WHAT’S NEW

ELECTRICAL TERMINAL REPAIR PACK AVIATION GRADE ELECTRICAL TERMINALS

AWG AWG AWG

18-22 14-16 10-12

Aircraft grade electrical terminals meet Military and Aerospace MS-

25036 Class 1, and SAE AS7928, Type II, Class 1 and 2 standards.
They feature a brass sleeve for additional strength to protect against
stress and vibration damage. The nylon insulation sleeve is rated to
A generous assortment of aviation grade ring and butt terminals.
300V and temperatures up to 105 °C.
Perfect for field repairs. Meets MS-25036, and SAE AS7928 standards.
• 10 Butt splices 18-22 AWG • 24 Ring terminals #6, #8, PART NUMBER AWG POST SIZE PRICE
• 8 Butt splices 14-16 AWG #10, 1/4 14-16 (Blue) AWG RING TERMINALS (25EA PER PACK)
• 6 Butt splices 10-12 AWG • 16 Ring terminals #8, #10,
AVT1822R-4PK 18-22 #4 $7.95
• 32 Ring terminals #4, #6, #8, 1/4, 5/1610-15 (Yellow) AWG
#1018-22 (Red) AWG AVT1822R-6PK 18-22 #6 $6.95
AVT-RK.................................................................................$49.95 AVT1822R-8PK 18-22 #8 $7.95
AVT1822R-10PK 18-22 #10 $7.95
ATS SAFETY WIRE KIT AVT1822R-1/4PK 18-22 1/4 $7.95
AVT1416R-4PK 14-16 #4 $6.95
AVT1416R-6PK 14-16 #6 $6.95
A money-saving kit from ATS. AVT1416R-8PK 14-16 #8 $6.95
Included is our ATS 6” Safety AVT1416R-10PK 14-16 #10 $6.95
Wire Twisters, the Hand Safety
Wire Twister (134-8” long) for AVT1416R-1/4PK 14-16 1/4 $6.95
getting into those tight areas, AVT1416R-5/16PK 14-16 5/16 $8.95
quantity 3 1lb. cans of Safety
AVT1416R-3/8PK 14-16 3/8 $8.95
Wire 302-25, 302-32, 302-41,
and an 11” Canvas Tool Bag. AVT1012R-6PK 10-12 #6 $10.95
AVT1012R-8PK 10-12 #8 $10.95
AVT1012R-10PK 10-12 #10 $10.95
AVT1012R-1/4PK 10-12 1/4 $11.95
SWK-7R................... (6” Reversible Twister 6WR)...................$85.95
AVT1012R-5/16PK 10-12 5/16 $11.95
SWK-7..................(6” Non-Reversible Twister 6WA)...............$65.95
AVT1012R-3/8PK 10-12 3/8 $12.95

AVERY RV-14 ELEVATOR BUCKING BAR BUTT SPLICES (10EA PER PACK)
AVT1822BSK 18-22 AWG $8.95
AVT1416BSK 14-16 AWG $6.95
AVT1012BSK 10-12 AWG $11.95

ROTAX ENGINE THREAD CHASER

ATS 12MM spark plug thread
cleaning chasers are exact-
This special designed bucking bar is required on the Van’s Aircraft ly what you need to clean
RV-10 and RV-14 for riveting inside the elevators.   The bar dimen- both the spark plug and port
sions are called out in the RV builders plans pages 9-12 of the con- threads of your Rotax Engine.
trol surface section.   The bar measures 1” wide X 3/4” tall X 14” long.   It features a threaded end
Both ends of the bar have machined angles per the plans – one that is specially designed
end has a “V” double angle, and the other end has a single angle.   to clean the threads of your
Both ends are used for separate riveting tasks in the airplane kit. spark plug holes.
AE630.................................................................................. $39.95 ATS487E...............................................................................$29.95

800-248-0638 AIRCRAFT TOOL SUPPLY www.aircraft-tool.com 1

 WHAT’S NEW
AVERY CUB CRAFTERS DRILL JIG KIT AVERY HAND SQUEEZER

This drill jig is highly recommended for safely and accurately drill-
ing the rib attach holes in the Cub Crafter wing spars by the build-
er.   The drill jig is precision machined aluminum with all dimensions In 1993 Avery Tools pioneered and developed the unique design of
per the print supplied with the builders manual.    The drill jig has (2) the first hand rivet squeezer that had inter-changeability between
hardened steel drill bushings – one # 40 drill bushing & (1) # 30 drill the yokes for pneumatic squeezers. The squeezer comes with two
bushing. The drill jig has a blue anodized finish, and includes (2) # 40 quick release pins for faster and easier yoke changes, and handles
& (2) # 30 cobalt drill bits + a stick of Boelube dry drilling lubricant. that are 2” longer allowing for more leverage. This squeezer has
molded grips to help prevent slippage and hand fatigue allowing
AE1145................................................................................$95.95 you to squeeze between 3/32” to 1/8”.
AE9430................................. (3” Yoke)............................... $315.95
AVERY 12” BACK RIVET SET AE9415................................(1.5” Yoke).............................. $289.95
AE9400............................ (Handles Only).......................... $179.95

AVERY RV-14 MODIFIED #40 COUNTERSINK

On page 9-99 of the RV14 plans,
between #6 & #7 there is a NOTE
AE4653 to taper the pilot of a #40 counter-
AE4560
sink cutter per figure 4 to aid in the
countersinking of the holes in the
angled trailing edge wedge. We
now offer a #40 countersink cutter
These extended versions of Back Rivet Sets are great to get into con- with the pilot precision ground to an
fined areas, They are especially useful to RV-10 builders who must angle per the plans.
back rivet some areas of the fuselage. 12” long straight, .401 shank AE14-1051M........................................................................$15.95
AE4560................................. (Straight).................................$35.95
AE4653............................ (Double Offset)............................$45.95 LEM HAND RIVENUT TOOL

Unit is simple to use

GROMMET STRETCHER and an efficient means
for installing rivenuts.
Unit comes with allen
wrench.

PART NUMBER SIZE PRICE

L845-1/4-20 1/4-20 $45.95
L845-1/4-28 1/4-28 $45.95
Stop cutting your grommets to get them over fittings and plugs, use L845-10/24 10-24 $45.95
Bogert Aviation’s Grommet Stretcher. Using the Grommet Stretcher is
L845-10/32 10-32 $45.95
2-3x’s faster when stretching grommets over fittings and plugs. It also
improves safety because grommets are continuous. Great for spark L845-4/40 4-40 $45.95
wires or Molex plugs. Effective for use in many aviation, automotive, L845-6/32 6-32 $45.95
industrial, and marine applications.
L845-8/32 8-32 $45.95
BO-05M-GS......................................................................... $37.95

2 800-248-0638 AIRCRAFT TOOL SUPPLY www.aircraft-tool.com

 KITS
AVIONICS MAINTENANCE KIT

QTY PART DESCRIPTION QTY PART DESCRIPTION

1 19000 19” TOOL BOX 1 B22 INSPECTION MIRROR
1 10-935 1/4” SPEED HANDLE 1 C79H 9” CRESCENT WRENCH
1 10937 ALLEN WRENCH SET 13PC 1 CE-0275 5PC PIN EXTRACTOR SET
1 18431 8” NEEDLE NOSE PLIERS 1 E200-003 AUTOMATIC WIRE STRIPPER
1 45239 DUAL WALL HEAT SHRINK TUBING 1 E200-058 4.5” DIAGONAL CUTTER
1 5X634 DIAGONAL CUTTERS 1 E300-015 D-SUB CLOSED BARREL CRIMPER
1 53167 6PC SCREW DRIVER SET 1 E300-039 OPEN BARREL AWG 10-20 CRIMPER DIE
1 6LN VISE-GRIP PLIERS 1 E300-038 COAX TERMINALS CRIMPER DIE
1 6WR 6” REVERSIBLE SAFETY WIRE PLIERS 1 E500-037 TERMINAL CRIMP KIT
1 700 5PC MINI SCREWDRIVER SET 1 E900-065 INSERTION/EXTRACTION TOOL
1 7210 TAPE MEASURE 1 E900-181 6” STRAIGHT FORCEPS
1 7459 SOLDERING PASTE 1 E900-222 6” CURVED FORCEPS
1 7971 PRO BUTANE SOLDERING IRON 1 MT-1280 20 AMP MULTIMETER
1 80313 26PC 12PT SOCKET KIT 1 VT001-5 MINI VAMPLIERS
1 93813 1/4”X3/8” APEX BIT HOLDER 1 15530 BALL PEEN HAMMER
1 AT508K CANNON PLUG PLIERS 1 48445 7PC NUT DRIVER KIT
1 2078606 6” ADJUSTABLE WRENCH 1 2089100 UTILITY FOLDING KNIFE
1 2078608 8” ADJUSTABLE WRENCH
Our new Avionics Maintenance Kit has all of the essential tools to work on every aspect of aircraft electronics systems. Wether it’s a simple
electrical repair or a complete system rewire, you’ll find this kit indispensable in getting the job done quickly and professionally.
AVK-01............................................................................................................................................................................................ $849.95

800-248-0638 AIRCRAFT TOOL SUPPLY www.aircraft-tool.com 3

 KITS
ENGINE SPECIALIST KIT

QTY PART DESCRIPTION QTY PART DESCRIPTION

1 SPCT100A SPARK PLUG CLEANER TESTER 1 2EM DIFFERENTIAL PRESSURE TESTER W/ MASTER ORIFICE
1 12 SPARK PLUG CLEANER 1 2E-WARRANTY 5 YEAR CALIBRATION CERTIFICATE
1 20200 SPARK PLUG HOLE THREAD CHASER 1 18MM-XT COMPRESSION TESTER EXTENSION
1 ATS2612 ATS SPARK PLUG THREAD LUBRICANT 1 AE81031 AVERY OIL FILTER CUTTER
1 ATS415K SPARK PLUG GAPPER AND GAP GAUGE 1 AA472 OIL FILTER TORQUE WRENCH
1 ATS950 ATS MAGNETIC SPARK PLUG SOCKET 1 E25 EASTERN TIMING INDICATOR
1 DV980-10 SPARK PLUG MAGNIFIER 1 LED52 DUAL TONE MAGNETO SYNCHRONIZER
1 FAP-12 SPARK PLUG TRAY 1 E5 EASTERN CABLE TESTER
1 M674HD 100 PC CHAMPION SPARK PLUG GASKETS 2 ML20 BENDIX MAGNETO LOCK TOOL
1 PA01 SPARK PLUG VIBRATOR CLEANER 2 T118 SLICK MAGNETO LOCK TOOL
1 ATS485 TERMINAL LEAD THREAD CHASER 3/4” 1 8768 P-LEAD ADAPTERS COMPLETE SET
1 ATS486 TERMINAL LEAD THREAD CHASER 5/8” 1 7500 PISTON RING COMPRESSOR SET
1 ATS483 SPARK PLUG GAP EXPANSION TOOL 1 1723 PISTON RING INSTALLER
1 ATS420 SPARK PLUG GAPPER 1 3882-5 CYLINDER BASE WRENCH SET
1 ATS482 SPARK PLUG EROSION GAUGE 1 6494-SET LYCOMING INTERNAL HEX WRENCH SET
1 6061B SAFETY WIRE DRILL GUIDE 1 302-32 SAFETY WIRE
1 SPCT100-COVER SPARK PLUG CLEANER TESTER COVER 1 6WR REVERSIBLE 6” SAFETY WIRE PLIERS
1 TC320 ENGINE CAP PROTECTORS 1 CB21-17 17” CANVAS BAG
ESK-01......................................................................................................................................................................................... $1,799.95

4 800-248-0638 AIRCRAFT TOOL SUPPLY www.aircraft-tool.com

 KITS
JOURNEYMAN BUILDER’S KIT

QTY PART DESCRIPTION QTY PART DESCRIPTION QTY PART DESCRIPTION

1 ATS-XX ATS PRO RIVET GUN 1 133 ADJUSTABLE MICROSTOP 1 ATS6100 ATS PALM DRILL
1 KMC-1022 HOMARK 22” TOOL BOX 1 1000-100-40 PILOT CUTTER (3/32) 1 DS-40 DRILL STOP (3/32)
1 1824 AIR REGULATOR 1 1000-100-30 PILOT CUTTER (1/8) 1 DS-30 DRILL STOP (1/8)
1 470-3-3/32 RIVET SET (AN470, 3/32”) 1 1000-100-21 PILOT CUTTER (5/32) 1 DS-21 DRILL STOP (5/32”)
1 470-3-1/8 RIVET SET (AN470, 1/8”) 1 1000-100-12 PILOT CUTTER (3/16) 1 DS-12 DRILL STOP (3/16)
1 470-3-5/32 RIVET SET (AN470, 5/32”) 1 4703-2 SQUEEZER SET (3/32”) 1 61 STRAP DUPLICATOR (3/32)
1 470-3-3/16 RIVET SET (AN470, 3/16”) 1 4704-2 SQUEEZER SET (1/8”) 1 62 STRAP DUPLICATOR (1/8)
1 0470-3-3/32 OFFSET RIVET SET (3/32”) 1 4705-2 SQUEEZER SET (5/32”) 1 63 STRAP DUPLICATOR (5/32”)
1 0470-3-1/8 OFFSET RIVET SET (1/8”) 1 4706-2 SQUEEZER SET (3/16”) 1 65 STRAP DUPLICATOR (3/16)
1 0470-3-5/32 OFFSET RIVET SET (5/32”) 1 4710-2 SQUEEZER SET (FLUSH 1/2”) 1 ATB8362 STANDARD AIRCRAFT BOOK
1 0470-3-3/16 OFFSET RIVET SET (3/16”) 1 3710-2 SQUEEZER SET (FLUSH 3/8”) 1 A601 ANGLE DRILL ATTACHMENT
1 750 FLUSH RIVET SET 1 3456-B DIMPLE DIE ORGANIZER 1 A604 CLOSE QUARTER CHUCK
1 12A RUBBERGUARD SET (1”) 1 HS144 HAND SEAMER 1 64823 HAND NIBBLER
1 142 BUCKING BAR 1 FP10 FLUTING PLIERS 1 ATSMV01 PRO MINI VACUUM
1 147 BUCKING BAR 1 SP2005K CHIP CHASERS (2.5” & 6”) 1 M1R AVIATION SNIP LEFT
1 148 BUCKING BAR 1 012-C60N NUMBER COBALT DRILLBIT SET 1 M2R AVIATION SNIP RIGHT
1 149 BUCKING BAR 1 5000-40 THREADED DRILL BIT (40) 1 M3R AVIATION SNIP STRAIGHT
25 CL-3/32 CLECOS (3/32”) 1 5000-30 THREADED DRILL BIT (30) 5 KWN-3/32 WINGNUT FASTENER (3/32”)
25 CL-1/8 CLECOS (1/8”) 1 5000-21 THREADED DRILL BIT (21) 5 KWN-1/8 WINGNUT FASTENER (1/8”)
25 CL-5/32 CLECOS (5/32”) 1 5000-12 THREADED DRILL BIT (12) 5 KWN-5/32 WINGNUT FASTENER (5/32”)
25 CL-3/16 CLECOS (3/16”) 1 ATSRS-1 1” RIVET SQUEEZER 5 KWN-3/16 WINGNUT FASTENER (3/16”)
4 26EL SIDE GRIP FASTENER 1” 1 ATSRS-3Y 3” RIVET SQUEEZER YOKE 1 130HD RIVET CUTTER
4 24EL SIDE GRIP FASTENER 1/2” 1 131 CLECO PLIERS

Our Journeyman kit is for the aspiring A&P Mechanic, or Homebuilder, who needs a comprehensive professional kit, but is not
yet ready for a Master Kit. It contains a broad selection of tools used frequently by Airframe Mechanics at an affordable price.
JBK-2602A...............................................................(With 2602A Economy 3X Rivet Gun)........................................................... $1,085.95
JBK-2X............................................................................ (With ATS Pro 2X Rivet Gun)................................................................... $1,089.95
JBK-3X............................................................................ (With ATS Pro 3X Rivet Gun)................................................................... $1,095.95
JBK-4X............................................................................ (With ATS Pro 4X Rivet Gun)................................................................... $1,099.95

800-248-0638 AIRCRAFT TOOL SUPPLY www.aircraft-tool.com 5

 KITS
AIRFRAME MECHANICS KIT

QTY PART DESCRIPTION QTY PART DESCRIPTION QTY PART DESCRIPTION

1 ATS-XX ATS PRO RIVET GUN 1 133 ADJUSTABLE MICROSTOP 1 ATS6101 3/8” AIR DRILL
1 1824 AIR REGULATOR 1 1000-100-40 PILOT CUTTER (3/32) 1 DS-40 DRILL STOP (3/32)
1 470-3-3/32 RIVET SET (AN470, 3/32”) 1 1000-100-30 PILOT CUTTER (1/8) 1 DS-30 DRILL STOP (1/8)
1 470-3-1/8 RIVET SET (AN470, 1/8”) 1 1000-100-21 PILOT CUTTER (5/32) 1 DS-21 DRILL STOP (5/32”)
1 470-3-5/32 RIVET SET (AN470, 5/32”) 1 1000-100-12 PILOT CUTTER (3/16) 1 DS-12 DRILL STOP (3/16)
1 470-3-3/16 RIVET SET (AN470, 3/16”) 1 302-32 SAFETY WIRE (.032) 1 61 STRAP DUPLICATOR (3/32)
1 470-3-1/4 RIVET SET (AN470, 1/4”) 1 FP21 FLUTING PLIERS 1 62 STRAP DUPLICATOR (1/8)
1 0470-3-3/32 OFFSET RIVET SET (3/32”) 1 64823 HAND NIBBLER 1 63 STRAP DUPLICATOR (5/32”)
1 0470-3-1/8 OFFSET RIVET SET (1/8”) 1 SP2005 CHIP CHASER (6”) 1 65 STRAP DUPLICATOR (3/16)
1 0470-3-5/32 OFFSET RIVET SET (5/32”) 1 SP2005S CHIP CHASER (2.5”) 1 ATB8362 STANDARD AIRCRAFT BOOK
1 0470-3-3/16 OFFSET RIVET SET (3/16”) 1 18431 NEEDLE NOSE PLIERS 1 5000-40 THREADED DRILL BIT (40)
1 0470-3-1/4 OFFSET RIVET SET (1/4”) 1 18627 LINEMANS PLIERS 1 5000-30 THREADED DRILL BIT (30)
1 750 FLUSH RIVET SET 1 2078308 VISE GRIP CUTTING PLIER 1 5000-21 THREADED DRILL BIT (21)
1 12A RUBBERGUARD SET (1”) 1 10-935 1/4” DRIVE SPEED HANDLE 1 5000-12 THREADED DRILL BIT (12)
1 142 BUCKING BAR 1 3539 3” HI-LOCK INSTALLER 1 6WR 6” REV. WIRE TWISTER
1 147 BUCKING BAR 1 36021 SWIVEL RIVETER 1 AT540A-KIT SCREW AND BOLT REMOVER
1 148 BUCKING BAR 1 575-50A 3/8” X 50’ HOSE 1 ATS5101 STRAIGHT MINI DIE GRINDER
1 149 BUCKING BAR 1 53167 SCREWDRIVER SET 1 ATS5105 90° MINI DIE GRINDER
13 CL-3/32 CLECOS (3/32”) 1 6LN VISE-GRIP PLIERS 1 ATS6131 45° ANGLE AIR DRILL
13 CL-1/8 CLECOS (1/8”) 1 7210 TAPE MEASURE 1 ATS6132 90° ANGLE AIR DRILL
12 CL-5/32 CLECOS (5/32”) 1 7R VISE GRIP PLIER 1 ATS8806 AIR HYDRAULIC RIVETER
12 CL-3/16 CLECOS (3/16”) 1 80313 12PT STANDARD&DEEP SOCKET 1 ATSMV01 MINI VACUUM
1 131 CLECO PLIERS 1 85599 OPEN END WRATCHING SET 1 04995N 10” HALF ROUND BASTARD FILE
1 130HD RIVET CUTTER 1 93813 1/4”X3/8” APEX BIT HOLDER 1 09179 10” MILL BASTARD
1 B22 INSPECTION MIRROR 1 CB21-17 17” CANVAS TOOL BAG 1 12019 10” ROUND BASTARD
1 C711H 11” AUTO WRENCH 1 EZ6 6” RULER 1 M1R AVIATION SNIP LEFT
1 13196 10” SQUARE BASTARD FILE 1 21455 8” FILE CARD 1 M2R AVIATION SNIP RIGHT
1 14290M 8” SLIM TRIANGULAR FILE 5 21474H FILE HANDLE 1 M3R AVIATION SNIP STRAIGHT
1 GT148 8” CALIPER 1 PL25 MINI-FLOURSCENT LIGHT
1 CB-S9 ROTARY BURR SET 1 RLP2 ROLOC DISC PAD 2”
1 S35P SCREW EXTRACTOR SET 1 RLP3 ROLOC DISC PAD 3”
1 SG94 SCREW GRAB 1 SPC75 PIN PUNCH SET
1 81924 14PC WRENCH SET 1 15530 BALL PEEN HAMMER

This kit was designed at the request of several FBO’s and repair stations who desire their new hires to have a standard set of
airframe tools that would allow them to do their required tasks. It features a set of common hand tools such as screwdrivers,
hammers, and wrenches; as well as the more aviation specific tools such as a rivet gun, angle drill and die grinders.
AMK-2602A..............................................................(With 2602A Economy 3X Rivet Gun)........................................................... $1,985.95
AMK-2X........................................................................... (With ATS Pro 2X Rivet Gun)................................................................... $1,989.95
AMK-3X........................................................................... (With ATS Pro 3X Rivet Gun)................................................................... $1,995.95
AMK-4X........................................................................... (With ATS Pro 4X Rivet Gun)................................................................... $1,999.95

6 800-248-0638 AIRCRAFT TOOL SUPPLY www.aircraft-tool.com

 RIVETING KITS
DELUXE RIVETING KIT

We added $100 more

value to our popular 150
piece kit, and lowered SAVE OVER
the price to give you
even more savings! 20%

QTY PART DESCRIPTION QTY PART DESCRIPTION QTY PART DESCRIPTION

1 ATS-XX ATS PRO RIVET GUN 1 ATS6104 REV. AIR DRILL (3/8” CHUCK) 1 ATSRS-3SD HAND RIVET SQUEEZER
1 KMC-1022 HOMARK 22” TOOLBOX 1 DS-12 DRILL STOP (3/16) 1 4263DP-2 DIMPLE DIE SET (3/32)
1 140 BUCKING BAR 1 DS-21 DRILL STOP (5/32) 1 4264DP-2 DIMPLE DIE SET (1/8)
1 141 BUCKING BAR 1 DS-30 DRILL STOP (1/8) 1 4265DP-2 DIMPLE DIE SET (5/32”)
1 142 BUCKING BAR 1 DS-40 DRILL STOP (3/32) 1 4266DP-2 DIMPLE DIE SET (3/16”)
1 147 BUCKING BAR 1 A601 ANGLE DRILL ATTACHMENT 1 4703-2 SQUEEZER SET (3/32”)
1 148 BUCKING BAR 1 1824 AIR REGULATOR 1 4704-2 SQUEEZER SET (1/8”)
20 CL-3/32 CLECOS (SILVER) 1 130 RIVET CUTTER 1 4705-2 SQUEEZER SET (5/32”)
20 CL-1/8 CLECOS (COPPER) 1 64823 HAND NIBBLER 1 4706-2 SQUEEZER SET (3/16”)
20 CL-5/32 CLECOS (BLACK) 1 ATSRS-1SDY 1 1/2” YOKE 1 4710-2 SQUEEZER SET (FLUSH 1/2”)
20 CL-3/16 CLECOS (GOLD) 1 61 STRAP DUPLICATOR (3/32) 1 3710-2 SQUEEZER SET (FLUSH 3/8”)
1 131 CLECO PLIERS 1 62 STRAP DUPLICATOR (1/8) 1 06785 DIMPLE DIE ORGANIZER
1 470-3-3/32 RIVET SET (AN470, 3/32”) 1 63 STRAP DUPLICATOR (5/32)) 1 133 STOP COUNTERSINK
1 470-3-1/8 RIVET SET (AN470, 1/8”) 1 65 STRAP DUPLICATOR (3/16) 1 1000-100-40 PILOTED CUTTER (3/32)
1 470-3-5/32 RIVET SET (AN470, 5/32”) 1 FP10 FLUTING PLIERS 1 1000-100-30 PILOTED CUTTER (1/8)
1 470-3-3/16 RIVET SET (AN470, 3/16”) 1 SP2005 CHIP CHASER 6” 1 1000-100-21 PILOTED CUTTER (5/32)
1 0470-3-3/32 OFFSET RIVET SET (3/32”) 1 ATB8362 STANDARD AIRCRAFT BOOK 1 1000-100-12 PILOTED CUTTER (3/16)
1 0470-3-1/8 OFFSET RIVET SET (1/8”) 1 5000-40 THREADED DRILL BIT (3/32) 1 4187 DIMPLE DIE BLOCK
1 0470-3-5/32 OFFSET RIVET SET (5/32”) 1 5000-30 THREADED DRILL BIT (1/8) 1 12A RUBBERGUARD FLUSH SET
1 0470-3-3/16 OFFSET RIVET SET (3/16”) 1 5000-21 THREADED DRILL BIT (5/32) 1 750 FLUSH RIVET SET
1 M6R OFFSET SNIP (LEFT CUT) 1 5000-12 THREADED DRILL BIT (3/16)
1 M7R OFFSET SNIP (RIGHT CUT)

Our Deluxe Riveting Kit contains everything needed to build and maintain an all metal aircraft. This kit is highly recommended
for the professional mechanic or the experienced home builder.
135-2602AKT...........................................................(With 2602A Economy 3X Rivet Gun).............................................................. $969.95
135-2XKT........................................................................ (With ATS Pro 2X Rivet Gun)...................................................................... $995.95
135-3XKT........................................................................ (With ATS Pro 3X Rivet Gun)...................................................................... $999.95
135-4XKT........................................................................ (With ATS Pro 4X Rivet Gun)................................................................... $1,005.95

800-248-0638 AIRCRAFT TOOL SUPPLY www.aircraft-tool.com 7

 RIVETING KITS
MASTER BUILDER’S KIT

SAVE OVER
15%
ON OUR
635 PIECE KIT

QTY PART DESCRIPTION QTY PART DESCRIPTION QTY PART DESCRIPTION

1 ATS-XX ATS PRO RIVET GUN 1 133 ADJUSTABLE MICROSTOP 1 SP2005 CHIP CHASER (6”)
1 KMC-1022 HOMARK 22” TOOL BOX 1 1000-100-40 PILOT CUTTER (3/32) 1 SP2005S CHIP CHASER (2.5”)
1 1824 AIR REGULATOR 1 1000-100-30 PILOT CUTTER (1/8) 1 ATS6104 REVERSIBLE AIR DRILL
1 470-3-3/32 RIVET SET (AN470, 3/32”) 1 1000-100-21 PILOT CUTTER (5/32) 2 012-40 COBALT DRILL BITS
1 470-3-1/8 RIVET SET (AN470, 1/8”) 1 1000-100-12 PILOT CUTTER (3/16) 2 012-30 COBALT DRILL BITS
1 470-3-5/32 RIVET SET (AN470, 5/32”) 1 4187 DIMPLE DIE BLOCK SET 2 012-21 COBALT DRILL BITS
1 470-3-3/16 RIVET SET (AN470, 3/16”) 1 4263DP-2 DIMPLE DIE SET (3/32) 2 012-12 COBALT DRILL BITS
1 0470-3-3/32 OFFSET RIVET SET (3/32”) 1 4264DP-2 DIMPLE DIE SET (1/8) 1 DS-40 DRILL STOP (3/32)
1 0470-3-1/8 OFFSET RIVET SET (1/8”) 1 4265DP-2 DIMPLE DIE SET (5/32”) 1 DS-30 DRILL STOP (1/8)
1 0470-3-5/32 OFFSET RIVET SET (5/32”) 1 4266DP-2 DIMPLE DIE SET (3/16”) 1 DS-21 DRILL STOP (5/32”)
1 0470-3-3/16 OFFSET RIVET SET (3/16”) 1 4703-2 SQUEEZER SET (3/32”) 1 DS-12 DRILL STOP (3/16)
1 750 FLUSH RIVET SET 1 4704-2 SQUEEZER SET (1/8”) 1 013-40 EXTENSION DRILL BIT (6”)
1 12A RUBBERGUARD SET (1”) 1 4705-2 SQUEEZER SET (5/32”) 1 013-30 EXTENSION DRILL BIT (6”)
1 12C RUBBERGUARD SET (1-1/2”) 1 4706-2 SQUEEZER SET (3/16”) 1 013-21 EXTENSION DRILL BIT (6”)
1 140 BUCKING BAR 2 4710-2 SQUEEZER SET (FLUSH 1/2”) 1 013-12 EXTENSION DRILL BIT (6”)
1 141 BUCKING BAR 2 3710-2 SQUEEZER SET (FLUSH 3/8”) 1 61 STRAP DUPLICATOR (3/32)
1 142 BUCKING BAR 1 06785 DIMPLE DIE ORGANIZER 1 62 STRAP DUPLICATOR (1/8)
1 147 BUCKING BAR 1 5022-3A HAND RIVET SQUEEZER (3”) 1 63 STRAP DUPLICATOR (5/32”)
1 148 BUCKING BAR 1 RS1004A LONGERON YOKE 1 65 STRAP DUPLICATOR (3/16)
1 149 BUCKING BAR 1 RS1005A 4” YOKE 1 001A AUTOMATIC CENTER PUNCH
120 CL-3/32 CLECOS (3/32”) 1 RS1006A CLOSE QUARTERS YOKE 1 ATB8362 STANDARD AIRCRAFT BOOK
120 CL-1/8 CLECOS (1/8”) 1 RS-BK BENCH MOUNT 1 1341A RIVET REMOVAL TOOL
120 CL-5/32 CLECOS (5/32”) 1 HS144 HAND SEAMER 1 A601 ANGLE DRILL ATTACHMENT
120 CL-3/16 CLECOS (3/16”) 1 FT100 HOLE FLANGING TOOL 2 5000-40 THREADED DRILL BIT (40)
4 26EL SIDE GRIP FASTENER 1 302-32 SAFETY WIRE (.032) 2 5000-30 THREADED DRILL BIT (30)
4 542 SPRING TENSION CLAMPS 1 515A BURNISHING TOOL 2 5000-21 THREADED DRILL BIT (21)
10 KWN-3/32 WINGNUT FASTENER (3/32”) 1 FP10 FLUTING PLIERS 2 5000-12 THREADED DRILL BIT (12)
10 KWN-1/8 WINGNUT FASTENER (1/8”) 1 5B CIRCLE (FLY) CUTTER 1 M6R OFFSET SNIP (LEFT CUT)
10 KWN-5/32 WINGNUT FASTENER (5/32”) 1 HC1 ADJUSTABLE HOLE CUTTER 1 M7R OFFSET SNIP (RIGHT CUT)
10 KWN-3/16 WINGNUT FASTENER (3/16”) 1 SP375A SPEED DEBURRING TOOL 1 144ST BENDER BRAKE (18”)
1 131 CLECO PLIERS 1 64823 HAND NIBBLER 1 6WR 6” REV. WIRE TWISTER
1 130HD RIVET CUTTER 1 C5R CRIMPER

This comprehensive riveting kit contains the tooling needed to build some of the most popular aluminum airplanes, including
the RV series, and the Midget Mustang. It’s also very popular with mechanics needing an all-in-one riveting kit
MBK-2602A..............................................................(With 2602A Economy 3X Rivet Gun)........................................................... $1,925.95
MBK-2X........................................................................... (With ATS Pro 2X Rivet Gun)................................................................... $1,932.95
MBK-3X........................................................................... (With ATS Pro 3X Rivet Gun)................................................................... $1,935.95
MBK-4X........................................................................... (With ATS Pro 4X Rivet Gun)................................................................... $1,939.95

8 800-248-0638 AIRCRAFT TOOL SUPPLY www.aircraft-tool.com

 RIVETING KITS
UNIVERSITY STUDENTS RIVETING KIT AIRCRAFT MECHANIC’S RIVETING KIT

QTY PART DESCRIPTION

1 ATS-XX ATS 3X PRO RIVETING GUN
1 1824 AIR TOOL REGULATOR
1 470-3-1/8 1/8” STRAIGHT RIVET SET
QTY PART DESCRIPTION
1 470-3-3/16 3/16” STRAIGHT RIVET SET 1 ATS-XX ATS 3X PRO RIVETING GUN
1 470-3-3/32 3/32” STRAIGHT RIVET SET 1 1824 AIR TOOL REGULATOR
1 470-3-5/32 5/32” STRAIGHT RIVET SET 1 140 BUCKING BAR
1 750 FLUSH STRAIGHT RIVET SET 1 142 BUCKING BAR
1 142 BUCKING BAR 1 147 BUCKING BAR
1 130 RIVET CUTTER 1 148 BUCKING BAR
12 CL-3/32 CLECOS (SILVER) 1 470-3-1/8 1/8” STRAIGHT RIVET SET
12 CL-1/8 CLECOS (COPPER) 1 470-3-3/16 3/16” STRAIGHT RIVET SET
8 CL-5/32 CLECOS (BLACK) 1 470-3-3/32 3/32” STRAIGHT RIVET SET
8 CL-3/16 CLECOS (GOLD) 1 470-3-5/32 5/32” STRAIGHT RIVET SET
1 131 CLECO PLIERS 1 750 FLUSH STRAIGHT RIVET SET
1 ATS6104 REVERSIBLE AIR DRILL 1 0470-3-1/8 1/8” OFFSET RIVET SET
2 012-40 COBALT DRILL BITS 1 0470-3-3/16 3/16” OFFSET RIVET SET
2 012-30 COBALT DRILL BITS 1 0470-3-3/32 3/32” OFFSET RIVET SET
1 012-21 COBALT DRILL BIT 1 0470-3-5/32 5/32” OFFSET RIVET SET
1 012-12 COBALT DRILL BIT 5 CL-3/32 CLECOS (SILVER)
1 DS-40 DRILL STOP 5 CL-1/8 CLECOS (COPPER)
1 DS-30 DRILL STOP 5 CL-5/32 CLECOS (BLACK)
1 DS-21 DRILL STOP 5 CL-3/16 CLECOS (GOLD)
1 DS-12 DRILL STOP 1 131 CLECO PLIERS
1 19000 TOOL BOX 1 19000 TOOL BOX

This kit is specifically designed for the Airframe student. It’s equipped A perfect starter kit for the A&P mechanic, the KT series of kits con-
with all of the essential tools needed to work on sheet metal. This tains just the essentials needed for riveting. This kit is most commonly
kit is currently being used by students in schools such as Vincennes used as a starting point for mechanics wishing to make their own
University and others. customized kits.
2602ASTUD......... (With 2602A Ecomomy 3X Gun)............. $285.95 2602AKT..............(With 2602A Economy 3X Gun).............. $269.95
2XSTUD....................... (With ATS Pro 2X Gun).....................$323.95 2XKT........................... (With ATS Pro 2X Gun).....................$299.95
3XSTUD....................... (With ATS Pro 3X Gun).....................$329.95 3XKT........................... (With ATS Pro 3X Gun).....................$309.95
4XSTUD....................... (With ATS Pro 4X Gun).....................$339.95 4XKT........................... (With ATS Pro 4X Gun).....................$315.95

Didn’t find the kit you were looking for?...Why not build your own!
Send us your list via e-mail to quotes@aircraft-tool.com to receive an immediate quotation. And be sure to include your
delivery address and preferred method of shipment if you would like us to also quote shipping charges.

800-248-0638 AIRCRAFT TOOL SUPPLY www.aircraft-tool.com 9

 RIVETING KITS
RV-12 QUICK BUILD KIT

The new RV-12 is so easy to assemble it requires virtually no sheet metal skills, and needs little more than a few hand tools. We’ve
made your task even easier by bringing together all the tools you’ll need into one kit, and priced it to be easy on your wallet.
RV12-KIT...................................................................................................................................................................................... $1,598.95

RV BUILDER’S EMPENNAGE KIT

Upgrade your Empennage Kit to the full RVK Kit

with our RVS-UPG Upgrade Package.
RVS-X Kit

This scaled down version of our RV Builder’s Kit contains just the tools you need to get your feet wet with sheet metal construc-
tion. The kit closely follows the recommended tools list from Van’s RV TRAINING PROJECT-1 and their TOOL BOX KIT projects. This
kit is also the minimum recommended set of tools to build the empennage (tail) section of the RV3, RV4, RV7, RV8, RV9, and
RV10 series of home built airplanes. Start out with this kit, and when you’re ready to do more advanced work, get the upgrade
package to take you all the way up to the full RV Builder’s Tool Kit.
RVS-2602A.......................................................................(With 2602A 3X Rivet Gun)...................................................................... $916.95
RVS-2X............................................................................ (With ATS Pro 2X Rivet Gun)...................................................................... $922.95
RVS-3X............................................................................ (With ATS Pro 3X Rivet Gun)...................................................................... $925.95
RVS-UPG...............................................................................(Upgrade Package)........................................................................... $976.95

10 800-248-0638 AIRCRAFT TOOL SUPPLY www.aircraft-tool.com

 RIVETING KITS
RV BUILDER’S KIT

Redone to conform to
Van’s newest listing

QTY PART DESCRIPTION QTY PART DESCRIPTION QTY PART DESCRIPTION

1 ATS-XX ATS RIVET GUN 1 014-40 12” DRILL BIT (40) 1 FP21 FLUTING PLIERS
1 113M E-Z RETAINER SPRING 1 014-30 12” DRILL BIT (30) 1 130HD RIVET CUTTER
1 7922R SWIVEL AIR REGULATOR 1 SP375A SPEED DEBURRING TOOL 1 ATSOIL ATS AIR TOOL OIL
1 181 SWIVEL FLUSH SET (1”) 1 131 CLECO PLIERS 1 21455 FILE CARD
1 470-3-3/32 RIVET SET (AN470, 3/32”) 4 24EL CLECO CLAMPS (1/2”) 1 20547N DUAL VIXEN FILE (10”)
1 470-3-1/8 RIVET SET (AN470, 1/8”) 4 26EL CLECO CLAMPS (1”) 1 204RV C-FRAME RIVETING TOOL
1 470-3-3/16 RIVET SET (AN470, 3/16”) 1 36021 SWIVEL POP RIVETER 1 DS-40 DRILL STOP (3/32)
1 1470-5-3/32 RIVET SET (DBL OFS 3/32”) 2 00P2 SCREWDRIVER BITS (2) 1 DS-30 DRILL STOP (1/8)
1 1470-5-1/8 RIVET SET (DBL OFS 1/8”) 1 5022-3A RIVET SQUEEZER (3”) 1 DS-21 DRILL STOP (5/32)
1 1470-5-3/16 RIVET SET (DBL OFS 3/16”) 1 RS-BK SQUEEZER BENCH MOUNT 1 DS-12 DRILL STOP (3/16)
1 148 BUCKING BAR 1 4704-2 SQUEEZER SET (1/8”) 1 A601 ANGLE DRILL ATTACHMENT
1 149 BUCKING BAR 1 4706-2 SQUEEZER SET (3/16”) 1 PT-1136A CORDLESS SCREWDRIVER
1 142 BUCKING BAR 2 4710-2 SQUEEZER SET (FLUSH 1/2”) 1 5000-40 THREADED DRILL BIT (40)
1 133 MICROSTOP COUNTERSINK 2 3710-2 SQUEEZER SET (FLUSH 3/8”) 1 5000-30 THREADED DRILL BIT (30)
1 1000-100-40 PILOT CUTTER (3/32”) 1 4263DP-2 DIMPLE DIE SET (3/32) 1 5000-21 THREADED DRILL BIT (21)
1 1000-100-30 PILOT CUTTER (1/8”) 1 4264DP-2 DIMPLE DIE SET (1/8) 1 5000-12 THREADED DRILL BIT (12)
1 1000-100-28 PILOT CUTTER (6 SCREW) 1 4508DP-2 DIMPLE DIE SET (8 SCREW) 1 2470 BACK RIVET SET
1 1000-100-19 PILOT CUTTER (8 SCREW) 1 52-340-024 STAINLESS STEEL RULE 24” 1 AE1065 BACK RIVET PLATE
1 1000-100-12 PILOT CUTTER (10 SCREW) 1 UNIBIT-3 UNIBIT (1/4” - 3/4” BY 1/16”) 1 06785 DIMPLE DIE ORGANIZER
1 M6R WISS SNIP (LEFT & OFFSET) 1 MARKERS PERMANENT MARKERS 1 685-1 3M RIVETER’S TAPE
1 M7R WISS SNIP (RIGHT & OFFSET) 1 CP7AM 3M CUT & POLISH WHEEL 6” 1 CH1 DEAD BLOW HAMMER
1 ATS6104 REVERSIBLE AIR DRILL 1 QM24 HEARING PROTECTOR 1 HS144 HAND SEAMER
6 012-40 COBALT DRILL BITS (40) 1 5X605 SAFETY GLASSES 1 ATB8362 STANDARD AIRCRAFT BOOK
6 012-30 COBALT DRILL BITS (30) 325 CL-3/32 CLECOS (3/32) 1 SP2005 6” CHIP CHASER
2 012-19 COBALT DRILL BITS (19) 175 CL-1/8 CLECOS (1/8) 1 SP2005S 2.5” CHIP CHASER
2 012-12 COBALT DRILL BITS (12) 1 SVB-KIT DEBURRING SET 1 KMC-1022 HOMARK 22” TOOL BOX
2 012-21 COBALT DRILL BITS (21) 1 SP201A EDGE SCRAPER

Our RV Builder’s Kit closely conforms to Van’s recommended tool list for their very popular line of RV home-built airplanes. It con-
tains all of the tools necessary to successfully assemble the RV3, RV4, RV7, RV8, RV9, and RV10 series of home built airplanes.
RVK-2602A.............................................................. (With 2602A Economy 3X Rivet Gun)........................................................... $1,910.95
RVK-2X............................................................................ (With ATS Pro 2X Rivet Gun)................................................................... $1,898.95
RVK-3X............................................................................ (With ATS Pro 3X Rivet Gun)................................................................... $1,919.95

800-248-0638 AIRCRAFT TOOL SUPPLY www.aircraft-tool.com 11

 RIVET GUNS
ATS PRO X-SERIES RIVET GUNS

I’ve never used a bucking type rivet gun before and I had some
leaky 1/4 inch aluminum rivets to replace in my boat. As soon as
I got the gun and the correct 1/4 set I replaced a dozen 1/4 inch
rivets and tested all. No leaks! Great tool. Well worth the money.
Scan to view Looks to be a quality tool no junk. ~ Jeffrey
video

Lifetime Warranty

IMPROVED
TRIGGER
VALVE

Includes beehive and mechaid springs plus a

FREE bottle of ATS Tool Oil

We’ve re-engineered the throttle valve of our top of the line ATS Pro-X Rivet Guns to give you unmatched controllabil-
ity when setting rivets of any type or size. With the improved variable power control at your fingertips, you’ll be able to
confidently perform the proper steps of riveting which are: aligning the rivet (tapping); enlarging it into the hole (swell-
ing); and driving it to its finished size (bucking). This is no air hammer, it’s a true rivet gun - and there is a difference.
Take advantage of our hassle-free 30 Day Money Back Guarantee and try it for yourself. And if it doesn’t meet your
expectations, send it back and we’ll refund your full purchase price with no questions asked. This is also backed by our
complete unconditional LIfetime Warranty! Note: Our ATS-3X is our most popular model.

PART BPM CAP. STROKE PRICE

ATS-2X 2580 1/8” 2-1/4” $175.95
ATS-3X 2160 3/16” 2-7/8” $179.95
ATS-4X 1740 1/4” 3-1/16” $185.95

12 800-248-0638 AIRCRAFT TOOL SUPPLY www.aircraft-tool.com

 RIVET GUNS
DESIGNER SERIES ATS PRO X-SERIES RIVET GUNS

Lifetime Warranty

Express your individuality with our Designer Pro Rivet Gun. You get the same rugged durability, reliability, and power
of our Pro Series Rivet gun in an array of brilliant colors that will set you apart from the ordinary. Everything about this
gun, from its rich vibrant color to the laser-etched ATS Pro logo on the side, reflects the outstanding quality you’ve
come to expect from ATS.
PART BPM CAP. STROKE PRICE
ATS-2X-(color) 2580 1/8” 2-1/4” $199.95
ATS-3X-(color) 2160 3/16” 2-7/8” $205.95
ATS-4X-(color) 1740 1/4” 3-1/16” $209.95
COLOR DESCRIPTION
RED CANDY APPLE RED
BLUE COBALT BLUE
GREEN METALLIC JADE
BLACK STARLIGHT BLACK
Ordering Instructions: When ordering, please specify the size of the rivet gun, as well as the color desired.
Example: to order a RED 2X gun, use part number ATS-2X-RED.

ATS PRO RIVET GUN KITS

Our Best selling ATS pro riveting kit combines our excellent ATS Pro
rivet gun with a selection of essential tools you’ll need to successfully
to complete your next riveting job. The complete kit includes our ATS
Pro series rivet gun with its newly redesigned throttle and its lifetime
warranty; a selection of 4 bucking bars (141, 142, 148, 149), a set of
5 straight rivet sets, 4 offset rivet sets, 1 rubber guard flush rivet set, an
air regulator, and a bottle of ATS tool oil. And it all comes packaged
in a protected form fitted, blow molded case.
Note: If you already own an ATS Rivet Gun, you can upgrade to the full
kit by purchasing the upgrade package which contains everything ex-
Lifetime Warranty
cept the Rivet Gun.
ATS-2602PK................... (Economy Gun Kit)....................... $229.95
ATS-2XPK.............................(2X Gun Kit).............................$295.95
ATS-3XPK.............................(3X Gun Kit).............................$299.95
ATS-4XPK.............................(4X Gun Kit).............................$305.95
ATS-PKU...................... (Upgrade Kit - No Gun)....................$175.95

800-248-0638 AIRCRAFT TOOL SUPPLY www.aircraft-tool.com 13

 RIVET GUNS
ATS PRO JIFFY-STYLE RIVETING KIT ATS PRO .498” LARGE BORE RIVET GUNS

Lifetime Warranty

Our .498 shank rivet guns are heavy hitting to handle those larger
Lifetime Warranty riveting jobs that are beyond the capacity of smaller .401” shank
rivet guns. Excellent for driving rivets of 1/4” diameter or larger. Com-
This Jiffy-Style Professional Riveting Kit is compact enough to get into pletely interchangeable with Chicago Pneumatic guns, and they
impossibly tight riveting areas, while still delivering the full power of a have excellent finger tip control. Accepts .498” shank rivet sets and
3X riveting gun. It features our ATS-200B Jiffy-Style Riveting Gun with a attachments, but we’ve also included at no extra cost a .401” shank
two stage trigger to properly “set” the rivet prior to bucking it. It also adapter (p/n SR498401) that allows you to use .401” tooling.
includes a full complement of rivet sets (snaps) to cover 3/32”, 1/8”,
5/32”, and 3/32” Universal Head (AN470), Modified Brazier (AN456), PART BPM CAP. STROKE WGT PRICE
and Flush Head (AN426) rivets. We’ve added two of our most popu- ATS-5X 1560 1/4” 2-11/16” 4.84 lbs $315.95
lar Bucking Bars to help you get started right away. Completing this
great package is a durable military-style canvas bag with ample ATS-7X 900 3/8” 5-13/16” 5.94 lbs $365.95
space for your kit.
ATS-200BK...................(Without Bucking Bars).................... $245.95 .498 RIVET SETS
ATS-200BK2................... (With Bucking Bars)....................... $259.95
ATS-200B..............................(Gun Only)............................. $199.95

JIFFY GUN STUBBY RIVET SETS

These rivet sets are designed to work with our ATS Pro 5X and 7X Rivet
guns.
PART DIAMETERS AVAILABLE PRICE
STRAIGHT 3 1/2” UNIVERSAL HEAD (AN470)
510 SERIES 520 SERIES 502 SERIES K470-3 3/32, 1/8, 5/32, 3/16, 1/4 $13.95
OFFSET 3 1/2” UNIVERSAL HEAD (AN0470)
These rivet sets are designed to work with our ATS Pro 200B Rivet gun.
They will also work with any Jiffy 100 or 200 rivet guns. K0470-3 3/32, 1/8, 5/32, 3/16, 1/4 $15.95
3 1/2” MODIFIED BRAZIER (AN456)
STRAIGHT RIVET SETS
K456-3 3/32, 1/8, 5/32, 3/16,1/4 $14.95
PART SIZE PRICE PART SIZE PRICE
3 1/2” BRAZIER HEAD (AN455)
J510-4703 3/32” $10.95 J510-4706 3/16” $9.95
J510-4704 1/8” $10.95 J502 Flush $10.95 K455-3 3/32, 1/8, 5/32, 3/16,1/4 $13.95
J510-4705 5/32” $10.95 3 1/2” FLAT HEAD (AN442)
J510-SET 5 Piece Set (4 AN470 Sets & 1 Flush Set) $49.95 K442-3 3/32, 1/8, 5/32, 3/16,1/4 $13.95
10 DEGREE OFFSET RIVET SETS 3 1/2” BUTTON HEAD (AN435)
J520-4703 3/32” $11.95 J520-4705 5/32” $11.95 K435-3 3/32, 1/8, 5/32, 3/16,1/4 $13.95
J520-4704 1/8” $11.95 J520-4706 3/16” $11.95 3 1/2” ROUND HEAD (AN430)
J520-SET 4 Piece Set (AN470 Offset Sets) $41.95 K430-3 3/32, 1/8, 5/32, 3/16,1/4 $13.95

14 800-248-0638 AIRCRAFT TOOL SUPPLY www.aircraft-tool.com

 RIVET GUNS
RETAINER SPRINGS
ATS ECONOMY AIRCRAFT RIVET GUN

113B 113M

Fits all Rivet Guns and Air Hammers with a

.401” shank.
113M.........(Mechaid Retainer)...........$4.95
113B...........(Beehive Retainer)............$4.95
113B-1/4..... (Beehive for 1/4”).............$5.95
13M.......... (Spring Retainer Set)..........$7.95

RIVET GUN AIR REGULATORS

Includes beehive and mechaid springs plus

a FREE bottle of ATS Tool Oil

The next generation of our best-selling 2602 Economy Rivet Gun is 6 ounces lighter,
better balanced, and features a two-stage trigger. We’ve engineered the 2602A with
your safety in mind by adding an ergonomic, vibration-reducing rubber grip that
significantly reduces the hand-numbing effects of vibration shock. The 2602A has 7922R 1824 5401
been recommended for use in many kits by their manufacturers such as the RV’s,
Thorp T-18, and the Midget Mustang. 0-2160 BPM, weight 3.2 lbs., 3CFM at 90 psi, Precision, quality built regulators, accurate-
.401 shank. ly control airflow at up to 150 psi. 1/4” NPT
thread size.
2602A...................................................(Rivet Gun Only)........................... $129.95
ATS-2602PK..............................................(Rivet Gun Kit)............................ $229.95 7922R..... (360° Swivel Regulator)......$12.95
1824......(Positive Lock Regulator).....$14.95
5401....... (Low-Profile Regulator).........$7.95
ANTI-VIBRATION GLOVES TOOL OIL

RIVET GUN SHANK ADAPTER

(.498 TO .401)

Anti-viberation gloves are designed to re-

duce vibration from pneumatic and vibrat-
ing tools or repetitive motions. The glove ATSOIL ATSOIL-QT
features strategically placed 5.0mm mem-
ATS brand Synthetic Air Tool Oil is ideal for all This adapter reduces the shank bore of
ory foam on the palm and thumb.
air powered tools. Will not gum up like most .498 rivet guns (5X and higher) so that you
YGC78-S..............(Small)...................$27.95 can use standard .401” tooling with them.
petroleum or fish oil lubricants. Mild solvent
YGC78-M......... (Medium)................$27.95 action cleans as it lubricates. Pleasant “or- Hardened tool steel construction. Precisely
YGC78-L............. (Large)...................$27.95 ange” scent. ground. Remember to use a regulator when
YGC78-XL....... (Extra Large)..............$27.95 ATSOIL..................(4 oz)......................$4.95 using .401 tools with a large bore gun.
YGC78-2XL............ (2X).....................$27.95 ATSOIL-QT.............(1 qt)....................$12.95 SR498401.........................................$14.95

800-248-0638 AIRCRAFT TOOL SUPPLY www.aircraft-tool.com 15

 RIVETS
CHERRYMAX® FLUSH HEAD CHERRYMAX® UNIVERSAL HEAD

CR3212 & CR3242 CR3213 & CR3243

GRIP NOMINAL (CR3212) OVERSIZE (CR3242) NOMINAL (CR3213) OVERSIZE (CR3243)

SIZE
LENGTH 50 PCS 100 PCS 50 PCS 100 PCS 50 PCS 100 PCS 50 PCS 100 PCS
4-1 VARIES N/A N/A $33.95 $62.95 $33.95 $62.95 $29.95 $54.95

4-2 .063-.125 $25.95 $46.95 $26.95 $49.95 $26.95 $49.95 $35.95 $65.95

4-3 .126-.187 $25.95 $46.95 $28.95 $52.95 $26.95 $49.95 $25.95 $46.95

4-4 .188-.250 $26.95 $49.95 $28.95 $52.95 $28.95 $52.95 $28.95 $52.95

4-5 .251-.312 $29.95 $54.95 $32.95 $59.95 $33.95 $62.95 $30.95 $57.95

4-6 .313-.375 $28.95 $52.95 $36.95 $67.95 $36.95 $67.95 $36.95 $67.95

4-7 .376-.437 $34.95 $63.95 $36.95 $67.95 $43.95 $80.95 $37.95 $70.95

4-8 .438-.500 $52.95 $97.95 $39.95 $72.95 $52.95 $97.95 $45.95 $84.95

5-1 .031-.062 POA POA POA POA POA POA POA POA

5-2 .063-.125 $30.95 $55.95 $28.95 $52.95 $28.95 $52.95 $32.95 $59.95

5-3 .126-.187 $28.95 $52.95 $30.95 $55.95 $28.95 $52.95 $32.95 $59.95

5-4 .188-.250 $29.95 $54.95 $29.95 $54.95 $28.95 $52.95 $30.95 $55.95

5-5 .251-.312 $31.95 $58.95 $31.95 $58.95 $31.95 $58.95 $35.95 $65.95

5-6 .313-.375 $40.95 $75.95 $31.95 $58.95 $35.95 $65.95 $36.95 $67.95

5-7 .376-.437 $54.95 $101.95 $43.95 $80.95 $42.95 $78.95 $39.95 $72.95

5-8 .438-.500 $45.95 $84.95 $39.95 $72.95 $44.95 $81.95 $40.95 $75.95

6-1 .037-.062 POA POA POA POA POA POA POA POA

6-2 .063-.125 $33.95 $62.95 $31.95 $58.95 $39.95 $72.95 $29.95 $54.95

6-3 .126-.187 $35.95 $65.95 $28.95 $52.95 $33.95 $62.95 $30.95 $57.95

6-4 .188-.250 $32.95 $59.95 $53.95 $100.95 $33.95 $62.95 $29.95 $54.95

6-5 .251-.312 $33.95 $62.95 $45.95 $84.95 $39.95 $72.95 $30.95 $57.95

6-6 .313-.375 $41.95 $76.95 $37.95 $70.95 $33.95 $62.95 $33.95 $62.95

6-7 .376-.437 $39.95 $72.95 $40.95 $75.95 $47.95 $88.95 $39.95 $72.95

6-8 .438-.500 $40.95 $75.95 $84.95 $156.95 $44.95 $83.95 $39.95 $72.95

CHERRYMAX RIVET ASSORTMENT SWIVEL BLIND RIVETER

This riveter has a swivel head
An assortment of 125 rivets which rotates a full 360° for ver-
consisting of 25 each of satility, doubleing as a 90° off-
the 5 most popular sizes: set riveter, or a straight (in line)
CR3243-4-1, CR3243-4-2, puller just by rotating the head.
PULLS
CR3243-4-3, CR3242-4-2, Pulls up to 3/16” Cherrymax®
CHERRY
and CR3242-4-3. and other blind rivets without
MAX
additional attachments.
CM25..............................................................................$79.95 36021..............................................................................$37.95

16 800-248-0638 AIRCRAFT TOOL SUPPLY www.aircraft-tool.com

 RIVETS
SOLID ALUMINUM RIVETS
Medium-hard (AD) solid Aluminum rivets have a gold anodized finish to
MS20426 MS20470 resist corrosion. When ordering, note that the first dash gives the diam-
Series Series eter in 1/32” increments, and the second dash gives the length in 1/16”
increments. Example: MS20470AD-4-5 is an 1/8” Dia x 5/16” Length.

PART NUMBER 1/4LB PART NUMBER 1LB CERT PART NUMBER 1/4LB PART NUMBER 1LB CERT
MS20426AD-3-3 $12.95 MS20426AD-3-3C $46.95 MS20470AD-3-3 $11.95 MS20470AD-3-3C $42.95

MS20426AD-3-4 $14.95 MS20426AD-3-4C $53.95 MS20470AD-3-4 $9.95 MS20470AD-3-4C $36.95

MS20426AD-3-5 $9.95 MS20426AD-3-5C $36.95 MS20470AD-3-5 $9.95 MS20470AD-3-5C $34.95

MS20426AD-3-6 $9.95 MS20426AD-3-6C $34.95 MS20470AD-3-6 $8.95 MS20470AD-3-6C $32.95

MS20426AD-3-7 $8.95 MS20426AD-3-7C $32.95 MS20470AD-3-7 $8.95 MS20470AD-3-7C $32.95

MS20426AD-3-8 $9.95 MS20426AD-3-8C $36.95 MS20470AD-3-8 $7.95 MS20470AD-3-8C $29.95

MS20426AD-4-3 $8.95 MS20426AD-4-3C $32.95 MS20470AD-4-3 $7.95 MS20470AD-4-3C $27.95

MS20426AD-4-4 $6.95 MS20426AD-4-4C $25.95 MS20470AD-4-4 $6.95 MS20470AD-4-4C $24.95

MS20426AD-4-5 $6.95 MS20426AD-4-5C $25.95 MS20470AD-4-5 $5.95 MS20470AD-4-5C $21.95

MS20426AD-4-6 $6.95 MS20426AD-4-6C $24.95 MS20470AD-4-6 $6.95 MS20470AD-4-6C $22.95

MS20426AD-4-7 $6.95 MS20426AD-4-7C $22.95 MS20470AD-4-7 $5.95 MS20470AD-4-7C $21.95

MS20426AD-4-8 $6.95 MS20426AD-4-8C $23.95 MS20470AD-4-8 $6.95 MS20470AD-4-8C $22.95

MS20426AD-5-3 $6.95 MS20426AD-5-3C $22.95 MS20470AD-5-3 $6.95 MS20470AD-5-3C $25.95

MS20426AD-5-4 $5.95 MS20426AD-5-4C $21.95 MS20470AD-5-4 $6.95 MS20470AD-5-4C $23.95

MS20426AD-5-5 $5.95 MS20426AD-5-5C $21.95 MS20470AD-5-5 $5.95 MS20470AD-5-5C $20.95

MS20426AD-5-6 $6.95 MS20426AD-5-6C $22.95 MS20470AD-5-6 $5.95 MS20470AD-5-6C $21.95

MS20426AD-5-7 $5.95 MS20426AD-5-7C $20.95 MS20470AD-5-7 $5.95 MS20470AD-5-7C $21.95

MS20426AD-5-8 $5.95 MS20426AD-5-8C $21.95 MS20470AD-5-8 $5.95 MS20470AD-5-8C $21.95

MS20426AD-6-3 $6.95 MS20426AD-6-3C $25.95 MS20470AD-6-3 $5.95 MS20470AD-6-3C $20.95

MS20426AD-6-4 $6.95 MS20426AD-6-4C $23.95 MS20470AD-6-4 $5.95 MS20470AD-6-4C $20.95

MS20426AD-6-5 $4.95 MS20426AD-6-5C $18.95 MS20470AD-6-5 $5.95 MS20470AD-6-5C $20.95

MS20426AD-6-6 $5.95 MS20426AD-6-6C $19.95 MS20470AD-6-6 $5.95 MS20470AD-6-6C $19.95

MS20426AD-6-7 $5.95 MS20426AD-6-7C $21.95 MS20470AD-6-7 $5.95 MS20470AD-6-7C $19.95

MS20426AD-6-8 $5.95 MS20426AD-6-8C $21.95 MS20470AD-6-8 $5.95 MS20470AD-6-8C $20.95

SHOP HEAD RIVET GAUGE HOW TO DETERMINE RIVET LENGTH

Measure the grip thickness

A
of the section to be riveted
B
AE1008 (A+B), and add to that 1.5
AE1007 L
1.5D times the rivet diameter
(D). Round result to nearest
1/16” to get length.
D D
Set of four shop head gauges plus one rivet length gauge for -3, -4,
-5, and -6 rivets. Measures rivet length as well as minimum height Example: A= .030, B= .250, Rivet Diameter (D) = .125 (1/8”)
and minimum diameter of shop heads after setting. Works for both Grip Thickness = A+B= .280; Length (L)= .280 +1.5*(.125)=
universal head and flush rivets. .4675; Multiply by 16 to find the nearest 1/16: Length*16 = 7.48
AE1007-KIT....................(Avery Brand, USA)..........................$32.95 Therefore, the correct length is either a -7 or a -8 (e.g. MS20470-
RG031-KIT...........................(Economy)...............................$13.95 4-7 or MS20426-4-8).

800-248-0638 AIRCRAFT TOOL SUPPLY www.aircraft-tool.com 17

 RIVETS
NAS1097AD “OOPS” FLUSH RIVETS SOLID RIVET ASSORTMENT PACK

NAS1097AD Flush Shear Rivets are more commonly referred to in

maintenance circles as “oops” rivets because it’s just what you need
when you accidentally make your rivet hole too big. Their smaller
head diameters are exactly the same as an AN426 flush rivet that
is one size smaller. So just drill to the next larger size, then use one of
these rivets and no one will be any the wiser. An assortment of rivets in various diameters and lengths to cover
most light riveting needs. MS20470 (universal) and MS20426 (flush)
PART NUMBER SIZE PRICE series rivets in the following sizes: 3-3, 3-4, 3-5, 4-4, 4-5, 4-6, 5-4, 5-5,
NAS1097AD-3-3.5 3/32” x 7/32” $5.95 5-6, 6-5, 6-6, 6-7.
NAS1097AD-3-3 3/32” x 3/16” $6.95 MS20470AD-PK.............(MS20470AD Rivets)........................$34.95
MS20426AD-PK.............(MS20426AD Rivets)........................$34.95
NAS1097AD-3-4 3/32” x 1/4” $4.95
NAS1097AD-3-5 3/32” x 5/16” $5.95
NAS1097AD-3-6 3/32” x 3/8” $5.95 CHERRYMAX GRIP GAUGE
NAS1097AD-4-3.5 1/8” x 7/32” $4.95
NAS1097AD-4-4 1/8” x 1/4” $4.95
NAS1097AD-4-5 1/8” x 5/16” $4.95
NAS1097AD-4-6 1/8” x 3/8” $4.95
NAS1097AD-5-4 5/32” x 1/4” $3.95
Used to determine the proper grip length of Cherrymax® rivets. Easy
NAS1097AD-5-5 5/32” x 5/16” $3.95 to use: just insert the gauge into the prepared hole, draw the gauge
NAS1097AD-5-6 5/32” x 3/8” $3.95 back until the hook contacts the backside of the structure, then take
your reading directly from the gauge.
NAS1097AD-6-5 3/16” x 5/16” $3.95
269C3.................................................................................$13.95
NAS1097AD-6-6 3/16” x 3/8” $3.95
NAS1097AD-KIT Complete Kit $21.95
CHERRYMAX RIVET TRIMMER

LANCASTER RIVET CUTTER

This heavy-duty rivet cutter

manufactured by Lancaster
Pumps is designed to mount
onto a workbench (or held in
vise), and will cut five (5) dif-
ferent diameter rivets, wire,
and screws to any of seven Ground flush for close trimming of Cherrymax rivets.
(7) different lengths. HT2......................................................................................$21.95

For more information about our products, visit our

website www.aircraft-tool.com.
RC-1.................................................................................. $142.95

18 800-248-0638 AIRCRAFT TOOL SUPPLY www.aircraft-tool.com

 RIVETS
ATS RIVET CUTTERS ATS DELUXE RIVET REMOVAL TOOL
Unique serrated nose is de-
signed to efficiently remove
both blind and solid rivets
130

Scan to view
video
Lifetime Warranty

130HD

Our Blind Rivet Removal Tool is designed to remove those stubborn

Pop, Avdel, Cherry-Qt, and other blind rivets. The serrated end cups
Cuts from 3/32” to 1/4” diameter. Cuts same length every time with over any button head, round head, or universal head rivet and locks
use of Rivet leaf spacers. in place to keep it from spinning as it’s being drilled out. It will also
remove solid button-head style rivets. Includes adapters to remove
130......................................(Standard)................................$21.95 3/32”, 1/8”, 5/32”, and 3/16” rivets. Not for use with steel-stemmed
130HD............................... (Heavy Duty)..............................$40.95 blind rivets.
1341S.................... (Deluxe Rivet Removal Tool)..................$75.95

CLOSE QUARTER RIVET REMOVAL TOOL ATS SOLID RIVET REMOVAL TOOL

WITH WITHOUT

This close quarter’s rivet removal kit allows you to drill straight and Cleanly removes any style button head rivet (Universal, Round, Bra-
dead center every time when removing 3/32”, 1/8”, 5/32”, 3/16”, zier , Modified Brazier, etc.) without damaging the skin. Precision
and 1/4” diameter universal head (AN470) solid rivets. Fits any air or depth control allows you to drill off the head and punch out the
electric drill. The guides are compact and will work perfectly in tight body of the rivet for a clean extraction. Includes adapters to re-
places with an angle drill. Made in the U.S.A. move 3/32”, 1/8”, 5/32”, and 3/16” rivets. Not for use with blind rivets.
LRDG-KIT........................................................................... $136.95 1341A..................... (Solid Rivet Removal Tool)....................$59.95

800-248-0638 AIRCRAFT TOOL SUPPLY www.aircraft-tool.com 19

 BUCKING BARS
TUNGSTEN BUCKING BARS

ATS6001 ATS6004 ATS6005

5/8”x1”x4” 1.6 lbs 5/8”x1.5”x2” 1.2 lbs 3/4”x1.5”x2.5” 1.6 lbs

ATS6001................................ $125.95 ATS6004................................ $119.95 ATS6005................................ $169.95

ATS6006 ATS6007 ATS6008

4”x1”x5/8” 1.3 lbs 1”x1”x2 1/2” 1.4 lbs

3/4”x1.5”x2” 2 lbs
ATS6007................................ $139.95 ATS6008................................ $125.95
ATS6006................................ $125.95

ATS6009 TUNGSTEN BUCKING BAR SETS

2 piece set contains ATS6005, ATS6006.

