Manitowoc 11000-1

Product Guide
ASME B30.5
Metric / Imperial

Features
• 100 t (110 USt) capacity
• 61,0 m (200 ft) heavy-lift boom
• Max boom + jib combination:
57,9 m (190 ft) + 18,3 m (60 ft)
• 213 kW (285 HP) engine
• 163 m/min (535 fpm) maximum line speed
• 113 kN (25,200 lb) rated line pull
 Features

Energy saving systems

Green-Engine mode conserves fuel during full speed drum
operation under load, at a lower engine RPM. Other available
options include Green-Winch Mode and Auto Idling Stop Mode.

Self-erecting counterweight
Eliminates the need for an assist crane, and also
allows for reduced counterweight chart operation.

Retractable crawlers
Crawlers can be extended and retracted for better jobsite
maneuverability. On some models, these crawlers can also ship
attached for easier transport and quicker setup.

2
 Contents

Specifications 4
Outline dimensions 7
Winch performance data 13
Load chart notes 14
Boom combinations 15
Heavy-lift boom range / charts 16
Fixed jib boom range / load charts 18
Clamshell 21
Manitowoc Crane Care 22

Manitowoc 11000-1 3
 Specifications
Upperworks
Drums

Engine
Front and rear drums for load hoist powered by
variable displacement piston-type motors, driven
HINO J08E-UV, 6 cylinder, water-cooled diesel, through planetary reducers. Powered hoisting/
direct fuel injection with turbocharger, 213 kW (285 lowering and free-fall operation is standard. Drum turn
HP) at 2100 high-idle RPM. Maximum torque 1017 indicators for front and rear drums are also standard.
N•m (750 lb•ft) net at 1,600 rpm; Interim Tier 4/ Drums: (front and rear) 614 mm (24.2") P.C.D. x
Stage IIIB (Required for sale in the US/Canada/ 617 mm (24.3") wide drums, grooved for 26.0 mm
Europe; requires "Ultra Low Sulfur Diesel") wire rope.
HINO J08E-VM, 6 cylinder, water-cooled diesel, Brakes: Counterbalance valve and spring set
direct fuel injection with turbocharger, 213 kW (285 hydraulically released multiple disk brake mounted on
HP) at 2100 high-idle RPM. Maximum torque 1017 hoist motor. External ratchet is fitted for locking drum.
N•m (750 lb•ft) net at 1,600 rpm; Tier 3 (Required
for sale outside the US/Canada/Europe) Wire rope capacity:
Front drum . . . . . . . . . 235 m (771 ft) working length
One diesel fuel tank, 400 liters (105 gallons) capacity. Rear drum. . . . . . . . . . 160 m (525 ft) working length
Two 12 volt 136 AH capacity batteries, 24 volt system Line speed: Single line on the first drum layer
and 90 amp alternator. Hoisting:. . . . . . . . . . . . . . . . 120m/min (390 ft/min)
All wiring harnesses and connectors are numbered for Lowering: . . . . . . . . . . . . . . . 120m/min (390 ft/min)
easier servicing. Machine is equipped with individual Optional third drum: grooved for 22 mm wire
fused branch circuits. rope; free-fall is optional.
Wire rope working length . . . . . . . . . . . . 145m (476').

Controls Swing system

Full-flow hydraulic control system for constant variable

pressure to front and rear drums, boom hoist brakes Swing unit: Powered by a hydraulic piston-type motor
and clutches. Controls respond instantly to the touch, driving spur gears through planetary reducers, the
delivering smooth function operation. swing system provides 360° rotation.
Swing brake: A spring-set, hydraulically released
multiple-disc brake is mounted on swing motor.
Hydraulic system
Swing lock: 4-Position lock for transportation.
All three variable displacement piston-type pumps Rotating bed turntable: Single-row ball bearing with
are driven by a heavy-duty pump drive. One of these an integral internally cut swing gear.
pumps is used in the left propel circuit and hook
hoist circuit, and can accommodate an optional third Swing speed: 4.0 rpm
circuit. Another is used in the right propel circuit,
boom hoist circuit and hook hoist circuit. The third Boom support system
variable displacement pump is used in the swing circuit.
In addition, two gear pumps are used in the control
system and auxiliary equipment, and two gear pumps Single drum powered by a hydraulic axial piston motor
serve the brake cooling system. through a planetary reducer.
Brake: A spring-set, hydraulically released multiple-
Maximum pressure rating. . . . . 31.9 MPa (4,630 psi)
disc brake is mounted on the boom hoist motor. An
Load hoist, boom hoist and propel. . 2 Piston pumps external ratchet is fitted for locking the drum.
Swing . . . . . . . . . . . . . . . . . . . . . . . . 1 Piston pump
Control system and auxiliary. . . . . . . . 2 Gear pumps Drum: Single drum, grooved for 16 mm diameter wire
Brake cooling system. . . . . . . . . . . . . 2 Gear pumps rope. Boom hoist reeving is 12-part line.
Reservoir capacity: . . . . . . . 440 liter (116 US gallon) Wire Rope Capacity:
Cooling: . . . . . . . . . . . . . . . . oil-to-air heat exchanger Drum 150 m (492 ft) working length.
Filtration: full-flow and bypass type with replaceable
paper elements.
4
 Specifications
Line speed: Single line on first drum layer. width. The track rollers are sealed for maintenance-free
operation.
Hoisting . . . . . . . . . . . . . . . . . 70m/min (230 ft/min)
Lowering. . . . . . . . . . . . . . . . . 70m/min (230 ft/min) Crawler brakes: multiple disk type, spring set
hydraulically released parking brakes are built into each
Gantry propel drive.
Crawler shoes
914 mm (36") wide crawler.
This high folding type gantry is fitted with a sheave
frame for boom hoist reeving. It provides full up, full Travel speed
down positions. (High/Low) 1.73/1.2 km/h (1.07/0.71 mph)
Attachments
Counterweight

Boom
Upper weight (5 pieces): 31,300 kg (69,000 kg)
Carbody weight (2 pieces): 14,400 kg (31,750 lb)
Welded lattice construction using tubular, high-tensile
Operator’s cab steel chords with pin connections between sections.
Two idler sheaves and three point sheaves are standard.
Totally enclosed, full vision cab fitted with tinted Basic boom length 12,2 m (40'). Basic boom consists
safety glass and opening front window. A fully of the boom butt 5,8 m (19') and boom top 6,39 m
adjustable, highbacked seat with arm rests. Short (21').
handle control levers; electronic twist grip hand
throttle. An air conditioner, a signal horn and Optional boom inserts are welded lattice construction
windshield wiper are standard. with tubular, high-tensile steel chords and pin
connections on each one of 3,0 m (10'), 6,1 m (20')
Lights: and 12,2 m (40') inserts.
2 - Front flood lights
1 - Cab inside light Maximum total length of boom 61,0 m (200').

