ANNA UNIVERSITY, CHENNAI

UNIVERSITY DEPARTMENTS
B.E. PRODUCTION ENGINEERING
REGULATIONS – 2015
CHOICE BASED CREDIT SYSTEM

Programme Educational Objectives

1. The graduates acquire ability to create model, design, synthesize and analyze essential
production operational skills, mechanism and automation system.
2. The graduates use their talent, self-confidence, knowledge and engineering practice which
facilitate them to presume position of scientific and/or managerial leadership in their career
paths.
3. The graduates apply their consciousness of moral, professional responsibilities and
motivation to practice life-long learning in a team work environment.

Programme Outcomes
a. Graduate will demonstrate strong basics in mathematics, science and engineering which
serve as the foundation for the Programme.
b. Graduate will demonstrate the ability to design and conduct experiments, as well as to
analyse and interpret data in the spheres of fundamental engineering.
c. Graduate will demonstrate the ability to design a system, component or process to meet
desired needs within realistic constraints such as economic, environmental, social, political,
ethical, health and safety, manufacturability and sustainability.
d. Graduate will become familiar with modern engineering tools and analyse the problems
within the domains of Production Technology as the members of multidisciplinary teams
e. Graduate will acquire the capability to identify, formulate and solve engineering problems
related to production engineering.
f. Graduate will demonstrate an understanding of professional and ethical responsibility with
reference to their career in the field of production engineering.
g. Graduate will be able to communicate effectively both in verbal and non verbal forms.
h. Graduate will be trained towards developing and understanding the impact of development
of Production Technology on global, economic, environmental and societal context.
i. Graduate will be capable of understanding the value for life-long learning.
j. Graduate will demonstrate knowledge of contemporary issues pertaining to the health and
well being of desirable living forms inhabiting the environment.
k. Graduate will demonstrate the ability to use the techniques, skills and modern engineering
tools necessary for engineering practice in the field of Production Engineering.
l. Graduate will be able to design and develop innovative/ manufacturable / marketable /
environmental friendly products useful to the nation and the society.
m. Graduate will be able to manage any organisation well and will be able to emerge as a
successful entrepreneur.

Mapping PEO with POs:

PEO/ a b c d e f g h i j k l m
PO
1 √ √ √ √ √ √ √
2 √ √ √ √ √
3 √ √ √ √ √ √ √

1
 MAPPING OF COURSE OUTCOMES WITH PROGRAMME OUTCOMES:

SEMESTER I

SL.
COURSE TITLE PO1 PO2 PO3 PO4 PO5 PO6 PO7 PO8 PO9 PO10 PO11 PO12 PO13
NO.
THEORY
1. Foundational English      
2. Mathematics - I     
3. Engineering Physics        
4. Engineering Chemistry        
5. Engineering Graphics      

PRACTICAL
6. Basic Sciences Laboratory         
7. Engineering practices         
Laboratory

SEMESTER II
SL.
COURSE TITLE PO1 PO2 PO3 PO4 PO5 PO6 PO7 PO8 PO9 PO10 PO11 PO12 PO13
NO.
THEORY
1. Mathematics II      
2. Technical English      
3. Materials Science        
4. Engineering Mechanics       
5. Machining Processes        
6. Computing Techniques        
PRACTICAL
7. Drafting and Machining      
Laboratory
8. Computer Practices Laboratory   

2
 SEMESTER III
SL. COURSE TITLE PO1 PO2 PO3 PO4 PO5 PO6 PO7 PO8 PO9 PO10 PO11 PO12 PO13
NO.
THEORY
1. Numerical methods   
2. Mechanics of Solids   
3. Engineering Thermodynamics   
and Thermal Engineering
4. Engineering Fluid Mechanics   
and Machinery
5. Metallurgy and Materials        
Testing
6. Electrical, Electronics and   
Control systems
PRACTICAL
7. Metallurgy and Materials        
Testing Laboratory
8. Electrical, Electronics and   
Control Systems Laboratory

SEMESTER IV
SL.
COURSE TITLE PO1 PO2 PO3 PO4 PO5 PO6 PO7 PO8 PO9 PO10 PO11 PO12 PO13
NO.
THEORY
1. Kinematics and Dynamics of      
Machines
2. Quantitative Techniques in         
Management
3. Metal Forming Processes        
4. Foundry and Welding        
Technology
5. Metal Cutting and CNC         
Technology
6. Environmental Science and       
Engineering
3
PRACTICAL
7. Metal Forming, Foundry and       
Welding Laboratory
8. Metal Cutting and CNC       
Laboratory

SEMESTER V
SL.
COURSE TITLE PO1 PO2 PO3 PO4 PO5 PO6 PO7 PO8 PO9 PO10 PO11 PO12 PO13
NO.
THEORY
1. Engineering Metrology        
2. Machine Components Design        
3. Fluid Power Systems        
4. Statistical Quality Control and        
Reliability Engineering
5. Professional Elective-I
6. Professional Elective-II
PRACTICAL
7. Metrology and Quality Control        
Laboratory
8. Fluid Power Systems        
Laboratory

SEMESTER VI
SL.
COURSE TITLE PO1 PO2 PO3 PO4 PO5 PO6 PO7 PO8 PO9 PO10 PO11 PO12 PO13
NO.
THEORY
1. Computer Aided Product       
Design
2. Computer Integrated          
Manufacturing Systems
3. Production of Automotive        
Components

4
 4. Finite Element Analysis in         
Manufacturing
5. Professional Elective- III
6. Professional Elective-IV
PRACTICAL
7. Modelling and Analysis       
Laboratory
8. Creative and Innovative Project       
VII SEMESTER
SL.
COURSE TITLE PO1 PO2 PO3 PO4 PO5 PO6 PO7 PO8 PO9 PO10 PO11 PO12 PO13
NO.
THEORY
1. Industrial Engineering and      
Management
2. Robotic Technology      
3. Mechatronics for     
Automation
4. Professional Elective- V
5. Open Elective- I
PRACTICAL
6. Industrial Training /         
Internship
7. Mechatronics and     
Robotics Laboratory
VIII SEMESTER
SL.
COURSE TITLE PO1 PO2 PO3 PO4 PO5 PO6 PO7 PO8 PO9 PO10 PO11 PO12 PO13
NO.
THEORY
1. Professional Elective- VI
2. Open Elective- II
PRACTICAL
3. Project Work             

5
 PROFESSIONAL ELECTIVES (PE)
SL.
COURSE TITLE PO1 PO2 PO3 PO4 PO5 PO6 PO7 PO8 PO9 PO10 PO11 PO12 PO13
NO.
1. Design of Jigs, Fixtures and Dies      
2. Modern Production Techniques         
3. Micromachining and Fabrication        
4. Non Destructive Testing Methods         
5. Unconventional Machining Processes        
6. Design of Casting and Weldments       
7. Micro Electro Mechanical Systems and Nano         
Technology
8. Production of Composites         
9. Processing of Plastics and Polymers         
10. Selection of Materials       
11. Applied Heat Transfer       
12. Lean Manufacturing        
13. Total Quality Management: Principles and         
Applications
14. Advances in Operations Research         
15. Applied Probability and Statistics       
16. Purchasing and Materials Management      
17. Engineering Ethics and Human Values           
18. Concepts of Green Manufacturing       
19. Green Electronics Manufacturing       
20. Electronic Materials and Processing      
21. Surface Modification and Analytical Techniques         
22. Chemistry for Smart Materials       
Manufacturing
23. Modern Concepts in Manufacturing         
24. Supply Chain Management        
25. Mini Project       
26. Disaster Management        
27. Human Rights        

6
 EMPLOYABILITY ENHANCEMENT COURSES (EEC)

SL.
COURSE TITLE PO1 PO2 PO3 PO4 PO5 PO6 PO7 PO8 PO9 PO10 PO11 PO12 PO13
NO.
1. Project Work             
2. Creative and Innovative Project           
3. Industrial Training / Internship           

7
 ANNA UNIVERSITY, CHENNAI
UNIVERSITY DEPARTMENTS
B.E. PRODUCTION ENGINEERING
REGULATIONS – 2015
CHOICE BASED CREDIT SYSTEM
CURRICULA AND SYLLABI I - VIII SEMESTERS

SEMESTER I

S. COURSE COURSE TITLE CATEGORY CONTACT

No CODE L T P C
PERIODS
THEORY
1. HS7151 Foundational English HS 4 4 0 0 4
2. MA7151 Mathematics - I BS 4 4 0 0 4
3. PH7151 Engineering Physics BS 3 3 0 0 3
4. CY7151 Engineering Chemistry BS 3 3 0 0 3
5. GE7152 Engineering Graphics ES 5 3 2 0 4
PRACTICAL
6. BS7161 Basic Sciences BS 4 0 0 4 2
Laboratory
7. GE7162 Engineering Practices ES 4 0 0 4 2
Laboratory
TOTAL 27 17 2 8 22

SEMESTER II

S. COURSE COURSE TITLE CATEGORY CONTACT

No CODE L T P C
PERIODS
THEORY
1. MA7251 Mathematics II BS 4 4 0 0 4
2. HS7251 Technical English HS 4 4 0 0 4
3. PH7251 Materials Science BS 3 3 0 0 3
4. GE7153 Engineering ES 4 4 0 0 4
Mechanics
5. PR7201 Machining Processes PC 3 3 0 0 3
6. GE7151 Computing Techniques ES 3 3 0 0 3
PRACTICAL
7. PR7211 Drafting and Machining PC 4 0 0 4 2
Laboratory
8. GE7161 Computer Practices ES 4 0 0 4 2
Laboratory
TOTAL 29 21 0 8 25

8
 SEMESTER III
SL. COURSE COURSE TITLE CATEGORY CONTACT
NO. CODE L T P C
PERIODS
THEORY
1. AE7351 Engineering Fluid Mechanics ES 3 3 0 0 3
and Machinery
2. AE7352 Mechanics of Solids ES 3 3 0 0 3
3. AU7303 Engineering Thermodynamics ES 3 3 0 0 3
and Thermal Engineering
4. EI7307 Electrical, Electronics and ES 3 3 0 0 3
Control Systems
5. MA7354 Numerical Methods BS 4 4 0 0 4
6. PR7301 Metallurgy and Materials PC 3 3 0 0 3
Testing
PRACTICAL
7. EI7313 Electrical, Electronics and ES 4 0 0 4 2
Control Systems Laboratory
8. PR7311 Metallurgy and Materials PC 4 0 0 4 2
Testing Laboratory
TOTAL 27 19 0 8 23

SEMESTER IV

SL. COURSE COURSE TITLE CATEGORY CONTACT

NO. CODE L T P C
PERIODS
THEORY
1. GE7251 Environmental Science and HS 3 3 0 0 3
Engineering
2. PR7401 Foundry and Welding PC 3 3 0 0 3
Technology
3. PR7402 Metal Cutting and CNC PC 3 3 0 0 3
Technology
4. PR7403 Metal Forming Processes PC 3 3 0 0 3
5. PR7451 Kinematics and Dynamics of PC 4 4 0 0 4
Machines
6. PR7452 Quantitative Techniques in PC 4 4 0 0 4
Management
PRACTICAL
7. PR7411 Metal Cutting and CNC PC 4 0 0 4 2
Laboratory
8. PR7412 Metal Forming, Foundry and PC 4 0 0 4 2
Welding Laboratory
TOTAL 28 20 0 8 24

9
 SEMESTER V
SL. COURSE CONTACT
NO. COURSE TITLE CATEGORY L T P C
CODE PERIODS
THEORY
1. PR7501 Engineering Metrology PC 3 3 0 0 3
2. PR7502 Fluid Power Systems PC 3 3 0 0 3
3. PR7503 Machine Components PC 4 4 0 0 4
Design
4. PR7551 Statistical Quality Control PC 3 3 0 0 3
and Reliability Engineering
5. Professional Elective-I PE 3 3 0 0 3
6. Professional Elective-II PE 3 3 0 0 3
PRACTICAL
7. PR7511 Fluid Power Systems PC 4 0 0 4 2
Laboratory
8. PR7512 Metrology and Quality PC 4 0 0 4 2
Control Laboratory
TOTAL 27 19 0 8 23

SEMESTER VI
SL. COURSE CONTACT
NO. COURSE TITLE CATEGORY L T P C
CODE PERIODS
THEORY
1. PR7601 Computer Aided Product PC 3 3 0 0 3
Design
2. PR7602 Computer Integrated PC 3 3 0 0 3
Manufacturing
Systems
3. PR7603 Finite Element Analysis in PC 3 3 0 0 3
Manufacturing
4. PR7651 Production of Automotive PC 3 3 0 0 3
Components
5. Professional Elective- III PE 3 3 0 0 3
6. Professional Elective-IV PE 3 3 0 0 3
PRACTICAL
7. PR7611 Creative and Innovative EEC 4 0 0 4 2
Project
8. PR7612 Modelling and Analysis PC 4 0 0 4 2
Laboratory
TOTAL 26 18 0 8 22

