Scribd
Upload
342 views3 pages

Instruction IAW 5sfstilo - 800

The document provides pinout information for an ECU as well as instructions for enabling reading of the ECU and qualifying the reading. It lists the pins for plugs A and B of the ECU, including pins for ignition, power supply, ground, K line, and CAN lines. It also explains that the enable pin must be connected to ground to read the ECU and the bootstrap pin must be briefly connected to ground after powering the ECU to identify it.

Uploaded by

soptea
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
342 views3 pages

Instruction IAW 5sfstilo - 800

The document provides pinout information for an ECU as well as instructions for enabling reading of the ECU and qualifying the reading. It lists the pins for plugs A and B of the ECU, including pins for ignition, power supply, ground, K line, and CAN lines. It also explains that the enable pin must be connected to ground to read the ECU and the bootstrap pin must be briefly connected to ground after powering the ECU to identify it.

Uploaded by

soptea
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

ECU : MAGNETIMARELLI IAW-5SF Stilo 1.

6 16V

Pin out - Front view :


Plug A: Plug B:
- Pin 12 Ignition - Pin 5 Ground
- Pin 16 Power Supply - Pin 6 Ground
- Pin 29 Ignition - Pin 21 Ground
- Pin 10 K line - Pin 22 Ground
- Pin 36 Can L
- Pin 52 Can H

Piasiniengineering info@piasiniengineering.it - http://www.piasiniengineering.it


Tel: +390342489060 - Fax: +390342488298
Enable's Pin:

This is the Enable's Pin, that you have to connect to the ground, after this you can read the ECU.

Piasiniengineering info@piasiniengineering.it - http://www.piasiniengineering.it


Tel: +390342489060 - Fax: +390342488298
BootStrap's Pin:

This is the BootStrap's Pin, you have to connect to the ground to qualify the reading of ECU, then supply the
ECU and when you click on the Identify Button remove this pin from the ground

Piasiniengineering info@piasiniengineering.it - http://www.piasiniengineering.it


Tel: +390342489060 - Fax: +390342488298

You might also like