Safety device
New easy to read at a glance LMI and maintenance Fixed jib
display.
Lowerworks The optional fixed jib employs welded lattice
construction with tubular, high-tensile steel chords
with pin connections between sections.
Carbody
Basic jib length 9,14 m (30'). Basic jib length consists of
jib butt section 4,57 m (15') and jib top 4,57 m (15').
The durable carbody features steel welded construction Optional jib boom inserts of 3,0 m (10'), 6,1 m (20')
with extendible axles. are available for extension capabilities up to 18 m (60').
Maximum total length of boom and jib 57,9 m (190')
Crawlers + 18 m (60') is 76,2 m (250').
Tool and accessories
Crawler assemblies can be hydraulically extended for
wide-track operation or retracted for transportation. A set of tools and accessories are furnished.

Crawler belt tension adjusted with hydraulic jack and Optional Equipment
maintained by shims between idler block and frame.
The independent hydraulic propel drive is built into Optional: Blocks and hooks each with roller
each crawler side frame. Each drive consists of a bearing sheaves grooved for 26.0 mm diameter wire
hydraulic motor propelling a driving tumber through rope, and roller bearing swivel with hook latch.
a planetary gearbox. Hydraulic motor and gear box
are built into the crawler side frame within the shoe

Manitowoc 11000-1 5
 Specifications
11.3 t swivel hook and weight ball, 460 kg
(15 USt ball hook, 1,310 lb wedge socket for 26
mm wire rope.)

35 t hook block, 700 kg with one 617 mm

Nominal O.D. roller bearing sheave.
(40 USt hook block, 2,311 lb with three 24"
Nominal O.D. roller bearing sheaves.)

70 t hook block, 900 kg, three 617 mm Nominal

O.D. roller bearing bearing sheaves.
(75 USt hook block, 3,820 lb, with four 24"
Nominal O.D. roller bearing sheaves.)

90 t hook block, 1 300 kg, with four 617 mm

Nominal O.D. roller bearing sheaves.
(110 USt hook block, 2,946 lb with four 24"
Nominal O.D. roller bearing sheaves.)­

Optional: Detachable upper boom point with one

575 mm Nominal outer diameter roller bearing steel
sheave grooved for 26mm rope for liftcrane.

Machine inclination sensor.

Swing angle detection and angle limiter.

Counterweight detection.

Hydraulic tagline.

External lamp for overload alarm.

Working weight

Approximately 90,000 kg (198,500 lb) including

upperworks and lowerworks, full upper
counterweights, full carbody counterweights, and
12,2 m (40') basic boom.
Ground pressure

Approximately 88.8 kPa (12.9 psi) with basic boom

and no load.
Gradeability
With basic boom: 40%.

6
 Specifications

Manitowoc 11000-1 7
 Outline dimensions

8
 Outline dimensions
Upperworks x1
Length 12,09 m 39' 8"
H Width 3,61 m 11' 10"
Height 3,32 m 10' 11"
Weight 43 150 kg 95,128 lb
Note: Weight includes base machine, crawler, gantry,
L maximum hoist and whip lines on drums, boom butt,
full hydraulic fluid reservoir, and one third tank of fuel.

Upperworks x1
Length 8,21 m 26' 11"
Width 3,61 m 11' 10"
H
Height 3,32 m 10' 11"
Weight 41 090 kg 90,586 lb
Note: Weight includes base machine, crawler, gantry,
L maximum hoist and whip lines on drums, full hydraulic
fluid reservoir, and one third tank of fuel.

Upperworks x1
Length 8,21 m 26' 11"
H Width 3,61 m 11' 10"
Height 3,32 m 10' 11"
Weight 40 220 kg 88,668 lb
Note: Weight includes base machine, crawler, gantry,
L maximum hoist and whip lines on drums without
self-removal unit, full hydraulic fluid reservoir, and one
third tank of fuel.

Upperworks without crawlers x1

H Length 12,09 m 39' 8"
Width 2,99 m 9' 10"
Height 2,93 m 9' 8"
L Weight 27 870 kg 61,442 lb
Note: Weight includes base machine, gantry, maximum
hoist and whip lines on drums, boom butt, full hydraulic
fluid reservoir, and one third tank of fuel.

Upperworks without crawlers x1

H Length 7,70 m 25' 3"
Width 2,99 m 9' 10"
Height 2,93 m 9' 8"
L Weight 25 810 kg 56,900 lb
Note: Weight includes base machine, gantry, maximum
hoist and whip lines on drums, full hydraulic fluid
reservoir, and one third tank of fuel.