10
 SEMESTER VII

SL. COURSE CONTACT

NO. COURSE TITLE CATEGORY L T P C
CODE PERIODS
THEORY
1. PR7701 Industrial Engineering and HS 3 3 0 0 3
Management
2. PR7702 Mechatronics for PC 3 3 0 0 3
Automation
3. PR7703 Robotic Technology PC 3 3 0 0 3
4. Professional Elective- V PE 3 3 0 0 3
5. Open Elective – I* PE 3 3 0 0 3
PRACTICAL
6. PR7711 Mechatronics and PC 4 0 0 4 2
Robotics Laboratory
7. PR7712 Industrial Training / EEC 4 0 0 4 2
Internship
TOTAL 23 15 0 8 19

SEMESTER VIII

SL. COURSE CONTACT

COURSE TITLE CATEGORY L T P C
NO. CODE PERIODS
THEORY
1. Professional Elective- VI PE 3 3 0 0 3
2. Open Elective – II* PE 3 3 0 0 3
PRACTICAL
3. PR7811 Project Work EEC 20 0 0 20 10
TOTAL 26 6 0 20 16

TOTAL NO. OF CREDITS:174

*Course from the curriculum of other UG Programmes

HUMANITIES AND SOCIAL SCIENCES (HS)

SL. COURSE COURSE TITLE CATEGORY CONTACT L T P C
NO. CODE PERIODS
1. HS7151 Foundational English HS 4 4 0 0 4
2. HS7251 Technical English HS 4 4 0 0 4
3. GE7251 Environmental Science HS 3 3 0 0 3
and Engineering
4. PR7701 Industrial Engineering and HS 3 3 0 0 3
Management

11
 BASIC SCIENCES (BS)

SL. COURSE CONTACT

COURSE TITLE CATEGORY L T P C
NO. CODE PERIODS
1. MA7151 Mathematics – I BS 4 4 0 0 4
2. PH7151 Engineering Physics BS 3 3 0 0 3
3. CY7151 Engineering BS 3 3 0 0 3
Chemistry
4. BS7161 Basic Sciences BS 4 0 0 4 2
Laboratory
5. MA7251 Mathematics – II BS 4 4 0 0 4
6. PH7251 Materials Science BS 3 3 0 0 3
7. MA7354 Numerical Methods BS 4 4 0 0 4

ENGINEERING SCIENCES (ES)

SL. COURSE CONTACT

COURSE TITLE CATEGORY L T P C
NO. CODE PERIODS
1. GE7152 Engineering ES 5 3 2 0 4
Graphics
2. GE7162 Engineering ES 4 0 0 4 2
Practices Laboratory
3. GE7161 Computer Practices ES 4 0 0 4 2
Laboratory
4. GE7151 Computing ES 3 3 0 0 3
Techniques
5. GE7153 Engineering ES 4 4 0 0 4
Mechanics
6. EI7307 Electrical, Electronics ES 3 3 0 0 3
and Control Systems
7. EI7313 Electrical, Electronics ES 4 0 0 4 2
and Control Systems
Laboratory
8. AE7352 Mechanics of Solids ES 3 3 0 0 3
9. AU7303 Engineering ES 3 3 0 0 3
Thermodynamics
and Thermal
Engineering
10. AE7351 Engineering Fluid ES 3 3 0 0 3
Mechanics and
Machinery

PROFESSIONAL CORE (PC)

SL. COURSE CONTACT

COURSE TITLE CATEGORY L T P C
NO. CODE PERIODS
1. PR7201 Machining PC 3 3 0 0 3
Processes
2. PR7211 Drafting and PC 4 0 0 4 2
Machining
Laboratory
3. PR7301 Metallurgy and PC 3 3 0 0 3
Materials Testing
12
4. PR7311 Metallurgy and PC 4 0 0 4 2
Materials Testing
Laboratory
5. PR7451 Kinematics and PC 4 4 0 0 4
Dynamics of
Machines
6. PR7452 Quantitative PC 4 4 0 0 4
Techniques in
Management
7. PR7403 Metal Forming PC 3 3 0 0 3
Processes
8. PR7401 Foundry and PC 3 3 0 0 3
Welding Technology
9. PR7402 Metal Cutting and PC 3 3 0 0 3
CNC Technology
10. PR7412 Metal Forming, PC 4 0 0 4 2
Foundry and
Welding Laboratory
11. PR7411 Metal Cutting and PC 4 0 0 4 2
CNC Laboratory
12. PR7501 Engineering PC 3 3 0 0 3
Metrology
13. PR7503 Machine PC 4 4 0 0 4
Components Design
14. PR7502 Fluid Power PC 3 3 0 0 3
Systems
15. PR7551 Statistical Quality PC 3 3 0 0 3
Control and
Reliability
Engineering
16. PR7512 Metrology and PC 4 0 0 4 2
Quality Control
Laboratory
17. PR7511 Fluid Power PC 4 0 0 4 2
Systems Laboratory
18. PR7601 Computer Aided PC 3 3 0 0 3
Product Design
19. PR7602 Computer Integrated PC 3 3 0 0 3
Manufacturing
Systems
20. PR7651 Production of PC 3 3 0 0 3
Automotive
Components
21. PR7603 Finite Element PC 3 3 0 0 3
Analysis in
Manufacturing
22. PR7612 Modelling and PC 4 0 0 4 2
Analysis Laboratory
23. PR7703 Robotic Technology PC 3 3 0 0 3
24. PR7702 Mechatronics for PC 3 3 0 0 3
Automation
25. PR7711 Mechatronics and PC 4 0 0 4 2
Robotics Laboratory

13
 PROFESSIONAL ELECTIVES (PE)

SL. COURSE CONTACT

COURSE TITLE CATEGORY L T P C
NO. CODE PERIODS
1. CY7001 Chemistry for Smart PE 3 3 0 0 3
Materials
Manufacturing
2. CY7002 Surface PE 3 3 0 0 3
Modifications and
Analytical
Techniques
3. GE7071 Disaster PE 3 3 0 0 3
Management
4. GE7074 Human Rights PE 3 3 0 0 3
5. GE7351 Engineering Ethics PE 3 3 0 0 3
and Human Values
6. MF7072 Electronic Materials PE 3 3 0 0 3
and Processing
7. PR7001 Advances in PE 3 3 0 0 3
Operations Research
8. PR7002 Applied Heat PE 3 3 0 0 3
Transfer
9. PR7003 Applied Probability PE 3 3 0 0 3
and Statistics
10. PR7004 Concepts of Green PE 3 3 0 0 3
Manufacturing
11. PR7005 Design of Casting PE 3 3 0 0 3
and Weldments
12. PR7006 Design of Jigs, PE 3 3 0 0 3
Fixtures and Dies
13. PR7007 Green Electronics PE 3 3 0 0 3
Manufacturing
14. PR7008 Lean Manufacturing PE 3 3 0 0 3
15. PR7009 Micro Electro PE 3 3 0 0 3
Mechanical Systems
and Nano
Technology
16. PR7010 Micromachining and PE 3 3 0 0 3
Fabrication
17. PR7011 Modern Concepts in PE 3 3 0 0 3
Manufacturing
18. PR7012 Modern Production PE 3 3 0 0 3
Techniques
19. PR7013 Non Destructive PE 3 3 0 0 3
Testing Methods
20. PR7014 Processing of PE 3 3 0 0 3
Plastics and
Polymers
21. PR7015 Production of PE 3 3 0 0 3
Composites
22. PR7016 Purchasing and PE 3 3 0 0 3
Materials
Management
23. PR7017 Selection of PE 3 3 0 0 3
Materials

14
 24. PR7018 Supply Chain PE 3 3 0 0 3
Management
25. PR7019 Total Quality PE 3 3 0 0 3
Management:
Principles and
Applications
26. PR7020 Unconventional PE 3 3 0 0 3
Machining Processes
27. PR7022 Mini Project PE 6 0 0 6 3
28. GE7072 Foundation Skills in PE 3 3 0 0 3
Integrated Product
Development

EMPLOYABILITY ENHANCEMENT COURSES (EEC)

SL. COURSE CONTACT

COURSE TITLE CATEGORY L T P C
NO. CODE PERIODS
1. PR7611 Creative and EEC 4 0 0 4 2
Innovative Project
2. PR7712 Industrial Training / EEC 4 0 0 4 2
Internship
3. PR7811 Project Work EEC 20 0 0 20 10

15
 SUMMARY

SL. SUBJECT CREDITS AS PER SEMESTER CREDITS

NO. AREA TOTAL

I II III IV V VI VII VIII

04 04 00 03 00 00 03 00 14
1. HS
12 07 04 00 00 00 00 00 23
2. BS
06 09 14 00 00 00 00 00 29
3. ES
00 05 05 21 17 14 08 00 70
4. PC
00 00 00 00 06 06 03 03 18
5. PE
00 00 00 00 00 00 03 03 6
6. OE
00 00 00 00 00 02 02 10 14
7. EEC
22 25 23 24 23 22 19 16 174
Total
Non Credit /
8.
Mandatory

16
HS7151 FOUNDATIONAL ENGLISH LT P C
4 0 0 4
COURSE DESCRIPTION:
This course aims at developing the language skills necessary for the first year students of
Engineering and Technology.

OBJECTIVES:
 To develop the four language skills – Listening, Speaking, Reading and Writing.
 To improve the students’ communicative competence in English.
 To teach students the various aspects of English language usage.

CONTENTS

UNIT I GREETING AND INTRODUCING ONESELF 12

Listening- Types of listening – Listening to short talks, conversations; Speaking – Speaking
about one’s place, important festivals etc. – Introducing oneself, one’s family/ friend; Reading –
Skimming a passage– Scanning for specific information; Writing- Guided writing - Free writing on
any given topic (My favourite place/ Hobbies/ School life, writing about one’s leisure time
activities, hometown, etc.); Grammar – Tenses (present and present continuous) -Question types
- Regular and irregular verbs; Vocabulary – Synonyms and Antonyms.

UNIT II GIVING INSTRUCTIONS AND DIRECTIONS 12

Listening – Listening and responding to instructions; Speaking – Telephone etiquette - Giving
oral instructions/ Describing a process – Asking and answering questions; Reading – Reading and
finding key information in a given text - Critical reading - Writing –Process description( non-
technical)- Grammar – Tense (simple past& past continuous) - Use of imperatives – Subject –
verb agreement – Active and passive voice; - Vocabulary – Compound words – Word formation –
Word expansion (root words).

UNIT III READING AND UNDERSTANDING VISUAL MATERIAL 12

Listening- Listening to lectures/ talks and completing a task; Speaking –Role play/ Simulation –
Group interaction; Reading – Reading and interpreting visual material; Writing- Jumbled
sentences – Discourse markers and Cohesive devices – Essay writing (cause & effect/
narrative);Grammar – Tenses (perfect), Conditional clauses –Modal verbs; Vocabulary –Cause
and effect words; Phrasal verbs in context.

UNIT IV CRITICAL READING AND WRITING 12

Listening- Watching videos/ documentaries and responding to questions based on them;
Speaking Informal and formal conversation; Reading –Critical reading (prediction & inference);
Writing–Essay writing ( compare & contrast/ analytical) – Interpretation of visual materials;
Grammar – Tenses (future time reference);Vocabulary – One word substitutes (with meanings) –
Use of abbreviations & acronyms – Idioms in sentences.

UNIT V LETTER WRITING AND SENDING E-MAILS 12

Listening- Listening to programmes/broadcast/ telecast/ podcast; Speaking – Giving impromptu
talks, Making presentations on given topics- Discussion on the presentation; Reading –Extensive
reading; Writing- Poster making – Letter writing (Formal and E-mail) ;Grammar – Direct and
Indirect speech – Combining sentences using connectives; Vocabulary –Collocation;

TEACHING METHODS:
Interactive sessions for the speaking module.
Use of audio – visual aids for the various listening activities.
Contextual Grammar Teaching.

17
EVALUATION PATTERN:
Internals – 50%
End Semester – 50%
TOTAL:60 PERIODS
OUTCOMES:
 Students will improve their reading and writing skills
 Students will become fluent and proficient in communicative English
 Students will be able to improve their interpersonal communication

TEXTBOOK:
1. Richards, Jack.C with Jonathan Hull and Susan Proctor New Interchange : English for
International Communication. (level2, Student’s Book) Cambridge University
Press,New Delhi: 2010.

REFERENCES:
1. Bailey, Stephen. Academic Writing: A practical guide for students. New York:
Rutledge,2011.
2. Morgan, David and Nicholas Regan. Take-Off: Technical English for Engineering.
London: Garnet Publishing Limited, 2008.
3. Redston, Chris & Gillies Cunningham Face2Face (Pre-intermediate Student’s Book&
Workbook) Cambridge University Press, New Delhi: 2005
4. Comfort, Jeremy, et al. Speaking Effectively : Developing Speaking Skillsfor Business
English. Cambridge University Press, Cambridge: Reprint 2011.