TBB-2...................................................................................................$265.95
3 piece set contains ATS6005, ATS6006, ATS6007.
TBB-3...................................................................................................$369.95
2 1/4”x1 1/2”x7/8” 1.2 lbs 4 piece set contains ATS6005, ATS6006, ATS6007, ATS6008
ATS6009................................ $165.95 TBB-4.................................................................................................... $449.95

20 800-248-0638 AIRCRAFT TOOL SUPPLY www.aircraft-tool.com

 BUCKING BARS
STEEL BUCKING BARS
140 141 142

5-1/8”x3”x1-5/8” 2 lbs 10-3/8”x1”x2” 3 lbs 6-3/8”x1”x2-1/4” 2 lbs

140......................................... $19.95 141......................................... $19.95 142......................................... $19.95

147 148 149

5-1/4”x2”x1” 1.5 lbs 5-1/2”x1-1/2”x2” 3 lbs

3-3/4”x2”x1” 1.5 lbs
147......................................... $19.95 149......................................... $19.95
148......................................... $19.95

150 153 154

6”x1”x1-3/4” 1.5 lbs 6”x1-1/2”x1-1/2” 1.75 lbs

2-1/2”x2”x1-1/2” 1 lb
150......................................... $19.95 154......................................... $19.95
153......................................... $19.95

161 AT750-23 SAVE ON BUCKING BAR SETS!

Our 4 piece set comes with the following:
141, 142, 148, and 149
4PC...........................................$67.95
The 6 piece package has the following
bucking bars: 140, 141, 142, 147, 148,
and 149
6PC...........................................$95.95
The 11 piece package consists of each
of the following: 140, 141, 142, 147, 148,
8”x3”x1-1/2” 1.5 lbs 149, 150, 153, 154 161 and AT750-23.
4”x1”x2” 1.75 lbs
AT750-23................................. $19.95 11PC..................................... $165.95
161......................................... $19.95

800-248-0638 AIRCRAFT TOOL SUPPLY www.aircraft-tool.com 21

 RIVETING EQUIPMENT
STANDARD .401” RIVET SETS 10° OFFSET .401” SHANK RIVET SETS

STRAIGHT .401” SHANK RIVET SETS

PART LEN (L) DIAMETERS AVAILABLE PRICE

UNIVERSAL HEAD (AN470)
0470-3 3-1/2” 3/32, 1/8, 5/32, 3/16, 1/4” $8.95
0470-5 5-1/2” 3/32, 1/8, 5/32, 3/16, 1/4 $9.95
0470-7 7-1/2” 3/32, 1/8, 5/32, 3/16,1/4 $10.95
Note: To order, please specify the part number and the diameter. 0470-10 10-1/2 3/32, 1/8, 5/32, 3/16,1/4 $14.95
Example: to order a 3-1/2” long 1/8” diameter Universal Head set, the
number would be 470-3-1/8. MODIFIED BRAZIER (AN456)
PART LEN (L) DIAMETERS AVAILABLE PRICE 0456-3 3-1/2” 3/32, 1/8, 5/32, 3/16,1/4 $12.95
0456-5 5-1/2” 3/32, 1/8, 5/32, 3/16,1/4 $13.95
UNIVERSAL HEAD (AN470) 0456-7 7-1/2” 3/32, 1/8, 5/32, 3/16,1/4 $15.95
470-2 2-1/2” 3/32, 1/8, 5/32, 3/16, 1/4 $7.95 0456-10 10-1/2” 3/32, 1/8, 5/32, 3/16,1/4 $20.95
470-3 3-1/2” 3/32, 1/8, 5/32, 3/16, 7/32,1/4” $6.95
BRAZIER HEAD (AN455)
470-5 5-1/2” 3/32, 1/8, 5/32, 3/16, 1/4 $7.95
470-7 7-1/2” 3/32, 1/8, 5/32, 3/16,1/4 $8.95 0455-3 3-1/2” 3/32, 1/8, 5/32, 3/16,1/4 $12.95
470-10 10-1/2 3/32, 1/8, 5/32, 3/16,1/4 $12.95 0455-5 5-1/2” 3/32, 1/8, 5/32, 3/16,1/4 $13.95
0455-7 7-1/2” 3/32, 1/8, 5/32, 3/16,1/4 $15.95
MODIFIED BRAZIER (AN456) 0455-10 10-1/2” 3/32, 1/8, 5/32, 3/16,1/4 $20.95
456-2 2-1/2” 3/32, 1/8, 5/32, 3/16,1/4 $11.95
FLAT HEAD (AN442)
456-3 3-1/2” 3/32, 1/8, 5/32, 3/16,1/4 $11.95
456-5 5-1/2” 3/32, 1/8, 5/32, 3/16,1/4 $13.95 0442-3 3-1/2” 3/32, 1/8, 5/32, 3/16,1/4 $12.95
456-7 7-1/2” 3/32, 1/8, 5/32, 3/16,1/4 $14.95 0442-5 5-1/2” 3/32, 1/8, 5/32, 3/16,1/4 $13.95
456-10 10-1/2” 3/32, 1/8, 5/32, 3/16,1/4 $19.95 0442-7 7-1/2” 3/32, 1/8, 5/32, 3/16,1/4 $15.95
0442-10 10-1/2” 3/32, 1/8, 5/32, 3/16,1/4 $20.95
BRAZIER HEAD (AN455)
BUTTON HEAD (AN435)
455-2 2-1/2” 3/32, 1/8, 5/32, 3/16,1/4 $8.95
455-3 3-1/2” 3/32, 1/8, 5/32, 3/16,1/4 $12.95 0435-3 3-1/2” 3/32, 1/8, 5/32, 3/16,1/4 $12.95
455-5 5-1/2” 3/32, 1/8, 5/32, 3/16,1/4 $13.95 0435-5 5-1/2” 3/32, 1/8, 5/32, 3/16,1/4 $13.95
455-7 7-1/2” 3/32, 1/8, 5/32, 3/16,1/4 $13.95 0435-7 7-1/2” 3/32, 1/8, 5/32, 3/16,1/4 $15.95
455-10 10-1/2” 3/32, 1/8, 5/32, 3/16,1/4 $16.95 0435-10 10-1/2” 3/32, 1/8, 5/32, 3/16,1/4 $20.95

FLAT HEAD (AN442) ROUND HEAD (AN430)

442-2 2-1/2” 3/32, 1/8, 5/32, 3/16,1/4 $9.95 0430-3 3-1/2” 3/32, 1/8, 5/32, 3/16,1/4 $12.95
442-3 3-1/2” 3/32, 1/8, 5/32, 3/16,1/4 $9.95 0430-5 5-1/2” 3/32, 1/8, 5/32, 3/16,1/4 $11.95
442-5 5-1/2” 3/32, 1/8, 5/32, 3/16,1/4 $11.95 0430-7 7-1/2” 3/32, 1/8, 5/32, 3/16,1/4 $15.95
442-7 7-1/2” 3/32, 1/8, 5/32, 3/16,1/4 $10.95 0430-10 10-1/2” 3/32, 1/8, 5/32, 3/16,1/4 $20.95
442-10 10-1/2” 3/32, 1/8, 5/32, 3/16,1/4 $16.95
BUTTON HEAD (AN435)
435-2 2-1/2” 3/32, 1/8, 5/32, 3/16,1/4 $9.95
435-3 3-1/2” 3/32, 1/8, 5/32, 3/16,1/4 $9.95 FLUSH .401” SHANK RIVET SETS
435-5 5-1/2” 3/32, 1/8, 5/32, 3/16,1/4 $11.95
435-7 7-1/2” 3/32, 1/8, 5/32, 3/16,1/4 $13.95
435-10 10-1/2” 3/32, 1/8, 5/32, 3/16,1/4 $16.95
ROUND HEAD (AN430)
430-2 2-1/2” 3/32, 1/8, 5/32, 3/16,1/4 $9.95
430-3 3-1/2” 3/32, 1/8, 5/32, 3/16,1/4 $9.95
430-5 5-1/2” 3/32, 1/8, 5/32, 3/16,1/4 $11.95 PART LENGTH DIAMETER PRICE
430-7 7-1/2” 3/32, 1/8, 5/32, 3/16,1/4 $12.95 90 3-1/2” 1” Dia $12.95
430-10 10-1/2” 3/32, 1/8, 5/32, 3/16,1/4 $16.95 94 3-1/2” 1-1/4” Dia $14.95
95 5-1/2” 1-1/4” Dia $24.95
094 3-1/2” 1-1/4” Dia 10° offset $19.95
095 5-1/2” 1-1/4” Dia 10° offset $26.95

22 800-248-0638 AIRCRAFT TOOL SUPPLY www.aircraft-tool.com

 RIVETING EQUIPMENT
DOUBLE OFFSET .401” SHANK RIVET SETS STANDARD RIVET SET MIX

120
120A
Note: To order, please specify the part number and the diameter. Ex-
ample: to order a 7-1/2” long 1/4” diameter Flat Head set, the number
The 5 piece mix contains the following sizes Universal Head (AN470)
would be 1442-7-1/4. rivet sets: 3/32”, 1/8”, 5/32”, 3/16” and 1 flush set. Each rivet set is
3-1/2” long.
PART LEN (L) DIAMETERS AVAILABLE PRICE 120......................................(Standard)................................$29.95
120A................................. (Heavy Duty)..............................$31.95
UNIVERSAL HEAD (AN470)
1470-5 5-1/2” 3/32, 1/8, 5/32, 3/16, 1/4 $10.95
1470-7 7-1/2” 3/32, 1/8, 5/32, 3/16,1/4 $11.95 10 DEGREE OFFSET RIVET SET MIX
1470-10 10-1/2 3/32, 1/8, 5/32, 3/16,1/4 $12.95
MODIFIED BRAZIER (AN456)
1456-5 5-1/2” 3/32, 1/8, 5/32, 3/16,1/4 $20.95
1456-7 7-1/2” 3/32, 1/8, 5/32, 3/16,1/4 $21.95

BRAZIER HEAD (AN455)

1455-5 5-1/2” 3/32, 1/8, 5/32, 3/16 $20.95
1455-7 7-1/2” 3/32, 1/8, 5/32, 3/16 $21.95
The offset mix contains the following sizes Universal Head (AN470)
FLAT HEAD (AN442) rivet sets: 3/32”, 1/8”, 5/32”, and 3/16”. Each rivet set is 3-1/2” long.
1442-5 5-1/2” 3/32, 1/8, 5/32, 3/16,1/4 $14.95 121......................................................................................$29.95
1442-7 7-1/2” 3/32, 1/8, 5/32, 3/16,1/4 $21.95
BUTTON HEAD (AN435) EXTRA LONG RIVET SET MIX
1435-5 5-1/2” 3/32, 1/8, 5/32, 3/16,1/4 $20.95
1435-7 7-1/2” 3/32, 1/8, 5/32, 3/16,1/4 $21.95
ROUND HEAD (AN430)
1430-5 5-1/2” 3/32, 1/8, 5/32, 3/16,1/4 $20.95
1430-7 7-1/2” 3/32, 1/8, 5/32, 3/16,1/4 $21.95

The extra long mix contains the following 4 sizes Universal Head
(AN470) rivet sets: 3/32”, 1/8”, 5/32”, and 3/16”. Each long rivet set
7 1/2” GOOSENECK .401” SHANK RIVET SETS is 5-1/2” long.
125......................................................................................$29.95

AN450 SEMI-TUBULAR RIVET SETS

PART CUPPING DIAMETERS PRICE

5470 AN470 3/32, 1/8, 5/32, 3/16 $29.95
5456 AN456 3/32, 1/8, 5/32, 3/16 $59.95 PART LENGTH DIAMETER PRICE
5455 AN455 3/32, 1/8, 5/32, 3/16 $59.95 SM10-4503 3 1/2” 3/32” $25.95
SM10-4504 3 1/2” 1/8” $25.95
5442 AN442 3/32, 1/8, 5/32, 3/16 $59.95
SM10-4505 3 1/2” 5/32” $25.95
5435 AN435 3/32, 1/8, 5/32, 3/16 $59.95 SM10-4506 3 1/2” 3/16” $25.95
5430 AN430 3/32, 1/8, 5/32, 3/16 $59.95 SM10-4508 3 1/2” 1/4” $24.95

800-248-0638 AIRCRAFT TOOL SUPPLY www.aircraft-tool.com 23

 RIVETING EQUIPMENT
BACK RIVET SET SWIVEL RUBBER GUARD FLUSH RIVET SET

2470 AE4595

Superior for back riveting flush rivets without damage to the skin sur-
face. Spring loaded plastic guard holds down skin while riveting.
Safety flush rivet set makes it virtually impossible to damage or
Can also be used for “straight” riveting. .401 shank.
“smile” the skin while flush riveting. Rubber outer guard cushions the
2470................................... (ATS Brand)...............................$21.95 outer edge of the set while limiting recoil. Swivel head will move
AE4595..............................(Avery Brand).............................$32.95 through 20 degrees to keep the face of the set flush against the
head of the rivet which minimizes mis-setting the rivet. Finally, the
safety spring keeps the set securely attached to the rivet gun to
EXTENDED BACK RIVET SETS prevent accidental “bullets”.
AT106A................................................................................$57.95

2470-12
SWIVEL FLUSH RIVET SET

2470-12D The swiveling face of this rivet set will

keep it flush against the head of the
These extended versions of our 2470 Back Rivet Sets are great to get rivet even if you are a little off angle
into confined areas. They are especially useful to RV-10 builders who reducing the chance of “smiling” the
must back rivet some areas of the fuselage. 12” long, .401 shank. sheet metal or mis-setting the rivet.
2470-12............................(12” Straight)..............................$27.95 The 1-1/4” face is highly polished and
slightly mushroomed to keep it against the head of the rivet and off
2470-12D..................... (12” Double Offset).........................$29.95
the sheet metal. Fits into any .401 shank rivet gun.
181......................................................................................$20.95
BACK RIVETING PLATE

RUBBER GUARD FLUSH RIVET SET

Flush rivet set with a rubber boot to

prevent damage to metal surfaces
Back riveting requires a hard flat surface to act as a bucking bar while riveting. Fits any .401 rivet gun.
while you set the shop head of the rivet. This low carbon steel plate
has a flat ground surfaces to help you accomplish the task with
minimal effort. 3/8” thick X 4” wide X 15” long.
12A..................................... (3/4” Dia.)................................$14.95
AE1065................................................................................$71.95 12C....................................(1-1/2” Dia.)..............................$21.95

HIGH SHEAR RIVET PUNCH

Uses a standard .401 rivet RIVET SET EXTENSION

gun to remove High Shear
and Huck rivets. Each
punch is 3-3/8” long. This rivet set extension has a standard
.401 shank. Use with other standard
.401 rivet sets for added reach. 8”
PART SIZE PRICE PART SIZE PRICE overall length.
RP-1/8 1/8” $18.95 RP-1/4 1/4” $19.95
RP-5/32 5/32” $18.95 RP-5/16 5/16” $19.95
RP-3/16 3/16” $18.95 RP-3/8 3/8” $18.95
128A...................................................................................$24.95

24 800-248-0638 AIRCRAFT TOOL SUPPLY www.aircraft-tool.com

 RIVETING EQUIPMENT

BENCH MOUNTED DIMPLING/RIVETING TOOL

Lifetime Warranty

The deep 22-1/2” reach and 4” clearance

height of this tool makes it a favorite of home
builders and repair specialists. It’s manufac-
tured from heavy duty steel and finished with
Reach!
22-1/2” x 4” a rock hard powder-coated enamel for du-
rability and great looks. The precision ground
rivet shaft and fitted bronze bushing guaran-
tees a silky smooth operation. And the au-
tomatic spring-return feature will make your
work easier. Uses dimple and die or rivet sets
with a .187” shank. Comes complete with an
extension shaft and die holder block. Design
extends throat to a 22-1/2” reach for RV and
other kit builders.

204RV.................................................................................................................................................................................$215.95

3M RIVETERS TAPE BRASS, ALUMINUM AND NYLON PEENS

Riveters tape saves you time when
doing those large riveting jobs by
securely holding each rivet in place
until you are ready to buck it. Rivets BRASS
ALUMINUM
are fully visible through the transpar-
ent center window. Leaves no resi-
due upon separation.
685-1.........................(3/4” Wide x 36 Yards).......................$15.95
685-2.......................... (1” Wide x 36 Yards)........................$17.95 NYLON

RIVET FAN SPACING TOOL Peens are great for driving pins, knocking out old rivets, removing
This tool is just what you dents, nudging things into place, and shaping sheet metal. Select
need for lining up those a peen head with a material that is softer than the object you in-
rivet holes. The clever ac- tend to drive to prevent marring. Screw-in heads are made of solid
cordion action of the fan brass, aluminum, or nylon and are interchangeable between body
spacer allows you to set lengths. 1-1/4” diameter. Fits .401” rivet guns and air hammers.
up rivet holes with deadly
accuracy. Simply expand or contract the tool to get the spacing PART PEEN MATERIAL LENGTH PRICE
you’re looking for and start laying out your holes. It just doesn’t get
ATS107A-3B Brass 3” $19.95
any easier than this.
ATS107A-5B Brass 5” $21.95
FS01.............................. (Standard Spacer)..........................$37.95 ATS107A-7B Brass 7” $25.95
FS02..................................(Mini Spacer)..............................$29.95 ATS107A-3A Aluminum 3” $19.95
ATS107A-5A Aluminum 5” $21.95
ECONOMY BRASS PEEN ATS107A-7A Aluminum 7” $25.95

A great tool for driving pins or re- ATS107A-3N Nylon 3” $19.95

moving small dents. Solid brass ATS107A-5N Nylon 5” $21.95
head will not damage steel sur- ATS107A-7N Nylon 7” $25.95
faces. 3” long by 3/4” diameter. ATS107-B Replacement Brass Head $9.95
Head is non-removable. ATS107-N Replacement Nylon Head $9.95
ATS107-A Replacement Aluminum Head $9.95
BP03......................................................................................$8.95

800-248-0638 AIRCRAFT TOOL SUPPLY www.aircraft-tool.com 25

 RIVETING EQUIPMENT
AVERY RIVET SQUEEZER SET ASSORTMENT VISE® GRIP DIMPLER

Made for dimpling in restricted and hard to reach places where reg-
ular dimple dies won’t fit. With 7” Vise Grip® plier. Machined tool steel
dimple dies are T.I.G. welded to the Vise Grip jaws then polished.
An assortment of dimple dies and rivet sets. Manufactured by Avery Tools.
AE1200450............................ (21 pc)................................ $229.95 AE550.....................................(3/32”)...................................$48.95
AE1200555............................. (8 pc)...................................$69.95 AE552......................................(1/8”)....................................$48.95
AE1200560............................. (6 pc)................................. $119.95
AE1200565.....................(6 pc Screw Size)......................... $119.95
AE1720...........................(3/8” X 1/16” Set).............................$7.95 SCREW DIMPLERS
AE1721............................(3/8” X 1/8” Set)..............................$7.95
AE1723............................(3/8” X 1/4” Set)..............................$7.95
AE1725............................(3/8” X 3/8” Set)..............................$7.95
AE1727............................(3/8” X 1/2” Set)..............................$7.95

AVERY POP DIMPLERS

A dimpling tool similar to our pop rivet dimplers, but these use an
This pop rivet dimpler is for allen screw to apply the dimpling force. Each size comes with a
dimpling in hard to reach male and female die, allen screws and nuts and an allen wrench.
places. Works with any hand
PART SCREW SIZE PRICE
pop rivet tool. Can be used
over & over. Works for both AE1025 6 Screw $27.95
100 & 120 pop rivets. AE1026 8 Screw $25.95
AE1027 10 Screw $25.95

AE1022................................(3/32” Dia)................................$25.95
AVERY SPRING BACK DIMPLE DIE SETS
AE1024.................................(1/8” Dia).................................$25.95

DIE SETS FOR SETTING BRAKE RIVETS

Spring back dimple dies are precision CNC machined from aircraft
quality heat treatable stainless steel & heat treated to Rockwell
C42/46. Spring back angles on both dies make a superior dimple.
Working surfaces are polished to a satin finish & sharp edges are
Use your hand or pneumatic squeezer to set Cleveland brake riv- radii. Manufactured by Avery Tools.
ets when re-lining your brake pads. Includes (2) sets with .187” dia.
PART SIZE PRICE PART SIZE PRICE
shank. All you need is a 3/16” drill bit, a small socket, a small pin
punch and a hammer. Can also be used to install 1/8” countersunk AEDDS-3 3/32” $40.95 AE6DDS AN6 Screw $38.95
tubular rivets. AEDDS-4 1/8” $40.95 AE8DDS AN8 Screw $38.95
AE4625................................................................................ $35.95 AEDDS-5 5/32” $40.95 AE10DDS AN10 Screw $38.95

26 800-248-0638 AIRCRAFT TOOL SUPPLY www.aircraft-tool.com

 RIVETING EQUIPMENT
FUEL TANK DIMPLE DIE SET 3/32 SPRING BACK DIMPLE DIES
The unique shape of a spring
Use this dimple die set on back dimple die’s face pushes
fuel tanks. 3/32” dimple dies. the metal up slightly before the
dimple is made, resulting in a
cleaner, more precise 100° dim-
ple. All dies are ½” in diameter
AE14875.............................................................................. $40.95 and 1/4” long with a .187” shank.

PART SIZE PRICE PART SIZE PRICE

AVEX RIVET DIMPLE DIE SET SB4263 3/32” $25.95 SB6 AN6 Screw $29.95
SB4264 1/8” $25.95 SB8 AN8 Screw $29.95
120 degree dimple die set is spe- SB4265 5/32” $25.95 SB10 AN10 Screw $29.95
cifically made for Avex Rivets.

AVERY RV-14 SQUEEZING SAFETY PIN

AE14877..................................(1/8”)....................................$39.95
AE14879.................................(5/32”)...................................$25.95

RV-14 MODIFIED 3/32” MALE DIE This tool is made specifically to rivet the
RV-14 elevator trailing edge, which un-
Male dimple die is modified for use in the like other RV kits has the last section of
RV-14 build. the trailing edge angled upwards by 4
degrees.
AE14-3/32............................................................................$15.95
AE14-1801...........................................................................$25.95

DIMPLE DIE SETS - 100° RIVET EDGE GAUGE

Maintenance standards
This product is a clever way to require that all rivet be no
set dimple in sheet metal using less than 2 diameters (2D)
a pop riveter. Just place both and no more than 4 diam-
halves on the sheet metal insert in eters (4D) from the edge
your riveter and squeeze to form of the sheet, with the opti-
a perfect dimple. mum distance being 2.5
5102D-3/32...........................................................................$8.95 diameters (2.5D). This tool
will accurately gauge the
5102D-1/8.............................................................................$8.95
distance of rivet holes from the edge of the sheet to verify that they
are within these standards.
HAND DIMPLING PLIERS MJ520.................................................................................$12.95

DIMPLE DIE BLOCK SETS

6187

Our dimpling pliers are produced from sturdy Vise Grip® Pliers which
allow you to clamp down with over 3,500 lbs. of force! This unit sports
a 1” reach and uses any standard dimple die with a .187 shank. Just
order one pair of pliers and three additional sets of dies and you will
have four tools in one! 4187

PART SIZE PRICE PART SIZE PRICE Set accepts any dimple die or rivet squeezer sets with a .187 shank.
7073 3/32” $35.95 707AN6 AN6 Screw $35.95 Shank portion can be used in a standard rivet gun or struck with a
7074 1/8” $35.95 707AN8 AN8 Screw $35.95 hammer.
7075 5/32” $35.95 707AN10 AN10 Screw $35.95 4187....................................................................................$18.95
7076 3/16” $35.95
6187............................. (Corner Block Unit).........................$18.95

800-248-0638 AIRCRAFT TOOL SUPPLY www.aircraft-tool.com 27

 RIVETING EQUIPMENT
DIMPLE DIES AND PUNCHES RIVET SQUEEZER SETS

470X SERIES 4710 SERIES

426DD-KIT
426XP PUNCH 426XD DIE
(MALE) (FEMALE)
3456-X
200-X SERIES 200-450X SERIES
Standard .187 shank. For AN426 series rivets (100 degrees countersink).

BODY LENGTH (L) UNIVERSAL RIVETS (AN470) STANDARD .187 SHANK

PART SIZE M/F PRICE
1/8” 1/4” 3/8” 1/2” DIA BODY LENGTH (L)
PART RIVET SIZE PRICE
(D) 1/8” 1/4” 3/8” 1/2”
4263DP-2 3/32 M&F -1* -2 -3 -4 $17.95
4264DP-2 1/8 M&F -1* -2 -3 -4 $17.95 4703-2 1/2” 3/32 -1 -2 -3 -4 $6.95
4265DP-2 5/32 M&F -1* -2** -3 -4 $17.95 4704-2 1/2” 1/8 -1 -2 -3 -4 $6.95
3/16 M&F -1* -2** -3 -4 4705-2 1/2” 5/32 -1 -2 -3 -4
4266DP-2 $17.95 $6.95
6 Screw M&F -2 -3 4706-2 1/2” 3/16 -1 -2 -3 -4
4506DP-2 8 Screw M&F -2 -3
$22.95 $6.95
4710-2 1/2” Flush -1 -2 -3 -4
4508DP-2 10 Screw M&F -2 -3 $22.95 $6.95
4510DP-2 $22.95
6 piece
426DD-KIT 3/32-3/16 M&F -2 $65.95 set:
3/32 to
*Note: these sets consist of a -2 die (F) and a -1 punch (M). 3456-2 1/2” -1 -2 -3 -4 $29.95
3/16
**Note: these sets consist of a -3 die (F) and a -2 punch (M). plus 2
flush
3710-2 3/8” Flush -1 -2 -3 -4 $6.95
SEMI-TUBULAR RIVETS (AN450) STANDARD .187 SHANK
RIVET SQUEEZER/DIMPLE DIE MIX
OVAL FLARE
PART SIZE PRICE PART SIZE PRICE
200-2 1/16” $17.95 200-4502 1/16” $20.95
200-3 3/32” $16.95 200-4503 3/32” $20.95
200-4 1/8” $17.95 200-4504 1/8” $19.95
200-5 5/32” $17.95 200-4505 5/32” $20.95
200-6 3/16 $16.95 200-4506 3/16” $26.95
200-8 1/4” $16.95 200-4508 1/4” $20.95

DIMPLE DIE AND SQUEEZER SET HOLDER

Designed to securely
hold up to 25 dimple
A complete set of rivet squeezers and dimple dies for AN470 and dies and rivet squeezer
Flush riveting. 17 piece set. sets. Made of high im-
pact plastic. Size is 4” x
PART DESCRIPTION QTY PART DESCRIPTION QTY 4” x 5/8” 25 holes.
4703-2 3/32” Squeezer Set 1 4263DP-2 3/32” Dimple Die 1
4704-2 1/8” Squeezer Set 1 4264DP-2 1/8” Dimple Die 1
4705-2 5/32” Squeezer Set 1 4265DP-2 5/32” Dimple Die 1
4706-2 3/16” Squeezer Set 1 4266DP-2 3/16” Dimple Die 1
4710-2 Flush Set (1/2”) 2 06785 Set Holder 1
3710-2 Flush Set (3/8”) 2 3456-B.................................. (6 Holes)...................................$3.95
06785D................................ (8 Holes)...................................$4.95
SKT17................................................................................ $119.95
06785.................................. (25 Holes)................................$11.95

28 800-248-0638 AIRCRAFT TOOL SUPPLY www.aircraft-tool.com

 RIVET SQUEEZERS
PNEUMATIC BENCH MODEL RIVET SQUEEZERS

0214-30C-C120B 0214-60C-C120B

All units come equipped with an adjustable lower set holder, bench mounting brackets, and
BENCH MOUNT UNITS COME hoses. Accepts all squeezer sets with a .187” shank. Available in a variety of yokes and power
WITH FOOT CONTROL units. Made in U.S.A.

RIVET YOKE YOKE

PART FORCE PRICE
CAP. REACH GAP
0214-30C-C60B Single 1/8” 6” 3-1/2” $1,627.95
0214-30C-C120B Single 1/8” 12” 4” $3,097.95
0214-60C-C60B Double 3/16” 6” 3-1/2” $2,199.95
0214-60C-C90B Double 3/16” 9” 3-1/2” $2,695.95

RIVET SQUEEZER BENCH MOUNT RIVET SPACER SHIM KIT

Spacer shims are used with Compression Riveters to
produce a precise rivet gap spacing. This kit con-
tains 2 each of the following shim sizes: 1/64”, 1/32”,
and 1/16”. With it you will be able to make 1/64” ad-
justments in a range of 1/64” to 7/32”.

SMS-012K..............................................................................$8.95

ADJUSTABLE SET HOLDER

FOR PNEUMATIC SQUEEZER

This adjustable set holder will eliminate the need to shim

Adapt your pneumatic “C” rivet squeezers for bench use. Machined the dies and sets with shim washers. Adjustments are fast-
steel bracket mounts to your bench permanently while allowing you er and easier. Note: Only for yokes with 1” thick base or
to easily install or remove the riveter. The unique design clamps any less. Does not work for tandem units.
yoke in any position from straight to tilted back 90 degrees. Works
with all (9/16” thick) pneumatic squeezer yokes. AE274................................(Avery Brand).............................$82.95
AE7698................................................................................$71.95 214CAR.............................. (ATS Brand)...............................$49.95

800-248-0638 AIRCRAFT TOOL SUPPLY www.aircraft-tool.com 29

 RIVET SQUEEZERS
ATS PNEUMATIC “C” SQUEEZER

Lifetime Warranty

SINGLE FORCE DOUBLE FORCE

ATS-114CK ATS-214CK

The “C” squeezer is by far the most popular pneumatic type riveter. They are also the most versatile. With a wide array of yokes to choose
from, there is practically no riveting job they cannot take on. That’s why we decided to create our own version of this popular squeezer. Our
new ATS “C” Squeezer is lightweight and has the same power as the Chicago Pneumatic 0214-C squeezer on which it is based. It accepts
the same yokes and attachments and is powerful enough to squeeze up to 1/8” solid aluminum, or 3/32” solid steel rivets (single force), or
up to 3/16” aluminum and 1/8” steel rivets (double force). And we’ve combined our new riveter with a Longeron yoke, and our best-selling
17-piece squeezer/dimpler set to provide you with a value package that’s hard to beat.

SINGLE FORCE (1/8” MAX) DOUBLE FORCE (3/16” MAX)

DESCRIPTION
PART NUMBER PRICE PART NUMBER PRICE
Complete kit with Rivet Squeezer, 1-1/2” yoke, Longeron yoke and
ATS-114CK $699.95 ATS-214CK $859.95
Dimple and Squeezer sets
Rivet Squeezer only with 1-1/2” yoke ATS-114C-15 $519.95 ATS-214C-15 $689.95
Rivet Squeezer only with 3” yoke ATS-114C-30 $539.95 ATS-214C-30 $709.95

“C” SQUEEZER YOKES

A =DEPTH LONGERON
B =HEIGHT

A =2.5”, B =1.25” A =1.0”, B =1.0” A =1.19”, B =1.25” A =2.5”, B =1.375”

14-10....... $105.95 14-1........... $68.95 14-2........... $69.95 14-5......... $125.95

A =2”, B =1.25” A =3.0”, B =1.375” A =5.625”, B =1.25” A =1.5”, B =1.25” A =2.75”, B =1.25” A =3.875”, B =1.25”
14-4......... $105.95 14-7......... $135.95 14-9......... $155.95 14-3........... $69.95 14-6......... $125.95 14-8......... $145.95

30 800-248-0638 AIRCRAFT TOOL SUPPLY www.aircraft-tool.com

 RIVET SQUEEZERS
ATS PNEUMATIC ALLIGATOR SQUEEZER

Lifetime Warranty

SINGLE FORCE DOUBLE FORCE

ATS-114AK ATS-214AK

The new ATS Alligator Squeezer is a lightweight, compact, and powerful riveter modeled after the industry standard Chicago Pneumatic
0214-A squeezer. It accepts the same attachments and jaws designed for that unit. The single piston version delivers 3.000 lbs of force to
squeeze up to 1/8” solid aluminum, or 3/32” solid steel rivets. And the tandem model uses a double piston arrangement to deliver up to
6,000 pounds of force to squeeze up to 3/16” aluminum, or 1/8” steel rivets. This is a riveter that will easily fit most of your riveting needs with-
out breaking your budget. Want even more savings? Get the complete riveting kit, which contains the alligator squeezer, plus our 17-piece
squeezer/dimpler set priced at a substantial discount.

SINGLE FORCE (1/8” MAX) DOUBLE FORCE (3/16” MAX)

DESCRIPTION
PART NUMBER PRICE PART NUMBER PRICE
Complete kit with Alligator Squeezer, 1-1/2” jaws, and Dimple and
ATS-114AK $669.95 ATS-214AK $749.95
Squeezer sets
Alligator Squeezer only with 1-1/2” jaws ATS-114A-15 $599.95 ATS-214A-15 $659.95
Alligator Squeezer only with 3” jaws ATS-114A-30 $769.95 ATS-214A-30 $899.95

PNEUMATIC ALLIGATOR COMPRESSION RIVETERS

Alligator “A” Riveters are designed to be used in areas not ac-

cessible by other riveting methods. Our riveters are completely
interchangeable with Chicago Pneumatic Squeezers. All Rivet-
ers will accept any Squeezer Set with .187” shank.

A214-60 Series

FORCE
PART CAPACITY REACH PRICE
(LBS)
A214-60-A15 6000 3/16” 1-1/2” $821.95
A214-60-A22 4600 5/32” 2-1/4” $861.95
A214-60-A30 3400 1/8” 3” $885.95

More options available online at www.aircraft-tool.com

800-248-0638 AIRCRAFT TOOL SUPPLY www.aircraft-tool.com 31

 RIVET SQUEEZERS
ATS PROFESSIONAL SWIVEL HAND RIVET SQUEEZER

Lifetime Warranty

RS-BK 5022-3A
This is our most popular rivet squeezer, and our customers love it because its heavy duty design will hold up to even the most brutal punish-
ment. The handles are formed from .060” thick cold-rolled steel tubing that resists bending, even under heavy pressure. The ram assembly
is engineered to operate smoothly while delivering the maximum possible leverage without breaking - in fact, our ram assembly has been
tested to 6,000 lbs without any indication of failure! And finally, the yoke head is precisely CNC machined from solid steel and case-hard-
ened for extra toughness. We made this squeezer to last a lifetime, and our Ats Pro Lifetime warranty guarantees it!
5011-1A.........................................................................(Squeezer with 1-1/2” Yoke)..................................................................... $145.95
5022-3A............................................................................(Squeezer with 3” Yoke)........................................................................ $155.95
RS1009A-1...................................................................... (Replacement 1-1/2” Yoke)........................................................................ $65.95
RS1008A-3.........................................................................(Replacement 3’’ Yoke).......................................................................... $75.95
RS-BK....................................................................................(Bench Mount Only)............................................................................. $58.95

ATS ECONOMY RIVET SQUEEZER KIT

Our ATS Series Rivet Squeezer will safely squeeze alumi-
num rivets up to 5/32” in diameter (up to 1/8” steel riv-
ets). The unibody handles are forged from a single bil-
let of steel and precisely machined. This makes them
extremely strong and resistant to breakage. The yoke is
made of the highest quality tool steel and hardened to
resist flex under stress. An adjustable ram eliminates the
need for shims.
This popular economy rivet squeezer kit is ideally suited
for the home builder or the occasional user. It features
our ATSRS economy rivet squeezer with a selection of 3
yokes in sizes 1, 2, and 3 inches. We’ve also thrown in
our 6 Piece Squeezer Set, and a set of Rivet Gauges to
help you get the job done right. Our ATS Rivet Squeez-
er will easily squeeze rivets up to 5/32” diameter. The
yokes are made of tool steel and hardened to resist
ATSRS-KIT
flex. Adjustable ram eliminates the need for shims.
ATSRS-KIT..................................................................................(Complete Kit)............................................................................... $179.95
ATSRS-1............................................................................. (1” Rivet Squeezer Only).......................................................................... $92.95
ATSRS-3............................................................................. (3” Rivet Squeezer Only)........................................................................ $100.95
ATSRS-1Y....................................................................................... (1” Yoke)...................................................................................... $29.95
ATSRS-2Y....................................................................................... (2” Yoke)...................................................................................... $39.95
ATSRS-3Y....................................................................................... (3” Yoke)...................................................................................... $43.95

32 800-248-0638 AIRCRAFT TOOL SUPPLY www.aircraft-tool.com

 RIVET SQUEEZERS
DELUXE HAND/BENCH RIVET SQUEEZER KIT

Lifetime Warranty

The ATS Hand/Bench Rivet Squeezer Kit gives you

the best of both worlds. It’s a hand squeezer that
converts to a free-standing bench squeezer in un-
der 10 seconds! To make sure you can handle any Swivels a full 360°
riveting job, we included a 3” yoke in addition to our to rivet from any
1 1/2” squeezer. You’ll also get the bench mount- Scan to view direction!
video
ing kit and our 17 piece squeezer and dimple die
assortment set (SKT17).

5022-DX...................................................................................(Complete Kit)............................................................................... $349.95

SPECIALTY YOKES

RS1005A RS1007A RS1006A RS1004A

Our specialty yokes adds even more versatility to our popular 5022-DX, 5022, and 5011 Rivet Squeezers. Each yoke is heat treated and
precision CNC machined in Michigan. Gap height 1 1/4”.
RS1004A............................................................................ (2 1/2” Longeron Yoke)...............................................................$95.95
RS1005A.............................................................................(4” Deep Reach Yoke)...............................................................$99.95
RS1006A.........................................................................(1 1/2” Close Quarter Yoke)...........................................................$75.95
RS1007A............................................................................(3” Close Quarter Yoke)..............................................................$79.95

800-248-0638 AIRCRAFT TOOL SUPPLY www.aircraft-tool.com 33

 RIVET SQUEEZERS
ATS SUPER DUTY RIVET SQUEEZER KIT

Lifetime Warranty

This top model of our exclusive ATS squeezer line is built for hard use, making it a perfect
shop addition. The super duty squeezer is constructed out of stainless steel and the unique
unibody styling is drop forged giving it extra strength and CNC machined to tight tolerances.
The stainless steel yokes are specially engineered to be half the weight of other yokes, but
maintains it’s full strength. Our Pro squeezer has an adjustable ram, eliminating the need for
shims. This squeezer will work on rivets up to 5/32” aluminum (1/8” steel), and will accept any
rivet sets and dimple dies with a standard 3/16” (.187) shank. We guarantee this Pro Super
Duty squeezer will last a lifetime, and back it with our ATS Lifetime Warranty.
Our money-saving kit contains everything you’ll need to tackle any riveting job. You get
our popular ATSRS-3SD 3” Rivet Squeezer, an extra 1.5” yoke, our 17 Piece Dimple Die and
Squeezer Set, a Rivet Length Gauge, and a Shop Head Rivet Gauge to help you get the job
done right.
SDRS-KIT..................................................... (Complete Kit)..................................$279.95
ATSRS-1SD...............................................(1.5” Squeezer Only).............................$115.95
ATSRS-3SD................................................ (3” Squeezer Only)...............................$130.95
ATSRS-1SDY.................................................... (1.5” Yoke).......................................$39.95
ATSRS-3SDY...................................................... (3” Yoke)........................................$52.95
DIMPLE DIE AND SQUEEZER SET
We back everything we sell with the
A collection of squeezer sets and Ultimate Aircraft Guarantee!
dimple dies.
• A Pro Life Time Warranty • An experienced staff to an-
that cant be beat. swer your tough questions.
SKT17.................................. (17 Piece).............................. $119.95 • Unmatched Customer • 30 Day money back guar-
3456-2.......................(6 Piece Squeezer Set)......................$29.95 Service. antee.
426DD-KIT...................(9 Piece Dimple Die)........................$65.95

34 800-248-0638 AIRCRAFT TOOL SUPPLY www.aircraft-tool.com

 POWER RIVETERS
CHERRY® POWER RIVETERS
Note: Pulling heads are not furnished with Riveters and must be purchased separately.

G704B CHERRYMAX® POWER RIVETER G784 CHERRYLOCK® HYDRO-SHIFT RIVETER

This tool utilizes straight, offset and right-angle pulling heads, all of
It will install nearly all diameters of CherryLOCK® Rivets up to a half-
which can install -4, -5, and -6 diameter CherryMAX® rivets in all
inch grip. It can be operated in any position with one hand. With
head styles, materials and grip lengths. Specifications: 90 to 110 PSI
proper adapters and pulling heads, this tool will install other types of
(6.2 to 7.6 bar) operating pressure; 3100 lbs (13.79 kN) pulling force
rivets including CherryMAX® Rivets. Specifications: 90 to 110 PSI (6.2
at 90 psi (6.2 bar); .510” (12.954mm) stroke length; 4.25 lbs (1.93
to 7.6 bar) operating pressure; 2600 lbs (11.57 kN) pulling force at
kg) weight.
90 psi (6.2 bar); .875” (22.2mm) stroke length; 8 lbs (3.63 kg) weight.
See the Power Riveter section of this catalog for the following recom-
mended Nosepieces: H701B-456 Straight, H753-456 Right Angle, and See the Power Riveter section of this catalog for the following recom-
H781-456 Offset for CherryMAX®. mended Nosepieces: H681-3C, -4C, -5C, and -6C for CherryLOCK®;
H680B200A and 744-300 adapter for CherryMAX®.
G704B......................(NSN 5130-01-044-7207)................ $1,183.95
G784........................(NSN 5130-00-935-4681)................ $4,195.95
GBP704F.............................(GBP Brand).......................... $1,144.95
GBP784B.............................(GBP Brand).......................... $3,198.95

G747 CHERRYMAX® POWER RIVETER

G83 CHERRY LOCKBOLT POWER RIVETER

This tool utilizes straight, offset and right-angle pulling heads, all of This a heavy duty production tool designed for high speed, reliable
which can install -4, -5, and -6 diameter CherryMAX® bulb type installation of the most popular sizes of aircraft lockbolts. It can be
rivets in all head styles, materials and grip lengths. Specifications: operated in any position with one hand. This tool can also be used
90 to 110 PSI (6.2 to 7.6 bar) operating pressure; 2100 lbs (9.34 kN) to install blind bolts and blind rivets. Specifications: 90 to 110 PSI (6.2
pulling force at 90 psi (6.2 bar); .437” (11.1 mm) stroke length; 3.5 to 7.6 bar) operating pressure; 3750 lbs (16.7 kN) pulling force at 90
lbs (1.59 kg) weight. psi (6.2 bar), 800 lbs (3.56 kN) on return stroke; .438” (11.1mm) stroke
See the Power Riveter section of this catalog for the following recom- length; 4.95 lbs (2.25 kg) weight.
mended Nosepieces: H701B-456 Straight, H753-456 Right Angle, and See the Power Riveter section of this catalog for the following recom-
H781-456 Offset for CherryMAX®. mended Nosepieces: H701B-456 for CherryMAX®.
G747.............................................................................. $1,157.95 G83A........................(NSN 5130-01-435-3507)................ $1,872.95

800-248-0638 AIRCRAFT TOOL SUPPLY www.aircraft-tool.com 35

 POWER RIVETERS
G84 LOCKBOLT POWER RIVETER RIGHT ANGLE CHERRYMAX PULLING HEAD

A right angle nosepiece

pulls at 90° to the normal
pulling axis of the riveter.
They are used in restrict-
ed areas, or when pull-
ing from around a cor-
• Stroke: 9/16” ner. The H753-456 has a
• Pulling Force: 5, 750 head clearance of 2-1/4”, and an overall length of 5-7/16”. Pulls all
lbs (2,608 kgs) nominal and oversize Cherrymax® rivets from 1/8” (-4) to 3/16” (-6).
Works with the following riveters: GBP model GBP704, Cherry Textron
models G747, G704B, and G746A.
H753-456.......................................................................... $787.95

BLIND BOLT PULLING HEADS

The G84 pneumatic-hydraulic tool is a heavy-duty production tool

designed for high speed, reliable installation of the most popular These pulling heads will fit Cherry G83 and G84 Riveters and al-
sizes of aircraft Lockbolts. Its durable, all metal housing makes this low you to pull Cherry MaxiBolt®, Huck A286, MS90353, MS90354,
tool ideal for use in rugged shop environments. MS21140, and MS21141 Blind Bolts. The Cherry® and Huck® Pulling
Heads shown below are compatible for a given size, and may be
G84................................................................................ $1,885.95 used interchangeably with corresponding Huck or Cherry Riveters.
PART SIZE DESCRIPTION MFG PRICE
H83B-5MB Cherry $682.95
CHERRYLOCK PULLING HEADS -5 5/32” Pulling Head
99-2701 Huck $527.95
H83B-6MB Cherry $682.95
-6 3/16” Pulling Head
99-2707 Huck $566.95
H84C-8MB Cherry $915.95
-8 1/4” Pulling Head
99-2713 Huck $559.95
The H681 series pulling heads are used to install 2000 series Cher-
rylock® rivets. A separate pulling head is required for each diameter
and type of rivet. Fits GBP models GBP700 and GBP784, and Cherry
Textron models G700 and G784 riveters. STRAIGHT CHERRYMAX PULLING HEADS

PART SIZE PRICE

H681-3C 3/32” $549.95
H681-4C 1/8” $479.95
H681-5C 5/32” $479.95
H681-6C 3/16” $475.95 FIGURE A FIGURE B

A straight nosepiece is the preferred way to install Cherrymax® rivets

OFFSET CHERRYMAX PULLING HEAD if circumstances permit. Each nosepiece listed in the chart below
will pull all nominal and oversize Cherrymax® rivets from 1/8” (-4) to
Offset nosepieces are used 3/16” (-6).
to clear obstructions that
are in line with the normal FITS RIVETER
pulling axis of the riveter. PART FIG PRICE
CHERRY
This pulling head provides GBP MODEL
MODEL
an offset of 1-15/32”. Over-
all length is 4-3/8”. Pulls all nominal and oversize Cherrymax® riv- H701B-456 a GBP704 G704B, $153.95
ets from 1/8” (-4) to 3/16” (-6). Works with the following riveters: GBP H680B200A b GBP700, G700 $499.95
model GBP704, Cherry Textron models G747, G704B, and G746A 456MAX744-20 b GBP784 G700, G784 $409.95
08MAX744-20 b GBP744 G744 $419.95
H781-456.......................................................................... $550.95

36 800-248-0638 AIRCRAFT TOOL SUPPLY www.aircraft-tool.com

 BLIND RIVETERS
ATS AIR HYDRAULIC RIVETER KIT ATS 1/4” AIR HYDRAULIC RIVETER

• Pulls 3/32”, 1/8”, 5/32”,

and 3/16” rivets.
• Includes Stem Catcher
• 2300 lbs pulling force
• .63” Stroke length.

Accessory Kit Contains: An

assortment of 40 pop rivets • Pulling Force 3,500 lbs
in sizes 3/32”,1/8”, 5/32”, (1,603 Kg)
and 3/16”; 1 set replace- • Rivet Capacity 1/4” alumi-
ment o-rings and seals (1); num or mild steel
Oil Bottle; replacement • Stroke Length .55” (14 mm)
spring set (3); replacement • Nosepieces: 3/32” (2.4
valve pusher; replacement mm), 1/8” (3.2 mm), 5/32”
jaws and jaw case; wrench (4.0 mm), 3/16” (4.8 mm),
set; high impact molded 1/4” (6.4 mm)
case. • Full 1-year warranty

This heavy duty riveter is designed to take on any job from home
builts to production work. Features two level hydraulic system to de-
liver over 1ton pulling force, and has a long .63 inch stroke. Also
The newest addition to our air riveter line delivers a massive 3,500
features a built in stem deflector to keep work area clean.
lbs of force to effortlessly pull up to 1/4” aluminum and steel rivets.
ATS8805K..........................(Complete Kit)........................... $119.95 It’s made to the same quality standards as all of our other, aviation
ATS8806...................... (Heavy Duty Riveter)........................$95.95 grade riveters and comes with a full 1 year warranty. The complete
3047RP........................ (Replacement Jaws)........................$13.95 package contains the riveter, 2 jaw cases (light duty and heavy
ATS8806-SET......... (Replacement Nosepiece Set)................$10.95 duty), 4 nosepieces, a set of spanners, and a stem deflector for
added safety. Great for pulling Cherry, Avdel, and Pop rivets.
ATS8808.............................. (Unit Only).............................. $175.95

ATS EXTENDED REACH RIVETER WITH COLLECTOR

ATS HEAVY DUTY RIVETER WITH COLLECTOR

• Pulling Force 2400 lbs (1090 Kg)

• Rivet Capacity 3/16” aluminum or
mild steel
• Stroke Length .768” (19 mm)
• Built-in vacuum collection system
• Nosepieces: 3/32” (2.4 mm), 1/8”
(3.2 mm), 5/32” (4.0 mm)
• Weight 4.11 lbs (1.87 kg)

• Pulling Force 1,300 lbs (600 Kg)

• Rivet Capacity 5/32” aluminum or mild steel
• Stroke Length .63” (16 mm)
• Extended nose dimensions: 8.00” long x .635” diameter
This riveter is designed for high capacity work. Its short cycle time
• Nosepieces: 3/32” (2.4 mm), 1/8” (3.2 mm), 5/32” (4.0 mm)
and long stroke length makes easy work of pulling even the most
• Built-in vacuum collection system
challenging blind rivets. The ergonomic design which features rub-
• Weight 2.7 lbs (1.2 kg)
ber grip, and low force tripper mechanism means that you can use
This specialty riveter is for reaching into those really deep areas. it for hours without fatigue. A built in vacuum system will keep stems
Vacuum collection system keeps stems safely stowed in collector. contained in the collector, keeping the workspace free of debris.
ATS8814VE......................................................................... $275.95 ATS8821V........................................................................... $229.95

800-248-0638 AIRCRAFT TOOL SUPPLY www.aircraft-tool.com 37

 BLIND RIVETERS
ATS INLINE RIVETER WITH COLLECTOR HUCK® AIR POWERED RIVETER

This riveter gets you into some very tight spaces.

It’s unique in line configuration allows you to use
it to do construction or repairs through openings
such as inspection holes or wheel wells.
• Pulling Force 2400 lbs (1090 Kg)
• Rivet Capacity 3/16” aluminum or mild steel
• Stroke Length .768” (19 mm)
• Built-in vacuum collection system
• Nosepieces: 3/32” (2.4 mm), 1/8” (3.2 mm),
5/32” (4.0 mm)
• Weight 4.11 lbs (1.87 kg)

ATS8802V........................................................................... $249.95
ATS8802V-04................ (Replacement Jaws)...................... $249.95
The AK175A is the air powered counterpart to the HK150A. It is the
ATS MONOBOLT RIVETER most compact air-reciprocating hydraulic riveter on the market. It
With heavy duty jaws and a pulling will pull Cherrymax® rivets in 5/32” and 3/16” sizes. It will also pull
force of nearly 4,000 lbs, the new Pop® and Monobolt® rivets (Monobolt nosepieces are sold sepa-
ATS Monobolt Riveter will easily draw rately).
3/16” and 1/4” diameter rivets. Suit- AK175A............................................................................. $409.95
able for use with Avdel Monobolts® 202168..................(3/16’’ Monobolt Nosepiece).................$20.95
(27xx series), and Huck Magna- 202169...................(1/4” Monobolt Nosepiece)...................$20.95
Loks® (MGL and UMGL series).
3047RP............... (Replacement 2-Piece Jaw Set)...............$13.95
• Pulling Force 3,841 lbs (1,745 Kg) 202929...............(Replacement 3-Piece Jaws Set).............. $25.95
• Rivet Capacity 1/4” aluminum or
HKRN205....................(Rivnut Conversion Kit)....................$169.95
mild steel
• Heavy Duty Jaws
• Nosepieces: 3/16” (4.8 mm), 1/4”
(6.4 mm)
• Weight 3.85 lbs (1.75 kg) HUCK® HAND HYDRAULIC RIVETER
ATS8813............................................................................ $345.95

ATS HEAVY DUTY LOCKBOLT RIVETER

• Pulling Force 4,100 lbs (1,860 Kg)

• Stroke Length .9” (23 mm)
• Pulls 3/16” (4.8 mm) & 1/4” (6.4
mm) Lockbolts
• Weight 6.38 lbs (2.9 kg)
• Requires 90 PSI at 3 CFM
• Includes stem deflector
The HK150A features a moveable jaw design which allows it to pull
1/8”, 5/32”, and 3/16” Cherrymax® rivets without any additional at-
tachments. It will also pull many other types of blind rivets ranging
from simple Pop® rivets to sophisticated Monobolts® in sizes rang-
Powerful air-hydraulic riveter is designed specifically to install two- ing up to 1/4” steel rivets.
piece lockbolt fasteners of all types, including Avdel MaxLok, Huck HK150A............................................................................. $272.95
Lockbolts, and Pop Lockbolts. 202929................. (Replacement 3-Piece Jaws)................. $25.95
ATS8921......................................................................... $1,259.95 HKRN205....................(Rivnut Conversion Kit)....................$169.95

38 800-248-0638 AIRCRAFT TOOL SUPPLY www.aircraft-tool.com

 BLIND RIVETERS
AIR HYDRAULIC BLIND RIVETER

Reacting to the need for a high

production quality blind riveter
with the ability to install both
aerospace and industrial qual-
ity blind rivets, FSI is pleased to
CORDLESS BLIND RIVETER KIT
offer the PT-202F air hydraulic
riveter. Coupling aerospace
quality pneudraulic compo-
nents with a well established
and user friendly blind rivet nose
assembly, the PT-202F offers
a perfect complement to our
line of limited production, field
maintenance and repair rivet-
ers. Ergonomically balanced
and weighing only 5.8 lbs the
rugged metal housing will offer years of service in both high produc-
tion and harsh field maintenance environments.
PT-202F........................................................................... $1,780.95

The new higher capacity PT-4000 cordless blind riveter offers the
sheet metal technician capability for installation of most all 1/4” di-
HAND HYDRAULIC RIVETER ameter blind rivets while retaining all the features of the PT-3000 with
respect to size, weight and versatility. Falling within the USAF TO-1-
1-688 spec, the PT-4000 develops in excess of 4,000 lbs of pulling
force over more than 3/4” of stroke. Utilizing the same battery packs
and charger as the PT-3000 riveter, the PT-4000 is a logical addition
for any organization normally requiring 1/4” diameter blind riveting
capability.
PT-4000C........................................................................ $1,780.95

CORDLESS BLIND RIVETER

The D-100C will install blind rivets up to 1/4” diameter (including ,

Monobolts®, and Huck Magna-Lok®) and blind rivet nuts up to 3/8”
Aluminum and 1/4-20” or 6mm steel.
D-100C............................................................................. $310.95

CHERRY TEXTRON™ BLIND RIVETER

Cherry Textron hand riv-

eter is ideally suited for
installing Cherry-Q, Pop With more than 1900lbs. of pulling force the PT-3000C is able to in-
Rivets, or Avex Rivets in stall single action blind rivets from 3/32” thru 3/16” diameter and 1/4”
sizes 1/8” through 3/16” aluminum Pop type rivets. So whether you are doing skin repairs, or
aluminum or up to 1/8” steel rivets. Includes nose pieces for 1/8”, full aircraft production the PT-3000C will make our riveting job much
3/16”, and 5/32” rivets. Length: 9-1/4”. easier and quicker.
G28................................................................................... $149.95 PT-3000C........................................................................ $1,570.95

800-248-0638 AIRCRAFT TOOL SUPPLY www.aircraft-tool.com 39

 BLIND RIVETERS
SWIVEL BLIND RIVETER MARSON® HEAVY-DUTY RIVNUT INSTALLER KIT

PULLS
CHERRY
MAX

This riveter has a swivel head which rotates a full 360° for versatility.
This riveter will double as a 90° offset riveter, or a straight (in line) puller
just by rotating the head. Pulls up to 3/16” Cherrymax® and many
other blind rivets without any additional attachments.
36021.................................................................................. $37.95

Industrial strength Rivnut tool is made from forged steel to withstand

CLOSE QUARTERS POP® RIVETER hard use. Unique design allows mandrels to be replaced quickly
Close quarters POP® and easily. Kit includes mandrels and an assortment of Rivnuts for
brand riveter features the following sizes: 6-32, 8-32, 10-32, 10-24, 1/4-20, 5/16-18, and
an offset nosepiece 3/8-16.
for easy access to
39313.................................. (Rivnut Kit)................................$99.95
corners and close
to wall applications. M39354................ (Replacement 6-32 Mandrel).................$15.95
Sets rivets from 3/32” M39355................ (Replacement 8-32 Mandrel).................$15.95
to 5/32” diameter. In- M39357............... (Replacement 10-32 Mandrel)................$15.95
cludes nosepiece to M39358..........................(1/4-20 Mandrel)...........................$17.95
set 1/8” rivets. M39371..........................(1/4-28 Mandrel)...........................$17.95
PRP-26A............................................................................. $188.95

RIVNUT INSTALLER KIT

AVERY RV-12 CORNER RIVET PULLER ASSISTANT

Designed for RV-12 rivets that get

pulled in close quarter or corner ap-
plications. Turned up angle at 10 de-
gree to shift pop rivet stem and puller
away from corner.

AE5012................................................................................ $17.95

13” HEAVY DUTY HAND RIVETER

This hand riveter features a
compound lever action that
reduces operator fatigue.
Our most popular rivnut installer kit contains everything you need
With a spent mandrel cup to
to install rivnuts in sizes 6-32, 8-32, 10-32, and ¼-20. The (pop rivet)
keep your work area clean,
style action makes installing rivnuts as easy as installing a pop rivet.
and the ability to pull stainless
steel rivets makes it a great 20RNK.................................................................................$65.95
addition to your toolbox. For 20RNK-6-32.......... (Replacement 6-32 Mandrel).................$12.95
rivets: 1/8, 5/32, 3/16, & 1/4” 20RNK-8-32.......... (Replacement 8-32 Mandrel).................$12.95
15050..................................................................................$44.95 20RNK-10-32....... (Replacement 10-32 Mandrel)................$12.95

40 800-248-0638 AIRCRAFT TOOL SUPPLY www.aircraft-tool.com

 BLIND RIVETERS
MARSON® DELUXE POP RIVETER KIT HAND RIVNUT INSTALLER

Unit is simple to use and allows an in-

expensive, efficient means for install-
ing Rivnuts.

RN190-6-32............... (Installs 6-32 Rive-Nuts)......................$25.95

RN190-8-32............... (Installs 8-32 Rive-Nuts)......................$25.95
RN190-10-32............ (Installs 10-32 Rive-Nuts).....................$25.95

RIVNUT TOOL

The Marson HP-2 is the number one selling hand rivet tool in the
industry. Known and trusted for durability, quality and performance,
the HP-2 is often copied but never duplicated. The HP-2 sets up to
3/16” steel rivets and comes with four mounted nosepieces (3/32”,
1/8”, 5/32” and 3/16”) and a service wrench.
The deluxe hand riveter kit includes the Marson HP-2 riveter, tool, The Rivnut Tool is an inexpensive alternative to industrial drivers. It’s
wrench, removable nosepieces for 3/32”, 1/8”, 5/32” and 3/16” design enables the rivet nuts to be seated tighter than with con-
riveting, plus and assortment of over 200 assorted Alcoa Klik-Fast ventional tools. Compact design takes up less room in your tool
rivets: 40 each SB4-2, SB4-4, AB4-2A; 25 each SC4-4, AB6-2. Also box. Complete kit contains driver, plus mandrels for 6-32, 8-32, and
includes a molded plastic case. 10-32 Rivnuts.
200KT...............................(Complete Kit)............................. $62.95 RNT01..................................................................................$26.95
HP-2...................................(Riveter Only).............................$39.95

SPEED DRIVER RIVNUT INSTALLER

POP RIVNUT INSTALLER
Fast economical hand tool for
installing aluminum or steel Riv-
nuts or thread-serts. Conversion
kits are also available that allow
you to change the tool size.

Convert your conventional hand pop riveter into an economical

Rive-Nut installer tool.
R290-6-32................. (Installs 6-32 Rive-Nuts)......................$11.95 INSTALLATION TOOL
R290-8-32................. (Installs 8-32 Rive-Nuts)......................$11.95 PART PRICE
R290-10-32.............. (Installs 10-32 Rive-Nuts).....................$11.95
C50-6000-4X40 $159.95
C50-6000-6X32 $159.95
C50-6000-8X32 $159.95
RIVNUTS
C50-6000-10X32 $197.95
C50-6000-10X24 $159.95
Aluminum “notchless” threaded
nut. Grip length of .010 to .075 CONVERSION KIT REPL. MANDREL
inches. Sold in packages of 10 PART PRICE PART PRICE
pieces.
C50-4X40 $45.95 C5000-4X40 $29.95
C50-6X32 $45.95 C5000-6X32 $29.95
RIVNUT-6................................. (6-32).................................... $2.95 C50-8X32 $45.95 C5000-8X32 $29.95
RIVNUT-8................................. (8-32).................................... $3.95 C50-10X32 $45.95 C5000-10X32 $29.95
RIVNUT-10.............................. (10-32)................................... $3.95 C50-10X24 $45.95 C5000-10X24 $29.95
RIVNUT-1/4-20........................ (1/4-20)....................................$3.95

800-248-0638 AIRCRAFT TOOL SUPPLY www.aircraft-tool.com 41

 SHEET METAL FASTENERS
CLECO KIT SPRING TENSION CLAMPS

24EL 26EL 542 543

These clamps can be applied in a fraction of the time required for

ordinary screw clamps by eliminating hand tightening. Provides 70
lbs. of clamping pressure. Uses standard Cleco Pliers.
Our cleco kit comes with an assortment of clecos (0 to .25” grip PART REACH CAPACITY PRICE
range) plus a pair of cushioned cleco pliers packaged in a con-
venient storage case. The 50 piece kit contains 13 ea. of the 3/32” 24EL 1/2” 0-3/4” $2.45
(silver), and CL-1/8 (copper) clecos; plus 12 ea of the 5/32” (black), 26EL 1” 0-3/4” $2.45
and 3/16” (gold) clecos. The 100 piece kit contains 25 each of the 542 2” 0-1/2” $5.95
3/32”, 1/8”, 5/32”, and 3/16” clecos. 543 3” 1/4”-15/32” $7.95
CL50K...............................(50 Piece Kit)..............................$31.95
CL100K.............................(100 Piece Kit).............................$59.95

CLECO PLIERS

CLECO FASTENERS For use with clecos and

spring loaded fasteners.

Used to temporarily hold panels

and fixtures in place prior to rivet-
ing. Standard size (2”x 3/8”). 70 lbs
pulling force.

131..................................... (ATS Brand).................................$7.95

PART SIZE GRIP PRICE 131A..........................(Pan American Brand).........................$6.95

CL-3/32 3/32” 0-1/4” $0.49

CL-1/8 1/8” 0-1/4” $0.49
CL-5/32 5/32” 0-1/4” $0.49
SPRING LOADED CLECO PLIERS
CL-3/16 3/16” 0-1/4” $0.49
CL-1/4 1/4” 0-1/4” $1.35

EXTRA LONG SERIES

KHD-3/32 3/32” 0-1/2” $1.35
KHD-1/8 1/8” 0-1/2” $1.35 These new spring-loaded conven-
KHD-5/32 5/32” 0-1/2” $1.35 tional cleco pliers are designed for
KHD-3/16 3/16” 0-1/2” $1.35 a user friendly cleco installation.
Made from forged steel, the verti-
cal profile of the Clecall allows for
cleco installation in tight areas as
CLECO FASTENERS “SPECIAL”
well as an upside down surface
Order pre-packaged clecos for additional savings. Each package easily. A tedious task has now be-
contains 25 pieces of our standard clecos. come effortless with the Clecall.
25CL-3/32.............. (25 Pieces CL-3/32 Clecos)...................$11.95
25CL-1/8................. (25 Pieces CL-1/8 Clecos)....................$11.95
25CL-5/32.............. (25 Pieces CL-5/32 Clecos)...................$11.95 12-03756............................. (Upright)..................................$20.95
25CL-3/16.............. (25 Pieces CL-3/16 Clecos)...................$11.95 12-03807........................... (Standard)................................$11.95

42 800-248-0638 AIRCRAFT TOOL SUPPLY www.aircraft-tool.com

 SHEET METAL FASTENERS
WING NUT FASTENERS AIRLOC® GROMMET INSTALLATION TOOLS

For applications requiring a

high-clamping force. These
fasteners can be adjusted to
deliver from zero to 300 lbs. Per-
fect for all types of metallic and
composite materials.

PART SIZE GRIP PRICE

KWN-3/32 3/32” 0 -1/2” $4.95 FLUSH ROUND (OVAL)
KWN-1/8 1/8” 0 -1/2” $4.95
Airloc® (also branded as A-SPEC™ and ALOC™) fasteners are very
KWN-5/32 5/32” 0 -1/2” $4.95
common to BeechCraft airplanes and Piper cowlings. This specialty
KWN-3/16 3/16” 0 -1/2” $4.95
tool is required to flare the stud grommets when installing these type
KWN-7/32 7/32” 0 -1/2” $5.95
of fasteners. Select the tool corresponding to the series (2 or 5) and
KWN-1/4 1/4” 0 -1/2” $5.95
style head (flush or round).
EXTRA LONG SERIES
PART DESCRIPTION PRICE
KWNL-3/32 3/32” 0 -1” $4.95
MS-AL2R #2 Round (Oval) Head $29.95
KWNL-1/8 1/8” 0 -1” $4.95
MS-AL2F #2 Flush Head $29.95
KWNL-5/32 5/32” 0 -1” $4.95
MS-AL5R #5 Round (Oval) Head $29.95
KWNL-3/16 3/16” 0 -1” $4.95
MS-AL5F #5 Flush Head $29.95

HEX NUT FASTENERS AIRLOC CROSSPIN INSTALLATION TOOL

They provide high clamp-
ing force with the ability to
be quickly installed and re-
moved with a Hex Nut Run-
ner. Delivers from zero to 300
lbs. of clamping force.

PART SERIES HEAD PRICE

HNX-3/32 3/32” 0 -1/2” $3.95 This tool accommodates the two series (diameters) of Airloc (A-Spec)
HNX-1/8 1/8” 0 -1/2” $3.95 studs commonly found in Beechcraft and Raytheon aircraft: #2 and
HNX-5/32 5/32” 0 -1/2” $3.95 #5. It has a seat for each series so the cross pin can be installed
HNX-3/16 3/16” 0 -1/2” $3.95 and centered and operates by placing the pin into the appropri-
HNX-7/32 7/32” 0 -1/2” $3.95 ate hole where it should remain seated. Then compress the pliers
HNX-1/4 1/4” 0 -1/2” $3.95 to force the cross pin into the stud. Once completely clamped, the
EXTRA LONG SERIES pin will be perfectly centered in the stud.

HNXL-3/32 3/32” 0 -1” $4.25

MS-ALP................................................................................ $49.95
HNXL-1/8 1/8” 0 -1” $4.25
HNXL-5/32 5/32” 0 -1” $4.25
HNXL-3/16 3/16” 0 -1” $4.25 CAMLOC® DRILLING TEMPLATES

WING NUT/HEX NUT DRIVE ADAPTER

Works with any drill chuck, or any 1/4” MS-DT2 MS-DT4 MS-DT4B
hex screwdriver. Drives all styles of wing
nuts and hex nuts with a 5/16” nut.
Provides proper hole spacing for Camloc receptacles.
MJ350................................ (USA Made)...............................$25.95 MS-DT2..........................(2600/2700 series)............................$3.95
WHD01................................(Economy)...............................$12.95 MS-DT4.............................. (4000 series)................................$3.95
MJ375...............................(Hand Driver)..............................$25.95 MS-DT4B................. (4000 series hole enlarger).....................$3.95

800-248-0638 AIRCRAFT TOOL SUPPLY www.aircraft-tool.com 43

 SHEET METAL FASTENERS
DZUS® GROMMET FLARING TOOLS ATS CAMLOC® PLIERS

OVAL

Used to depress Camloc® studs so they can be properly installed.

Manufactured from drop forged steel with polished surfaces. Grips
are rubber cushioned for extra comfort and to reduce slipping.
CLP1....................................................................................$18.95

CLAMPING TOOL
CAMLOC® RECEPTACLE DRILL JIG
FLUSH

These tools are designed to flare the stud grommet when installing
Dzus® (Z-SPEC and ZLOC™) fasteners. The #5 tool has been spe-
cifically designed to replace grommets in Beech Bonanza cowlings
without having to remove the cowling brackets. Complete instruc-
tions and diagrams included. This drill Jig provides the proper hole spacing for Camloc® (C-Lock)
Note: Every installation set requires the use of a clamping tool (not in- fasteners so that rivet and center holes are drilled accurately and
cluded). However you need only one, as each set will fit the same clamp. easily. One end of the T16 jig has 3/4” spacing for the 2600 and
2700 series fasteners. The other end has 1” spacing for the 4000
PART SET DESCRIPTION PRICE series fasteners.
MS-A3C #3 Round (Oval) Head $40.95 MS-T16.................................................................................$36.95
MS-A4C #4 Round (Oval) Head $40.95
MS-A5C #5 Round (Oval) Head $40.95
MS-A6.5C #6.5 Round(Oval) Head $40.95
CAMLOC® GROMMET FLARING TOOL
MS-F4C #4 Flush Head $40.95
MS-F5C #5 Flush Head $40.95 Used for installing the flare type Camloc (C-
MS-F6.5C #6.5 Flush Head $40.95 Spec) grommets. This simple tool consists
of two blocks that are precision machined
Clamping Tool: required for
MS-ZC $24.95 with the correct contours to make a per-
use of the above sets
fect flare every time.

