Pipe Hangers
Pipe hangers are used to support a sprinkler piping system from the building structure. Two or more listed components may be
required to form a complete hanger. The specific components required depend upon the type of building construction and the pipe
size.
Pipe Hangers
Hanger For
Rod Nominal
Size, Pipe
Product in. Component Size,
Designation NC Description in.
MP-MX 125 M16 Pipe Ring 125 mm
Clamp
MP-MX 133 M16 Pipe Ring 133 mm
Clamp
MP-MX 5” M16 Pipe Ring 5 in.
Clamp
MP-MX 159 M16 Pipe Ring 159 mm
Clamp
MP-MX 6” M16 Pipe Ring 6 in.
Clamp
Hanger Rod Component Nominal Pipe
Product Designation
Size, mm Description Sizes, mm
MAB-M10 10 Beam Clamp 20 through 100 mm
MAB-10 10 Beam Clamp 20 through 100 mm
MAB-M12 12 Beam Clamp 20 through 200 mm
MAB-13 12 Beam Clamp 20 through 200 mm
MAB-M16 16 Beam Clamp 20 through 300 mm
MAB-17 16 Beam Clamp 20 through 300 mm *
MQT-G M10 10 Swivel Beam Clamp 20 through 100 mm
* Approved for use with the set screw on the load side
Hanger For
Rod Nominal
Size, Pipe
Product inch Component Size,
Designation (metric) Description in.
LH 3/8 Loop Hanger 3/4
(M10) through 4
© 2007-2012 FM Approvals. All rights reserved. 1 of 2
LH 1/2 Loop Hanger 6 and 8
(M12)
SDC EG 1/2 Clevis 2-1/2
(M12) Hanger and 3
SDC EG 5/8 Clevis 4 and 5
(M16) Hanger
SDC EG 3/4 Clevis 6 and 8
(M20) Hanger
Hanger
Rod For
Size, Nominal
in. Pipe
Product (mm) Component Size,
Designation Description in.
SLC-EG 3/8 Clevis 2 and
(M10) Hanger 2-1/2
1/2
SLC-EG " 3
(M12)
5/8
SLC-EG " 4 and 5
(M16)
3/4
SLC-EG " 6 and 8
(M20)
Company Name: Hilti AG
Company Address: Feldkircherstrasse 100, Box 333 , 9494 Schaan , Liechtenstein
Company Website: http://www.hilti.com
Listing Country: Liechtenstein
Certification Type: FM Approved
© 2007-2012 FM Approvals. All rights reserved. 2 of 2