MA7151 MATHEMATICS – I L T P C
(Common to all branches of B.E. / B.Tech. Programmes in 4 0 0 4
I Semester)
OBJECTIVES:
 The goal of this course is for students to gain proficiency in calculus computations.
In calculus, we use three main tools for analyzing and describing the behavior of
functions: limits, derivatives, and integrals. Students will use these tools to solve
application problems in a variety of settings ranging from physics and biology to
business and economics.
 To make the student acquire sound knowledge of techniques in solving ordinary
differential equations that model engineering problems.
 To familiarize the student with functions of several variables. This is needed in many
branches of engineering.
 To acquaint the student with mathematical tools needed in evaluating multiple integrals
and their usage.
12
UNIT I DIFFERENTIAL CALCULUS
Representation of functions - New functions from old functions - Limit of a function - Limits at
infinity - Continuity - Derivatives - Differentiation rules - Polar coordinate system -
Differentiation in polar coordinates - Maxima and Minima of functions of one variable.
UNIT II FUNCTIONS OF SEVERAL VARIABLES 12
Partial derivatives – Homogeneous functions and Euler’s theorem – Total derivative –
Differentiation of implicit functions – Change of variables – Jacobians – Partial differentiation
of implicit functions – Taylor’s series for functions of two variables – Errors and
approximations – Maxima and minima of functions of two variables – Lagrange’s method of
undetermined multipliers.

18
UNIT III INTEGRAL CALCULUS 12
Definite and Indefinite integrals - Substitution rule - Techniques of Integration - Integration by
parts, Trigonometric integrals, Trigonometric substitutions, Integration of rational functions by
partial fraction, Integration of irrational functions - Improper integrals.

UNIT IV MULTIPLE INTEGRALS 12

Double integrals – Change of order of integration – Double integrals in polar coordinates –
Area enclosed by plane curves – Triple integrals – Volume of solids – Change of variables in
double and triple integrals.

UNIT V DIFFERENTIAL EQUATIONS 12

Method of variation of parameters – Method of undetermined coefficients – Homogenous
equation of Euler’s and Legendre’s type – System of simultaneous linear differential
equations with constant coefficients.
TOTAL: 60 PERIODS
OUTCOMES:
 Understanding of the ideas of limits and continuity and an ability to calculate with
them and apply them.
 Improved facility in algebraic manipulation.
 Fluency in differentiation.
 Fluency in integration using standard methods, including the ability to find an
appropriate method for a given integral.
 Understanding the ideas of differential equations and facility in solving simple
standard examples.

TEXTBOOKS:
1. James Stewart, "Calculus with Early Transcendental Functions", Cengage Learning,
New Delhi, 2008.
2. Narayanan S. and Manicavachagom Pillai T. K., “Calculus" Volume I and II, S.
Viswanathan Publishers Pvt. Ltd., Chennai, 2007.
3. Erwin Kreyszig, "Advanced Engineering Mathematics", John Wiley and Sons, 9th
Edition, New Delhi, 2014.
4. Grewal B.S., “Higher Engineering Mathematics”, Khanna Publishers, New Delhi, 43rd
Edition, 2014.

REFERENCES:
1. Ramana B.V., “Higher Engineering Mathematics”, Tata McGraw Hill Co. Ltd., New Delhi,
11th Reprint, 2010.
2. Jain R.K. and Iyengar S.R.K., “Advanced Engineering Mathematics”, Narosa
Publications, New Delhi, 3rd Edition, 2007.
3. Bali N., Goyal M. and Watkins C., “Advanced Engineering Mathematics”, Firewall Media
(An imprint of Lakshmi Publications Pvt., Ltd.,), New Delhi, 7th Edition, 2009.
4. Greenberg M.D., “Advanced Engineering Mathematics”, Pearson Education, New Delhi,
2nd Edition, 5th Reprint, 2009.
5. Peter V.O’Neil, “Advanced Engineering Mathematics”, Cengage Learning India Pvt., Ltd,
New Delhi, 2007.

19
PH7151 ENGINEERING PHYSICS L T P C
(Common to all branches of B.E / B.Tech programmes) 3 0 0 3
OBJECTIVE:
 To introduce the concept and different ways to determine moduli of elasticity and applications.
 To instill the concept of sound, reverberation, noise cancellation, and ultrasonic generation,
detection and applications
 To inculcate an idea of thermal properties of materials, heat flow through materials and
quantum physics
 To promote the basic understanding of interferometers, principles and applications of lasers,
optical fibers and sensors
 To establish a sound grasp of knowledge on the basics, significance and growth of single
crystals

UNIT I PROPERTIES OF MATTER 9

Elasticity – Poisson’s ratio and relationship between moduli (qualitative) - stress-strain diagram for
ductile and brittle materials, uses - factors affecting elastic modulus and tensile strength - bending
of beams - cantilever - bending moment - Young’s modulus determination - theory and experiment
- uniform and non-uniform bending - I shaped girders - twisting couple - hollow cylinder - shaft -
torsion pendulum - determination of rigidity modulus- moment of inertia of a body (regular and
irregular).

UNIT II ACOUSTICS AND ULTRASONICS 9

Classification of sound - loudness and intensity - Weber-Fechner Law - standard intensity and
intensity level - decibel - reverberation - reverberation time - calculation of reverberation time for
different types of buildings – sound absorbing materials - factors affecting acoustics of buildings :
focussing, interference, echo, echelon effect, resonance - noise and their remedies. Ultrasonics:
production - magnetostriction and piezoelectric methods - detection of ultrasound - acoustic
grating – ultrasonic interferometer - industrial applications – Non-destructive testing - ultrasonic
method: scan modes and practice.

UNIT III THERMAL AND MODERN PHYSICS 9

Thermal expansion - thermal stress - expansion joints - bimetallic strips - thermal conductivity-
heat conductions in solids – flow of heat through compound media - Forbe’s and Lee’s disc
method: theory and experiment- Black body radiation – Planck’s theory (derivation) – Compton
effect – wave model of radiation and matter – Schrödinger’s wave equation – time dependent and
independent equations – Physical significance of wave function – particle in a one dimensional
box.

UNIT IV APPLIED OPTICS 9

Interference - Michelson interferometer: construction, working, determination of wave length and
thickness - anti-reflection coating - air wedge and its applications - Lasers – principle and
applications – Einstein’s coefficients – CO2 and Nd:YAG laser - semiconductor lasers: homo
junction and hetro junction - construction and working – applications. Optical fibres - classification
(index & mode based) - principle and propagation of light in optical fibres - acceptance angle and
numerical aperture - fibre optic communication system - active and passive sensors.

UNIT V CRYSTAL PHYSICS 9

Single crystalline, polycrystalline and amorphous materials – Single crystals: unit cell, crystal
systems, Bravais lattices, ditections and planes in a crystal, Miller indices - interplanar distance for
a cubic crystal - coordination number and packing factor for SC, BCC, FCC, HCP and diamond
structures - structure and significance of NaCl, CsCl, ZnS and graphite - crystal imperfections:
point defects, line defects – Burger vectors, dislocations and stacking faults – Growth of single
crystals: Bridgman and Czochralski methods.
TOTAL: 45 PERIODS

20
OUTCOME:
 The students will understand different moduli of elasticity, their determination and applications.
 The students will gain knowledge on the properties of sound, noise cancellation, and
production, detection and applications of ultrasonics
 The students will acquire sound knowledge on thermal expansion and thermal conductivity of
materials. Further they will gain an idea of quantum physics.
 The students will gain knowledge on interferometers, lasers and fiber optics
 The students will secure knowledge on the basics of crystal structures and their significance.
Further they gain basic ideas of growing single crystals.

TEXTBOOKS:
1. Gaur R.K. and Gupta S.L., “Engineering Physics”, Dhanpat Rai Publications (2013)
2. Palanisamy P.K., “Engineering Physics”, Scitech Publications (P) Ltd. (2006).
3. Arumugam M., “Engineering Physics”, Anuradha Publications (2000)
REFERENCES:
1. Serway R.A. and Jewett, J.W. “Physics for Scientists and Engineers with Modern Physics”.
Brooks/cole Publishing Co. (2010).
2. Tipler P.A. and Mosca, G.P., “Physics for Scientists and Engineers with Modern Physics”.
W.H.Freeman, (2007).
3. Markert J.T.,Ohanian, H. and Ohanian, M. “Physics for Engineers and Scientists”. W.W.Norton
& Co. (2007).

CY7151 ENGINEERING CHEMISTRY L T P C

3 0 0 3
OBJECTIVE
 To develop an understanding about fundamentals of polymer chemistry.
 Brief elucidation on surface chemistry and catalysis.
 To develop sound knowledge photochemistry and spectroscopy.
 To impart basic knowledge on chemical thermodynamics.
 To understand the basic concepts of nano chemistry.
UNIT I POLYMER CHEMISTRY 9
Introduction: Functionality-degree of polymerization. Classification of polymers- natural and
synthetic, thermoplastic and thermosetting. Types and mechanism of polymerization: addition
(free radical, cationic, anionic and living); condensation and copolymerization. Properties of
polymers: Tg, tacticity, molecular weight-weight average, number average and polydispersity
index. Techniques of polymerization: Bulk, emulsion, solution and suspension.

UNIT II SURFACE CHEMISTRYAND CATALYSIS 9

Adsorption-Types of adsorption-adsorption of gases on solids- adsorption from solutions-
Types of isotherms–Frendlich adsorption isotherm, Langmuir adsorption isotherm. Industrial
applications of adsorption. Catalysis: Characteristics and types of catalysts-homogeneous
and heterogeneous, auto catalysis. Enzyme catalysis -factors affecting enzyme catalysis,
Michaelis-Menton equation. Industrial applications of catalysts.

UNIT III PHOTOCHEMISTRY AND SPECTROSCOPY 9

Photochemistry: Laws of photochemistry-Grotthuss-Draper law, Stark-Einstein law and
Lambert-Beer Law. Photo processes-internal conversion, inter-system crossing, fluorescence,
phosphorescence, chemiluminescence and photo-sensitization. Spectroscopy:
Electromagnetic spectrum-absorption of radiation-electronic, vibrational and rotational
transitions. Width and intensities of spectral lines. Spectrophotometric estimation of iron. UV-
Vis and IR spectroscopy- principles, instrumentation (Block diagram) and applications.

9
21
UNIT IV CHEMICAL THERMODYNAMICS
Second law: Entropy-entropy change for an ideal gas, reversible and irreversible processes;
entropy of phase transitions; Free energy and work function: Helmholtz and Gibbs free energy
functions; Criteria of spontaneity; Gibbs-Helmholtz equation; Clausius Clapeyron equation;
Maxwell relations-Van’t Hoff isotherm and isochore. Chemical potential; Gibbs-Duhem
equation- variation of chemical potential with temperature and pressure.

UNIT V NANOCHEMISTRY 9
Basics-distinction between molecules, nanoparticles and bulk materials; size-dependent
properties. Preparation of nanoparticles – sol-gel and solvothermal. Preparation of carbon
nanotube by chemical vapour deposition and laser ablation.Preparation of nanowires by VLS
growth, electrochemical deposition and electro spinning. Properties and uses of
nanoparticles, nanoclusters, nanorods, nanotubes and nanowires.
TOTAL: 45 PERIODS

OUTCOME
 Will be familiar with polymer chemistry, surface chemistry and catalysis.
 Will know the photochemistry, spectroscopy and chemical thermodynamics.
 Will know the fundamentals of nano chemistry.

TEXTBOOKS
1. Jain P. C. & Monica Jain., “Engineering Chemistry”, DhanpatRai Publishing Company
(P) Ltd, New Delhi, 2014.
2. Kannan P., Ravikrishnan A., “Engineering Chemistry”, Sri Krishna Hitech Publishing
Company Pvt. Ltd. Chennai, 2014

REFERENCES
1. Pahari A., Chauhan B., “Engineering Chemistry”, Firewall Media, New Delhi, 2012.
2. Sivasankar B., “Engineering Chemistry”, Tata McGraw-Hill Publishing Company Ltd,
New Delhi, 2012.
3. AshimaSrivastava. Janhavi N N, Concepts of Engineering Chemistry”, ACME Learning
Private Limited., New Delhi., 2010.
4. Vairam S., Kalyani P., Suba Ramesh., “Engineering Chemistry”, Wiley India Pvt Ltd.,
New Delhi., 2011.

GE7152 ENGINEERING GRAPHICS L T P C

3 2 0 4
OBJECTIVES
 To develop in students, graphic skills for communication of concepts, ideas and
design of engineering products and expose them to existing national standards
related to technical drawings.

CONCEPTS AND CONVENTIONS (NOT FOR EXAMINATION) 1

Importance of graphics in engineering applications – Use of drafting instruments – BIS
conventions and specifications – Size, layout and folding of drawing sheets – Lettering and
dimensioning.

22
UNIT I PLANE CURVES AND FREE HANDSKETCHING 14
Basic Geometrical constructions, Curves used in engineering practices-Conics –
Construction of ellipse, parabola and hyperbola by eccentricity method – Construction of
cycloid – construction of involutes of square and circle – Drawing of tangents and normal to
the above curves. Visualization concepts and Free Hand sketching: Visualization principles –
Representation of Three Dimensional objects – Layout of views- Free hand sketching of
multiple views from pictorial views of objects

UNIT II PROJECTION OF POINTS, LINES AND PLANE SURFACES 14

Orthographic projection- principles-Principal planes-First angle projection-Projection of points.
Projection of straight lines (only First angle projections) inclined to both the principal planes-
Determination of true lengths and true inclinations by rotating line method and trapezoidal
method and traces Projection of planes (polygonal and circular surfaces) inclined to both the
principal planes by rotating object method.