Option

Manitowoc 11000-1 9
 Outline dimensions
Crawlers x2
Length 6,28 m 20' 7"
H Width 0,91 m 3' 0"
Height 0,98 m 3' 3"
L Weight 7 640 kg 16,843 lb

Upper counterweight x1
Length 4,43 m 14' 6"
W Width 1,19 m 3' 11"
Height 0,83 m 2' 9"
Weight 8 310 kg 18,320 lb
H

H Upper counterweight (R) x2

L Length 1,45 m 4' 9"
Width 1,17 m 3' 10"
W
Height 0,88 m 2' 11"
Weight 5 750 kg 12,677 lb

Upper counterweight (L) x2

H
L
Length 1,45 m 4' 9"
W Width 1,17 m 3' 10"
Height 0,88 m 2' 11"
Weight 5 750 kg 12,677 lb

Carbody counterweight x2
L
Length 1,90 m 6' 3"
W H Width 1,79 m 5' 10"
Height 0,59 m 1' 11"
Weight 7 200 kg 15,873 lb

Option

10
 Outline dimensions
L H Self removal unit x1
Length 1,59 m 5' 3"
Width 1,90 m 6' 3"
Height 0,98 m 3' 3"
W Weight 870 kg 1,918 lb

Boom butt 5,8 m (19') x1

Length 5,97 m 19' 7"
Width 1,49 m 4' 11"
H Height 1,70 m 5' 7"
Weight 1 475 kg 3,252 lb
L

Boom top 6,4 m (21') x1

Length 6,91 m 22' 8"
Width 1,50 m 4' 11"
H Height 1,31 m 4' 4"
Weight 1 170 kg 2,580 lb
L

Boom insert 3,0 m (10') x 1,2

Length 3,16 m 10' 4"
Width 1,49 m 4' 11"
H Height 1,31 m 4' 4"
Weight 310 kg 685 lb
L

Boom insert 6,10 m (20') x 1,2

Length 6,21 m 20' 5"
Width 1,49 m 4' 11"
H Height 1,31 m 4' 4"
Weight 520 kg 1,145 lb
L

Boom insert 12,2 m (40') x 1,2,3

Length 12,31 m 40' 5"
Width 1,49 m 4' 11"
Height 1,31 m 4' 4"
H
Weight 960 kg 2,115 lb
Note: Use one "A" type insert with lug required for any
L boom combinations that require a 12,2 m (40 ') insert.

Option

Manitowoc 11000-1 11
 Outline dimensions
Fixed jib butt x1
Length 4,81 m 15' 9"
H Width 0,80 m 2' 8"
Height 0,80 m 2' 8"
L
Weight 200 kg 440 lb

Fixed jib top x1

Length 5,00 m 16' 5"
H Width 0,79 m 2' 7"
Height 0,80 m 2' 8"
L
Weight 280 kg 617 lb

Fixed jib insert 3,0 (10') x1

Length 3,11 m 10' 2"
H
Width 0,80 m 2' 8"
L Height 0,80 m 2' 8"
Weight 100 kg 220 lb

Fixed jib insert 6,1 m (20') x1

H Length 6,16 m 20' 3"
Width 0,80 m 2' 8"
L Height 0,80 m 2' 8"
Weight 180 kg 395 lb

Fixed jib strut x1

H Length 3,62 m 11' 11"
Width 0,84 m 2' 9"
L
Height 0,62 m 2' 0"
Weight 250 kg 550 lb

Option
12
 Winch performance data
Line pull
Rated line pull *Maximum line pull
kg (lb) kg (lb)

11 420 21,200
Front drum
(25,200) (46,800)

11 420 21,200
Rear drum
(25,200) (46,800)

7 700 15,600
Optional 3rd drum
(17,700) (34,400)

* Maximum line pull is not based on wire rope strength.

Wire rope specifications

Working Breaking
Use Specs Diameter
length strength
mm
m (ft) kg (lb)

Front IWRC C/O 26,0 235 54 430

drum 6 X Fi (29) (771) (120,000)

Rear IWRC C/O 26,0 160 54 430

drum 6 X Fi (29) (525) (120,000)

Boom hoist IWRC C/O 16,0 150 21 410

drum 6 X Fi (31) (492) (47,200)

Optional IWRC C/O 22,0 145 37 00

3rd drum 6 X Fi (29) (476) (81,600)

Front and rear winch

Line speed
m/min (ft/min)

Layer 1 2 3 4 5

Single line pull

kg (lb)

0 125 133 142 151 160

(0) (410) (436) (466) (495) (525)

2 268 124 132 141 150 159

(5,000) (406) (434) (463) (492) (522)

4 536 108 108 108 108 108

(10,000) (355) (355) (355) (355) (355)

6 804 72 72 72 72 72
(15,000) (237) (237) (237) (237) (237)
Rated line pull

9 072 54 54 54 54 54
(20,000) (177) (177) (177) (177) (177)

11 340 43 43 43 43 43
(25,000) (142) (142) (142) (142) (142)

13 608 36 36 36 38 41
(30,000) (118) (118) (119) (126) (133)

15 876 32 34 36 38 –
(35,000) (104) (111) (118) (125) –

18 144 32 34 – – –
(40,000) (104) (111) – – –

NOTE: Line speeds and line pull based on single line.

Line pulls are not based on wire rope strength.

Manitowoc 11000-1 13
 Load chart notes
1. Rated loads included in the charts are the 9. Boom lengths for fixed jib mounting are 24,4 m
maximum allowable freely suspended loads at a (80 ft) to 57,9 m (190 ft).
given boom length, boom angle and load radius,
and have been determined for the machine 10. The total load that can be lifted by the upper
standing level on firm supporting surface under boom point is: the rated load for the boom
ideal operating conditions.The user must limit or (without upper boom point installed) minus 200 kg
de-rate rated loads to allow for adverse conditions (420 lb); however, the upper boom point rated
(such as soft or uneven ground, out-of-level load should not exceed 10 800 kg (24,000 lb).
conditions, wind side loads, pendulum action,
11. An upper boom point cannot be used on a 61 m
jerking or sudden stopping of loads, inexperience
(200 ft) boom length.
of personnel, multiple machine lifts, and traveling
with a load). 12. The boom should be erected over the front of
the crawlers, not laterally. When erecting and
2. Capacities do not exceed 75% of minimum
lowering the boom with a length of 57,9 m (190
tipping loads. Capacities based on factors
ft) with jib, blocking must be placed at the end of
other than machine stability such as structural
the crawlers. See operator's manual for details.
competence are shown by asterisk * in the charts
located in the operator's crane cab. 13. Least stable position is over the side.
3. The machine must be reeved and set-up as stated 14. Maximum hoist load for number of reeving parts
in the operation manual and all the instruction of line for hoist rope.
manuals. If these manuals are missing, obtain
replacements. Boom backstops are required for Maximum load for main boom
all boom lengths. Gantry must be in the fully No. of parts of line 1 2 3 4 5
raised position for all operations. Crawlers must Maximum loads kg 11 420 22 861 34 292 45 722 57 153
be fully extended and be locked in position. The (lb) (25,200) (50,400) (75,600) (100,800) (126,000)
crane must be leveled to within 1% on a firm
supporting surface. No. of parts of line 6 7 8

