TTS-800
These rotors have Total-Top-Serviceability, powerful G-800 Series gear drives, and the largest flange compartment in the industry
to accommodate all two-way module components.
KEY BENEFITS
• Full-circle
• Dual-trajectory, colour-coded nozzles:
- 10 standard trajectory (22.5°)
- 9 low-angle trajectory (15°)
• Nozzle range: #15 to #53
• Exclusive PressurePort™ nozzle technology
• Stainless steel riser
• Water-lubricated gear drive
• Optional high-rotation-speed stator
• All TTS-800 VIH advanced features on page 204 TTS-800
Pop-up height: 9.5 cm
• All TTS-800 DIH advanced features on page 206
Overall height: 30 cm
Flange diameter: 18 cm
OPERATING SPECIFICATIONS Female inlet: 1½" (40 mm) Acme
• Radius: 14.9 to 29.6 m
• Flow: 3.23 to 13.29 m3/hr; 53.8 to 221.4 l/min
• Pressure range: 3.4 to 6.9 bar; 340 to 690 kPa
• All TTS rotors are pressure-rated at 10 bar; 1,000 kPa
OPTIONS
• C – Check-O-Matic checks up to 8 m in elevation change and readily
converts to normally open hydraulic with through-the-top connections
• D – Decoder valve-in-head with all “E” specifications below*
• DD – Two-station decoder valve-in-head with all “E” specifications below*
• E – Electric valve-in-head with adjustable pressure regulation, on-off-auto
selector, 210 mA (370 mA inrush) 50 Hz; 190 mA (350 mA inrush) 60 Hz
solenoid with captive plunger and internal downstream bleed
* All DIH rotors include two 3M DBRY-6 splices for connection to the two-wire
path. See page 196 for critical recommendations on grounding DIH rotors.
GOLF ROTORS
TTS-880 – SPECIFICATION BUILDER: ORDER 1 + 2 + 3 + 4 + 5
1 Model 2 Valve Options 3 Nozzle 4 Regulation* 5 Options
GT-880 = Full-circle 15 to 53 = Installed G-880 nozzle* P5 = 50 PSI; 3.4 bar; 340 kPa S = SSU*
C = Check-O-Matic*
(nozzles 15 to 18)
D = Decoder valve-in-head P6 = 65 PSI; 4.5 bar; 450 kPa
(nozzles 18 to 25)
DD = Two-station decoder valve-in-head P8 = 80 PSI; 5.5 bar; 550 kPa
(nozzles 25 to 53)
E = Electric valve-in-head
*Converts to N.O. hydraulic valve-in-head *SSU = #18, #23, #25, or #48 *SSU = P5/#18, P6/#23, *Standard
P8/#25, P8/#48 stocking unit
Example:
GT-880-E-48-P8-S = GT-880 full-circle electric valve-in-head, installed #48 nozzle, 80 PSI; 5.5 bar; 550 kPa regulation, standard stocking unit model
208 Visit hunterindustries.com
TTS-880 NOZZLE PERFORMANCE DATA* TTS-880 STANDARD NOZZLES TTS-880 LOW-ANGLE NOZZLES**
Nozzle Set Pressure Radius Flow Precip mm/hr
bar kPa m m3/hr l/min
3.4 344 14.9 3.23 53.8 14.5 16.7
Tan Grey 4.1 413 15.5 3.57 59.4 14.8 17.0
4.5 450 15.9 3.73 62.1 14.8 17.1
15 4.8 482 16.2 3.86 64.4 14.8 17.1 ** Low-angle nozzles reduce the radius by 15%.
803611 White 315317 5.5 551 16.8 4.13 68.9 14.7 17.0
3.4 344 17.1 3.91 65.1 13.4 15.5
Tan Grey 4.1 413 17.7 4.28 71.3 13.7 15.8
4.5 450 18.0 4.48 74.6 13.8 16.0
18 4.8 482 18.3 4.54 75.7 13.6 15.7
803611 Orange 315317 5.5 551 18.6 4.82 80.3 13.9 16.1
3.4 344 17.4 4.18 69.7 13.8 16.0
Tan Grey 4.1 413 18.0 4.61 76.8 14.3 16.5
4.5 450 18.6 4.86 81.0 14.1 16.2
20 4.8 482 19.2 4.91 81.8 13.3 15.4
803611 Brown 315317 5.5 551 19.5 5.16 85.9 13.5 15.6
3.4 344 19.2 4.91 81.8 13.3 15.4
Tan Lt. Blue 4.1 413 19.8 5.22 87.1 13.3 15.4
4.5 450 20.1 5.45 90.8 13.5 15.6
23 4.8 482 20.4 5.66 94.3 13.6 15.7
803611 Green 315311 5.5 551 20.7 6.04 100.7 14.1 16.2
4.5 450 21.6 6.50 108.3 13.9 16.0
Tan Lt. Blue 4.8 482 22.3 6.75 112.5 13.6 15.7
5.5 551 22.6 7.19 119.8 14.1 16.3
25 6.2 620 22.9 7.65 127.5 14.6 16.9
803611 Blue 315311 6.9 689 23.5 8.12 135.3 14.7 17.0
Easy-Access Servicing
4.5 450 22.6 7.02 117.0 13.8 15.9
Tan Lt. Blue 4.8 482 22.9 7.27 121.1 13.9 16.1 An extra-thick compartment lid is retained with
a 1/4-turn, stainless steel, single-point fastener.
5.5 551 23.5 7.77 129.5 14.1 16.3
33 6.2 620 24.1 8.22 137.0 14.2 16.4
803611 Grey 315311 6.9 689 24.7 8.68 144.6 14.2 16.4
4.5 450 23.5 7.97 132.9 14.5 16.7
Tan Lt. Blue 4.8 482 24.1 8.31 138.5 14.3 16.6
5.5 551 25.0 8.84 147.3 14.1 16.3
38 6.2 620 25.6 9.38 156.3 14.3 16.5
803611 Red 315311 6.9 689 26.5 9.90 165.0 14.1 16.3
- - - - - - -
Tan Blue 4.8 482 25.3 9.38 156.3 14.7 16.9
GOLF ROTORS
5.5 551 25.9 9.90 165.0 14.8 17.0
43 6.2 620 26.5 10.52 175.3 15.0 17.3
803611 Dk. Brown 315300 6.9 689 27.1 11.09 184.7 15.1 17.4
- - - - - - -
Dk. Brown Dk. Blue 4.8 482 27.4 10.65 177.5 14.2 16.3
5.5 551 28.0 11.11 185.1 14.1 16.3
48 6.2 620 28.7 11.46 191.0 14.0 16.1
803610 Dk. Green 833500 6.9 689 29.3 12.15 202.5 14.2 16.4
- - - - - - -
Dk. Brown Dk. Blue 4.8 482 27.7 11.31 188.5 14.7 17.0
5.5 551 28.3 11.86 197.7 14.8 17.0
53 6.2 620 29.0 12.61 210.1 15.0 17.4
803610 Dk. Blue 833500 6.9 689 29.6 13.29 221.4 15.2 17.6
Spacious Flange Compartment
* Preliminary performance data. Complies to ASAE standard. All The largest and deepest compartment in the industry
precipitation rates calculated for 360° operation. All triangular rates are offers plenty of room for full-sized DBRY-6 splice
equilateral. To calculate precipitation rates for 180° operation, multiply by 2. connectors.
Visit hunterindustries.com GOLF IRRIGATION | Built on Innovation® 209