UNIT III PROJECTION OF SOLIDS 14

Projection of simple solids like prisms, pyramids, cylinder, cone and truncated solids when
the axis is inclined to both the principal planes by rotating object method and auxiliary plane
method.
UNIT IV PROJECTION OF SECTIONED SOLIDS AND DEVELOPMENT OF 14
SURFACES
Sectioning of solids in simple vertical position when the cutting plane is inclined to the one of
the principal planes and perpendicular to the other – obtaining true shape of section.
Development of lateral surfaces of simple and sectioned solids – Prisms, pyramids cylinders
and cones. Development of lateral surfaces of solids with cut-outs and holes.

UNIT V ISOMETRIC AND PERSPECTIVE PROJECTIONS 15

Principles of isometric projection – isometric scale –Isometric projections of simple solids and
truncated solids - Prisms, pyramids, cylinders, cones- combination of two solid objects in
simple vertical positions and miscellaneous problems.
Perspective projection of simple solids-Prisms, pyramids and cylinders by visual ray method
and vanishing point method.

COMPUTER AIDED DRAFTING (DEMONSTRATION ONLY) 3

Introduction to drafting packages and demonstration of their use.
L=45+T=30, TOTAL: 75 PERIODS
OUTCOMES:
On Completion of the course the student will be able to
 Perform free hand sketching of basic geometrical shapes and multiple views of
objects.
 Draw orthographic projections of lines, planes and solids
 Obtain development of surfaces.
 Prepare isometric and perspective views of simple solids.

TEXT BOOK:
1. N.D.Bhatt and V.M.Panchal, “Engineering Drawing”, Charotar Publishing House, 50th
Edition, 2010.

REFERENCES:
1. K.R.Gopalakrishna., “Engineering Drawing” (Vol I&II combined) Subhas Stores,
Bangalore, 2007
2. Luzzader, Warren.J., and Duff,John M.,,’’ Fundamentals of Engineering Drawing with
an introduction to Interactive Computer Graphics for Design and Production”, Eastern
Economy Edition, Prentice Hall of India Pvt Ltd, New Delhi, 2005
3. M.B.Shah and B.C.Rana, “Engineering Drawing”, Pearson, 2nd Edition, 2009

23
 4. K.Venugopal and V.Prabhu Raja, “Engineering Graphics”, New Age International
(P)Limited ,2008.
5. K. V.Natarajan, “A text book of Engineering Graphics”, 28th Edition, Dhanalakshmi
Publishers, Chennai, 2015.
6. Basant Agarwal and Agarwal C.M., “Engineering Drawing”, Tata McGraw Hill Publishing
Company Limited, New Delhi, 2008.
7. N.S Parthasarathy and Vela Murali, “ Engineering Drawing”, Oxford University Press,
2015

Publication of Bureau of Indian Standards:

1. IS 10711 – 2001: Technical products Documentation – Size and lay out ofdrawing
sheets
2. IS 9609 (Parts 0 & 1) – 2001: Technical products Documentation – Lettering.
3. IS 10714 (Part 20) – 2001 & SP 46 – 2003: Lines for technical drawings.
4. IS 11669 – 1986 & SP 46 – 2003: Dimensioning of Technical Drawings.
5. IS 15021 (Parts 1 to 4) – 2001: Technical drawings – Projection Methods.

Special points applicable to University Examinations on Engineering Graphics:

1. There will be five questions, each of either or type covering all units of the syllabus.
2. All questions will carry equal marks of 20 each making a total of 100.
3. The answer paper shall consist of drawing sheets of A3 size only. The students will be
permitted to use appropriate scale to fit solution within A3 size.
4. The examination will be conducted in appropriate sessions on the same day.

BS7161 BASIC SCIENCES LABORATORY LT PC

(Common to all branches of B.E. / B.Tech Programmes) 00 4 2

PHYSICS LABORATORY: (Any Seven Experiments)

OBJECTIVE:
 To inculcate experimental skills to test basic understanding of physics of materials
including properties of matter, thermal and optical properties.
 To induce the students to familiarize with experimental determination of velocity of
ultrasonic waves, band gap determination and viscosity of liquids.

1. Torsional pendulum - Determination of rigidity modulus of wire and moment of inertia of disc
2. Non-uniform bending - Determination of young’s modulus
3. Uniform bending – Determination of young’s modulus
4. Lee’s disc Determination of thermal conductivity of a bad conductor
5. Potentiometer-Determination of thermo e.m.f of a thermocouple
6. Laser- Determination of the wave length of the laser using grating
7. Air wedge - Determination of thickness of a thin sheet/wire
8. a) Optical fibre -Determination of Numerical Aperture and acceptance angle
b) Compact disc- Determination of width of the groove using laser.
9. Acoustic grating- Determination of velocity of ultrasonic waves in liquids.
10. Ultrasonic interferometer – determination of the velocity of sound and compressibility of
liquids
11. Post office box -Determination of Band gap of a semiconductor.
12. Spectrometer- Determination of wavelength using gating.
13. Viscosity of liquids - Determination of co-efficient of viscosity of a liquid by
Poiseuille‟s flow

24
 OUTCOME:
 To determine various moduli of elasticity and also various thermal and optical properties of
materials.
 To determine the velocity of ultrasonic waves, band gap determination and viscosity of
liquids.

CHEMISTRY LABORATORY:
(Minimum of 8 experiments to be conducted)

1. Estimation of HCl using Na2CO3 as primary standard and Determination of alkalinity in water
sample.
2. Determination of total, temporary & permanent hardness of water by EDTA method.
3. Determination of DO content of water sample by Winkler’s method.
4. Determination of chloride content of water sample by argentometric method.
5. Estimation of copper content of the given solution by Iodometry.
6. Determination of strength of given hydrochloric acid using pH meter.
7. Determination of strength of acids in a mixture of acids using conductivity meter.
8. Estimation of iron content of the given solution using potentiometer.
9. Estimation of iron content of the water sample using spectrophotometer (1, 10-
Phenanthroline/thiocyanate method).
10. Estimation of sodium and potassium present in water using flame photometer.
11. Determination of molecular weight of poly vinyl alcohol using Ostwald viscometer.
12. Pseudo first order kinetics-ester hydrolysis.
13. Corrosion experiment-weight loss method.
14. Determination of CMC.
15. Phase change in a solid.
TOTAL: 60 PERIODS

TEXTBOOKS
1. Vogel’s Textbook of Quantitative Chemical Analysis (8TH edition, 2014)
2. Laboratory Manual- Department of Chemistry, CEGC, Anna University (2014).

GE7162 ENGINEERING PRACTICES LABORATORY L T P C

(Common to all Branches of B.E. / B.Tech. Programmes) 0 0 4 2
OBJECTIVES
To provide exposure to the students with hands-on experience on various Basic Engineering
Practices in Civil, Mechanical, Electrical and Electronics Engineering.
GROUP – A (CIVIL & ELECTRICAL)
1. CIVIL ENGINEERING PRACTICES 15
PLUMBING
Basic pipe connections involving the fittings like valves, taps, coupling, unions, reducers,
elbows and other components used in household fittings. Preparation of plumbing line
sketches.
• Laying pipe connection to the suction side of a pump.
• Laying pipe connection to the delivery side of a pump.
• Practice in connecting pipes of different materials: Metal, plastic and flexible pipes used in
household appliances.
WOOD WORK
Sawing, planing and making joints like T-Joint, Mortise and Tenon joint and Dovetail
joint.

STUDY
• Study of joints in door panels and wooden furniture
• Study of common industrial trusses using models.
25
2. ELECTRICAL ENGINEERING PRACTICES 15
• Basic household wiring using Switches, Fuse, Indicator and Lamp etc.,
• Stair case light wiring
• Tube – light wiring
• Preparation of wiring diagrams for a given situation.
• Study of Iron-Box, Fan Regulator andEmergency Lamp

GROUP – B (MECHANICAL AND ELECTRONICS) 15

3. MECHANICAL ENGINEERING PRACTICES
WELDING
• Arc welding of Butt Joints, Lap Joints, and Tee Joints
• Gas welding Practice.
• Basic Machining - Simple turning, drilling and tapping operations..
• Study and assembling of the following:
a. Centrifugal pump
b. Mixie
c. Air Conditioner.
DEMONSTRATION ON FOUNDRY OPERATIONS.

4. ELECTRONIC ENGINEERING PRACTICES 15

• Soldering simple electronic circuits and checking continuity.
• Assembling electronic components on a small PCB and Testing.
• Study of Telephone, FM radio and Low Voltage Power supplies.
TOTAL: 60 PERIODS

OUTCOMES
 Ability to fabricate carpentry components and to lay pipe connections including plumbing
works.
 Ability to use welding equipments to join the structures
 Ability to do wiring for electrical connections and to fabricate electronics circuits.

HS7251 TECHNICAL ENGLISH L T P C

4 0 0 4
OBJECTIVES
 To enable students acquire proficiency in technical communication.
 To enhance their reading and writing skills in a technical context.
 To teach various language learning strategies needed in aprofessional environment.

CONTENTS

UNIT I ANALYTICAL READING 12

Listening- Listening to informal and formal conversations; Speaking – Conversation
Skills(opening, turn taking, closing )-explaining how something works-describing technical
functions and applications;Reading –Analytical reading, Deductive and inductive reasoning;
Writing- vision statement–structuring paragraphs.

UNIT II SUMMARISING 12
Listening- Listening to lectures/ talks on Science & Technology;Speaking –Summarizing/ Oral
Reporting, Reading – Reading Scientific and Technical articles; Writing- Extended definition –Lab
Reports – Summary writing.

26
UNIT III DESCRIBING VISUAL MATERIAL 12
Listening- Listening to a panel discussion; Speaking – Speaking at formal situations; Reading –
Reading journal articles - Speed reading;Writing-data commentary-describing visual material-
writing problem-process- solution-the structure of problem-solution texts- writing critiques

UNIT IV WRITING/ E-MAILING THE JOB APPLICATION 12

Listening- Listening to/ Viewing model interviews; Speaking –Speaking at different types of
interviews – Role play practice ( mock interview); Reading – Reading job advertisements and
profile of the company concerned;Writing- job application – cover letter –Résumé preparation.

UNIT V REPORT WRITING 12

Listening- Viewing a model group discussion;Speaking –Participating in a discussion -
Presentation;Reading – Case study - analyse -evaluate – arrive at a solution;Writing–
Recommendations- Types of reports (feasibility report)- designing and reporting surveys- – Report
format.- writing discursive essays.

TEACHING METHODS:
Practice writing
Conduct model and mock interview and group discussion.
Use of audio – visual aids to facilitate understanding of various forms of technical communication.
Interactive sessions.

EVALUATION PATTERN:
Internals – 50%
End Semester – 50%
TOTAL:60 PERIODS
OUTCOMES
 Students will learn the structure and organization of various forms of technical
communication.
 Students will be able to listen and respond to technical content.
 Students will be able to use different forms of communication in their respective fields.

TEXTBOOK:
1. Craig,Thaine. Cambridge Academic English: An integrated skills course for
EAP(Student’s Book)Level: Intermediate Cambridge University Press, New Delhi: 2012

REFERENCES:
1. Laws, Anne. Presentations. Hyderabad: Orient Blackswan, 2011.
2. Ibbotson, Mark. Cambridge English for Engineering. Cambridge University Press,
Cambridge,New Delhi: 2008
3. Naterop, Jean B. and Rod Revell. Telephoning in English. Cambridge: Cambridge University
Press, 2004.
4. Rutherford, Andrea J. Basic Communication Skills for Technology. New Delhi: Pearson
Education, 2001.
5. Bailey, Stephen. Academic Writing A practical Guide for Students. Routledge, London:
2004
6. Hewings, Martin. Cambridge Academic English: An integrated skills course for
EAP(Student’s Book)Level: Intermediate Cambridge University Press, New Delhi: 2012.

27
MA7251 MATHEMATICS - II L T P C
(Common to all branches of B.E. / B.Tech. Programmes 4 0 0 4
in II Semester)
OBJECTIVES:
 To develop the use of matrix algebra techniques that is needed by engineers for
practical applications.
 To acquaint the student with the concepts of vector calculus, needed for problems in all
engineering disciplines.
 To develop an understanding of the standard techniques of complex variable theory so
as to enable the student to apply them with confidence, in application areas such as
heat conduction, elasticity, fluid dynamics and flow of the electric current.
 To make the student appreciate the purpose of using transforms to create a new
domain in which it is easier to handle the problem that is being investigated.

UNIT I MATRICES 12
Eigenvalues and Eigenvectors of a real matrix – Characteristic equation – Properties of
eigenvalues and eigenvectors – Cayley-Hamilton theorem – Diagonalization of matrices –
Reduction of a quadratic form to canonical form by orthogonal transformation – Nature of
quadratic forms.