Maximum loads kg 68 583 80 014 100 000

4. Do not attempt to lift where no radius or load is (lb) (151,200) (176,400) (220,000)
listed as crane may tip or collapse.
Maximum load for fixed jib
5. Attempting to lift more than rated loads may No. of parts of line 1
cause machine to tip or collapse. Do not tip Maximum loads kg 10 800
machine to determine capacity. (lb) (24,000)

6. Weight of hooks, hook blocks, slings and other Maximum load for upper
lifting devices are a part of the total load. Their boom point
total weight must be subtracted from the rated No. of parts of line 1

load to obtain the weight that can be lifted. Maximum loads kg 10 800
(lb) (24,000)

7. When lifting over boom point with jib or upper

boom point installed, rated loads for the boom 15. Lifting capacities listed apply only to the machine
must be deduted as shown below. as originally manufactured for and supplied by
Manitowoc Cranes, Inc. Modifications to this
Jib length m Upper boom 9,1 12,2 15,2 18,3
machine or use of equipment other than that
(ft) point (30) (40) (50) (60) specified can reduce operating capacity.
Deduct kg 200 1200 1700 2400 3100
(lb) (420) (2,500) (3,700) (5,100) (6,700) 16. Designed and rated to comply with ASME Code
B30.5.

Operation of this equipment in excess of rated loads or disregard of
8. The total load that can be lifted by the fixed jib is instruction voids the warranty.
limited by rated jib loads. The total load that can
be lifted with the upper boom point is limited by
rated upper boom point loads.

14
 Boom combinations
No. 11000-1 heavy-lift No. 11000-1 fixed jib
boom combinations combinations
Fixed jib
Boom inserts
inserts
Boom Fixed jib
3,1 m 6,1 m 12,2 m 3,1 m 6,1 m
length length
(10 ft) (20 ft) (40 ft) (10 ft) (20 ft)
m (ft) m (ft)

12,2 (40) – – – 9,1 (30) – ­–

15,2 (50) 1 – – 12,2 (40) 1 –
4,6 m (15 ft)
18,3 (60) 2 – – 15,2 (50) – 1 jib top

21,3 (70) 1 1 – 18,3 (60) 1 1

24,4 (80) 2 1 – Model 11000-1 3,1 m (10 ft)
fixed jib jib insert
27,4 (90) 1 2 – 18,3 m (60 ft)

30,5 (100) 2 2 – 6,1 m (20 ft)

jib insert
33,5 (110) 1 1 1*
36,6 (120) 2 1 1*
4,6 m (15 ft)
39,6 (130) 1 2 1* 6,4 m (21 ft) jib butt
No. 11000-1
42,7 (140) 2 2 1* boom top

45,7 (150) 1 1 2* 6,4 m (21 ft)

boom top
48,8 (160) 2 1 2*
51,8 (170) 1 2 2*
54,9 (180) 2 2 2* 12,2 m (40 ft)
boom insert
57,9 (190) 1 1 3*
12,2 m (40 ft)
61,0 (200) 2 1 3* boom insert

* NOTE: One 40 ft (12,20 m) boom insert

with lug 40A is required for fixed jib. When
no jib is installed a 40 ft (12,20 m) boom
can be used instead of 40A.

12,2 m (40 ft)

boom insert
12,2 m (40 ft)
boom insert

Model 11000-1
main boom
57,9 m (190 ft)
Model 11000-1
main boom
61,0 m (200 ft) 12,2 m (40 ft)
boom insert
12,2 m (40 ft)
boom insert

6,1 m (20 ft)

boom insert

6,1 m (20 ft)

3,0 m (10 ft) boom insert
boom insert

3,0 m (10 ft)

boom insert 3,0 m (10 ft)
boom insert

5,8 m (19 ft)

boom butt 5,8 m (19 ft)
boom butt

Model 11000-1 Model 11000-1

Main boom 61,0 m (200 ft) Fixed jib on main boom
76,2 m (250 ft)

Manitowoc 11000-1 15
 Heavy-lift boom range diagram
No. 11000-1 main boom

82 0
(210) 64,0 80 0

70 0
(200) 61,0

(190) 57,9 61,0

(20 m
0') 60 0

(180) 54,9 57,9

(190 m
')
54,
(170) 51,8 9
(180 m
')
50 0
51,8
(170 m
(160) 48,8 ')
Height above ground m (ft)

48,
(1608 m
(150) 45,7 ')

45,
(1507 m
(140) 42,7 ')
40 0
42,
(1407 m
')
(130) 39,6 39,
6
(130 m
')
(120) 36,6 36,
6
(120 m
')

(110) 33,5 33,

5
(110 m
') 30 0
(100) 30,5 30,
(10 5 m
0')

(90) 27,4 27,4

(90 m
')

(80) 24,4 24,

4
(80 m
')

21,4
(70) 21,3 (70 m
') 20 0
18,
3
(60 m
(60) 18,3 ')

15,
3
(50 m
(50) 15,2 ')

12,2
(40 m
(40) 12,2 ')

(30) 9,1

4,38 m 1,10 m 12,2 18,3 24,4 30,5 36,6 42,7 48,8 54,9
(14' 5") (3' 7") (40) (60) (80) (100) (120) (140) (160) (180)
Tailswing 1,75 m
(5' 9")
Distance from centerline of rotation m (ft)
Rotation

