Scribd
Upload
64 views3 pages

Beamtool Scan Plan: Inspection Layout

This document contains a scan plan for inspecting a steel beam with the following dimensions: thickness of 28.58mm, outer diameter of 273mm, inner diameter of 215.84mm, and width of 200mm. It specifies the material properties and weld details. The scan plan outlines the phased array probe setup using two beamsets - a sectorial beamset with 32 elements between 30-35 degrees, and a linear beamset with 16 elements from 1-64 degrees.

Uploaded by

Anonymous c3eiDyW
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
64 views3 pages

Beamtool Scan Plan: Inspection Layout

This document contains a scan plan for inspecting a steel beam with the following dimensions: thickness of 28.58mm, outer diameter of 273mm, inner diameter of 215.84mm, and width of 200mm. It specifies the material properties and weld details. The scan plan outlines the phased array probe setup using two beamsets - a sectorial beamset with 32 elements between 30-35 degrees, and a linear beamset with 16 elements from 1-64 degrees.

Uploaded by

Anonymous c3eiDyW
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

7/22/2020 report 5.

htm

BeamTool Scan Plan

Inspection Layout

Piece
Shear Compression
Thickness OD ID Width Index Offset Material
Velocity Velocity
28.58mm 273mm 215.84mm 200mm 0mm Steel 1020 3.24mm/µs 5.89mm/µs

HAZ: 15.29% HAZ Width: 5mm

Weld

file:///C:/Users/windows/Desktop/exxon mobil/report 5.htm 1/3


7/22/2020 report 5.htm

Region Angle Height Gap


Upper Fill 30° 2.58mm
Hot Pass - V-Type 30° 24mm
Root 2mm 2mm

Cap Height Width Overlap


Top 2mm 42.69mm 5mm
Bottom 2mm 12mm 5mm

Phased Array Probe: PA Probe


Index Offset: -40mm Scan Offset: 0mm Mirrored: False

Wedge:
Velocity Primary Offset Height 1st Element Length Width Angle

2.4mm/µs 58.6mm 11mm 68.6mm 20mm 36o

Transducer:

Num. of Elements Element Pitch Aperture

64 0.6mm 38.4mm

Sectorial Beamset 1 Beamset


Law Config.: Sectorial Wave Type: Shear
Element First Min Max Angle
Focus
Qty Element Angle Angle Steps
32 30 35o 70o 1.21o None

file:///C:/Users/windows/Desktop/exxon mobil/report 5.htm 2/3


7/22/2020 report 5.htm

Linear Beamset 1 Beamset


Law Config.: Linear Wave Type: Shear
Element First Last Number Refracted
Focus
Qty Element Element of Beams Angle
16 1 64 49 48o None

Document Date: Wednesday, July 22, 2020

file:///C:/Users/windows/Desktop/exxon mobil/report 5.htm 3/3

You might also like