UNIT II VECTOR CALCULUS 12

Gradient and directional derivative – Divergence and Curl – Irrotational and Solenoidal
vector fields – Line integral over a plane curve – Surface integral - Area of a curved surface -
Volume integral - Green’s, Gauss divergence and Stoke’s theorems – Verification and
application in evaluating line, surface and volume integrals.

UNIT III ANALYTIC FUNCTION 12

Analytic functions – Necessary and sufficient conditions for analyticity - Properties –
Harmonic conjugates – Construction of analytic function - Conformal mapping – Mapping by
1 2
functions w  z  c, az, , z - Bilinear transformation.
z
UNIT IV COMPLEX INTEGRATION 12
Line integral - Cauchy’s integral theorem – Cauchy’s integral formula – Taylor’s and
Laurent’s series – Singularities – Residues – Residue theorem – Application of residue
theorem for evaluation of real integrals – Use of circular contour and semicircular contour
with no pole on real axis.

UNIT V LAPLACE TRANSFORMS 12

Existence conditions – Transforms of elementary functions – Transform of unit step function
and unit impulse function – Basic properties – Shifting theorems -Transforms of derivatives
and integrals – Initial and final value theorems – Inverse transforms – Convolution theorem –
– Transform of periodic functions – Application to solution of linear ordinary differential
equations with constant coefficients.
TOTAL: 60 PERIODS
OUTCOMES:
 Upon successful completion of the course, students should be able to:
 Evaluate real and complex integrals using the Cauchy integral formula and the
residue theorem
 Appreciate how complex methods can be used to prove some important theoretical
results.
 Evaluate line, surface and volume integrals in simple coordinate systems
 Calculate grad, div and curl in Cartesian and other simple coordinate systems, and
establish identities connecting these quantities
 Use Gauss, Stokes and Greens theorems to simplify calculations of integrals and
prove simple results.
28
 TEXTBOOKS:
1. Erwin Kreyszig, "Advanced Engineering Mathematics", John Wiley and Sons, 9th
Edition, New Delhi, 2014.
2. Grewal B.S., “Higher Engineering Mathematics”, Khanna Publishers, New Delhi, 43rd
Edition, 2014.

REFERENCES:
1. Ramana, B.V. “Higher Engineering Mathematics”, Tata McGraw Hill, New Delhi, 2010.
2. Glyn James, “Advanced Modern Engineering Mathematics”, Pearson Education, New
Delhi, 2007.
3. Jain R.K. and Iyengar S.R.K., “Advanced Engineering Mathematics”, Narosa
Publications, New Delhi, 3rd Edition, 2007.
4. Bali N., Goyal M. and Watkins C., “Advanced Engineering Mathematics”, Firewall Media
(An imprint of Lakshmi Publications Pvt., Ltd.,), New Delhi, 7th Edition, 2009.
5. Peter V. O’Neil , “Advanced Engineering Mathematics”, Cengage Learning India Pvt.,
Ltd, New Delhi, 2007.

PH7251 MATERIALS SCIENCE L T P C

(Common to Manufacturing, Industrial, Mining, Aeronautical, 3 0 0 3
Automobile and Production Engineering)
OBJECTIVE:
 To impart knowledge on the basics of binary phase diagrams and their applications
 To learn the phase diagram, effect of alloying elements and various transformations in the Fe-
C system, and also the heat treatment of steels.
 To introduce various strengthening methods of materials, and also various mechanical
properties and their measurement
 To instill the types, properties and applications of magnetic, dielectric and superconducting
materials.
 To introduce the preparation, properties and applications of various new materials.

UNIT I PHASE DIAGRAMS 9

Solid solutions - Hume Rothery's rules - The phase rule - single component system - one-
component system of iron - binary phase diagrams - isomorphous systems - the tie-line rule - the
lever rule - application to isomorphous system - eutectic phase diagram - peritectic phase diagram
- other invariant reactions – free energy composition curves for binary systems - microstructural
change during cooling.

UNIT II FERROUS ALLOYS AND HEAT TREATMENT 9

The iron-carbon equilibrium diagram - phases, invariant reactions - microstructue of slowly cooled
steels - eutectoid steel, hypo and hypereutectoid steels - effect of alloying elements on the Fe-C
system - diffusion in solids - Fick's law - phase transformations - T-T-T-diagram for eutectoid steel
– pearlitic, baintic and martensitic transformations - tempering of martensite - heat treatment of
steels - annealing - normalizing - quenching and tempering - case hardening - induction, flame and
laser hardening - carburizing, cyaniding, carbonitriding and nitriding.

29
UNIT III MECHANICAL PROPERTIES 9
Tensile test - plastic deformation mechanisms - slip and twinning - role of dislocations in slip -
strengthening methods - strain hardening - refinement of the grain size - solid solution
strengthening - precipitation hardening - creep resistance - creep curves - mechanisms of creep -
creep-resistant materials - fracture - the Griffith criterion - critical stress intensity factor and its
determination - fatigue failure - fatigue tests - methods of increasing fatigue life - hardness -
Rockwell and Brinell hardness - Knoop and Vickers microhardness.

UNIT IV MAGNETIC, DIELECTRIC AND SUPERCONDUCTING MATERIALS 9

Ferromagnetism – Domain theory – types of energy – hysteresis – hard and soft magnetic
materials – ferrites - dielectric materials – types of polarization – Langevin-Debye equation –
frequency effects on polarization - dielectric breakdown – insulating materials – Ferroelectric
materials - superconducting materials, properties, types and applications.

UNIT V NEW MATERIALS 9

Ceramics – types and applications – Composites: classification, role of matrix and reinforcement –
processing of fiber reinforced plastics – Metallic glasses – types , glass forming ability of alloys –
Inoue criteria – melt spinning process – applications - Shape memory alloys – phases, shape
memory effect, pseudoelastic effect – NiTi alloy – applications- Nanomaterials – preparation: ball
milling and chemical vapour deposition - properties and applications – carbon nanotubes -
Biomaterials
TOTAL: 45 PERIODS
OUTCOME:
Upon completion of this course, the students will
 gain knowledge on the basics of binary phase diagrams and the use of lever rule
 learn about the Fe-C phase diagram, effect of alloying elements, TTT in the Fe-C system, and
also the heat treatment of steels.
 understand the significance of dislocations, strengthening mechanisms, and tensile, creep,
hardness and fracture behavior of materials
 acquire knowledge on the types, properties and applications of magnetic, dielectric and
superconducting materials.
 get adequate understanding on the preparation, properties and applications of ceramics,
composites, metallic glasses, shape-memory alloys and nanomaterials.

TEXTBOOKS:
1. Raghavan, V. “Physical Metallurgy: Principles and Practice”, Phi Learning (2009).
2. Balasubramaniam, R. “Callister's Materials Science and Engineering”, Wiley India Pvt. Ltd.
(2014).
3. Palanisamy P.K., “Materials Science” , Scitech (2013).

REFERENCES:
1. Raghavan, V. “Materials Science and Engineering”, Printice Hall of India (2007).
2. Shackelford, J.F. “Introduction to Materials Science for Engineers”. Pearson India (2006).
3. Donald Askeland. “Materials Science and Engineering”, Brooks/Cole (2010).
4. Smith, W.F., Hashemi, J. and R.Prakash. “Materials Science and Engineering”,Tata Mcgraw
Hill Education Private Limited (2014).

GE7153 ENGINEERING MECHANICS L T P C

4 0 0 4
OBJECTIVE :
 The objective of this course is to inculcate in the student the ability to analyze any
problem in a simple and logical manner and to predict the physical phenomena and
thus lay the foundation for engineering applications.
30
UNIT I STATICS OF PARTICLES 12
Fundamental Concepts and Principles, Systems of Units, Method of Problem Solutions,
Statics of Particles -Forces in a Plane, Resultant of Forces, Resolution of a Force into
Components, Rectangular Components of a Force, Unit Vectors.
Equilibrium of a Particle- Newton’s First Law of Motion, Space and Free-Body Diagrams,
Forces in Space, Equilibrium of a Particle in Space.
UNIT II EQUILIBRIUM OF RIGID BODIES 12
Principle of Transmissibility, Equivalent Forces, Vector Product of Two Vectors, Moment of a
Force about a Point ,Varignon’s Theorem, Rectangular Components of the Moment of a
Force, Scalar Product of Two Vectors, Mixed Triple Product of Three Vectors, Moment of a
Force about an Axis, Couple - Moment of a Couple, Equivalent Couples, Addition of Couples,
Resolution of a Given Force into a Force -Couple system, Further Reduction of a System of
Forces, Equilibrium in Two and Three Dimensions - Reactions at Supports and Connections.

UNIT III DISTRIBUTED FORCES 16

Centroids of lines and areas – symmetrical and unsymmetrical shapes, Determination of
Centroids by Integration , Theorems of Pappus-Guldinus, Distributed Loads on Beams,
Center of Gravity of a Three-Dimensional Body, Centroid of a Volume, Composite Bodies ,
Determination of Centroids of Volumes by Integration.
Moments of Inertia of Areas and Mass - Determination of the Moment of Inertia of an Area by
Integration , Polar Moment of Inertia , Radius of Gyration of an Area , Parallel-Axis Theorem ,
Moments of Inertia of Composite Areas, Moments of Inertia of a Mass - Moments of Inertia
of Thin Plates , Determination of the Moment of Inertia of a Three-Dimensional Body by
Integration.

UNIT IV FRICTION 8
The Laws of Dry Friction. Coefficients of Friction, Angles of Friction, Wedges, Wheel Friction.
Rolling Resistance , Ladder friction.

UNIT V DYNAMICS OF PARTICLES 12

Kinematics - Rectilinear Motion and Curvilinear Motion of Particles.
Kinetics- Newton’s Second Law of Motion -Equations of Motions , Dynamic Equilibrium,
Energy and Momentum Methods - Work of a Force , Kinetic Energy of a Particle, Principle of
Work and Energy, Principle of Impulse and Momentum, Impact, Method of Virtual Work -
Work of a Force, Potential Energy, Potential Energy and Equilibrium.
L – 45 + T – 15 TOTAL: 60 PERIODS

OUTCOMES:
 Upon completion of this course, students will be able to construct meaningful
mathematical models of physical problems and solve them.

TEXT BOOK
1. Beer,F.P and Johnson Jr. E.R, “Vector Mechanics for Engineers”, McGraw-Hill Education
(India) Pvt. Ltd. 10th Edition, 2013.

REFERENCES
1. Hibbeller, R.C., Engineering Mechanics: Statics, and Engineering Mechanics:
Dynamics, 13th edition, Prentice Hall, 2013.
2. J.L. Meriam & L.G. Karige, Engineering Mechanics: Statics (Volume I) and Engineering
Mechanics: Dynamics, 7th edition, Wiley student edition, 2013.
3. P. Boresi & J. Schmidt, Engineering Mechanics: Statics and Dynamics, 1/e, Cengage
learning, 2008.
4. Irving H. Shames, G. Krishna Mohana Rao, Engineering Mechanics - Statics and
Dynamics, Fourth Edition – PHI / Pearson Education Asia Pvt. Ltd., 2006.
5. Vela Murali, “Engineering Mechanics”, Oxford University Press (2010)
31
PR7201 MACHINING PROCESSES L T P C
3 0 0 3
OBJECTIVES:
• To impart the knowledge on basic concepts of various machining Processes and
Machine tools.
• Classes to be supported by demonstration in the workshop and screening of video film of
the various operations of the machines.

UNIT I LATHE 10
Introduction to production processes – types of production (job, batch and mass) – production
processes – Casting, Forming, Machining and Welding, Machine Tool – Lathe – Engine
Lathe – block diagram – sketch – functions of each part – work holding devices in lathe –
functions – Chuck, Centre, Dogs, Steady Rest and Follower Rest, mechanism of lathe –
Apron, Feed, Tumbler Gear, various operations performed in Lathe – facing, turning,
chamfering and knurling – relative positions of tool and job – Taper turning operations (three
methods)_ thread cutting – RH and LH thread, single start and multi start with application –
Method of thread cutting – selection and arrangement of tool and work. Problems in metric
and inch thread conversion – Specifications o f Lathe – Burnishing.

UNIT II SHAPER, PLANER & SLOTTER 9

Purpose of shaping – block diagram – functions of each part. Purpose of planer – block
diagram – functions of each part. Purpose of slotting machine – block diagram – functions
and working principle. Operations carried out – horizontal plane, vertical plane, v type with
relative position – Comparison of planer with shaper – work holding devices in shaper and
planer – Quick return mechanism in shaper – mechanical and hydraulic – cross feed
mechanism – Types of planer with application – Comparison of shaping with slotting – tool
holding devices in shaper, planer and slotter – specifications of shaper, planer and slotter
simple problems to calculate the velocity – speed, feed and depth of cut.

UNIT III DRILLING 8

Purpose of drilling – block diagram and function – types of drilling machines – portable drilling
– bench type – sensitive drilling – radial arm drilling – functions of parts – purpose and
operation – gang drilling, multiple drill head, upright drilling, relative operations – reaming,
boring, tapping, counter boring, courses sinking, trepanning and spot facing (with simple
sketch, purpose and application). Work holding devices – specification torque calculation –
speed, feed and depth of cut.