MS-40GFT............................................................................$29.95
DZUS® “S” WIRE BENDING JIG

AVERY SNOOPY DZUS DRIVER

This tool bends Dzus® (Z-Lock) “S” wire receptacles quick and easy.
Adjust more than 1/2” by pulling on the spring. Special legs elimi- This classic tool is a favorite of A&P mechanics. It installs and re-
nates the risk of pull through. Fits all 5 and 6 series springs. Complete moves the Dzus fasteners typically found in airplane and race car
instructions included. panels.
MS-7301.............................................................................. $41.95 AE7810................................................................................$19.95

44 800-248-0638 AIRCRAFT TOOL SUPPLY www.aircraft-tool.com

 SHEET METAL FASTENERS
CAMLOC® RECEPTACLE PICK CAMLOC® SHEET METAL DIMPLING TOOL

Used to disengage the locking-clip on the MS213 and MS245 Ad-

justable-Depth Camloc Receptacles, for depth-setting adjustments.
MS-PK....................................................................................$7.95

MS-27DT MS-40DT
CAMLOC DEPTH TOOL
Used for dimpling thin sheet metal panels to accept Camloc Fas-
teners. It can also be used to dimple panels to accept FJ4 Series
Flush-Head Dzus (Z-Spec) Fasteners.
MS-27DT........................(2600/2700 Series).........................$21.95
MS-40DT............................ (4000 Series)..............................$21.95

This tool is pre-set to the receptacle height, which saves time by

eliminating the need to put the outer panel in place for fitting, and
allows you to go directly to the final installation phase.
CAMLOC® SNAP RING INSTALLATION TOOLS
MS-ARDT4.......................... (2000 Series)..............................$62.95
MS-ARDT2.......................... (4000 Series)..............................$62.95

CAMLOC OVERSIZE RETAINER TOOL

Installs Camloc® 2600 and 2700 series fasteners. Quickly installs

2600-LW, 2600-SW and 27S5-1 stud retainers. The rubber tip pro-
vides a comfortable grip to prevent fatigue when installing large
If the installation hole of your Camloc/C-Spec (MS4002 series) is quantities.
worn out, you must use an oversized hole and retainer. This tool will
MS-T98...........................(2600/2700 Series).........................$28.95
simplify the process of installing such retainers. It will properly install
the retainer on the grommet without disruption the internal teeth of MS-T26............................... (4000 Series)..............................$24.95
the ring itself.
MS-T40.................................................................................$28.95

DZUS® FLUSH HEAD STUD DIMPLER

This tool dimples sheet metal pan-

CAMLOC FLUSH GROMMET COUNTERSINK BIT els with the exact countersink an-
gle for Dzus® (Z-Lock) FN and FR
Counter Sink Bit for 4000 Series series flush head studs. Made from
Flush Grommets. When outer heat treated steel and zinc plated
panels are too thick for dimpling, for long life. A grade 8 bolt and nut
use this bit to form the perfect complete the assembly. Fits 5, 6,
countersinking angle to match and 6.5 series.
Camloc/C-Spec 4000 series
flush grommets. Top quality HSS
with a detachable center guide.
MS-4GC............................................................................ $209.95 MS-DT1................................................................................$20.95

800-248-0638 AIRCRAFT TOOL SUPPLY www.aircraft-tool.com 45

 HI-LOK® TOOLING
HI-LOK REMOVAL PLIERS THE “LIBERATOR” HI-LOK INSTALLATION SYSTEM

The 13 piece kit contains two

“roller clutch” ratchet heads
which are torque rated up to
80 in-lbs; two 1/4” drive studs
for use with any brand of 1/4”
drive socket, as well as a vari-
ety of straight and 90 degree
handles. The entire system is
The diamond cut jaws of these Hi-Lok® interchangeable and will lock
Removal Pliers will grip the fastener from into an unlimited range of straight and offset configurations! The
the top or bottom of the offset head. ratchet heads feature the unique ability to be “indexed” in any posi-
tion by a full 360 degrees. Includes molded plastic case.
LIBK-13.............................................................................. $115.95
3579....................................................................................$39.95

HI-LOK OFFSET PLIERS

HI-LOK INSTALLATION WRENCH The Hi-Lok® Removal Pliers of-
fer a quick and inexpensive
alternative for removing any
frangible hex collars such as
Hi-Lok, Hi-Lite, Hi-Tigue, Veri-Lite
These clutch driven installation wrenches are designed for smooth, and C-Lok fasteners. The hard-
positive engagement in limited access areas. There’s no lost motion ened steel jaws are specially
when you ratchet assemblies. Tested to 220 inch pounds. designed to maximize the grip-
ping surface around the collar.
PART DESCRIPTION DRIVE PRICE
ZHP-200B............................................................................. $69.95
3539 3/8” dia by 3” long 1/4” $62.95
3539L 3/8” dia by 6” long 1/4” $69.95 ZHP-100B............................................................................. $52.95

HI-LOK HEX DRIVERS

ROLLER-CLUTCH HI-LOK® INSTALLATION WRENCH

Use these drivers to “keep” Hi-Lok type fas-

teners when installing with hand wrenches.
Hex tip can be replaced as needed. Comes
complete with tip and installation wrench.
Designed for installing Frangible Collar (Hi-Lok®) fasteners in limited ac-
cess areas. Toothless bearing clutch provides smooth precise move- HLK-5/64.................................(5/64”).....................................$6.95
ment with no lost motion. Thru-hole permits the use of allen wrench HLK-3/32.................................(3/32”).....................................$6.95
when installing non-interference fit fasteners. Reversible. HLK-1/8....................................(1/8”)......................................$6.95
PART DESCRIPTION DRIVE PRICE
BT2303 3” long 1/4” $45.95 HI-LOK REMOVAL SOCKETS
BT2606 6” long 1/4” $45.95 These patented sockets are the ultimate
for removing stubborn Hi-Lok® fasteners.
Hardened chromium-alloy left-handed ta-
per threads bite into and firmly grips the
HI-LOK® GRIP GAUGE fastener for easy removal.

PART HI-LOK SIZE DRIVE LENGTH PRICE

3581-5 5/32” 1/4” 1” $23.95
3581-6 3/16” 1/4” 1.21” $23.95
3581-8 1/4” 1/4” 1.21” $23.95
A convenient tool to determine the correct length and diameter Hi- 3581-10 5/16” 1/4” 1.75” $24.95
Lok to use . Just hook it in the hole and read the scale. Graduated 3581-12 3/8” 1/4” 1.75” $24.95
in inches on one side, and millimeters on the other. 3581-14 7/32” 1/4” 1.75” $25.95
2-612....................................................................................$9.95

46 800-248-0638 AIRCRAFT TOOL SUPPLY www.aircraft-tool.com

 CUTTERS
MICROSTOP COUNTERSINK KIT PILOT CUTTERS
• High Speed Steel
• Precision ground diameter
• 1/4-28 male thread
• 3 cutting flute

PART PILOT USE PRICE

100° - 1/2” DIA (for use in standard microstops)
1000-100-40 40 3/32” rivet $6.95
1000-100-30 30 1/8” rivet $6.95
1000-100-21 21 5/32” rivet $6.95
1000-100-12 12 3/16” rivet $6.95
1000-100-33 33 4 AN Screw $11.95
Our countersink fits any air or electric drill with a 1/4” chuck, and will 1000-100-28 28 6 AN Screw $11.95
accept any cutter having a male 1/4-28 thread and a diameter of 1000-100-19 19 8 AN Screw $10.95
up to 1/2”. Complete kit is a great package deal featuring our 133 1000-100-12 12 10 AN Screw $6.95
Microstop Countersink plus 4 pilot cutters (1000-100 series) in sizes 120° - 1/2” DIA (for use in standard microstops)
#40, #30, #21, and #12.
1000-120-40 40 3/32” rivet $10.95
133KIT..............................(Complete Kit)............................. $51.95 1000-120-30 30 1/8” rivet $10.95
133................................(Countersink Only).........................$27.95
100° - 3/8” DIA (for use in slim microstops)
133F..........................(No-Mar Screw on Foot).......................$6.95
1038-100-40 40 3/32” rivet $7.95
1038-100-30 30 1/8” rivet $7.95
1038-100-21 21 5/32” rivet $7.95
HEAVY DUTY MICROSTOP COUNTERSINK 1038-100-12 12 3/16” rivet $7.95

NARROW EXTENDED MICROSTOP COUNTERSINK

Our heavy duty microstop uses ball bearings for ultra smooth opera-
tion. The ball bearing design also makes it run much cooler than
a standard microstop. Depth adjustable in 0.001” increments with This microstop reaches into very confined areas and the extended
positive locking collar. Shaft travel is 9/32”. Attaches to any drill hav- reach is great for getting down into narrow channels such as seat
ing a 1/4” chuck. Uses standard 1/4-28 threaded cutters up to ½” in tracks. Uses 1/4-28 threaded cutters up to 3/8” diameter. Shaft travel
diameter. Rated at 10,000 RPM. is 1/4”. Rated at 3000 RPM. Note: Requires 3/8” dia. cutters.
133-HD................................................................................$39.95 133-NX................................................................................$41.95

SLIM MICROSTOP COUNTERSINK

MINI MICROSTOP COUNTERSINK

Our slim microstop packs all the features of a standard microstop in

Use this microstop in those tight areas that can’t be reached by a slim design that’s only 11/16” in diameter. It’s ideal for those nar-
a standard cage. It’s only 1-3/8” long, and threads onto any drill row areas that can’t be reached with a standard microstop. This mi-
with a 1/4-28 threaded shaft. Features bronze bearing and the posi- cro-stop features bronze bearings, with a depth adjustable in 0.001”
tive locking collar is adjustable in 0.003” increments. Uses 1/4-28 increments with positive locking collar. Shaft travel is 9/32”. Attaches
threaded cutters up to 5/8” diameter. Shaft travel is 3/32”. Rated at to any drill having a 1/4” chuck. Uses standard 1/4-28 threaded cut-
3000 RPM. ters up to ½” in diameter, Rated at 3000 RPM.
133-MINI............................................................................. $20.95 133-SLIM.............................................................................$31.95

800-248-0638 AIRCRAFT TOOL SUPPLY www.aircraft-tool.com 47

 CUTTERS
ZERO FLUTE PILOT CUTTER CARBIDE TIPPED CUTTER
• High Speed Steel • Solid carbide tip
• 1/2” diameter • 1/2” diameter
• 1/4-28 male thread • 1/4-28 male thread
• 100° x high-hook flute • 100° x 2 cutting flutes
The unique “high-hook” design of zero flute These cutters work exceptionally well on highly
countersinks allow them to cut with virtually no chatter. Fits into any abrasive materials such as Kevlar® and other “difficult to machine”
standard microstop. materials.

PART PILOT USE PRICE PART PILOT USE PRICE

4100-40 40 3/32” rivet $25.95 3100-40 40 3/32” rivet $35.95
4100-30 30 1/8” rivet $25.95 3100-30 30 1/8” rivet $35.95
4100-21 21 5/32” rivet $25.95 3100-21 21 5/32” rivet $35.95
4100-12 12 3/16” rivet $25.95 3100-12 12 3/16” rivet $35.95

ZERO FLUTE COUNTERSINK CARBIDE TIPPED CUTTER (REMOVABLE PILOT)

• High Speed Steel Carbide tipped for durability making it great
• 100° x high-hook flute for composite work. 1/4” x 28 male thread.
Requires 1500P pilot. Has 3/32” (0.093) pilot
The “high-hook” design is a single hole drilled through the head of hole. See website for details.
the cutter, which makes it virtually chatter-free. And since it has no
flutes to shift inside the hole, the cutter always stays on center. Fits
any drill with a 1/4” chuck. AT455C-1/2............................ (1/2”)....................................$39.95
AT455C-5/8............................ (5/8”)....................................$41.95
ZFC01....................... (3/32” to 1/4” Diameter).....................$10.95
AT455-1/2.....................(Non-carbide 1/2”).........................$19.95
ZFC02...................... (1/8” to 27/64” Diameter)....................$13.95

RIVET SHAVER BIT REMOVABLE PILOTS

• Solid carbide tip

• 1/4-28 male thread
• 2 flat cutting flutes These pilots are used exclusively with the AT455 Cutters. All pilots
have a 3/32” (0.093”) shank.

PART DIAMETER PRICE PART SIZE PRICE PART SIZE PRICE

3000-5/16 .313 $38.95 1500P-40 40 $6.95 1500P-16 16 $6.95
3000-3/8 .375 $38.95 1500P-30 30 $6.95 1500P-12 12 $6.95
3000-7/16 .438 $38.95 1500P-27 27 $6.95 1500P-10 10 $6.95
3000-1/2 .500 $38.95 1500P-21 21 $6.95 1500P-3/16 3/16” $6.95
3000-9/16 .593 $38.95 1500P-18 18 $6.95 1500P-1/4 1/4” $6.95
3000-5/8 .625 $38.95

HOLLOW CUTTER
CHATTERLESS COUNTERSINK Hollow cutters are designed to cut
A unique 6-fluted countersink away swagged or threaded collars
designed to eliminate the from fasteners so that the fastener
chatter commonly encoun- pin can be easily removed. Hollow
tered when using conven- cutters are ideal for removing Hi-
tional countersinks. Shear® rivets.
493C-5/32............................. (5/32”).....................................$7.95
408C-4-4........................ (1/4”x1/4”x100°)............................$11.95 493C-3/16............................. (3/16”).....................................$7.95
408C-4-5....................... (5/16”x1/4”x100°)...........................$11.95 493C-1/4................................ (1/4”)......................................$7.95
408C-4-6........................ (3/8”x1/4”x100°)............................$11.95 493C-5/16............................. (5/16”).....................................$7.95
408C-4-8........................ (1/2”x1/4”x100°)............................$11.95 493C-3/8................................ (3/8”)......................................$7.95

48 800-248-0638 AIRCRAFT TOOL SUPPLY www.aircraft-tool.com

 CUTTERS
AIRCRAFT COUNTERBORES BAYONET SPOTFACE AND COUNTERSINK CUTTERS

Made of High Speed Steel. Requires pilot (see chart below).

PILOT
PART DIA. LENGTH PRICE
SHANK AT402 Series (100°) AT403 Series (Flat)
4000-1016 1/4” 2-3/8” 3/32” $19.95 Made of High Speed Steel. Requires pilot (see chart below).
4000-1018 9/32” 2-3/8” 3/32” $19.95
4000-1020 5/16” 2-3/8” 3/32” $19.95 PART CUTTER PILOT
PRICE
4000-1022 11/32” 2-3/8” 3/32” $22.95 100° FLAT DIA. SIZE
4000-1024 3/8” 2-3/8” 3/32” $21.95
AT402-1 AT403-1 1/4” 3/32” $18.95
4000-1026 13/32” 2-3/4” 1/8” $22.95
AT402-1B AT403-1B 1/4” 1/8” $22.95
4000-1028 7/16” 2-3/4” 1/8” $22.95
AT402-2 AT403-2 5/16” 1/8” $19.95
4000-1030 15/32” 2-3/4” 1/8” $24.95
AT402-2B AT403-2B 5/16” 5/32” $23.95
4000-1032 1/2” 2-3/4” 1/8” $24.95
AT402-3 AT403-3 3/8” 1/8” $19.95
4000-1034 17/32” 2-3/4” 1/8” $29.95
AT402-3B AT403-3B 3/8” 5/32” $23.95
4000-1036 9/16” 2-3/4” 1/8” $32.95
AT402-3C AT403-3C 3/8” 3/16” $23.95
4000-1038 19/32” 2-3/4” 1/8” $30.95
AT402-4 AT403-4 7/16” 5/32” $19.95
4000-1040 5/8” 2-3/4” 1/8” $27.95
AT402-4B AT403-4B 7/16” 3/16” $23.95
4000-1042 21/32” 2-3/4” 3/16” $33.95
AT402-5 AT403-5 1/2” 3/16” $24.95
4000-1044 11/16” 2-3/4” 3/16” $39.95
AT402-5B AT403-5B 1/2” 1/4” $24.95
AT402-6 AT403-6 9/16” 3/16” $23.95
COUNTERBORE PILOTS AT402-6B AT403-6B 9/16” 1/4” $25.95
AT402-7 AT403-7 5/8” 1/4” $20.95
For use with 4000 series AT402-7B AT403-7B 5/8” 5/16” $23.95
AT402-8 AT403-8 3/4” 1/4” $41.95
counterbores (above.) AT402-8B AT403-8B 3/4” 5/16” $32.95
PART PILOT SHANK PRICE AT402-9 AT403-9 7/8” 3/8” $31.95
AT402-10 AT403-10 1” 3/8” $56.95
1400P-1A 3/32” 3/32” $5.95
1400P-2A 40 3/32” $5.95
1400P-3A 1/8” 3/32” $5.95
1400P-3B 1/8” 1/8” $5.95 BACK CUTTER PILOTS
1400P-4A 30 3/32” $5.95
1400P-4B 30 1/8” $5.95
1400P-5A 5/32” 3/32” $5.95
1400P-5B 5/32” 1/8” $5.95
1400P-6A 21 3/32” $5.95
1400P-6B 21 1/8” $5.95 For use with AT402 and AT403 series cutters (above).
1400P-7A 3/16” 3/32” $5.95
PART SIZE PRICE PART SIZE PRICE
1400P-7B 3/16” 1/8” $5.95
1400P-8A 10 3/32” $5.95 AT404-3/32 3/32” $9.95 AT404-1/4 1/4” $9.95
1400P-8B 10 1/8” $5.95 AT404-1/8 1/8” $9.95 AT404-5/16 5/16” $9.95
1400P-9A 7/32” 3/32” $4.95 AT404-5/32 5/32” $9.95 AT404-3/8 3/8 $9.95
1400P-9B 7/32” 1/8” $4.95 AT404-3/16 3/16” $9.95
1400P-10A 1/4” 3/32” $5.95
1400P-10B 1/4” 1/8” $5.95
1400P-11B 9/32” 1/8” $5.95
100° COUNTERSINKS
1400P-11C 9/32” 3/16” $4.95
1400P-12B 5/16” 1/8” $5.95 Three flute design. Made
1400P-12C 5/16’ 3/16” $4.95 of High Speed Steel.
1400P-13B 3/8” 1/8” $5.95
1400P-13C 3/8” 3/16” $4.95
1400P-14B 13/32” 1/8” $4.95 PART DIA. SHANK PRICE
1400P-14C 13/32” 3/16” $4.95
1400P-15B 7/16” 1/8” $5.95
2000-1/4X3/16 .250 3/16” $12.95
1400P-15C 7/16” 3/16” $4.95 2000-3/8X1/4 .375 1/4” $13.95
1400P-16B 15/32” 1/8” $4.95 2000-1/2X3/8 .500 3/8” $11.95
1400P-16C 15/32” 3/16” $4.95 2000-5/8X3/8 .625 3/8” $14.95
1400P-17C 1/2” 3/16” $4.95 2000-3/4X3/8 .725 3/8” $33.95

800-248-0638 AIRCRAFT TOOL SUPPLY www.aircraft-tool.com 49

 DRILLING EQUIPMENT
ATS PRO PALM DRILL

KEYLESS CHUCK PRECISION CHUCK

Lifetime Warranty
Our new Pro Palm Drill is only 7” long yet has all of the features of a
full sized drill. It delivers up to .5HP of power, and the trigger is fully
feathered allowing for very precise speed control. It runs smoothly and
quietly even when operating at top speed.

ATS61100.................................................................................... (2600 RPM).................................................................................. $129.95

ATS61100K...................................................................(2600 RPM With Keyless Chuck).................................................................. $149.95
ATS61100P................................................................. (2600 RPM With Precision Chuck)................................................................. $169.95
ATS61101.................................................................................... (4000 RPM).................................................................................. $139.95
ATS61101K...................................................................(4000 RPM With Keyless Chuck).................................................................. $164.95
ATS61101P................................................................. (4000 RPM With Precision Chuck)................................................................. $175.95

ATS PRO REVERSIBLE PALM DRILL

• 1/2HP at operating speed

• 90 psi operating pressure
• Positive reverse mechanism
• 1/4” Jacobs Chuck
• True variable speed trigger
• Rubber grip handle

This is one of the smallest reversible drill on the market that

features a full feathering trigger. It’s just over 7” long and de-
livers .5HP of power to drill through even the toughest materi-
Lifetime Warranty
als. The fully variable trigger gives you total control over the
speed all the way from 0 to 2000 RPM. Very smooth running
and quiet operation.

ATS61100R.................................................................................. (2000 RPM).................................................................................. $145.95

50 800-248-0638 AIRCRAFT TOOL SUPPLY www.aircraft-tool.com

 DRILLING EQUIPMENT
ATS PRO PALM DRILL

ACTUAL SIZE

Lifetime Warranty

We now offer a full line of compact Truly Variable speed drills giving you exact control on the job.
This quiet design features a feather trigger allowing variable speeds ranging from 500 to 2600 RPM.
Our ATS drill is only 7” long yet maintain all the features of a full size drill and only weigh 1.6lbs mak-
ing it easy to operate without fatigue and consume only 3 cfm at 90 psi. So, whether you’re drilling
holes or honing these ATS Pro Palm Drills will keep the job moving along. These drills are backed by
our Lifetime Warranty.

800-248-0638 AIRCRAFT TOOL SUPPLY www.aircraft-tool.com 51

 DRILLING EQUIPMENT
ATS HIGH SPEED AVIATION AIR DRILL ATS HEAVY DUTY AIR DRILL

Lifetime Warranty

• 1/4” (6.4 mm) Jacobs® Chuck

• 2-Speed (Low/High) Control
• Ergonomic design • 3/8” (9.5 mm) Jacobs® Chuck • Full Cage Gear
• 5,000 RPM • Variable speed control • 2,600 RPM
• 4.0 CFM • Ergonomic Design • 67 hp (.5 kw)
• 1.25 lbs (.5 kg) • 7-1/2” (190 mm) OAL • 2.07 lbs (.94 kg)
A very nice palm-sized precision air drill that runs at 5000 RPM. With a speed of 2600 RPM and .67 hp of power, our heavy-
It’s ideal for applications requiring extra-high speed such as duty drill can take on any job. The high quality full cage gear
drilling fiberglass, composites, or tough metals. It cuts cleanly design ensures that this drill keeps running smoothly even un-
though aluminum, composites, and even tough metals such der hard abuse. A solid performer that will get the job done
as Titanium. Also features planetary gears for smooth opera- every time. 4.0 CFM
tion. 1/4” chuck. Only 6” long. 90 psi pressure. ATS6101..............................................................................$85.95
ATS6100B........................................................................... $119.95 ATS6104...............(2400 RPM Reversible Model).................$85.95

ATS REVERSIBLE PALM DRILL ATS PALM DRILL

• 1/4” (6.4 mm) Jacobs® Chuck

• Two-stage (Low/High) Control Trigger
Lifetime Warranty • 5-7/8” (150 mm) Overall Length
• 1.54 lbs (.7 kg)
• 2,800 RPM Free Speed
• 4.0 CFM

This is the drill I wish I had when I was still out there hauling a
This palm drill is only 6’’ long and is fully reversible. Runs toolbox. It has everything a proper drill should have: speed,
smoothly at 2200 RPM thanks to its planetary gear system. durability, and flexibility. And the nice part is that this feather-
Features a comfort grip cushion handle. 1/4” chuck. 90 psi light gem is small enough to literally fit into your shirt pocket.
operating pressure. 4.0 CFM A real work of art!
ATS6100F.............................................................................$99.95 ATS6100............................................................................ $109.95

52 800-248-0638 AIRCRAFT TOOL SUPPLY www.aircraft-tool.com

 DRILLING EQUIPMENT
PRECISION DRILL CHUCK (1/4”) ATS HEAVY DUTY STRAIGHT AIR DRILL

The in line configuration of a straight drill lets you reach into tight
Precision chuck features the utmost in quality. It’s a balanced chuck areas and drill without having to worry about your hand or the drill’s
with precision-ground jaws that stays centered to minimize wobble handle getting in the way.
and runout.
T9888-SPC........................................................................... $49.95 • 3/8” (9.5 mm) Jacobs® Chuck • Planetary Gear
• 2,400 RPM • 7-7/8” (200 mm) Overall Lg.
• .5 hp (.37 kw) • 2.86 lbs (1.3 kg)
ATS6110..............................................................................$75.95

MINIATURE 1/8” DRILL CHUCK

DRILL STOPS

This miniature chuck is a perfect addition to your toolbox. It’s less

than an inch in diameter and features 1/4-28 thread to mount di- Used to stop the drill bit after reaching a preset depth. Overall
rectly to your Angle Drill or drill attachment. And at only 2 ounces, it length of 1-5/16”
will not load down your drill. Excellent for close-quarters work.
PART SIZE PRICE P/N SIZE PRICE
T9750-C..............................................................................$36.95
DS-40 40 $1.95 DS-21 21 $1.95
DS-30 30 $1.95 DS-12 12 $1.95
DS-1/4 1/4” $4.95 DS-5/16 5/16” $4.95

KEYLESS 1/4” DRILL CHUCK

Positive locking design tightens its

DRILL GAUGES
grip on the bit as it spins to mini-
mize slippage, but will open with
just a simple twist. Jaws closes
down to true-zero, so it will handle • Top quality drill gauges are used
even the smallest bits while stay- to quickly identify drill sizes.
ing on-center. • Made of heavy-gauge heat
treated steel, machined to close
tolerances.
T9888-KC.............................(True-Zero)................................$34.95 • Hole sizes and decimal equiva-
30353................................... (Jacobs)................................. $18.95 lents are permanently etched
into the metal.

P005 P010
CLOSE QUARTER CONE CHUCK

PART TYPE HOLES PRICE

Attaches to all angle drills with 1/4” x 28
thread. Ideal for getting into tight areas. P005 Fractional 29 $12.95
P010 Number 60 $12.95
A604...................................................................................$41.95

800-248-0638 AIRCRAFT TOOL SUPPLY www.aircraft-tool.com 53

 DRILLING EQUIPMENT
ATS COMPACT ANGLE AIR DRILL (WITH JIFFY® HEAD)

Lifetime Warranty

With a head height of only .937” (23.8mm) and .625” (15.8mm) in diameter, our Compact Angle Drill will get into those extremely close-
quarter areas other drills simply can’t. It’s solidly engineered with top quality parts such a Jiffy® angle head, and a powerful compact air
motor designed to our specifications. Operates at 3500 RPM and delivers .33 hp using 90 psi of air. Teasing throttle and needle bearing
construction for smooth operation and longer tool life. Accepts 1/4-28 threaded drill bits and attachments (1/4” max drill capacity). Overall
length of 9”. Weighs only 1.08 lbs.
775..................................................................................(90° Drill with Jiffy® Head)...................................................................... $449.95
77545..............................................................................(45° Drill with Jiffy® Head)...................................................................... $379.95
775A..................................................................(90° Drill with Pan American Nova® Head)......................................................... $319.95

ATS ANGLE AIR DRILLS

• Spindle 1/4”-28 Thread

• Head Length 1.08” (27 mm)
• 2,800 RPM
• Head Width .65” (16 mm)
• 33 hp (.25 kw)
• 10” (254 mm) Overall Length
• Variable speed control

This is the drill you need to get into those tight spaces. It has a head height of just over an inch, and produces enough torque at 2800 RPM
to drill through steel. Excellent speed control, and has a solid, well-balanced feel.
ATS6131.................................................................................. (45° Angle Drill)............................................................................... $259.95
ATS6132.................................................................................. (90° Angle Drill)............................................................................... $259.95

54 800-248-0638 AIRCRAFT TOOL SUPPLY www.aircraft-tool.com

 DRILLING EQUIPMENT
90° SNAKE DRILL ATTACHMENT 90° ANGLE DRILL KIT

Our 602 snake attachment consists of the A601 angle drill attach-
ment, a 30” snake cable, and an adapter. The snake is removable
to permit the use of the angle drill portion. Drill capacity is 1/4”.
602.................................................................................... $299.95

One of the most versatile tools on the market today. This kit includes
our 602 snake attachment giving you 30” of cable.
90° HEAVY-DUTY SNAKE DRILL ATTACHMENT Complete kit consists of:
• 1/4-28 Threads • Collet Adapter
• Tool Case • 90° Angle Drill (A601)
• 24” Flexible Attachment • Straight Drill Attachment
• 4 Threaded Drill Bits, 40, 30, • 4 Collets, 40, 30, 21, and 12
21, 12 • Complete Instructions
6012KT.............................................................................. $349.95

360° HEAVY-DUTY SNAKE DRILL ATTACHMENT

Designed with a heavy-duty flexible casing and core assembly for

longevity. Fits any air or electric drill. Accepts 1/4” x 28 threaded drill
bits and other accessories for close quarter drilling. Dimensions are
30” snake length, 1-1/4” head height, and 3/8” side to center. Drill
capacity is 1/4”.
N63................................................................................... $235.95

Ideal for drilling in areas inaccessible to regular 90° angle tools.

Made of heavy-duty flexible casing and core assembly. Swivels 360°
and can be locked into eight different positions. Accepts 1/4” x 28
threaded drill bits and accessories for close quarter drilling. Dimen-
sions are 30” snake length, 1-1/4” head height 1-7/16” offset dis-
ANGLED DRILL ATTACHMENTS tance, 3/8” side to center. Drill capacity is 1/4”.
N634................................................................................. $460.95

FLAT OFFSET DRILL ATTACHMENT

345 One of a kind drill attach-
ment. Designed with a
head thickness of only
7/16” for drilling in areas
as close as 1”. Fits any air
or electric drill. Accepts
A601 1/4-28 threaded drill bits
and accessories for close
quarter drilling. Dimensions
Fits any air or electric drill. Accepts 1/4” x 28 threaded drill bits and are 6-5/8” long, 7/16” head
other accessories for close quarter drilling. Dimensions are 7-1/2” thickness, 2-5/16” offset dis-
long, 1-3/16” head height 3/8” side to center. Drill capacity is 1/4”. tance, 7/16” side to center.
345.......................................... (45o).................................. $209.95 Drill capacity is 1/4”.
A601....................................... (90o).................................. $125.95 T235.................................................................................. $275.95

800-248-0638 AIRCRAFT TOOL SUPPLY www.aircraft-tool.com 55

 DRILLING EQUIPMENT
BOELUBE® DIAMOND DUST PLASTIC DRILL BIT
Boelube® is a specially formu-
lated lubricant patented by
Boeing Aerospace. Use it on drill
bits, reamers, saw blades, taps Diamond Dust Coated plastic drill bits provide superior cutting ac-
and dies, boring tools, and any tion in Plexiglas, polycarbonates, and acrylics. They have a 60 de-
other application where smooth gree point and a 0 degree rake that prevents the drill from walking
cutting action is required. The or “breaking out” as with ordinary drill bits. They will not chip, crack,
application of a small amount or gum up the material. Use to drill stacks or singles, with or without
of Boelube, which is consumed masking. Ideal for drilling mounting holes, or crack stopping holes in
in the metalworking process, will windshields and canopies.
greatly improve tool life, surface
finish, and hole quality. Recom- DDPD-1/8................................(1/8”)......................................$3.05
mended for use on aluminum, DDPD-3/16.............................(3/16”).....................................$3.95
titanium, inconel, stainless steel, DDPD-1/4................................(1/4”)......................................$3.95
graphite, composites, Kevlar, and wood. Can also be used with
other ferrous and non-ferrous metals.
BL70200-13........................(1.6oz Stick).................................$4.95 PLEXIGLAS DRILL BITS
BL90................................... (4oz Liquid).................................$9.95
BL70104H............................(Drill Lube)................................$10.95
BL70307L.............................(4oz Paste)...............................$11.95 Made of high-speed steel. 90° point, 0° rake. Jobbers length. Slow
spiral makes it ideal for drilling Plexiglas, acrylic, and polycarbonate.

PART DIAMETER DEC. FLUTE PRICE

AC55-1/8 1/8” 0.1250 1-5/8” $3.95
PROFESSIONAL AUTOMATIC CENTER PUNCH AC55-5/32 5/32” 0.1562 2” $4.95
AC55-3/16 3/16” 0.1875 2-5/16” $4.95
GT79 AC55-1/4 1/4” 0.2500 2-3/4” $4.95
AC55-5/16 5/16” 0.3125 3-1/8” $6.95
AC55-3/8 3/8” 0.3750 3-5/8” $8.95
GT89 AC55-7/16 7/16” 0.4375 4-1/16” $12.95
AC55-1/2 1/2” 0.5000 4-1/2” $15.95
001A

An Automatic Center Punch is the standard in automatic center

punches. It is tough enough to mark hard metals, yet not overbear- AIRCRAFT TAPERED ROUTER BITS
ing when working with aluminum skin, or thin-walled tubing. Replace-
able steel point avaible.
GT79.................................(Professional)..............................$27.95
GT79P.......................... (Replacement Point)..........................$3.95 Used for cutting, trimming and routing. 1/4” per foot taper.
GT89............................... (Stainless Steel)............................$15.95
PART SHANK DIAMETER (IN.) LENGTH PRICE
001A...................................(Economy).................................$8.95
910-1 .081-.098 2” $4.95
910-2 .110-.128 2-1/4” $5.95
910-3 .165-.1875 2-1/2” $7.95
910-4 .224-.250 2-3/4” $9.95
NOXON® HAMMERLESS PUNCH

It’s a brilliant idea: PLASTIC EDGE SCRAPER

connect a prick
punch and a cen-
ter punch to each
end of a powerful
spring to produce the ultimate punch. Just place the working end
on any surface, pull the striking end straight back and release. The This unique tool has four features in one. Not only will it remove saw
prick punch marks lightly, while the center punch creates a deeper marks from flat edges, it also bevels thick and thin material, and will
indentation for drill starts. radius the edge quickly and evenly.
32R00-1..............................................................................$12.95 CES01..................................................................................$11.95

56 800-248-0638 AIRCRAFT TOOL SUPPLY www.aircraft-tool.com

 DRILLING EQUIPMENT

Cobalt Drill Bits

ATS now carries a full selection in jobber, threaded, and aircraft lengths.

Surface Finish
Color tempered finish
enables easy identification of
cobalt drills.

135° Split
Point Cobalt Alloyed
The cobalt formula im-
Enables accu-
proves abrasive and heat
rate positioning
resistance, for increased
and less drilling
strength at higher drilling
pressure.
temperatures.

What everyone has been waiting for! You know the story, you purchase a drill bit and then
discover you should have bought a few more. Save yourself the time and money and buy
cobalt drill bits in packs of six or twelve bits. Volume discounts are available as well. This addi-
tion to our product line is surely one you will want to take advantage of.
Visit www.aircraft-tool.com for our full line of drill bits.
E-mail quotes@aircraft-tool.com for special pricing

COBALT DRILL INDEX 115 PIECE COBALT DRILL INDEX

These drill bits are made

from cobalt steel for in-
creased durability. Standard
135-degree chisel point is
recommended for station-
ary drilling applications and
they’re ideal for drilling in
tough materials like stainless
steel, titanium, and inconel.
The set comes in a metal
index case for convenient
storage and transportation. Each of these 115 cobalt drill bits comes organized in a metal in-
All sizes are straight shank. dexed storage case for easy transport to your work site. With ag-
gressive 135 degree tips, these cobalt drills bits not only last longer
but also cut faster than your standard high speed steel bits! This set
012-C60N......................(#1-60 Wire Size)...........................$89.95 contains numbered bits: 1-60, lettered bits A-Z, and fractional bits
012-C29F................... (1/16-1/2” Fractional)....................... $95.95 1/16-1/2 by 64ths. All bits are cobalt jobber length drill bits.
012-C26A........................(A-Z Letter Sizes)...........................$95.95 012-C115........................ (Complete Set)..........................$275.95

800-248-0638 AIRCRAFT TOOL SUPPLY www.aircraft-tool.com 57

 DRILLING EQUIPMENT
COBALT JOBBER LENGTH BITS
Cobalt jobber drill bits are used for drilling in tough materials like
Stainless steel, Titanium, and Inconel. They are made to NAS907
Type J specifications and have a 135° split point flute. Bright finish.

PART SIZE DEC PRICE PART SIZE DEC PRICE PART SIZE DEC PRICE
012-55 55 .0520 $1.25 012-21 21 .1590 $1.85 012-M M .2950 $4.95
012-54 54 .0550 $1.25 012-20 20 .1610 $1.85 012-19/64 19/64 .2969 $3.95
012-53 53 .0595 $1.25 012-19 19 .1660 $2.05 012-N N .3020 $4.95
012-1/16 1/16 .0625 $1.25 012-18 18 .1695 $2.05 012-5/16 5/16 .3125 $4.95
012-52 52 .0635 $1.25 012-11/64 11/64 .1719 $1.85 012-O O .3160 $4.95
012-51 51 .0670 $1.25 012-17 17 .1730 $2.05 012-P P .3230 $4.95
012-50 50 .0700 $1.25 012-16 16 .1770 $2.25 012-21/64 21/64 .3281 $4.95
012-49 49 .0730 $1.25 012-15 15 .1800 $2.25 012-Q Q .3320 $4.95
012-48 48 .0760 $1.25 012-14 14 .1820 $2.25 012-R R .3390 $4.95
012-5/64 5/64 .0781 $1.25 012-13 13 .1850 $2.25 012-11/32 11/32 .3438 $4.95
012-47 47 .0785 $1.25 012-3/16 3/16 .1875 $2.05 012-S S .3480 $5.95
012-46 46 .0810 $1.25 012-12 12 .1890 $2.25 012-T T .3580 $5.95
012-45 45 .0820 $1.25 012-11 11 .1910 $2.25 012-23/64 23/64 .3594 $5.95
012-44 44 .0860 $1.25 012-10 10 .1935 $2.05 012-U U .3680 $5.95
012-43 43 .0890 $1.25 012-9 9 .1960 $2.25 012-3/8 3/8 .3750 $5.95
012-42 42 .0935 $1.25 012-8 8 .1990 $2.25 012-V V .3770 $6.95
012-3/32 3/32 .0938 $1.25 012-7 7 .2010 $2.25 012-W W .3860 $6.95
012-41 41 .0960 $1.35 012-13/64 13/64 .2031 $2.25 012-25/64 25/64 .3906 $6.95
012-40 40 .0980 $1.35 012-6 6 .2040 $2.55 012-X X .3970 $7.95
012-39 39 .0995 $1.35 012-5 5 .2055 $2.55 012-Y Y .4040 $7.95
012-38 38 .1015 $1.35 012-4 4 .2090 $2.55 012-13/32 13/32 .4063 $6.95
012-37 37 .1040 $1.55 012-3 3 .2130 $2.55 012-Z Z .4130 $7.95
012-36 36 .1065 $1.55 012-7/32 7/32 .2188 $2.25 012-27/64 27/64 .4219 $7.00
012-7/64 7/64 .1094 $1.55 012-2 2 .2210 $2.55 012-7/16 7/16 .4375 $7.95
012-35 35 .1100 $1.55 012-1 1 .2280 $2.55 012-29/64 29/64 .4531 $8.95
012-34 34 .1110 $1.55 012-A A .2340 $2.85 012-15/32 15/32 .4688 $8.95
012-33 33 .1130 $1.55 012-15/64 15/64 .2344 $2.55 012-31/64 31/64 .4844 $8.95
012-32 32 .1160 $1.25 012-B B .2380 $3.05 012-1/2 1/2 .5000 $9.95
012-31 31 .1200 $1.25 012-C C .2420 $3.05
COBALT DRILL PACKS
012-1/8 1/8 .1250 $1.55 012-D D .2460 $3.05
012-30 30 .1285 $1.25 012-1/4 1/4 .2500 $2.85 Buy
012-29 29 .1360 $1.85 012-E E .2500 $2.85 in 6 and
012-28 28 .1405 $1.85 012-F F .2570 $3.95 12 packs
012-9/64 9/64 .1406 $1.55 012-G G .2610 $3.95 to save up to
012-27 27 .1440 $1.85 012-17/64 17/64 .2656 $3.95 40%
012-26 26 .1470 $1.85 012-H H .2660 $3.95
012-25 25 .1495 $1.85 012-I I .2720 $3.95
012-24 24 .1520 $2.05 012-J J .2770 $3.95
012-23 23 .1540 $2.05 012-K K .2810 $3.95
012-5/32 5/32 .1563 $1.85 012-9/32 9/32 .2813 $3.95 Visit www.aircraft-tool.com
012-22 22 .1570 $2.05 012-L L .2900 $3.95 to see full selection.

58 800-248-0638 AIRCRAFT TOOL SUPPLY www.aircraft-tool.com

 DRILLING EQUIPMENT
6” AIRCRAFT EXTENSION DRILL BITS

Aircraft extension drill bits are designed to resist bending and buckling under torsional loads, which makes them perfect for unsupported
drilling into deep areas. They are manufactured to NAS 907 Type B and type J specifications. Great for drilling aluminum and mild steel.
Constructed of M-2 high speed steel for the best combination of strength, heat resistance, and wear resistance. Black oxide coating resists
corrosion. 135 degree split point ensures a true start and eliminates bit walking.

PART SIZE DEC PRICE PART SIZE DEC PRICE PART SIZE DEC PRICE
013-55 55 .0520 $4.95 013-24 24 .1520 $3.95 013-G G .2610 $8.95
013-54 54 .0550 $4.95 013-23 23 .1540 $3.95 013-17/64 17/64 .2656 $6.95
013-53 53 .0595 $4.95 013-5/32 5/32 .1563 $3.95 013-H H .2660 $7.95
013-1/16 1/16 .0625 $3.05 013-22 22 .1570 $3.95 013-I I .2720 $8.95
013-52 52 .0635 $3.05 013-21 21 .1590 $3.95 013-J J .2770 $8.95
013-51 51 .0670 $3.05 013-20 20 .1610 $3.95 013-K K .2810 $8.95
013-50 50 .0700 $3.05 013-19 19 .1660 $3.95 013-9/32 9/32 .2813 $7.95
013-49 49 .0730 $3.05 013-18 18 .1695 $3.95 013-L L .2900 $9.95
013-48 48 .0760 $3.05 013-11/64 11/64 .1719 $3.95 013-M M .2950 $9.95
013-5/64 5/64 .0781 $3.05 013-17 17 .1730 $3.95 013-19/64 19/64 .2969 $8.95
013-47 47 .0785 $3.05 013-16 16 .1770 $3.95 013-N N .3020 $10.95
013-46 46 .0810 $3.05 013-15 15 .1800 $3.95 013-5/16 5/16 .3125 $7.95
013-45 45 .0820 $3.05 013-14 14 .1820 $3.95 013-O O .3160 $11.95
013-44 44 .0860 $3.05 013-13 13 .1850 $3.95 013-P P .3230 $11.95
013-43 43 .0890 $3.05 013-3/16 3/16 .1875 $3.95 013-21/64 21/64 .3281 $9.95
013-42 42 .0935 $3.05 013-12 12 .1890 $3.95 013-Q Q .3320 $11.95
013-3/32 3/32 .0938 $2.95 013-11 11 .1910 $3.95 013-R R .3390 $11.95
013-41 41 .0960 $3.05 013-10 10 .1935 $3.95 013-11/32 11/32 .3438 $9.95
013-40 40 .0980 $3.05 013-9 9 .1960 $3.95 013-S S .3480 $12.95
013-39 39 .0995 $3.05 013-8 8 .1990 $3.95 013-T T .3580 $12.95
013-38 38 .1015 $3.05 013-7 7 .2010 $3.95 013-23/64 23/64 .3594 $9.95
013-37 37 .1040 $3.05 013-13/64 13/64 .2031 $3.95 013-U U .3680 $12.95
013-36 36 .1065 $3.05 013-6 6 .2040 $3.95 013-3/8 3/8 .3750 $11.95
013-7/64 7/64 .1094 $3.95 013-5 5 .2055 $3.95 013-V V .3770 $13.95
013-35 35 .1100 $2.95 013-4 4 .2090 $3.95 013-W W .3860 $12.95
013-34 34 .1110 $3.05 013-3 3 .2130 $3.95 013-25/64 25/64 .3906 $13.95
013-33 33 .1130 $3.05 013-7/32 7/32 .2188 $3.95 013-X X .3970 $10.95
013-32 32 .1160 $3.05 013-2 2 .2210 $3.95 013-Y Y .4040 $13.95
013-31 31 .1200 $3.05 013-1 1 .2280 $3.95 013-13/32 13/32 .4063 $10.95
013-1/8 1/8 .1250 $3.95 013-A A .2340 $4.95 013-Z Z .4130 $14.95
013-30 30 .1285 $3.95 013-15/64 15/64 .2344 $4.95 013-27/64 27/64 .4219 $9.95
013-29 29 .1360 $3.95 013-B B .2380 $4.95 013-7/16 7/16 .4375 $11.95
013-28 28 .1405 $3.95 013-C C .2420 $4.95 013-29/64 29/64 .4531 $13.95
013-9/64 9/64 .1406 $3.95 013-D D .2460 $4.95 013-15/32 15/32 .4688 $14.95
013-27 27 .1440 $3.95 013-1/4 1/4 .2500 $4.95 013-31/64 31/64 .4844 $14.95
013-26 26 .1470 $3.95 013-E E .2500 $4.95 013-1/2 1/2 .5000 $15.95
013-25 25 .1495 $3.95 013-F F .2570 $5.95

800-248-0638 AIRCRAFT TOOL SUPPLY www.aircraft-tool.com 59

 DRILLING EQUIPMENT
12” AIRCRAFT EXTENSION DRILL BITS

Aircraft extension drill bits are designed to resist bending and buckling under torsional loads, which makes them perfect for unsupported
drilling into deep areas. They are manufactured to NAS 907 Type B and type J specifications. Great for drilling aluminum and mild steel.
Constructed of M-2 high speed steel for the best combination of strength, heat resistance, and wear resistance. Black oxide coating resists
corrosion. 135 degree split point ensures a true start and eliminates bit walking.

PART SIZE DEC PRICE PART SIZE DEC PRICE PART SIZE DEC PRICE
014-55 55 .0520 $8.05 014-24 24 .1520 $4.95 014-G G .2610 $5.95
014-54 54 .0550 $8.95 014-23 23 .1540 $4.95 014-17/64 17/64 .2656 $8.95
014-53 53 .0595 $8.95 014-5/32 5/32 .1563 $3.95 014-H H .2660 $10.95
014-1/16 1/16 .0625 $5.95 014-22 22 .1570 $4.95 014-I I .2720 $10.95
014-52 52 .0635 $8.95 014-21 21 .1590 $4.95 014-J J .2770 $10.95
014-51 51 .0670 $8.95 014-20 20 .1610 $4.95 014-K K .2810 $10.95
014-50 50 .0700 $3.95 014-19 19 .1660 $4.95 014-9/32 9/32 .2813 $8.95
014-49 49 .0730 $3.95 014-18 18 .1695 $4.95 014-L L .2900 $10.95
014-48 48 .0760 $3.95 014-11/64 11/64 .1719 $3.95 014-M M .2950 $10.95
014-5/64 5/64 .0781 $3.95 014-17 17 .1730 $4.95 014-19/64 19/64 .2969 $8.95
014-47 47 .0785 $3.95 014-16 16 .1770 $5.95 014-N N .3020 $11.95
014-46 46 .0810 $3.95 014-15 15 .1800 $4.95 014-5/16 5/16 .3125 $10.95
014-45 45 .0820 $3.95 014-14 14 .1820 $4.95 014-O O .3160 $12.95
014-44 44 .0860 $3.95 014-13 13 .1850 $5.95 014-P P .3230 $12.95
014-43 43 .0890 $3.95 014-3/16 3/16 .1875 $4.95 014-21/64 21/64 .3281 $10.95
014-42 42 .0935 $3.95 014-12 12 .1890 $4.95 014-Q Q .3320 $12.95
014-3/32 3/32 .0938 $3.95 014-11 11 .1910 $4.95 014-R R .3390 $13.95
014-41 41 .0960 $3.95 014-10 10 .1935 $4.95 014-11/32 11/32 .3438 $10.95
014-40 40 .0980 $3.05 014-9 9 .1960 $5.95 014-S S .3480 $14.95
014-39 39 .0995 $3.95 014-8 8 .1990 $4.95 014-T T .3580 $14.95
014-38 38 .1015 $3.95 014-7 7 .2010 $4.95 014-23/64 23/64 .3594 $11.95
014-37 37 .1040 $3.95 014-13/64 13/64 .2031 $4.95 014-U U .3680 $14.95
014-36 36 .1065 $3.95 014-6 6 .2040 $4.95 014-3/8 3/8 .3750 $11.95
014-7/64 7/64 .1094 $4.95 014-5 5 .2055 $4.95 014-V V .3770 $14.95
014-35 35 .1100 $3.95 014-4 4 .2090 $4.95 014-W W .3860 $14.95
014-34 34 .1110 $3.95 014-3 3 .2130 $4.95 014-25/64 25/64 .3906 $12.95
014-33 33 .1130 $3.95 014-7/32 7/32 .2188 $4.95 014-X X .3970 $15.95
014-32 32 .1160 $3.95 014-2 2 .2210 $4.95 014-Y Y .4040 $15.95
014-31 31 .1200 $3.95 014-1 1 .2280 $4.95 014-13/32 13/32 .4063 $12.95
014-1/8 1/8 .1250 $3.95 014-A A .2340 $4.95 014-Z Z .4130 $16.95
014-30 30 .1285 $3.95 014-15/64 15/64 .2344 $4.95 014-27/64 27/64 .4219 $14.95
014-29 29 .1360 $4.95 014-B B .2380 $4.95 014-7/16 7/16 .4375 $15.95
014-28 28 .1405 $4.95 014-C C .2420 $4.95 014-29/64 29/64 .4531 $14.95
014-9/64 9/64 .1406 $4.95 014-D D .2460 $4.95 014-15/32 15/32 .4688 $17.95
014-27 27 .1440 $4.95 014-1/4 1/4 .2500 $5.95 014-31/64 31/64 .4844 $17.95
014-26 26 .1470 $4.95 014-E E .2500 $4.95 014-1/2 1/2 .5000 $17.95
014-25 25 .1495 $4.95 014-F F .2570 $5.95

60 800-248-0638 AIRCRAFT TOOL SUPPLY www.aircraft-tool.com

 DRILLING EQUIPMENT
COBALT THREADED DRILL BITS

Lb

1/4-28 threaded shank. Cobalt-M35 with black oxide finish. 135° Split point. NAS965 Type D standards.

SHORT (Lb = 1-1/4”) SUPER STUBBY (Lb = 3/8”)

PART SIZE (D) DEC PRICE PART SIZE (D) DEC PRICE
5000-3/32 3/32 .0938 $2.25 5000-40SS 40 .0980 $3.95
5000-40 40 .0980 $1.95 5000-30SS 30 .1285 $3.95
5000-1/8 1/8 .1250 $2.25
5000-30 30 .1285 $1.85
LONG (Lb = 2-1/8”)
5000-29 29 .1360 $2.25
5000-27 27 .1440 $2.25 PART SIZE (D) DEC PRICE
5000-5/32 5/32 .1563 $2.35 5000-3/32L 3/32 .0938 $2.85

5000-21 21 .1590 $1.95 5000-40L* 40 .0980 $2.25

5000-20 20 .1610 $2.35 5000-1/8L 1/8 .1250 $2.85

5000-19 19 .1660 $2.35 5000-30L 30 .1285 $2.25

5000-16 16 .1770 $2.45 5000-29L 29 .1360 $2.85

5000-13 13 .1850 $2.45 5000-27L 27 .1440 $2.85

5000-3/16 3/16 .1875 $2.45 5000-5/32L 5/32 .1563 $2.85

5000-12 12 .1890 $2.05 5000-21L* 21 .1590 $2.85

5000-11 11 .1910 $2.45 5000-19L 19 .1660 $2.85

5000-10 10 .1935 $2.55 5000-3/16L 3/16 .1875 $3.05

5000-7 7 .2010 $2.55 5000-12L* 12 .1890 $2.55

5000-6 6 .2040 $2.55 5000-11L 11 .1910 $3.05

5000-5 5 .2055 $2.55 5000-10L* 10 .1935 $3.05

5000-1 1 .2280 $2.55 5000-7/32L 7/32 .2188 $3.05

5000-D D .2460 $2.55 5000-1/4L 1/4 .2500 $3.05

5000-1/4 1/4 .2500 $3.05 *Replacement bits for our 1341A and 1341S rivet removal tools.

EXTRA LONG (Lb = 2-5/8”)

PART SIZE (D) DEC PRICE
STUBBY (Lb = 5/8”)
5000-1/8XL 1/8 .1250 $2.55
PART SIZE (D) DEC PRICE
5000-30XL 30 .1285 $3.95
5000-3/32S 3/32 .0938 $2.85
5000-21XL 21 .1590 $3.95
5000-40S 40 .0980 $2.75
5000-40XL 40 .0980 $3.95
5000-30S 30 .1285 $2.85
5000-10XL 10 .1935 $4.95
5000-29S 29 .1360 $2.85
5000-27S 27 .1440 $2.85
5000-5/32S 5/32 .1563 $2.75 THREADED DRILL BITS 4-PACK
5000-21S 21 .1590 $2.75
5000-19S 19 .1660 $2.85 Package of four (4) 1/4-28
5000-3/16S 3/16 .1875 $3.05 Threaded Drill Bits in sizes: #40,
#30, #21, and #12. Cobalt
5000-12S 12 .1890 $3.05
steel with black oxide finish.
5000-10S 10 .1935 $3.05
5000-1/4S 1/4 .2500 $3.95 4PCBITS.................................................................................$6.95

800-248-0638 AIRCRAFT TOOL SUPPLY www.aircraft-tool.com 61

 DRILLING EQUIPMENT
CHUCKING REAMERS
High speed steel straight flute chucking reamers are made with a
diameter tolerance of: +.0002 -.0000

PART SIZE (D) DEC FLUTE (L1) OAL (L) PRICE PART SIZE (D) DEC FLUTE (L1) OAL (L) PRICE
RMR-3/32 3/32 .0938 7/8 3-1/2 $9.95 RMR-9 9 .1960 1-1/4 5 $10.25
RMR-40 40 .0980 7/8 3-1/2 $9.95 RMR-8 8 .1990 1-1/4 5 $10.25
RMR-39 39 .0995 7/8 3-1/2 $12.95 RMR-7 7 .2010 1-1/4 5 $10.25
RMR-38 38 .1015 7/8 3-1/2 $9.95 RMR-13/64 13/64 .2031 1-1/4 5 $10.95
RMR-37 37 .1040 7/8 3-1/2 $9.95 RMR-6 6 .2040 1-1/4 5 $10.25
RMR-36 36 .1065 7/8 3-1/2 $9.95 RMR-5 5 .2055 1-1/4 5 $10.95
RMR-7/64 7/64 .1094 7/8 3-1/2 $9.95 RMR-4 4 .2090 1-1/4 5 $10.25
RMR-35 35 .1100 7/8 3-1/2 $9.95 RMR-3 3 .2130 1-1/4 5 $10.25
RMR-34 34 .1110 7/8 3-1/2 $9.95 RMR-7/32 7/32 .2188 1-1/4 5 $10.95
RMR-33 33 .1130 7/8 3-1/2 $9.95 RMR-2 2 .2210 1-1/4 5 $10.25
RMR-32 32 .1160 7/8 3-1/2 $9.95 RMR-1 1 .2280 1-1/2 6 $10.25
RMR-31 31 .1200 7/8 3-1/2 $9.95 RMR-15/64 15/64 .2344 1-1/2 6 $10.25
RMR-1/8 1/8 .1250 7/8 3-1/2 $9.95 RMR-1/4 1/4 .2500 1-1/2 6 $11.95
RMR-30 30 .1285 7/8 3-1/2 $9.95 RMR-9/32 9/32 .2813 1-1/2 6 $10.25
RMR-29 29 .1360 1 4 $9.95 RMR-5/16 5/16 .3125 1-1/2 6 $10.95
RMR-28 28 .1405 1 4 $9.95 RMR-21/64 21/64 .3281 1-1/2 6 $10.95
RMR-9/64 9/64 .1406 1 4 $9.95 RMR-11/32 11/32 .3438 1-1/2 6 $10.95
RMR-27 27 .1440 1 4 $9.95 RMR-3/8 3/8 .3750 1-3/4 7 $10.95
RMR-26 26 .1470 1 4 $9.95 RMR-27/64 27/64 .4219 1-3/4 7 $11.50
RMR-25 25 .1495 1 4 $9.95 RMR-7/16 7/16 .4375 1-3/4 7 $11.95
RMR-24 24 .1520 1 4 $9.95 RMR-33/64 33/64 .5156 2 8 $19.50
RMR-23 23 .1540 1 4 $9.95 RMR-1/2 1/2 .5000 2 8 $13.95
RMR-5/32 5/32 .1563 1 4 $9.95
COBALT REAMER SET
RMR-22 22 .1570 1 4 $9.95
An indexed set of straight flute
RMR-21 21 .1590 1-1/8 4-1/2 $18.95
cobalt reamers ground to a toler-
RMR-20 20 .1610 1-1/8 4-1/2 $9.95 ance of 0.0001 inches. Ideal for
RMR-19 19 .1660 1-1/8 4-1/2 $9.95 sizing holes prior to bolt installation
RMR-18 18 .1695 1-1/8 4-1/2 $9.95
and other application requiring
precise hole tolerances. Works
RMR-11/64 11/64 .1719 1-1/8 4-1/2 $9.95 with aluminum, steel, and other
RMR-17 17 .1730 1-1/8 4-1/2 $9.95 metals of medium hardness.
RMR-16 16 .1770 1-1/8 4-1/2 $9.95
RMR-15 15 .1800 1-1/8 4-1/2 $9.95
RMR-14 14 .1820 1-1/8 4-1/2 $9.95
RMR-13 13 .1850 1-1/8 4-1/2 $9.95
RMR-3/16 3/16 .1875 1-1/8 4-1/2 $10.95
RMR-12 12 .1890 1-1/4 5 $10.95
RMR-11 11 .1910 1-1/4 5 $10.25
RMR-C29F........................ (Fraction Set)............................ $349.95
RMR-10 10 .1935 1-1/4 5 $10.95 RMR-C60N........................ (Number Set)............................$549.95

62 800-248-0638 AIRCRAFT TOOL SUPPLY www.aircraft-tool.com

 DRILLING EQUIPMENT
HAND EXPANSION REAMERS BROWN AND SHARPE TAPERED PIN REAMERS
High Speed Straight
Flutes. Expansion Lim-
its: +/- 0.006”.

DIA # OF FLUTE OVERALL Used to size AN385 and AN386 taper pin holes
PART PRICE
(IN.) FLUTES LEN. LEN (IN.)
DIAMETER OF REAMER
016AR 1/4 6 1-7/16 3-7/8 $94.95 FLUTE
PART LARGE SMALL O.A.L. PRICE
020AR 5/16 6 1-3/4 4 $57.95 LENGTH
024AR 3/8 6 1-3/4 4-1/4 $57.95 END END
028AR 7/16 6 1-3/4 4-1/2 $59.95 BSR-1 .3176 .1974 2-7/8” 4-3/4” $31.95
032AR ½ 6 1-13/16 5 $59.95 BSR-2 .3781 .2474 3-1/8” 5-1/8” $39.95
036AR 9/16 8 2-1/8 5-1/2 $62.95 BSR-3 .4510 .3099 3-3/8” 5-1/2” $36.95
040AR 5/8 8 2-1/2 6 $69.95 BSR-4 .5017 .3474 3-11/16” 5-7/8” $40.95
BSR-5 .6145 .4474 4” 6-3/8” $46.95
BSR-6 .6808 .4974 4-3/8” 6-7/8” $51.95
BSR-7 .8011 .5974 4-7/8” 7-1/2” $51.95
TI-COATED STEP DRILL SET BSR-8 .9770 .7474 5-1/2” 8-1/8” $62.95
BSR-9 1.1530 .8974 6-1/8” 8-7/8” $78.95
These TiN (Titanium Nitrate) coated
BSR-10 1.3370 1.0420 6-7/8” 9-3/4” $104.95
stepped drill bit sets make it easy
to drill 28 hole sizes. Constructed
from high-speed steel, they feature
clearly marked holes sizes and have UNIBIT® DRILL BITS
a titanium finish for long bit life. In-
These amazing drill bits will
cludes 13-Step bit ranging from 1/8
make sheet metal work a
in. to 1/2 in., 6-Step bit ranging from 3/16 in. to 1/2 in., and a 9-Step
snap! One Unibit will drill
bit ranging from 1/4 in. to 3/4 in.
many different size holes.
16503.................................................................................. $16.95 Each step will drill through
16504.............................. (1/4”-3/4” Only)............................$12.95 material up to 1/8” thick.

HAND TAPERED REAMERS PART HOLES RANGE SHANK PRICE

UNIBIT-1 13 1/8”-1/2” 1/4” $26.95
UNIBIT-3 9 1/4”-3/4” 3/8” $39.95
UNIBIT-20 8 9/16”-1.0” 1/2” $48.95
UNIBIT-21 10 13/16”-1-3/8” 1/2” $100.95
UNIBIT-4 12 3/16 - 7/8” 3/8” $59.95
GT131 GT130 UNIBIT-5 10 1/4-1-3/8 1/2” $100.95
Tapered reamers are great for hole enlarging, or deburring. Cuts
steel, brass, aluminum, plastic, and wood.
GT130................................. (T-Handle)................................$11.95 UNIBIT® COBALT STEP DRILL
GT131............................(Straight Handle)...........................$14.95

PILOTED REAMERS

These Cobalt Step Drill Unibit lasts 6X longer than most. M35 grade
Cobalt HSS. Radial concave flute. Speedpoint™ tip. Has laser
marked sizes.

PART DESC HOLE SIZE STEPS INC PRICE

High Speed Piloted Reamers are ideally suited for cleaning and re-
sizing valve guides, Guide Boss, Rocker Arm, and Shaft Bushings; 10231CB #1 1/8”-1/2” 13 1/32” $33.95
and Rocker Shaft Support Base. They are made of high speed tool 10233CB #3 1/4”-3/4” 9 1/16” $59.95
steel and precision ground to your exact specifications. You specify 10234CB #4 3/16”-3/4” 12 1/16” $89.95
size. Available from .3750 thru .5100”.
10239CB #9 7/8”&1-1/8” 2 1/2” & 3/4” $95.95
PRO1...................................................................................$75.95
Note: Please specify reamer size and pilot size when ordering. 10220CB #20 9/16”-1” 8 1/16” $69.95

800-248-0638 AIRCRAFT TOOL SUPPLY www.aircraft-tool.com 63

 DRILLING EQUIPMENT
SHAVIV™ HEAVY DUTY DEBURRING TOOL STRAP DUPLICATORS

B10

B30

B11

B70

All aluminum handle and solid steel construction makes the Shaviv 50 series
HD Deburring Tool the standard in the Tool and Die industry. Sharp
deburring blades cleanly removes burrs from aluminum, steel, and
plastics. Includes B10 and B20 blades. 60 series
70 series
SVBHD............(Deburring Tool with B10 & B20 Blades)..........$16.95
SV-B10............................(Standard Blade).............................$1.95 For drilling duplicate matching holes in overlapping sheets. Drill
SV-B20....................(Heavy Duty Version of B10)....................$1.95 Guide Duplicators lets you drill directly by using the duplicator as a
SV-B11.................. (Small Hole Deburring Blade)...................$2.05 drill guide.
SV-B30............... (Two-Way Internal/External Blade)................$2.25 6” CAPACITY 12” CAPACITY 18” CAPACITY
SV-B70............ (Carbide Sheet Metal Edge Scraper).............$7.95 SIZE TYPE
P/N PRICE P/N PRICE P/N PRICE
SVB2........................(Economy Deburring Tool).....................$4.95
40 punch 51 $14.95 51-12 $18.95 51-18 $29.95
30 punch 52 $14.95 52-12 $18.95 52-18 $29.95
21 punch 53 $14.95 53-12 $18.95 53-18 $29.95
ATS SPEED DEBURRING TOOL 12 punch 55 $14.95 55-12 $18.95 55-18 $29.95
40 drill 61 $10.95 61-12 $14.95 61-18 $24.95
30 drill 62 $10.95 62-12 $14.95 62-18 $24.95
21 drill 63 $10.95 63-12 $14.95 63-18 $24.95
12 drill 65 $10.95 65-12 $14.95 65-18 $24.95
Deburr holes fast and easy with 40 inverted 71 $10.95 71-12 $14.95 71-18 $24.95
speed handle. 30 inverted 72 $10.95 72-12 $14.95 72-18 $24.95
SP275A.......................... (8” OAL “Stubby”)..........................$18.95 21 inverted 73 $10.95 73-12 $14.95 73-18 $24.95
12 inverted 75 $10.95 75-12 $14.95 75-18 $24.95
SP375A......................... (10” OAL Standard).........................$18.95
SP375-1.................. (Replacement Cutter Tips).....................$9.95

AVERY SPEED DEBURRING TOOL

TWO-WAY DEBURRING TOOL Swivel action makes de-

burring and countersink
holes fast and easy. Mold-
ed handle with 2” long
plated steel shaft with
1/4”-28 threaded holder.
Includes (1) 3/8” X 100° 3-flute burring cutter and 8” extension shaft
for deburring the inside of flanges and other areas.
Deburrs the front, back or both AE1046........................................ ........................................$34.95
sides of a hole in one pass. Works AE1050.................... (3 Flute Burring Cutter Bit)....................$17.95
with any drill. Adjusts easily to con-
trol the depth of cut.
STUBBY DEBURRING TOOL
PART HOLE SIZE LENGTH PRICE Compact deburring tool easily
reaches tight areas. Sharp cut-
TD001 3/32” 3-3/8” $134.95
ting head removes burrs from
TD002 1/8” 3-3/8” $105.95
tubing up to 3/4” ID, as well as
TD003 5/32” 3-3/8” $100.95
drilled holes in sheet metal up
TD004 3/16” 3-3/8” $110.95
to 1/2” diameter.
TD005 1/4” 3-3/8” $115.95
GT196.................................................................................$11.95

64 800-248-0638 AIRCRAFT TOOL SUPPLY www.aircraft-tool.com

 DRILLING EQUIPMENT
DRILL HOUSING AND BUSHINGS DUPLICATING/TRANSFER PUNCH

Used to mark holes in overlapping sheets. Overall length of 3-1/2”.

PART SIZE PRICE P/N SIZE PRICE
TP-40 40 $8.95 TP-21 21 $7.95
TP-30 30 $8.95 TP-10 10 $7.95

A hand held guide to keep drills and taps 90° to flat or curved
surfaces. The guide assembly is a transparent plastic housing
that allows you to view your work as you drill. And the hardened
steel bushing (must be ordered separately) securely guides the DRILL EXTENSION
bit as you drill. The bushings can be interchanged in one housing.
DH01............................ (Drill Housing Only).........................$10.95
DB-40............................. (40 Drill Bushing)............................ $7.95
DB-30............................. (30 Drill Bushing)............................ $7.95
DB-21............................. (21 Drill Bushing)............................ $7.95
Used to extend drill bits, pilot cutters, etc. Has a 1/4” shank on one
DB-10............................. (10 Drill Bushing)............................ $7.95
end to fit into a chuck, and a 1/4” x 28 internal thread at the other.
DB-1/4...........................(1/4” Drill Bushing)........................... $7.95
DH01-KIT....... (Drill Housing & 40, 30, 21, 10 Bushings).........$39.95 382....................................... (2” Long)...................................$4.95
384....................................... (4” Long)...................................$6.95
387....................................... (7” Long)...................................$6.95
3810.................................... (10” Long)..................................$7.95
CHIP CHASER

DUAL THREADED DRILL EXTENSION

All steel construction for long dependable life. Ideal for removing
chips from between metal after drilling rivet holes.
SP2005S............................ (2.5” Stubby)................................$3.95 Used to extend drill bits, pilot cutters, etc. Has a 1/4” x 28 external
SP2005..............................(6” Standard)...............................$4.95 (male) thread on the shank end, and a 1/4” x 28 internal (female)
thread at the other.
SP2005K.............................. (6” & 2.5”)..................................$7.95
T382......................................(2” OAL)....................................$5.95
T384......................................(4” OAL)....................................$6.95
T387......................................(7” OAL)....................................$7.95
HOLE TRANSFER PINS
T3810...................................(10” OAL)...................................$8.95

HEX POWER DRIVER DRILL EXTENSION

Great for aligning overlapping holes. Just place the pin in the hole
of the lower sheet with the point facing up, then place the overlap-
ping sheet in place and tap lightly. Leaves a clear prick point for Used to extend drill bits, pilot cutters, etc. Has a 1/4” Hex Drive on
drilling. Sold in packs of 5. the shank end, and a 1/4” x 28 internal (female) thread at the other.
BHP-1/8...............................(1/8”, 5 pcs)................................$4.95 H382.....................................(2” OAL)....................................$6.95
BHP-5/32............................(5/32”, 5 pcs)...............................$4.95 H384.....................................(4” OAL)....................................$7.95
BHP-3/16............................(3/16”, 5 pcs)...............................$4.95 H387.....................................(7” OAL)....................................$8.95
BHP-1/4...............................(1/4”, 5 pcs)................................$4.95 H3810..................................(10” OAL)...................................$9.95

800-248-0638 AIRCRAFT TOOL SUPPLY www.aircraft-tool.com 65

 DRILLING EQUIPMENT
TWO LUG - DOUBLE WING CORNER WING

DWS DWM
CWS CWM

A C D
SCREW B
PART SPAC- PILOT DRILL PRICE SCREW A C D
SIZE SPACING PART PRICE
ING DIA. SIZE SIZE SPACING PILOT DIA. DRILL SIZE
STANDARD (DWS) STANDARD (CWS)
518A 6 .344 .688 .139 40 $38.95 518R 6 .344 .139 40 $39.95
518B 8 .344 .688 .164 40 $38.95 518S 8 .344 .164 40 $41.95
518C 10 .344 .688 .191 40 $37.95 518T 10 .344 .191 40 $42.95
518D 1/4 .500 1.000 .248 40 $37.95 518U 1/4 .500 .248 40 $41.95
MINIATURE (DWM) MINIATURE (CWM)
518NB 6 .218 .436 .139 40 $41.95 518SB 6 .218 .139 40 $47.95
518NC 8 .234 .468 .164 40 $41.95 518SC 8 .234 .164 40 $47.95
518ND 10 .250 .500 .191 40 $41.95 518SD 10 .250 .191 40 $47.95
518NE 1/4 .281 .562 .248 40 $41.95 518SE 1/4 .281 .248 40 $75.95

ONE LUG - SINGLE WING NUTPLATE INSTALLATION BLOCK

Install nut plates faster, easier, and with
less damage to the surface and paint
with this innovative new product. The Nut
Plate Block will produce a flush nut plate
on the back side and the rivet will be flush
to the skin surface every time. It takes less
SWS
then 1 minute to install a nut plate. Patent
SWM Pending.
CA-NPB10.............................. (10-32)...................................$35.95
CA-NPB8................................. (8-32)....................................$35.95
CA-NPB4................................. (4-40)....................................$35.95
CA-NPB6................................. (6-32)....................................$35.95
CA-NPB-1/4............................(1/4-20)..................................$35.95

SCREW A C D
PART PRICE
SIZE SPACING PILOT DIA. DRILL SIZE
V-BLOCK DRILL GUIDE
STANDARD (SWS)
EDF1
518G 6 .344 .139 40 $37.95 Drilling through the center of round stock
518H 8 .344 .164 40 $38.95 can be a daunting task without the right
518J 10 .344 .191 40 $37.95 tool. The precision drill guide makes easy
518K 1/4 .344 .248 40 $37.95 work of it by securely holding the stock in
MINIATURE (SWM) its cradle to stop the tube from rolling or
slipping as you drill.
518PB 6 .218 .139 40 $42.95
518PC 8 .234 .164 40 $41.95
518PD 10 .250 .191 40 $41.95
CIT01................................... (Center It)................................$15.95
518PE 1/4 .281 .248 40 $41.95
EDF1................................... (Drill Rite™)...............................$62.95

66 800-248-0638 AIRCRAFT TOOL SUPPLY www.aircraft-tool.com

 DIE GRINDERS & SANDERS
ATS MINI BELT SANDER ATS COMPACT FINGER SANDER

• 360º Head Rotation

• Uses 3/8” x 13” (10 x 330 mm) Belts
• 16,000 RPM
• 11-3/16” (284 mm) Overall Length
• Built-in Regulator
• 1.76 lbs (.8 kg)
• 15,000 RPM Free Speed
7.0 CFM Removing old paint and corrosion from channels, tracks, • 2.375” x. 825”(60x21mm) pad size
and other tight areas is always a challenge. But this sander will make • Orbital diameter 3mm
your life easier. It’s narrow enough to get into hard-to-reach areas, • Heavy duty orbital head
and powerful enough to make short work of it. Ideal for use on all • 9-7/16” (240 mm) Overall Length
composite type aircraft projects or contouring and finishing molds • 2.2 lbs (1 kg)
and jigs. • 7.0 CFM
ATS4501A............................................................................$95.95 This tool is great for removing paint and corrosion in narrow, con-
87885........................ Belts (3/8” x13”) 60 Grit......................$15.95 fined areas such as seat tracks, or guide rails. High speed orbital
87886........................ Belts (3/8” x13”) 80 Grit......................$15.95 action quickly removes material while giving you total control. Uses
87887....................... Belts (3/8” x13”) 100 Grit..................... $15.95 standard adhesive-backed sandpaper.
*Belts are in packages of 5. ATS4103A.......................................................................... $169.95

ATS HEAVY DUTY JITTERBUG SANDER ATS HD RANDOM ORBITAL SANDER

WITH VACUUM COLLECTOR

• Free Speed 10,000 RPM

• Head Length 1.08” (2.7 mm)
• Free Speed 8,000 osc/min • 5” or 6” (127 or 152mm) Disc Size
• 6-11/16” (170mm) Overall Length • 2.4 lbs (1.1 kg)
• Pad Size 3-3/4” x 9” (93 x 228mm) • 4-25/32” (121mm) Overall Length
• 4.33 lbs (1.97kg) weight • Includes vacuum hose and bag
• 8.5 CFM • 7.0 CFM
Our jitterbug sander provides the ultimate balance of power and Excellent high speed finishing sander cuts very quickly and features
controllability. Ideally suited for paint removal and surface prepara- an internal self-generated vacuum system to remove debris as you
tion work. sand.
ATS4211..............................................................................$65.95 ATS4201V.................. (6” Hook and Loop Pad)................... $145.95

800-248-0638 AIRCRAFT TOOL SUPPLY www.aircraft-tool.com 67

 DIE GRINDERS & SANDERS
ATS REAR EXHAUST EXTENDED DIE GRINDERS ATS 17 PIECE MICRO DIE GRINDER KIT

These grinders combine all the features of a well engineered die

grinder with the extra reach needed to get into tight areas. They
have full ball bearing construction for exceptionally smooth running
action. The rear exhaust system vents air away from the work area
and prevents contamination from blowing debris.