16
 Heavy-lift boom load charts
Model 11000-1 liftcrane boom capacities – 11000-1 main boom
31,3 t (69,000 lb) upper counterweight + 14,4 t (31,750 lb) carbody counterweight
360° Rating kg (lb) x 1 000

Boom 12,2 15,2 18,3 21,3 24,4 27,4 30,5 33,5 36,6 39,6 42,7 45,7 48,8 51,8 54,9 57,9 61,0
m (ft) (40) (50) (60) (70) (80) (90) (100) (110) (120) (130) (140) (150) (160) (170) (180) (190) (200)
Radius
3,3 100,0*
(11) (220.0*)
3,5 98,3* 96,7* 90,9*
(12) (213.3*) (213.2*) (-)
4,0 90,3* 90,2* 90,1*
(14) (188.1*) (187.8*) (187.4*)
4,5 81,0* 80,9* 80,7* 68,4* -
(16) (165.5*) (165.3*) (164.8*) (151.0*) (151.0*)
5,5 66,8* 66,7* 66,4* 66,4* 66,3* 57,0* 56,9*
(18) (147.8*) (147.4*) (146.9*) (146.7*) (146.5*) (125.8*) (123.6*)
6,0 61,3* 61,1* 61,0* 61,0* 60,8* 56,5* 56,3* 45,7*
(20) (132.8) (132.4) (132.2) (132.2) (131.8) (124.0) (100.6) (100.8*)
7,0 49,3 49,1 49,0 49,2 49,1 48,4* 48,3* 44,7* 43,7* 38,6* 33,0*
(24) (101.3) (101.0) (100.8) (101.3) (101.0) (100.8) (80.2) (96.5*) (94.2*) (85.1*) (72.9*)
8,0 40,1 40,0 39,9 40,1 39,9 39,9 39,8 39,6* 39,4* 37,7* 32,5* 28,1* -
(28) (80.9) (80.7) (80.5) (80.8) (80.5) (80.5) (61.3) (80.2) (79.9) (78.2*) (70.8*) (61.3*) (50.2*)
10,0 29,4 29,4 29,2 29,4 29,2 29,2 29,1 29,1 29,0 28,9 28,5* 26,5* 22,4* 19,7* 17,4* 15,4* 13,7*
(34) (61.7) (62.0) (61.6) (62.0) (61.6) (61.6) (48.9) (61.3) (61.1) (60.9) (60.5) (57.2*) (49.2*) (43.2*) (38.2*) (33.8*) (30.3*)
12,0 21,6* 23,1 22,9 23,1 22,9 22,9 22,7 22,7 22,6 22,5 22,4 22,2* 21,3* 18,7* 16,5* 14,6* 13,0*
(40) (45.9*) (49.8) (49.3) (49.8) (49.3) (49.3) (43.4) (48.9) (48.7) (48.4) (48.2) (48.0) (46.6*) (41.2*) (36.4*) (32.2*) (28.7*)
14,0 18,8 18,7 18,9 18,7 18,7 18,5 18,5 18,4 18,3 18,2 18,1 18,1* 17,6* 15,6* 13,8* 12,3*
(44) (44.3) (43.8) (44.1) (43.8) (43.7) (32.3) (43.4) (43.0) (42.8) (42.6) (42.4) (42.1*) (40.0*) (35.1*) (31.1*) (27.7*)
16,0 15,9 16,0 15,8 15,7 15,6 15,6 15,4 15,3 15,2 15,1 15,2 15,1* 14,5* 13,0* 11,6*
(55) (32.9) (33.2) (32.7) (32.5) (21.4) (32.3) (32.0) (31.6) (31.4) (31.2) (31.4) (31.2) (30.8*) (28.1*) (24.9*)
22,0 10,5 10,4 10,2 10,2 10,1 9,9 9,8 9,7 9,8 9,7 9,5 9,5 8,7*
(75) (22.1) (21.8) (15.8) (21.4) (21.2) (20.9) (20.5) (20.3) (20.5) (20.3) (19.9) (19.9) (18.5*)
28,0 7,4 7,4 7,2 7,1 6,9 6,9 6,9 6,7 6,6 6,6 6,4
(95) (-) (15.6) (15.3) (15.0) (14.6) (14.4) (14.5) (14.3) (14.0) (13.9) (13.5)
32,0 6,2 6,0 5,8 5,7 5,6 5,7 5,6 5,4 5,3 5,2
(110) (-) (12.6) (12.1) (11.9) (11.7) (11.7) (11.5) (11.1) (11.0) (10.6)
36,0 5,0 4,8 4,7 4,7 4,5 4,4 4,4 4,2
(120) (10.8) (10.3) (10.3) (10.1) (9.8) (9.6) (9.4) (9.2)
38,0 4,6 4,4 4,3 4,3 4,1 4,1 4,0 3,8
(130) (-) (9.2) (8.9) (8.9) (8.7) (8.5) (8.2) (7.8)
40,0 4,1 3,9 3,9 3,8 3,7 3,6 3,4
(140) (-) (8.0) (7.9) (7.7) (7.4) (7.2) (6.5)
44,0 3,4 3,2 3,1 3,0 2,6*
(150) (7.1) (6.8) (6.5) (6.3) (5.2)
48,0 2,7 2,6 2,5
(160) (5.9) (5.6) (5.3)
52,0 2,3 2,1
(165) (5.1) (4.6)
*Rated loads based on factors other than machine stability such as structural competence.
Meets ASME B30.5 Requirements – Capacities do not exceet 75% of static tipping load.
NOTICE: This capacity chart is for reference only and must not be used for lifting purposes.

For complete chart, refer to www.cranelibrary.com.