UNIT IV MILLING 9
Milling machine purpose – up and down milling – classification of milling machines – slot,
keyway machining – methods of milling – single piece, string, rotary, index, gang,
progressive, copy. Horizontal milling machine – block diagram – functions of each part-
applications – Vertical milling machine – block diagram – functions of each part applications –
Gear cutting using milling machine – procedure with neat sketch – milling cutters –
peripheral, face, end T slot, form etc. – attachments and special accessories for milling –
rotary, slotting attachment – indexing mechanism – methods of indexing – direct, plain,
compound and differential indexing – problems – specifications – cutting conditions and
parameters.
9
UNIT V GRINDING
Purpose – classification – surface finish – applications – grinding wheel – types –
specifications – selection – surface grinding machine – block diagram – functions of each part
– cylindrical grinding – Centreless grinding – Comparison – infeed, end feed and through
feed. Balancing, dressing, loading and Truing of wheel – special grinding machines –
specification of machine – cutting condition.
TOTAL: 45 PERIODS

32
OUTCOMES:
 In a position to select and use the machine suitably
 Obtain the total knowledge about the machines
 Helps to improve (or) modify the design by combining the various operations.
TEXT BOOKS:
1. HMT Bangalore, “Production Technology”, Tata Mc-Graw Hill Publishing Company
Limited, New Delhi, 2001.
2. P.C. Sharma, “A Text Book of Production Technology”, S.Chand and Company, 2001.

REFERENCES:
1. R.K. Jain, “Production Technology”, Khanna Publishers, New Delhi, 2001.
2. Hajra Choudhary etal, “Elements of Production Technology –Vol.II”, Asia Publishing
House, 2000.
3. B.Kumar, “Manufacturing Technology”, Khanna Publishers, New Delhi 2000.
4. P.Radhakrishnan, “Manufacturing Technology, Vol.I”, Scitech Publications, 2002.
5. Kalpakjain ,”Manufacturing Process for Engineering Material”, Addison - Wesley
Publication 2000.

GE7151 COMPUTING TECHNIQUES L T P C

(Common to all branches of Engineering and Technology) 3 0 0 3
OBJECTIVE
• To learn programming using a structured programming language.
• To provide C programming exposure.
• To introduce foundational concepts of computer programming to students of different
branches of Engineering and Technology.

UNIT I INTRODUCTION 9
Introduction to Computers – Computer Software – Computer Networks and Internet - Need for
logical thinking – Problem formulation and development of simple programs - Pseudo code -
Flow Chart and Algorithms.

UNIT II C PROGRAMMING BASICS 9

Introduction to C programming – Fundamentals – Structure of a C program – Compilation and
linking processes - Constants, Variables – Data Types – Expressions - Operators –Decision
Making and Branching – Looping statements – Solving Simple Scientific and Statistical
Problems.

UNIT III ARRAYS AND STRINGS 9

Arrays – Initialization – Declaration – One dimensional and two dimensional arrays - Strings-
String operations – String Arrays - simple programs- sorting- searching – matrix operations.

UNIT IV POINTERS 9
Macros - Storage classes –Basic concepts of Pointers– Pointer arithmetic - Example Problems
- Basic file operations

UNIT V FUNCTIONS AND USER DEFINED DATA TYPES 9

Function – definition of function – Declaration of function – Pass by value – Pass by reference –
Recursion –Enumerators – Structures - Unions
TOTAL : 45 PERIODS

33
OUTCOME
At the end of the course, the student should be able to:
 Write C program for simple applications
 Formulate algorithm for simple problems
 Analyze different data types and arrays
 Perform simple search and sort.
 Use programming language to solve problems.

TEXTBOOKS:
1. Pradip Dey, Manas Ghosh, “Computer Fundamentals and Programming in C”, Second
Edition, Oxford University Press, 2013
2. Ashok N. Kamthane, “Computer programming”, Pearson Education, 2007.
3. Yashavant P. Kanetkar. “Let Us C”, BPB Publications, 2011.

REFERENCES:
1. Kernighan,B.W and Ritchie,D.M, “The C Programming language”, Second Edition,
Pearson Education, 2006
2. Byron S Gottfried, “Programming with C”, Schaums Outlines, Second Edition, Tata
McGraw-Hill, 2006.
3. R.G. Dromey, “How to Solve it by Computer”, Pearson Education, Fourth Reprint, 2007

PR7211 DRAFTING AND MACHINING LAB L T P C

0 0 4 2
OBJECTIVES
• To get hands on experience in drafting of engineering components
• To get hands on experience in the conventional machines.
• To prepare the process planning sheets for all the operations and then follow the
sequences during the machining processes.

LIST OF EXPERIMENTS
Machining Exercises
1. Preparation of part drawing to machine a raw material in a lathe – (involving facing,
turning, stepped turning, knurling, taper turning, thread cutting and parting)
2. Preparation of part drawing to machine a blank material in a shaper – (involving
horizontal, vertical surface machining, V-shape, dove-tail end)
3. Preparation of part drawing to machine the given part in drilling machine – (involving
single hole, multi hole, equidistant, equi-pitch, reaming, boring, counter boring, counter
sinking).
4. Preparation of part drawing to mill the groove part in a milling machine – (involving key
way, slot, spur gear, patched milling, spline, gang milling).
5. Preparation of part drawing to grind the part in a grinding machine-(involving flat surface,
cylindrical surface).
6. Preparation of part drawing to machine a part in combination of machine-( Lathe & Milling,
Lathe &Grinding, Shaper & Grinding).

Drafting Exercises
Any CAD software with 2D modeling to used by students for drafting exercises
1. Practice on Drafting Software using Measuring commands; Basic Draw Commands;
Display Commands GRID, SNAP, CIRCLE, LINE, ARC LIMITS, ZOOM, PAN.
2. Practice on using Editing commands; Creating layers:
CHANGE,ERASE,EXTEND,TRIM,GRIPS. Construction Commands; ARRAY, COPY,
34
 MIRROR, MOVE, OFFSET, FILLET, CHAMFER, OSNAP.
3. Placing lettering on a drawing; Crosshatching a drawing TEXT BHATCH.
4. 2D drafting of automobile components like engine crank shaft , connecting rod etc.,
5. 2D drafting of machine components.
6. 2D drafting of machine shop drawing.
7. 2D drafting of pin joints, cotter joints and bearings.
The drafting exercise include process planning sheet where student shall fill up the data for
producing the product as per drawing. As per the process planning sheet the machining
operations are to be conducted.
1. Step turning, Taper Turning/ Threading and Knurling operations in Lathe.
2. Eccentric turning in a Lathe
3. Multi start Threading/ Burnishing operations in a Turret Lathe.
4. Machining to make a cube/ V-Block using shaper.
5. Counter sinking, Counter Boring and Tapping operation in a drilling machine.
6. Surfacing/Pocket Milling in a vertical milling machine.
7. Polygonal shape milling in a horizontal milling machine.
8. Flat surface grinding and cylindrical grinding operations.
TOTAL: 60 PERIODS
OUTCOMES
 Enable to interpret drawing of component, process sheet, etc.
 Trained to draft part drawing with use of CAD software and operate basic machining tools.
 Impart practical knowledge on the selection of machines and processes to manufacture
components.

GE7161 COMPUTER PRACTICES LABORATORY L T P C

0 0 4 2
OBJECTIVES
 To understand the basic programming constructs and articulate how they are used to
develop a program with a desired runtime execution flow.
 To articulate where computer programs fit in the provision of computer-based solutions
to real world problems.
 To learn to use user defined data structures.

LIST OF EXPERIMENTS
1. Search, generate, manipulate data using MS office/ Open Office
2. Presentation and Visualization – graphs, charts, 2D, 3D
3. Problem formulation, Problem Solving and Flowcharts
4. C Programming using Simple statements and expressions
5. Scientific problem solving using decision making and looping.
6. Simple programming for one dimensional and two dimensional arrays.
7. Solving problems using String functions
8. Programs with user defined functions
9. Program using Recursive Function
10. Program using structures and unions.
TOTAL: 60 PERIODS
OUTCOMES
At the end of the course, the student should be able to:
 Write and compile programs using C programs.
 Write program with the concept of Structured Programming
 Identify suitable data structure for solving a problem
 Demonstrate the use of conditional statement.

35
LABORATORY REQUIREMENTS FOR BATCH OF 30 STUDENTS
30 Systems with C compiler

AE7351 ENGINEERING FLUID MECHANICS AND MACHINERY L T P C

3 0 0 3
OBJECTIVE:
 The student is introduced to the mechanics of fluids through a thorough understanding of the
properties of the fluids. The dynamics of fluids is introduced through the control volume
approach which gives an integrated understanding of the transport of mass, momentum and
energy. The applications of the conservation laws to flow though pipes and hydraulics
machines are studied.

UNIT I INTRODUCTION 8
Units and dimensions- Properties of fluids- mass density, specific weight, specific volume, specific
gravity, viscosity, compressibility, vapor pressure, surface tension and capillarity. Flow
characteristics – concept of control volume - application of continuity equation, energy equation
and momentum equation.

UNIT II FLOW THROUGH CIRCULAR CONDUITS 9

Hydraulic and energy gradient - Laminar flow through circular conduits and circular annuli-
Boundary layer concepts – types of boundary layer thickness – Darcy Weisbach equation –friction
factor- Moody diagram- commercial pipes- minor loses – Flow through pipes in series and parallel.

UNIT III DIMENSIONAL ANALYSIS 8

Need for dimensional analysis – methods of dimensional analysis – Similitude –types of similitude
- Dimensionless parameters- application of dimensionless parameters – Model analysis.

UNIT IV TURBINES ` 10
Impact of jets - Euler’s equation - Theory of roto-dynamic machines-Classification of turbines –
heads and efficiencies – velocity triangles. Axial, radial and mixed flow turbines. Pelton wheel,
Francis turbine and Kaplan turbines- working principles - work done by water on the runner –.
Specific speed - unit quantities – performance curves for turbines .

UNIT V PUMPS 10
Various efficiencies– velocity components at entry and exit of the rotor- velocity triangles -
Centrifugal pumps– working principle - work done by the impeller - performance curves -
Reciprocating pump- working principle – Rotary pumps –classification.
TOTAL: 45 PERIODS
OUTCOME:
 On completion of the course, students will be familiar with all the basic concepts of fluids
and fluid flow phenomenon, conservation equations and their applications to simple
problems.

TEXT BOOKS:
1. Bansal, R.K., Fluid Mechanics and Hydraulics Machines, Laxmi Publications (P) Ltd., New
Delhi, Ninth edition,2015.
2. Rathakrishnan. E, Fluid Mechanics, Prentice Hall of India (II Ed.), 2007.

REFERENCES:
1. Ramamurtham. S, Hydraulics, Fluid Mechanics and Fluid Machines, Dhanpat Rai
Publishing Co Pvt., Ltd, 9th edition, 2012.
2. Kumar. K.L. Engineering Fluid Mechanics (VII Ed.) S Chand publishers Reprint Edition
2006 edition (1 December 2010)
3. Streeter. V. L., and Wylie, E.B., Fluid Mechanics, McGraw Hill, 1983.

36
AE7352 MECHANICS OF SOLIDS L T P C
3 0 0 3
OBJECTIVES
 The objective of this course is to make the students to understand the concepts of stress
and strain and their relationships by analysis of solids and structures, to analyze
determinate and indeterminate axial members, torsional members, and beams, in order to
determine axial forces, torque, shear forces, bending moments, stresses and deflections.

UNIT I STRESS-STRAIN – AXIAL LOADING 9

Definition of stress and strain- Stress-Strain relation- Relation between material constants.-Bar
under axial loading- Statically determinate and indeterminate cases – Thermal stress-Impact
Loading

UNIT II STRESSES IN BEAMS 9

Types of beams and loadings – Relation between shear force and bending moment - Shear force
and bending moment diagrams – Euler beam theory - Bending stress in beams – Shear stress in
beam – Composite beam.

UNIT III DEFLECTION OF BEAM 9

Various methods for statically determinate beams - Double integration method – Macaulay’s
method – Moment area method – Conjucate Beam method – Method of superposition

UNIT IV TORSION AND SPRINGS 9

Shear stress and twist relation for circular section – Comparison of hollow shaft and solid shaft –
Compound shaft – Power transmission by circular shafts – Springs – Deflection expression for
close coiled helical spring – Stress in springs.