• 25,000 RPM Free Speed • 1/4” (6.4 mm) Collet Size

• Rear Exhaust •.3 HP (.22 kw) A complete rear exhaust micro die grinder kit features a powerful
ATS253E...........................(3” Die Grinder).......................... $129.95 die grinder and a collection of stones in various shapes and sizes.
ATS255E...........................(5” Die Grinder).......................... $145.95 Also included in the kit are:
• 1 - Mini Oiler • 10 - Grinding Stones
• 1 - Set of spanners • 1 - 1/4” Air Connector
Micro Die Grinder Specifications: 54,000 RPM Free Speed, 1/8”
ATS MINI DIE GRINDERS
(3mm) Collet Size, 5-3/8” (137mm) overall length, .44 lbs (.2 kg)
weight, rear exhaust.
ATS5001K........................................................................... $115.95

ATS HIGH SPEED MICRO DIE GRINDER

The very high speed and pencil-thin form factor makes this die
grinder the perfect tool to do detailed grinding, polishing, or drill-
ing in all types of metals and composites. Ball bearing construction
gives it a remarkably smooth and quiet operation.
• 1/8” (3 mm) Collet Size • Rear Exhaust
At only 6” long, our Mini Die Grinders are small enough to fit comfort- • 60,000 RPM Free Speed • Very light weight .48 lbs (.22 kg)
ably in your hand, yet has all of the speed and power of the bigger • 5.86” (149 mm) OAL • Full 1 year warranty
models. Manufactured from top quality parts and features full ball ATS5023..............................................................................$95.95
bearing supports. Use it with rotary files, or Scotch-Brite Roloc discs
to shape and polish your work.

• 1/4” (6.4 mm) Collet size• • Front exhaust cleans work area Need more information about a product?
• 2hp (.15 kw) horsepower • Full 1 year warranty
Visit our website at www.aircraft-tool.com to find out
PART STYLE RPM WEIGHT PRICE more about our tools. There you’ll find complete descrip-
ATS5101 Straight 26,000 .79 lbs (.36 kg) $79.95 tions, plus additional pictures and videos of our products.
ATS5105 Angle 20,000 1.1 lbs (.5 kg) $85.95 You may also call us at 1-800-248-0638 to speak to one
ATS5107 115 Degree 20,000 1.1 lbs (.5 kg) $89.95 of our representatives if you require more specific help.

68 800-248-0638 AIRCRAFT TOOL SUPPLY www.aircraft-tool.com

 DIE GRINDERS & SANDERS
CYLINDER SHAPE CARBIDE BURRS (TYPE SA) TREE SHAPE POINTED CARBIDE BURRS (TYPE SG)

SINGLE CUT DOUBLE CUT SINGLE CUT DOUBLE CUT

SIZE SIZE
PART PRICE PART PRICE PART PRICE PART PRICE
1/4 x 5/8 SA-S1 $11.95 SA-D1 $11.95 1/4 x 5/8 SG-S1 $13.95 SG-D1 $13.95
3/8 x 3/4 SA-S3 $16.95 SA-D3 $16.95 3/8 x 3/4 SG-S3 $14.95 SG-D3 $14.95
1/2 x 1 SA-S5 $18.95 SA-D5 $18.95 1/2 x 1 SG-S5 $20.95 SG-D5 $20.95
5/8 x 1 5/8 x 1
SA-S6 $24.95 SA-D6 $24.95 SG-S6 $26.95 SG-D6 $26.95
3/4 x 1 3/4 x 1
SA-S7 $26.95 SA-D7 $50.95 SG-S7 $41.95 SG-D7 $41.95

CYLINDRICAL RADIUS END CARBIDE BURRS (TYPE SC) FLAME SHAPE CARBIDE BURRS (TYPE SH)

SINGLE CUT DOUBLE CUT SINGLE CUT DOUBLE CUT

SIZE SIZE
PART PRICE PART PRICE PART PRICE PART PRICE
1/4 x 5/8 SC-S1 $10.95 SC-D1 $10.95 1/4 x 5/8 SH-S1 $25.95 SH-D1 $16.95
3/8 x 3/4 SC-S3 $11.95 SC-D3 $13.95 5/16 x 3/4 SH-S2 $13.95 SH-D2 $13.95
1/2 x 1 SC-S5 $18.95 SC-D5 $18.95 1/2 x 1-1/4 SH-S5 $20.95 SH-D5 $20.95
5/8 x 1 5/8 x 1-7/16
SC-S6 $24.95 SC-D6 $24.95 SH-S6 $47.95 SH-D6 $47.95
3/4 x 1 3/4 x 1-5/8
SC-S7 $38.95 SC-D7 $38.95 SH-S7 $64.95 SH-D7 $64.95

BALL SHAPE CARBIDE BURRS (TYPE SD) 90° TAPER SHAPE CARBIDE BURRS (TYPE SK)

SINGLE CUT DOUBLE CUT SINGLE CUT DOUBLE CUT

SIZE SIZE
PART PRICE PART PRICE PART PRICE PART PRICE
1/8 SD-S11 $9.95 SD-D11 $9.95 1/4 x 1/8 SK-S1 $10.95 SK-D1 $10.95
1/4 SD-S1 $11.95 SD-D1 $11.95 3/8 x 3/16 SK-S3 $13.95 SK-D3 $13.95
3/8 SD-S3 $12.95 SD-D3 $12.95 1/2 x 1/4 SK-S5 $16.95 SK-D5 $17.95
1/2 5/8 x 5/16
SD-S5 $18.95 SD-D5 $18.95 SK-S6 $38.95 SK-D6 $39.95
5/8 3/4 x 3/8
SD-S6 $21.95 SD-D6 $21.95 SK-S7 $25.95 SK-D7 $25.95

OVAL SHAPE CARBIDE BURRS (TYPE SE) CONE SHAPE CARBIDE BURRS (TYPE SM)

SINGLE CUT DOUBLE CUT SINGLE CUT DOUBLE CUT

SIZE SIZE
PART PRICE PART PRICE PART PRICE PART PRICE
1/4 x 3/8 SE-S1 $14.95 SE-D1 $13.95 1/4 x 1/2 SM-S1 $11.95 SM-D1 $11.95
3/8 x 5/8 SE-S3 $14.95 SE-D3 $14.95 1/4 x 3/4 SM-S2 $11.95 SM-D2 $11.95
1/2 x 7/8 SE-S5 $19.95 SE-D5 $20.95 1/4 x 1 SM-S3 $13.95 SM-D3 $13.95
5/8 x 1 1/2 x 7/8
SE-S6 $25.95 SE-D6 $26.95 SM-S5 $20.95 SM-D5 $20.95
3/4 x 1 5/8 x 1
SE-S7 $35.95 SE-D7 $38.95 SM-S6 $28.95 SM-D6 $28.95

TREE SHAPE RADIUSED CARBIDE BURRS (TYPE SF) INVERTED CONE SHAPE CARBIDE BURRS (TYPE SN)

SINGLE CUT DOUBLE CUT SINGLE CUT DOUBLE CUT

SIZE SIZE
PART PRICE PART PRICE PART PRICE PART PRICE
1/4 x 3/4 SF-S1 $12.95 SF-D1 $12.95 1/4 x 5/16 SN-S1 $11.95 SN-D1 $11.95
3/8 x 3/4 SF-S3 $15.95 SF-D3 $15.95 3/8 x 3/8 SN-S2 $12.95 SN-D2 $12.95
1/2 x 1 SF-S5 $25.95 SF-D5 $24.95 1/2 x 1/2 SN-S4 $19.95 SN-D4 $19.95
5/8 x 1 5/8 x 3/4
SF-S6 $33.95 SF-D6 $33.95 SN-S6 $30.95 SN-D6 $30.95
3/4 x 1 3/4 x 5/8
SF-S7 $38.95 SF-D7 $38.95 SN-S7 $43.95 SN-D7 $43.95

800-248-0638 AIRCRAFT TOOL SUPPLY www.aircraft-tool.com 69

 DIE GRINDERS & SANDERS
SOLID CARBIDE ROTARY BURR SET ATS HIGH SPEED CUT-OFF TOOL

A complete set of 1/4” shank rotary burrs

designed to shape and trim steel, cast
iron, and other ferrous metals. Also ideal
for use with composite materials. Can
be used with any die grinder or high
speed drill. Each set contains a selec-
tion of nine cylindrical (Type-SA) and tree
shaped (Type-SF) carbide burrs suitable
for most applications. Comes complete
with case. Not recommended for use
on aluminum. 16413

CB-S9........................... (9pcs - 1/4” Shank).........................$59.95 Perfect for cutting and trimming studs and bolts. Features a safety
hood to protect against flying debris. 3” (75 mm) disc capacity, 3/8”
(15 mm) mount. Free speed 20,000 RPM. Weight 1.74 lbs (.79 kg).
CARBIDE BURR SET FOR ALUMINUM ATS8502.............................(Cutoff Tool)..............................$49.95
16413.................... (Arbor for 1/4” & 3/8” Holes)....................$6.95
This set of 1/4” shank carbide
burrs is specifically designed to
REINFORCED CUT-OFF WHEELS
cut aluminum and other non-
ferrous metals without galling or Premium quality cut-off wheels
loading up. Includes one each: has high cut rates and long life.
SA-3NF & SA-5NF cylindrical, SC- Provides top level grinding for
3NF & SC-5NF radiused cylindri- fiberglass, stainless steel, mild
cal, SD-5NF ball, SF-5NF tree ta- steel, and alloys. 25,000 maxi-
per, and SL-3NF tapered. mum RPM. Type-1 Grade 60 Alu-
CB-A9........................... (8pcs - 1/4” Shank).........................$85.95 minum Oxide suitable for all met-
als except Titanium.
Always use an approved face shield when using any style of cut-off
wheels.
1/8” SHANK 50 PCS DIAMOND GRINDING BITS
PART QTY SIZE PRICE
Diamond bits are ideally suited MG90-3-2 5 2”x1/32”x3/8” $8.95
for hard materials such as glass, MG90-3-3 5 3”x1/32”x3/8” $8.95
ceramics, and carbon compos- MG90-3-4 5 4”x1/32”x3/8” $10.95
ites. Contains a variety of the
most popular sizes and shapes, MINI GRINDER
such as: ball, cylinder, taper, in-
verted cone, radius end, discs,
and more. Includes a molded • Mini-Grinder
plastic case. • 2 pcs diamond bits
• 2 pcs grinding stones
WT4999-9915.............. (50pcs - 1/8” Shank)........................$29.95
• 2 pcs sanding bands
• 1 pc collet (Ø 2.4/ Ø3.2 mm)
• 1 pc nylon brush
• 1 pc engraving bit
DIAMOND MOUNTED POINT SETS • 1 pc connective post for
sanding band
Mounted diamond point sets
range in diameter from 1/16”
to 5/16” in an assortment of This mini grinder has low vibration, high torque and lightweight eco-
shapes. Useful for trimming, nomically designed. The naturally and comfortable operation body
hole resizing, precision fitting, shape makes it easy to complete all of the finishing touches on
etching, etc. Works best with your project. The quick-change chuck is ideal for drilling, polishing
hard materials such as glass, ceramics, and carbon composites. engraving, routing, shaping, sanding and milling.
WT4999-9910.............. (10pcs - 1/4” Shank)..........................$6.95
WT4999-9900.............. (20pcs - 1/8” Shank)..........................$8.95 PT-5201A.............................................................................$25.95

70 800-248-0638 AIRCRAFT TOOL SUPPLY www.aircraft-tool.com

 SURFACE PREP TOOLS
ATS SURFACE CONDITIONING KIT MINI ORBITAL DETAIL SANDER

Includes the following:

• 1 - Coarse Surface Prep Disc
• 10 - 80 Grit Sanding Discs
• 1 - Medium Surface Prep Disc
• 10 - 100 Grit Sanding Discs
• 1 - Fine Surface Prep Disc
• 10 - 120 Grit Sanding Discs

A complete sanding and finishing kit that contains a high speed

angle sander plus an assortment of 3” sanding discs and surface
preparation pads. Sander Specifications: 18,000 RPM Free Speed, • Free speed 7,500 rpm • Weight 1.42 lbs (.66 kg)
3” (76mm) Pad Size, 4-23/32” (120mm) overall length, 1.49 lbs (.68 • .3HP Air motor • Length 6-5/8” (168 mm)
kg) weight. • Orbit dia .060” (1.5 mm
ATS4106K........................................................................... $135.95 The perfect sander for targeted corrosion removal, spot repair of
paint jobs, and general finesse sanding of small areas. Front exhaust
allows continuous cooling of gear box which extends the life of the
ATS RIVET SPOT SAND BLASTER tool. Includes a 1-1/4” (30mm) diameter hook and loop (velcro).

This sand blaster is self-con- ATS4115P............................................................................. $69.95

tained and gets down to the
bare metal. Ideal for sand- Hook and Loop Sanding Disc sold in packs of 10.
blasting rivets to remove PART NUMBER GRIT PRICE
corrosion and oxidation. The
ATS4115P-HL............. (H&L Replacement Pad)...................$5.95
abrasive is re-circulated, no
mess to clean up. Contains 4 4115-100V-10 100 $3.95
rubber nozzles for flat surfac- 4115-180V-10 180 $3.95
es, panel edges, and inside
and outside corners. Oper- 4115-220V-10 220 $3.95
ates on 60 PSI. 4115-320V-10 320 $3.95
ATS201................................................................................$39.95 4115-400V-10 400 $3.95
4115-600V-10 600 $3.95
4115-800V-10 800 $3.95
SANDING DETAILER KIT
4115-1000V-10 1000 $3.95
4115-1200V-10 1200 $3.95
4115-1500V-10 1500 $3.95
PSA Sanding Disc sold in packs of 10.
ATS4115P-PSA........... (PSA Replacement Pad)...................$5.95
4115-60-PSA 60 $2.95
12301 4115-120-PSA 120 $2.95

Ideal for finishing those hard to reach areas. It’s spring loaded to 4115-240-PSA 240 $2.95
put tensions on the abrasive belt. Included in this standard kit is one 4115-400-PSA 400 $2.95
each of four various grits. Replacement belts available online at
www.aircraft-tool.com

PART NUMBER GRIT PRICE For more information about our

12301 Standard Coarser Grits $21.95 products, visit our website
www.aircraft-tool.com.
12302 Standard Finer Grits $21.95

800-248-0638 AIRCRAFT TOOL SUPPLY www.aircraft-tool.com 71

 SURFACE PREP TOOLS
NYLON CHISEL SCRAPER SET SCOTCH-BRITE™ HAND PADS

Available in various grades to

cover all jobs ranging from light
deburring to fine polishing. Each
pack consists of 20 pads. Pad
size is 6” x 9”.

Titan 4-piece nylon scraper sets are designed to gently but effec-
tively scrape and remove decals, emblems, body moldings, gas-
kets, and debris without damaging surfaces. These scrapers are PART DESCRIPTION PKG. COLOR PRICE
made from a durable nylon plastic material that absorbs hammer QTY.
blows and can be sharpened with a file. 6444 Extra Duty 20 Brown $31.95
11565.................................................................................. $13.95 6448 Light Duty 20 Dark Gray $32.95
7445 Light Duty Cleansing 20 White $29.95
7447 General Purpose 20 Maroon $31.95
7448 Ultra-Fine 20 Light Gray $31.95
MULTI WEDGE INTERIOR AND EXTERIOR PANEL TOOL
961H Twist-Lok Pad Holder $7.95

SCOTCH-BRITE™ HAND PAD TRIAL PACK

These multi-wedge pry tool sets are specially designed to gently

remove seals, instrument panels, air vents, door panels, door locks,
seal levels, and more. These tools feature different wedge shapes
that allow you to get under and lift pieces away without damaging
delicate surfaces.
15048..................................... (6 pc).....................................$9.95
A convenient pack of assorted 6”x 9”” hand pads lets you decide
which product is right for your application. Each pack contains one
of the following:
SCRAPER SET WITH NON-MARRING BLADES • Scrubbing Sponge. • Cleansing pad ( 7445)
• TWIST-LOK pad holder ( 961) • Blending Pad ( 7446)
• Extra duty pad ( 6444) • General purpose pad ( 7447)
• Light duty pad ( 6448) • Ultra fine pad ( 7448)
• Heavy duty pad ( 7440)
961S....................................................................................$31.95

PILOTED BONDING BRUSH

This tool is a razor scrapper which also includes a set of non-mar- Stainless steel brush used to clean
ring blades. The razor scrapper is effective for removing decals, tail away corrosion and paint buildup.
numbers, warning placards, and other markings which must be 1/4” shank and 1/2” diameter.
scrapped off on painted surfaces. The non-marring blade does a
similar job but will not damage painted or plastic surfaces. So you PART PILOT PRICE P/N PILOT PRICE
get the best of both worlds with one tool. 06721 3/32” $18.95 06781 3/16” $18.95
17008................................ (Scraper Set)..............................$12.95 06741 1/8” $18.95 06801 1/4” $20.95
12038......................... (Non-Marring Blades).........................$3.95 06761 5/32” $18.95

72 800-248-0638 AIRCRAFT TOOL SUPPLY www.aircraft-tool.com

 SURFACE PREP TOOLS
3M ROLOC™ DISC PADS 3M SCOTCH-BRITE™ ROLOC DISCS

For use with 3M Roloc™ discs.

The pads are made of medium
grade rubber and has a female
thread to accept any standard
1/4x20 threaded shaft.

RLP2..............................(2” Pad and Shaft).........................$21.95

RLP3..............................(3” Pad and Shaft).........................$28.95
RLTS................................ (Threaded Shaft).............................$3.95 Scotch-Brite™discs are excellent for general purpose surface fin-
ishing. They provide a burr-free surface suitable for painting or fine
polishing. Use them to remove light corrosion, oxides, and coatings.
3M™ STRIPE-OFF GRAPHICS REMOVAL WHEEL Sold in packs of five discs.

PART GRADE DIA. PRICE (5 PCS)

SBD05528 A CRS 2” $9.95
SBD05532 A CRS 3” $10.95
SBD05527 A MED 2” $10.95
SBD05531 A MED 3” $13.95
SBD05523 A VFN 2” $9.95
SBD05530 A VFN 3” $13.95
SBD05522 S SFN 2” $10.95
SBD05529 S SFN 3” $14.95
The 3M Stripe-Off Graphics Removal Wheel is great for removing
stripes, decals, or tail numbers from airplanes without damag-
ing the paint finish. Comes ready to use in any air or electric drill.
Includes complete instructions. 4” dia x 5/8” wide. PAINT CUTTERS
3M7498............................................................................... $42.95

3M GRAPHICS REMOVAL DISC

Graphics removal discs provide the best

WITHOUT PAINT WITH PAINT
way to remove vinyl decals, graphics, PA36-5XX
CUTTER CUTTER
tapes, films and adhesives. Their unique
construction assures a long life and al-
lows easy conforming to contours. Be-
cause the discs are flexible and have
no sharp edges, they will not damage
underlying paint. 4” Dia. x 3/8” wide. Re- PA36-666
quires 1 Roloc Holder.
You know how frustrating it can be to remove a painted over screw
only to wind up chipping up the paint job. But you wouldn’t have
GRD1..................................................................................$25.95 that problem if you had a set of these innovative paint cutters. They
work by slicing through the paint around the head of the screw so
you can remove it without chipping the paint. They have a 1/4-28
3M 6” CUT AND POLISH WHEEL thread to fit into any angle drill, or you can get the optional arbor for
use in a drill chuck.

PART DESCRIPTION PRICE

3M Cut and Polish wheel, Medium PA36-511 4 Screw Paint Cutter $24.95
Grade, 6” Diameter x 1” wide x PA36-512 6 Screw Paint Cutter $24.95
1/2” arbor hole. Perfect for deburr- PA36-513 8 Screw Paint Cutter $24.95
ing and blending aluminum. PA36-514 10 Screw Paint Cutter $24.95
PA36-517 1/4” Screw Paint Cutter $24.95
PA36-666 Optional Paint Cutter Arbor $6.95
PA36-SET Set of all 5 cutters and Arbor $116.95
CP7AM.............................................................................. $100.95

800-248-0638 AIRCRAFT TOOL SUPPLY www.aircraft-tool.com 73

 CLEANING & POLISHING
CYCLO 5-PRO MARK II POLISHER

The Model 5-Pro, Mark II is a variable speed

version of the Model 5 and also offers a 3 year
warranty, plus all the balancing weights (blue,
yellow and silver). This tool is equipped with
ProGuard Orbital Backing Plates for attaching
loop backed foam or wool pads.
Its innovative design eliminates the two main
problems that plague rotary polishers: heat
build-up that can cause visible burns, goug-
es and swirls, and vibration. The synchronized
movement of the Cyclo Polisher’s dual orbiting
heads effectively mirrors the overlapping, cir-
cular motion of fine hand polishing. The result
is a mirror-like finish without swirl marks or risk of
damage to paint.

CYCLO5-PRO.................................................................................(Bonnet).................................................................................... $405.95

ORBITAL BACKING PLATE CYCLO WOOL PADS

The Cyclo Toolmakers ProGuard Orbital Backing Plate features per-

manently adhered high quality dense hook material (the same ma- Wool pads are typically used to apply polish and to blend out
terial we use on the Rubber Pad Holders). This provides a much bet- scratches and marks before finishing.
ter mating hook and much more area of hook material CY72-455............................................................................$37.95
CY79-112............................................................................ $37.95
CYCLO FOAM BONNETS AND VELCRO PADS

CYCLO CLEANING BRUSHES

Brushes allows you to use your

Cyclo as a cleaning and scrub-
bing tool. Attaches directly to
Foam pads are ideal for applying polishes, sealants, and buffing
any Cyclo Polisher unit. 2 brush-
compounds. They are also superb for fine polishing.
es per package.
PART COLOR DESCRIPTION PRICE

Velcro (For use with CYCLO5-RPH)

CY72-110 White Super Fine Finishing Pad (x4) $16.95 PART COLOR DESCRIPTION PRICE
CY72-115 Blue Ex Fine Buffing/Finishing Pad (x4) $16.95 CY76-810 Gray Ultra Soft Upholstery Brush $45.95
CY72-120 Green Buffing Pad (x4) $16.95 CY76-830 Aqua Shampoo Brush $41.95
CY72-135 Yellow Blending/Polishing (x4) $19.95 CY76-840 White Carpet Brush $41.95
CY72-145 Orange Scratch Removal/Blending (x4) $19.95 CY76-870 Black Scrubbing Brush $41.95

74 800-248-0638 AIRCRAFT TOOL SUPPLY www.aircraft-tool.com

 CLEANING & POLISHING
BUG BLASTER MET-ALL® DETAILING POLISHING KIT

For use on aircraft, autos, RVs, boats, and motorcy-

cles. Quickly remove bugs without leaving a residue.
Just spray, wait and wipe. Bug Blaster instantly attacks
bug proteins and acids. Safe on all exterior surfaces
including: Plexiglas, acrylic, glass, clear coat or poly-
urethane paints, etc. Bug Blaster is completely bio-
degradable. 8 oz.
3MBB1008..........................................$7.95

EXTREME SIMPLE GREEN

MET-ALL’s Detail Polishing Kit will produce a show room finish on bare
Extreme Simple Green’s aircraft cleaning product,
metal, painted surfaces and fiberglass using a variety of Met-All pol-
cuts through tough, built up grease, oil, dirt, pollution,
ishes and premium bonnets. Each bonnet features a recessed loop
insect residue, and impact soils. Simple Green will
back so the edge of the pad, as well as its face, can be used ef-
not cause harm to aircraft structural metals, plastics,
fectively with less concern for scuffing or marring the finish.
paints, or coatings.
MDPKIT................................................................................$37.95

ESGAC32..........................................$14.95

MET-ALL® PREP AND ULTRA POLISH

WINDSHIELD CLEANER
“Best Aluminum
These cleaners are specially formu- cleaner/polisher I
lated for aircraft transparencies. They have ever used. It
contain no wax or solvents. Winbright also leaves a finish
that is easy to keep
is a professional strength spray with clean” ~ J Anderson
Micro-Brighteners that leave surfaces
sparkling clear and clean without resi-
due. All Kleer cleans as well as leaves MA-P37 MA-P100
a thin coating to protect against dirt,
A complete two-stage solution to the perfect finish. First, use the
and smudges.
Prep Polish to remove roughness. It’s thorough cutting action clears
3MWIN008 AK8 away years of oxidation and readies the surface for finish polishing.
Next, buff to a mirror-like finish with super-smooth Ultra Polish. Ultra
3MWIN008..........................(WinBright)................................$11.95
Polish also restores optical clarity to acrylics, as well as removes fine
AK8.......................................(All Kleer)...................................$5.95 scratches in painted surfaces.
MA-P37.......................... (16 oz Prep Polish)..........................$12.95
MICRO-MESH™ AIRCRAFT WINDOW RESTORATION KIT MA-P100........................(16 oz Ultra Polish)..........................$18.95
MA-UPC.............(16 oz Prep & Ultra Polish Combo)..............$29.95

MET-ALL® ALUMINUM AND STAINLESS STEEL POLISH

Painted or unpainted, MET-ALL’s Alumi-
num and Stainless Steel polish keeps
your aluminum and steel surfaces
shining bright. Special protective
agents remove and prevent oxida-
tion. It’s non-abrasive, environmental-
ly safe formula guards against water
The micromesh system uses a series of fine sanding cloths and pol- spots and maintains luster. Non-toxic
ishing compounds to restore optical clarity and luster to even the and non-flammable. Effective in re-
most weather damaged windshield. Use it to restore cockpit visibility moving accumulated surface dirt
to like new condition. and stains from anodized aluminum.
KR-70....................... (Restores up to 30 Sq. Ft.)................... $27.95 MA-BP2.............................. (2.5 oz Tube)................................$4.95
HP-100..................... (Restores up to 60 Sq. Ft.)....................$48.95 MA-TC10............................. (16 oz Can)...............................$10.95
3MG8..................(Polish & Scratch Remover 8oz)................$10.95 MA-TC20............................. (32 oz Can)...............................$19.95

800-248-0638 AIRCRAFT TOOL SUPPLY www.aircraft-tool.com 75

 FABRIC & COMPOSITES
MAULE FABRIC TESTER TITANIUM NON-STICK SCISSORS

Test fabric on your airplane for minimum FAA requirements without

removing or punching holes in the fabric. Accurately calibrated in
pounds (ranges from 25 to 80 pounds). Stainless steel construction. Precision Straight Bent Shears
Comes in a protective case.
315.................................................................................... $541.95 PART DESCRIPTION PRICE
18540 4” Titanium Non-Stick Precision Scissors $6.95
18541 5” Titanium Non-Stick Precision Scissors $9.95
6 1/2” SPRING ACTION SNIP 18542 7” Titanium Non-Stick Straight Scissors $12.95
18543 8” Titanium Non-Stick Straight Scissors $15.95
18544 8” Titanium Non-Stick Bent Shears $15.95
18545 9” Titanium Non-Stick Bent Shears $18.95

Short and narrow blades make for easy access in tight, hard to
reach areas. One blade is serrated for nonslip cutting action! Excel-
lent for cutting Kevlar. FLORIAN ROTARY PINKER™

743........................................ (6 1/2”)...................................$27.95
744........................................ (6 3/4”)...................................$30.95 The Florian Rotary Pinker™
has been proven since
the mid-1930’s. Makes one
WISS 8.25” PINKING SHEARS continuous pinked edge
with comfortable right or
left hand use. Easily pinks
the most intricate patterns
with a light and compact
touch. One year warranty.

FL12.................................................................................. $100.95
The Wiss 8-1/4 in. pinking shears pinks and cuts reducing the amount
of labor. The sawtooth blade design reduces the time spent finishing
edges on fabrics. The shears leaves a ruffled edge that will not fray.
BENT EXTREME EDGE TITANIUM BONDED SHEARS
CB8.....................................................................................$47.95

MICRO-TIP THREADCLIP

Titanium bonded shears are 3 times harder than stainless steel so

they stay sharper longer. The blades will resists chemicals, adhesives
and corrosion, and the bent ergonomic handles are designed to
Can´t reach those threads to snip? Now you can with this micro-tip reduce stress while cutting to minimize fatigue. Ideal for cutting fab-
solid steel ball-bearing style thread clip. Auto spring return action rics such as canvas, upholstery material and leather. Includes hex
leaves your other hand free to handle material. Attractive chrome key tool for adjusting tension to the type of material you need to cut.
finish with soft blue insert for comfort. 18523....................................... (8”).....................................$17.95
VP38....................................(With Grip)................................$19.95 18524....................................... (9”).....................................$21.95
HTC-5............................... (Without Grip).............................$13.95 18527...................................... (11”)....................................$26.95

76 800-248-0638 AIRCRAFT TOOL SUPPLY www.aircraft-tool.com

 FABRIC & COMPOSITES
ARCH PUNCH SET 6 3/4” UPHOLSTERY SHEAR

Light, large synthetic handles and stainless steel blades are excel-
lent for trimming fabric material. One blade serrated. For both right
or left handed use. 6 3/4’’ overall length, 1 3/4’’ cut length. Fabric,
Seven-piece Arch Punch Set is ideal for punching round holes in
furniture making, sewing.
gasket material, leather, rubber, canvas, cardboard, plastic, sheet
metal and other soft materials. Made of heat-treated forged steel 545......................................................................................$11.95
with an inside taper for clearance. Hole diameters: 1/4 in., 3/8 in.,
1/2 in., 5/8 in., 3/4 in., 7/8 in. and 1 in. Includes Plastic roll pouch.
GT1271ST............................................................................$75.95

UTILITY GROMMET KITS

REVOLVING PUNCH PLIERS

Each easy-to-use set includes a hardened steel hole cutter, a

matched mandrel/anvil pair, a hardwood backer block and an as-
sortment of grommets. We offer three kit sizes (1/4”, 1/2 and 3/8”) as
well as the option to purchase additional grommets.
A convenient spring tension, self opening tool for punching round GT71260.................................(1/4”)......................................$7.95
holes in leather, plastic, rubber, canvas and similar materials. GT71262.................................(3/8”)......................................$8.95
Punches holes: 5/64”, 3/32”, 7/64”, 1/8”, 5/32”, & 3/16”.
GT71264.................................(1/2”)......................................$8.95
722........................................................................................$9.95 GT1261-0................ (24 Refill 1/4” Grommets)......................$1.95
GT1261-2................ (12 Refill 3/8” Grommets)......................$3.05
GT1261-4................ (12 Refill 1/2” Grommets)......................$4.95

GASKET PUNCH SET 10PC

6 PIECE HOLLOW STEEL PUNCH SET

This professional gasket punch set offers everything you will need
to effortless punch holes in gasket material, leather, canvas, card-
board and soft sheet metal . This 10 piece kit features nine hard-
This hollow steel punch set provides tools for making various sized
ened and tempered punches and a self-centering steel mandrel.
holes, includes 3/16”, 1/4”, 5/16”, 3/8”, 7/16”, and 1/2” hole punches
The set includes gasket punch sizes 1/4, 5/16, 3/8, 7/16, 1/2, 5/8, 3/4, in a plastic roll pouch. The punch works on leather, rubber, gasket
7/8, and 1 inch. The entire gasket punch set is packaged in a fitted material, cardboard and softer metals. The internal punch features
plastic case for easy storage. a side clearance hole for easy removal of punched material.
GTS1274.............................................................................. $57.95 GT1280ST............................................................................$42.95

800-248-0638 AIRCRAFT TOOL SUPPLY www.aircraft-tool.com 77

 SHEET METAL TOOLS
DAGGER PANEL BEATER AND DOLLY KIT HARDWOOD SLAPPERS

The most widely used selec- Leather covered wooden

tion of panel beaters and slappers are perfect for quick
dollies for most metal shap- metal shaping without mar-
ing needs, professional grade ring the surface. Use it with
tools in a molded plastic box. a leather shot bag to rough
Each hammer is color-coded form shapes prior to finishing.
for either shrinking (blue) or
stretching (red) forming tasks. PART SHAPE STYLE FACE LENGTH FACE WIDTH PRICE
The three panel beaters in-
DTSLP1 Gentle 8-1/2” 2-1/4” $67.95
cluded are the dinging, shal-
DTSLP2 Medium 8-1/2” 2-1/4” $69.95
low-domed face, and pick
DTSLP3 Flat 8” 2-1/4” $67.95
hammer combo. The dollies
included are the thin toe, utility, curved, and heel shapes, providing
the user with the best combination kit on the market.
DTCP07K............................................................................ $167.95 SHEET METAL HAMMERS

ROUND SHOT BAGS

Heavy duty shot bags are made

from .070”/.090” top grain cow-
hide for extended life, and to
produce a blemish-free metal
Heat-treated, dropped forged steel dollies and hammers. Fiberglass
surface. Approximately 1-1/2” to
hammer handles with non-slip grip. Includes: bumping hammer,
2” when filled.
pick and finish hammer, reverse curve hammer, utility dolly, double
DTSB8............................... (8” Diameter).............................$27.95 end dolly, shrinking dolly, curve dolly, blow mold case.
DTSB12............................ (12” Diameter)............................$39.95
PART DESCRIPTION PRICE
15084 7 pc Sheet Metal Hammer Set $46.95
15079 Straight Finishing Hammer $6.95
SQUARE SHOT BAG 15080 Shrinking Hammer $7.95
15081 Pick Finishing Hammer $7.95
Heavy-duty leather bag filled with 2-1/2 lbs. of
15082 8 oz Rubber Mallet $4.95
shot. Used to stretch and form metal without
15085 Heel Dolly $7.95
nicks or gouges. 4” wide by 6” long.
15086 Wedge Dolly $7.95
55115...............................................$49.95 15087 General Purpose Dolly $7.95

BOSSING MALLETS
SPOON DOLLY
For use in hard to reach High quality bossing mallets are
places. 14”L x 2-1/2”W x lightweight, resistant to wear,
1”H. Wt. 4-3/4 lbs. and feature non-marring poly-
55150..................................................................................$53.95 ethylene heads. When used
with a shot bag, the simplest to
very complex shapes can be
roughed out and finished with
either a planishing hammer or
SLAPPING SPOON english wheel.
The large polished surface
PART SMALL RADIUS LARGE RADIUS HEAD DIA. PRICE
provides a broad face to
quickly and evenly work the DTSBM11 7/16” 1” 2” $30.95
metal. 4” x 2”, Wt. ¾ lbs. DTSBM12 1/2” 1-1/4” 2-1/2” $35.95
55501..................................................................................$27.95 DTSBM13 1/2” 1-1/2” 3” $41.95

78 800-248-0638 AIRCRAFT TOOL SUPPLY www.aircraft-tool.com

 SHEET METAL TOOLS
HOLE FLANGING TOOL EDGE MARKER BLOCK

Excellent for flanging light-

ening holes or overlapping
sheets. Won’t mar material.
Flanges straight or curved
edges up to 1” deep.

FT100..................................................................................$15.95
This handy device holds a making pen and has an adjustable guide
that runs along the edge of a part. The guide allows variable edge
MALCO REDLINE® HAND CRIMPER distance for rivet layout. One thumb screw holds the pen and the
other screw holds the adjustable stop. Comes ready to use with one
Pilot marking pen.
AE6352................................................................................$21.95
New 5 blade style crimps
more evenly. Has 1-1/4” jaw EDGE ROLLING TOOL
depth. Full 20 gauge ca-
For pre-bending skin edges on lap joints
pacity. 9” Overall length.
and butt joints before riveting. “Edge
rolling” will prevent skin edges from
curling up during riveting. Machined
round body made from 2024 alumi-
C5R.........................(5 Blade Double Crimper)....................$37.95 num. Black anodized finish for wear re-
sistance. Ball bearing style nylon rollers
SC-1.........................(3 Blade Single Crimper)..................... $24.95
and a spare set of rollers included.
AE1042................................................................................$24.95
SHEET METALJOGGING TOOL
AE1040........................... (Spare Rollers-2).............................$3.95

LAP JOINT JOGGLE TOOL

Fits any rivet gun with a .401 shank and forms

a perfect 90 degree jog approximately 1/2
inch wide. Ideal for forming sheet metal re-
pair patches or to flush mount full sheets.

Use for lap joint and inspection hole joggles in aluminum skins up
to .032” thick. Steel handle with adjustment slots and precision ball
bearing rollers. Adjustable for set back (width of joggle) and for dif-
91625..................................................................................$62.95 ferent material thickness.
AE465..................................................................................$59.95
TITANIUM BONDED SNIP
AVERY HOLE FLANGING TOOL
A leader in the field due to
its Titanium Bonding which
provides a surface 3x harder
than untreated steel. This al-
lows the snip to stay sharper
up to 3x longer. Precision
ground edges on the blades ensure a tight grip on each cut for su-
perior cutting quality. Corrosion and adhesive resistant. Cuts straight,
notches and wide curves. For plumbing, heating, air conditioning
and roofing trades. Non-slip cushion handles for comfort and con-
trol. Perfect for cutting low carbon cold rolled steel. For forming flanges around lightening holes. Made from 2024 alu-
18476....................................... (7”)..................................... $17.95 minum and hard black anodized. Ball bearing style rollers. Comes
18477...................................... (10”)....................................$20.95 with spare set of rollers.
18478...................................... (12”)....................................$24.95 AE1041................................................................................$18.95

800-248-0638 AIRCRAFT TOOL SUPPLY www.aircraft-tool.com 79

 SHEET METAL TOOLS
MINI OFFSET SNIPS WISS METALMASTER® AVIATION SNIPS

With an overall length of only 7-1/8 inches (181 mm), the AVsMini™
easily goes to work in tight or awkward spaces where full-size aviation
snips are challenged. A 3/4 inch (19 mm) length of cut provides the • Ideal for cutting tight curves or intricate patterns in sheet metal
optimum speed for confined cutting applications where this small, • Fine serrated jaws require very little (if any) cleanup after cutting
maneuverable snip excels. Forged steel jaws with precision-ground • Cuts up to 18ga (.049”) aluminum or steel
serrations on the lower blade produce a sharply defined edge for
Wiss Metalmaster® snips were originally developed for cutting ex-
cutting accuracy and control.
tremely tough alloys used in the aircraft industry. The jaws are made
AVM7EV............................ (Right Green)..............................$15.95 of durable and wear-resistant molybdenum steel.
AVM6EV............................... (Left Red).................................$15.95 M1R....................... (Cuts Left and Straight Red)..................$20.95
M2R.................... (Cuts Right and Straight Green)...............$20.95
M3R.............................(Cuts Straight Yellow)........................$21.95
MKR....................................(Set of All 3)...............................$49.95
WISS ERGONOMIC OFFSET SNIPS

ANDY SNIPS®

• Offset blades keep hands clear of metal

• Fine serrated jaws require very little (if any) cleanup after cutting
• Cuts up to 18ga (.049”) aluminum or steel
Snips are advanced metal cutting tools originally developed for
cutting extremely tough alloys used in the aircraft industry. The jaws Superior quality, heavy-duty snips are only 1/3 the weight of steel
are made of durable and wear-resistant molybdenum steel. types, and give many more years of service. Comfortable, sleek
contour aluminum handles have reinforcing ribs to duplicate the
The serrated offset jaws are designed to make straight or tight circu- strength of steel. Handles will not spring when cutting heavy gauges
lar cuts with equal ease while keeping your hand safely away from of sheet metal. Inlaid blades are supreme cutlery grade moly steel,
the work. electronically heat treated and tempered for continuous use. Preci-
M6R........................(Wiss Left and Straight Red)...................$24.95 sion ground, beveled cutting edges stay sharp longer and make
M7R.....................(Wiss Right and Straight Green)...............$24.95 pattern cutting, even circle cuts an easy job. Blades are able to be
sharpened and also easily replaced when necessary.
M12............................... (12” Long, 3” Cut)..........................$34.95
M14............................(14’’ Long, 3-1/2” Cut).......................$38.95
CIRCLE CUTTER

This tool, also known as a “Fly Cutter”, LIGHT METAL SNIP

uses a flying cutting bit to cleanly cut Compact sheet metal
holes in metal, wood, plastic, and snip makes quick work
hardwoods from 1” to 5-1/2” diam- of trimming aluminum,
eter. The included 1/4” drill bit auto- plastic, and sheet steel
matically forms its own pilot hole prior material. Unique high le-
to cutting . The drill shank is 5/16”. We verage design will cut up
strongly recommend a drill-press to 24ga metal with virtu-
and safety gear when using this tool. ally no effort. Made of
5B........................................................................................$18.95 stainless steel.
555........................(Replacement Cutter Blade)....................$4.95 K147....................................................................................$23.95

80 800-248-0638 AIRCRAFT TOOL SUPPLY www.aircraft-tool.com

 SHEET METAL TOOLS
HEAVY DUTY HAND SEAMER ATS DELUXE FLUTING PLIERS

The extra wide 3-3/8” jaw

face is machined smooth
and aligned to be exactly
parallel along the edges.
The 6” handle is covered
in a thick vinyl for maxi-
mum leverage without
any discomfort.
Narrow fluting pliers are used for straightening out or coaxing sheet
HS144.................................................................................. $24.95
metal into the correct shape. Great for working on spars, ribs, and
bulkheads. Smooth polished faces produce very clean flutes with-
out any marring. 3/16” fluting faces.
ECONOMY HAND SEAMER FP21....................................................................................$20.95

Locks to work with powerful non- VISE GRIP FLUTING PLIERS

slip grip. Eliminates tiresome
hand gripping. Ideal for holding Make narrow & precise flutes
templates or riveting work, weld- for straightening ribs and bulk-
ing, etc. Throat depth 1-3/4”. heads easier & better than
pliers with molded jaws. Jaws
AE575................................ (Avery Tools)..............................$48.95
are 3/16” diameter.
S7........................................... (Irwin)...................................$25.95

AE500................................ (Avery Tools)..............................$48.95

BURNISHING TOOL 7070................................... (ATS Brand)...............................$39.95

Designed to remove sur-

FLUTING PLIERS
face blemishes in aircraft
sheet metal. Comfort
grip handle. Special coating on jaws allows
work on aircraft components
515A................................................................................... $11.95 without marring the surface.
Has a 1” reach and will pro-
duce a 3/8” flute.
SKIN WEDGE FP10....................................................................................$19.95

EDGE SCRAPER

Ideal for deburring sheet metal

edges. A special guard protects
users hand.
A skin wedge is the tool to use (instead of a screwdriver) whenever
you need to pry and jog sheet metal skins. Just slip the thin curved
blade into the gap and slide it along the edge to gently separate SP201A................................................................................$11.95
the edges without gouging the skin. Can also be used as a jogging
tool to align new skin. 7” long by 1” wide. DOUBLE DEBURRING TOOL
SWG7....................................................................................$9.95
SWG7-3................................ (Set of 3)...................................$9.95

HAND TOGGLE CLAMPS

Fast, efficient deburring tool designed specifically for sheet metal
Toggle clamp has a jaw capacity of and composite materials. Replaceable hardened twin cutting
1 in. and jaw depth is 1-1/8 in. wheels deburr sheet metal up to 3/8” thick. Overall length is 7-3/4”.
G480...................................................................................$20.95
145......................................................................................$23.95 G480-RB.............. (Replacement Cutting Wheel)..................$5.95

800-248-0638 AIRCRAFT TOOL SUPPLY www.aircraft-tool.com 81

 SHEET METAL TOOLS
SCRIBES & AWLS INSTRUMENT HOLE PUNCH

GT83
627

15045

GT818

Special heat-treated for long, dependable service.

Reversible cutter for both 2-1/4” and 3-1/8” instrument panel holes.
PART DESCRIPTION PRICE Easy to use even with instrument panel installed in aircraft. Allows for
close work with other instruments already installed.
GT818 Scratch Awl $6.95
15045 Scratch Awl $8.95 123C................................................................................. $159.95
627 Hook and Scribe $4.95 T123C................ (Instrument Hole Drill Template)...............$20.95
GT83 Pocket Scribe with Replaceable Tip $4.95
GT83P Replacement Tip for GT83 $1.95

ADJUSTABLE HOLE CUTTER

This adjustable hole cutter cuts

perfect holes from 2” to 12” di-
AN BOLT GAUGE
ameter in 16 ga. metal and wood
up to 1” thick. Ideal for cutting out
All metal gauge designed inspection and instrument holes.
to accurately determine Uses any air or electric drill.
the sizes and lengths of AN
bolts up to 5/8” diameter. HC1.....................................................................................$69.95
Self-explanatory, easy to CB............................(Replacement Cutter Bit)....................$12.95
use instructions are written
directly on the gauge.

AE1350................................................................................$11.95 MANUAL PUNCH KIT

• Die set 1/2 in. type C

PRECISION SCREW AND BOLT SHEAR • Die set 3/4 in. type C
• Die set 1 in. type C
A precision device to cleanly cut
• Die set 1-1/4 in. type C
screws and bolts without damag-
• Die set 1-1/2 in. type C
ing the threads. Simply insert the
• Die set 2 in. type C
screw or bolt into the proper size
• Shaft and bearing - small
threaded opening, set the length
• Shaft and bearing - medium
required, and strike the cutting
blade with a hammer to cleave
the bolt. It cuts threaded products
in sizes of 4-40, 6-32, 8-32, 10-32, Knockout punch kit is ideal for punching clean holes in metal, fi-
10-24, 1/4-20, and 1/4-28. It will berglass and plastic materials up to 10 ga thickness. Easy to use,
cut steel, stainless steel, aluminum, simply drill a pilot hole and place 2 cutters on either side then put
brass, and even hardened bolts. the arbor through the cutters and use the included ratchet to bring
Comes in a protective pouch and the cutting jaws together. Includes a set of 6 dies, arbor and ratchet
includes complete instructions. plus a carrying case.
SBS1.................................................................................. $115.95 E902-481........................................................................... $174.95

82 800-248-0638 AIRCRAFT TOOL SUPPLY www.aircraft-tool.com

 SHEET METAL TOOLS

ATS 2” AIR CIRCULAR SAW

NEW FOR 2018

• Uses 2” (51 mm) saw blades

• .080” (2 mm) steel capacity
• .290” (7.5 mm) alum capacity
• 1200 RPM
• Weight 2.42 lbs (1.1 kg)
• Length 6-7/8” (175 mm)

Designed to make precise, controlled cuts in aluminum panels up to 1/4” thick. Leaves a high-luster, burr-free edge that does not
require any additional filing or cleanup. Great for cutting out access panels. Excellent balance and smooth operation
ATS8510B........................................................................................................................................................................... $179.95
ATS8510B-RB..................................................................(Replacement Blade)..................................................................... $29.95

ATS PUNCH AND FLANGING TOOL VIBRATION REDUCED SAW KIT ATS HIGH SPEED
RECIPROCATING SAW KIT

• Cap 16ga (.060”/15mm) steel.

• Punch Dia 3/16” (5 mm)
• Flange width 1/2” (12 mm)
• Rubber comfort grip
• 9-3/4” (248 mm) OAL
• 2.75 lbs (1.25 kg) • Cuts up to 16 ga (.060” / 15 mm) steel or
When overlapping two pieces of sheet met- aluminum
al, you must “jog” the edge of one sheet so • .063” (16, mm) Stroke Length
that they will join together without seams- Very low vibration saw is designed to reduce • 10,000 Strokes Per Minute (SPM)
and that’s just what this tool does. The jog- the effects of vibration shock injuries. Cuts at • Weight 2.1 lbs (1.35 kg.)
ging die places a nice 1/2” jogging flange 5000 strokes/min. Operates at 90 psi.
Heavy duty saw features safety guards and a
on the edge of sheet metal up to 16ga. Complete kit includes: locking throttle to prevent accidental starts.
While the other end of the die contains a • Saw At 10,000 strokes per minute, this saw will cut
hole punch that will make a clean 3/16” • 5 32T Blades through steel or aluminum just as fast and
hole. This tool is a real time-saver if you do a • 5 24T Blades easily as cutting through wood. Complete
lot of sheet metal work. • 5 18T Blades kit includes the high speed saw, two sets of
ATS8400...........................................$75.95 • Air Swivel blades, mini oiler, a swivel connector, ac-
• Molded Case cessory tooling, and a blow molded case.
ATS8229K........................................$139.95 ATS8202K..........................................$99.95
For complete selection ATS526...... (18 Teeth Bld 5 pc)...........$5.95 ATS526...(Rep Bld, 18TPI, 5 pkg.)........$5.95
visit www.aircraft-tool.com ATS527...... (24 Teeth Bld 5 pc)...........$6.95 ATS527...(Rep Bld, 24TPI, 5 pkg.) .......$6.95
ATS528...... (32 Teeth Bld 5 pc)...........$5.95 ATS528...(Rep Bld, 32TPI, 5 pkg.)........$5.95

800-248-0638 AIRCRAFT TOOL SUPPLY www.aircraft-tool.com 83

 SHEET METAL TOOLS
ATS HIGH SPEED AIR SHEARS JILSON SUPERSNIP® SHEARS

The SuperSnip cuts cleanly and accurately without damage to

painted, plated, or polished surfaces! As it cuts, the SuperSnip con-
veniently snips off the waste curl so that it does not build up and
interfere with your progress; and a built-in guard prevents the cut-off
The powerful jaws breeze through 16ga sheet metal at over 50 feet/ waste from flying up and into the eyes. The SuperSnip makes straight
min. Great for rough cutting, or finish trimming. Triple blade design or curved cuts in up to 16 gauge aluminum or 18 gauge steel. Inte-
cuts without leaving any edge burrs or distortions. rior cuts can be made by first drilling a 1/4” hole.
• Cuts up to 16 ga (.060” / 15 mm) steel or aluminum J1451..................................................................................$55.95
• Replaceable blades may be sharpened for extended use JS1251RB.................... (Replacement Blade).........................$9.95
• Weight 3 lbs (1.35 kg.)
ATS8500....................... (Pistol Grip Handle)....................... $105.95
ATS8501.........................(Straight Handle)......................... $110.95 JILSON MONODEX® SHEARS

HAND NIBBLER
Improved nibbler design pro-
vides maximum comfort and
ease of use. The extra long
handles (7”) delivers enough
force to easily cut through 18
ga. (.046”) aluminum, steel,
or plastic. The punch action The Monodex® shears will accurately cut aluminum up to 16
of the nibbler makes it flexi- gauge, and mild steel up to 18 gauge without distorting, or curling
ble enough to cut any shape the edges of the cut. Interior cuts can easily be made by first drilling
ranging from a straight line a 1/4” starter hole to accommodate the blade.
down to a 5/16” radius circle.
JS12....................................................................................$31.95
64823..................................................................................$20.95 JS1251RB.................... (Replacement Blade).........................$9.95

ATS AIR NIBBLER

RTN TUBING NOTCHER

The RTN100 (Ol’ Joint Jigger)

is a bench-mounted tubing
notcher designed to make
precision angular cuts in both
round and rectangular tubing.
By using inexpensive BIMETAL
• Cuts up to 16 ga (.060” / 15 mm) hole saws (not included), you
steel or aluminum can easily and economically
• Easily replaceable punch and die notch all types of tubing rang-
• Weight 1.74 lbs (.79 kg) ing from mild aluminum to
Cuts beautiful, burr-free edges in aluminum and steel sheets up to stainless steel.
16ga (.060”) thick. Features push-type action to give you a better
view of you cutting path.
ATS8300............................................................................ $109.95 RTN100.............................................................................. $175.95
ATS8300-RP.................(Replacement Punch).......................$14.95 RTN100B.......................... (Base Adapter)............................$39.95

84 800-248-0638 AIRCRAFT TOOL SUPPLY www.aircraft-tool.com

 SHEET METAL TOOLS
ATS BENCH BENDER BRAKE
MITTLER BROS AIRCRAFT PUNCH AND FLARE SET

Bends and forms up to 90° in metals up to 18 gauge thickness. Pro- Mittler Brothers punch and flare tool sets are designed to give your
vides flanged edges up to 1” in height. Adjustments for stock thick- sheet metal a unique, clean look. Just drill a pilot hole for the draw
ness, sharpness of bends are easy to make. Includes two “C” clamps. bolt and then apply the tool and tighten the bolt for a smooth, flared
hole in one easy step. They can also be used as a hole punch, sim-
PART CAPACITY BENDING LENGTH PRICE ply by using the punch and die. Can be used on aluminum with a
144ST 18 ga. 18” $44.95
thickness of 0.040 in. to 0.062 in., mild steel with a thickness of 0.040
244ST 18 ga. 24” $55.95
in. to 0.062 in., and stainless steel with a 0.040 in. thickness.
364ST 18 ga. 36” $81.95
PART NUMBER SIZE PRICE
1300-030AC35 1” $129.95
1300-031AC35 1 1/4” $129.95
LANCASTER PUMPS® METAL SHRINKER/ STRETCHER
1300-032AC35 1 1/2” $145.95
1300-033AC35 1 3/4” $145.95
1300-034AC35 2” $155.95
1300-035AC35 2 1/4” $155.95
1300-036AC35 2 1/2” $155.95
1300-037AC35 2 3/4” $169.95
1300-038AC35 3” $169.95
1300-039AC35 3 1/8” $229.95
1300-040AC35 3 1/4” $229.95
1300-041AC35 3 1/2” $229.95
Shrinks and stretches metal to form gentle radiuses bends or to
straighten out sheet metal. Shrinks metal down to a 2” or 3” radius. 1300-042AC35 3 3/4” $245.95
Works and forms metal up to, and including, 16 gauge. Mounts eas- 1300-043AC35 4” $245.95
ily in a bench vise. Jaws are reversible to increase usage. 1300-044AC35 5” $299.95

PART DESCRIPTION PRICE 1300-045AC35 6” $355.95

4135 Metal Shrinker $216.95 PUNCH AND FLARE KITS

4136 Metal Stretcher $216.95
4135/4136 Set of Both Units (4135 & 4136) $405.95 PART NO DESCRIPTION PRICE
523 Replacement Shrinker Jaws $108.95 6 Piece Kit in sizes: 1”, 1-1/4”, 1-1/2”,
524 Replacement Stretcher Jaws $108.95
1300-415 $779.95
1-3/4”, 2”, and 2-1/2”
Shrinker Stretcher Combo Unit 7 Piece Kit in sizes: 1”, 1-1/4”, 1-1/2”,
4135-524 1 Metal Shrinker & 1 Stretcher Jaw $295.95 1300-412 $929.95
1-3/4”, 2”, 2-1/2”, 3”
9 Piece Kit in sizes: 1”, 1-1/4”, 1-1/2”,
1300-414 $1,119.95
1-3/4”, 2”, 2-1/4”, 2-1/2”, 2-3/4”, 3”
See complete listing of sheet metal tools online at 13 piece kit in sizes: 1”, 1-1/4”, 1-1/2”,
1300-413 1-3/4”, 2”, 2-1/4”, 2-1/2”, 2-3/4”, 3”, $2,049.95
www.aircraft-tool.com
3-1/4”, 3-1/2”, 3-3/4”, 4”

800-248-0638 AIRCRAFT TOOL SUPPLY www.aircraft-tool.com 85

 SHEET METAL TOOLS
JET™ COMBINATION SHEAR, BRAKE AND ROLL TENNSMITH BENDER BRAKES 4’, 6’, 8’ & 10’

Tennsmith brakes are the

industry standard. Their
rugged construction and
precise control makes
them the most sought
after tool on the market.
Their ease of operation
causes less fatigue and
boost operations efficien-
cy. FOB shipping point.

WID WGT
PART FINGERS CAPACITY PRICE
IN. (LBS)
This tool combines the functions of a shear, bender brake, and a
slip roller in one compact unit. The Shear can be used with mild S48-22 48 220 None 22ga. (.030) $722.95
steel, aluminum, soft metals, and plastics. The Brake has removable HBS48-16 48 460 None 16ga.(.060) $1,346.95
fingers that permit angle, channel, box and other complex bend- HB97-18* 97 1385 None 18ga.(.040) $3,931.95*
ing operations. The Slip Rolls are precision turned and ground with HB121-18* 121 2350 None 18ga.(.040) $5,678.95
wire grooves. U48-22 48 280 2”,3”,4” 22ga. (.030) $930.95
HBU48-16 48 495 2”,3”,4” 16ga.(.060) $1,523.95
MIN. ROLL
WIDTH WGT. HBU72-16* 72 1700 2”,3”,4” 16ga.(.060) $4,778.95
PART DIA CAPACITY PRICE
IN. (LBS) Optional Stand (for use with S48, U48,
(INCHES)
B48 $244.95
& HBU48)
SBR-30N 30 320 1-1/2 22ga. (.030) $1,249.95
*Free-standing floor models
SBR-40N 40 575 2 22ga.(.030) $1,949.95
SRS-30N Optional 30” Floor Stand for SBR-30N $257.95 TENNSMITH INDUSTRIAL SHEARS
SRS-40N Optional 40” Floor Stand for SBR-40N $336.95

JET™ HAND BENDER BRAKES

Unit is available in 36” or 52” length and comfortably handles up to

16 Ga. mild steel. Comes complete with protractor gauges, slide
gauges. FOB shipping point.
Jet Hand Brakes are constructed to last. All body sections are weld- PART WIDTH WEIGHT PRICE
ed steel plate with heavy truss rods and braces for greater strength,
a precise bed and beam alignment ensures accuracy. The HB- S-36 36” 700 lbs. $2,236.95
S-52 52” 950 lbs. $2,974.95
1648N features a removable apron nose extension.

WIDTH WGT.
PART FINGERS CAPACITY PRICE
IN. (LBS)
HB-2248N 48 210 None 22ga. (.030) $919.95 Visit www.aircraft-tool.com for full selection of
S-48N Optional Floor Stand $405.95 Bender Brakes, Shears, and Slip Rollers.

86 800-248-0638 AIRCRAFT TOOL SUPPLY www.aircraft-tool.com

 CABLE & WIRE
PRECISION CABLE TENSIOMETER COMPACT CABLE TENSIOMETER

The T60 is an industrial and military grade tensiometer accurate to

within 5%. Simple, comfortable lever grip permits one hand opera- The extremely small size of this tensiometer permits entry through
tion without operator fatigue. A positive 3-point cable grip system small openings, and permits accurate readings on cables located
prevents dislodgement when the instrument is hanging free on in confined areas. Each instrument is calibrated at the factory and
control cable. The accurate built-in gage eliminates guess work. It is provided with its own calibration chart for the simple conversion of
requires no risers for the various size cables. The gauge also has a readings into pounds of tension. The chart also indicates the risers
“read hold” feature which allows you to take a reading in confined that must be used to accommodate various sizes and tensions. This
areas. Includes certificate of calibration conformance. tool is so easy to use that the entire testing operation can be done
with one hand in a matter of seconds.
RANGE IN LBS. CABLE SIZES UNIT USED ACCURACY
10-200 1/16”, 3/32”, 1/8” C8 5% RANGE IN LBS. CABLE SIZES RISER USED ACCURACY
30-200 5/32”, 3/16” C8 or C9 5% 10-100 1/16”, 3/32”, 1/8” Number 1 5%
80-200 7/32”, 1/4” C8 or C9 5% 15-150 5/32”, 3/16” Number 2C 5%
25-150 7/32”, 1/4” Number 3 5%
T60-1001-C8......................(10-200 lbs).......................... $1,014.95
T60-1001-C9.....................(150-450 lbs)......................... $1,024.95 MC257................. (Model Type T5-2002-101-00)............... $940.95

FLYING WIRE TENSIOMETER ECONOMY CABLE TENSIOMETERS

3375D

A simple, elegant, and extremely accurate flying wire tensiometer KM8159

that’s designed to be used in conjunction with a standard dial or This tool combines low cost with high quality and accuracy. It’s a
beam type torque wrench. This tool is used for setting the tension direct reading tensiometer that’s compact enough to fit through
on flying wires from 1/4 - 1/2 inch, and tension ranges from 200 lbs inspection holes.
to 2400 lbs. Can also be used for setting drag, anti-drag wire ten-
sion. Ideal for use on Stearmans, Wacos, and Pitts, etc. To use this PART RANGE IN LBS. CABLE SIZES PRICE
tool you’ll need a torque wrench with a 1/2” drive. Please note that 3375D 15-70 1/16”, 3/32”, 1/8” $229.95
a flying wire’s size is measured at the round, threaded end of the 3375G 50-350 5/32”, 3/16” $251.95
wire, not across the flat. Tie wires are also measured by the thread 3375H 50-350 1/4” $229.95
size and pitch.
Set of 3 Tensiometers plus storage
HWT-1........................... (Tensiometer Only).......................$260.95 KM8159 $679.95
case
HWT-1KIT.......... (Tensiometer & Dial Torque Wrench).......... $529.95

800-248-0638 AIRCRAFT TOOL SUPPLY www.aircraft-tool.com 87

 CABLE & WIRE
ATS SAFETY WIRE TWISTER

Lifetime Warranty

Non-Reversible

“They work well so far and I haven’t had any complaints with them. They
work better than name brand safety wire pliers like Snap-On or Matco, be-
lieve it or not! I haven’t had any issues using these on 0.041” safety wire, un-
like other more expensive name brands. I’d highly recommend getting these
Reversible if you need to safety wire a lot, like in the aviation industry.”
Reversible Safety Wire Pliers switches from right-handed (clockwise) to left-handed (counterclockwise) twisting at the flick of a switch. This al-
lows you to change directions on the fly without having to resort to a second tool. Excellent for series wiring where you must switch directions
with each bolt. Features a smooth spring-loaded automatic return with a rugged reversing mechanism that resists dirt and contaminants,
with a positive locking collar that will not pop back during use. It also has a tapered nose, and built in wire cutters. These are the twisters I
want in my tool box!
6WR.......................................................................................... (6” Reversible).................................................................................. $79.95
9WR.......................................................................................... (9” Reversible).................................................................................. $79.95
6WA...................................................................................... (6” Non-Reversible).............................................................................. $27.95
1WA..................................................................................... (10” Non-Reversible)............................................................................. $25.95

TURNBUCKLE RIGGING KITS HAND SAFETY WIRE TWISTER SAFETY WIRE

The hand twister is a convenient way of twist-

ing safety wire in very confined areas. The
narrow shaft reaches into areas that are in-
accessible to other safety wire tools.
“This product just about paid for its self with the
first use, I use it on all aircraft cables that I work 134S...................... (8”).....................$10.95
on” ~ K. Brown
134SL................... (12”)....................$12.95
Adjusting cable turnbuckles no longer has to
be a dreaded ordeal, and you won’t need Stainless steel annealed, used to secure
three hands to do it. With our Turnbuckle Rig- ATS EZ-TWIST SAFETY WIRE BIT
bolts, nuts or hardware subject to vibration.
ging Kit you’ll get a complete solution that Comes in no waste 1 lb. dispenser cans.
consists of our Turnbuckle Rigging Tool (TB01) Type 302. MS-20995C; MIL-W-6713.
to hold the terminal ends of the turnbuckle in
place and keep the cable from twisting as PART DIAMETER PRICE
you turn the barrel. And you also get our Turn- 302-21 .021 $14.95
buckle Wrench (TB02) to make turning the 302-25 .025 $14.95
barrel a piece of cake. The wrench clamps The EZ-TWIST safety wire twisting bit quickly 302-32 .032 $14.95
around the barrel (MS21251 style) and gives snaps into any 1/4” bit holder (or chuck) 302-41 .041 $14.95
you the leverage to effortlessly turn it. This for instant use. Simply string the safety wire
kit is a real timesaver that will let you adjust through the bolt or nut to be wired and run
turnbuckles through inspection holes quickly the wire ends into the EZ-TWIST. Then, set your
and with minimum effort. drill to forward (or reverse for left-handed For more information about our
twists), and twist away. products, visit our website
TB12K............. (Rigging Kit)...............$49.95
TB01.......... (Rigging Tool Only).........$24.95 EZT3....................... (3”).......................$7.95 www.aircraft-tool.com.
TB02.....(Turnbuckle Wrench Only)....$29.95 EZT6....................... (6”).......................$8.95

88 800-248-0638 AIRCRAFT TOOL SUPPLY www.aircraft-tool.com

 CABLE & WIRE
MILBAR PROFESSIONAL SAFETY WIRE KIT ATS SAFETY WIRE DRILL JIG
This versatile safety wiring kit belongs
in every professional’s tool kit. It in-
cludes three Safetytwist® wire twist-
ers that will cover any application.
The kit includes a 6” Mini Twister with
tapered nose, a 9” Spring Return
Twister, and the 13W specialty twist-
er that is adjustable from 9” to 12”.
Also included are three 1/4 lb. spools
of annealed stainless steel wire
(.020”,.032”,.041”). It’s all packed in
a durable plastic carrying case. (NSN This tool provides a fast and simple way to drill safety wire holes in
5180-90-986-8939). the HEAD as well as the BODY of AN bolts, and studs. Works with all
105W................................................................................. $209.95 Hex Head, Allen Head, and Cap Head bolts from size 3/16” to 5/8.”
Includes holder, drill bushing (2), and 1/16” drill bits (2). Made from
anodized 6061-T6 Aluminum for durability.
MILBAR REVERSIBLE SAFETY WIRE TWISTER 6061B..................................................................................$59.95

CLAMPTITE™ PRO TOOL KIT

Milbar’s safety wire twister pliers can twist safety wire in either direc-
tion with a simple turn of a sleeve - a second tool is not needed for
left handed twisting. The jaw design holds the wire firmly without nicks
or scrapes. It also features a spring-loaded return for easy operation
in tight areas. Made in the U.S.A.
25W.......................................... (6”).....................................$95.95
26W.......................................... (9”)................................... $100.95

MILBAR SAFETY WIRE TWISTER

This tool is machined stainless steel with a one piece body, nose and
bronze nut. This was designed for the detailed craftsman who need
a long lasting tool able to hold up to extremely tough wire while
clamping, binding and pulling the wire until the job is complete.
For wire up to .080” diameter (our .062” diameter) or wire sizes .032”
diameter, .041” diameter, .051” diameter, and .062” diameter.
The Milbar right-hand safety wire twister has a diagonal nose for
CLTK01.............................(Complete Kit)...........................$129.95
easier use in tight areas, and features an automatic spring return for
faster operation. They are used throughout the aerospace industry CLT01..................................(Tool Only)................................$69.95
as well as in the military. Made in the U.S.A.
11WS............................... (6” Right Hand)............................$79.95
1W393............................. (9” Right Hand)............................$79.95 SAFTBLOCKS
5W4.................................. (9” Left Hand)............................$100.95

MILBAR SAFETY WIRE SPECIALTY TWISTER

Special design enables you to drill safety wire holes through the
The Milbar Specialty Twister is ideal for difficult access situations. head of bolts or through nuts, across the diagonal. Accepts up to
Its deep, slender reach will take it into areas that just cannot be 3/4 inch diameter nuts and bolts. Easy to use, just place the bolt
reached with ordinary safety wire pliers. Adjustable 9” to 12”, right head into the “V” groove, tighten the holding screw, drill and deburr.
hand twist with manual return. MT002............................. (Nut Saft Block)............................$35.95
13W.....................................................................................$55.95 MT001............................ (Aero Saft Block)...........................$42.95

800-248-0638 AIRCRAFT TOOL SUPPLY www.aircraft-tool.com 89

 CABLE & WIRE
LOOS & CO. CABLE PRODUCTS
LOCOLOC® KEARNEY CABLE SWAGING MACHINE LOCOLOC® CABLE SWAGER KIT

This kit contains everything you need to swag cable sizes from 1/16”
up to 3/16”. It has an assortment of oval and stop sleeves, AN steel
thimbles, compression gauge, steel tool box, plus the 1 swager, and
the C-7 cable cutter.
This portable, hand operated roll type swaging machine will swage CSS-1............................................................................. $1,133.95
MS and AN type terminals onto galvanized and stainless steel ca-
bles from 1/16” diameter up to and including 3/16” diameter. You
may purchase the tool only and get only the dies you need, or you
can purchase the complete kit. The kit includes the machine, a full HAND SWAGER
set of roll dies, terminal gauges, feed guide adapters, and a steel
carrying and storage case.