Meets ASME B30.5 Requirements - Capacities do not exceed 75% of static tipping load.
NOTICE: This capacity chart is for reference only and must not be used for lifting purposes.
Manitowoc 11000-1 17
 Fixed jib range diagram
No. 11000-1 fixed jib on main boom

(260) 79,2 80 0
10 0
(250) 76,2 30 0
1
70 0
(6 8,3
(240) 73,2 0)
1
(5 5,2
0)
(230) 70,1
1 60 0
(4 2,2 73
0)
(24 .2
(220) 67,1 82 0 9
0)
(3 ,1
0)
70
(23 .1
(210) 64,0 0)

6
(22 7.1
0) 50 0
(200) 61,0
64
(210,0
)
(190) 57,9
61
Height above ground m (ft)

(20 ,0
0)
(180) 54,9 57
(19 ,9
0)

(170) 51,8 54
(18 ,9
0)

(160) 48,8 51
(170,8
)

(150) 45,7 48
(16 ,8
0)
40 0

45
(140) 42,7 (15 ,7
0)

42
(130) 39,6 (14 ,7
0)

39
(13 ,6
(120) 36,6 0)

36
(12 ,6
(110) 33,5 0)

33
(110,5 30 0
)
(100) 30,5

(90) 27,4

(80) 24,4

(70) 21,3

(60) 18,3

(50) 15,2

(40) 12,2

(30) 9,1

4,38 1,10 m 12,2 18,3 24,4 30,5 36,6 42,7 48,8 54,9
(14' 5") (3' 7") (40) (60) (80) (100) (120) (140) (160) (180)
Tailswing 1,75 m
(5' 9") Distance from centerline of rotation m (ft)
Rotation

18
 Fixed jib load charts
Model 11000-1 liftcrane jib capacities
No. 11000-1 fixed jib on main boom
28 800 kg (63,500 lb) upper counterweight, 7 300 kg (16,100 lb) carbody counterweight crawler extended
360° Rating kg (lb) x 1 000
10˚ offset 30˚ offset
Boom 24,4 30,5 39,6 48,8 57,9 Boom 24,4 30,5 39,6 48,8 57,9
m (ft) (80) (100) (130) (160) (190) m (ft) (80) (100) (130) (160) (190)

Radius Radius

10,0 10,8 10,0
(30) (24.0) (30)
12,0 10,8 10,8 10,8 12,0 9,5
(40) (24.0) (24.0) (24.0) (40) (21.0)

14,0 10,8 10,8 10,8 10,8 — 14,0 9,2 9,4 —

(50) (24.0) (24.0) (24.0) (24.0) (19.4) (50) (19.5) (20.6) (21.0)

18,0 10,8 10,8 10,8 10,7 8,4 18,0 8,0 8,5 9,2 9,5 8,2
(60) (24.0) (24.0) (24.0) (23.7) (18.6) (60) (17.5) (18.6) (20.1) (21.0) (18.2)
8,0 7,8 7,4 7,2 6,9 24,0 6,7 7,3 7,6 7,4 7,2
Jib 9,1 m (30 ft)
24,0
Jib 9,1 m (30 ft)

(80) (17.3) (16.8) (16.1) (15.5) (14.8) (80) (14.8) (15.9) (16.6) (16.0) (15.5)

30,0 5,9 5,7 5,3 5,0 4,7 30,0 6,0 5,4 5,2 4,9
(100) (12.8) (12.2) (11.5) (10.9) (10.2) (100) (—) (11.8) (11.2) (10.6)

36,0 4,5 3,9 3,7 3,3 36,0 3,8 3,5

(120) (—) (8.5) (7.9) (7.2) (120) (8.2) (7.5)

42,0 2,9 2,7 2,3 42,0 2,4

(140) (6.1) (5.8) (4.8) (140) (5.2)

44,0 2,7 2,4 2,0 44,0 2,1

(150) (—) (4.7) (3.9) (150) (4.2)

48,0 1,7 1,5 48,0
(160) (3.6) (—) (160)

52,0 1,4 52,0

(170) (—) (170)

Boom 24,4 30,5 39,6 48,8 57,9 Boom 24,4 30,5 39,6 48,8 57,9
m (ft) (80) (100) (130) (160) (190) m (ft) (80) (100) (130) (160) (190)
Radius Radius

10,0 10,8 10,8 10,0
(30) (—) (—) (30)
12,0 10,8 10,8 10,8 12,0 6,9 —
(40) (24.0) (24.0) (—) (40) (14.4) (15.1)
14,0 10,8 10,8 10,8 10,8 14,0 6,8 6,8 — —
(50) (24.0) (24.0) (24.0) (24.0) (50) (12.9) (13.6) (14.5) (15.1)
18,0 9,5 10,6 10,8 10,8 8,4 18,0 5,9 6,2 6,6 6,8 —
(60) (20.7) (23.2) (24.0) (24.0) (18.5) (60) (10.9) (11.6) (12.5) (13.2) (13.8)
Jib 12,2 m (40 ft)

Jib 12,2 m (40 ft)

24,0 7,2 7,9 7,5 7,3 7,0 24,0 5,0 5,3 5,7 6,0 6,3
(80) (15.6) (17.0) (16.3) (15.7) (15.1) (80) (—) (10.3) (11.1) (11.6) (11.0)

30,0 5,8 5,7 5,4 5,1 4,8 30,0 4,7 5,0 5,3 5,1
(100) (12.6) (12.4) (11.7) (11.1) (10.4) (100) (—) (8.9) (8.4) (7.8)

36,0 4,4 4,0 3,7 3,4 36,0 4,1 3,9 3,6
(120) (9.4) (8.7) (8.0) (7.3) (120) (—) (6.2) (5.5)

42,0 3,1 2,8 2,4 42,0 2,9 2,6
(140) (6.6) (5.9) (5.0) (140) (—) (4.4)

44,0 2,7 2,5 2,1 44,0 2,3
(150) (5.3) (5.0) (4.1) (150) (—)
48,0 1,9 1,5 48,0 1,8
(160) (4.0) (3.2) (160) (—)
52,0 1,4 52,0
(170) (3.1) (170)

For complete chart, refer to www.cranelibrary.com.