UNIT V BIAXIAL STRESS 9

Thin walled cylinder under internal pressure – Principal stresses for general biaxial stress field –
Mohr’s circle - Stresses in combined loading
TOTAL : 45 PERIODS
OUTCOMES
At the end of the course, the students are expected to
 Know about how a solid (materials, structures) behaves when it is exposed to forces and
deformations.
 Apply the fundamental concepts of principle of superposition, equilibrium, compatibility,
force-deformation, and stress-strain relationships to the solid and structural mechanics
problems
 Analyze determinate and indeterminate bars, beams, to determine axial forces, torques,
shear forces, and bending moments
 Have physical insight into distribution of stresses and strains in structural members

TEXT BOOKS:
1. Stephen Timoshenko, ‘Strength of Materials’, Vol I & II, CBS Publishers and Distributors, 3rd
edition, 2004.
2. William A. Nash, Merle C. Potter, "Schaum's Outline of Strength of Materials", 6th Edition,
McGraw Hill Education, 2014

REFERENCES:
1. Clive L. Dym , Irving H. Shames, “Solid Mechanics : A Variational Approach, Augmented
Edition”, Springer publishers, 2013
2. R.K.Rajput, ‘Strength of Materials’, S Chand; 4th Rev. Edition 2007.
3. Timothy A. Philpot, "Mechanics of Materials: An Integrated Learning System," 3rd Edition,
Wiley, 2012.
4. Ferdinand P. Beer, E. Russell Johnston Jr., John T. Dewolf and David Mazurek, "Mechanics of
Materials," seventh edition, McGraw-Hill, 2014

37
5. Russell C. Hibbeler, "Mechanics of Materials", Ninth Edition, Pearson education, 2013
6. Roy R Craig, "Mechanics of Materials", Third Edition, John Wiley & Sons, 2011
7. James M Gere, Barry J Goodno, "Mechanics of Materials", Eighth Edition, Cengage Learning,
2012

AU7303 ENGINEERING THERMODYNAMICS AND THERMAL L T P C

ENGINEERING 3 0 0 3
OBJECTIVE:
 The objective of this course is to introduce the basic principles of thermodynamics and
thermal engineering via real world engineering examples, to show students how
thermodynamics is applied in engineering practice.

UNIT I BASIC THERMODYNAMICS 9

Systems, closed, open and isolated. Property, state, path and process, quasi-static process,
Zeroth low, First law. Steady flow energy equation. Heat and work transfer in flow and non-flow
processes. Second law, Kelvin-Planck statement – Clausius statement - Concept of Entropy,
Clausius inequality, Entropy change in non-flow processes.

UNIT II AIR STANDARD CYCLES AND COMPRESSORS 9

Otto, Diesel, Dual combustion and Brayton cycles. Air standard efficiency. Mean effective
pressure. Compressors, Classifications of compressors, Single stage and multi stage, Effect of
intercooler in multi stage compressor, Perfect and imperfect intercooler, work done by the
compressor, Reciprocating, Rotary, Axial, Vane compressors.

UNIT III STEAM AND JET PROPULSION 9

Properties of steam, Dryness fraction, Quality of steam by steam tables and Mollier chart –
Rankine cycle, Work done, Steam rate – Steam Nozzles, Types of nozzles, Friction in nozzles -
Simple jet propulsion system – Thrust rocket motor – Specific impulse.

UNIT IV REFRIGERATION AND AIR-CONDITIONING 9

Principles of refrigeration, Vapour compression – Vapour absorption types, comparison - Co-
efficient of performance (COP), Properties of refrigerants – Basic Principle, Summer, winter and
Year round Air conditioning.

UNIT V HEAT AND MASS TRANSFER 9

Modes of heat transfer, Heat conduction in parallel, radial and composite wall – Basics of
Convective heat transfer. Fundamentals of Radiative heat transfer – Flow through heat
exchangers, Logarithmic Mean Temperature Difference (LMTD) for parallel flow and Arithmetic
Mean Temperature Difference (AMTD) counter flow heat exchangers.
TOTAL : 45 PERIODS
(Use of standard Steam tables with Mollier chart and Refrigerant tables are permitted)

OUTCOMES:
 Students will demonstrate a basic understanding of the nature of the thermodynamic
processes for pure substances of ideal gases
 Student will demonstrate a basic understanding of the First law Thermodynamics and its
application to systems and control volumes
 To analyze any problem in an engineering approach based on basic concepts and logic
sequences.
 To understand the basics and modes of heat transfer, Refrigeration and Air-conditioners.

38
TEXT BOOKS:
1. Chattopadhyay. P Engineering Thermodynamics”, oxford University Press, New Delhi,
2010.
2. Nag.P.K., “Engineering Thermodynamics”, Tata McGraw-Hill, New Delhi, 2007.
3. Rathakrishnan E., “Fundamentals of Engineering Thermodynamics” Prentice-Hall India,
2005.

REFERENCES:
1. Ramalingam K.K. “Thermodynamics”, Sci-Tech Publications, 2006
2. Holman.J.P., “Thermodynamics”, 3rd Ed. McGraw-Hill, 2007.
3. Venwylen and Sontag, “Classical Thermodynamics”, Wiley Eastern, 1987
4. Arora C.P, “Thermodynamics”, Tata McGraw-Hill, New Delhi, 2003.
5. Merala C, Pother, Craig W, Somerton, “Thermodynamics for Engineers”, Schaum Outline
Series, Tata McGraw-Hill, New Delhi, 2004.
6. Mathur& Sharma Steam Tables, Jain Publishers, NewDelhi.

EI7307 ELECTRICAL, ELECTRONICS AND CONTROL SYSTEMS L T PC

3 0 0 3
OBJECTIVES:
 Gain knowledge on construction and working principle of AC and DC machines.
 Get exposed to basic electronic devices and their applications.
 Gain knowledge on logic gates and their applications in digital electronics
 Will be in a position to analyze open and closed loop control systems.
 Exposed to various types of measurement Systems.

UNIT I ELECTRICAL MACHINES 9

DC Generators: Construction-Principle of Operation-EMF Equation and Applications- DC Motors:
Back EMF-Voltage and torque equation- Principle of transformer- EMF Equation - Tests on
transformer - AC motors: Construction and basic Principle of Operation-Starting and Running
torques.
UNIT II BASIC ELECTRONIC DEVICES 9
Semiconductor devices: Diodes, BJT, FET, UJT, SCR Principle of Operation and their
characteristics and applications -Rectifier and power supply circuits.

UNIT III DIGITAL ELECTRONICS 9

Number systems – binary codes - logic gates - Boolean algebra, laws & theorems - simplification
of Boolean expression - implementation of Boolean expressions using logic gates - Combinational
circuits- Design of adder, subtractor, encoders, decoders, multiplexers and demultiplexers-Flip
flops.
UNIT IV BASICS OF CONTROL SYSTEM 9
Introduction to control systems – open loop and closed loop- Block diagram and signal flow graph
representation-realization of transfer functions-Time and Frequency response of dynamic systems-
Stability analysis.
UNIT V MEASURING SYSTEMS 9
Measurements of Electrical quantities: voltmeter, ammeter, watt- meter, Digital Multi Meters-
Cathode Ray Oscilloscopes: frequency, phase, amplitude measurements-Recorders: tape
recorder, X-Y recorders, UV recorders- Data loggers-Virtual instruments.
TOTAL: 45 PERIODS
OUTCOMES:
 Will be in a position to suggest suitable AC/DC machines for a given application.
 Able to analyze the characteristics of electronic devices such as diodes Thyristors family.
39
  Able to understand the fundamental concepts and solve problems applied to digital system.
 Able to analyze and solve problems for open loop and closed loop control systems.
 Will be in a position to suggest suitable measuring device for a given application.

TEXT BOOKS:
1. Theraja, B.L., " A Text Books of Electrical Technology ", S.S.Chand and Co., New Delhi,
1998.
2. Boylestad & Nashelsky, “Electronic Devices & Circuit Theory”, Eighth edition, Prentice Hall
Of India (P) Ltd., 2003.
3. M. Morris Mano and Michael D. Ciletti, Digital Design, Pearson Education, 2013.
4. Nagrath. J.J. and Gopal, Control system engineering, New Age International Pvt Ltd.,
2000.
REFERENCES:
1. Donald P Leach, Albert Paul Malvino and GoutamSaha, Digital Principles and Applications,
Tata McGraw Hill,6th edition, 2006.
2. Helfrick.A.D., and Cooper.W.D., Electronic Instrumentation and Measurement techniques,
Prentice Hall of India, 2nd edition, 2008.
3. Rajput R.K . Text book of Electrical Engineering, Firewell Media Publications,1st edition,
2004.

MA7354 NUMERICAL METHODS L T P C

4 0 0 4
OBJECTIVE:
 To provide the mathematical foundations of numerical techniques for solving linear system,
eigen value problems, interpolation, numerical differentiation and integration and the errors
associated with them;
 To demonstrate the utility of numerical techniques of ordinary and partial differential
equations in solving engineering problems where analytical solutions are not readily
available.

UNIT I SOLUTION OF EQUATIONS AND EIGENVALUE PROBLEMS 12

Solution of algebraic and transcendental equations - Fixed point iteration method – Newton-
Raphson method- Solution of linear system of equations - Gauss elimination method – Pivoting -
Gauss-Jordan methods – Iterative methods of Gauss-Jacobi and Gauss-Seidel - Matrix Inversion
by Gauss-Jordan method - Eigenvalues of a matrix by Power method and by Jacobi’s method.

UNIT II INTERPOLATION AND APPROXIMATION 12

Interpolation with unequal intervals - Lagrange interpolation – Newton’s divided difference
interpolation – Cubic Splines - Interpolation with equal intervals - Newton’s forward and backward
difference formulae – Least square method - Linear curve fitting.

UNIT III NUMERICAL DIFFERENTATION AND INTEGRATION 12

Approximation of derivatives using interpolation polynomials - Numerical integration using
Trapezoidal, Simpson’s 1/3 and Simpson’s 3/8 rules – Romberg’s method - Two point and three
point Gaussian quadrature formulae – Evaluation of double integrals by Trapezoidal and
Simpson’s rules.

40
UNIT IV INITIAL VALUE PROBLEMS FOR ORDINARY DIFFERENTIAL
EQUATIONS 12
Single step-methods - Taylor’s series method - Euler’s method - Modified Euler’s method - Fourth
order Runge-Kutta method for solving first and second order equations - Multi-step methods -
Milne’s and Adams-Bashforth predictor-corrector methods for solving first order equations.
UNIT V BOUNDARY VALUE PROBLEMS IN ORDINARY AND PARTIAL
DIFFERENTIAL EQUATIONS 12
Finite difference methods for solving two-point linear boundary value problems - Finite difference
techniques for the solution of two dimensional Laplace’s and Poisson’s equations on rectangular
domain – One dimensional heat-flow equation by explicit and implicit (Crank-Nicholson) methods -
One dimensional wave equation by explicit method.
TOTAL:60 PERIODS
OUTCOMES:
 Demonstrate understanding of common numerical methods and how they are used to
obtain approximate solutions.
 Apply numerical methods to obtain approximate solutions to mathematical problems.
 Derive numerical methods for various mathematical operations and tasks, such as
interpolation, differentiation, integration, the solution of linear and nonlinear equations, and
the solution of differential equations.
 Analyse and evaluate the accuracy of common numerical methods

TEXT BOOKS:
1. Grewal, B.S. and Grewal,J.S., “Numerical methods in Engineering and Science”, Khanna
Publishers, New Delhi, 9th Edition, 2011.
2. Sankara Rao. K., “Numerical methods for Scientists and Engineers”, Prentice Hall of India
Private Ltd., New Delhi, 3rd Edition, 2007.

REFERENCES:
1. Brian Bradie, “A Friendly Introduction to Numerical Analysis”, Pearson Education
Asia, New Delhi, 1st Edition, 2007.
2. Gerald, C.F. and Wheatley, P.O., “Applied Numerical Analysis”, Pearson
Education Asia, New Delhi, 6th Edition, 2006.
3. Laurene V. Fausett, “Applied Numerical Analysis using MATLAB”, Pearson
Education, New Delhi, 1st print, 2nd Edition, 2009.
4. S. R. K. Iyengar, R. K. Jain, Mahinder Kumar Jain, "Numerical Methods for Scientific
and Engineering Computation", 6th Edition, New Age International Publishers, New
Delhi, 2012.

PR7301 METALLURGY AND MATERIALS TESTING L T P C

3 0 0 3
OBJECTIVES:
 To impart knowledge on the structure, properties and applications of ferrous and non
ferrous metals so as to identify and select suitable materials for various engineering
applications.
 To familiarize property evaluation by various testing methods and fundamentals of
characterization techniques to understand structure property correlation.

UNIT I MICROSTRUCTURAL DEVELOPMENT AND METALLOGRAPHY 9

Basics of Metallographic microscopy -sample preparation – resolution – contrast – Metallographic
microscope - quantitative techniques - Homogenous and Heterogeneous nucleation - grain
growth- directional solidification- cast and weld microstructure- ingot and continuous casting -
microstructures of Steels and Cast irons - spinodal decomposition - Pearlitic, bainitic and
martensitic transformations - Effect of alloying elements on steel (P,S, Al, Pb, Mn, Si, Cr, Ni, Mo,
V, Ti and W) – Specification and Standards, Properties and application -stainless and tool steels –

41
HSLA steels – TRIP steel- maraging steels – Gray, white, malleable, spheroidal / graphite, alloy
cast irons

UNIT II HEAT TREATMENT AND KINETICS 9

Diffusion in solids - Fick's law - - Isothermal transformation diagrams – cooling curves
superimposed on I.T. diagram CCR - Types and stages of annealing, stress relief, recrystallisation
and spheroidizing – normalizing, Hardenability, Jominy end quench test - hardening and
tempering of steel –Cryotreatment, Austempering, martempering – case hardening, carburizing,
nitriding cyaniding, carbonitriding – Flame, Induction Laser and Electron beam and plasma phase
hardening, Special and Duplex surface hardening processes - residual stress - Age hardening -
Sintering- indentation (macro, micro and nano) for evaluation of hardness.