PART DESCRIPTION PRICE

Complete kit which includes all of the
M1-K $7,849.95
items listed below. Shipping weight 64 lbs. Multi-compression hand swager with cable cutter. Swages 1/16”,
Swaging machine only with case, Feed 3/32”, 1/8”, 5/32”, and 3/16” oval and stop sleeves, plus 7/32” stop
M1 $3,389.95 sleeves, total of 11 sizes plus the ability to cut up to 7/32” diameter
Guide Assembly, & Feed Guide Adapters
aircraft quality steel cable (1SC only). A tool with a dozen functions!
M1-B2 1/16” Ball Terminal Die $789.95
Only 26” long. Shipping weight 6.5 lbs.
M1-B3 3/32” Ball Terminal Die $789.95
M1-B4 1/8” Ball Terminal Die $789.95 1SC................... (LOOS & CO. LOCOLOC® Model)............ $326.95
GAB24 Ball Terminal Gauge (1/16”-1/8” cable) $199.95
M1-S2 1/16” Straight Terminal Die $629.95
M1-S3 3/32” Straight Terminal Die $627.95 BENCH SWAGER
M1-S4 1/8” Straight Terminal Die $629.95
M1-S5 5/32” Straight Terminal Die $629.95
M1-S6 3/16” Straight Terminal Die $629.95
Straight Terminal Gauge (1/16”-3/16”
GAS26 $210.95
cable)
For in-shop one location jobs. Multi
compression jaws swag 1/16”, 3/32”,
1/8”, 5/32” and 3/16” oval and stop
CABLE DIAMETER GAUGE sleeves plus 7/32” stop sleeves. 22.5”
long, 6.25” high.

Quickly and accurately measures standard ca-

ble diameters. Measures sizes: 1/16”, 3/32”, 1/8”,
5/32”, 3/16”, 7/32”, 1/4”, 9/32”, 5/16”, 3/8”.

GAP4.....................................................................................$6.95 1BSC.................. (LOOS & CO. LOCOLOC® Model)............ $531.95

90 800-248-0638 AIRCRAFT TOOL SUPPLY www.aircraft-tool.com

 CABLE & WIRE
CABLE SWAGERS HAND SWAGER

Compound action swagers doubles the force so that you can make
perfect swages with less effort. Each swager features a built-in cable
cutter that will cut up to 1/4” cables. Swages standard AN copper, Ideal for quick swaging of nicopress sleeves onto cables. The 2 swa-
zinc, and steel oval and stop sleeves. Not for stainless steel sleeves. ger will do 1/16”, 3/32”, and 1/8” cables. The #3 swager is for 1/8”,
5/32”, 3/16” and 1/4” cables. A Go-No-Go Gauge is included with
both the 2SKT and the #2 swager.
PART CABLE SIZES WGT LEN PRICE
2SKT............(Complete Kit with thimbles and Sleeves).......$34.95
JPS14 1/16”, 3/32”, 1/8” 3 lbs 14” $49.95
JPS24 1/16”, 3/32”, 1/8”, 5/32”, 3/16” 6 lbs 24” $85.95 2.......................... (For 1/16”, 3/32” & 1/8” Cable)................$17.95
3......................(For 1/8”, 5/32”, 3/16” & 1/4” Cable)............$53.95
54-11............................(Go-No-Go Gage)............................$5.95

FELCO® DELUXE CABLE CUTTERS

HAND SWAGING TOOL

Swiss made cutters feature a unique triangular jaw that cuts cleanly
and never frays the end. New handle design allows you to cut with
less effort. 3/16” capacity.
C7................................... (Felco® Brand)............................$73.95
0690TN...................... (Cooper Tools® Brand)......................$41.95
E200-063.............................. (Eclipse)..................................$17.95
This is a (4) cavity tool, swaging sleeve sizes 1/32”, 3/64”and
1/16”copper and aluminum sleeves, and 3/32” copper sleeves plus
AN100 THIMBLES, OVAL & STOP SLEEVES 1/32” stainless steel sleeves. Ratchet mechanism will not release un-
til swage is complete.
13SBHS.............................................................................. $171.95

A B C

Thimbles are made of stainless steel. Oval and Stop sleeves are SWAGER GAUGE
made of copper. Note: The C4 is used for both 3/32” & 1/8” cables.

THIMBLES (A) OVAL SLEEVES (B) STOP SLEEVES (C) Checks your cable swages to see if
PART SIZE PRICE PART SIZE PRICE PART SIZE PRICE they meet acceptable standards.
Measures sizes: 1/32”, 3/64”, 1/16”,
C3 1/16 0.54 SL-2 1/16 0.37 ST-2 1/16 0.53
3/32”, 1/8”, 5/32” and 3/16”.
*C4 3/32 *0.63 SL-3 3/32 0.58 ST-3 3/32 0.63
*C4 1/8 *0.63 SL-4 1/8 0.85 ST-4 1/8 0.63
C5 5/32 0.86 SL-5 5/32 1.25 ST-5 5/32 0.89
C6 3/16 0.99 SL-6 3/16 2.95 ST-6 3/16 0.89
GA1P...................................................................................$15.95

800-248-0638 AIRCRAFT TOOL SUPPLY www.aircraft-tool.com 91

 ELECTRICAL
AMP AND MOLEX PIN EXTRACTORS PRECISION ELECTRICAL PLIERS

A B C
Excellent quality pliers for delicate work on electronic circuits and
wiring. Drop forged from high grade steel with mirror polished sur-
face, oil hardened and tempered. Easy open double leaf springs.

PART FIG. SIZE TYPE PRICE

E100-012 a 6” Slim needle-nose $15.95
E100-013 a 5.5” Needle nose $16.95
E100-015 b 5.5” Flat nose $16.95
The five piece Pin Remover Set is designed for use with various con-
E100-014 c 5.5” Bent nose $16.95
nectors such as MOLEX, AMP, TYCO, etc. The pin extractors come
in various diameters. Simply, put the pin extractor into the housing,
push the plunger of the pin extractor, and extract the pin – it’s that
easy. Pouch bag included. PRECISION ELECTRICAL CUTTERS
CE-0275..............................................................................$66.95

A B C D
PRECISION TWEEZERS Manufactured from high grade steel with mirror polished surface,
induction hardened cutting edges with hot-formed box joints.
PART FIG. SIZE TYPE PRICE
E200-057 a 4.5” Full-flush diag cutters $17.95
E200-058 b 4.5” Slim full-flush cutters $17.95
E200-059 c 5” Full-flush side cutters $18.95
E200-060 d 5” Oblique end nippers $20.95
Surgical stainless steel, ideal for picking up and holding small parts.
E900-204.............................. (Set of 4)................................. $10.95
STAINLESS STEEL PLIERS

D-SUB INSERTION/EXTRACTION TOOL

E100-006 E100-025 E100-017 E200-067

Handy tool for installing and removing pins from D-Subminiature These pliers are stainless steel with mirror polished finish that prevents
housings. Simply place over pin, press lightly and pull pin out. flaking and corrosion. The leaf springs are spot welded to the tool
handles to fix the jaws in a comfortable position. The forged box joint
E900-065...............................................................................$4.95
construction gives strength and precision
E100-006................... (7.5” Long-Nose Pliers) ......................$12.95
E100-025................... (5.3” Long-Nose Pliers).......................$12.95
CLOSED BARREL D-SUB CRIMPER E100-017........... (6” Serrated Needle-Nose Pliers)...............$16.95
E200-067................... (5” Side Cutting Pliers).......................$13.95

INSULATED FORCEPS
• Hemostat locking design
• Surgical Stainless Steel
• Insulated handles
Ratcheting, 4-indent, spring-loaded crimper used to install ma- • Serrated jaws
chined terminal pins in D-Subminiature connectors. Installs AWG 20 • 6” OAL
to AWG 26 wires. Standard plugs 6 and 8 position. E900-181.............................. (Straight)...................................$9.95
E300-015.............................................................................$34.95 E900-222.............................. (Curved).................................$10.95

92 800-248-0638 AIRCRAFT TOOL SUPPLY www.aircraft-tool.com

 ELECTRICAL
TYPE DESCRIPTION FIG ELECTRICAL TERMINAL CRIMP KIT

A
Insulated Terminals & Splices: 22-10 AWG red, blue and yellow Now with Aviation
terminals and splices. Grade Terminals

Coax Terminals: BNC, TNC, Mini-UHF, RG-58, 141, 142, 303, 400,
B
59, 62, 210, RG6, 212, 222, 304, Belden 8279, 8281, 9231, 9141.

Open Barrel Contacts: 30-20 AWG pins and sockets found in most
C
AMP, MOLEX, ITT, Cannon, and other connector plugs.

TERMINAL CRIMPER DIES

These replacement dies will fit into the Professional
Ergonomic Crimpers (E902 series), as well as the
Economy Ratchet Crimpers (E300 series). Each die
is drop forged from tool steel and hardened.
E300-058...............................(Type A).................................. $16.95
E300-038............................... (Type B).................................. $16.95
E300-039...............................(Type C).................................$16.95 • Heavy duty ratcheting crimper with rubber handles (E300-002)
• 10 Butt splices 18-22 AWG • 24 Ring terminals #6, #8,
See complete selection of dies online at • 8 Butt splices 14-16 AWG #10, 1/4 14-16 AWG (Blue)
www.aircraft-tool.com • 6 Butt splices 10-12 AWG • 16 Ring terminals #8, #10,
• 32 Ring terminals #4, #6, #8, 1/4, 5/16 10-15 AWG (Yellow)
#10 18-22 AWG (Red)
ECONOMY RATCHET CRIMPERS An electrical terminal kit that includes a heavy-duty ratcheting
crimper (Type A) with rubber comfort grips, plus an assortment of
aviation grade insulated terminals and splices. Crimper features an
adjusting wheel to control pressure. Terminals meet MS-25036 QPL
Class 1, and SAE AS7928, Type II, Class 1 and 2 standards
AVT500K..............(MilSpec/AS Aviation Grade Kit)...............$89.95
E500-037.......................... (Standard Kit).............................$60.95

Powerful full-ratcheting crimper with safety release and adjustable

crimp pressure. Very comfortable rubber handles and ergonomic
design makes it easy to install multiple terminals without fatigue.
ELECTRONIC MAINTENANCE FIELD KIT
E300-002............... Insulated Terminals (Type A)..................$37.95
E300-003................... BNC Terminals (Type B)...................... $37.95
E300-005.............Open Barrel Terminals (Type C)................$37.95
E300-054...........................(Frame Only)..............................$29.95

PROFESSIONAL ERGONOMIC CRIMPER

A complete field maintenance kit for on-the-spot electrical repairs.

Includes all of the most commonly used electrical maintenance
tools for testing and repair. The entire kit comes in a convenient zip-
Full-ratcheting crimper with an ergonomic angled shape that re- pered canvas pouch for easy storage and transportation.
duces the exertion required to crimp terminals by as much as 60%.
Has an adjustable crimp pressure control wheel with safety release, • 7 Pc Hex Key Set • PVC Electrician’s Tape
and a comfortable rubber handles will not slip or stress your hand. • 5” Side Cutters • Digital Multimeter
• 6” Combination Pliers • 8 Pc Screwdriver Set
E902-152............... Insulated Terminals (Type A)..................$41.95 • 6” Long nose Pliers • (3 Phillips, 3 Flat, 2 Nutdrivers)
E902-137................... BNC Terminals (Type B)...................... $41.95 • Desoldering Pump • Zippered carrying case
E902-138.............Open Barrel Terminals (Type C)................$41.95 • Soldering Iron, Stand & Solder
E902-085...........................(Frame Only)..............................$31.95 E500-032........................................................................... $104.95

800-248-0638 AIRCRAFT TOOL SUPPLY www.aircraft-tool.com 93

 ELECTRICAL
HEAVY GAUGE RATCHETING CRIMPER MILBAR® MULTI-PURPOSE ELECTRICAL CRIMPER

The Multi-Purpose Crimper will crimp open barrel, closed barrel,

or flag terminals. It also has a bolt cutter section to cut bolt sizes:
4-40,6-32,8-32,10-32 & 10-24.
Powerful ratcheting crimper makes short work of attaching terminals 25E........................................ (Milbar)..................................$62.95
to heavy gauge wires and cables in sizes AWG 12-10, 8, 6, and 4.
CP-413G................. (Eclipse Stripper/Crimper)....................$10.95
Features new generation of energy saving crimper designed and
high leverage handles to provide superior mechanical advantage.
CP-351B.............................................................................. $62.95
AUTOMATIC WIRE STRIPPER AWG 24-10

NON-INSULATED TERMINALS RATCHETING CRIMPER

• Insulated terminals 22-10 AWG • Adjustable stopper

• Non-insulated terminals 22-10 • Micro adjustment
• Non-insulated spade/ring terminals • JIS 1.2, 2.0, 3.5 5.5 mm 2
AWG • Strips AWG 24-10
• AWG 22-16, 16-14, 12, 10 • DIN 1.5, 2.5, 4.0, 6.0 mm2 • Auto ignition terminals • Crimps lugs and terminals
This non-slip energy saving Ratcheting Crimper is made of high • Built-in cutter
quality carbon steel with black oxide finish for anti-rust. The high le- This automatic wire stripper is an excellent multi-use tool. It will strip
verage handles and compound action mechanism provide a su- 24-10 AWG copper wire, crimp insulated and non-insulated termi-
perior mechanical advantage compared to the generic crimper. nals and lugs, and features a built-in cutter.
CP-151B.............................................................................. $34.95 E200-072.............................................................................$18.95

LUG TERMINAL CRIMPER

CRIMPER - NON-INSULATED TERMINALS AWG 22-6

• For solderless, non-

insulated terminals
• AWG 22-16, 16-14, 12-
10, 8, 6
• Ratcheting design with
quick release
• High leverage handle
All metal tool, for crimping terminals to requires minimal force
heavy gauge wires from size AWG8 to
250MCM. Adjustable depth knob con-
trols the amount of crimping. Includes These high leverage crimpers are designed to work on non-insulat-
built-in go-no-go gauge. 22” Overall ed ring and spade terminals. The long arms require minimal force to
length. make a strong crimp on your connectors. The ratcheting design en-
sures a proper crimp is made every time. The tool features a quick
release if you need to abort your crimp mid-termination.
E300-107........................................................................... $136.95 E300-055.............................................................................$39.95

94 800-248-0638 AIRCRAFT TOOL SUPPLY www.aircraft-tool.com

 ELECTRICAL
AUTOMATIC WIRE STRIPPER WIRE STRIPPER/CUTTER

At only 6” long, this wire stripper/

Classic style wire strip-
cutter fits the hand very com-
per cleanly removes in-
fortably. The cutting jaws easily
sulation from wires in siz-
cut up to 14 AWG copper wire.
es AWG-22, 16, 14, 12,
At the other end is an auto-
10 and 8. Constructed
matic stripper that cuts and re-
of Die Cast Aluminum
moves insulation from 26 AWG
for durability.
to 14 AWG wire.
ELB250.................................................................................$10.95
E200-003............................................................................. $17.95

MULTI-FUNCTION WIRE STRIPPER/CRIMPER

Self-adjusting wire stripper FOD CATCHING NIPPERS

safely removes insulation
from AWG 24 to 10 wires. Heavy duty nippers with
Crimper section installs in- wire catching clip to trap
sulated and non-insulated snipped wire ends be-
terminals from AWG 22 to fore they can fly off and
10 Steel construction. cause damage.
E200-070.............................................................................$24.95

4-WAY INDENT DEUTSCH TERMINAL CRIMPER

2178M........................ (Xcelite® Brand, USA).......................$18.95
E200-082....................(Heavy Duty ESD Safe).......................$10.95

5” PRECISION FLUSH CUTTER

This economical Crimp Tool delivers the same type of crimp as the The Eclipse 5” Preci-
more expensive MIL-Spec tools at a fraction of the cost! At only 6 sion Cutter has micro
½” long, this tool maintains a full cycle ratchet that insures a com- tips and good for pre-
plete and perfect crimp each and every time. Use with 12-20 AWG cision work. It’s perfect
closed barrel terminals. for copper applica-
E902-499............................................................................. $34.95 tions in small areas.

9.5” CRIMPER PLIERS

E200-002..............................(14 AWG)...................................$8.95
This multi-functional tool is
E200-071..............................(16 AWG)...................................$6.95
ideal for those working with
un-insulated terminals. Used
for both cutting and crimp-
ing solid or stranded wire.
Constructed of hard steel for HEAVY DUTY LINE MANS PLIERS
long lasting durability.
Heavy duty Lineman’s
pliers are made from
E100-039.............................................................................$14.95
high quality carbon
steel, hardened finish.
COAX CABLE STRIPPER The product features ta-
pered head allows easy
Twin blade design safely removes the work in narrow space,
outer and inner insulation from coax- coil spring for self-open-
ial cables. Just clip it onto the cable, ing action to supply
and give it a couple of spins to pre- smooth operation, plas-
pare the coax for a BNC connector. tic coated handles for
Works with RG-58/59/62/and 6 cables. comfortable use.
E200-004.............................................................................$14.95 E902-307.............................................................................$22.95

800-248-0638 AIRCRAFT TOOL SUPPLY www.aircraft-tool.com 95

 ELECTRICAL
GAS AUTO IGNITE SOLDERING IRON ESD SAFE SOLDERING STATION
The perfect addition to
your toolbox! A soldering
iron with auto ignition for
easy starting and opera-
tion under any condition.
The transparent nylon gas
tank shows you your fuel
level at a glance. And the
heating element is ce-
ramic for a long service
life. Refills easily from any
butane dispenser. Comes The stabilized precise temperature control of this station makes it
complete with accesso- ideal for use with delicate circuitry without danger of overheating.
ries and plastic case. It is also ESD (Electro-Static Discharge) certified, which means that
GS-23K................................................................................$68.95 it will protect sensitive circuits from static discharge (the leading
cause of bench-level circuit failure) while you’re working on the part.
SS-207E...........................(Digital Display)..........................$104.95
BUTANE SOLDERING
SS-206E.......................... (Analog Display)...........................$79.95
IRON
The world’s most popu-
lar pocked-sized butane
soldering iron specifically QUICK CHARGE CORDLESS SOLDERING IRON KIT
designed for the hobby/ The Quick Charge
DIY enthusiast. Features in- Soldering Iron is a re-
clude: soldering tempera- chargeable soldering
ture of 410-750°F, torch iron kit. It’s ideal for
temperature 2400°F, 5.5” OAL and ready to use 20 seconds after the shop or field me-
ignition. Kit includes: Soldering Iron, conical tip 7992, protective cap chanic who needs a
with igniter instructions. Does not include butane fuel. reliable and consistent
7971....................................................................................$27.95 soldering tool when making critical electrical
repairs. It has a power rating of 25 watts and
reaches 900°F in less than ten seconds. The
DUAL WATT SOLDERING IRON 15-30W complete kit includes: rechargeable soldering
iron, charging stand, a fine tip, a heavy-duty
tip, battery and instructions.

7700....................................................................................$55.95

The high-quality tip of this Soldering Iron is built for a long lifespan
of use. The iron features a soft-grip ergonomic handle and a three
position switch on the handle to easily switch between off, 15W, and WELLER® PRO CORDLESS SOLDERING IRON
30 Watt settings. Suitable for lead-free soldering for RoHS.
E902-512.............................................................................$19.95

AUTO IGNITION GAS SOLDERING IRON

• 950 °F heat in under 15 • White LED illumination light

seconds • Includes batteries, lead free
This professional soldering iron and gas torch features an easy to use • 150 solder joints per battery solder, 2 tips, and wrench
auto ignitor and a precision control system for accurate heat deliv- set
ery. The built in stand keeps the tool and workspace safe when not Portable battery operated soldering iron is perfect for field mainte-
in use. It includes a needle soldering tip for precise electrical work, nance work.
as well as a torch for use with shrink tubing and brazing. BP865MP......................... (Soldering Iron)............................$24.95
GS-210................................................................................ $50.95 BP10............................. (Replacement Tip).........................$11.95

96 800-248-0638 AIRCRAFT TOOL SUPPLY www.aircraft-tool.com

 ELECTRICAL
3PC SOLDERING SPONGES SOLDERING HELPING HANDS

A good sponge is just as important

as having a good quality iron. Keep
your tips clean. The Eclipse 902-335
is a package of 3 sponges that can
be cut to any size for use in soldering
stands.
E902-335.............................................................................$18.95
SN-396 SN-390

PRYING/SPUDGER TOOL ASSORTMENT Includes 16 super bright and energy saving LEDs . The magnifier is
on a flexible neck that gives you 2.5X(6D) and 4X(12D) magnifica-
tion. The 3 adjustable helping hands clips allow for precise posi-
tioning and secure grip on your work. The magnifier is powered by
either 4 AA batteries or external power adapter. The set includes
solder spool brackets, soldering iron holder, cleaning sponge, brass
tip cleaner and solder flux.
SN-396................................ (With LED)................................$34.95
SN-390................................(Economy).................................$8.95
This set contains 5 tools for opening and prying small electronic
components without damaging the housing or parts. Use the pry-
ing paddle and opening levers to prevent scratching or chipping DESOLDERING TOOL
the housing. The aid tool is made of reinforced nylon and is handy
heat resistant tool. Ideal for catching and bending small wires or
Great for electrical repair work where
opening cases.
wires or components must be re-
1PK-3179...............................................................................$9.95 moved and resoldered. One-shot
vacuum action cleanly removes ex-
cess solder from the work area.

LIQUID DISPENSER E900-001N............................................................................$6.95

Polyethylene liquid dispenser

bottle feature a unique pump
mechanism that prevents back
DESOLDERING PUMP
wash of containments into the
container. Ideal for dispensing This mini desoldering pump is
solvents and cleaning solutions. small enough to operate with
Plastic bottle is chemically inert one hand. It delivers a precise
and will not react with or con- vacuum to remove molten sol-
taminate contents. der from circuit boards.
E900-251................................ (4 oz)......................................$6.95
E900-252................................ (6 oz)......................................$7.95
DP-366J.................................. (Mini)......................................$4.95
E900-253................................ (8 oz)......................................$8.95

6PC SOLDERING AID SET

ACID BRUSH SET Tool-Tips:
• Chip • Needle
High Quality Horse Hair acid
Holder • Hook
brushes are great for applying
• Lever • Knife
and removing soldering flux, ap-
• Fork Shaft • Brush
plying solvents and adjesives, etc.
• Scraper
No shop should be without a set
of these handy brushes. Overall
length of 5-3/4”, which gives you The set consists of 6 double-ended tools with pick and brush tips. This
the ability to get into tight spaces kit is specially designed to aid you in protecting your heat sensitive
easily. 5 per pack. components during soldering.
BA01......................................................................................$1.50 E900-100...............................................................................$7.95

800-248-0638 AIRCRAFT TOOL SUPPLY www.aircraft-tool.com 97

 ELECTRICAL
WIRE HARNESS SPOON DOUBLE HEMOSTAT SET
Jaws open greater distance
than handle for added reach
in tight locations. Increases
access by up to 50 percent.
Variable locking positions. Set
includes straight and 45 de-
gree pliers.
82111..................................................................................$69.95

No avionics installer should be without this tool. This handy tool HOLLOW SHAFT NUT DRIVER
makes the job of inserting a new wire into an already tied off wire
bundle much easier. This tool is a great time saver.
M35250.................................................................................$9.95

DIAMOND GRIP TERMINAL CLEANER

Bondhus Hollow Shaft Nut Drivers have a hexagonal upper shaft for
use with a wrench for increased torque. They are made with a non-
slip grip, anti-roll handle with an ergonomical design and a high
strength, chrome plated shaft.
Includes sizes 3/16, 1/4, 5/16, 11/32, 3/8, 7/16, and 1/2-inch.
48445..................................................................................$25.95

These patent-pending IPA 3-piece terminal cleaners feature a highly

durable and abrasive coating for cleaning small spade pin electri- SPRING HOOKS
cal connectors. They work on both male and female connectors for
flat pin or spade-style terminals to remove corrosion and extend har-
ness life. The base of the handles features a bonus abrasive coat-
ing for general large-contact maintenance. All three cleaners are
stored in their own premium-quality holster with a magnetic clasp.
8040.................................................................................... $29.95 This tool is equipped with both a spring hook and pull tool making it
ideal for pushing or pulling small springs and wires.
E902-070...............................................................................$4.95
CANNON PLUG PLIERS
E902-073...............................................................................$4.95

OVERHEAD LIGHT REMOVAL TOOL (WEMAC)

• Works on Beechcraft, Cessna,
Embraer, Sino Swearingen, and
more
It is a pliers that I have needed for decades and did not know it. It is very • No more damage to the housing
light and opens tight joints without marring the surface. ~ R. Pendergast when removing
• Manufactured with high friction
Designed to safely install and remove Cannon plug collars. Incor-
elastomer tip for maximum grip
porates removable plastic inserts which will grip on smooth, oily or
• 3-5/8” (9.2cm) high by 2-1/8”
serrated surfaces. Adjustable from 3/4” to 2-1/2” grip diameter.
(5.4cm) diameter
AT508K................................(ATI Brand)................................$29.95 A great tool to quickly and safely remove WEMAC overhead (eye-
AT508K-RP........... (Replacement Jaws for AT508K).................$9.95 ball) cabin light and air vent housings for servicing.
52910N........................ (Crescent® Brand).........................$36.95 WEMAC-1............................................................................$35.95

98 800-248-0638 AIRCRAFT TOOL SUPPLY www.aircraft-tool.com

 ELECTRICAL
3M WIRE MARKER TAPE WITH DISPENSER 3 1/2 DIGITAL MULTIMETER

The Eclipse MT-1233D digital 3-1/2

multimeter is perfect for students, and
professionals alike because of its user
interface and size. This palm sized de-
vice has functions such as a backlight,
data hold, low battery indication, and
A convenient method for marking wire, cable, and terminals. Tape overload protection indication. The
has numbers from 0 thru 9. Self adhesive, oil and solvent resistant. MT-1233D complies with the newest
233A2.................................................................................$62.95 CE safety standard.

MT-1233D............................................................................$16.95
WIRE MARKING TOOL
DIGITAL MULTIMETER

This rugged multimeter is designed

to give reliable, accurate readings
under the most extreme conditions.
Measures voltage, amperage, re-
sistance, continuity, capacitance,
temperature, frequency, and diode
checks. Positive stop rotary switch
Bogert Aviation’s Wire Marking Tool takes the guess work out of wiring selects any of over 40 different func-
jobs. Add a colored stripe to insulated 24-8 gauge wire for quick tions. 1 year warranty.
identification using the non-conductive nylon tool and a permanent
marker. Aircraft wire, Romex, Cat 5, coax and data transmission ca-
ble are cleanly and easily identified by using different colored stan- MT-1280............................ (Heavy Duty)..............................$41.95
dard Sharpie markers. No batteries or specialty supplies needed. MT-1232..............................(Economy)...............................$44.95
BO-40M-WMT.......................................................................$47.95
ANALOG MULTIMETER
The MT-2017 analog meter is perfect
for field maintenance and complies
SEAL ALL TERMINAL RELEASE TOOL with 2008 CE safety standards. It has a
mirrored aluminum dial plate for easy
reading, and can be used for resis-
tance, current, and voltage measure-
A must have tool for working with
ments. The MT-2017 has a 20kOhm/V
Seal-All shells and terminals. De-
DC and 9kOhm/V AC input sensitivity.
signed to depress Seal-All retention
This zero center meter also features a
barbs to allow terminal removal
continuity buzzer, battery test, and tran-
from shells.
sistor hFE test.
MT-2017..............................................................................$31.95

WHTSATRT...............................................................................$9.95 DUAL DISPLAY MULTIMETER W/USB INTERFACE

The Pro Digital Multimeter with USB con-
nector features a touch bad instead of
32 PIECE ELECTRONICS REPAIR KIT the traditional mechanical knobs. With
A complete 32-piece precision a large LCD screen and easy operation
tech kit for electronics repair, In- this unit is perfect for measuring AC/DC
cludes a wide variety of Torx, Torx voltage and AC/DC current. Additional
Security, Phillips, Slotted, Hex and functions include current, resistant, ca-
Pentalobe bits for repairing most pacitance, frequency, temperature
electrical components. Tool kit measurements. It also includes an on-
comes with a heavy duty storage board diode tester to quickly test transis-
and carrying case with a locking tor and diodes. This unit also includes a
slide. USB port to connect to a computer for
data logging purposes.
GT661.................................................................................$27.95 MT-1860............................................................................ $100.95

800-248-0638 AIRCRAFT TOOL SUPPLY www.aircraft-tool.com 99

 ELECTRICAL
BATTERYMINDER® AVIATION BATTERY SCHAUER® AVIATION BATTERY CHARGERS
CHARGER/MAINTAINERS

JAC0512/JAC0524

12248/24041 24041-AA-S3

Rated #1 by Aviation Consumer Magazine, the BatteryMINDER®

JAC0212/JAC224
Charger/Maintainer/Desulphator-Conditioner uses the latest in mi-
croprocessor controlled algorithms, coupled with several patented Schauer’s intelligent charger design follows the battery impedance
desulphation-recovery circuits to fully charge, maintain and condi- to the end of the charge cycle for all battery types, thus ensuring a
tion all type/size/brands of lead-acid batteries -- including those by full charge with virtually no danger of overcharging or cooking the
Concorde, Gill, and EnerSys. battery.
• Fully automatic 3 stage • Rejects damaged battery • Charge control: constant current charge to a constant voltage,
charging • Spark-proof then float standby.
• Patented random sweep • Optima/AGM/Lower Temp. • Fully automatic 3 stage charger can be left on the battery in
desulphation Mode maintaining mode.
• Polarity reversal indicator • Built-in battery condition • For any type lead-acid battery, including conventional, mainte-
• Short circuit and reverse indicators nance free, deep cycle, gelled-type, valve regulated batteries.
polarity • Automatic temp comp. • Finishing voltage: 2.28V per cell float; 2.4V per cell finishing.
• Auto-reset thermal breaker • Will start charging a deeply discharged battery with less than 4
volts.
PART VOLT AMPS DESCRIPTION PRICE • Current limiting, and short circuit proof
128CEC1-AA-S2 12 2/4/8 For use with Gill/ $241.95 • Reverse polarity protection (except 2 amp models).
244CEC1-AA-S2 24 2/4/8 non-LT/7000 series $241.95 PART AMPS VOLTS FEATURES PRICE
Gil LT/7000 series, JAC0212 2 12 With Battery Clips $31.95
128CEC1-AA-S3 12 2/4/8 $241.95
Odyssey, and JAC0512 5 12 With Ring Terminals $83.95
244CEC1-AA-S3 24 2/4/8 $241.95
Hawker JAC0224 2 24 With Battery Clips $31.95
ALL Concorde JAC0524 5 24 With Ring Terminals $83.95
128CEC1-AA-S5 12 2/4/8 12V Aviation AGM $241.95
244CEC1-AA-S5 24 2/4/8 (Absorbed Glass $241.95
Mat) batteries
QUICK CHARGE AIRCRAFT AUXILIARY PLUG AND JUMP GROUND POWER PLUG
POWER UNIT/BATTERY CHARGER
Designed to supply filtered
11808
DC bus power through
standard APU receptacle
in private and commercial
aircraft. Up to 25 or 50 amp
is available for operating
avionics and flight control
systems when the master
11807
switch is activated. Can
also charge the battery
through the plug at a 10 The Plug and Jump is a very light weight portable unit. It can be
amp rate. Output is current and voltage limited for added safety. used to start your aircraft using standard jumper cables and a car.
DC current and voltage are displayed on panel meters. The Plug and Jump comes in two models; The Universal Model for
Cessna, Beechcraft, etc. (3 pin plug) and the single pin model for
PART DC DC AC POWER PRICE the Piper. It is not a battery in itself, but a simple conduit of power
AMPS VOLTS from any external power source to the aircraft. The Plug and Jump
APU14V/25A 25 12 117V 60HZ 3 AMPS $678.95 can be used for either 28 or 14 V systems.
APU28V/25A 25 24 117V 60HZ 6 AMPS $762.95 11807.......................... (3 Pin Unit - Cessna)........................$81.95
APU28V/50A 50 24 117V 60HZ 12 AMPS $896.95
11808.........................(Single Pin Unit - Piper)....................$100.95

100 800-248-0638 AIRCRAFT TOOL SUPPLY www.aircraft-tool.com

 ELECTRICAL
SCHAUER® AVIATION BATTERY BATTERY TERMINAL TOOL
CHARGER/GROUND POWER UNITS

JAC2024H-1

This unique tool is designed to provide positive tightening of battery

terminals on popular brands of lead/acid aircraft batteries without
over-torquing and without the danger of an electrical short. The tool
is made from steel for rugged service and is fully insulated with a
rubber hand grip for protection against electrical shorts.
BO-11M-BTT.........................................................................$22.95

JAC2512-3
BATTERY TERMINAL SOCKET
This patented socket design by an
A&P mechanic solves the problem of
Schauer’s battery charger/GPU features computer-controlled bat- battery terminal damage once and
tery charging. for all. This remarkable tool removes
and installs terminals effortlessly and
• Charge control: constant current charge to a constant voltage, without damage to the nuts or posts.
then float standby. A torque-limiting feature makes it less
• Fully automatic 3 stage charger can be left on the battery in likely to strip it or snap the stud. Uses
maintaining mode. any socket or box end wrench.
• Can be set for any type lead acid battery, including convention-
AGE01.................................................................................$16.95
al, maintenance free, deep cycle, gelled-type, valve regulated
batteries.
• Cyclic voltage: FLOODED 2.5 volts/cell; GEL & AGM 2.4 volts/cell.
BATTERY TERMINAL & WIPER ARM PULLER
2.6 volts/cell for 36 & 48 volt batteries. May be preset to custom-
er’s specification for battery type. • Tips are made from
• Will start charging a deeply discharged battery with less than 4 strong heat-treated steel
volts. • For most popular clamp
• Current limiting, Reverse polarity, and short circuit proof. sizes
PART VOLT AMPS DESCRIPTION PRICE • Tapered tips provide
range and squeezing the
JAC2512-1 12 25 Charger/GPU with Single $235.95
handles expands the tips
JAC2024H-1 24 20 Pin $279.95
to cover many clamp
JAC2512-3 12 25 $279.95 sizes
Charger/GPU with 3-Pin
JAC2024H-3 24 20 $355.95
Dual use pliers spread battery post clamps and tapered, ribbed
tips remove corrosion and build-up from inside the clamp. Tips are
made from strong heat-treated steel.
55410..................................................................................$16.95
3 WAY BATTERY TOOL

IMPERIAL® BATTERY CABLE CUTTER

A powerful set of cutters

specifically designed to
cut through copper bat-
tery cables. Easily cuts
through cables as thick as
Cleans and Removes Corrosion on Battery Posts and Terminals. Ta- 2/0 gauge. Cushioned grips
pered reamer cleans and shapes terminal clamps. Positive and for comfort. Not for use on
negative post cleaners are sized to fit battery posts. steel cables.

11550....................................................................................$9.95 BS103..................................................................................$19.95

800-248-0638 AIRCRAFT TOOL SUPPLY www.aircraft-tool.com 101

 PRECISION MEASURING
VERNIER CALIPERS ECONOMY DEPTH MICROMETERS

52-058-008

52-057-004

• Fine quality vernier calipers are constructed of stainless steel.

• 52-057-004 offers 3-way measurement to .001” accuracy.
• Satin chrome finish • Ratchet thimble
• 52-058-XXX series offers 4-way measurement in both inch and metric.
• .001” Graduations • Locking clamp
PART RANGE GRAD FEATURE PRICE • 4” wide base • Includes wooden case.
52-057-004 0-4” .001” Pocket caliper $54.95 • Base surface hardened, ground
52-058-008 0-8” .001”/.02mm Fine adjusting $75.95 and lapped
52-058-012 0-12” .001”/.02mm Fine adjusting $115.95
PART RANGE GRAD PRICE
52-225-114 0-4” .001” $145.95
52-225-116 0-6” .001” $184.95

SHOCKPROOF DIAL CALIPERS WITH THUMBROLL!

ECONOMY OUTSIDE MICROMETERS

• .0001” reading
• Carbide tipped anvils
• Ratchet thimble and
locking nut
• 0.100” range per revolution • Resolution to 0.001” • Microfine graduations
• Stainless steel construction • 4-way measuring jaws • Includes standards on
• Silky smooth movement • Supplied in molded case sets and sizes over 1”
• Also includes wrench
PART RANGE GRAD DIAL FACE PRICE
and fitted case
52-008-706 0-6” .001” White $79.95
52-008-707 0-6” .001” Black $79.95 PART RANGE GRAD PRICE
More options available online at www.aircraft-tool.com 52-229-201 0-1” .0001” $79.95
52-229-202 1-2” .0001” $77.95
52-229-203 2-3” .0001” $75.95
52-229-213 0-3” set of 3 micrometers plus case $219.95
6” ECONOMY DIAL CALIPER

UTILITY MICROMETER

The rugged, 6” Dial Caliper is made from hardened stainless steel

for the utmost in accuracy and durability. The large, clear dial ac-
curately reads to .001 and has an adjustable bevel for zero setting.
The body of the caliper features a satin chrome scale with etched
graduations, and a covered rack prevents dirt and chips from en- The satin chrome barrel and thimble offer easy to read etched
tering the gear mechanism. There is also an adjustable stop rod for black graduations, and the spindle is equipped with a lock for tak-
taking depth measurements. ing repetitive measurements.
GT107.................................................................................$47.95 GT102.................................................................................$23.95

102 800-248-0638 AIRCRAFT TOOL SUPPLY www.aircraft-tool.com

 PRECISION MEASURING
COMBINATION SQUARES DIAL BORE GAUGE SETS

• Carbide anvils • Chrome plated handle

• Easy-to-read • Insulated grip
• Includes extension holder & case • Economical
• Protractor has level
• Square head has level and scriber point PART RANGE GRAD PRICE
• Includes square head, center head and protractor 52-646-300 2-6” .0005” $145.95
• Double-indexed protractor is graduated 180 degrees in both 52-646-400 1.4”-6” .0005” $189.95
directions
PART SIZE GRADS PRICE
PLUNGER DIAL INDICATOR
52-375-012 12” 32nd, 64th. 50th, 100th $248.95
52-375-018 18” 32nd, 64th, 50th, 100th $239.95 The highly sensitive plunger detects
small imperfections in your stock or
machine with accuracy to .001 . The
2-1/2 diameter face can be rotated
CALIPERS AND DIVIDERS
for setting at any point, and includes
adjustable limit indicators for marking
important readings. There is also a
lug mount on the back of the Dial for
mounting to a magnetic base.
GT109.................................................................................$25.95
These spring-joint cali-
pers and dividers are
AGD INDICATOR AND FINE ADJUST MAGNETIC BASE
fully hardened and heat
treated. Brushed finish.

PART SIZE PRICE DIAL AND

3304 4” $11.95
MAGNETIC BASE
3314 4” $10.95
3324 4” $10.95 • Indicator Features:
• 1” travel
• AGD group 2
• 2-1/4” dial diameter
MICROMETER STAND • Reading: .001”
• Continuous reading 0-100

• Magnetic Base Features:

• 85 lb. pull
• Fine adjustment
• V-bottom base

52-247-005 52-247-000
52-585-110.......... (Dial and Magnetic Base Set)............... $155.95
Fowler micrometer stand adjusts to any position. Provides a mea-
suring position and angle for outside micrometers and other instru- P52-520-109..............(Black Face Dial Only)......................$73.95
ments. P52-520-110............. (White Face Dial Only)......................$91.95
52-247-005.......................... (Folding).................................$55.95 P52-520-129........... (High Precision Dial Only)..................$117.95
52-247-000........................(Adjustable)..............................$82.95 52-585-005................ (Magnetic Base Only).......................$49.95

800-248-0638 AIRCRAFT TOOL SUPPLY www.aircraft-tool.com 103

 PRECISION MEASURING
10’ DECIMAL AND METRIC TAPE MEASURE FRACTION+ DIGITAL CALIPER

For ultra precise measure-

ments in both decimal read-
ing and metric. The decimal
scale is graduated in 50th
(.02) of a foot for the first foot
and 10th of an inch for rest
of the tape. Metric graduat-
ed in millimeters throughout
the blade.

7210.................................................................................... $14.95

This 6” stainless steel digital caliper measures

in decimal, millimeters, and fractions with
EZ READ RULES guaranteed accuracy to 0.001”. Rugged
metallic display housing superior to plastic
digital display cases. Resolution 0.0005”
(0.01mm). Accuracy 0.001” (0.02mm). Auto
on/off feature.
The combination of a black chrome finish and precisely etched
white graduations make these rules very easy on the eyes. Manu-
GT1433.................................... (3”).....................................$19.95
factured from a hardened steel for flexibility and durability.
GT146...................................... (6”).....................................$29.95
PART LEN WID GRAD PRICE GT1478.................................... (8”).....................................$59.95
EZ6 6” 1/2” 10th, 100th, 32nd, 64th $10.95
EZ12 12” 1/2” 10th, 100th, 32nd, 64th $20.95
EZ18 18” 3/4” 10th, 100th, 32nd, 64th $39.95 ROUND HEAD PROTRACTOR
EZ24 24” 3/4” 10th, 100th, 32nd, 64th $59.95

SATIN CHROME STEEL RULES

Steel protractors are for setting bevels and measuring and marking
PART LEN WID GRAD PRICE angles. It has permanently etched graduations for 0 to 180 degrees
52-340-006 6” 3/4” 32nd, 64th, 10th, 100th $10.95 in opposite directions. It has a 3-3/8-Inch by 2-Inch head. The 6-Inch
52-340-012 12” 1-1/8” 32nd, 64th, 10th, 100th $25.95 adjustable protractor arm locks into desired position with knurled
52-340-018 18” 1-1/8” 32nd, 64th, 10th, 100th $39.95 thumb nut.
52-340-024 24” 1-1/8” 32nd, 64th, 10th, 100th $56.95 GT18...................................................................................$14.95

STEEL PROTRACTOR
ANGLE PROTRACTOR
A practical tool for measur-
ing and duplicating difficult The 6” adjustable arm is ideal for setting
angles where a standard bevels, taking measurements and transfer-
protractor cannot fit. Mea- ring angles. Ultra-fine etched graduations
sure and mark the degrees read from 0 to 180 degrees in forward and
of an angle on outside, in- reverse directions, and will not wear or rub
side and sloped angles. Fine off. Made of ground stainless steel for preci-
black graduations from 0° to sion and durability.
165° in opposite directions.
GT29.....................................................................................$5.95 GT17................................ (Mechanical).............................$16.95

104 800-248-0638 AIRCRAFT TOOL SUPPLY www.aircraft-tool.com

 PRECISION MEASURING
SCREW PITCH GAUGES CONTOUR GAUGES
Set of 51 screw pitches
combines all sizes from
4 to 84, including 11-
1/2 and 27 pipe thread
sizes. Knurled thumb
nuts lock the case in an
open or closed position.
Contour gauges are designed for
GT251.................................................................................$54.95
precise surface duplication in sheet
metal work. The 35 ultra-thin pins
per inch assure that you are getting
an exact replication of your copied
RADIUS GAUGES shape. Capable of duplicating sur-
faces up to 3-1/2” deep.
Precision ground gauges
GT837...................................... (6”).....................................$10.95
are used to check lay-
outs and radii. Each has GT833..................................... (10”)....................................$21.95
a concave and a convex
radius. Stamped radius size
on each lead. All gauges
have a locking device. TELESCOPING GAUGES
PART SIZE GRAD PRICE
52-470-100 1/32”-1/4” 64th $35.95
52-470-102 17/64”-1/2” 64th $39.95
52-470-120 1/32”-17/64” 64th $36.95
Individual sizes
52-470-121 9/32”-33/64” 64th $43.95
available online at
www.aircraft-tool.com.

FEELER GAUGE
Feeler gauges are used for ad- Double action (self-centering) contact point ends are made of
justing and gauging spark plugs, hardened tool steel and precision ground on a radius of the small-
distributor points and valve clear- est hole the gauge will enter. This kit has size range 5/16” to 6”.
ances, or any other instance of
measuring the space between 903...................................(Complete Kit).............................$39.95
two parts. Precision Series Gauges
are made of high-grade precision
steel with etched numbering for
easy identification. FULL BALL HOLE GAUGES
GT226.............................(.0015 to .025 .)........................... $24.95
68050.................... (11 Offset Blades, 1/2” x 4”)....................$6.95
68100.....................(31 Blades .0015” to .035”).....................$8.95

Individual sizes available online at

www.aircraft-tool.com.

SHEET METAL AND WIRE GAUGES Ball hole gauges are used to determine
the diameter of small holes. They will
Gauge numbers are U.S. measure inside diameters of holes and
standard 0 to 36. Decimal grooves ranging from 1/8” to ½”. Makes
equivalents are stamped on an ideal companion for our telescoping
reverse side. gauges. Complete set Range: .125-.500”.
set of 4 gauges includes part numbers:
97A, 97B, 97C, and 97D.
21............................... (Sheet Metal Gauge)....................... $20.95
20......................................(Wire Gauge).............................$20.95 97S...................................(Complete Kit).............................$29.95

800-248-0638 AIRCRAFT TOOL SUPPLY www.aircraft-tool.com 105

 TEST & INSPECTION
ATS DIGITAL PROTRACTOR

• Large LCD display degrees

• Self Calibrating • Reads all angles in a 360o
• Resettable zero point for range
relative readings • Batteries included
• Accurate to within +/- 0.1
This ATS Digital Protractor provides absolute measurement and relative measurement to an accuracy of 0.1 degree. The 2.75” wide
by 1.50” high LCD screen display automatically flips upright when turned upside down. It’s self calibrating and delivers repeatable
readings to within +/- 0.05 degrees (0.1 degree overall accuracy of level or plumb). The frame is extruded aircraft grade 6061
aluminum, with precisely flat measuring surfaces, and the upper surface has a V-groove to aid measurement on curved surfaces.
Includes carrying case with belt clip.
ATS360...............................................................................................................................................................................$149.95

360° DIGITAL PROTRACTOR (PRO360) TRUTACH II DIGITAL PROPELLER TACHOMETER

The all digital TruTach II measures propeller RPM to a remarkable ac-

This precision instrument is engineered to be accurate to within 1 curacy of 1 RPM. It features a digital signal filter that eliminates noise
degree of level and plumb, it provides a full 360 degree reading and gives solid readings. TruTach II works on single or multi-engine
so that the unit may be used accurately, even upside-down. Read- propeller aircraft with 2, 3, 4, or 5 blades, and it never needs adjust-
ing hold feature lets you take a reading in any situation. Machined ment. Easily check calibration anytime with a standard light. RPM
aluminum frame will take just about any punishment. Batteries are Range 240 - 7000 RPM. Uses a standard 9 Volt battery (included).
included. 1-year warranty. Compact 3.8 x 2.4 x 1.5 inches and weighs just 4 Ounces. Includes
impact resistant carrying case. 5 Year Warranty. Designed by Pilots
PRO360............................................................................. $249.95 for Pilots.
TRUTACH2.......................................................................... $241.95
DIGITAL TORQUE ADAPTER/CALIBRATOR PRECISION PROPELLER PROTRACTOR

• 1/2” drive • LED backlight

• Measures in: Kg-CM, Kg-M, • Swivels 240 degrees
in-lb, ft-lb, and N-m • Screen flips 180 degres
The 23-1990 Propeller Protractor is a 4-way precision instrument that
• Range: 50-600 ft-lbs • 10 Memory settings
measures angles directly between two surfaces, or any number of
This digital torque adaptor also serves as a calibration device for surfaces, such as setting a detachable blade type propeller on an
torque wrenches. Use it to convert any ratchet wrench into a digital airplane. Snug fitting circles are tooled to close tolerances that mini-
torque wrench. Can also be used to verify the calibration of any mize the error and play found in other protractors. It has a matte
type of torque wrench. Includes a calibrating block. finish to cut glare. This facilitates quicker and easier readings.
23154................................. (1/2” Drive)...............................$57.95 WD-PP1............................................................................... $45.95

106 800-248-0638 AIRCRAFT TOOL SUPPLY www.aircraft-tool.com

 TEST & INSPECTION
ATS “VOYAGER” VIDEO BORESCOPE
Includes 3
Tip Mirrors

70° Forward Oblique

90° Right Angle

110° Rear Oblique

• 2-Way Articulation 120° side to side (240° total)

• 6mm (0.24”) diameter probe fits spark plug holes
• 1 meter (39.4”) flexible shaft
• Side lighting virtually eliminates tip mirror glares and streaks
• Includes 3 tip mirrors: 70° forward, 90° right, 110° rear
• 70° Field of View (FOV), Focal Range: 15mm to infinity
• Illumination from 4 forward LEDs (and 2 glare-free LEDs)
• 3.5 “ high resolution full color LCD display Scan to view
• Records video and images at full 640x480 VGA onto SD card video
• Built-in rechargeable battery lasts up to 6 hours

The state-of-the-art ATS Voyager videoscope features an articulating tip that swings 240 degrees to reach every inspection point of an
airplane. With a simple turn of the control knob, you can move its Stainless Steel-sheathed tip from side to side to look left, right, and even
backwards, giving you unprecedented access to areas that simply cannot be reached with a straight probe. Included with the ATS Voyager
are three (3) tip mirrors to look 70°, 90°, and 110° to the normal line of sight. And on that score, the ATS Voyager features a remarkable innova-
tion that places an extra set of LED lights to the side of the probe, which when activated, successfully eliminates the glare and spots that are
sometimes present when looking through a mirror. The result is an absolutely crystal clear, well lit, image through the tip mirror. The camera
captures video and stores them onto an SD card. The 3.5” display shows images with excellent clarity. The flexible 1 meter probe bends to
any shape, while the sealed 6mm tip will resist dirt, scratches, and abrasions associated with normal use.
ATS-VS22...................................................................................(Complete Kit)............................................................................ $1,399.95

ATS BORESCOPE FIELD KIT

This complete accessory field kit will make for a well-practiced inspection. The ATS Borescope Field
Kit includes the ATS-VS22H Holding Tube and the ATS-VS22B Field Bag.
The ATS-VS22H Holding Tube lends support to the flexible probe and gives it the rigidity that is neces-
sary to reach into deep recesses while maintaining the precise control and freedom the new video-
scopes offer.
The ATS-VS22B Field Bag will give you the extra hand needed to perform a full inspection. This heavy
duty protective bag will keep your valuable videoscope safe from harm in the field. It includes a set
of harnesses that wrap around your neck and waist and suspends your unit.
ATS-VS22H.................................................................................(Holding Tube)..................................................................... $59.95
ATS-VS22B....................................................................................(Field Bag)........................................................................ $69.95
ATS-VS22K......................................................................(Field Kit with bag and tube)........................................................ $125.95

800-248-0638 AIRCRAFT TOOL SUPPLY www.aircraft-tool.com 107

 TEST & INSPECTION
USB ARTICULATING BORESCOPE

The new Vividia VA-400 is a USB controlled video borescope with a variable 1-way articulating tip that connects to any Android™ or Windows™
device. The probe, at only .33” (8.5mm) diameter, will fit into a spark plug port for cylinder inspections. The articulating tip swings through a full
180° to see the valves, wall, piston, and rings. The VGA resolution (640x480) camera auto-focuses from 1.57” (40mm) to 16” (400mm). And
it’s 6 LED tip lights serves to clearly illuminate the inspection area.
Best of all, the VA-400 is USB controlled, which means that you can view and record your inspections using a compatible phone, tablet, or
laptop. It’s an excellent and affordable addition to every mechanic’s and IA’s tool kit.
VA-400........................................................................................ (Unit Only)................................................................................... $199.95
VA-400-A............................................................ (Unit With WiFi Adapter for Apple Devices).......................................................... $295.95
VA-B2..........................................................................(WiFi Adapter for Apple Devices)................................................................. $109.95

INSPECTION MIRRORS 3X POWER MAGNIFYING TELESCOPING MIRROR

S22 C22

Use the Telescoping Magnifying Mirror to inspect small objects in

areas that are out of reach or obstructed. The 3x glass magnifying
E22 B22
mirror can be helpful when checking the bottom end of a motor for
leaks, etc. The stainless steel telescoping wand extends from 8-1/2”
All angle ball joint. Insulated vinyl grip. to 29” in length.
PART FACE DESCRIPTION PRICE 316M......................... (2-1/2” x 3” Rectangle)......................$14.95
S22 3-1/2”x2” 16” Telescoping $10.95 GT759563................(2-1/2” Diameter Round).....................$14.95
E22 2-1/4” dia. 14” Telescoping $10.95
C22 1-1/4” dia. 8-1/2” long with clip $8.95 TELESCOPING LIGHTED INSPECTION MIRROR
B22 1”x2” 8-1/2” long with clip $7.95

TELESCOPING MAGNETS
Our Lighted Telescoping Inspection Mirror allows you to peer into the
Use to pick up ferrous dark crevices of your work space in search of leaks, breaks or lost
metal parts and tools. tools. The telescoping shaft extends and the shatter-resistant mirror
Lifts up to 1 lb. sits on a 360 degree swivel head for accurate positioning.
02............................................ (18”)......................................$6.95 GT80560............................(Rectangle)...............................$16.95
03................................ (8” with pocket clip)..........................$6.95 GT80557............................... (Circle)..................................$16.95

108 800-248-0638 AIRCRAFT TOOL SUPPLY www.aircraft-tool.com

 TEST & INSPECTION
TELESCOPING LIGHTED MAGNET & MIRROR SET INFRARED THERMOMETERS

The Heat Seeker Infrared Thermometers

are precision measuring devices used
to obtain accurate temperatures without
having to contact the object being mea-
sured. It works by capturing and measur-
ing the invisible infrared energy naturally
emitted by all objects. It offers an easy
and safe way to measure surface tem-
peratures of objects which are difficult or
unsafe to contact. They have a rugged,
The pickup wand features a bright white LED light at the end of the
ergonomic design and feature a backlit
chrome plated shaft that telescopes to 26”. The magnet lifts up to
LCD display with built-in laser sighting. The
5lbs, and shielded so it wont attract peripheral objects. The 2-1/4”
practical distance-to-spot ratio of 8:1 is
diameter oversized mirror is mounted on a universal joint that adjusts
suitable to accurately measure cylinder
to any angle, and the chrome plated shaft telescopes to 36”. Both
head, exhaust, manifold, and brake tem-
the pickup and mirror feature foam covered handles for comfort.
peratures.
Complete set includes a carrying case.
ELB910.................................................................................$19.95 IRT670.................................. (14000 F)...............................$220.95
IRT657...................................(1076°F)..................................$52.95
55010............................... (-26°F - 842°F).............................$29.95
PICKUP TOOLS

395 396 TELESCOPING FLASHLIGHT WITH MAGNET

GT7039X

Excellent tool for picking up parts in hard-to-reach areas.

395............................ (20” Magnetic Pickup)........................$7.95
396................................ (18” Claw Pickup)............................$7.95
GT70396........................... (Lighted 24”)..............................$12.95
Here’s an LED flashlight with a twist -- it telescopes to 20” and has
GT70399........................... (Lighted 36”)..............................$13.95
a powerful magnet at the end to make it the ultimate magnetic
pickup tool. Simply extend the shaft, light up, and go!
DA75570............................................................................. $15.95
STEELMAN BEND-A-LIGHT

BINOCULAR MAGNIFIER

Bend-A-Light is a flexible high intensity light that bends to any con-

figuration and illuminates hard-to-reach areas where conventional
lighting cannot go. High intensity halogen bulb provides ample il-
lumination for any type of inspection task.
10150A.........................(16” Bend-A-Light)..........................$27.95

BRIGHTEYES PRO
The perfect solution when you
need a flashlight, but you need The Binocular Magnifiers offer powerful, crisp magnification of your
both hands free. It places two detailed projects while simultaneously leaving both of your hands
high-intensity beams wherever free to work. The ground and polished optical lens is mounted to
you look and allows both hands a tilt-up frame, allowing you to disengage the magnifier without re-
free to work. Batteries included. moving the entire assembly from your head.
80205..................................................................................$14.95 GT950-5..............................................................................$34.95

800-248-0638 AIRCRAFT TOOL SUPPLY www.aircraft-tool.com 109

 TEST & INSPECTION
MAGNAFLUX® SPOTCHECK DYE PENETRANT TEST KIT

MAGNAFLUX® ZYGLO™ PENETRANT TEST KIT

The General Purpose Dye Penetrant inspection kit is used throughout

the industry for the detection of surface defects. Suitable for the
inspection of most solids, Spotcheck Dye Penetrants give clear, vivid
indications of surface flaws, for just pennies a check. The compact
carrying case permits this complete, lightweight kit to be taken any-
where. Kit consists of 2 cans Spotcheck SP1 Penetrant, 4 cans SKC-S
Cleaner/Remover, and 2 cans SKD-S2 Developer. Includes brush,
cloth and instructions. 12 oz. aerosol cans.
SK816...............................(Complete Kit)...........................$198.95
SKL-SP2................(Penetrant, 12 oz. Aerosol Can)...............$22.95
SKD-S2................ (Developer, 12 oz. Aerosol Can)...............$20.95
SKC-S............ (Cleaner/Remover, 12 oz. Aerosol Can).........$17.95

MAGNAFLUX® PORTABLE SPOTCHECK KIT

Under the high-intensity Zyglo Black Light you see cracks and defects
as glowing signals - even ones you’d miss entirely by any other pen-
etrant test method. The Portable 100-watt Black Light, supplied with
the kit, is unique in its high-intensity black light output -- much higher
than standard lights. With this intense black light and the strongly flu-
orescent Zyglo penetrants, defects glow brilliantly in normally lighted
areas. With Zyglo you get increased inspection efficiency and ac-
curacy at a remarkably low cost. Kit consists of 1 can ZL-27A Pen-
etrant, 1 can ZP-9F Developer, 2 cans SKC-S Cleaner/Remover, and
the portable 100-watt Black Light (115 AC., 60Hz). Comes complete
with instructions, cleanup scrubs, and cloth.
ZA70.................................(Complete Kit)........................ $2,184.95
ZP-9F.................. (Developer, 12 oz. Aerosol Can)...............$22.95
ZL-27A.................(Penetrant, 12 oz. Aerosol Can)...............$38.95
SKC-S............ (Cleaner/Remover, 12 oz. Aerosol Can).........$17.95

An undetected crack can be deadly! Critical aircraft areas, espe-

cially around stud mounts, can and do crack. And sometimes the
flaw is too small to be noticed with the naked eye. That’s why you
MAGNETIC FIELD INDICATOR need the Magnaflux Spotcheck Portable Kit. It’s a complete dye
penetrant test kit containing everything you’ll need to find surface
defects in welds, castings, and forgings. The Spotcheck Portable Kit
An extremely sensitive magnetic field de- comes in a rugged plastic case and includes complete instructions.
tector used Magnaflux products to identify • 2 cans of SKC-S Cleaner/Re- • Marking Pen
defects in metals. Measures in the range of mover • Packet of SCRUBS™ Hand
-10 to 0 to +10 gauss. • 1 can of SKD-S2 Developer Cleaner
• 1 can of SKL-SP1 Penetrant • Wiping Cloth
• Carrier/Dispenser Pack • Complete Instructions
7308....................................................................................$66.95 SK416................................................................................ $115.95

110 800-248-0638 AIRCRAFT TOOL SUPPLY www.aircraft-tool.com

 ENGINE EQUIPMENT
AVIATION SPARK PLUG THREAD REPAIR KITS

HELI-COIL® SPARK PLUG REPAIR KIT (NON-SERRATED)

Using Heli-Coil® serrated aviation inserts is the only FAA approved These repair kits contains everything you’ll need to make on-the-
method of repairing damaged spark plug threads. It is also the only spot engine repairs. Includes piloted tap, and installation tool, and
method certified by engine manufacturers such as Teledyne-Conti- 24 inserts.
nental and Textron-Lycoming. Serrated inserts, unlike regular inserts, Note: Use of non-aviation Heli-coil inserts may not be approved for your
must be expanded and staked in place. These kits contain all the engine. Check with the manufacturer before using.
Heli-Coil tools you’ll need to do the job. They have a piloted tap,
insertion tool, offset and staking tool, expanding tool, 20 serrated PART DESCRIPTION PRICE
inserts (10 each ½” and 13/16” long inserts for the 18mm kit and 10
5523-18 18mm Spark Plug Repair Kit $262.95
each 3/8” and ½” long inserts for the 14mm kit), and instructions.
5523-14 14mm Spark Plug Repair Kit $237.95
PART DESCRIPTION PRICE
4260-18 18mm Aviation Spark Plug Repair Kit $1,599.95
2-50 Individual insert 18mm x 13/16”, each $9.95
2-52 Individual insert 18mm x 1/2”, each $8.95 HELI-COIL® INDIVIDUAL REPAIR PACKS
4260-14 14mm Aviation Spark Plug Repair Kit $1,329.95
137-43 Individual insert 14mm x 3/8”, each $8.95
Heli-Coil has the most effective and
137-22 Individual insert 14mm x 1/2”, each $8.95
universally accepted method of
thread repair. Damaged threads can
be restored to better-than-new condi-
tion. Each pack includes inserts, inser-
tion tool, and tap.
HELI-COIL® MASTER REPAIR KIT

PART SIZE PRICE PART SIZE PRICE

5401-04 4-40 $73.95 5402-06 6-40 $102.95
5401-05 5-40 $99.95 5402-2 8-36 $115.95
5401-06 6-32 $79.95 5402-3 10-32 $79.95
5401-1 12-24 $69.95 5402-4 1/4-28 $79.95
5401-2 8-32 $87.95 5402-5 5/16-24 $83.95
5401-3 10-24 $69.95 5402-6 3/8-24 $90.95
5401-4 1/4-20 $69.95 5402-7 7/16-20 $90.95
5401-5 5/16-18 $76.95 5402-8 1/2-20 $125.95
5401-6 3/8-16 $73.95 5402-9 9/16-18 $167.95
5401-7 7/16-14 $79.95 5402-10 5/8-18 $178.95
5401-8 1/2-13 $111.95 5402-12 3/4-16 $205.95
Kit includes taps, inserts, drill specifications and instructions for re-
pairing a wide range of the most commonly experienced coarse
thread repair problems. Includes inserts in the following sizes (and
quantity): 1/4x20 (12), 5/16x18 (12), 3/8x16 (12), 7/16x14 (6), 1/2x13 For complete engine tools visit our website
(6), 5/8x11 (6). Custom molded case also included. www.aircraft-tool.com
4934.................................................................................. $412.95

800-248-0638 AIRCRAFT TOOL SUPPLY www.aircraft-tool.com 111

 ENGINE EQUIPMENT
ATS PRO DIFFERENTIAL PRESSURE TESTER KIT

Lifetime Warranty

I don’t have to tell you how aggravating it can be to reach

down into the cowling to get to those spark plug holes for
a quick leakdown check. It’s a real pain to get the hose to
reach the spark plug hole without contorting your arm into
pretzels. Well, agonize no more, because we’ve paired our
top of the line ATS 2EM Differential Pressure Tester (with Mas-
ter Orifice) with our Spark Plug Port Extension Tool to make
your life a whole lot easier. Order this kit now and you’ll never
18MM-XT dread doing a leakdown test again.
2EM

2EM-KIT....................................................................................... (With 2EM)................................................................................... $129.95

2E-KIT........................................................................................... (With 2E).................................................................................... $110.95
18MM-XT......................................................... (18MM Extension For ATS Compression Testers)......................................................... $29.95
14MM-XT......................................................... (14MM Extension For ATS Compression Testers)......................................................... $29.95
12MM-XT......................................................... (12MM Extension For ATS Compression Testers)......................................................... $29.95
E18MM-XT................................................... (18MM Extension For EASTERN Compression Testers)..................................................... $39.95
E14MM-XT................................................... (14MM Extension For EASTERN Compression Testers)..................................................... $39.95

DIFFERENTIAL PRESSURE TESTER W/ MASTER ORIFICE DIFFERENTIAL PRESSURE TESTER

Lifetime Warranty
Lifetime Warranty

The Model 2EM Differen- Our own make comes

tial Cylinder Pressure Tester with on-off safety valve
combines the features of to eliminate hose pres-
our popular 2E tester, and sure when disconnecting
a Master Orifice into one from the cylinder. Use it
tool. Check your engine’s to check valves, cracked
leakdown rate against a or worn rings, defective
calibrated standard in ac- cylinders, worn bushings,
cordance with Continen- etc. Includes hose, plug
tal’s Service Bulletin SB03-3. adapter, and complete
instructions.

