

Confirmation" screen, click [Shut Down].

Click.

2 Post-operational Checks and Shut-down

in FMPC

If the [Next Oder Stop] button appears, click it

to switch to [Resume] button.
Click.
(1) Click the "Post Check" in the bottom left-hand
corner of the screen.

FUJI PHOTO FILM CO., LTD

26-30, Nishiazabu 2-chome, Minato-ku 106-8620, Japan.

Click.
Ref. No. PP3-B1211E2 ESD-05.05-FP Printed in Japan