Meets ASME B30.5 Requirements - Capacities do not exceed 75% of static tipping load.
NOTICE: This capacity chart is for reference only and must not be used for lifting purposes.
Manitowoc 11000-1 19
 Fixed jib load charts
Model 11000-1 liftcrane jib capacities
No. 11000-1 fixed jib on main boom
28 800 kg (63,500 lb) upper counterweight, 7 300 kg (16,100 lb) carbody counterweight crawler extended
360° Rating kg (lb) x 1 000
10˚ offset 30˚ offset
Boom 24,4 30,5 39,6 48,8 57,9 Boom 24,4 30,5 39,6 48,8 57,9
m (ft) (80) (100) (130) (160) (190) m (ft) (80) (100) (130) (160) (190)
Radius Radius

10,0 10,0
(30) (30)
12,0 9,0 9,0 12,0
(40) (20.0) (20.0) (40)

14,0 9,0 9,0 9,0 14,0
(50) (20.0) (20.0) (20.0) (50)

18,0 7,8 8,6 9,0 9,0 8,1 18,0 4,8 5,0 5,2
(60) (17.0) (18.9) (20.0) (20.0) (18.4) (60) (10.4) (10.9) (11.4)

Jib 15,2 m (50 ft)

Jib 15,2 m (50 ft)

24,0 5,9 6,6 7,6 7,4 7,1 24,0 4,0 4,2 4,5 4,7 4,9
(80) (12.8) (14.4) (16.5) (15.9) (15.3) (80) (8.7) (9.2) (9.8) (10.3) (10.7)

30,0 4,7 5,3 5,5 5,2 4,9 30,0 3,4 3,7 3,9 4,2 4,4
(100) (10.3) (11.6) (11.8) (11.2) (10.5) (100) (7.6) (8.0) (8.7) (9.2) (9.6)

36,0 4,1 4,4 4,1 3,8 3,5 36,0 3,5 3,8 3,8
(120) (—) (9.5) (8.8) (8.2) (7.5) (120) (7.6) (8.3) (8.1)

42,0 3,5 3,1 2,8 2,4 42,0 3,0 2,7
(140) (—) (6.7) (6.1) (5.2) (140) (6.4) (5.7)

44,0 2,9 2,5 2,1 44,0 2,7 2,4
(150) (5.8) (5.2) (4.2) (150) (5.5) (4.7)

48,0 2,2 2,0 1,6 48,0 1,8
(160) (4.6) (4.3) (—) (160) (3.8)

52,0 1,5 52,0
(170) (3.4) (170)

Boom 24,4 30,5 39,6 48,8 57,9 Boom 24,4 30,5 39,6 48,8 57,9
m (ft) (80) (100) (130) (160) (190) m (ft) (80) (100) (130) (160) (190)
Radius Radius

10,0 10,0
(30) (30)
12,0 8,1 12,0
(40) (18.0) (40)

14,0 8,1 8,1 — 14,0
(50) (17.8) (18.0) (18.0) (50)

18,0 6,8 7,5 8,1 8,1 8,1 18,0 4,0
(60) (14.8) (16.3) (18.0) (18.0) (18.0) (60) (8.9)

Jib 18,3 m (60 ft)

Jib 18,3 m (60 ft)

24,0 5,1 5,6 6,4 7,2 7,2 24,0 3,3 3,5 3,7 3,9 3,9
(80) (11.1) (12.3) (14.1) (15.6) (15.4) (80) (7.3) (7.7) (8.1) (8.5) (8.7)

30,0 4,0 4,5 5,2 5,2 4,9 30,0 2,8 3,0 3,2 3,4 3,5
(100) (8.8) (9.9) (11.4) (11.3) (10.7) (100) (6.2) (6.6) (7.1) (7.5) (7.8)

36,0 3,4 3,8 4,1 3,8 3,5 36,0 2,7 2,9 3,1 3,2
(120) (7.3) (8.2) (8.9) (8.3) (7.5) (120) (5.9) (6.3) (6.7) (7.0)

42,0 3,2 3,1 2,9 2,4 42,0 2,6 2,8 2,7
(140) (7.1) (6.8) (6.1) (5.2) (140) (5.8) (6.2) (5.9)

44,0 3,1 2,9 2,6 2,1 44,0 2,7 2,4
(150) (—) (6.0) (5.3) (4.3) (150) (5.7) (4.9)

48,0 2,4 2,1 1,6 48,0 2,3 1,9
(160) (5.0) (4.4) (3.4) (160) (4.9) (4.0)

52,0 — 1,6 52,0 1,4
(170) (4.0) (3.6) (170) (3.2)

For complete chart, refer to www.cranelibrary.com.

Meets ASME B30.5 Requirements - Capacities do not exceed 75% of static tipping load.
NOTICE: This capacity chart is for reference only and must not be used for lifting purposes.
20
 Clamshell
Boom:
Welded lattice construction using tubular, high-tensile steel
chords with pin connections between sections.
Basic boom length: 12.2 m (40 ft)
Max. boom length: 30.5 m (100 ft)
Limit one clamshell bucket weight: 2 100 kg (4,600 lb)
Maximum component chart
Boom length m (ft) Boom arrangement
12.2 (40) Base-Tip
15.2 (50) Base-A-Tip
18.3 (60) Base-A-A-Tip, Base-B-Tip
21.3 (70) Base-A-B-Tip
24.4 (80) Base-A-A-B-Tip, Base-B-B-Tip
27.4 (90) Base-A-C-Tip
30.5 (100) Base-A-A-C-Tip

Base = 6.10 m (20 ft)

Insert: A = 3.05 m (10 ft) GUIDE SHEAVE
B = 6.10 m (20 ft)
C = 12.2 m (40 ft)
Tip = 6.10 m (20 ft)

1. Figures represent maximum allowable capacity, and assume level ground and ideal working conditions.
2. Capacities are calculated at 66% of the minimum tipping loads.
3. Capacities are maximum recommended by PCSA Standard #4. Allowances must be made by the user for
such unfavorable conditions as a soft or uneven supporting surface, rapid cycle operations, or bucket suction.
4. The combined weight of the bucket and load must not exceed these capacities.
5. Boom length for clamshell operation should not exceed 30.5 m (100 ft).