2EM.............................. (For Up to 5” Bores)....................... $109.95 2E................................. (For Up to 5” Bores).........................$89.95

2EM-14............................(W/14mm Adpt).......................... $109.95 2E-14...............................(W/14mm Adpt)............................$89.95
2EM-60..........................(For Over 5” Bores)....................... $109.95 2E-60.............................(For Over 5” Bores).........................$89.95

112 800-248-0638 AIRCRAFT TOOL SUPPLY www.aircraft-tool.com

 ENGINE EQUIPMENT
ENGINE TEST KIT

The ATS engine test kit has all the test equipment needed to check engine compression, synchronize magnetos, time aircraft
engines, and test the aircraft ignition leads in one tool box. The kit contains: 2E (or 2EM) pressure tester; 8” extension tube; LED52
magneto synchronizer; Eastern E25 timing indicator; Eastern E5 cable tester; and a tool box.
EK5............................................................................................... (With 2E).................................................................................... $399.95
EK5EM..........................................................................(With 2EM and Master Orifice)................................................................... $385.95
EK5T.......................................................................... (2E W/ US Industrial Cable Tester)................................................................. $335.95
EK5EMT..................................................................... (2EM W/ US Industrial Cable Tester)................................................................ $349.95

ENGINE CALIBRATION & SET UP KIT AVIATION LABORATORIES ENGINE OIL ANALYSIS KIT
Aviation Laboratories’ test kit
determines the condition of oil
wetted engine parts even on
the first sample. The kit includes
1 test kit, and all lab work for
each kit. This oil analysis kit is
used for determination of the
condition of oil wetted engine
parts, even on the first sample.
Aviation Laboratories will ana-
lyze 12 wear metal elements
for piston and turbine engines, and post the results online for your
This kit gives you the innovative tools to help eliminate mistakes when private review. The analysis is usually completed within 24 hours,
getting your engine timing done. Kit includes a compression whistle, and if they detect an abnormal condition, they will contact you im-
a Top Dead Center Indicator, a Crank Stopper, and a complete set mediately to alert you to potential engine problems. Complete kit
of adapters for 18mm, 14mm, and 12mm spark plugs. includes sample bottle, siphon hose, and full instructions.
7891.................................................................................. $132.95 AVL-GA001..........................................................................$21.95

800-248-0638 AIRCRAFT TOOL SUPPLY www.aircraft-tool.com 113

 ENGINE EQUIPMENT
MASTER ORIFICE TOOL ELECTRONIC MAGNETO SYNCHRONIZER

6469 646953A
The Master Orifice Tool is required by Continental’s SB03-3 Service “Small and reliable. It’s exactly what I needed to time the mags on my air-
Bulletin. Use it with Eastern’s E2, or our own 2E Differential Pressure plane. I keep it in the toolbox on-board just in case.” ~S. Grant
tester to determine your calibrated leakage reading prior to engine Revolutionary design uses a high frequency electronic signal in-
testing. It is available in either plated steel (SPX), or non-sparking stead of high voltages to determine when the points of the mag-
brass (ATS). Note: This tool is not needed by our (ATS) 2EM or Eastern’s neto break. It will reliably indicate breaks so that you can accurately
E2M, as they already have a built-in master orifice. adjust the magneto’s internal timing, or synchronize it to the aircraft’s
6469................................... (ATS Model)...............................$75.95 engine. Completely safe and foolproof. Dimensions are 3”x5”x2-
646953A............................(SPX Model)...............................$99.95 5/8”.
LED52.......................... (Dual Mag, w/ Tone)........................$62.95
LED51......................... (Single Mag, w/ Tone).......................$56.95

BENDIX MAGNETO P-LEAD ADAPTER

This unique design of the P- MAGNETO TIMER
lead Adapter allows you to
connect to the timer leads
of Bendix magnetos with an
immediate and positive con-
nection. It provides secure
and stable alignment, and
includes a post that prevents
the timer leads from falling off.
This tool simplifies magneto timing on TCM (Continental) series 470,
PART WORKS WITH BENDIX PRICE 520, and 550 engines. No protractor on the spinner required, or oth-
8765 Early S4, S6 & S20 mags (3/8” p-lead) $35.95 er complicated tooling. Simply place it over the prop nuts and sight
8766 All other S series mags (1/4” p-lead) $35.95 down the casing split to set the timing. That’s all there is to it. It’s fool-
8767 D2000 & D3000 series mags $35.95 proof. Comes with instructions right on the tool for easy reference.

8768 Set of all 3 adapters $95.95 CCMT-01.............................................................................$41.95

MAGNETO E-GAP TIMING KIT

MAGNETO LOCKING TOOLS

ML20 T118

Use this to lock magnetos and maintain the correct timing position
The Magneto Internal Timing Kit is used to set the “E” Gap on Bendix
prior to removal or installation of the magneto.
S-20, S-200, S-400, S-500, and S-1200 series aircraft and industrial
ML20..........................(for Bendix magnetos).........................$6.95 magnetos. Complete kit with instructions included.
T118............................ (for Slick magnetos)..........................$6.95 11-8150............................................................................ $115.95

114 800-248-0638 AIRCRAFT TOOL SUPPLY www.aircraft-tool.com

 ENGINE EQUIPMENT
SLICK® MAGNETO OVERHAUL TOOL KIT

EASTERN MAGNETO SYNCHRONIZER

The Eastern “buzz-box” magneto

synchronizer is perhaps the most
well known of its type. Its simple
design makes it absolutely fool-
proof. Just attach the leads to the
magneto, and adjust until you see
the lights and hear the buzz!

E50.................................................................................... $121.95 Slick magnetos must be overhauled every time you perform an
engine overhaul. Additionally, they must be overhauled whenever
there is a lightening strike, or sudden engine stoppage. This kit con-
HIGH VOLTAGE CABLE TESTER tains all of the tools you will need to perform a complete magneto
overhaul in accordance with Unison Industries L-1037 and L-1363B
Service manuals. The complete kit contains: Bearing Assembling
• Fail-safe circuitry Plug, Rotor and Frame Assembling Plug, Puller, Base Adapter Plate,
• Unbreakable case Timing Pin, Adapter Plate Bushing, Bearing Puller, Wedge Extractor,
• Compact 3” x 5” x 2-5/8” Timing Plug, Assembly Fixture, “E” Gap Gauge, Cam and Rotor Set,
• Heavy-duty lead wires Spacer, Alternate Cam and Rotor Set, Spacer. Note: This kit does not
include magneto replacement parts.
T100.................................................................................. $885.95

Designed to give you a fast accurate test of Hi-Voltage aircraft igni- SLICK® IGNITION HARNESS ASSEMBLY KIT
tion cables. Simply connect three wires, push the test button and the
test is completed. The E5 will instantly indicate in its test window both
good and defective cables. There is no waiting for any indication
to appear.
E5...................................................................................... $121.95

TIMING INDICATOR

This all aluminum unit is designed

to improve and speed up the
process of timing magnetos to
the engine. It easily attaches to
the propeller spinner, and has an
accuracy of ½ degree. The easy
to read dial can be viewed from The Slick® Assembly Tool Kit is required to install all Slick Ignition Har-
any angle. Comes with top dead ness Leads on all magneto harness caps and spark plug termination
center locator and mounting ends. The complete kit includes: Pressing Tool, 72 Drill Bit, Pin Vise,
bands. Stripping Tool, Spring Assembly Tool, and Shield Stripper. Complete
instructions for the use of this kit can be found in the Unison Industries
E25......................................................................................$76.95 L-1178 Service Manual.
T200.................................................................................. $299.95

800-248-0638 AIRCRAFT TOOL SUPPLY www.aircraft-tool.com 115

 ENGINE EQUIPMENT

When its just got to be right

use a TIMERITE®

Lifetime Warranty

The TimeRite® has been in service

since WWII, and for over 25 years
ATS has been the exclusive manu-
facturer of this extraordinary tool.
This classic was originally designed for
the military to quickly and efficiently time en-
gines in the field. The TimeRite® uses specialized
arms and calibrated scales to accurately locate Top
Dead Center, and allows you to set the timing angle
with dead-on accuracy.

116 800-248-0638 AIRCRAFT TOOL SUPPLY www.aircraft-tool.com

 ENGINE EQUIPMENT
TIME-RITE® ENGINE MAKE ENGINE MODEL
TIME
RITE
SCALE ARM U/D

D2; O-145-B, C B18 9A C Up

O-235; O-290-11; O320, A, C, E; O435-17, 23;
B18 9B E Dn.
O-480-1, A1, A6; IO-320-A

VO-435; GO-435; GO-480-A1, A6, B, B6, D, F, F6;

GO-580; GSO-480-A1A6, B1A6, B1B6; GSO-580; B18 9B E Dn.
IGSO-480-A, A1, A6, B6; TVO-435; TVO-435-B1A

O-340-A; O-290-D2B; O-290-D2C B18 18B V Dn.

GO-480-C, C1B6, C2D, G2D6; GO-480-C1D6;
B18 19 E Dn.
GO-480-C2C6
O-290-D; O-435-A B18 13A V Dn.

R-680 (5:5:1) B18 3A C Dn.

IO-540 B18 9A T Up
The Time-Rite uses specialized arms and calibrated scales to LYCOMING
accurately display piston and angular displacement to 1°. IMO-360-B B18 19 E Up
IO-320-B1A, B, C; O-320-B, D; O-235-C1; O-
The basic Time-Rite unit (I200B18 and I200B14) does not in- 290-D, O2B; O-435-A; O-540-B2B5
B18 9A E Dn.

clude any arms or scales. You must purchase these sepa- GO-480-B1B, B1DB, D1A; GO-435-C2, C2A, C2B,
D1; GSO-590-C; GSO-580-D
B18 9A E Dn.
rately for the specific type of engine you intend to service. O-360-A1D; O-360-C; O-540-D, E, F; IO-540-
B18 29A U Up
D4A5; IO-360-A, B
The complete Time-Rite kits (I200B18K and I200B14K) include IMO-360-A; O-360-A, A1A, A, B; MO-360; IGO-
the basic unit plus the complete set of Arms and Scales. 540; O-540-A, A1A; IGSO-540, A1A; O-340-A1A
B18 18A D Up

IVO-360-A; HO-360-A; HO-360-B; HIO-360-B; IO-

B18 18A D Up
540-C, D, J; HO-360; VO-360; VO-540
PART DESCRIPTION PRICE IO-720; IO-360-A1A B18 18A V Up

I200B18 Basic 18mm Time-Rite Unit $345.95 O-360-B; O-540-B B18 19 R Up

I200B14 Basic 14mm Time-Rite Unit $329.95 O-290-D-2 B18 18A E Dn.
Engine Scale: specify the desired
I209-12 $16.95 4A4; 6A4-150, 165; 6V4-178; O-335-3, 4 B14 7B A Dn.
scale when ordering e.g. I209-5A
6A8-125 B14 7A E Dn.
Engine Arm: specify the desired arm FRANKLIN
6A4-200; 6V4-200; O-335-2, 5, 5A, 5B, 6, 6B;
I205-X $20.95 B14 8B G Dn.
when ordering e.g. I205-D YO-335-5
6A6-245; 6A8; 6V6-245; O-425-1, 5, 9 B14 8A R Dn.
I200B18K Complete 18mm Time-Rite Kit $599.95
I200B14K Complete 14mm Time-Rite Kit $489.95
JACOBS L4; R755A; R755B2 B18 6B C Dn.

I200BCK Combo 14 & 18mm Time-Rite Kit $679.95 R-985; R-1830; R-1535 B18 24A A Up

R-2000; R-2800 B18 24B A Up

PRATT & WHIT-
TIME R-1340-H1; R-2180; R-1690-E B18 23A A Dn.
ENGINE MAKE ENGINE MODEL SCALE ARM U/D NEY
RITE
R-4360 B18 23B A Up
ALLISON V-1710-143, -145 B18 12 H Dn.
A-SERIES B18 5B D Up R-1340C, D B18 23A C Dn.

C-75; C-85; C-115; C-125 B18 5A C Up RANGER 6-440-C B18 3B A Dn.

V-1650, 23, 25 B14 15 J Dn.

C-90; C-145; O-300-A thru D; O-200 A thru F B18 10B C Up
GIPSY QUEEN 30 MK.2 & 70 MK.2 B14 25A C Dn.
E-165; E-185, 1, 3, 8, 9, 11; E-225-4, 8 (with ROLLS-ROYCE
532452 Cylinders); IO-470-J; O470-A, E, J, 11, 15 B18 10A D Up GIPSY MAJOR 140 B14 28A D Up
(with 532452 Cylinders)
GIPSY MAJOR 10 MK.2 B14 25B R Dn.

E-165; E-185, 1, 3, 8, 9, 11; E-225-4, 8; O-470-A, WARNER 125, 145, 165, 185 B18 6A C Dn.
E, J, 11, 15 (with 536727, 538348, 528610 Cyl- B18 13A E Dn.
inders) R-1300-1A, 2A, 3, 4, C7BA (805941) B18 11A K Up

R-3350-75 (80594); 749C18BD1 (805941) B18 11B G Up

FSO-526-A (ATC); GSO-526-A (ATC) B18 20A X
CONTINENTAL R-1820-54, 72 WA, 60, 62, 62A, 74W, 76, 76A,
76B, 76C, 76D, 80, 80A, 82, 82A, 84, 84A, C,
GIO-300; GO-300-A, B, C, E B18 21A U Up B18 2B B Up
D, 86, 86A, 97, 101, 103, 103A, C9GB, C9GC,
C9HD, C9HE (805940)
GSO-526-A (BTC) B18 20B A Dn.
R-2600-8, 13, 20, 29, C14BB; R-3350-8, 13,
23A, 24W, 24WA, 35, 35A, 57M, 57AM, 83; B18 2A B Up
IO-470-C, G; O-470-B, G, H, M, N, P, 2, 13, 4 B18 13B E Dn. WRIGHT 745C18BA-3 (805940)
R-3350-26W, 26WA, 26WB, 30W, 30WA, 30WB,
IO-470-D, E, F, H, K, L, M, N, R; IO520 B18 17 S Up
32W, 34, 77, 85, 89, 91 (805942); 861C18CA-2;
B18 14B M Up
956C18CA; 927TC18DA-1, 2, 3, 4; 975C18CB-1,
O-470-G, H B18 21B T Up
988TC18EA-1, 2, 3
O-470-K, L, R, S B18 17A S Up R-760; R-975 B18 4A C Dn.

R-9A; R-760; R-975-C1, C2, C3 B18 4A C Dn. R-3350TC18 B18 14A MA Dn.

W670 B18 4B C Dn. R-3350-C18BD B18 11A G Up

800-248-0638 AIRCRAFT TOOL SUPPLY www.aircraft-tool.com 117

 ENGINE EQUIPMENT
ATS SPARK PLUG CLEANER AND TESTER
THE #1 SELLING TESTER IN THE AVIATION INDUSTRY

“We have been using this spark plug cleaner ma-

chine for over two years and it has never let us
down. Spark plugs come out looking brand new.
The best part of the unit is that you can test spark
plugs under the same conditions as they are in in
a running engine.”

BEFORE

AFTER
Specifications:
• Operating voltage: 115V or 220V AC Single-phase 50/60Hz
• Recommended air pressure: 100 to 140 psi (7 to 10kg/cm2 )
• Cleaner section abrasive capacity: 1 lb. (900g)
• High-voltage output when spark testing : 24,000V
• Dimensions: 19.3” (49cm) x 11” (28cm) x 10.4” (26cm)
• Weight: 20.5 lbs (9.3kg)
• Accessories included: 12mm, 14mm and 18mm spark plug adapters (2pcs each); 12mm, 14mm and 18mm cleaner gaskets (1 each);
Adapter case (1pcs); Aviation Massive Electrode adapter plug (1pcs), Abrasive 1 lb. (900g)
The latest model of our popular Spark Plug Cleaner and Tester now operates on 120V as well as 220V without the need for con-
verters. It also features advanced protection circuitry to prevent the unit from overheating during prolonged use. It has the same
dependability and ease-of-use that’s made our SPCT100 the 1 selling cleaner-tester in the industry, and carries a full 1-year war-
ranty. It’s still the best choice for anyone who needs to reliably and accurately check the quality of used spark plugs. The cleaner
section uses a powerful blast of air and abrasive to thoroughly remove carbon deposits from plugs. The recessed observation
mirror is perfectly angled to display the electrodes of the spark plug so that you can clearly judge the quality of the spark as the
plug is being tested. It is manufactured to the rigorous ISO 9002 standard. Includes adapters for 12mm, 14mm, and 18mm spark
plugs. Works with Aviation and Automotive plugs. Features a motorized turntable for automatic, “hands-off” cleaning of plugs. Test
plugs at 24,000 volts and up to 150 psi to simulate engine conditions.
Note: The SPCT100A will not remove lead deposits from spark plugs. The proper way to remove lead deposits is by using the
Aircraft Tool Supply Vibrator Cleaner (p/n PA01).

SPCT100A.................................................................................(120/220 Volts)............................................................................... $599.95

118 800-248-0638 AIRCRAFT TOOL SUPPLY www.aircraft-tool.com

 ENGINE EQUIPMENT
DELUXE SPARK PLUG KIT

Our Deluxe Spark Plug Cleaner Kit is perfect for aviation

shops, or for the do-it-yourselfer who wants to do more
hands-on maintenance to save some money. It includes
our ATS415K Bench Gapping Tool with Gap Gauge; the
12 Spark Plug Cleaner; the PA01 Spark Plug Vibrator
Cleaner to remove lead deposits; a Spark Plug Tray; a 10X
Inspection Magnifier; a 4oz Bottle of Anti-Seize Lubricant;
a box of 100 Copper Gaskets; a Thread Chaser; plus our
new ATS950 Magnetic Spark Plug Socket. And rounding
out this winning kit is our best-selling SPCT100A Spark Plug
Cleaner Tester Unit that will check plugs under simulated
high-voltage/high-pressure conditions for spark quality
and leakage.

SPK-DX......................................................................................(120/220 Volts)............................................................................... $729.95

SPARK PLUG FIELD KIT SPARK PLUG CLEANER

TESTER COVER

Custom made canvas cover for the SPCT100

Spark Plug Cleaner Tester unit protects your
investment against damage, dirt, and spills.
Features soft felt inner-lining that guards your
tester against scrapes and scratches.
SPCT100-COVER...............................$32.95

Keep your airplane running smoothly and sputter-free with our new Spark Plug Field Kit. It SPARK PLUG CLEANING ABRASIVE
contains our 12 Spark Plug Cleaner to remove carbon buildup, and a set of Dental Picks to
handle more stubborn lead deposits. After cleaning your plugs, inspect them for pitting and Black Diamond media cleans
cracks with the included 10X Inspection Magnifier. Finally, keep them firing at peak efficiency faster and produces less dust
with our 116 Spark Plug Gapper and ATS450 Gap Gauge. You’ll also receive a Thread Chaser than any other media. It’s com-
to remove buildup from port threads, a 4oz bottle of Anti-Seize Lubricant, 8 copper gaskets, a pletely inert and moisture free to
Champion Spark Plug Tray, and our new ATS950 Magnetic Spark Plug Socket. It all comes in a minimize surface contamination.
durable military-style canvas bag to keep things well organized. 78B..............(Black Diamond).............$3.95
SPK001................................................................................................................$172.95 78W............ (Crushed Walnut)............$2.05

800-248-0638 AIRCRAFT TOOL SUPPLY www.aircraft-tool.com 119

 ENGINE EQUIPMENT
HEAVY DUTY SPARK PLUG GAPPER KIT ATS SPARK PLUG GAPPER

Lifetime Warranty ATS450

Lifetime Warranty

A low-cost efficient gap set-

ting tool for closing gaps
on massive electrode-type
aviation spark plugs. Can be
hand held, bench mounted,
or held in a vise. Complete
with one adapter for 18mm
spark plugs, and one for
REM37BY plugs. Also includes
ATS483 ATS420 the ATS450 retractable gap
ATS482
gauge.

“It’s truly portable, solid and it gaps quickly. If you ever have to do work in
the field this would work great, you can toss it in a tool bag and practically ATS415K............................................................................... $65.95
forget about it because it takes up so little space. If you want to be really
precise, it works great too.” ~ airplanepilotmech
A complete spark plug gapping solution for field or bench use. In- SPARK PLUG THREAD CHASER
cludes our ATS420 Heavy Duty Spark Plug Gapping Tool to accu- Cleans threads in spark plug hole of
rately set your spark plug gaps to within 0.001”. You also get a set dirt, carbon build-up, and metal par-
of wire feeler gauges (p/n ATS450) to verify gap size. If you should ticles. Double ended for both 14mm
happen to accidentally over-gap the plug, then the included Gap and 18mm threads. Neoprene band
Expansion Tool (p/n ATS483) will get you back on track. Lastly, we’ve on hex drive holds tool securely in any
included an Electrode Erosion Gauge (p/n ATS482) to make sure 13/16” deep-well spark plug socket.
that your gapped plugs are still in serviceable condition.
20200....................................................................................$8.95
ATS420DX.........................(Complete Kit)............................. $69.95
ATS420.............................(Gapper Only).............................$39.95
ATS420K........................ (Gapper & Gauge).........................$45.95 SPARK PLUG TERMINAL LEAD THREAD CHASER
ATS483........................... (Expansion Tool)...........................$18.95
ATS482........................... (Erosion Gauge).............................$8.95

ATS SPARK PLUG GAPPER KIT

This economy gapping kit features the Sure-Gap gapping tool, Our new Spark Plug Thread chaser will remove galling and buildup
which works with all 18mm massive electrode aircraft spark plugs from both the spark plugs and the lead coupler threads to ensure
and eliminates guessing of plug gap. The kit also includes our optimum electrical connectivity. Just run the thread chaser over the
ATS450 retractable gap gauge. Wire gauges are made of stainless spark plug threads to clean it, then flip it over and run it into the lead
steel wire and are accurate to .0005”. Gauge sizes are: .015”, .018”, connector to clean that as well. It’s a simple and effective way to
.019”, and .022”. Wires can also be replaced when worn out. restore your threads to like new condition. Available in both 3/4” and
116K.................................(Complete Kit)............................. $22.95 5/8” sizes.
116.............................. (Gapping Tool Only)........................$11.95 ATS485....................................(3/4”)....................................$29.95
ATS450......................... (Wire Gauge Only).........................$21.95 ATS486....................................(5/8”)....................................$29.95
ATS450-WG.................. (Replacement Wire)..........................$8.95 ATS4856K............................(Set of Both)...............................$55.95

120 800-248-0638 AIRCRAFT TOOL SUPPLY www.aircraft-tool.com

 ENGINE EQUIPMENT
ATS MAGNETIC SPARK PLUG SOCKET
ATS SPARK PLUG THREAD LUBRICANT
“I looked for a while for this perfect
product. Get two, one for your tool box
and one for your airplane tool kit.” ~ D
A high-temperature, graphite lubricant
Meyer
that is applied to spark plug threads
prior to installation to prevent galling
and seizure. One 4oz. bottle provides
enough lubricant for up to 200 appli-
cations. Non-hazardous compound.

Lifetime Warranty

Specially designed to accept longer aircraft massive electrode spark ATS2612................................................................................$7.95

plugs. 3-1/2” overall length. 7/8” hex socket with 3/8” drive.
ATS950................................................................................ $35.95 10X ILLUMINATED SPARK PLUG INSPECTOR

SPARK PLUG TRAY

Holds up to 12 spark
Use this 10X illuminated magnifier to check for cracked insulation,
plugs and is marked
pitted electrodes, and deposits that can lead to engine failure.
with the cylinder num-
bers (1-6). DV980-10............................(Donagan)...............................$29.95
52-660-050...................... (Fowler Brand).............................$50.95

STAINLESS STEEL CLEANING PICKS

FAP-12.................................. (12 Hole).................................$35.95

FAP-18.................................. (18 Hole).................................$52.95

A set of four picks that are great for removing lead deposits from
spark plugs. Contains 1 straight, 1 curved, and 2 hooked tips.
SPARK PLUG VIBRATOR CLEANER
E900-205...............................................................................$9.95

SPARK PLUG CLEANER

Cleans any size plug without chang-

ing grommet. Has 2-way valve (blast
or air) and comes ready to use with
abrasive powder.

PA01-21T
This tool will do the same job as the more expensive vibrator clean-
ers at a fraction of the cost. It removes heavy deposits in and 12....................................(Complete Unit)...........................$29.95
around the electrodes with absolutely no risk of damage to the plug. 78B..........................(Black Diamond Abrasive).....................$3.95
PA01.................................................................................... $39.95 78W........................ (Crushed Walnut Abrasive).....................$2.05
PA01-1........................ (Replacement Blade) ........................$3.05 C12B..................... (Replacement Canvas Bag)....................$3.95
PA01-21T.......................... (Tip Assembly).............................$29.95 12GN...................... (Replacement Grommet)......................$3.95

800-248-0638 AIRCRAFT TOOL SUPPLY www.aircraft-tool.com 121

 ENGINE EQUIPMENT
PISTON PIN REMOVAL TOOL

OIL FILTER MEDIA CUTTER

Every mechanic knows the impor-
tance of cutting the media open
to spread the pleats for inspection
of metal in the filter. In the past, this
This tool takes all the
has been a difficult job to com-
work and risk out of re-
plete. Tempest’s new AA471 pro-
moving the piston pin.
vides a low cost, efficient and safe
It works on Lycoming
tool that every mechanic will want to put in their tool box.
and Continental engines. Just slip it over the piston, turn the shaft
AA471................................................................................. $40.95 and it pushes the pin out smoothly and cleanly. Vinyl coated tip
prevents scratching and marring the pin or piston during removal.
OIL FILTER CAN CUTTER PT171..................................................................................$73.95
The tempest universal oil filter can
VALVE SPRING COMPRESSOR
cutter features a compact design
to easily fit in your toolbox while pro-
viding the same cutting power as
the larger units. Comes with a set of
adapters for both male and female
oil filters. The hardened cutting wheel
will cleanly cut through any type of fil-
ter including all Tempest and Cham-
pion Filters.

AA470............................................................................... $115.95

SPARK PLUG TRAY Just attach in one of the valve cover screw holes and give it a cou-
ple quick turns to take the pressure off the rocker shaft. This allows
The Tempest tray design is sturdy you to work with two hands and slip out the rocker shaft. Combine
and balanced, reducing the likeli- this with our piston pin removal tool (PT171) and really save some
hood of tipping, Rubber feet on the time on your next cylinder swap.
bottom of the tray help keep the tray
RST172................................................................................$45.95
in place on metal workbenches and
tool boxes. PUSH ROD SPRING COMPRESSOR

AA446................................................................................. $65.95

SPARK PLUG RESISTANCE TESTER

High internal resistance in
spark plugs is rapidly be-
coming a concern that
many IA/AP’s are beginning
to recognize as the source
of rough running engines
and chronic magneto re- You know how hard it is to get at the springs on the push rod tubes…
lated problems. The AT5K Now, you can compress them and remove the tube in under a
was created to address minute. Just slip this tool onto the spring and crank the shaft counter-
these concerns. It’s a test clockwise (an air ratchet works great for this) to compress the spring,
unit that will accurately measure the resistance of your spark plug and then give everything a wiggle and out it comes. It’s really that
and provide a quick go-no-go test to verify that the resistance is easy! This tool will pay for itself in one top end job. It’s a must-have
below the manufactures recommended level. tool when working on big bore Continentals.
AT5K.................................................................................. $143.95 CST173................................................................................$52.95

122 800-248-0638 AIRCRAFT TOOL SUPPLY www.aircraft-tool.com

 ENGINE EQUIPMENT
CHAMPION™ OIL FILTER CUTTER CHAMPION™ OIL NUT WRENCH

Designed for easy removal of Cessna oil filter adapters from 150
Designed to cut open any spin-on type oil filter quickly and effi- Series thru 300 Series aircraft. Manufactured from tool quality steel,
ciently. It centers around the filter quickly, with no parts to change, features both 3/8” and 1/2” drives, as well as “flip over” reversability.
and cuts in either direction. Cuts all Champion 3.7 Inch diameter This is the wrench to use when complying with Cessna AD 96-12-22.
filters. The CT923 also cuts the new Champion RBC308 filter used on CT709............................................................................... $132.95
the Rotax 912 and 914 engines.
CT923............................................................................... $304.95
CT470-4............... (Replacement Cutter Wheel).................$13.95
CHAMPION™ SPARK PLUG THREAD CLEANING TOOL

CHAMPION™ LEAD-MASTER WRENCH

Lead-Master wrenches reduce time

to remove and install spark plug ig- Designed to clean any 18mm aircraft engine spark plug port to en-
nition leads, also permits short arc sure correct installation of new or overhauled spark plugs.
turning due to 12-point grip head.
CT449............................................................................... $367.95

CT913............................................................................... $293.95
CHAMPION™ OIL FILTER TORQUE WRENCH

CHAMPION™ LEAD
WRENCH

Special “T” handle designed

open box wrench 7/8”. Makes it foolproof to attain the 17 ft/lbs of torque necessary when
installing oil filters. Simply tighten the oil filter until the head “breaks”
to ensure correct torque. Comes pre-calibrated from factory.
CT912............................................................................... $146.95 CT921............................................................................... $121.95

CHAMPION™ SPARK PLUG GASKETS

CHAMPION™ SPARK PLUG LUBRICANT

Use these copper gasket A high-temperature, graphite lubricant that

rings when replacing spark is applied to spark plug threads prior to in-
plugs to ensure a secure stallation to prevent galling and seizure. The
seal. special compound will remain stable even at
very high temperatures. 4 fl oz.

M674K.................................. (Set of 8)...................................$5.95

M674HD............................(Pack of 100)..............................$69.95 2612....................................................................................$12.95

800-248-0638 AIRCRAFT TOOL SUPPLY www.aircraft-tool.com 123

 ENGINE EQUIPMENT
CHAMPION™ SPARK PLUG TRAY TACH DRIVE SEAL REMOVER

A sturdy steel tray that holds up to 12 aviation spark plugs. Speeds

handling of used or new plugs. Holes are numbered to correspond This straight forward tool will let you remove the tach seal in minutes
with engine cylinders. Protects against contamination. time and time again. The seal removal tool is so easy to use, it’s as
CT446.............................. (12 Plug Tray).............................$59.95 easy as counting to five! One: remove the vacuum pump to give
CT446-18......................... (18 Plug Tray)........................... $158.95 the tool plenty of room to work. Two: thread the alignment sleeve
onto the housing as well as the puller. A 3/4” wrench is helpful here.
Three: adjust the alignment sleeve so it can rotate freely. Four: install
the slide hammer and bolt. Five: Firmly impact the bolt head with
CHAMPION™ FINE WIRE GAPPING TOOL the slide to bring the seal out. That’s it! Visit our website for complete
instructional video.
Designed exclusively for adjust- RPM-01.............................................................................. $314.95
ing fine wire electrode spark plug
gaps. Two slot sizes fit all platinum
or iridium ground electrodes for
quick, safe adjustment. OIL FILTER TOOL

CT457................................................................................. $69.95

CHAMPION™ RETRACTABLE GAP GAUGE

Gap gauge with 4 sets of

accurate retractable go
and no-go wire gauges for The Oil Filter Tool was created to assist in removing a stuck filter,
massive electrode avia- without resorting to the traditional hammer, punch, chisel, and or
tion spark plugs. Wire sizes the huge pump plier’s methods. Bogert Aviation wanted the tool to
.015, .019, .018, and .022. be safe in tight quarters and unable to slip, attempting to minimize
damage to nearby components. This is still a messy process but
this tool will always work to remove stuck filters without damaging
CT450.................................................................................$37.95 anything else.
CT450-WG............... (Replacement Wire Pack)....................$21.95
BO-10M-TALON..............(Up to 1500 in lbs)..........................$51.95

CHAMPION™ GAP SETTING TOOL

SWIVEL-GRIPPER “NO-SLIP” OIL FILTER WRENCH
Tough, stainless steel band with
permanently bonded textured
An efficient gap setting tool for closing gaps
coating for superior gripping pow-
on massive electrode-type aviation spark
er...won’t slip. Handle swivels more
plugs. Can be hand held, bench mounted, or
than 180° with adjustable ten-
held in a vise. Complete with one adapter for
sion. Tension adjusting nut allows
18mm spark plugs, and one adapter for REM-
swivel pressure to be regulated...
37BY plugs. Also includes a CT450 retractable
no more floppy filter wrenches.
gap gauge.
Specially designed tab keeps grip
from sliding off the handle.
57010.........................(2.375”-2.625” ROTAX)......................$11.95
CT415AV............................................................................ $262.95 57030................................ (3.5”-3.875”)..............................$11.95

124 800-248-0638 AIRCRAFT TOOL SUPPLY www.aircraft-tool.com

 ENGINE EQUIPMENT
CHAMPION SPIN ON OIL FILTERS
Champion oil filters combine the advantages of both surface and depth-type filtrations: high
filtering efficiency, controlled porosity for uniform flow, water resistance, and the resistance
to impulse and flow fatigue. Champion-brand oil filters keep dirt and harmful particles from
damaging your engine. Plus, no other filters on the market have Champion’s unique, resin-
impregnated, full-pleat design -- 8.2 feet of layered protection for your engine.
CH48103-1...............................................(Type CH48103-1).................................$29.95
CH48104-1...............................................(Type CH48104-1).................................$31.95
CH48108-1...............................................(Type CH48108-1).................................$30.95
CH48109-1...............................................(Type CH48109-1).................................$31.95
CH48110-1...............................................(Type CH48110-1).................................$29.95
CH48111-1...............................................(Type CH48111-1).................................$31.95

AIRPLANE FILTER AIRPLANE FILTER AIRPLANE FILTER

AEROSPATIALE (Socata) CH48110-1 CESSNA (single engine, continued) PIPER
TB9, TB10, TB20, TB21, TB30 188-S/N 03474 & Up, T188-S/N 03474 & Up CH48109-1 Cub
205A , C-206, 206 A thru H CH48110-1 PA-18 “150” CH48110-1
AMERICAN GENERAL CH48110-1 206-S/N 05030 & Up, 206-S/N 05030 & Up CH48109-1 Tri-Pacer
AG5B Tiger U206 , T-206H, TU-206, P206, TP206, 207 CH48110-1 PA-22 “150”, PA-22 “160” CH48110-1
207-S/N 05227 & Up, T207-S/N 05227 & Up CH48109-1 Commanche
BEECH
T207, 210 CH48110-1 PA-24 series CH48110-1
Bonanza
210-S/N 63373-63375 & Up CH48109-1 Pawnee
E33A, F33A, F33B, F33C CH48109-1
T210-S/N 63373-63375 & Up, P210-S/N 278 &Up CH48108-1 PA-25 “150”, PA25 “260” CH48110-1
G-33, H-35, J, K, M-35, N, P-35 CH48110-1
T210, P210-S/N 1-277 CH48110-1 PA-36 Brave CH48109-1
S35 (IO-520B), V35 series, 36, A36 & B36 series CH48109-1
CESSNA (twin engine) PA-36-375 Brave CH48110-1
Debonair/Bonanza
T303 CH48109-1 PA-36-400 Brave CH48104-1
C33A, E33A, F33C CH48109-1
310 C thru Q CH48110-1 Cherokee, Cadet
Musketeer
310 R, T310P, Q, R CH48108-1 PA-28 series CH48110-1
Sport III, 23, A23-19, 19A, B19, B23, C23 CH48110-1
310 (Riley Conversion) CH48103-1 Arrow
A23, A23A CH48109-1
320-A CH48104-1 PA-28R “180” CH48110-1
B23 (O-360A4JD) CH48103-1
320-B, C CH48111-1 PA-28R “180 CH48103-1
Sierra
320-D, E, F CH48108-1 PA-28R “200” CH48110-1
24, A-24, A-24R, B-24R, C-24R CH48110-1
335 CH48109-1 PA-284 “200”, PA-28-R-201T CH48108-1
Skipper
336, 337 CH48110-1 Dakota
77 CH48110-1
P337, P337H, T337H, 340 CH48108-1 PA-28-235 CH48103-1
Baron
340A CH48109-1 PA-28-201T CH48108-1
C55, D55, E55, 58, 58C, 550 CH48109-1
401/402 CH48108-1 Cherokee Six
56TC, A56TC CH48104-1
402C CH48109-1 PA-32 “260”, PA-32 “300” CH48110-1
Baron 58P, 58TC CH48108-1
404 CH48111-1 PA-32R series CH48103-1
Duke
411-S/N 000 thru 0126 CH48104-1 Tomahawk
60, A60, B60 CH48104-1
411-S/N 0127 and up CH48111-1 Trainer PA-38-112 CH48103-1
Queen Air
414, 414A CH48108-1 Malibu
65, 70, 80, 88, B80 CH48111-1
421A, B CH48111-1 PA-46-301P CH48109-1
Travel Air
421C-S/N 1017 thru 1404 CH48109-1 Malibu Mirage
95, B95, B95A, D95A, E95 CH48110-1
PA-46-350-P CH48103-1
Duchess GULFSTREAM AMERICAN Apache
76 CH48103-1 AA-1, 1A, 1B, 1B Trainer, TR, A1C Lynx, T-Cat, CH48110-1 PA-23 “150”, PA-23 “160”, PA-23 “235” CH48110-1
AA-5 Traveler, AA-5A Cheetah, AA-5B Tiger, Aztec
BELLANCA
Cougar PA-23 “250” , “C” PA-23 CH48110-1
17-31 series, 17-31ATC CH48110-1
PA-23 Turbo “250” C thru F, PA-23 Turbo “250” CH48110-1
COMMANDER
CESSNA (single engine) Twin Commanche
112, 112A CH48110-1
150 series, 152 CH48110-1 PA-30 “160” Turbo, PA-39 “160”, PA-39 “160” CH48110-1
112TC, 114 CH48103-1
172 A thru M CH48110-1 Turbo
500B, 500U Ch48110-1
172N CH48103-1 Navajo CH48110-1
700 CH48103-1
172P CH48111-1 PA-31 “300”, PA-31 “310” Turbo CH48103-1
F172 D thru H, FR172 E thru K CH48110-1 HELIO AIRCRAFT PA-31 “325”, PA-31 “350” Chieftain CH48104-
R172K CH48108-1 Helio 700 CH48103-1 PA-31P “425”, PA-31P “350” Mojave
172R, 172RG, 172S, 177 CH48110-1 Seneca CH48110-1
177A, B, 177RG CH48103-1 MAULE PA-34 (IO-360) CH48103-1
180 A thru J, 180Q CH48110-1 M5-180C, MX7-180 CH48110-1 PA-34 (IO-360-CiE6D) CH48108-1
180-S/N 53087 and Up CH48108-1 M5-210C, M5-235C, M6-235, M7-235, MX7-235 CH48103-1 Seneca II, Seneca III, PA-34-220T
182 A Thru S , A182 K thru N CH48110-1 Aerostar CH48110-1
182-S/N 67042 & Up, F182-S/N 00130 & Up CH48108-1 MOONEY AIRCRAFT PA-60 series
R182 , T182, TR182, FTR182 CH48103-1 M20, M20A, B, Mark21, M20D, M20C, M20G, CH48110-1 Seminole CH48103-1
185 A thru D, A185E, F CH48110-1 M20E, M20F, M20M-TLS CH48110-1 PA-44 series
185-S/N 03852 & Up CH48108-1 M20J-201 CH48103-1
188 CH48110-1 M20K-231, M20R, M20K-252 TSE CH48108-1
M22 Mustang CH48110-1

Not a complete list. Visit our website at www.aircraft-tool.com for a complete listing.

800-248-0638 AIRCRAFT TOOL SUPPLY www.aircraft-tool.com 125

 ENGINE EQUIPMENT
CHAMPION MASSIVE ELECTRODE SPARK PLUGS
Champion Spark Plugs are used in more airplanes than any other brand. Note: All spark plugs
are shipped in a factory sealed case - opened cases are non-refundable.
REB37E..................................................................................................................$39.95
REM37BY...............................................................................................................$39.95
REM38E.................................................................................................................$38.95
ENGINE 5/8”-24 3/4”-20
REM40E.................................................................................................................$38.95 MODEL SHIELD SHIELD
RHB32E..................................................................................................................$38.95 TEXTRON-LYCOMING
RHB37E..................................................................................................................$38.95 VO-435-A, B (Long Reach) REB37E RHB37E
TVO-435-A, B, C, D, E, F G (Long Reach) REB32E RHB32E
RHM38E.................................................................................................................$38.95 O-435-23-25

RHM40E.................................................................................................................$38.95 GO-480-B, D, F REM40E RHM40E

REM38E RHM38E

ENGINE 5/8”-24 3/4”-20 ENGINE 5/8”-24 3/4”-20 GO-480-C, G (Short Reach) REM38E RHM38E
MODEL SHIELD SHIELD MODEL SHIELD SHIELD
GO-480-G1, G2 (Long Reach) REB37E RHB37E
RHB32E
ALLISON FRANKLIN ENGINE CO. (continued)
GSO-480-A, B (Short Reach) REM38E RHM38E
V-1710 REB37E RHB37E 6AS-335-A, B; 6AS-350-A, A1; 6V335-A1A, REB37E RHB32E
A1B RHB37E
GSO-480-A, B (Long Reach) REB37E RHB37E
TELEDYNE-CONTINENTAL
6VS-335-A, B REB37E RHB37E
REB32E RHB32E IGSO-480-A (Short Reach) REB38E RHM38E
A-65, A-75, C-75, C-85, C-90, C-115, C-125 REM37BY* RHM40E
REM40E
6A-350-C1,C1A, C2, C2A, D, D1; RHB32E IGSO-480-A (Long Reach) REB37E RHB37E
6V-350-A, -B IGO-480-A; O-480-1-3 REB32E RHB32E
E-165, E-185, E-225 REM40E RHM40E
GYPSY MAJOR (all types) REL37B O-540-A, D, E, F, G, H, J, J3A5; O-540-B; REM40E RHM40E
O-200-A, -B, -C REM37BY* RHM40E IO-540-A, B, E, G, K, L, M, P S, U (Short Reach), REM38E RHM38E
REM40E IO-540-C, D, J, N, T, V; AEIO-540-D, L
JACOBS
IO-240 REM38E RHM38E IO-540-AA, E, G, J, K, M, P R, S, U; REB37E RHB37E
L-4, L-5, & L-6 series R-755 REM40E RHM40E O-540-L3C5D, M1B5D (Long Reach) REB32E RHB32E
GO-300-A, B, C, D, E, F REM37BY* RHM40R
O-300-A, B, C, D, E, C-145 REM40E RHM38E R755S, R-755SM REM38E VO-540-A, B, C (Short Reach) REM38E RHM38E
REM38E
KENROYCE-REARWIN (all types) REM40E RHM40E O-540-9, VO-540-Series REB37E RHB37E
IO-346-A, -B REM40E RHM40E IVO-540 Series (Long Reach)
REM38E RHM38E
TEXTRON-LYCOMING IGO-540-A, -B (Short Reach) REM38E RHM38E
IO-360-A, AB, C, CB, D, E, G, GB, H, HB,J, JB, REM38E RHM38E
K, KB; TSIO-360-A, AB, B, C, CB, D, DB, E, EB, F, O-235-C, E, H REM40E RHM40E
FB, G, GB, H, HB, JG, K, KB, LB, MB; O-235-K, L, M, N, P, REM38E IGO-540-A, -B (Long Reach) REB37E RHB37E
LTSIO-360-E, EB, K, KB O-290 series REM37BY* TIO-540-A, C, E, F G, H, J, K, N, R, S, T,

IO-360-B REM40E RHM40E O-320-A, C, E; O-320-B, D, H REM37BY* RHM40E TIVO-540-A REB32E RHB32E
AIO-320; LIO-320-B; IO-320-B, C, D REM40E
O-470-2 REM38E RHM38E AEIO-320-A, B, C, D REM38E IGSO-540-B (Short Reach) REM38E RHM38E

O-470-4, 11, 13, 13A, 15, REM40E RHM40E IO-320-A, D, E REM37BY* RHM38E IGO-540-A, B REB37E RHB37E
O-470-A, E, J, K, L, R, S REM40E
IGSO-540-A, B (Long Reach) REB32E RHB32E
O-470-B, G, H, M, N, P REM40E RHM40E AEIO-320-E REM37BY* RHM40E
REM38E RHM38E IO-320-C, F; LIO-320-C (Long Reach) REB37E RHM37E
LTIO-540-F, J, N, R REB37E RHB37E
TIO-541-A, E REB32E RHB32E
O-470-T, U RHB32E O-340-A REM40E RHM40E TIGO-541-A, E
REM38E RHM38E
IO-470-C, G, P R, T REM40E RHM40E IO-580-A RHB37E
REM38E RHM38E O-340-B REM40E RHM40E
R-680 REM40E RHM40E
IO-470-J, K REM40E RHM40E O-360-A, C, E, F REM38E RHM40E
IO-360-B, E, F H, L REM37BY* RHM38E
AEIO-360-B, C, H; HO-360-A IO-720-A, B, C, D (Short Reach) REM38E RHM38E
IO-470-D, E, F H, L, M, N, S, U, V, VO, LO; RHB32E
GIO-470-A O-360-B, D REM40E RHM40E IO-720-A, B, C, D (Long Reach) REB37E RHB37E
REM37BY* REB32E RHB32E
LIO-470-A REM40E RHM40E
REM38E RHM38E IO-360-A, C, D, J; LIO-360-E REM38E RHM38E PRATT & WHITNEY
REM37BY*
TSIO-470-B, C, D RHB32E R-985 (Wasp Jr.), R-1340 (Wasp) REM37BY* RHM40E
LO-360-A1G6D; O-360-E1A6D REM40E RHM40E REM40E
IO-520-A, B, BA, BB, C, CB, D, E, F J, K, L, M, RHB32E LO-360-E1A6D REM38E RHM38E
MB, N, NB LO-360-C REM37BY*
R-1830 (Twin Wasp C) REB37E RHB37E
TSIO-520-A, B, BB, BE, C, CE, D, DB, E, EB F, G, RHB32E IO-360-A, IO-360-C1F REB37E RHB37E
H, J, JB, K, KB, L, M, N, NB, P R, T U, UB, V VB, IO-360-F (Long Reach) R-2000 (Twin Wasp D) REB37E RHB37E
WB, AE, AF; LTSIO-520-AE IVO-360
R-2800 (Double Wasp) , R-2800-97, REB37E RHB37E
GTSIO-520-C, D, E, F G, H, K, L, M, N RHB32E AIO-360-A REM38E RHM38E C3, CA5, CA15, CA17, CA18, CA19 REB32E RHB32E
LIO-360-C; AEIO-360-A REM37BY*
TSIO-550-A, B, C; IO-550-A, B, C, D, E, F, G, RHB32E R-4360 (Wasp Major) REB37E RHB37E
L, N, P, R HIO-360-A, D REM38E RHM38E
RANGER (all 18MM Short Reach) REM40E RHM40E
W-670 REM40E RHM40E HO-360-B; HIO-360-A, B REM40E RHM40E
REM38E RHM38E
WARNER (all types) REM40E RHM40E
R9A REB37E RHB37E
TIO-360-A, B; AEIO-360-A (LongReach) REB37E RHB37E
WRIGHT AERONAUTICAL
FRANKLIN ENGINE CO.
HIO-360-E1AD, E1BD, F1AD REB32E RHB32E R-540 REM40E RHM40E
2A4 Series REJ38 LHIO-360-F1AD; IVO-360-A Whirlwind R-760, R-975 (1/2” Rch.)
Cyclone 9N with 1/2” insert (R-1820)
2A-120-A, B RHB32E TO-360-A1A6D, C1A6D, E, F1A6D REB37E RHB37E
LTO-360-A1A6D, E RHB32E Whirlwind R-760, R-975 (18mm 13/16”) REB37E RHB37E
Cyclone R-1300
4A4 Series, 4AC Series REJ38 Cyclone R-1820 Series (Except F & HE)
VO-360-A, B REM40E RHM40E Cyclone R-2600 Series
REM38E RHM38E
4A-235-B, B3, Sport 4, 4A, 4A1, 4B, 4R RHB32E
O-435-A, C REM40E RHM40E Cyclone R-1820-84 (C9HE Series) RHB32E
6AC, 6AL, 6AG, 6A4, 6V4 Series REJ38 O-435-K, K1 REM38E
Cyclone R-3350, C18BA, C18BD REB37E RHB37E
6A4-200, 6V4-200, 6V6-245 REL37B GO-435-C, D Series REM38E RHM38E
VO-435-A; TVO-435-A (Short Reach) Cyclone R-3350-C18CB1 RHB29E
6A8-215 REJ38 Cyclone R-3350-DA1, 2, 3, 4, EA1, 2, 3
Cyclone R-3350-EA4, 5, 6
6A-335-A, B, 6V335-A, -B REL37B

Not a complete list. Visit our website at www.aircraft-tool.com for complete listing * Use REM37BY when encountering lead fouling.

126 800-248-0638 AIRCRAFT TOOL SUPPLY www.aircraft-tool.com

 ENGINE EQUIPMENT
PROPELLER SHAFT OIL SEAL INSTALLER PUSH ROD SPRING COMPRESSOR

For all propeller flange shafts per

Continental Bulletin M-70-2. Also fits
Lycoming. For installing one piece
stretch seals easily and efficiently with-
out damaging the seal or crankshaft.

5209....................................................................................$89.95
For compressing and holding push rod springs on all engines with
spring loaded tubes. Compresses the spring, which can then be re-
moved with the clips furnished. Eliminates wiring springs together. To
PUSH ROD FLARING TOOL install, simply insert spring, then pull off the clip. Instructions included.
68-3.................................................................................. $499.95

VALVE TAPPET CLEARANCE GAUGE

These tools do the same job as the comparable Lycoming or Conti-

Expansion type flaring tool produces a perfect housing flare every nental product which sells for well over $150. The blades are ground
time. Balls rotate inside the push rod housing tube, and snugly ex- and polished to precisely .080” and .028” respectively for Lycoming,
pands it into the boss. and .060 and .200” for Continental.
4915A.................................................................................$99.95 T23S................................... (Lycoming)...............................$65.95

VALVE SPRING COMPRESSOR HARTZELL PROPELLER WRENCH

A simple and effective tool that makes compressing the valve Hartzell prop installation requires a special
spring for keeper removal a snap. Simply hook the “C” hook over wrench to torque the nuts on the prop hub.
the rocker shaft, locate the “L” hook over the spring cover plate, and Hartzell sells a similar wrench for over $200
press the handle downwards to compress the spring. The keeper list price. Made from heat treated 4130 steel
can then be removed and the valve spring separated from the and laser cut to fit 3/4” nuts and 1/2” drive
valve. To re-assemble, just perform the steps in reverse order to re- torque wrench. For use on Hartzell props on
install the keeper. It’s that simple. Lycoming 0360 engines.
3602....................................................................................................................$179.95 AE3528.............................................$71.95

800-248-0638 AIRCRAFT TOOL SUPPLY www.aircraft-tool.com 127

 ENGINE EQUIPMENT
OIL FILTER MEDIA CUTTER HEAVY DUTY OIL FILTER CUTTER

Heavy duty oil filter cutter opens any spin-on type oil filter quickly
and efficiently, including the new Champion dash 1 series with the
heavier base. This is a complete tool with no parts or adapters to
change. It centers around the filter quickly, with no parts to change,
and cuts in either direction. Cuts all Champion 3.7 Inch diameter
filters. Also cuts the new Champion RBC308 filter used on the Rotax
This innovative Oil Filter Media Cutter allows the filter media to be 912 and 914 engines.
cut, removed and analyzed in a very neat and orderly fashion. It’s
design greatly reduces the chance of accidentally injuring yourself. FC-2000............. (For Filters up to 3.7” Diameter)...............$93.95
A pivoting knife with a retractable safety blade is brought into posi- FC-3000........(For Filters from 3.7” to 4.7” Diameter)........$107.95
tion to make a clean, consistent cut of the filter media. And once CT470-4............... (Replacement Cutter Wheel).................$13.95
cut, the media can be removed for inspection and evaluation. Oth-
er benefits are time-saving and a filter sample with no contamina- AIRWOLF OIL FILTER CUTTER
tion compared with other cutting methods. Works with all Champion
filters, and can be adapted for use with Kelly and Tempest Filters.
FMC-2010........................ (Portable Unit)........................... $209.95
FMC-2000................. (Bench Unit with Stand).................... $351.95
FMC-2000K.......... (Kelly Aerospace Adapter Kit)............... $106.95
FMC-2000T................. (Tempest Adapter Kit)..................... $106.95
FMC-2000BL.........(Replacement Cutting Blade).................$13.95

OIL FILTER CAN HOLDER The Airwolf Oil Filter Cutter’s unique design makes it a snap to cut
through any type of oil filter. It’s machined from solid 6061-T6 Aircraft-
Grade Aluminum and fitted with stainless steel rollers for smooth cut-
ting. The high carbon steel cutting blade is hardened to 60 Rockwell
and honed to razor sharpness to produce clean, consistent cuts.
Every mechanic knows that an oil filter cutter is an essential tool; and
if you demand the best, then the Airwolf is for you.
AFC470............................................................................. $112.95
AFC470-RB................. (Replacement Blade).........................$8.95

OIL FILTER CUTTER

Cutting open an oil filter can be a messy process, but this oil filter
can holder makes easy work of it by containing spills that might oc-
cur during the cutting process. It’s made from solid CNC machined
aluminum to hold up to heavy use. And it features three locking
pins to puncture and securely hold the can in place prior to cutting.
The holder also reduces side loads on the cutter blade (from the
FC2000), allowing for a more precise cut with less can deformation. Works on all oil filters. Cuts open oil filter for inspection without intro-
It’s simple to use and easily locks into any machine vise. It’s a great ducing chips.
accessory to the FC2000 Oil Filter Cutter. 1154.................................................................................. $146.95
FH-2000............................................................................. $100.95 1154-1.......................(Replacement Cutter).......................$16.95

128 800-248-0638 AIRCRAFT TOOL SUPPLY www.aircraft-tool.com

 ENGINE EQUIPMENT
TOM’S OIL FILTER CUTTER OILEASY OIL FILTER WRENCH

The “Oil Easy Wrench” is specifically designed to remove the oil filter
on any aircraft using the Continental IO-520, or IO-550 engine. It’s
Tom’s Oil Filter Cutter offers a new approach to the essential task of
the only wrench that can get between the top of the oil filter and the
opening your oil filter for inspection. This product cuts the filter easily
pressure pump and still provide enough leverage to remove the old
in one pass. Includes adapter to work with any type of Champion
(usually stuck) oil filter by hand.
or Tempest aviation filter. May also be used on smaller filters such as
those found on Rotax or automotive engines. OILEASY1............................................................................. $48.95
154701................................................................................$58.95

OIL NUT WRENCH

KLUHSMAN OIL FILTER CUTTER

This wrench is specially

designed to comply with
CESSNA AD 96-12-22

This economical cutter quickly opens any size oil filter canisters for
filter inspection. Simply place the filter in a vise, attach the tool to the The Oil Nut Wrench allows you to reach the adapter nut, which must
top, and rotate about 4 to 6 turns to cleanly cut open the canister. be torqued to a value of 50 to 60 foot pounds in accordance with
It’s made of high quality 6061 aluminum with an attractive purple the CESSNA AD. Its use is required every time the oil filter is removed
anodized finish. The cutting wheel stays sharp for up to 45 applica- to prevent the possible loss of engine oil caused by loose or sep-
tions, and is easily replaced when it becomes dull. arated adapters. This tool is absolutely essential for anyone work-
FC01................................................................................... $65.95 ing on any of the following aircraft: All Cessna Models 100, 200,
FCW.................... (Replacement Cutting Wheel)..................$8.95 300, and 400 series; Meyers 200; Twin Commander 500A and 685;
Beech 33, 35, 36 and 55 series; Piper PA 46; Navion Rangemaster
17 series; Wren Model 460; Bellanca 200 and 300 series.
AVERY TOOLS OIL FILTER CUTTER
TG961222...........................................................................$79.95

OIL FILTER TORQUE WRENCH

A Professional Quality, Heavy Duty wrench with a built in ratcheting

mechanism and a pre-set torque arm. The tool fits all standard gen-
This tool allows you to easily cut open your oil filter to inspect the pa- eral aviation aircraft oil filters and has a solid lever-arm with a knurled
per filter element for contaminates and to detect problems inside grip to make oil filter removal a snap! The wrench is compact for
your engine before they become major and expensive issues. This areas of limited access and easily fits filters in tightly cowled aircraft.
oil filter cutter will work with both styles of aircraft oil filters -- those that Once the new filter is ready for installation, reverse the wrench and
have female threads and those that have male threads. This tool will ratchet the filter securely back into place. When the pre-set torque
cut filters from 3” diameter up to 4-3/4” diameter. limit of 17 ft/lbs is reached, the user will feel a slight “break” or “click”
AE81031...................................... ........................................$94.95 in the handle. No other torque tools are required.
AE12027..................... (Replacement Blade).........................$9.95 AA472................................................................................. $59.95

800-248-0638 AIRCRAFT TOOL SUPPLY www.aircraft-tool.com 129

 ENGINE EQUIPMENT
AVIATION PISTON RING COMPRESSOR WRINKLE BAND PISTON RING
COMPRESSOR

An economical al-
ternative to standard
pliers and bands, this
tool will do a great
job of installing piston
rings of any diameter
up to and including
5”.

• Wrinkle band cuts friction in half. Ring slides

in easily.
• Wrinkle Band can’t slip down into cylinder.
• Set adjustment screw just once for the en-
tire set of pistons.
• Faster! Insert a full set of piston rings in half
the time with half the work!
• Installs rings from 3” (76.2mm) to 5”
(127mm).
Our Aviation Piston Ring Compressor features a quick-change design to speed up piston ring
installation. It includes the famous Hastings Ring-O-Matic® pliers and bands that operate in 21700...............................................$13.95
all positions: not just vertically or horizontally.
PISTON RING INSTALLER
PART DESCRIPTION PRICE
AND EXPANDER
1670A Ring-O-Matic Pliers $39.95
1670F Band 3-7/8” to 4-1/8” $21.95
1670G Band 4-1/8” to 4-3/8” $21.95
1670H Band 4-1/2” to 4-3/4” $24.95
1670I Band 4-3/4” to 5” $24.95
1670J Band 5” to 5-1/4” $24.95
1670K Band 5-1/4” to 5-1/2” $24.95
1670L Band 5-1/2” to 5-3/4” $31.95
This important tool is inexpensive and easy
7500 Complete kit with pliers and bands for sizes 4-1/8” to 5-3/4” $179.95
to use. Just insert the ring ends in wedge
jaws and expand the ring gently and slip
into groove. Also ideal for removing rings
SMALL BORE PISTON RING COMPRESSOR KIT easily without damage. Handles piston rings
from 3/64” to 1/4” wide.
1723.................................................$12.95

PISTON RING GROOVE CLEANER

Cleans carbon from
piston ring grooves.
Easily adjustable.
Blades included for
five most popular
piston groove sizes:
5/64”, 3/32”, 1/8”,
5/32”, 3/16”. Adjust-
able ratchet action
This kit is designed to accommodate engines with smaller cylinder bores. It features the holds piston in posi-
same Hastings Ring-O-Matic® pliers as the Aviation Kit, so you can easily purchase additional tion during cleaning.
bands as needed. The kit includes pliers and 6 bands in the following sizes: 2-7/8 to 3-1/8”, Revolve tool around piston to clean. Spring
3-1/8” to 3-3/8”, 3-3/8” to 3-5/8”, 3-5/8” to 3-7/8”, 3-7/8” to 4-1/8”, and 4-1/8” to 4-3/8”. release for quick removal of piston.
1670......................................................................................................................$99.95 2477.................................................$24.95

130 800-248-0638 AIRCRAFT TOOL SUPPLY www.aircraft-tool.com

 ENGINE EQUIPMENT
VACUUM AND FUEL PUMP TESTER RAPCO VACUUM PUMP WRENCH

Easy reading gauge assures ac-

curate vacuum and pressure
check. Has both English and
Metric scales and measures
This wrench is used to remove and replace
vacuum from 0 to 30. The pres-
vacuum pump flange nuts. The shank is bent
sure gauge reads from 0 to 15
to access to those tight areas between the
psi in increments of 1 psi.
pump and the accessories nearby. The open
end head is laser cut to provide a close toler-
20300..................................................................................$28.95 ance fit on the nut.
RA716.................................................................................$34.95

LOCTITE® AVIATION GASKET SEALANT

GASKET PUNCH SET
A reliable liquid gasket sealant, dress-
ing and coating compound. It brush-
es on very thinly and forms seals that
resists temperatures of -65º to 400ºF Punches holes in gasket material,
(-54ºC to 204ºC). It’s resistant to gas- leather, vinyl or soft material. Set
oline, oils, and other solvents and is in- of ten punches 1/4”, 5/16”, 3/8”,
ert so that it will not interact with other 7/16”, ½”, 9/16”, 5/8”, 3/4”, 7/8”,
chemicals. It dries to full strength in and 1” with driving mandrel and
just under 12 hours. 1 pint container. molded plastic case.

3051.................................................................................... $16.95
S1270..................................................................................$35.95

UNIVERSAL BEARING PACKER

SEAL DRIVER KIT
Fast, efficient, thorough. Simply place the
bearing between the plastic cones, tight- Quickly drives seals without
en, and apply grease through the fitting on damage to the surrounding
the end of the threaded shaft. Forces out fixture. Comes complete with
old grease and evenly injects fresh grease 16 adapters for seals up to
into the bearing. Cone diameter is 5”. 3-3/8” diameter. Includes a
special adapter for “shielded”
seals.
65250.................................................................................. $10.95
24800..................................................................................$40.95

HANDY PACKER® BEARING PACKER

SEAL PULLER

The Handy Packer works on bearings up to 3 1/2” O.D. The grease Two hook sizes easily remove most oil and grease seals. Where
stays in the tool cavity, not on your hands. To pack a bearing, place clearance is a problem, remove the pin to reposition the head. The
the bearing on the piston. Press down on the cap until the old grease adjustable head works great in tight areas.
is forced out and the new grease shows on top of the bearing. 56650.................................(Adjustable)..............................$15.95
34550..................................................................................$23.95 56750..................................... (Fixed).....................................$8.95

800-248-0638 AIRCRAFT TOOL SUPPLY www.aircraft-tool.com 131

 ENGINE EQUIPMENT
VALVE LAPPING COMPOUND CYLINDER FLEX-HONE

Clover lapping compound is the

choice of leading mechanics when-
ever they need to size valve stems and
seats to exact tolerances, while pro-
ducing an exceptionally smooth finish.
Grease type mix retains its texture and
lubrication properties during extended
lapping or grinding and leaves a rust
preventing film. 1lb. can.
A51803...............................................................................$38.95 For cylinder bore reconditioning. 120 grit silicon carbide provides
proper finish for cylinder wall breaking without expensive fixtures.
PART SIZE PRICE
VALVE LAPPERS
102 3-1/2” to 4” $83.95
202 3-3/4” to 4-1/4” $89.95
305 4” to 4-1/2” $85.95
405 4-1/2” to 5” $93.95
Excellent tool for restoring a valve’s surface finish. Hand operated 505 5” to 5-1/2” $99.95
action allows you to remove metal in precise amounts. Each lap- 605 5-1/2” to 6” $109.95
ping tool comes with cups for two different valve sizes. Get both
tools and you will be able to handle just about any type of engine.
21100.......................(Sizes: 1-1/8” and 1-3/8”)......................$9.95
21200........................(Sizes: 5/8” and 13/16”)........................$8.95 VALVE GUIDE FLEX-HONES

MITYVAC VACUUM TESTER KIT

Flex-Hone allows you to precision fit valve stems to proper guide tol-
erances. Flex-Hone is self aligning to the guide bore and self com-
This is the original Mityvac pensating for hone wear. Provides a plateau finish, which creates
hand vacuum pump kit proper lubrication to prevent sticking and permits a closer stem to
used by service profession- guide clearance. Hones are 240 S/C grit.
als worldwide for perform-
ing hundreds of automotive PART SIZE PRICE PART SIZE PRICE
diagnostic and mechani-
GB9 .354” $15.95 GB12 .472” $15.95
cal tests and for one-person
GB95 .375” $15.95 GB125 .500” $15.95
brake bleeding. The MV8000
GB10 .395” $17.95 GB58 .625” $17.95
kit contains our most popular
GB11 .433” $17.95 GB34 .750” $17.95
Selectline vacuum.

8000............................ (Selectline tester kit)........................$49.95

FORM-A-FUNNEL
4000.............. (Silverline Premium all-metal tester kit)..........$89.95
Shape, drain, pour, store.
Its that easy with the Form-
HEAT RESISTANT ARM GLOVES A-Funnel Flexible Draining
Tool. It guides oil around skid
plates and cross members
right into your oil drain for
easy, no-mess oil chang-
es! This tool quickly bends,
molds and holds any shape,
so you can customize the
The heat resistant Kevlar® material protects hands and arms from
perfect channel to drain liq-
hot surfaces. This enables work on hot engines and exhaust systems
uids without making a mess.
without waiting. Works on both right and left hands. The glove por-
tion is coated with a vinyl tread for greater gripping power. Extends
to 24”. Washable.
21260.................................(Arm Glove)...............................$20.95 18609.................... (14.5”L x 6.5”W Automotive)..................$20.95
18700.................................(Hot Sleeve)............................... $14.95 18611..........................(29”L x 5”W Aviation)........................$29.95

132 800-248-0638 AIRCRAFT TOOL SUPPLY www.aircraft-tool.com

 ENGINE EQUIPMENT

ATS AIRCRAFT ENGINE STAND KIT (WITH LOCKING CASTERS)

• Bolts together in min-

utes using just a 1/2”
wrench.
• No Welding necessary.
• Supports over 1,200 lbs.
Lifetime Warranty
• Ships as a regular sized
package, not over-
sized or dim weight.

