TM40 Touch Interface 2.
Mount the back plate to the wall by securing one screw in
each of the dedicated mounting holes. Ensure that the UP
Module arrow on the back plate is in the up position.
Quick Install Guide TM40-EI00
3. Assemble both items by joining the hooks on the back plate
to their respective slots on the front housing assembly.
Hooks on back plate
Installation
1. Using a screwdriver, pry the front housing assembly from
the back plate.
Front housing
assembly
NOTE: Make sure to connect the unit’s 5-pin connector before
proceeding to the next step.
Printed in Canada | 06/2011 TM40 Quick Install Guide
4. Secure the front housing assembly to the back plate by Wiring Diagram
snapping it into place.
Kpd 1 or Kpd 2
CONTROL PANEL
N.C. COM
BLUE
AUX+ AUX- GRN YEL
ZONE/TEMP
RED
BLK
GRN
The installation process is complete. YEL
Technical Specifications
Power Input 9 to 16 Vdc
Consumption 110 mA
Display 16-bit, color LCD; 5.4 x 9.5 cm (2.1 x 3.7 in.)
Resolution 480 x 272 pixels
Dimensions 12.4 x 8.1 x 1.6 cm (4.9 x 3.2 x 0.7 in.)
Sensors Indoor temperature sensor
TM40 to Panel Connections
As shown in Wiring Diagram, the red, black, green, and yellow Warranty: For complete warranty information on this product, please
wires on the TM40 must be connected to their corresponding refer to the Limited Warranty Statement found on the Web site
labeled terminals on the control panel’s PCB. The blue wire is www.paradox.com/terms. Your use of the Paradox product signifies your
acceptance of all warranty terms and conditions.
connected to either a keypad zone or external temperature © 2011 Paradox Ltd. All rights reserved. Specifications may change
sensor. without prior notice. www.paradox.com
TM40 Quick Install Guide Printed in Canada | 06/2011