Clamshell Capacities
19,8 t (13.3 USt) counterweight
(three upper counterweights, crawlers extended)
kg (lb) x 1 000
Boom 12,2 15,2 18,3 21,3 24,4 27,4 30,5
m (ft) (40) (50) (60) (70) (80) (90) (100)

Radius

6,7 9,9*
(22) (22.0)

7,9 9,9* 9,9*
(26) (22.0) (22.0)

9,1 9,9* 9,9* 9,9*
(30) (22.0) (22.0) (22.0)

10,4 9,8* 9,8* 9,8* 9,7*
(34) (21.4) (21.4) (21.4) (21.4)

12,8 8,3* 8,3* 8,3* 8,3* 7,8*

(42) (17.3) (17.3) (17.3) (17.3) (17.3)

15,2 6,2* 6,2* 6,2* 6,2* 6,2*

(50) (14.6) (14.6) (14.6) (14.6) (14.6)

17,7 5,6* 5,5* 5,5* 5,7* 5,5*
(58) (12.5) (12.5) (12.5) (12.5) (12.5)

20,1 5,0* 5,0* 5,0* 5,0*
(66) (11.0) (11.0) (11.0) (11.0)

22,6 4,3* 4,3* 4,2*

(74) (9.8) (9.7) (9.4)

25,0 3,5* 3,7*

(82) (8.3) (8.1)

26,8 3,3*
(88) (7.2)

28,7 2,9*
(94) (6.6)
Ratings shown by * are determined by the strength of the boom or other
structural components.
Manitowoc 11000-1 21
 Manitowoc Crane Care
Crane Care is Manitowoc’s comprehensive service and For a worldwide listing of dealer locations, please
support program. It includes classroom and on-site consult our website at: www.manitowoc.com
training, prompt parts availability, expert field service,
technical support and documentation. Technical documentation

That’s commitment you won’t find anywhere else. Manitowoc has the industry’s most extensive
documentation; available in major languages and
That’s Crane Care. formats that include print, videotape, and DVD/CD.

Service training Additional copies available through your Authorized

Manitowoc Distributor.
Manitowoc specialists work with you in our training
centers and in the field to make sure you know how • Crane operator’s manual
to get maximum performance, reliability and life from • Crane parts manual
your cranes. • Crane capacity manual
• Crane vendor manual
Manitowoc Cranes Technical Training Centers provide • Crane service manual
valuable multi-level training, which is available for all • Luffing jib operator’s/parts manual
models and attachments, in the following format: • Capacity chart manual - attachments

• Intro to Canbus and Canbus 1, 2, 3 Available from your Authorized Manitowoc Cranes
• Intro to EPIC and EPIC 1, 2, 3 Distributor, these videos are available in NTSC, PAL,
• Small Crawler 1 SECAM, and DVD formats.
•C anbus 1 and 2 assembly, operation and
maintenance • Your Capacity Chart Video
•E PIC 1 and 2 assembly, operation and • Respect the Limits Video
maintenance • Crane Safety Video
• Boom Inspection/Repair Video
Refer to www.manitowoc.com for course descriptions.
Crane Care Package
Parts availability Manitowoc has assembled all of the available literature,
CD’s and videos listed above plus several Manitowoc
Genuine Manitowoc replacement parts are accessible premiums into one complete Crane Care Package,
through your distributor 24 hours a day, 7 days a week, which is supplied to the owner of each new crane.
365 days a year.

Service interval kits

200 hour kit
1,000 hour kit
2,000 hour kit
Hydraulic test kit
U.S. standard tools kit

Field service

Factory-trained service experts are always ready to help

maintain your crane’s peak performance.

For a worldwide listing of dealer locations, please

consult our website at: www.manitowoc.com

Technical support

Manitowoc’s dealer network and factory personnel

are available 24 hours a day, 7 days a week, 365 days
a year to answer your technical questions and more,
with the help of computerized programs that simplify
crane selection, lift planning, and ground-bearing
calculations.

22
 Notes

Manitowoc 11000-1 23
Manitowoc Cranes

Regional headquarters
Americas Europe, Middle East, Africa China Greater Asia-Pacific
Manitowoc, Wisconsin, USA Ecully, France Shanghai, China Singapore
Tel: +1 920 684 6621 Tel: +33 (0)4 72 18 20 20 Tel: +86 21 6457 0066 Tel: +65 6264 1188
Fax: +1 920 683 6277 Fax: +33 (0)4 72 18 20 00 Fax: +86 21 6457 4955 Fax: +65 6862 4040
Shady Grove, Pennsylvania, USA
Tel: +1 717 597 8121
Fax: +1 717 597 4062

Regional offices
Americas
Brazil
China
Beijing
Factories This document is non-contractual. Constant improvement and engineering progress
make it necessary that we reserve the right to make specification, equipment, and price
Brazil changes without notice. Illustrations shown may include optional equipment and
Alphaville Chengdu accessories and may not include all standard equipment.
Passo Fundo
Mexico Guangzhou
China
Monterrey Xian
TaiAn
Chile
Zhangjiagang
Santiago Greater Asia-Pacific
France
Australia
Charlieu
Europe, Middle East, Brisbane
Moulins
Africa Melbourne
Germany
France Sydney
Wilhelmshaven
Baudemont India
India
Cergy Chennai
Pune
Decines Delhi
Italy
Germany Hyderabad
Niella Tanaro
Langenfeld Pune
Portugal
Italy Korea
Baltar
Lainate Seoul
Fânzeres
Netherlands Philippines
Slovakia
Breda Makati City
Saris
Poland Singapore
USA
Warsaw
Manitowoc
Portugal
Port Washington
Baltar
Shady Grove
Russia
Moscow
South Africa
Johannesburg
U.A.E.
Dubai
U.K.
Buckingham

©2013 Manitowoc
0613-11000-1 PG-US-E www.manitowoccranes.com