“This is a great product, is well made, easy to

put together, and is very sturdy. It was obvi-
ously designed by mechanics as the hardware
is correct in length etc...” ~ T. LeBaron 65530-20SA

Our new breakdown Engine Stand Kit comes to you unassembled to save you BIG on shipping costs, but goes together in just a few
minutes with only a couple of wrenches. Other engine stands are pre-welded and shipping via UPS or FEDEX can be very expensive
because of their size and shape. In fact, it’s not unusual for us to see shipping costs as high as $375 to places in Alaska! Some of
our competitors try to get around this by selling their engine stands in kit form, which solves the shipping problem. But you still have
to weld it together yourself! So if you don’t have welding equipment, or your welding skills are rusty, then you’re out of luck. Our new
engine stand requires ABSOLUTELY NO WELDING. We ship it in a compact box to minimize shipping costs, and provide everything you
need to get going. All you need to supply are a couple of 1/2” wrenches and a little elbow grease.
65530CX..................................................................................(Complete Kit)...................................................................$269.95
65530-20SA................................................................. (Optional #20 Spline Adapter).......................................................$175.95

EXHAUST STUD REPLACER KIT TOPCAP ENGINE PROTECTOR

The Topcap engine protector is made to fit

over the cylinder studs and shield the inside
of your engine while maintenance is being
performed. Topcap engine protectors are
used by leading mechanics everywhere.
A precision tool that will allow you to remove broken studs, retap, and replace them accu- • Fits most engines including Lycoming
rately to the original dimensions. This can be accomplished in most cases without removing Wide Deck 320, 360, 540, 720, and Con-
the cylinder; even the Number One cylinder in a Bonanza. Works on all Continental 470, 540, tinental 470, 520, and 550 series engines.
550, and 520 series engines. The kit includes the following: One steel, jig bored, locating • Allows for full crankshaft rotation.
plate; Three knurled retaining nuts to secure the locating plate; Four hardened and ground • Made of fuel and solvent resistant poly-
drill bushings; Three drill extensions - 6”, 9”, and 12”; One 3/8” drill chuck mer.
HE01....................................................................................................................$358.95 TC320..................(1 Pair)...................$29.95

800-248-0638 AIRCRAFT TOOL SUPPLY www.aircraft-tool.com 133

 ENGINE EQUIPMENT
CONTINENTAL 550 CYLINDER
BASE WRENCH CONTINENTAL/LYCOMING CYLINDER BASE WRENCHES

This 9/16” wrench is designed for easy ac-

cess to nuts on the 550 series engines. Stan-
dard ½” square drive. 13” overall length. This
wrench is also used on the 7th order stud of
the GTSIO520BA.
8158A............................................$499.95

CONTINENTAL 470/520
MOUNT AREA WRENCHES

5204 • Fits all Continental, most Lycoming, and many

other types of aircraft engines.
• 15” (381mm) span fits around almost all aircraft
cylinders.
• 0.14”(3.5mm ) thin wall fits into tight areas.
5203
• 12-point end fits both hex 12-point nuts.
• 1/2” square drive.
Low Profile to clear fins
The new ATS 3882-series Cylinder Base Nut Wrenches are made from forged alloy steel,
The special configuration of these wrenches
tempered, and hardened for maximum strength. They also have an industrial chrome
permits access to the 470 and 520 engine
plating to improve surface wear, and protect against rust and corrosion.
mount areas. The 5203A wrench is specially
designed for the 520 D&H engine’s 3 and 6 PART SIZE PRICE
cylinders.
3882-9/16 9/16” $34.95
PART DESCRIPTION SIZE PRICE 3882-1/2 1/2” $34.95
5203 Left mount area 5/8” $749.95 3882-5/8 5/8” $34.95
5204 Right mount area 5/8” $713.95 3882-3/4 3/4” $34.95
5203A 520D&H 3 & 4 cyl. 9/16” $720.95
3882-5 Set of all 4 sizes $135.95

ENGINE MOUNT INSTALLATION

ALIGNMENT PINS LYCOMING NARROW DECK CYLINDER BASE WRENCHES

Superior quality wrench is specifically used with internal hex

Alignment pins for use in installation of en- nuts on Lycoming engines. Drive end is 1/2”.
gine mounts on aircraft engines. Pins go in
PART SIZE PRICE
the holes ahead of bolts to help align every-
thing without damaging the bolts. Pins are 6494-2 1/2” $39.95
7/16” diameter steel, and machined with a 6494-3 3/8” $39.95
taper to a bullet nose on the smaller end. 6494-SET Set of both sizes $69.95
AE282...............................................$18.95

134 800-248-0638 AIRCRAFT TOOL SUPPLY www.aircraft-tool.com

 SERVICE & SUPPORT
ATS 10X AIRCRAFT STRUT PUMP

• Made from 6061-T6 Aluminum for

lightweight durability
• Operates on 50 to 150 psi air pres-
sure (100 psi recommended)
• Enhanced high pressure valve system
rated at over 3,000 psi
• True 10X boost produces over 1,500
psi from 150 psi source
“I highly recommend this company. This • Also works with Nitrogen delivery
pump is well made, very good quality and a systems
useful tool. Each pump lifts my nose strut on
my Baron about 1/4”, so it is very control- • Safety “one-shot” system delivers
lable.” ~ R. Gawer pressure in controlled bursts
• 24” High Pressure Delivery Hose

Delivers up to 1,500 PSI of pressure to raise struts without the need for jacks. Safety one-shot air delivery system gives you maximum control
over the entire process -- each stroke of the delivery valve injects a small shot of pressurized air into the strut so that you can raise it in con-
trolled increments. Virtually zero chance of accidentally over-pressurizing and possibly damaging your struts.
675A.............................................................................................................................................................................................. $329.95

DUAL RANGE TIRE PRESSURE GAUGE

STRUT SERVICING EQUIPMENT

Accurately measures tire pressure up to 300

psi in 5 psi increments. Dual calibrations;
psi in black and kg/cm2 in red. Accurate to
within 5%.
980400.............................................$45.95
SCHRADER STRUT COUPLER

556 SK2043C
Our kit contains all of the hardware you’ll need to deliver nitrogen to tires and struts from The Schrader Tee-coupler attaches directly
a nitrogen bottle. It includes a regulator, gauges (input and delivery), shut off valve, 12’ to the strut valve to inflate or deflate the strut
hose, and a strut coupler. There are two types to choose from: Low pressure for nose via the built-in core depressor pin.
struts and high pressure for main struts. Bottle (input) pressure gauge ranges 0-4000 psi.
The Schrader “gooseneck” coupler is used to
Delivery pressure gauge ranges 0-500 psi for the low pressure model, and 0-2500 psi for
connect to the inflation valves of most types
the high pressure model. Does not include nitrogen bottle.
of aircraft struts.
606...............................................(0-500 psi Delivery Pressure)...................... $394.95
556................. Tee-Coupler..............$29.95
607..............................................(0-2500 psi Delivery Pressure)..................... $799.95
SK2043C.. Gooseneck Coupler........$14.95

800-248-0638 AIRCRAFT TOOL SUPPLY www.aircraft-tool.com 135

 SERVICE & SUPPORT
PRESSURIZED STRUT FILLER 15X STRUT PUMP

Scan to view
video

The 15X Strut Pump was

designed for high pres-
sure output. It is a pres-
sure multiplier pump that
is used to pressurize
aircraft landing gear
• One tank contains clean Strut fluid and struts, and other high
the other collects the excess pressure applications. The 15X
• Built in pump forces fluid into the strut to strut pump is able to boost air or
top it off and the excess is drained off nitrogen to 2250psi or 15 times the
controlled right from the unit inlet pressure. Simply hook up the out-
• Large capacity 5 qt storage tanks are big put hose to the strut and the inlet to a pres-
enough for just about any strut sure source such as shop air or regulated
• Can be used on struts requiring up to 3000 nitrogen. Cycling the slide valve forces a sin-
psi strut pressure gle precise shot of high pressure air into the
strut. Operator raises pressure in increments,
Finally a real time and money saver! This tool changes the way landing gear struts are ser- maximizing control and minimizing chance
viced. No longer do you have to put an aircraft up on jacks to add fluid to and fill Oleo type or over-pressure. More than enough pump
landing gear. This is a totally clean and safe process. No oil is spilled. The strut valve is not for most aircraft.
disturbed and the plane is sitting on the ground the whole time. This is safe for the technician BO-19M-15X...................................$639.95
and the aircraft.
BO-16M-PSF.........................................................................................................$899.95 HX STRUT PUMP

Similar in size and

weight to a stan-
DELUXE STRUT SERVICE TOOL dard bicycle pump,
Bogert’s Aviation’s
HX Strut Pump is
designed for high
pressure output. It
The Deluxe Strut Service Tool is easier to use
is a portable hand
than the standard Strut Service Tool. Typical-
pump that pressur-
ly, the aircraft is placed on jacks. The SUPPLY
izes landing gear
TANK of the SST2 is partially filled with fluid. As
struts. The HX strut
the SST2 is attached to the strut, the pressure
pump boost air or
in the strut and any foam is released into the
nitrogen to 1000psi.
RETURN TANK.. The strut is compressed and
Simply hook up the
extended several times until the discharge is
output hose to the
all fluid. With the strut compressed, remove
strut and the inlet
the SST2 and service with high pressure air or
hose to an air com-
nitrogen.
pressor, spare tire,
portable air tank or
12 volt tire inflator. For real back country use
it even works with a bicycle tire pump. Very
portable. No air compressor needed!
BO-16M-SST2..................................$215.95 BO-19M-HX.....................................$489.95

136 800-248-0638 AIRCRAFT TOOL SUPPLY www.aircraft-tool.com

 SERVICE & SUPPORT
BRAKE RELINING TOOLS
DELUXE BRAKE BLEEDER TANK

Our Deluxe Brake Bleeder Tank has

been completely redesigned to resist
Lifetime Warranty
the solvent effects of most types of
aviation brake fluids. The high-impact
plastic reservoir and specialized seals
are compatible with 5606 and Skydrol.
The hand operated pressurizing pump
has also been totally re-engineered
to deliver more pressure with fewer
strokes. You will get everything needed
to fit most brake receptacles. W403

W404

Our W404 brake relining tool makes it virtu-

ally impossible to botch a brake relining job.
“I spend hours trying to get the air out of my Piper Arrow brake system. After complete frustration, The threaded screw action of the rivet inser-
I decided to buy this pressure bleeder that fills the 5606 from the brake master cylinder( at the tires)
tion tool insures a perfect roll on brake rivets
and have the air bubbles rise to the brake fluid reservoir. My system was rock solid after only 20
minutes or so.” ~ Pete VA. every time without damaging the liner. Ma-
chined steel, not cast.
225DX..................................................(W/Both Adapters)...............................$99.95
225DX-15H......................................... (15’ Extension Hose)..............................$69.95 W404..........(Threaded Model)..........$29.95
A255...................................................(Universal Adapter)................................$8.95 W403............(Impact Model)............$25.95
1246.................................................. (Cleveland Adapter).............................$29.95 4-4..........(Brake Relining Rivets).........$6.95

AERO JACK SYSTEM AVIATION JACK

BO-30M-AJC

Be more productive with the Bogert Aviation

Tribal Jack. It’s easily 10X faster than wing
jacks. Originally designed for the Piper Tribe
BO-30M-AJE of aircraft, Bogert’s Tribal Jack has proven it-
Forget bulky expensive wing jacks for simple projects! Reach for Bogert’s Complete Aero self to be a great multipurpose shop tool for
Jack System. This kit includes Bogert Aviation’s jack, extenders, and aero jack pads to save many aircraft models having oleo strut land-
you time when servicing brakes, bearings or tire changes. The jack raises each wheel inde- ing gear. The Tribal Jack is very useful for an-
pendently in seconds, makes servicing flat and round gear easy from one handy toolbox. nual inspections as well as changing a tire or
Designed by an A&P, for do-it-yourselfers and professional aviation mechanics. packing wheel bearings. Fixing a flat is easy
with the ‘new’ lower clearance lifting pad. It
BO-30M-AJR............................................... Round Tubular..................................$283.95
can be used on main gear, nose gear and
BO-30M-AJF................................................... Flat Gear......................................$310.95
the tail wheel.
BO-30M-AJC.................................................. Aero Jack.....................................$409.95
BO-30M-AJE............................................. Expandable Jack............................$1,280.95 BO-30M-TJ......................................$300.95

800-248-0638 AIRCRAFT TOOL SUPPLY www.aircraft-tool.com 137

 SERVICE & SUPPORT
MEYER HYDRAULICS® TRITASK AIRCRAFT JACKS
A700 SERIES
AIRCRAFT JACKS This series is for heavier piston, jet
powered, and turbo-prop aircraft
weighing up to 32000 lbs. Features a
A500 SERIES
3.5” diameter slide tube with positive
Ultra-low design is ideal for low-slung locks at 1.5” invervals. The top has a
airplanes and helicopters weighing 1” (25mm) diameter threaded hole
up to 8000 lbs. Features a 2.5” di- to receive a AT-JPRn Jacking Point
ameter slide tube and positive locks Receiver, a Top-of-the-Jack Load
at 1” intervals. A 1.25” Jacking Point Cell, or AT-EBnnn Extension Bars.
socket is built-in. NOTE: The optional
AT500-CA conversion adapter allows
this series to use AT-EBnnn Extension PART RANGE CAPACITY (LBS) PRICE
Bars for additional height. A722B 22.5” to 36.5” 16000 $1,810.95
A725B 25.5” to 42.5” 16000 $1,829.95
A728B 28.5” to 48.5” 16000 $1,849.95
PART RANGE CAPACITY (LBS) PRICE A728C 28.5” to 48.5” 24000 $2,025.95
A514 14” to 24” 6000 $995.95 A734B 34.5” to 60.5” 16000 $1,850.95
A519 19” to 34” 6000 $1,029.95 A734C 34.5” to 60.5” 24000 $2,045.95
A521 21” to 38” 6000 $1,049.95 A740C 40.5” to 71.5” 24000 $2,035.95
A755C 55.5” to 95.5” 24000 $2,559.95
OPTIONAL ITEMS A760A 60.5” to 100.5” 10000 $2,239.95
AT500-CA Conversion Adapter $54.95
AT400-204 Tube Extension 8” (A519 & A521) $45.95
TRITASK JACK SETS
A600 SERIES
This series is the standard Meyer
Jacks for airplanes and helicopters
weighing up to 8000 lbs. They have a
2.375” diameter slide tube with posi-
tive locks at 1” intervals. A 1” (25mm)
diameter threaded hole at the top
will receive a AT-JPRn Jacking Point
Receiver, a Top-of-the-Jack Load
Cell, or AT-EBnnn Extension Bars.

PART RANGE CAPACITY (LBS) PRICE

A622 22.5” to 37.5” 6000 $930.95
A627 27.5” to 47.5” 6000 $996.95
A634 34.5” to 59.5” 6000 $1,055.95
OPTIONAL ITEMS
AT-EC01 Slide Tube, 28”-47” (A627) $155.95
TriTask Aircraft Jack Sets are designed to economically cover a
AT62222 Slide Tube, 22.312”-37.312” (A622) $96.95
AT62234 Slide Tube, 34.312”-49.312” (A622) $97.95 wide range of airplanes and helicopters weighing up to 8000 lbs.
AT62727 Slide Tube, 27.312”-47.312” (A627) $98.95 The Basic Set (pictured) contains: (2) A622 Jacks w/AT62222, (2)
AT63434 Slide Tube, 34.312”-59.312” (A634) $111.95 A634 Jacks w/AT63434, (4) AT-JPR1 Receivers, (1) AJL-ZB Extension
AT63448 Slide Tube, 48.312”-73.312” (A634) $126.95 Leg Set, (1) AT-EBZA Extension Bar Set, (2) AT62234 Slide Tubes, (2)
AJL-ZA Extension Leg Set (4) (A634) $115.95
AT63448 Slide Tubes, (1) ATS Tailstand
AJL-ZB Extension Leg Set (8) (A634) $219.95
The Deluxe Set includes the Basic Set plus: (1) A622 Jack w/
ACCESSORIES AT62222, (1) AT-JPR1 Receiver, (1) ALW-10 Leveling Washer Set, (1)
PART DESCRIPTION PRICE AT-EBZB Extension Bar Set, (1) AT62234 Slide Tube.

AT-JPR1 Jack Point Receiver #1, .187” x .875” $10.95

The Premium Set includes the Basic Set plus: (2) A627 Jacks w/
AT-JPR2 Jack Point Receiver #2, .375” x 1.25” $15.95 AT62727, (2) AT-JPR1 Receivers, (1) ALW-10 Leveling Washer Set, (1)
ALW-10 A500 & 600 Series Washer Set $35.95 AT-EBZB Extension Bar Set, (1) ATS-AA72 Slide Tube
AT-EBZA Extension Bar Set $431.95 A600JS-A........................... (Basic Set).......................... $5,195.95
AT-EBZB Extension Bar Set $439.95
ATS Adjustable Tailstand 30” to 51.5” $244.95 A600JS-B.......................... (Deluxe Set)........................ $6,625.95
ATS-AA72 Tailstand Slide Tube, 51” to 72” $94.95 A600JS-C....................... (Premium Set)....................... $7,695.95

138 800-248-0638 AIRCRAFT TOOL SUPPLY www.aircraft-tool.com

 SERVICE & SUPPORT
TRITASK JACK SELECTION GUIDE
AIRCRAFT JACKS REQUIRED ACCESSORY
Use the selection guide below to choose the correct TriTask
Dassault: Falcon 10 (3) A728B (1) AT-EBZA
jacks and accessories for your aircraft. If it’s not listed, then
measure the low and high jacking points of your aircraft and
Dassault: Falcon 20 (3) A734C (1) AT-EBZB
select the jacks that come closest to meeting your needs.
Note: This table is only a partial listing for some of the more Dassault: Falcon 50 (2) A740C & (1) AT-EBZB
(1) A734C
popular airplanes Meyer Jacks support.
(2) A519 &
Please visit us at www.aircraft-tool.com for a complete list. Eclipse: 500 (VLJ) (1) A627 (1) AT-EC01

Fairchild Swearingen: Merlin II, (3) A740C (1) AT-EBZA

AIRCRAFT JACKS REQUIRED ACCESSORY III, IV

Aero Comander 100 (2) A634 (2) AT63448, (2) AT-EBZA, Gulfstream: Aero Commander (2) A634 (2) AT63448, (2) AT-EBZA,
(1) AJL-ZB, (1) ATS (1) AJL-ZB
Beechcraft: 1900, 99, King Air (3) A734B Gulfstream: G100 (3) A734B (1) AT-EBZB
(all series)
Beechcraft: 95, Baron, Debo- (2) A622 (2) AT-EB035, (1) ATS Gulfstream: G150 (2) A734B & (1) AT-EBZB
nair, Bonanza (1) A728B
Beechcraft: Bonanza Twin 50, (2) A634 & (1) AT62234 Gulfstream: G200 Galaxy (2) A734C & (1) AT-EBZA
Queen Air (1) A622 (1) A728C
Beechcraft: Hawker 400, 400A (2) A728B & (1) AT-EBZA Gulfstream: Tubo Commander (2) A760A
Diamond, 700 (1) A725B
Beechcraft: Hawker 800's, 900's, (2) A728C & (1) AT-EBZB Jet Commander Westwind (2) A734B (1) AT-EBZB
1000 (1) A740C
Beechcraft: Hawker 4000 (3) A734C Learjet: All 20's, 30's, 55 (2) A725B & (1) AT-EBZB
Horizon (1) A722B

Beechcraft: Premier (3) A728B (1) AT-EBZA Learjet: 45 (2) A728B & (1) AT-EBZA
(1) A725B

Britten Norman: Islander/Tris- (2) A634 & (1) AJL-ZB, (1) AT-EBZA, (2) A728B &
(2) AT63448, (1) ATS, (1) Learjet: 60, 70/75 (1) A722B (1) AT-EBZA
lander (1) A627 ATS-AA72
Bombardier: Challenger 300 (2) A734C & Lockheed: JetStar, JetStar II (3) A734C (1) AT-EBZB
Series (1) A728B (1) AT-EBZA

Mitsubishi: MU-2's (2) A760A & (1) AT-EBZA

Bombardier: Challenger 600 (2) A734C & (1) AT-EBZA (1) A722B
Series (1) A728C
(2) A740C & Mooney (2) A622 (1) ATS
Bombardier: CL-215, CL-415 (1) A728C (1) AT-EBZA

Cessna: All High Wings except (2) AT63448, (1) AJL-ZB, Navion (2) A622 (2) AT-EB055, (1) ATS
Caravan's (2) A634 (1) AT-EBZA, (1) ATS
Cessna: Caravans 208, 208B, (2) A728B & North American Sabreliner (3) A728B (1) AT-EBZA
406 (1) A622 (1) AT-EBZA
(1) AT-EBZA, (1) ATS
Cessna: 310, 320, 337 Skymas- (2) A634 & (1) AT-EB055, or (1) AT- Pilatus: PC-9 (3) A728B (Pilatus jack point studs
ter, 340 (1) A622 EBZB fit Jacks)
Cessna: All 400 Series except (2) A634 & (1) AT-EB055, or (1) AT- Pilatus: PC-12 (2) A728B & (1) AT-EBZA (Pilatus jack
406 Caravan II (1) A622 EBZB (1) A740C point studs fit Jacks)
Cessna: Citation I 500, II 550, (2) A725B & (1) AT-EBZB Piper: Aztec, Cherokee, Coman- (2) A622 (1) ATS
V 560 (1) A722B che, Seneca
Cessna: Citation CJ1, CJ2, CJ3 (2) A725B & (1) AT-EBZA, (1) AT500-CA Piper: Aerostar & Chieftan (2) A634 (1) ATS
(525's) (1) A521
Cessna: Citation V 560XL, (2) A728C & (1) AT-EBZA Piper: Cheyeene II (2) A734B (1) ATS, (1) ATS-AA72
560XLS (1) A725B
Cessna: Citation III 650, VI 650, (2) A734B & (1) AT-EBZB Piper: Cheyenne III (3) A734B (1) ATS, (1) ATS-AA72
VII 650 (1) A725B

Cessna: Citation 680 Sovereign (2) A734C & (1) AT-EBZA Piper: Malibu PA-46 (2) A627 (1) AT-EBZB, (1) ATS
(1) A734B

Cessna: Citation X 750 (2) A740C & (2) AT-EB015, (1) AT-EBZB Piper: Navajo (2) A634 (1) ATS
(1) A734B

Cessna: Mustang 510 (3) A521 Piper: Saratoga (2) A622 & (2) AT-EB055, (1) ATS,
(2) A627 (1) ATS

800-248-0638 AIRCRAFT TOOL SUPPLY www.aircraft-tool.com 139

 SERVICE & SUPPORT

Alpha
ALPHA AVIATION AIRCRAFT JACKS
For over 12 years, family owned and operated Alpha Aviation has been making high quality
aircraft jacks with the kind of craftsmanship and attention to detail that you just don’t see in mass-
market types. Each jack is hand fabricated, assembled, and thoroughly inspected to ensure that
you will consistently receive the finest aircraft jack for your money. And with over 4,000 units in
service since 1995, Alpha Aviation Jacks are field-proven to provide safe, rock-steady support for aviation inc.
your airplane.
Find your jack: There are 5 models to cover just about every light aircraft. Locate your airplane
in the chart below and select the appropriate jacks. Or if it’s not listed, measure the height from
the ground to your airplane’s jack point and select jacks that are shorter, but with enough range
and load capacity to safely lift your airplane. Need more details? Visit www.aircraft-tool.com and
search for keyword “Alpha Aviation.” 332
AIRCRAFT AIRCRAFT JACK MODEL* TAIL
REQ
BUILDER MODELS (*Any of the indicated models will work) STAND

AERO Commander 112/114/115

326, 332, 838, 868 3 No
COMMANDER

Baron 326, 332, 838, 868 2 Yes

Duke 324 3 No

Bonanza BE33/35/36 324, 326, 332, 838, 868 2 Yes

Debonair BE333 326, 332, 838, 868 2 Yes

BEECH 868W
Duchess BE76 326, 332, 838, 868 2 Yes
AIRCRAFT
Musketeer BE23 326, 332, 838, 868 2 Yes

Sierra BE23 332, 838, 868 2 Yes

Sundowner BE23 326, 332 2 Yes

Travel Air BE95 326, 332, 838, 868 2 Yes

BELLANCA All Low Wing, including SUPER VIKING 324 2 Yes

Cessna 172/177/182/210 868, 868HLW 2 Yes 324

Cessna 310/320 332, 838, 868, 838HLW 3-4 No
CESSNA
Cessna 337 Skymaster 868, 838HLW 2 Yes

Cessna 340/400 series 838, 868, 838HLW 3-4 No

GRUMMAN Cheetah, Tiger 326, 332, 838, 868 2 Yes

MOONEY Ovation, Acclaim 324, 326, 332, 838, 868 2 Yes

Apache PA23 326, 332, 838, 868 2 Yes

Arrow PA28R 326, 332, 838, 868 2 Yes

Aztec PA23 838, 868 2 Yes

Brave PA25 326, 332, 838, 868 2 Yes

Cherokee PA28/PA32 326, 332, 838, 868 2 Yes

PIPER Comanche PA24 324, 326, 332, 838, 868 2 Yes

Lance PA32 326, 332, 838, 868 2 Yes

Saratoga PA32 326, 332, 838, 868 2 Yes

326
Seminole PA44 326, 332, 838, 868 2 Yes
838W
Seneca 1/11/111 326, 332, 838, 868 2 Yes

Twin Comanche PA30/39 324, 326, 332, 838, 868 2 Yes

PART DESCRIPTION CAPACITY RANGE PRICE

AAJ-324 Low Wing Jack 3 Ton (6,000lbs) 24”-40” $311.95
AAJ-326 Low Wing Single & Light Twin Jack 3 Ton (6,000lbs) 26”-43” $311.95
AAJ-332 Low Wing Single & Light Twin Jack 3 Ton (6,000lbs) 26”-49” $351.95
AAJ-838HLW High Lift Cylinder 8 Ton (16,000lbs) 32-63” $496.95
AAJ-838W Universal Jack 8 Ton (16,000lbs) 26”-55” $440.95
AAJ-868HLW High Lift Cylinder 8 Ton (16,000lbs) 32-93” $628.95
AAJ-868W High Wing Universal Jack 8 Ton (16,000lbs) 26”-87” $584.95
AAJ-375 Tail Weight ---- 17”-39” $271.95
AAJ-375EX Tail Weight Extension ---- 16” $33.95 375

All-in-one Kit will raise all of the airplanes listed above (except
Bellancas and Beech Duke). Contains (2) AA-838 and (2) AA-868
AAJ-K1 $2,177.95
Universal jacks, plus (1) AA-375 Tail Weight. This is your best value
if you need to raise more than one type of airplane.

140 800-248-0638 AIRCRAFT TOOL SUPPLY www.aircraft-tool.com

 SERVICE & SUPPORT
DESSER AIRCRAFT TIRE AND TIRE BEADBUSTER
WHEEL BALANCER
BeadBuster all-purpose tire
bead breakers are small but
mighty and will break the tough-
est tire beads! You know those
hard-to-remove tires that are
so frustrating? BeadBusters will
This Wheel and Tire Balancer break them in just a few steps.
does what the Goodyear tire They employ a “clamp and
balancer does at a fraction of ram” method that pushes down
the cost. It will work with any as- on the steel cord inside of the
sembly with at least a 1” axel up tire bead--not the sidewall like
to 35” diameter tire. conventional units--bringing the rest of the tire with it. These com-
pact and lightweight tools are durable and easily portable making
it a perfect toolbox item. And, no adjustment is needed for different
tire/wheel sizes. Save time, money, and frustration by quickly and
easily changing your own tires whenever, and wherever you want.
XB-455................................(Standard)................................$99.95
XB-550.............................. (Heavy Duty)............................ $258.95
AS01.................................................................................. $419.95
AS01-5W........................ (5 oz Wgts- 5 pcs)............................$9.95

WHEEL BALANCER BEADBUSTER TIRE IRONS

McFarlane’s wheel balancer

uses the same static balanc-
ing method that is used to bal-
ance helicopter rotors. This de-
sign features a pivot point that
is easily adjustable on-the-fly
for maximum sensitivity, and
includes bushings to accom-
modate 3/4”, 1”, 1-1/4”, 1-1/8”,
1-5/8” and 2” axle sizes.
If you want to change a tire, you’ll need 2 things: A BeadBuster and
MA129............................................................................... $305.95 this set of tire irons. The BeadBuster will break the bead from the
rim, and the tire irons assist in getting the tires completely off. The
TIRE BEAD BREAKER unique curved shape of the large 15” lever has the perfect shape
for reaching over the lip of the rim to start the job. The shorter levers
are for working your way around the tire. These quality levers are a
BeadBuster exclusive design. They are thicker and heavier than most
tire irons you’ll find elsewhere and are the perfect size for most tires.
ACC-TL3..............................................................................$35.95

TIRE MOUNT LUBE

Excellent for general purpose tire mounting
and de-mounting applications. Our lubricant
paste is designed to assist in mounting rub-
ber tires and tubes on all types of wheels. It is
BO-13M-TBB AB-1 fortified with rust inhibitors to provide protec-
tion against corrosion of the wheels. This mild
This Tire Bead Breaker is capable of working on very small to very formula is worker friendly, and can easily be
large tires and extremely adjustable! It will break the bead between diluted with water for a spray formula. Pack
the tire and wheel without doing damage to the expensive wheels. beads better than any other product due to
BO-13M-TBB......................(18”x16” Base).......................... $216.95 its excellent adhesion, ultra thick consistency
BO-13M-TBB2....................(28”x32” Base).......................... $265.95 and the fact that it doesn’t separate.
AB-1................................. (Meyer Brand)........................... $258.95 ACC-TML.............................................................................$19.95

800-248-0638 AIRCRAFT TOOL SUPPLY www.aircraft-tool.com 141

 SERVICE & SUPPORT
BOGERT AVIATION TOW BARS BOGERT AVIATION JACK PADS

Bogert Aviation tow bars are built from steel for maximum durability
and are chip resistant to look great for years. It is made with rubber
grips on the handle and spreader bar for comfortable use. Light
enough to stow on your airplane!
TAIL WHEEL
PART AIRCRAFT PRICE
• Rubber Padded • Jack Ram 1.25” Diameter
BO-04M-ABI Alaskan Bushwheel $163.95
• 3/4” Ball jack point • Made in the USA
BO-04M-API Aviation Products Tail Wheel $163.95
Follow aircraft service manual instructions for jacking
BO-04M-RV Vans RV3, RV4, RV6, RV7, RV8, and RV9 $163.95
SINGLE /
BO-04M-TDG Scott 3200 and 3400 $163.95 PART AIRCRAFT PRICE
PAIRS
BO-04M-XP Cessna XP Modification $163.95
BO-30M-B90 Beechcraft 90 Single $373.95
NOSE WHEEL
BO-30M-C210 Cessna 210, 177RG Pairs $100.95
PART AIRCRAFT PRICE
BO-30M-C300 Cessna 300, 400 & 500 Single $58.95
BO-04M-AIRGLAS Airglas nose fork towbar $180.95
BO-30M-C337 Cessna 337 Series Pairs $100.95
Beechcraft - Bonanza, Debonair, Duchess,
BO-04M-35 Duke & Skipper, and Baron, T-34A, (Fits .25” $163.95 Cessna C-120, 140, 150,
Strut Pin) 170, 172, 175, 180, 185. 182,
188, 190, 195, 205, 206, 336,
Beechcraft - Musketeer, Sport, Super, Sund-
BO-04M-19/23B $163.95 337, flat gear 177RG, Piper
owner & Sierra BO-30M-FPP Pairs $130.95
Tomahawk, Beech Skipper,
BO-04M-B-90 Beechcraft -Twin Beech, King Air, Queen Air $163.95 Champion, Bellanca, Dia-
Cessna 150, 152, 162 Skycatcher, 172, 175, mond DA20/DA40 and similar
BO-04M-172 $163.95
177, 182 Also RV-4 spring steel landing gear.
Cessna 182 S (1996 and up) and T (2001 BO-30M-MO Mooney M20 Series Pairs $100.95
BO-04M-182-XL and up) models with long nose. Towbar $180.95
extends to 55” and closes down to 35”. Beechcraft Musketeer,
BO-30M-MUSK Pairs $142.95
Beechcraft Sundowner
BO-04M-SR Cirrus SR 20 & 22 Series $163.95
Cessna C-172RG, 177RG,
BO-04M-DA20 Diamond DA20 $163.95
BO-30M-R 182RG, 210, T210, P210, and Single $100.95
BO-04M-DA40 Diamond DA40 $163.95 similar landing gear.
BO-04M-DA42 Diamond DA42 $299.95 BO-30M-RG Cessna 182RG, 172RG Pairs $100.95
AMD-CH-2000, Gulfstream American AA1 Fits RV aircraft that have a
BO-04M-AA $163.95
& AA5
BO-30M-RV threaded tie down rings with Single $90.95
BO-04M-LANDIS Landis nose fork $180.95 3/8-16 threads
BO-04M-MOON Mooney aircraft $163.95 BO-30M-SR Cirrus SR20, SR22 Pairs $100.95
BO-04M-NAVION Navion Aircraft towbar $163.95 Visit www.aircraft-tool.com for complete details on jack pads.
Piper Comanche PA-24, PA-30 & PA-39 Also
PA-32 Cherokee Six axle w/pants if tabs
BO-04M-24/30 $163.95
above wheel are broken. (Not verified for
Piper Saratoga with fixed gear)
BO-04M-PA46 Piper Malibu, Meridian & Mirage - Hand Pull $299.95
Piper PA-28R Series - Hand Pull for dog-leg
BO-04M-28R style gear, also fits Saratoga/Lance Retract- $299.95 Two great ways to stay up to date on
able, PA-46, Malibu, Mirage, Meridian
our expanding inventory!
BO-04M-RV10 Vans - RV10, RV14A $163.95
1. Browse the “What’s New” section on our website.
BO-04M-RVA Vans - RV6A, RV7A, RV8A,RV9A, & RV12 $163.95
2. Sign up for our E-Blast at the bottom right.
View the complete listing online at www.aircraft-tool.com

142 800-248-0638 AIRCRAFT TOOL SUPPLY www.aircraft-tool.com

 SERVICE & SUPPORT
SEAT RAIL WEAR GAUGE DYKEM CROSS-CHECK™

For checking seat rail wear limits as per

FAA Airworthiness Directive 2011-10-09,
Effective 06/17/2011 Seat Rail Directive
and its predecessor A.D. The gauge is
used for inspection of seat rail wear in
Cessna aircraft. It’s designed to mea-
sure the actual radius wear near the
seat stop holes. The size applies to the
.42 diameter limits referred to by the A.D. The .020 upper surface DYKEM® Cross-Check™ is a convenient visual method for identifica-
wear allowance allowed by the A.D. is designed into the gauge. tion of vibratory loosening or tampering in nuts, bolts, fasteners, and
SR1...................................................................................... $43.95 assemblies. Marks will be easily broken if parts are tampered with or
become loose. Highly visible marks. Excellent adhesion to metal and
other substrates.
PIPER TAPER PIN REMOVAL TOOL
83314................................... (Orange)...................................$6.95
83315.................................... (Green)....................................$6.95
Piper AD 2010-15-10 re-
quires inspection of the 83316...................................... (Red)......................................$6.95
connection between 83317.................................... (Yellow)....................................$6.95
the control yoke univer- 83318......................................(Blue)......................................$6.95
sal joint and the shaft
on the forward end of
WEAR GAUGES
the joint. This taper pin removal tool makes this job easy and safe
even with the most stubborn taper pins. Simply position the tool on
the u-joint and tighten the bolts until the pin breaks free.
MA107.................................................................................$82.95

HINGE BEARING TOOL KIT

• Seven piece kit for com-
mon bearing sizes
Airworthiness Directive AD2011-10-09 requires the inspection of the
• Heat treated stainless steel
rollers, roller housings, seat rails, engagement pin and attaching
will last a lifetime
hardware. In all, there are five measurements that are required for
• Kit comes in a convenient
the pilot and copilot seat assemblies. These two tools will shorten the
storage pouch
time to make these five compliance measurements to only two min-
This unique tool is specifically
utes! TOOL-A measures the pin engagement, roller tang width, and
designed to prevent dam-
roller tang thickness, and TOOL-B measures the seat rail hole wear,
age when installing or remov-
and the opening of the roller housing tangs.
ing sintered bronze elevator
and rudder hinge bearings in AD2011-10-09.....................................................................$46.95
Cessna aircraft.
MA990.................................................................................$75.95 FISH SCALES

CESSNA FLAP TRACK GAUGE/ INSTALLATION TOOL

MA950
NB6084 5A354

MA970

Use the flap track gauge to quickly determine if your aircraft track guides A fish scale is used to measure aircraft weights and forces such as
are within tolerance. The installation tool holds parts in alignment while control stick force, landing gear forces, and tail weight. Each scale
inserting the bolt for Cessna 150 thru 210. is accurate to .5 lbs (8oz).
MA950...........................(Flap Trap Gauge).........................$42.95 NB6084......... (Digital, 0 to 150 lbs, .5 lbs accuracy)..........$15.95
MA970............................(Installation Tool)...........................$40.95 5A354............. (Brass, 0 to 50 lbs, .5 lbs accuracy)..........$129.95

800-248-0638 AIRCRAFT TOOL SUPPLY www.aircraft-tool.com 143

 SERVICE & SUPPORT
MULTISUMP FUEL TESTER COMPASS SCREWDRIVERS
23880

906 AE8505
27810

• Stainless steel push rod • Clear construction These compass screwdrivers are totally non-magnetic. Strictly de-
• One hand operation • Check up to 8 sumps
signed to adjust magnetic compasses or great for other applica-
• Quick-acting drain • No drip pour spout
valve tions where you need a small blade screwdriver.
906...................................... (ATS Brass)..................................$9.95
Simply draw a sample from the sump and inspect it in the upper
AE8505....................... (Avery Stainless Steel).......................$10.95
sampling cup. Transfer the fuel to the lower catch can by tipping
the sample cup in any direction. The MutiSump can check up to 8
sumps before needing to be emptied. Optional fuel strainer snaps
onto the bottom of the MultiSump and utilizes a micro-mesh stain-
less steel screen to keep impurities and water from entering the fuel FUEL TESTER
tank during pour back.
23880.................................(Fuel Tester)...............................$26.95
27810............................... (Fuel Strainer)...............................$9.95

WHEEL CHOCKS Protect yourself from fuel contamination by visually checking the fuel
These tire stops keep the for water and debris. Fits all quick-drain valves and has an adapter
aircraft securely parked. A for recessed drains. The transparent cylinder is 6” or 4” long with oc-
pair of black molded plastic tane color-coding molded in the side. Also includes a screwdriver
wheel stops are connected blade with both Phillips and slotted heads.
with a 22” bright yellow and AFT-1........................................ (6”).......................................$6.95
black braided nylon rope
AFT-SHORT................................ (4”).......................................$6.95
that won’t rot or retain water.
The bottom cleats keep air- AFT-C.......................................(Cup)......................................$5.95
craft securely parked, and the concave design fits any aircraft tire.
One pair is needed for each wheel.
ASA-CHOCKS....................................................................... $37.95
CONTROL LOCK
REMOVE BEFORE FLIGHT BANNER
A “remove before flight”
streamer hangs off the
cover as a prominent pre-
flight reminder to pilots.

PTC-34................................(Large 3/4”)............................... $14.95

PTC-58................................ (Small 5/8”)...............................$14.95
PTC-B......................................(Blade)..................................$14.95
ASA-RBF.................................................................................$7.95

CARBON MONOXIDE DETECTOR Gusty winds will cause unsecured control surfaces to flail about and
control sticks to thrash around inside the cockpit and most certainly
This Carbon Monoxide Detector can save will cause damage to your airplane if measures aren’t taken to se-
a pilot’s life, especially when flying with the cure them. That’s why this lightweight, space-saving control lock is
heater on, by warning of the presence of for you. It will quickly lock the control stick in place, thus keeping your
CO in the cockpit—the spot will turn gray/ ailerons and elevators in a safe and firm position.
black when CO is in the air. The spot on the
detector returns to normal color after it is ex- DAS-CL100....................(General Aviation)..........................$80.95
posed to fresh air. Useful life is 90 days once DAS-CL100.........................(Piper Sport)..............................$80.95
opened. Not for use with Diesel engines. DAS-CL200................ (RV, Cessna, and Cub)......................$80.95
ASA-CO-D.............................................................................$4.95 DAS-CL230............................. (RV12)...................................$80.95

144 800-248-0638 AIRCRAFT TOOL SUPPLY www.aircraft-tool.com

 SERVICE & SUPPORT
HOSE ASSEMBLY TOOL

These hose and fitting assembly mandrels are designed for all straight fittings in Aeroquip
303 and Stratoflex 111 series. These hose types are common to most hydraulic, pneu-
matic, coolant, fuel and oil systems specified in MS33620 for aircraft applications.

PART HOSE SIZE FITTING NUMBER THREAD SIZE PRICE

2701-3 -3 300-3 3/8-24 $18.95
2701-4 -4 300-4 7/16-20 $14.95
2701-5 -5 300-5 1/2-20 $14.95
2701-6 -6 300-6 9/16-18 $19.95
2701-8 -8 300-8 3/4-16 $21.95
2701-10 -10 300-10 7/8-14 $29.95
2701-12 -12 300-12 1-1/16-12 $37.95
2701-KIT All mandrels listed above plus case $155.95

THE TUBECUTTER™ HOSE CUTTER ADEL CLAMP INSTALLER AVERY ROD END BEARING
ADJUSTING TOOL

Tool designed for installing and removing rod

end bearings without damage to the bear-
The TubeCutter™ is guaranteed to produce a ing, when screwing rod end bearing into nut-
clean, square cut every time. It cuts through These pliers make cushion clamp installa- plates. Tool puts the pressure on the housing
Aeroquip lines, rubber tubing, plastic tubing, tion so easy that you will no longer dread the - not the bearing. Precision machined tool
hydraulic hoses, and pneumatic lines. It’s so installation process. This tool securely and has 2 different width slots (3/8” & 7/16” wide)
strong, it’ll even cut through Kevlar reinforced simply clamps the entire assembly together machined in either end to match the (2)
hoses! Manufactured from drop forged steel and leaves the hardware holes lined up. The common sizes for rod end bearings (5/16-
and chrome plated for durability. mechanic is free to use both hands to fit the 24 & 3/8-24) common to RV aircraft. Comes
UG1234............................................$36.95 hardware. with drive handle.
UG1234-B........(Rep Blade).................$9.95 SMA-101...........................................$39.95 AE408...............................................$19.95

800-248-0638 AIRCRAFT TOOL SUPPLY www.aircraft-tool.com 145

 SERVICE & SUPPORT
MINI-MIXER SEMKIT PACKAGE MIXER SEMCO® AIR SEALANT GUN

The mini-mixer conveniently fits onto any air or electric drill with a
3/8” chuck and will work with both injection and barrier style pack-
ages. Use the mini-mixer to reduce fatigue and provide a more
uniform mix than is possible by hand. The mini-mixer is tiny enough
to fit into your shirt pocket, yet it will perform the same job as the
larger industrial mixers. The Semco air sealant gun is designed for the quiet, pneumatic ap-
MMX01................................................................................$24.95 plication of sealants, adhesives, potting compounds, and other ma-
terials packaged in PRC® disposable cartridges. The gun is made
of metal and plastic and is engineered to withstand the rigors of
the production work place. The handle can be removed to allow
SEMCO® HOSE ASSEMBLY more clearance and better manipulation in confined areas. Note:
The air hoses required to operate Semco air sealant guns are sold
separately.

PART DESCRIPTION PRICE

All hose assemblies come with a B-nut fit-
ting to attach to the Semco gun and the 250A-2 Pistol grip gun with 2.5 oz. Metal retainer $400.95
250A-6 Pistol grip gun with 6 oz. Metal retainer $406.95
specified quick connect attachment. Each
hose is 5 ft (1.5m) long. 250-2R 2.5oz. metal retainer for 250 series dispensers $75.95
250-6R 6oz metal retainer for 250 series dispensers $82.95

PRC-5A..............(With ARO Quick-Connect Fitting)..............$39.95 SEMCO® MANUAL SEALANT GUN

PRC-5H........... (With HANSEN Quick-Connect Fitting)...........$69.95
PRC-5S......... (With SCHRADER Quick-Connect Fitting).........$69.95

PRC® DISPOSABLE CARTRIDGES AND NOZZLES

Semco disposable cartridges are

molded from high density poly-
ethylene, which makes them ca-
850-6
pable of handling a wide variety
of chemical fluids for storage and
application. Use them to load
your own adhesives, sealants, lu- 850-2
bricants, or other media.
The Semco model 850 gun is a hand-operated, high quality dispens-
ing gun designed to accept Semco disposable cartridges or Semkit
PART DESCRIPTION PRICE
packages. It is excellent for the “in-field” application of sealants, ad-
PRC-2PW 2.5 oz. Disposable cartridge $2.95 hesives, and other materials. A threaded retainer provides a tight fit
PRC-6PW 6 oz. Disposable cartridge $3.25 into the ratchet handle, permitting uninterrupted operation.
PRC-255N 2” nozzle, no orifice $2.15
3-1/2” nozzle, no orifice PART DESCRIPTION PRICE
PRC-415N $2.15
PRC-420N 3-1/2” nozzle with 1/16” orifice $2.15 850-2 Manual Gun with 2.5 oz. Metal retainer $138.95
3-1/2” nozzle with 3/32” orifice 850-6 Manual Gun with 6 oz. Metal retainer $147.95
PRC-430N $1.95
3-1/2” nozzle with 1/8” orifice
PRC-440N $2.15 850-2R 2.5oz. metal retainer for 850 series dispensers $48.95
850-6R 6oz metal retainer for 850 series dispensers $53.95
SEMCO and SEMKIT are registered trademarks of PRC DeSoto International

146 800-248-0638 AIRCRAFT TOOL SUPPLY www.aircraft-tool.com

 SERVICE & SUPPORT

ATS PRO TUBE

BEADING KIT
The finest beading tool money can buy. We Guarantee it!

Makes perfect beads

from 1/4” to 1”

Meets MILSPEC MS33660D and SAE AS5131 Standards

Looking for a tube beading kit that will last a lifetime? Yes, a lifetime! The Pro Tube
Beading Kit carries the ATS Pro lifetime warranty guarantee. It is a kit that has been the
number one choice of mechanics for making clamping beads in metal tubes.
For years, Aircraft Tool Supply was the sole supplier of these tools as a surplus product.
Eventually supply exhausted, however customers insisted that they take the necessary
steps to bring them back in stock.
In the process of recreating this classic tool, Aircraft Tool Supply added a few enhance-
ments to further elevate this kit. The new improvements include ground, hardened, and
polished surfaces for mar-free beads in aluminum, copper, brass, and mild steel tubes
ranging from ¼” to 1” in diameter.
Also available are our ATS Pro Mini Beading Kits (p/n TB145A series). They use the
same components and have the same exceptional quality as the Pro Beading Kit.
Each kit is designed to cover a set of commonly used sizes, and can be easily
upgraded by adding more dies and frames as needed.
Here’s my personal guarantee to you: Try our ATS Pro Beading Kit for 30 days
and if you’re not 100% satisfied, call me toll free at 1-800-248-0638 and I will
personally make sure that you get a full refund including your shipping costs.
No questions asked. -- Des Lynch, Owner

PART TUBE SIZES PRICE

TB145A-1 1/4” $169.95
TB145A-2 3/8”, 1/2”, & 5/8” $189.95
TB145A-3 3/4”, 1” $189.95
Scan to view video AP145 ATS Pro Beading Kit all sizes 1/4” to 1” $459.95

800-248-0638 AIRCRAFT TOOL SUPPLY www.aircraft-tool.com 147

 SERVICE & SUPPORT
IMPERIAL® TRIPLE HEAD BENDER IMPERIAL® 37° HEAVY-DUTY FLARING TOOL

Forms 37° flares in annealed

stainless steel (MIL-T-6345 or
AMS5566), cold drawn stain-
For making 45°, 90° and offset bends in tub-
less steel, copper, aluminum,
ing. Bends aluminum, copper, steel and other
brass, and other soft metals.
metal tubing.
Ball thrust bearing mecha-
nism reduces the effort re-
Flares 1/8” stainless steel quired to produce perfect
primer lines! 37° flares, even in stainless
steel. Made of hardened tool
367FH...................... (Bends 1/8”, 3/16” & 1/4”)....................$32.95 steel, and features a non-slip grip which securely holds tubing, even
after repetitive flaring. Extension on bar can be clamped in a vise
368FH................. (Bends 3/16”, 1/4”, 5/16” & 3/8”)...............$39.95
for extra support. Able to flare 1/8” 3/16” 1/4” 5/16” 3/8” and 1/2”
O.D. tubing.
447F.................................................................................. $373.95
ROL-AIR® 37° FLARING TOOL
ROL-AIR® 37° AVIATION FLARING TOOL
The industry standard Rol-
Air® is the choice of pro- Forms 37° flares in aircraft
fessionals. Flares soft cop- grade stainless steel (MIL-
per, aluminum and brass T-6845), titanium, and other
tubing. The faceted hard metal tubing, both soft and
chrome coated cone hard. Positive stop gauge
rolls out perfect 37° flares assures correct size of flare.
above the die block, and The three rollers in the flar-
then automatically bur- ing cone roll out 37° flares
nishes the flare face while above the die block while
maintaining the original Flares T6845 aviation burnishing the flare face to
wall thickness at the base of flare. New slip-on yoke permits use in grade stainless steel
a smooth finish. A built in
tight quarters. Satin chrome and black finish. Able to flare 3/16” 1/4” extension on the yoke can be clamped in a vise for extra support.
5/16” 3/8” 1/2” and 5/8” O.D. tubing. Not recommended for stain- Satin chrome and black nickel finish. Note: Use of the optional 401FA
less steel. Reamer Yoke is recommended when flaring aviation grade stainless
507FB..................................................................................$95.95 steel tubing.
400F......... (3/16”, 1/4”, 5/16”, 3/8”, 1/2”, & 5/8” Tubing)...$398.95
401FA........ (Optional Reaming Yoke for Stainless Steel)......$69.95
402FA................. (Kit Consisting of 400F & 401FA).............$415.95
LEVER TYPE TUBE BENDERS
IMPERIAL® ROTO-LOK™ TRIPLE HEAD 180° TUBE BENDER

This improvement on the old “Imp”

3-in-1 bender (368FH), features Im-
perial’s patented Roto-Lok™ quick-
action indexing lever. It’s a two-
stage handle that automatically
repositions itself midway through
Each tool only bends one size. Open side type which slips over the
bend to allow easy fabrication of
tube at any point. Makes smooth short radius bends up to 180° in
bends up to 180° with reduced ef-
aluminum, copper, and mild steel.
fort, better control and no crossing
TUBE BEND WEIGHT of handles
PART PRICE
DIA. RADIUS (LBS) Up to 180 degree bends in sizes:
4-2829 1/4” 9/16” 1 $52.95 3/16”, 1/4”, 5/16”, and 3/8” O.D.
5-2829 5/16” 11/16” 1 $69.95 tubing.
6-2829 3/8” 15/16” 2 $59.95 • Bend radii are: 7/16”, 9/16”, 11/16”, and 15/16” respectively.
8-2829 1/2” 1-1/2” 3 $117.95 • Works with copper, aluminum, brass, thin wall steel, and thin wall
10-2829 5/8” 3” 6 $153.95 stainless.
12-2829 3/4” 3” 7 $215.95 470FH.......... (Bends 1/8”,3/16”,1/4”,5/16” & 3/8” O.D.)........$41.95
370FH................... (Bends 1/4”, 3/8” & 1/2” O.D.).................$51.95

148 800-248-0638 AIRCRAFT TOOL SUPPLY www.aircraft-tool.com

 SERVICE & SUPPORT
TUBE BENDER PARKER 37° FLARING TOOL

Special nylon forms prevents kink-

ing or flattening. Easy to use with
one end of the tube connected,
or the unit can be mounted in a
vice. For 3/16”, 1/4”, 5/16”, and
3/8” O.D. tubing. Not recom-
mended for 3/8 steel.
44000..................................................................................$18.95

The Parker Hannifin flaring tool is designed to make perfect 37° flares
JUMBO ROD BENDER in aluminum, copper, brass, and mild steel tubing. The hardened
tri-fluted cone burnishes the tubing as it creates the flare without
scoring the surface. A built-in stop positions the tube prior to flaring
so that your flares are always perfect. Tube Sizes 1/8”, 3/16”, 1/4”,
5/16”, 3/8”, 7/16”, 1/2”, 5/8”, 3/4”.
212FB................................................................................ $109.95

IMPERIAL® 8 PIECE TUBE BENDER KIT

BAC Industries Jumbo Rod Bender bends a variety of wires up to 3/8”
diameter. Forms round, square and flat stock into hooks, ‘S’ loops,
and other bends 3/16”, 1/4”, 3/8”, 5/8”, and 3/4” radius.
MR-01..................................................................................$31.95

IMPERIAL® RATCHETING TUBE CUTTER

A mini-tube cutter mounted in The patented spring coil design of these tube benders allows you
a ratcheting handle to quickly to bend aluminum and copper tubing in to complex shapes with-
cut through copper, aluminum, out crushing or creasing the tube. Simply slip the belled end of the
brass, steel, stainless steel, mo- bender over the tubing and slide to the point to be bent. Complete
nel, titanium, and other tubing. kit contains eight (8) benders for tube sizes: 1/4”, 5/16”, 3/8”, 7/16”,
Cuts from 1/8” to 7/8” O.D. tub- 1/2”, 5/8”, 3/4”, and 7/8” OD.
ing. Mini tube cutter can be re- 201-F...................................................................................$27.95
moved from handle and used to
cut tubing in tight areas (requires
only 1-1/4” clearance).
TC1050RH...........................................................................$23.95
TUBE CUTTERS

INNER-OUTER REAMING AND

DEBURRING TOOL
Reams both the inside and outside 374FC 127FB
edges of 3/16” to 1-1/2” diameter
Heavy-duty cutter makes clean, right angle cuts with absolutely no
tubes with the aid of three hollow
burrs. Kit includes roller, spare cutting wheel and foldaway reamer.
ground cutters. Fluted body fits com-
Cuts or constricts tubes from 1/4” to 1-5/8” (6-413mm). Hardened
fortably in the palm of your hands.
roller and cutter for long working life.
208F.................... (Copper, Alum., & Soft Metals)................$22.95 374FC......................... (Deluxe Tube Cutter)........................$17.95
208SS................................. (All metals)............................... $62.95 127FB............................ (Mini Tube Cutter)............................$7.95

800-248-0638 AIRCRAFT TOOL SUPPLY www.aircraft-tool.com 149

 SERVICE & SUPPORT
INLINE AIR OILER ULTRA FLEXIBLE 3/8 PREMIUM HYBRID HOSE
• Offers increased cold weather
Automatically feeds your air tools with flexibility over - competitive hoses:
the proper amount of oil for longer -40 to + 150 degrees F.
tool life. 1/4” NPT thread. • Made of a hybrid polymer, non-
marring material
• 3/8” ID hose has 1/4” male NPT
brass fittings
5830....................................................................................$11.95 • Has 300 PSI pressure rating

Ultra Air takes hybrid to a new level, with increased cold weather
flexibility over competitive hoses. When uncoiled, the hose lays flat
making it easier to use with no interruption in air flow.
SWIVEL CONNECTOR
575-100A...............................100 FT...................................$39.95
575-50A..................................50 FT....................................$19.95

INDUSTRIAL AIR HOSE WITH FITTINGS

2563 7922R • Inside diameter: 3/8”.

• Max pressure: 200 psi.
• Fittings: 3/8 npt.
Eliminates twisted air hoses forever. This connector swivels 360° and
keeps your air hose straight no matter how your tool is held. Screws
into any 1/4” NPT air tool. I
2563.................................................................................... $13.95
7922R............................... (W/ Regulator).............................$12.95 PART ID MAX. PSI FITTING LG PRICE

610 3/8” 200 1/4” NPT 25’ $28.95

611 3/8” 200 1/4” NPT 50’ $38.95

THREE IN ONE AIR LINE MANIFOLD AIR HOSE COUPLERS

Supply three air tools from one source! Use

on air hose end or as permanently fixed
bench outlet. No need to disconnect/con-
nect to use different tools. Three 1/4” NPT out-
MC20F MP20M
lets and a single 1/4” NPT inlet makes this a
useful shop accessory. “Quick connect” style plugs and sockets will attach to any 1/4” air
line. 1/4” pipe thread fittings.
3404.................................................................................... $11.95
MC20F........................... (Female Socket).............................$4.95
MP20M............................... (Male Plug).................................$2.05

SIDE WINDER AIR HOSE REEL

PROFESSIONAL AIR REGULATOR The Side Winder air hose reels al-
lows you to coil and uncoil your
air hose neatly and quickly to
prevent damage. They have two
built-in tool hangers to keep your
air chuck, blow gun, or other air
5401 tools handy, and their constant
1824 1370 supply 1/4 in. NPT brass swivel
keeps air flowing freely and can
Fits any tool with 1/4” thread.
handle up to 250 psi, even when
1824...............................(Positive Locking)..........................$14.95 dispensing or winding the air
5401..................................... (Regular)...................................$7.95 hose!
1370....................................(W/Gauge)...............................$12.95 50350..................................................................................$78.95

150 800-248-0638 AIRCRAFT TOOL SUPPLY www.aircraft-tool.com

 SERVICE & SUPPORT
PHENOLIC SCRAPERS DUALCO™ COMPACT GREASE GUN

Phenolic scrapers
are perfect for
A safely removing sealants, adhe-
sives, stickers, labels, grime, and
more. They are extremely durable
B and will easily slice through seal-
DL10350-SL3
ants, but will not damage the un-
derlying structure.
PART FIG TYPE SIZE PRICE Dualco is a leading provider of quality lubricating equipment, and
their Compact Grease Gun is among their most popular product.
PH01 a Hand 3/4” x 8” $4.95
Its durable cast aluminum construction is designed to last a life-
PH02 a Hand 1” x 8” $4.95
time, and has a precise delivery system to apply just the amount
PH03 a Hand 1-1/2” x 8” $5.95
of grease you need. It’s self-priming and accepts tubes with 9/16-
PH04 a Hand 2” x 8” $7.95
18 threads. A wide variety of tips are available for any application.
PHRG01 b Air Gun 2” x 9” $38.95
Made in the USA. 100% repairable and recyclable.
PHRG02 b Air Gun 2” x 3-3/4” $29.95
• Compact and easy to use • Durable all metal construction
PH-SET Set of all 6 scrapers $61.95
• Self activated priming • Quick service, refill & cleaning
• Ground plunger & ball check • Pinpoint accuracy
DL10350-SL3......................(Combo Kit)..............................$14.95
SR CUTTER 5 PACK DL10350..............................(Gun Only).................................$9.95
21030..................... (3 oz Tube of Grease Only).....................$5.95

DUALCO™ GREASE GUN ACCESSORY TIPS

The “SR” Sealant Cutters from 3M tackle

the difficult job of removing aircraft seal-
ants in a wide range of situations includ- A-STANDARD B-NEEDLE C-HYDRAULIC
ing aircraft wing fuel tanks. Because SR Cutters have a hollow core,
they can remove sealant around the heads of aircraft fasteners
such as rivets, Hi-Loks or bolts.
30095-5PK......................(#8 .83”X1.015”)...........................$29.95
30096-5PK.......................(#3 .40”X.975”)............................$25.95
D-AIRCRAFT 90° E-AIRCRAFT 45°

SR RADIAL BRISTLE DISC 10 PACK

There’s a Dualco tip for every greasing application. Our listing be-
low features a selection of the more popular tips. Each tip features
a 1/8” NPT male thread to fit into a Dualco, or any other standard
grease gun.

PART NUMBER STYLE LENGTH PRICE

DL10503 A 13/16” $3.95
DL10530 C 2-1/2” $10.95
DL10546 B 2-1/4” $12.95
When used at recommended operating speeds, our Scotch-Brite™ DL10547 B 4-1/2” $13.95
SR Radial Bristle Disc removes thin layers of sealants, silicones, RTVs DL10555 B 12” $19.95
and adhesives from most surfaces without removing the underlying
paint or coating. Bristle products have no hard edges the way other DL10560 D 6” $24.95
wheel products do, so they can be compressed to fit into curves DL10570 E 6” $26.95
and hollows without inducing damaging gouges and trails on the
DL10581 A 13/16” $3.95
work piece.
DL10583 A 4-1/2” $11.95
30097-10PK....................(#8 .83”X1.015”)...........................$50.95
30098-10PK.....................(#3 .40”X.975”)............................$50.95 DL10586 A 2-1/2” $10.95

800-248-0638 AIRCRAFT TOOL SUPPLY www.aircraft-tool.com 151

 SHOP EQUIPMENT
BRANSONIC MODEL 1800 ELMASONIC CLEANER

Bransonic Ultrasonic Cleaners are faster,

more consistent and safer than many
other methods. They are powerful
enough to remove grease, and heavy
EP10H EP40H
oils; yet completely safe for delicate
items such as electronic components Choose the easily operated Elmasonic E Plus for fast and thorough
and fuel injectors. cleaning of a wide range of parts and instruments. Sweep frequen-
cy assures uniform cleaning action. The user activated Pulse mode
TANK SIZE CAP. (QT) OVERALL SIZE WGT.
adds bursts of 20% additional power to remove stubborn contami-
(LXWXD) (LXWXH) (LBS)
nants, to quickly degas fresh cleaning solutions or to prepare lab
6” x 5.5” x 4” 2 10” x 12” x 11.5” 7 samples.
B1800-MT............ (Mechanical Timer, Unheated).............. $465.95 PART TANK SIZE DESCRIPTION PRICE
B1800-MTH........... (Mechanical Timer & Heater)............... $515.95 NO. (LXWXD)
B1800-DT................. (Digital Timer, Unheated).................. $604.95 EP10 7.5 x 3.3 x 2.4 0.25 Gal. $373.95
B1800-DTH.................(Digital Timer & Heater).................... $652.95
EP10H 7.5 x 3.3 x 2.4 0.25 Gal. w/ Heat $446.95
BRANSONIC TRAYS EP20H 5.9 x 5.4 x 3.9 0.50 Gal. w/ Heat $495.95

EP30H 9.4 x 5.4 x 3.9 0.75 Gal. w/ Heat $630.95

The Bransonic trays hold EP40H 9.4 x 5.4 x 5.9 1.00 Gal. w/ Heat $882.95
parts to prevent them EP60H 11.8 x 5.9 x 5.9 1.50 Gal. w/ Heat $990.95
from touching the inside
of the tank. EP100H 11.8 x 9.4 x 5.9 2.50 Gal. w/ Heat $1,159.95

EP120H 11.8 x 9.4 x 7.9 3.50 Gal. w/ Heat $1,495.95

EP180H 12.9 x 11.8 x 7.9 5.00 Gal. w/ Heat $1,995.95

B100-410-160................ (Perforated Tray)......................... $109.95
EP300H 19.9 x 11.8 x 7.9 7.50 Gal. w/ Heat $2,395.95
B100-410-170.....................(Solid Tray)...............................$95.95
B100-916-333.................... (Mesh Tray)...............................$69.95 BASKETS
For more options visit our webstite www.aircraft-tool.com Baskets hold parts being cleaned
because the parts should not
BRANSONIC MODEL B200
come in contact with the clean-
The popular B200 is a compact and stylish ing tank itself. Baskets rest on
unit intended for cleaning smaller, more del- supports so that they too do not
icate components such as injector nozzles. come in direct contact with the
It includes a cover, and parts basket. 1 qt tank bottom or walls.
capacity 6.5” x 3.5” x 2.5” tank size.
PART NO. TANK PRICE
B200.................................................................................. $169.95 1004170 EP10 $54.95

1004170 EP10H $54.95

BRANSONIC ULTRASONIC
CLEANING SOLUTIONS 1004209 EP20H $59.95

1004176 EP30H $68.95

1004232 EP40H $74.95

Pour on the cleaning power with Bran-
son cleaning solutions! 32 oz bottle. 1004243 EP60H $99.95

1004178 EP100H $209.95

PART DESCRIPTION PRICE 1004277 EP120H $209.95

BRANSON-JC Jewelry cleaner for very delicate parts $13.95 1004275 EP180H $237.95
BRANSON-IS Industrial Strength maximum cleaning $15.95
BRANSON-MC3 Metal Cleaner safe for alum. & titanium $14.95 1004271 EP300H $273.95

152 800-248-0638 AIRCRAFT TOOL SUPPLY www.aircraft-tool.com

 SHOP EQUIPMENT
PRIMER PISTOL™ ATS PRO MINI VACUUM
We’ve redesigned our popular Mini
Vacuum Cleaner to provide even
more quality and value for your mon-
ey. The vacuum housing section is
now manufactured from cast alumi-
num, and the valves are made from
marine-grade brass.

Primer Pistol™ is the simple and cost effec- Lifetime Warranty

tive way to apply small amounts of primer

paint and liquid with minimal cleanup time.
It’s a very handy tool that uses disposable ATSMV01................................................................................................................$26.95
35mm film canisters as the delivery jar so
that you’ll use that expensive primer in stingy WONDER GUN AIR VACUUM
amounts. It also makes cleanup a snap -- A two-in-one tool that’s both an air
just throw away the jar and the pickup tube operated vacuum cleaner, as well
and you’re done. A great toolbox item for as a blow gun. Use it as a vacuum
touch-up work. cleaner to pick up metal shavings,
SA-PP01..........(Primer Pistol)..............$15.95 liquids, and small parts. As a blow
SA-PP01H....(Rep Tubes- 10pc) ...........$1.95 gun, it can be used to clear debris
161932.............(Canisters)..................$0.60 from work areas, clean up machines,
etc. 1 year warranty.
PRECISION OILER

WG01....................................................................................................................$35.95
A Precision Oiler is a highly accurate lubri-
cation tool intended for anyone working with LED WORK LIGHT
small mechanical parts. The needlepoint
tip allows for the precise placement of oil in
confined areas. The smooth thumb actuator
lets you control the release of lubricant from
the reservoir in small droplets. The Precision
Oiler includes a screw-on cover and pocket
clip for use on the go.
GT589...............(General).................$10.95
15200T................ (Titan)...................$11.95

GREASE JOINT REJUVENATOR WL300R WL100

WL500

LED trouble drop lights are ideal for use in the hangar, workshop, or home, providing 750
lumens of hands-free lighting for workshop jobs and maintenance requiring close proximity
illumination. The long-lasting LEDs are fully integrated (no more changing out delicate halo-
gen bulbs) and produce much less heat than a halogen work light, making them a safer
option for the job site.
The Grease Joint Rejuvenator opens These sturdy drop lights feature a durable metal Gorilla cage to protect the bulb, a built-in
clogged grease joints and fittings effortlessly on/off switch, a 3-prong socket, and a hook at the top for convenient placement during au-
in less than a minute. Loosens dried grease tomotive work or for lighting dim areas. Plus, the generous 25 ft. cord gives you the freedom
in joints with just a tap. Also comes with a to shine bright light anywhere it’s needed.
flexible shaft.
WL500................................................. (LED Battery Drop Light).............................$59.95
7862......... (Professional Model)........$49.95 WL300R...............................................(Corded LED Drop Light)............................$41.95
7864............. (Pocket Model)............$29.95 WL100................................................... (LED Drop Light Bulb)...............................$17.95

800-248-0638 AIRCRAFT TOOL SUPPLY www.aircraft-tool.com 153

 SHOP EQUIPMENT
MULTI-PORT AIR GUN HEAVY DUTY PRODUCTION PAINT GUNS

Designed for day in and day out professional

use. Non-bleeder, siphon feed with external
This innovative air gun acts as a handy air broom to sweep away
mix. Operates on 40 to 85 psi at 5 to 12 CFM.
debris from unwanted areas such as wing surfaces, cowlings, wheel
Includes 1 quart cup.
skirts, cockpit areas, and anywhere else you need an extended
reach. The multi-port design delivers air uniformly along the length
of the wand, so that you can sweep away debris in one pass.

8050........................................ (12”)....................................$26.95 366Z2................................(Choice Tool).............................$55.95

8051........................................ (24”)....................................$30.95 19418..................................... (Titan)...................................$26.95
8052........................................ (36”)....................................$37.95
8053........................................ (48”)....................................$44.95
SPRAY WAND ENGINE CLEANER
RIGHT ANGLE FUNNEL

10” Tall Translucent Funnel with a 6-3/4” Offset from Center of Mouth Connect to any air source. Sprays solvents or any cleaning solution.
to Center of Spout for Hard-to-Reach Applications. The funnel mouth Complete with siphon hose.
is 3.5” O.D. and the spout is .7” O.D. 37CB...................................................................................$24.95
17232....................................................................................$8.95

FLUID DRAIN PAN BLOW GUN

Meets OSHA standards as to maxi-

mum PSI and noise level.

D420.....................................................................................$6.95

SPOT SPRAY NON-AEROSOL SPRAYER

These eco-friendly sprayers

are refillable and eliminate
This rectangular drain collector is designed to fit perfectly onto a stan- dangerous, harmful propel-
dard IBC tote, or any other similar storage container (not included). lants. 80-150 psi operat-
The extra-wide 14” width will accommodate anything from small oil ing pressure. Refillable and
filters to large cans and pails. The length extends to the edge of the not for use with paint prod-
tote with little or no overhang, thus providing a maximum work area ucts. Eliminates dangerous,
without the risk of accidentally knocking the funnel out of place. It harmful propellants. Maxi-
comes with a catch screen to support small containers and filters as mum capacity 32 oz.
they drain, and the 3” diameter drain spout reduces the chance of 19419...................................... (Red)....................................$26.95
clogging this funnel while draining thick or heavy liquids. 19424......................................(Blue)....................................$26.95
BFN1....................................................................................$89.95 19421.................................(Red & Blue)..............................$49.95

154 800-248-0638 AIRCRAFT TOOL SUPPLY www.aircraft-tool.com

 SHOP EQUIPMENT
HEAT GUN W/ ACCESSORIES DUAL WALL HEAT SHRINK TUBE

45239 45238
Weatherproof heat shrink tubing offers waterproof protection and
insulation on solder connections and components. This tubing fea-
tures an adhesive-lined inner wall to seal out moisture.
General purpose heat gun deliver airflow and has 28mm diameter 45239.................... (106 pc Kit 3:1 Shrink Ratio)...................$29.95
nozzle. Well balanced and lightweight body; temperature setting at 45238.................... (171 pc Kit 2:1 Shrink Ratio)...................$15.95
380 C. Double insulated with an impact resistant heating element
make the heat gun ideal for industrial applications. Features: 28mm
Diameter nozzle Temperature setting at 380 C 20 degree Celsius
Advanced motor housing design with improved heat dissipation 4” HEAT SHRINK TUBES
SS-611A...............................................................................$58.95
• 1/16 in. 60 pieces
• 3/32 in. 35 pieces
HEAT GUN • 1/8 in. 20 pieces
• 3/6 in. 10 pieces
• 1/4 in. 10 pieces
This is a high performance, hot
• 3/8 in. 10 pieces
air source that delivers concen-
trated, heated air to the job.
Has two heat selections: 750°F
Used for electrical insulation, bundling and wire identification pur-
and 1,000°F. Only weighs 1/2
poses. Slides easily over small inline splices and connectors. Can
pound. Operates on 120 volts,
shrink down to 50% of its original diameter to fit snugly over any wire,
10 amps, 1,200 watts. Contains
hose or cable. Ideal way to terminate ends of Braided Sleeves, cre-
no asbestos. UL listed. Three
ating a tight, professional finish.
special nozzles available for
easy attachments included in E902-460............................. (Colored).................................$13.95
the accessory kit. E902-355............................... (Black)...................................$10.95

22400.................................................................................. $17.95

PROPANE HEAT GUN

FURNO HEAT GUN

The Furno Dual Temperature

Heat Gun is a versatile tool for
dozens of applications. The
broad temperature range
makes it ideal for a variety of
projects, it is ideal for forming
and bending plastic, loosening This propane heat gun is perfect for use with wiring and paint re-
rusted bolts. moval projects. Its high temperature range makes it a great tool for
thawing frozen pipes and bending plastics. The heat gun connects
to disposable propane cylinders that are widely available. In addi-
tion to the heat gun itself, this offer includes a hands free vertical
0503059.........................(750° F - 1100° F)...........................$26.95 stand, a spreader nozzle and a deflector nozzle. This product does
0503063.........................(150° F - 1200° F)...........................$41.95 not include a propane cylinder.
0503070.........................(125° F - 1300° F)...........................$62.95 51886..................................................................................$75.95

800-248-0638 AIRCRAFT TOOL SUPPLY www.aircraft-tool.com 155

 SHOP EQUIPMENT
GRYPMAT MUTI-POSITION MAGNETIC NUT CUP

Features a strong magnetic base that attaches securely to vehi-

cles, tool Boxes, bins, hoists and any other ferrous metal objects.
No more worrying about tools sliding out of reach, the GrypMat is The magnet has a coating to protect work surfaces and is oil and
made from high quality polymers, making it non-slip, non-marring, fuel resistant. Angled cup design allows it to be positioned vertically,
and anti-static. The surfaces we work on can be curved, angular, or horizontally, or any angle in between.
slick, giving tools plenty of opportunity to get away. Sliding or falling
67300..................................................................................$15.95
tools create a hazard for both personnel and equipment. Using the
GrypMat will reduce these hazards.
GRYP-T......................................All 3................................... $129.95 COLLAPSIBLE RUBBER MAGNETIC PARTS TRAY
GRYP-S.....................................Small....................................$29.95
Perfect for holding small parts, hard-
GRYP-M................................ Medium.................................$44.95 ware and fasteners in place. Sticks
GRYP-L.....................................Large...................................$69.95 to any ferrous metal surface. Rubber
covered prevents scratching .

LOCKING AIR TOOL HOLDER

21266....................................................................................$6.95

11” MAGNETIC STRAINER

This locking air tool holders allow you to organize your valuable
pneumatic tools and keep them from falling off by locking them This anti-rust stainless steel strainer is perfect for washing dirty tools.
up. The 10 in. wide, powdercoated steel racks have five slots that It is also great for collecting small metal items such as bolts, nails,
hold most popular quick-connect fittings. screws and fasteners. The rubber coated magnet prevents scuffing
and scratching surfaces.
49960..................................................................................$20.95
11180..................................................................................$13.95

MAGNETIC PARTS TRAY

PLIERS AND WRENCH RACK

21265 21263

Magnetic Parts Tray perfect for

Cut the clutter in your toolbox with these handy wrench racks! Con- holding parts, hardware and fas-
structed from durable plastic, these racks feature two different slot teners in place. Sticks to any fer-
sizes to accommodate up to 13 tools. Indentations on the front 21260T rous metal surface - even works
edge of the wrench racks hold your tools upright, making it easy to upside-down.
find the wrench or pliers you’re looking for. 21265..............................(5-3/8” x 9-3/8”)..............................$6.95
40460..................................... Black....................................$15.95 21263................................. (6.5” x 14”)...............................$15.95
40490.......................................Red..................................... $15.95 21260T................................. (Set of 3).................................$11.95

156 800-248-0638 AIRCRAFT TOOL SUPPLY www.aircraft-tool.com

 SHOP EQUIPMENT
MULTI-PURPOSE ORGANIZER HOMAK® 22” CANTILEVER TOOLBOX

Individual compartments are perfect for storing small parts, hard-

ware and other supplies. View your contents easily with the clear Manufactured from heavy duty 16 gauge steel, double-welded,
plastic, hinged lid.. coated with two layers of hard enamel for unbelievable durability.
21267............................ 4 Compartments............................$4.95 Great cantilever design gets maximum storage while making it easy
21268............................ 9 Compartments............................$8.95 to get to any tool you want. You’ll like the way it opens to see all your
tools at a glance. Moveable/Removable partitions and divider set
permit you to create 6 compartments in two trays. 22-1/2” Width,
MULTI-PURPOSE 12 DRAWER ORGANIZER 11” Depth, 12-5/8” Height, with 6 Trays .
KMC-1022......................................................................... $121.95
This organizer has the ability to mount to
a wall or stand alone on a bench. It fea-
tures 8 small drawers and 4 large drawers MILITARY “G.I.” CANVAS TOOL BAG
making it great for storing and organizing
small parts, hardware and accessories. This heavy duty canvas bag is
21269......................................... $15.95 perfect for toting tools around in
the field. It contains ample space
for a rivet gun, bucking bars, and
plenty of pouch space for acces-
sories. Opens easily with sturdy
MAGNETIC TOOL HOLDER brass zipper.

CB21-11.................................. (11”)....................................$16.95
CB21-17.................................. (17”)....................................$24.95

HIP ROOF TOOLBOX

General purpose, sturdy

Magnetic tool holders are ideal for your home, shop, or garage.
co-polymer construction,
These magnetic tool holders are powerful enough to hold even
large partitioned tote tray.
heavy hand tools. It provides compact wall storage for your most
Large nickel-plated steel
frequently used tools.
draw-bolts. Lockable pad-
21300...................................... (13”)....................................$21.95 lock eye. 19”W x 9-1/4”H x
21400...................................... (24”)....................................$31.95 10”D.
19000..................................................................................$25.95
MULTI-ANGLE SWIVEL VISE
This Multi-Angle Swivel Action Vise is TOOL BOX DRAWER LINER
light weight, durable, and features an
aluminum die cast construction for du-
rability. Designed to swivel 360 degrees These versatile rubber mesh lin-
and tilt 90 degrees, this vise will assist ers keep your tools and other
you at any angle. It come complete items from sliding around.
with a 2” metal jaw that opens fully to 2 They’re durable, washable, and
½”. The triangular base vacuum mea- can be easily cut with scissors to
sures in at 6 ¼”. fit your toolbox and/or drawers.
E902-117.................................(Vise)....................................$45.95
E902-117J...................(Replacement Jaws)..........................$2.15 30931....................................................................................$5.95

800-248-0638 AIRCRAFT TOOL SUPPLY www.aircraft-tool.com 157

 POWER TOOLS
ATS 3/8” MICRO AIR RATCHET ATS ADJUSTABLE CLUTCH AIR SCREWDRIVER

A powerful, direct drive screwdriver with a

Mighty-mite air ratchet only 4-1/2” small, but delivers up to 20 ft-lb positive control clutch system that delivers
(27 Nm) of torque to handle even the most stubborn nut or screw. high torque when you need it, but can be
3/8” driver features a built-in 1/4” hex receptacle so you can use it as adjusted down to prevent stripping of even
a ratchet wrench, or as a screwdriver. Great dual-purpose tool. 260 the smallest screw heads.
rpm, Handle exhaust, 1/4” NPT air inlet, 90 psi max. • Internal Adjustable Cushion Clutch • 1/4” Hex Drive
ATS3031..............................................................................$85.95 • 8-1/2” (216 mm) Overall Length • 800 RPM
• 45-115 in-lb (5-16 Nm) Torque • 2.64 lbs (1.2 kg) Weight
ATS6203............................................................................ $119.95
ATS STUBBY RATCHET

ATS STRAIGHT AIR SCREWDRIVER

Stubby air ratchet is only 6” long, but delivers enough torque to tight-
en or loosen the toughest bolts and nuts. Ergonomic design makes
it very comfortable in the hand.
• 240 RPM Free Speed • 30 ft-lb (40 Nm) torque Has all the same features as our ATS6203 Pistol Grip Screwdriver in a
• 6-1/2” long • Front exhaust straight form that allows you to use it in tight areas that would other-
ATS3003............................. (1/4” Drive)...............................$85.95 wise be unreachable.
ATS3004............................. (3/8” Drive)...............................$85.95 • Internal Adjustable Clutch • 1/4” Hex Drive
• 10-3/8” (265 mm) OAL • 1,800 RPM
• 45-115 in-lb (5-13 Nm) Torque • 2.55 lbs (1.16 kg) Weight
ATS HIGH SPEED CUT-OFF TOOL ATS6212............................................................................ $135.95

SWIVEL BIT HOLDER

Perfect for cutting and trimming studs and bolts. Features a safety
hood to protect against flying debris. 3” (75 mm) disc capacity, 3/8” 1/4” hex shank. 30 degree swiveling head. Locks into stationary posi-
(15 mm) mount. Free speed 20,000 RPM. Weight 1.74 lbs (.79 kg). tion as desired.
ATS8502..............................................................................$49.95 16227....................................................................................$9.95

158 800-248-0638 AIRCRAFT TOOL SUPPLY www.aircraft-tool.com

 HAND TOOLS
SCREW-GRAB® SCREW AND BOLT REMOVER
“A very high quality
Just a drop of Screw Grab® placed onto the head must have tool. Paid for
of a stripped screw or rounded bolt will increase the itself the first time I used
torque by up to 400% and allow you to easily tighten it on a stuck screw. Wish
I would have bought one
or remove them. The special emulsion will not stain or 30 years ago.” ~ G.W
react chemically.
Fits all rivet guns with a .401 shank and is held with a retaining spring.
SG94.....................................................................................$6.95
3/8” square drive end. Used to remove screws, bolts, nuts, etc. that
are corroded or cannot be loosened by conventional methods.
AT540A.............................(10” Standard)............................$20.95
AT540B............................... (6” Stubby)...............................$21.95
ALDEN GRABIT-PRO® BROKEN BOLT AND DAMAGED
AT54K................................ (Adapter Kit)..............................$11.95
SCREW REMOVER

Works on damaged screws and broken

bolts from as small as 4 screw to as SMALL FASTENER REMOVER
large as a 3/8” bolt. It easily removes
most damaged screw types such as
Hex, Phillips, Torx, and Square Drive from
wood, plastic or metal up to 3 inches
in length. Two-step drill bit and extrac-
tor in one tool extracts broken bolts and
damaged screws fast; use in reverse
only when drilling and extracting with
reversible hand held power drill. For use with a Pneumatic Impact Tool to Loosen Rusted or Seized
Fasteners. A 3/4” open end wrench can be used to turn the socket
REMOVES SIZES
while impacting the fastener. A locking pin in the driver keeps the bit
PART QTY AN METRIC PRICE
AN/SAE BOLT holder in place on the square drive for safe operation.
SCREW BOLT
60530..................................................................................$29.95
8401P 1 ea. 4-7 10 M5 $9.95
8402P 1 ea. 6 - 10 1/4” M6 $9.95
8403P 1 ea. 12 - 14 5/16” M8 $9.95 SCREW EXTRACTOR SET
8404P 1.ea. 16 - 24 3/8” M10 $10.95
8440P 4pc Kit 4 - 24 10 - 3/8” M5 - M10 $26.95 Five piece extractor set designed
8430P 3pc Kit 4 - 14 10 - 5/16” M5 - M8 $19.95 to remove broken screws and bolts.
8420P 2pc Kit 4 - 10 10 - 1/4” M5 - M6 $15.95 Easy to use, just drill a pilot hole, insert
the extractor and twist out the screw.
Set includes sizes: 1 for sizes 3/32” -
5/32”, 2 for sizes 5/32” - 7/32”, 3 for
sizes 7/32” - 9/32”. 4 for sizes 9/32” -
ALDEN DRILL-OUT® BROKEN BOLT EXTRACTOR 3/8”, 5 for sizes 3/8” - 5/8”.
S35P....................................................................................$11.95

Drill-out is a drill-bit and extractor in

one tool. It drills into broken bolts on STUCK BOLT, NUT, AND STUD REMOVER SET
center and extracts them cleanly
using the power of the drill. Simply
chuck the self-centering bit, set your
drill to reverse, and drill at medium
speed to extract the bolt. Drills up
to grade 8 and 10.9 class fasteners
with no pilot hole required. Made
from M2 HSS in the USA.
The 6 piece set removes standard and metric bolts, nuts and studs
REMOVES SIZES
PART QTY PRICE from 1/4” to 9/16” (6mm to 14mm).
AN/SAE BOLT METRIC BOLT Drive the proper size remover over the bolt head, nut or stud. The
4017P 4pc Kit 1/4” - 1/2” M6 - M12 $48.95 remover spline cuts into the bolt head or threads for a sure grip.
7017P 7pc Kit 5 - 1/2” M3 - M12 $60.95 19250..................................................................................$38.95

800-248-0638 AIRCRAFT TOOL SUPPLY www.aircraft-tool.com 159

 HAND TOOLS

GEARWRENCH® AVIATION TOOLKIT

GearWrench specifically designed this kit with the A&P student in mind. It’s part of their
Technical Education Program (TEP) series aimed at making top quality GearWrench
tools affordable for students. The kit contains the basic hand tools required by most cur-
riculums and is, in fact, the recommended kit of many A&P schools across the country.
All tools are of the highest quality, and backed by the GearWrench Lifetime Warranty.

1/4” DRIVE TOOLS 3/8” DRIVE TOOLS SCREWDRIVERS & PLIERS

10 piece 12-point Set 13 piece 12-pt set 6 Pc. Screwdriver Set
3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 1/8x3” Slotted, 1/4 x 4” Slotted,
3/8, 7/16, 1/2, 9/16 11/16, 3/4, 13/16, 7/8, 15/16, 1” 5/16” x 6 Slotted, 3/8” x 8” Slotted,
1 x 3” Phillips, 2 x 4” Phillips
10 piece 12-point deep Set 11 piece 12-pt deep set
3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 4 Pc Mixed Pliers Set
3/8, 7/16, 1/2, 9/16 11/16, 3/4, 13/16, 7/8 9.5” Tongue & Groove, 7” Diago-
nal Cutters, 8” Long Nose, 8” Slip
1/4” Drivers 3/8” Drivers
Joint
Full Polish Teardrop Ratchet, 3” Full Polish Teardrop Ratchet, 6”
extension, 6” Extension, Universal Extension, Speed Handle, Univer-
Joint sal Joint

COMBINATION WRENCHES GENERAL PURPOSE TOOLS SPECIALTY TOOLS

15 pc Long Combination Set Safety Goggles, Hearing Protec- 23” Pickup Tool, Telescoping Mir-
1/4, 9/32, 5/16, 11/32, 3/8, 7/16, tion ror, Telescoping Magnet, Screw
1/2, 9/16, 5/8, 11/16, 3/4, 13/16, Starters, 1-1/4” Putty Knife, Scribe,
7/8, 15/16, 1” Crimper, Tool Box

83080......................................................... (Complete Kit)........................... $772.95

GEARWRENCH® OPEN END RATCHETING WRENCH SAE X-BEAM FLEX HEAD COMBINATION
RATCHETING WRENCH SET
Ratcheting head

The open end actually ratchets! No need to reposition with every

stroke, both box end and open end are ratcheting. 7 piece set in
sizes: 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, and 3/4.
85599..................................................................................$90.95
GearWrench 9-Piece XL X-beam flex ratcheting wrench set consists
of one each: 5/16”, 11/32”, 3/8”, 7/16”, 1/2”, 9/16”, 5/8”, 11/16”, and
a 3/4” wrenches. Ratcheting box end needs as little as 5 degrees
CROWSFOOT WRENCH SET to move a fastener vs 30 degrees for standard box end wrenches.
Surface drive design reduces fastener rounding. Flexible head on
A set of 3/8” drive wrenches box end of wrench provides for multiple angles for better clear-
commonly used with torque ances in tight spaces. Open end of wrench features gear wrench
wrenches. Sizes: 3/8”, 7/16”, surface drive, which reduces founding of fasteners and delivers
1/2”, 9/16”, 5/8”, 11/16”, 3/4”, 25 Percent more torque. Long pattern X-beam design provides for
13/16” and 7/8”. Drop forged. greatly increased torque and reduced hand fatigue. High polish
Full polish, high chrome finish. nickel chrome finish and blow molded tray for storage.
85298................................................................................ $186.95
81908..................................................................................$79.95 85398................................. (Reversible).............................$174.95

160 800-248-0638 AIRCRAFT TOOL SUPPLY www.aircraft-tool.com

 HAND TOOLS
RATCHETING BREAKER BAR 14 PIECE COMBINATION
NON-RATCHETING WRENCH
SET SAE

Includes sizes:
This heavy duty breaker bar has a 3-way ratchet mechanism, • 1/4” • 5/8”
chrome plated bar, black-oxide head, chrome vanadium steel • 5/16” • 11/16”
construction, and a maximum torque of 148 ft/lbs (20 kg/m). • 11/32” • 3/4”
12015.........................(3/8” Drive x 15” Long)......................$29.95 • 3/8” • 13/16”
12018.........................(1/2” Drive x 18” Long)......................$32.95 • 7/16” • 7/8”
12019T.......................(3/8” Drive x 18” Long)......................$19.95 • 1/2” • 15/16”
• 9/16” • 1”
12024.........................(1/2” Drive x 24” Long)......................$36.95
12047.........................(1/2” Drive x 30” Long)......................$27.95
12048.........................(3/4” Drive x 40” Long)......................$72.95 GearWrench’s 81924 14-Piece SAE Full Polish Combination Non-
12049.......................... (1” Drive x 40” Long)........................$82.95 Ratcheting Wrench Set offers wide ranging versatility in one con-
venient package. The wrenches feature full-polish nickel chrome
plating construction for corrosion-resistant, long-lasting wear. Sur-
face Drive Plus technology on open end provides a stronger grip,
reduces fastener rounding, and offers increased torque. The offset
CRESCENT® “FORD” WRENCH box end for increased accessibility in hard-to-reach areas.
81924..................................................................................$99.95

GEARWRENCH® ROTO RATCHET SET

The original Crescent Wrench (aka Monkey Wrench, Ford Wrench,

Spud Wrench). Tool of choice for removing and installing “B” nuts.
Smooth jaws.
C79H........................................ (9”)..................................... $34.95
C711H..................................... (11”)....................................$40.95
C715....................................... (15”)....................................$69.95 Head rotates
C718....................................... (18”)....................................$90.95 180 Degrees

The ratchet head rotates and operates a full 180° to work in con-
fined areas. 72 teeth ratchet requires less than 5° to actuate. Set of
1/4” and 3/8” drives.
GEARWRENCH® STUBBY FLEX COMBO RATCHET SET 81223....................(Set of 1/4” and 3/8” Drivers)..................$73.95

ROUND SWIVEL-HEAD RATCHETS

Small enough to fit in the palm of your hand, but provides enough
leverage to tighten or loosen even the most stubborn nut. Features Unique swivel head design for confined areas. 72 tooth ratchet
a ratcheting box end with a flex head to ensure access with tight mechanism. Chrome moly steel construction.
areas. 7 piece set in sizes: 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, and 3/4. 11066............................ (1/4” Drive 5-1/2”)..........................$16.95
9570................................... (Flex Head)............................. $142.95 11067............................ (3/8” Drive 5-3/4”)..........................$17.95
9507..................................... (Straight).................................$90.95 11076............................ (3/8” Drive 8-3/4”)..........................$23.95

800-248-0638 AIRCRAFT TOOL SUPPLY www.aircraft-tool.com 161

 HAND TOOLS
PRECISION DIAL TORQUE WRENCHES MICROMETER TORQUE WRENCH

Precision torque wrenches are accurate to within +/- 2%. The drive
head is a sealed teardrop design that provide ease of access,
strength, and keeps out contaminants. The drive reverses direction
at the flick of a level, and the micrometer twist lock securely holds
your torque settings even under heavy use.

PART RANGE GRAD DRIVE PRICE

Sturdy body construction ensures maximum durability with easy to
85060 30-200 in-Lbs 1 in-lb 1/4” $145.95
read laser marked single scale. Large, easy to read dial is shock re-
85061 30-250 in-lb 1 in-lb 3/8” $129.95
sistant and protected by a tough metal guard. The memory needle
retains highest torque reading applied. Calibrated in both CW and
CCW directions, with accuracy +/- 2%, from 2-100% of full scale.
Individually serialized with matching certificate of calibration trace-
able to N.I.S.T. PRECISION TORQUE SCREWDRIVERS

PART RANGE DRIVE GRAD PRICE

KL45-751 0-75 in-lb 1/4” 1 in-lb $268.95
KL45-3002 0-300 In-Lb 3/8” 5 in-lb $262.95
KL45-502 0-50 ft-lb 3/8” 1 ft-lb $256.95
KL45-1003 0-100 ft-lb 1/2” 2 ft-lb $310.95
KL45-2503 0-250 ft-lb 1/2” 5 ft-lb $310.95

Positive locking pull down adjustment knob with automatic lock in

counterclockwise direction. 1/4” hex bit holder with a cam-over
GEARWRENCH® ELECTRONIC TORQUE WRENCH torque limiting clutch. The easy to read window scale is accurate to
+/- 6% clockwise direction and from 20-100% of full scale.

PART RANGE GRAD PRICE

KL45-61SM 20-100 in-oz 1 in-oz $272.95
KL45-151SM 3-15 in-Lbs .2 in-lbs $248.95
KL45-401SM 5-40 In-lbs .5 in-lbs $309.95

REVERSIBLE TORQUE WRENCH

Digital precision guarantees exact torque settings by beeping when

the desired torque (or angle) is reached. Accurate to +/- 2% CW
and 3% CCW from 20% to Full Scale. Also measures angular torque This torque wrench features a reversible head design that allows you
to an accuracy of +/- 1%. Thin profile head features backlit LCD to accurately torque both left and right hand fasteners. This wrench
display that can be clearly read, even in poor lighting. has an easy-to-read analog scale window for setting torque values
in ft-lbs and Newton-meters. With a fully heat-treated handle this is
PART RANGE DRIVE HEAD PRICE
one tough and durable wrench and it meets ANSI specifications.
85070 10-100 ft-Lbs 3/8” Straight $300.95
23150............................(1/2” 20-150 ft lbs).........................$79.95
85071 25-250 ft-lb 1/2” Straight $332.95
23151............................(1/2” 50-250 ft lbs).........................$90.95

162 800-248-0638 AIRCRAFT TOOL SUPPLY www.aircraft-tool.com

 HAND TOOLS
3” MINI RATCHET AND BIT HOLDER DRIVE PIN PUNCHES

A two-in-one ratchet featuring one side that holds hex bits is a per-
fect addition to your toolbox. The compact handle is ideal for con-
fined areas. Chrome vanadium steel finish.
12101......................................(1/4”)....................................$11.95
A set of hardened pin punches uniformly heat treated and center-
12102......................................(3/8”)....................................$12.95 less ground. Each set contains one each of the following diameters:
12103......................................(1/2”)....................................$13.95 1/16”, 3/32”, 1/8”, 5/32”, 3/16”, 7/32”, 1/4”, and 5/16”.
SPC75........................ (Sdandard 4” 8pc Set)......................$31.95
SPC76........................ (Extra Long 8” 5pc Set)......................$27.95

COMBINATION DUAL-HEAD OFFSET RATCHETS BRASS HAMMERS

Non-sparking brass hammers are ideal for working in volatile spaces.

B2............................................ (1 lb)....................................$34.95
FLEX HEAD B4........................................... (2 lbs)...................................$49.95

DEAD BLOW HAMMERS

This 72 tooth ratchet mechanism engages with just 5 degrees of
sweep for work in the tightest places. Contoured cushion with a grip
handle for comfort and strength.
12052................................. (1/4 & 3/8”)...............................$14.95
12053................................. (3/8 & 1/2”) ..............................$16.95
12357........................ (1/4” & 3/8” Flex Head)......................$15.95
12358........................ (3/8” & 1/2” Flex Head)......................$17.95
Soft-faced dead blow hammers deliver a solid blow without recoil or
11050.................. (1/4” & 3/8” Stubby Flex Head)................$13.95 excessive shock. Great for hard pounding.
12051.................. (3/8” & 1/2” Stubby Flex Head)................$18.95
CH1....................................... (1-1/2”)..................................$19.95
CH3.......................................... (2”).....................................$26.95
CH5....................................... (2-1/2”)..................................$36.95

FINGER RATCHETS ADJUSTABLE VISE GRIP WRENCH

Buy them individually or in a set,

these finger ratchets have a
contoured grip for comfort and
power during every job. They offer
a reversible ratchet mechanism.
Designed specifically to reach IRWIN® VISE-GRIP® Adjustable Wrench provides the leverage you
confined spaces. need for powerful tightening and loosening applications. Its Pro-
12090......................................(1/4”)......................................$6.95 Touch™ handle cushions your hand for fatigue-free operation.
12091......................................(3/8”)......................................$7.95 2078606................................... (6”).....................................$13.95
12092......................................(1/2”)......................................$7.95 2078608................................... (8”).....................................$15.95

800-248-0638 AIRCRAFT TOOL SUPPLY www.aircraft-tool.com 163

 HAND TOOLS
QUAD RATIO DRIVER (4:1 RATIO) 18” 12PC RATCHETING SCREWDRIVER

If you spend a lot of time installing and removing screws then the
Ratio Driver will speed up your work by a factor of four. The geared
drive mechanism ratchets the nosepiece 4 times for each turn of
the handle; and the ratchet direction can be reversed with a quick
flick of a switch. It accepts any ¼” drive bits and includes an assort- 18in. ratcheting driver with 10 bit choices and 250 in.-lbs. of torque
ment of 8 bits in the handle compartment. The included bits are: gives you fastening capabilities like no other handheld driver. This
Hex 3/32”, 1/8”, 5/32”, 3/16”; Torx 15, 20, 25, 30; Phillips 0, 1, 2, 3; screwdriver is extremely useful especially in hard-to-reach areas.
Slot 1/4”, 3/16”; Roberts (square) 2, 3. Lifetime warranty.
12218..................................................................................$19.95
SAB710................................................................................ $29.95

JEWELER’S SCREWDRIVER
BIT SET
Nickel plated body with screw chuck. Kit
contains three size flat blades, one Phillips
blade and one scratch awl. Comes in a
fitted vinyl case.

SPC606..................................................................................$6.95

10PC MICRO FLEX BIT DRIVER 16251 16148

These master bit sets should cover it all! Set includes: Phillips, Met-
ric and SAE Hex, Star and Slotted bits Includes convenient storage
case.
16251.......................(50 Piece Impact Bit Set).....................$58.95
16148........................(148 Piece Security Set).....................$45.95

At only 3-1/2” long this little ratcheting bit driver is the perfect tool for
those tight spaces where a drill or screwdriver just won’t fit. The Micro
Bit Driver accepts any standard 1/4” hex-drive bit, and includes 8
driver bits of its own. The ratcheting mechanism is extremely fine so it RATCHETING PRECISION SCREWDRIVER
can be used even in confined spaces where the handle arc is very
short. Offset handle also aids access to obstructed spaces.
11212..................................................................................$18.95

PRECISION SCREWDRIVER SET

A set of quality precision screw-
drivers perfect for working on ra-
dios, electrical circuits, and other With its ergonomic handle and smooth ratcheting action, you’ll find
delicate instruments. They have a
patented, ergonomic handle for yourself reaching for this precision screwdriver set again and again.
greater comfort, and a swivel head It’s ideal for precision tasks where there is a risk of stripping or break-
offers rapid rotation. The set in- age, such as with brass fasteners, soft woods or electronic applica-
cludes each of the following screw- tions. The set includes a 4-1/2’’ extension bar for reaching into tight
drivers: 00-CP, 0-CP, 1-CP, 3/32”-Flat, spaces, and two dozen 1’’ driver bits: (7) Phillips, (5) Slotted, (5) SAE
and 1/8”-Flat.
Hex, (5) Star and (2) Tri-wing.
700......................................................................................$16.95 16092....................................................................................$9.95

164 800-248-0638 AIRCRAFT TOOL SUPPLY www.aircraft-tool.com

 HAND TOOLS
SPEED HANDLE APEX BIT HOLDERS

Heavy duty drop forged bit holders

will not break under heavy driving
Fully polished Chrome Vanadium steel. force. Works with all types of Flat,
10-935............................... (1/4” Drive)...............................$35.95 Phillips, Tri-Wing, and Torq insert bits. 93817 93813
11-935............................... (3/8” Drive)...............................$39.95 93813................... (1/4” Hex Holder x 3/8” Drive)...................$6.95
12-935............................... (1/2” Drive)...............................$49.95 93815.................. (5/16” Hex Holder x 3/8” Drive)..................$6.95
93817.................. (5/16” Hex Holder x 1/2” Drive)..................$6.95

THREADED HEX BIT ADAPTER

PHILLIPS® AVIATION APEX BITS

Genuine Phillips Tri-Wing® and Torq-

Set® bits are drop forged for optimum
toughness and resistance to wear. Each
bit is 1” long and has a ¼” hex shank.

TRI-WING TORQ-SET

POINT TRI-WING® TORQ-SET®

The Nova Threaded Bit Adapter lets you use your hex shank insert
bits with any 1/4-28 threaded tool. Perfect for close quarters ap- SIZE PART PRICE PART PRICE
plications. 0 - - TQ0 $1.95
PA28-450............................................................................... $3.95 1 TW1 $3.95 TQ1 $1.95
2 TW2 $3.95 TQ2 $1.95
3 TW3 $3.95 TQ3 $1.95
4 TW4 $3.95 TQ4 $1.95
SCREW STARTERS 5 TW5 $3.95 TQ5 $1.95
6 TW6 $3.95 TQ6 $1.95
8082 7 TW7 $3.95 - -
8 - - TQ8 $1.95
8083
10 - - TQ10 $1.95
For starting screws in inaccessible areas.

PART DESCRIPTION PRICE

8082 Slotted screw starter 3/64” - 7/6” screws $9.95
8083 Phillips screw starter 6 - 1/4” screws $8.95 TORQ-SET HEX POWER BIT

CABLE TIE FASTENING TOOL TORQ-SET

Common fastener type in aviation and electronics industry.

Military style cable tie gun is
PART DESC OAL PRICE
made of solid metal for durabil-
ity and features precise tension- TH0 #0 1-1/4” $1.95
ing controls. Can be used with TH1 #1 1-1/4” $1.95
a wide variety of cable ties and
TH2 #2 1-1/4” $1.95
features an automatic cut off to
flush cut the ties when the cor- TH3 #3 1-1/4” $1.95
rect tension is achieved. TH4 #4 1-1/4” $1.95
CP-383.................................. (Metal)...................................$69.95 TH5 #5 1-1/4” $1.95
E900-005...................... (Economy Tie Gun).........................$29.95
TH6 #6 1-1/4” $1.95
ELB721.............................. (Mini Tie Gun)...............................$7.95
TH8 #8 1-1/4” $1.95
NT1........... (Cable Tie 3/4” Max. Diameter, 4-1/2” Long).......$7.95
NT2............. (Cable Tie 2” Max. Diameter, 7-1/2” Long).........$7.95 TH10 #10 1-1/4” $1.95

800-248-0638 AIRCRAFT TOOL SUPPLY www.aircraft-tool.com 165

 HAND TOOLS
PRECISION TAP AND DIE SETS TAP AND DRILL SET

24606 24614 These drill and tap combinations produce a thread that is strong
and easy to tap 135° split point HSS drill bits ensure fast, precise
Precision machined to exacting standards, then Tempered-Tuff to drilling High carbon steel plug taps are ideal for general purpose
assure clean accurate threading. 24 piece set handles 1/4” to 1/2” threading Lock & Hardware Drill & Tap.
sizes. 41 piece set handles 1/4” to 1/2” along with 4 through 12 ma-
Plug Taps in sizes (4 - 40 NC, 6 - 32 NC, 8 - 32 NC, 10 -24 NC, 10 - 32
chine screw sizes.
NF, 1/4” - 20 NC)
PART PCS. RANGE PRICE Drill Bits in sizes (No. 43, No. 35, No. 29, No. 25, No. 21, No. 7)
24614 24 1/4” to 1/2” $104.95 80187..................................................................................$29.95
24606 41 1/4” to 1/2”, plus 4 to 12 $142.95

TAP WRENCH KIT THREAD REPAIR FILE SETS

T-Handle Tap Wrenches are designed for use with taps and many
Thread repair files help breathe life back into bolts, screws or fit-
other tools turned by hand. Adjust and tighten to size by twisting
tings that have been damaged due to cross-threading or corro-
knurled nut. Additional holding jaws are recessed inside the hole
sion. They restore damaged external threads on studs, bolts, screws,
for gripping onto smaller sized taps. T-handles can be extended to
etc. Made of high carbon steel, the Repair Files offer eight different
either direction for more leverage.
thread pitches. In addition, the Thread Repair Files can also be used
12000-KIT................... (#0-1/2” 2 wrenches)........................$13.95 as a screw pitch gage.
12001...................................(#0-1/4”)...................................$5.95 GT177-1........ (Threads 11,12,13,14,16,18,20,24 TPI)...........$10.95
12002................................ (#1/4”-1/2”).................................$7.95 GT177-2......... (Threads 9,10,12,16,20,27,28,32 TPI)............$10.95
GT177-8...(Threads 0.75,1.0,1.25,1.5,1.75,2.0,2.5 mm).....$10.95

EXTEND-A-LUBE™

Finally, an aerosol focusing tube FLEXIBLE EXTENSION BIT HOLDER

long enough to access those
hard-to-reach places and the
right product to keep you from
losing it! The 16” chemical re-
sistant tube is compatible with
virtually all aerosol nozzles and
ensures you will never drop your Flexible Extension Bit Holder with locking, magnetic, and quick re-
straw again! lease. Designed to flex and hold at various angle. 12x stronger mag-
net than standard bit holder. For use with hand or power tool driver.
EXAL-1...................................................................................$6.95 16004..................................................................................$19.95

166 800-248-0638 AIRCRAFT TOOL SUPPLY www.aircraft-tool.com

 HAND TOOLS
COTTER PIN PULLER WASHER WRENCH SET

Slip washers in place

with ease. Precision
cut from 301 full hard
stainless steel .042”
The Cotter Pin Puller helps you to easily and safely remove steel cot- thick. Fits most com-
ter pins from confined areas. The compound bend design facilitates monly used aircraft
use of the tool with either a pull or a twist motion. In addition, the size washers.
heavy duty screwdriver handle provides a familiar, comfortable grip.
GT64....................................(General)..................................$8.95
AE23800..............................................................................$41.95
15093..................................... (Titan).....................................$8.95

FASTENER HOLDER

COTTER PIN ASSORTMENT 555PC

This 555-piece cotter pin assort-

ment kits are quality replacements
for rusted, damaged, or missing This tool lightly grips fasteners for easier insertion into tight or blind
cotter pins. Kit contains a wide se- spots. No more dropped or lost parts.
lection of pin sizes to suit numerous AE5015..................................................................................$9.95
applications and is quite handy for
the shop, home, or toolbox. These
unique fasteners come in a re-
sealable plastic case for quick and
easy selection. BOLT GRIP
45205....................................................................................$6.95

SEAL AND O-RING REMOVER SET

These rounded tips allows
for easy removal of seals
and o-rings without dam- This tool lightly grips the heads of bolts and screws for easier inser-
aging the seal or the fin- tion into tight or blind spots. No more dropped or lost parts. Double
ished surface. Set includes ended -- one end for -3 (3/16”) fastener and one end for -4 (1/4”)
(2) Contoured Tips and (2) fastener. Bolt Grips are made from flexible stainless steel with an
Spoon Tips. Lengths are Overall Length of 12”.
5-1/2” and 8-1/2” AE5866................................................................................$23.95
17004..................................................................................$13.95

HANDEE CLAMP

407 PIECE SAE O-RING SET

The 407-piece O-ring assortment is

a comprehensive SAE sized set of
nitrile butadiene rubber (NBR) rub- The Handee Clamp will securely hold onto whatever you put in its
ber o-rings, perfect for personal jaws, enabling you to reach into that tight crevice so you can focus
use, or in professional workshops on the job at hand and not worry about dropping the hardware you
and garages. need. It also works great with those pesky Adel clamps that can be
difficult to hold down while securing the bolt.
NK407.................................................................................$16.95 HANDECLAMP-1...................................................................$19.95

800-248-0638 AIRCRAFT TOOL SUPPLY www.aircraft-tool.com 167

 HAND TOOLS
PLIERS VAMPLIERS SCREW REMOVING PLIERS

60778

11400

60774
Constructed from durable, long lasting, drop forged heat treated
high carbon alloy steel. Cushion grip handle for comfort. Easy to
use.

PART DESCRIPTION PRICE

The amazing new Vampliers doubles as a regular pair of pliers, as
60778 Hose Grip Pliers $9.95
well as a handy and effective screw remover. It uses a patented
11400 Pistol Grip Nose/Crimper Pliers $9.95
vertical and horizontal serration pattern to clamp onto screws (even
60774 Long Nose 90° Pliers $8.95
if they are completely stripped) and remove them. Of course, it can
also be used as a regular pair of pliers which features built-in wire
cutters and wire strippers.
VT001-KIT......................... (Complete Kit)........................... $129.95
DOUBLE X PLIERS VT001................................. (Standard)................................$34.95
VT001-5.................................. (Mini)....................................$29.95
VT001-8................................. (Pro 8”)...................................$49.95
VT001-7SJ......................... (7” Slip Joint)..............................$36.95
VT001-PCH........................ (Tool Pouch).................................$9.95

Designed with a compound joint that allows access with minimal

handle movement. Includes dual dipped grips for comfort and DOUBLE X SNAP RING PLIERS SET
aligned serrated tips for precision gripping.
82106.......... (2 Piece Set - Straight and Needle Nose)........$64.95
82005........................ (Straight Needle Nose)......................$34.95
82006............................(450 Needle Nose)..........................$34.95
82107.................... (3 Piece Hose Grip Plier Set)..................$95.95

Provides removal and installation of

hard to reach snap rings where side
TITANIUM HAND TOOLS to side access is restricted. Inter-
changeable tips sizes include .038
to .070 straight and 45 degree.
82110..................................................................................$69.95

SNAP RING PLIER SET

This cleverly designed combi-

nation snap ring pliers works to
install and remove both internal
18431 18627 18429
and external snap rings.
PART DESCRIPTION PRICE
18431 8” Titanium Bonded Needle Nose Pliers $19.95 E100-022............................. (Universal)................................$14.95
18627 8.25” Titanium Bonded Linesman Pliers $26.95 46000..............................(Inside/Outside)............................$14.95
18429 7” Titanium Bonded Side Cut Wire Cutter $25.95
18400............................... (Convertible)..............................$26.95

168 800-248-0638 AIRCRAFT TOOL SUPPLY www.aircraft-tool.com

 HAND TOOLS
NICHOLSON® DUAL “VIXEN” FILE SWISS PATTERN NEEDLE FILE SET

Our Swiss Pattern Needle File Sets

Fast cutting “curved tooth” file cuts through aluminum, brass, steel, have been designed to meet the
plastics, fiberglass, and composites without loading up. Features a needs of hobbyists, craftsmen,
coarse cutting surface on one side (10 TPI) for quick removal and a tool makers and jewelers. Every
smooth cut on the other side (16 TPI) for finishing. file is made from alloy steel and
machined into distinctive shapes
20547N................................... (12”)....................................$41.95
for various small scale and finish-
ing applications. 12 piece set.

NICHOLSON® MAGICUT™ PLASTIC FILES GT707475........................................................................... $23.95

NEEDLE FILE SET

A set of 6 precision files made to meet the exact-
Magicut files feature a pattern of narrow chip breakers created by ing standards of die makers, instrument makers,
steep and angled serrations for rapid removal of material with vir- jewelers, watchmakers, and other craftspeople.
tually no loading, even when working with soft plastics. Perfect for Each set contains 1 each of: Equaling, Half Round,
fiberglass, lexan, plexiglass, composites, and soft metals. Flat, Round, Square, and Three Square (Triangular)
PART DESCRIPTION PRICE Swiss Pattern Files. Comes packed in a durable vinyl
case. Overall length of each file is 5-1/2”.
07894 8” Flat $10.95
07917 10” Flat $12.95
S475..............................(Economy 12 pcs)..........................$20.95
07941 12” Flat $16.95
DIAMOND-COATED FILES

NICHOLSON® ALUMINUM FILES

Special double-cut teeth is designed specifically to quickly remove

aluminum without clogging. Can also be used for smoothing.

PART DESCRIPTION PRICE 8047 8042

Super-hard diamond coated round files will clean your smallest
00024 8” Flat $12.95
connectors like a pro.
00047 10” Flat $14.95
00070 12” Flat $20.95 8047..............................(Flexible Flat Files)..........................$29.95
8042.................................(Micro Round).............................$38.95
More products available online
FILE SET

NICHOLSON® FILE HANDLES

21528N 21474H
Designed to fit most popular files. Tapered to enhance push force.
21474H............................. (Ergonomic)................................$4.95
21528N............................... (Wooden)..................................$3.95

A set of 5 of the most commonly used files packaged together in

FILE CARD one kit for extra savings. Included are one each of: 8” triangular
bastard, 10” half-round bastard, 10” flat mill, 10” square bastard,
Used to clean and remove and 10” round (rat-tail) bastard. This set also includes file handles for
buildup from files. each file and a file card to keep them clean.
21455....................................................................................$8.95 FILE-KIT1..............................................................................$65.95

800-248-0638 AIRCRAFT TOOL SUPPLY www.aircraft-tool.com 169

 BOOKS AND SOFTWARE
FAA AC43.13 ACCEPTABLE METHODS, SKY RANCH ENGINEERING MANUAL
TECHNIQUES, AND PRACTICES John Schwaner authors one of the most
The FAA’s AC43.13 provides a wealth of definitive manuals on aircraft engine
information pertaining to the inspection maintenance we’ve ever seen. His book
and general maintenance of airplanes. In takes you from the basics up to the ar-
it, you’ll find charts and tables, identifica- cane art of engine diagnostics. He covers
tion and marking conventions; and main- factors such as lubrication, electrical is-
tenance standards. Compliance with the sues, mechanical alignment, heat related
standards set forth in AC43.13 is not op- problems, vibration and balance, etc. The
tional - it’s mandatory. chapter on troubleshooting alone is worth
AC4313............................................$26.95 it’s weight in gold.

SREM1.................................................................................$23.95

AVIATION MAINTENANCE TECHNICIAN SERIES

AIRCRAFT GAS TURBINE POWERPLANTS
The first book of Dale Crane’s AMT Series, Covers
the first section of the FAA’s required curriculum, The most up-to-date information on air-
an introduction to aviation along with basic craft gas turbine powerplants available.
lessons on mathematics, physics, and electric- New edition features over 450 pages
ity. Also addressed are regulations, mechanic and 500 illustrations.
privileges, forms, aircraft hardware and tools.

EA-TEP-2............................................$65.95
AMT-G3H..............................(General)................................ $59.95
ASA-8083-30...............(General Handbook)........................$39.95
AMT-STRUC-3H..................... (Structure)................................$49.95
AMT-P3.............................. (Powerplant)..............................$59.95

FAR/AIM FAR AERONAUTICAL INFORMATION MANUAL

Contains Titles 14 and 49 of the Code of Fed-

ESSENTIALS OF ADVANCED COMPOSITE eral Regulations (14 and 49 CFR) pertinent to
FABRICATION AND REPAIR General Aviation, Sport Pilots and Flight Instruc-
An excellent resource for beginners and profes- tors, combined with the Aeronautical Informa-
sionals alike. It teaches concepts and methods tion Manual (AIM) (includes Change 3, effec-
in a direct manner for a wide array of composites tive 8/25/2011).
including fiber and matrix selection, curing and
achieving desired properties, testing and inspec-
tion, with step-by-step instructions and trouble- FAR-AIM............................................$17.95
shooting.
ASA-COMPOSITE...............................$79.95

AVIATION MECHANIC HANDBOOK

Dale Crane’s handbook has been consid-

HELICOPTER MAINTENANCE ered “The Aviation Standard” for many years.
A core reference manual for mechanics,
Written in concise, simple language and packed aircraft owners, and pilots, it compiles specs
with photos and illustrations, this text explains the from reference books and government pubs
eight major helicopter types and how their sys- into a handy guide. Your single source for:
tems operate. Combined with its companion conversions, formulas, aircraft nomenclature,
study guide, this text provides “rotary-wing” ex- material/tool identifications, hardware sizes/
cellence. equivalents, and much more.

EA-HF-2............. (Textbook)................$35.95 ASA-MHB-6..........................................................................$16.95

170 800-248-0638 AIRCRAFT TOOL SUPPLY www.aircraft-tool.com

 BOOKS AND SOFTWARE
AVIATION LOGBOOKS AMT HANDBOOK: AIRFRAME

This FAA AMT Handbook—Airframe Volume 2 is

one of two volumes that replace and super-
sede Advisory Circular (AC) 65-15A. Complete-
ly revised and updated, this handbook reflects
current operating procedures, regulations, and
equipment.

ASA-8083-31V1...................(Volume 1)...............................$30.95
ASA-8083-31V2...................(Volume 2)...............................$30.95
These logbooks are designed to help keep your aircraft records in
order: inspections, tests, repairs, alterations, ADs, service bulletins,
and equipment additions, removals or exchanges can all be docu-
mented in accordance with FAA requirements.

PART DESCRIPTION PRICE AMT HANDBOOK: POWERPLANT

ASA-SP-L Propeller Logbook $4.95
ASA-SA-V2 Avionics Logbook $7.95
FAA handbook provides knowledge for earn-
ASA-SE-1 Soft Cover Engine Logbook $5.95
ing the Aviation Maintenance Technician cer-
ASA-SE-2 Hard Cover Engine Logbook $12.95
tificate, Powerplant section. The FAA General
ASA-SA-1 Soft Cover Aircraft Logbook $5.95
test questions are drawn from this book (FAA-
ASA-SA-2 Hard Cover Aircraft Logbook $12.95
H-8083-32).
ASA-SP-AMT AMT Logbook $19.95

ASA-8083-32.......................................................................$30.95
POCKET REFERENCE

• Do you stay up at night pondering what kind of

electrical plugs they use in Western Ethiopia?
• Are your semaphore skills a little rusty? 27 YEARS OF THE RVATOR
• And just how the heck do you tie a Crabber’s Eye
Knot, anyway?
Contains the complete collection of technical
articles, builder assist articles, flying techniques
If these and other such questions occupy your waking thoughts, then this articles, product evaluations, and safety and
is the book for you. The Pocket Reference is packed full of remarkably maintenance notices from Vans Aircraft from
useful information. Inside you’ll find tables for every conversion imagin- 1980 through 2006. 490 page paperback.
able; US and international standards; weights and properties of materi-
als, and much more. Get a copy of this book and you’ll never lack the
answer to life’s nagging questions again.
POCKETREF.......................................................................... $11.95 ATB9663BK...........................................................................$26.95

FAR/AIM FOR AVIATION MAINTENANCE TECHNICIANS AIRCRAFT STRUCTURAL TECHNICIAN

Contains Titles 14 and 49 of the Code of Fed- This book was written as an A&P college text-
eral Regulations (14 and 49 CFR) pertinent to book for an in-depth course on metal airframe
General Aviation, Sport Pilots and Flight Instruc- structures, but is also well suited and highly rec-
tors, combined with the Aeronautical Informa- ommended for builders of metal kitplanes such
tion Manual (AIM) (includes Change 3, effec- as the Van’s RV series.
tive 8/25/2011).

FAR-AMT...........................................$24.95 ATB0908.............................................................................. $32.95

800-248-0638 AIRCRAFT TOOL SUPPLY www.aircraft-tool.com 171

 ORDER FORM
AIRCRAFT TOOL SUPPLY For faster service...
• USA & Canada call 1-800-248-0638
P.O. Box 370
• International USA 1-989-739-1447
1000 Old U.S. 23 • Fax 1-989-739-1448
Oscoda, MI 48750-0370 USA • Order online www.aircraft-tool.com
ORDERED BY SHIP TO (IF DIFFERENT)
Name______________________________________________________ Name______________________________________________________
Company__________________________________________________ Company__________________________________________________
Address_____________________________________________________ Address_____________________________________________________
City________________________ State___________Zip______________ City________________________ State___________Zip______________
Country____________________ Phone__________________________ Country____________________ Phone__________________________
Email Address____________________________________________________________________________________________________________
SHIPPING METHOD
U.S. Customers in the 48 contiguous states Canada and Mexico customers
q UPS Ground q UPS Second Day q UPS Standard q UPS Express (1-2 days)
q UPS Next Day q Priority Mail q UPS Expedite (2-3 days) q Priority Mail
Alaska, Hawaii, and U.S. Territories customers International customers
q UPS Expedite (2-3 days) q UPS Express (1-2 days) q UPS Worldwide (4-5 days)
q Priority Mail q Priority Mail International
• Shipping rates for International and priority services will be calculated (based on weight and priority) and added to your order total.
• Please contact us at 1-800-248-0638 (USA+1-989-739-1447) if you would like an exact quote of your shipping charges
PART NUMBER DESCRIPTION QUANTITY UNIT PRICE TOTAL

SPECIAL INSTRUCTIONS Sub-Total

MI Residents 6% Sales Tax
Shipping Charges
ORDER TOTAL
PAYMENT OPTIONS
q AmEx q Visa q MasterCard q Discover/Novus q Cash, Check, Money Order
Card Number_______________________________________________ q Purchase Order____________________________________________
Exp. Date____________ Signature________________________________

172 800-248-0638 AIRCRAFT TOOL SUPPLY www.aircraft-tool.com

 ORDERING INSTRUCTIONS
PRICING we may contact you if there is a problem with your order.
We strive for total accuracy in the pricing and presentation of our products, • The fastest way of placing your order is by calling our order desk at 1-800-
however we have been known to make a mistake every now and then. There- 248-0638 (United States and Canada only) and one of our sales clerks will
fore, we reserve the right to make corrective changes to pricing and product gladly take your order. International customers may reach our order desk
descriptions without notice. by calling USA+989-739-1447.
• Placing your order from our online e-commerce site is also extremely fast
NO MINIMUM ORDER
and efficient. It’s located at www.aircraft-tool.com and there you’ll find a
No minimum order is required. compete shopping system that lets you order with ease at anytime, and
from anywhere. You can also order by e-mailing sales@aircraft-tool.com,
CUSTOMER INFORMATION and it will be processed as soon as we receive it. When e-mailing, please
To help us process your order quickly, please verify that both your shipping and remember to include a return e-mail address so that we can contact you.
mailing addresses are correct. Also please be sure to give us your complete • The fax number to our order desk is 1-989-739-1448, and it’s available 24
shipping address including street name and number, post office box (if any), hours a day.
postal or zip code, and country (if other than the United States). This will ensure
• And finally, you can mail your order to us at:
that your order will be delivered without delay.
Aircraft Tool Supply Company
SHIPPING METHOD P.O. Box 370
Oscoda, Michigan 48750
Please indicate your preferred method of shipment and we will try our best
to accommodate your request. Note however, that it may not be possible to CUSTOMER SERVICE
deliver your package via the method you’ve specified if your chosen carrier Our customer service representative is there to help you with your service
does not deliver to your area. In such cases, we will send your order either via needs. If you have a problem with your order or tools, please feel free to give
UPS or Mail depending on which carrier services your area. our representative a call. We are always pleased to quote price and avail-
If you choose to have your package delivered via UPS, then you must give ability on any item we sell. You may be assured of prompt and individual
us a physical street address. UPS cannot deliver to a post office box, or to an attention.
FPO/APO address.
RETURNING MERCHANDISE
Unless you request a different service, domestic orders are shipped by UPS
ground and international orders are shipped via UPS Worldwide. Priority deliv- You may return any unused item within 30 days for a full refund or exchange.
ery is also available. Please see our order form for options. A 20% restocking fee will be charged for special order items. When return-
ing an item, please send a copy of your invoice and state the nature of the
However you choose to send your order, we will usually process it and send problem (defective, ordered in error, etc) and what you would like us to do to
it out the same day if we receive it before 4 p.m. (EST) -- and if there are resolve it. Return items properly packaged and PREPAY shipping charges. Do
no backorders. If your order contains backordered items, we will send you a not return your merchandise COD, our receiving department cannot accept
partial shipment, or hold your order until it’s complete if the backordered items these shipments.
are expected to arrive shortly.
REPAIR SERVICE
ORDER LINE ITEMS
Items requiring repair and no longer covered by our warranty may be returned
Please give us the part number, description, and quantity of the items you to our repair department. Please include your complete address, email, and
would like to purchase. And note that some items such as piloted reamers a telephone number at which you may be reached during the daytime. State
will require that you specify a size in addition to the part number. Use the the nature of the problem clearly. Please indicate if you require an estimate
description area to specify sizes whenever it’s needed; and please feel free before repair. Enclose payment information to cover the cost.
to continue your order on a blank sheet of paper if there isn’t enough space
on the order form. WARRANTY
Use the Special Instructions area to provide additional instructions regarding Aircraft Tool Supply (ATS) warrants the original purchaser or, for products pur-
your order. chased from a Reseller, to the original end-user that ATS branded products
will be free from defects in materials and workmanship from the date of ship-
Michigan residents please remember to add 6% sales tax if you are an end-
ment for 1 year from the date of shipment or invoice, or in the case of ATS
user. If you are a Michigan business with a valid tax ID number, then please
PRO branded products, the serviceable lifetime of the product. During the
include it so that we can exempt your order from sales tax.
warranty period, ATS will, at its option: (1) provide replacement parts necessary
PAYMENT METHOD to repair the product, (2) replace the product with a comparable product,
(3) refund the amount you paid for the product, LESS DEPRECIATION, upon its
You may pay for your order with a Visa, MasterCard, Discover/Novus or Ameri- return. ATS will provide labor to resolve warranty issues. To obtain service under
can Express credit card by writing the card number, its expiration date, and this limited warranty, you must follow our warranty procedures. If we ask you
your signature in the space provided on the order form. to return a defective product or part, you must do so within 7 days after you
You may also make payment by sending us a check or money order with your receive the replacement part or product. ATS will charge you for replacement
order. However, please note that we reserve the right to hold personal checks parts or products if you fail to do so. If you are domestic U.S. customer who
until they are cleared by the bank, which might take up to 5 business days. purchased a product directly from ATS, we will arrange to ship replacement
parts or products to and from you, and will pay the return shipping costs. If
If you are purchasing for a government organization, a school, or a company
you live outside the United States, then you must pay shipping and applicable
that has an open account with us, you may execute the order by writing your
duty costs from and to your destination.
purchase order number in the space provided on the order form. We will then
process your order and send you a copy of the invoice for payment. Our pay- THIS LIMITED WARRANTY COVERS NORMAL USE. ATS DOES NOT WARRANT AND IS
ment terms for all accounts is net 30 days. NOT RESPONSIBLE FOR DAMAGES CAUSED BY MISUSE, ABUSE, ACCIDENTS, UN-
AUTHORIZED SERVICE OR PARTS, OR THE COMBINATION OF ATS BRANDED PROD-
SENDING YOUR ORDER UCTS WITH OTHER PRODUCTS. THIS LIMITED WARRANTY DOES NOT COVER RE-
CALIBRATIONS OR REGULAR MAINTENANCE. THIS LIMITED WARRANTY DOES NOT
Please take a moment to review your order before sending it. In particular,
COVER NON-ATS BRANDED PRODUCTS. ANY WARRANTY APPLICABLE TO NON-ATS
verify that your shipping and mailing addresses are correct, and that you’ve
BRANDED PRODUCTS IS PROVIDED BY THE ORIGINAL MANUFACTURER.
entered your payment information correctly. Also, don’t forget to include a
telephone number where you can be reached during business hours so that

800-248-0638 AIRCRAFT TOOL SUPPLY www.aircraft-tool.com 173

 INDEX

Index
Cable Tester, Ignition 115 Fuel Tank 27
Cable Thimbles & Sleeves 91 Spring Back 26, 27
Cable Tie Gun 165 Dimple Die & Squeezer Set Holder 28, 32
Cable & Wire Tools 87, 89, 90, 91 Dimpling Pliers 26, 27
Caliper, Precision 102 Dolly, Sheet Metal 78
Calipers & Dividers 103 Drill Attachments 55
A Calipers, Precision 102, 104 Drill Bits 56, 63
Camloc Installation Tools 43, 44, 45 6” Aircraft Length 59
Adel Clamp Installer 145 12” Aircraft Extension 60
Camloc Pliers 44
Air Couplers 150 Index 57
Cannon Plug Pliers 98
Aircraft Jacks Jobber Length 58
Carbide Burrs 69, 70
Alpha Aviation 140 Step Drill 63
Carbon Monoxide Detector 144
Bottle Jacks 137 Threaded 61
Jack Pads 142 Center Punch 56
Drill Chuck
Meyer TriTask 138, 139 Champion Tools 123, 124
Close Quarter 53
Air Drills 52, 53, 54 Cherrymax® Rivets 16
Keyless 53
Air Hose 150 Cherry® Riveters 35, 36, 39 Miniature 53
Air Line Connectors 150 Chip Chaser 65 Precision 53
Airloc Installation Tools 43 Clamps, Sheet Metal 42, 81 Drill Extension 65
Air Oiler 150 ClampTite 89 Drill Gauges 53
Air Ratchet 158 Cleaner Drill Guides 2
Air Regulators 15, 150 Bug Blaster 75 Plate Nut 66
Simple Green 75 Safety Wire 89
Alignment Pins, Engine Mount 134
Windshield 75 Tube 66
Allen Wrenches. See Hex Wrenches
Cleaning Drill Housing & Bushings 65
Anti-Vibration Gloves 15
Brushes 74 Drilling Equipment 50-66
Apex Bit Holders 165
Cleco Fasteners 42 Drills, Air 50, 51
Arm Gloves 132
Cleco Pliers 42 Drill Stops 53
Combination Squares 103
B Compression Riveters 29, 30, 31
Duplicating/Transfer Punch 65
Dzus Installation Tools 44, 45
Control Lock 144
Back Rivet Plate 24
Cotter Pin 167
Battery Chargers 100, 101
Counterbores, Aircraft 49 E
Battery Terminal Tools 101
Countersinks & Counterbores 1, 47, 48, 49 Edge Marker 79
Beading Kit 147 Chatterless 48
Bearing Packer 131 Edge Rolling Tool 79
Crescent® Wrench 161
Bender Brakes 85, 86 Engine Assembly Pins 2
Crimpers
Bit Driver 164 Engine Calibration 113
Deutsch 95
Bit Holder 166 Engine Equipment 112-134
Electrical Terminal 92, 93, 94, 95
Bits 164 Lug 94 Engine Protector, TopCap 133
Apex 165 Non-Insulated 94 Engine Stand 133
Holder 158 Sheet Metal 79 Engine Test Kit 4, 113
Impact 164 Cross Check Exhaust Stud Drill Guide 133
Torq 165 Dykem 143 Extend-A-Lube 166
Blind Riveters 35, 36, 37, 38, 39, 40, 41 C-Squeezer Yokes 30
Blow Gun 154 Cable & Wire Tools 88 F
Boelube® 56 Cut-Off Tool, Air 70, 158
Bolt Cutter 82 Cut-Off Wheels & Arbors 70 Fabric Tester, Maule 76
Bolt Gauge 82 Cutters Fabric Tools 76, 77
Bolt Grip 167 Carbide 48 File Card 169
Bonding Brush 72 Spotface 49 File Handles 169
Books 170, 171 Cutters, Electrical 92, 95 Files 169
Borescopes 107, 108. Battery Cable 101 Electrical 98
Bossing Mallets 78 Cyclo Polisher & Accessories 74 Flanging Tool 79
Brake Bleeder Adapters 137, 141 Cylinder Base Wrenches 134 Air 83
Brake Bleeder Tank 137 Cylinder Bore Gauge 103 Hole 79
Brake Relining Tools 26, 137 Flaring Tools
Push Rod 127
Brass Peen 25 D Tube 148, 149
Breaker Bar 161
Bucking Bars 1 Deburring Tools 64, 81, 149 Flashlights 109
Steel 21 Dental Picks 121 Flex Hone 132
Tungsten 20 Dial Indicators 103 Fluid Drain Pan 154
Burnishing Tool 81 Diamond Points & Cutters 70 Fluting Pliers 81
Burrs, Carbide 69, 70 Die Grinders 68 Fly Cutter 80
Differential Pressure Testers 112 Flying Wire Tensiometer 87
C Dimple Die Block Set 27 Forceps 92
Dimple Dies 26, 27, 28 Ford Wrench. See Crescent® Wrench
Cable Cutter 91 Avex Rivets 27 Fuel Tester 144
Cable Gauges 90, 91 Brake Rivets 26 Funnel
Cable Swager 90, 91 Camloc 45 Form-A-Funnel 132
Cable Tensiometer 87 Dzus 45 Right Angle 154

174 800-248-0638 AIRCRAFT TOOL SUPPLY www.aircraft-tool.com

 INDEX
G Magnaflux® 110 Line mans 95
Screw Removal 168
Magnetic Field Indicator 110
Gasket Punch 77, 131 Magneto Snap Ring 168
Gauges Locking Tool 114 Point Sets
Ball Hole 105 Synchronizers 114, 115 Diamond 70
Contour 105 Timer 114 Polish
Feeler 105 Magneto E-Gap Timing Kit 114 Aircraft 75
Radius 105 Magneto Overhaul Tool Kit 115 Polisher
Screw 105 Magnets 108, 109 Cyclo-5 74
Sheet Metal & Wire 105 Magnifier 109 Power Riveters
Telescoping 105 Manuals, Reference. See Books Cherry Textron® 35, 36
Graphics Removal 73 Master Orifice Tool 114 Power Tools 158
Grease Gun 151, 153 Micro-Mesh™ 75 Precision Measuring Tools 102, 103, 104, 105
Grease Joint Rejuvinator 153 Micrometers 102, 103 Pressure Gauge, Tire 135
Grinder 70 Microstop Countersink 47 Production Guns
Grip Gauge 18 Mini-Mixer 146 Paint 153, 154
Grommet 2, 77 Mirrors, Inspection 108, 109 Sprayers 154
Ground Power Plugs 100 Monkey Wrench. See Crescent® Wrench PROGRABIT® 159
Multimeter Propeller Tachometer 106
H Analog 99 Protractor 104
Digital 106
Digital 99
Hammerless Punch 56 Measuring 104
Propeller 106
Hammers N Pulling Head, Riveter 36
Brass 163
Dead Blow 163 Nibbler, Sheet Metal 84 Punch 77
Sheet Metal 78 Air 83
Nippers, Electrical. See Cutters, Electrical
Handee Clamp 167 Hand 77, 82
Nosepieces, Power Riveter. See Pulling Head, Riveter
Hand Tools 159-169 Pin. See Pin Punches
Notcher
Heat Gun 155 Punch And Flare Set 85
Tubing 84
Digitial 155 Push Rod Flaring Tool 127
Nut Driver 98
Kit 155 Push Rod Spring Compressor 122, 127
Propane 155
Heat Shrink Tubes 155
O R
Heli-Coil® 111 Oil, Air Tool 15
Hemostat 98 Rapco Vacuum Pump Wrench 131
Oil Analysis Kit 113
Hex Bit Adapter, Threaded 165 Ratchets 161, 163
Oil Filter Cutter 122, 123, 128, 129
Hexnut Driver. See Wingnut/Hexnut Driver Oil Filter Media Cutter 122, 128
Ratio Driver 164
Hex Nut Fastener 43 Reamers 62, 63
Oil Filters 125
High Voltage Cable Tester 115 Expansion 63
Oil Filter Wrench 123, 124, 129 Piloted 63
Hi-Lok® Tools 46 Oil Nut Wrench, Cessna 129
Hinge Bearing Kit 143 Tapered Pin 63
Oil Seal Installer 127 Remove Before Flight 144
Hi-Shear Tools 24 O-Ring 167 Control Lock 144
Hole Cutter 82
Wheel Chocks 144
Hole Duplicators 64
Hole Spotters 65
P Retainer Springs, Rivet Gun 15
Rivenut Installers 1, 40, 41
Hollow Cutter 48 Paint Cutters 73 Rivenuts 41
Hose Assembly Tool 145 Panel Beater & Dolly Kit 78 Rivet Cutters 18, 19
Huck® Riveters 38 Pickup Tools 109 Riveters
Pilot Cutters 47, 48 Blind 37, 38, 39, 40
I Pilots 48 Cherry® 35, 36
Pin Extractor, Terminal 92 Huck® 38
Ignition Harness Tool Kit, Slick 115 Pin Insertion/Extraction Tool 92 Lockbolt 38
Pin Punches 163 Monobolt 38
J Piper Taper Pin Removal 143 Riveters Tape 25
Piston Pin Removal Tool 122 Rivet Gauge 17
Jacks, Aircraft. See Aircraft Jacks Piston Ring Compressor 130 Rivet Guns 12, 13, 14, 15
Jet™ Sheet Metal Brakes & Shears 86 Piston Ring Groove Cleaner 130 Rivet Gun Shank Reducer 15
Jilson Shears 84 Piston Ring Installer 130 Riveting Equipment 22, 23, 24, 25, 26, 27, 28
Jogging Tool, Sheet Metal 79 Plastic Edge Scraper 56 Riveting Kits 5, 6, 7, 8, 9, 10, 11, 13, 14
P-Lead Adapter, Magneto 114 Rivet Puller 16, 40, 41
L Plastic Cleaner. See also Window Cleaner Rivet Puller, Pneumatic. See Power Riveters
Plexiglas® Drill Bits. See Plastic Drill Bits Rivet Removal Tools 19
Lapping Compound 132 Pliers 168 Rivets
Lead Thread Chaser 120 Cannon Plug 98 Assorment Pack 18
Light Cleco 42 Brake Relining 137
Inspection 109 Crimper 95 Cherrymax® 16
Light Remover (WEMAC) 98 Dimpling 26, 27 “OOPS” NAS1097 18
Electrical 92 Solid AD 17, 18, 19
M Fluting 81 Rivet Set Extension 24

800-248-0638 AIRCRAFT TOOL SUPPLY www.aircraft-tool.com 175

 INDEX
Rivet Sets 2, 14, 22, 23, 24 Snips 80 Organizer 157
Semi-Tubular 23 Fabric 76 Wrench Rack 156
Rivet Shaver 48 Sheetmetal 80 Toolboxes & Toolbags 157
Rivet Spacing Tool 25 Soldering Tools 96, 97 Tool Kit 160
Rivet Squeezer 2 Acid Brush 97 Tool Kit, Electronic 3, 93, 99
Hand Squeezers 33, 34 Desoldering 97 Torque Screwdriver 106, 162
Rivet Squeezer Accessories 29 Helping Hands 97 Torque Wrenches 123, 129, 162
Rivet Squeezer Dies 26, 28 Soldering Iron 96 Tow Bars
Rivet Squeezer Kits 32, 33, 34 Soldering Station 96 142
Rivet Squeezer Yokes 33 Spark Plug Cleaner 121 Transfer Pins 65
Rivet Trimmer 18 Abrasive 119 Transfer Punch 65
Rod Bender 149 Spark Plug Cleaner & Tester 118, 119 Trutach Digital Prop Tach 106
Rod End Bearing 145 Spark Plug Gap Gauge 124 Tube Beading Kit 147
Router Bits Spark Plug Gapper 120 Tube Benders 148, 149
Aircraft 56 Spark Plug Gaskets 123 Tube Cutters 145, 149
Rules, Measuring 104 Spark Plug Inspection Magnifier 121 Tube Notchers 84
Spark Plug Lead Wrench 123 Turnbuckle Tool 88
Spark Plug Resistance Tester 122
S Spark Plugs 126
Tweezers 92

Spark Plug Socket 121

Safety Wire 1, 88
Spark Plug Thread Chaser 1, 120 U
Safety Wire Twisters 88, 89
Sand Blaster 71 Spark Plug Thread Lubricant 121, 123 Ultrasonic Cleaners
Sanders 67 Spark Plug Tray 121, 122, 124 Bransonic 152
Detail 71 Spark Plug Vibrator Cleaner 121 Elmasonic 152
Orbital 67 Speed Handle 165 Unibit 63
Saws Spotcheck, Magnaflux® 110
Spray Wand Cleaner 154
Air 83
Reciprocating 83 Spring Hooks 98
V
Scales, Fish 143 Squeezer Sets. See Rivet Squeezer Dies Vacuum Cleaner, Air 153
Scotch-Brite™ 72, 73 Squeezer Yokes 30 Vacuum Gauge 131
Scrapers 81, 151 SR Cutter 151 Vacuum Pump Wrench 131
Non-Marring 72 Strap Duplicators 64 Vacuum Test Kit 132
Screw & Bolt Remover 159 Strut Valve Guide Flex Hones 132
Screwdriver 2, 164 Coupler 135 Valve Lappers 132
Brass Compass 144 Filler 136 Valve Spring Compressor 122, 127
Hand 164 Pump 135, 136
Valve Tappet Gauge 127
Torque 162 Service Tool 135, 136
Vise 157
Screw Extractors 159 Surface Prep 71
Vixen File. See Files
Screw-Grab® 159 Swagers 90, 91
Screwdriver Swaging Machines 90
Air 158 W
Screw Starters 165 T Wear Gauge
Scribe 82
Engine 143
Seal Tach Drive Seal Remover 124 Flap Track 143
Driver 131 Tachometer, Propeller. See Propeller Tachometer Seat Rail 143
Puller 131 Tap & Die Sets 166 Wingnut Fastener 43
Seal Installer 127 Tape Measure 104 Wingnut/Hexnut Driver 43
Seal Remover Tempest Tools 122
Tach Drive 124 Wire Crimpers. See Crimpers, Electrical Terminal
Tennsmith™ Brakes & Shears 86 Wire Harness Spoon 98
Seal All Terminal Tool 99 Tensiometer
Sealant, Aviation Gasket 131 Wire Marker 99
Cable 87 Wire Stripper 94, 95
Sealant Gun, Semco® 146 Flying Wire 87
Seamer-Hand, Sheet Metal 81 Wire Twister 88, 89
Terminal Crimpers. See Crimpers, Electrical Terminal
Semco® Sealant Products 146 Work Light 153
Test & Inspection Equipment 106 -110
Service & Support Equipment 135-151 Wrench 163
Thermometer, Infrared 109
Shears 77 Cessna Oil Nut 129
Thimbles, Oval & Stop Sleeves 91
Fabric 76 Combination/Box End 160, 161
Threadclip 76
Pinking 76 Crowsfoot 160
3M Products 72, 73
Sheet Metal 76, 84, 86 Cylinder Base 134
Tie Strap Gun. See Cable Tie Gun
Sheet Metal Fasteners 42, 43, 44, 45 Ford 161
Time-Rite® 117
Sheet Metal Tools 78-86
Timing Indicator 115 Hex. See Hex Wrenches
Shop Equipment 152, 153, 154, 155, 156, 157 Propeller 127
Tire Bead Breaker 141
Shot Bags 78 Ratchet 160, 161
Tire Mount Lube 141
Shrinker/Stretcher, Sheet Metal 85 Set 167
Tire Pressure Gauge 135
Skin Wedge 81 Vacuum Pump 131
Tire & Wheel Balancer 141
Slappers, Hardwood 78
Titanium Snips & Cutters 76, 79, 168
Slapping Spoon 78
Tool and Parts Holder 157 Z
Slick® Magneto Tools 115 Air Tool Holder 156
Snake Drill Attachment 55 GRYPMAT 156 Zyglo™ Test Kit, Magnaflux 110
Snap Ring Pliers 168 Magnetic 156

176 800-248-0638 AIRCRAFT TOOL SUPPLY www.aircraft-tool.com