UNIT III NON FERROUS METALS 9

Specification, Properties and application: Copper and Copper alloys, Brass, Bronze and
Cupronickel – Aluminium alloys and AI-Cu –precipitation strengthening treatment – Bearing alloys,
Alloys of Titanium, Zinc, Magnesium and Nickel –Intermetallics - Ni, Ti Aluminides – Refractory
alloys- Superalloys- Shape memory alloys- high entropy alloys- Bulk Metallic glasses- Basics of
Inductively Coupled Plasma (ICP)- Optical Emission Spectrometry (OES) analytical technique for
elemental analysis.

UNIT IV DEFORMATION AND FAILURE OF METALS 9

Elastic, anelastic and viscoelastic behaviour - Dislocation in FCC,BCC,HCP – stress field -
interaction between dislocations -Strengthening mechanism- effect of temperature- deformation
mechanism maps - cyclic loading - Types of Fracture – Fracture mechanics - fracture toughness
ductile-brittle transition - types of wear - corrosion - Basics of Scanning electron microscope
(SEM)- Energy Dispersive Spectroscopy (EDS)- Failure analysis

UNIT V TESTING OF MATERIALS 9

Testing of materials under tension, compression and shear- Fatigue -effect of metallurgical and
design factors- low cyclic and high cyclic fatigue - NDE Technologies for Fatigue Crack Detection -
Creep-Stress Rupture test - Predication of long time properties- creep-fatigue interaction- Wear
Testing- Corrosion Testing -ASTM standard- Basics of X – Ray diffraction(XRD) techniques –
determination of phases - crystal structure -lattice parameters and residual stress measurement .
TOTAL: 45 PERIODS
OUTCOMES:
 Student shall have knowledge in understanding constitution of ferrous and non ferrous
alloys, their properties and application.
 Student understand the mechanical behaviour of materials under different condition and
evaluation by various testing methods and characterization tools.

TEXT BOOKS:
1. Donald R. Askeland, Pradeep P. Fulay and Wendelin J. Wright, “The Science and
Engineering of Materials”, 6th Edition, Cengage Learning, Inc. 2010.
2. Kenneth G.Budinski and Michael K.Budinski ,”Engineering Materials”, 9th Indian Reprint,
Prentice-Hall of India Private Limited, 2009.

REFERENCES:
1. Sidney H. Avner, “Introduction to Physical Metallurgy”, McGraw Hill Book Company, 2nd
Edition, 2008.
2. Raghavan V., “Materials Science and Engg: A first Course”, 6th Edition, Prentice Hall of
India Pvt Ltd., 5th edition, 2004.
3. Dieter. G.E., “Mechanical Metallurgy”, McGraw-Hill, 5th Edition, 2012.
4. Culity B.D., Stock S.R. and Stock S., “Elements of X-ray diffraction”, PHI, 4th edition, 2005
5. Yang Leng, “Materials Characterization: Introduction to Microscopic and Spectroscopic
Methods”, John Wiley and Sons,2nd edition, 2013.

42
EI7313 ELECTRICAL, ELECTRONICS AND CONTROL SYSTEMS L T P C
LABORATORY 0 0 4 2

OBJECTIVES:
 Exposed to important characteristics of electrical machines.
 Will be in a position to design oscillators, signal generators using operational amplifiers.
 Able to handle measuring instruments for measuring electrical parameters.

LIST OF EXPERIMENTS
1. Load test on single phase transformer.
2. Load test on D.C Shunt motor.
3. Load test on generator.
4. Load test on three phase Induction motor.
5. Speed control of DC Shunt motor.
6. Verification of Ohm’s law and Kirchhoff’s laws.
7. Construction of Amplifier using Operational amplifiers.
8. Construction of Sinusoidal oscillators using Operational amplifiers.
9. Construction of Square wave generators using Operational amplifiers.
10. Realization of logic gates circuits.
11. Measurement of various electrical parameters using C .R.O.
12. Experiments with virtual instruments.
TOTAL: 60 PERIODS
OUTCOMES:
 Able to obtain and analyze the characteristics of electrical machines
 Ability to design and analyze electronic circuits using operational amplifiers
 Able to understand the basic of logic gates.
 Will be in a position to select proper measuring instruments for basic electrical and
electronics applications.

PR7311 METALLURGY AND MATERIALS TESTING LABORATORY L T P C

0 0 4 2
OBJECTIVES:
• To study the testing methods and quantifying techniques for the mechanical properties
of engineering materials.
• To gain practical knowledge in Microstructural analysis of various steels, Cast iron, Non
ferrous Materials and Heat Treated steels.

LIST OF EXPERIMENTS
1. Cooling curve- Pure metal and alloy (Pb-Sn).
2. Specimen preparation for macro – examination.
3. Specimen preparation for micro examination (steel/cast iron/non-ferrous alloys).
4. Quantitative metallography – Estimation of volume fraction, particle size, shape and
distribution.
5. Heat treatments of Steel-Micro structural study: Annealing/ Normalising / Quench Hardening/
Tempering.
6. Jominy End Quench Test.
7. Tension test of mild steel.
8. Torsion test of mild steel.
9. Impact test- Izod and Charpy.
10. Hardness test – Vickers /Brinell.
11. Compression test for Helical spring.
12. Fatigue test
43
13. Creep test.
14. Pin on Disc Wear test.
TOTAL: 60 PERIODS
OUTCOMES:
 Awareness of procedure and methods of testing materials for evaluation of mechanical
properties.
 Experience in metallographic techniques and familiarization of microstructure of typical
ferrous and non ferrous alloys.

GE7251 ENVIRONMENTAL SCIENCE AND ENGINEERING L T P C

3 0 0 3
OBJECTIVES:
To the study of nature and the facts about environment.
 To find and implement scientific, technological, economic and political solutions to
environmental problems.
 To study the interrelationship between living organism and environment.
 To appreciate the importance of environment by assessing its impact on the human world;
envision the surrounding environment, its functions and its value.
 To study the dynamic processes and understand the features of the earth’s interior and
surface.
 To study the integrated themes and biodiversity, natural resources, pollution control and
waste management.

UNIT I ENVIRONMENT, ECOSYSTEMS AND BIODIVERSITY 14

Definition, scope and importance of environment – need for public awareness - concept of an
ecosystem – structure and function of an ecosystem – producers, consumers and decomposers –
energy flow in the ecosystem – ecological succession – food chains, food webs and ecological
pyramids – Introduction, types, characteristic features, structure and function of the (a) forest
ecosystem (b) grassland ecosystem (c) desert ecosystem (d) aquatic ecosystems (ponds, streams,
lakes, rivers, oceans, estuaries) – Introduction to biodiversity definition: genetic, species and
ecosystem diversity – biogeographical classification of India – value of biodiversity: consumptive
use, productive use, social, ethical, aesthetic and option values – Biodiversity at global, national and
local levels – India as a mega-diversity nation – hot-spots of biodiversity – threats to biodiversity:
habitat loss, poaching of wildlife, man-wildlife conflicts – endangered and endemic species of India –
conservation of biodiversity: In-situ and ex-situ conservation of biodiversity.
Field study of common plants, insects, birds
Field study of simple ecosystems – pond, river, hill slopes, etc.

UNIT II ENVIRONMENTAL POLLUTION 8

Definition – causes, effects and control measures of: (a) Air pollution (b) Water pollution (c)Soil
pollution (d) Marine pollution (e) Noise pollution (f) Thermal pollution (g) Nuclear hazards– soil
waste management: causes, effects and control measures of municipal solid wastes – role of an
individual in prevention of pollution – pollution case studies – disaster management: floods,
earthquake, cyclone and landslides.
Field study of local polluted site – Urban / Rural / Industrial / Agricultural.

UNIT III NATURAL RESOURCES 10

Forest resources: Use and over-exploitation, deforestation, case studies- timber extraction,
mining, dams and their effects on forests and tribal people – Water resources: Use and over-
utilization of surface and ground water, floods, drought, conflicts over water, dams-benefits and
problems – Mineral resources: Use and exploitation, environmental effects of extracting and using
mineral resources, case studies – Food resources: World food problems, changes caused by
agriculture and overgrazing, effects of modern agriculture, fertilizer-pesticide problems, water
logging, salinity, case studies – Energy resources: Growing energy needs, renewable and non
44
renewable energy sources, use of alternate energy sources. case studies – Land resources: Land
as a resource, land degradation, man induced landslides, soil erosion and desertification – role of
an individual in conservation of natural resources – Equitable use of resources for sustainable
lifestyles.
Field study of local area to document environmental assets – river / forest / grassland / hill /
mountain.

UNIT IV SOCIAL ISSUES AND THE ENVIRONMENT 7

From unsustainable to sustainable development – urban problems related to energy –
water conservation, rain water harvesting, watershed management – resettlement and
rehabilitation of people; its problems and concerns, case studies – role of non-governmental
organization- environmental ethics: Issues and possible solutions – climate change, global
warming, acid rain, ozone layer depletion, nuclear accidents and holocaust, case studies. –
wasteland reclamation – consumerism and waste products – environment production act– Air
(Prevention and Control of Pollution) act – Water (Prevention and control of Pollution) act –
Wildlife protection act – Forest conservation act – enforcement machinery involved in
environmental legislation- central and state pollution control boards- Public awareness.

UNIT V HUMAN POPULATION AND THE ENVIRONMENT 6

Population growth, variation among nations – population explosion – family welfare programme –
environment and human health – human rights – value education – HIV / AIDS – women and
child welfare – role of information technology in environment and human health – Case studies.
TOTAL : 45 PERIODS

OUTCOMES:
Environmental Pollution or problems cannot be solved by mere laws. Public participation is an
important aspect which serves the environmental Protection. One will obtain knowledge on the
following after completing the course.
 Public awareness of environment at infant stage.
 Ignorance and incomplete knowledge has lead to misconceptions.
 Development and improvement in standard of living has lead to serious environmental
disasters.
TEXT BOOKS:
1. Gilbert M.Masters, ‘Introduction to Environmental Engineering and Science’, 2nd edition,
Pearson Education 2004.
2. Benny Joseph, ‘Environmental Science and Engineering’, Tata McGraw-Hill, New Delhi,
2006.

REFERENCES:
1. R.K. Trivedi, ‘Handbook of Environmental Laws, Rules, Guidelines, Compliances
and Standards’, Vol. I and II, Enviro Media.
2 . Cunningham, W.P. Cooper, T.H. Gorhani, ‘Environmental Encyclopedia’,Jaico
Publ., House, Mumbai, 2001.
3. Dharmendra S. Sengar, ‘Environmental law’, Prentice hall of India PVT LTD,New Delhi,
2007.
4. Rajagopalan, R, ‘Environmental Studies-From Crisis to Cure’, Oxford University Press
2005.

45
PR7401 FOUNDRY AND WELDING TECHNOLOGY L T P C
3 0 0 3
OBJECTIVE:
 To understand the principle, procedure and applications of Foundry and Welding.

UNIT I CASTING PROCESSES 9

Introduction to casting – pattern – materials allowances – coding – types – moulds – mould
making, sand – properties, types and testing of sands – core making – type of cores – single box,
two box and three box moulding processes, runner, riser and gate and chills chaplets..

UNIT II SPECIAL CASTING PROCESSES 9

Pressure die casting – Centrifugal – continuous – investment – shell moulding – squeeze – electro
slag casting – CO2 moulding – Plaster Mould castings – Antioch process – Slush casting- Counter
gravity low pressure casting - electro-magnetic casting.

UNIT III METAL JOINING PROCESSES 9

Introduction to soldering, brazing and welding Types of joints – plane of welding – edge
preparation – filler material – flux – shielding gases – fusion welding – gas welding – flame types
– Manual arc welding – arc theory – power supply – braze welding – Thermit welding – Resistance
welding – spot, seam, projection, percussion and flash.

UNIT IV SPECIAL WELDING PROCESSES 9

Shielded Metal Arc welding, Gas Metal Arc Welding-Gas Tungsten Arc Welding – Submerged arc
welding – Flux Cored Arc Welding – Electro slag welding – friction welding – explosive welding –
Underwater welding – Diffusion bonding – EBW – LBW – PAW – Stud welding – welding of
dissimilar materials – Friction stir welding – High frequency induction welding.

UNIT V TESTING OF CASTINGS AND WELDMENTS 9

Causes and remedies for casting defects – welding defects – Destructive testing – Non
Destructive Testing (NDT) methods– Testing: Dye penetrant – magnetic particle – X-ray -
Radiography - ultrasonic - Case studies in testing of welded joints and castings.
TOTAL:45 PERIODS
OUTCOME:
 Students shall gain knowledge on foundry and welding techniques.

TEXT BOOK:
1. Jain .P.L., “Principle of Foundry Technology” , Tata McGraw Hill ,4th edition, 2004.
2. Parmer .R.S , “Welding Engineering and Technology”, Khanna Publishers , 2004.

REFERENCES:
1. Curry .B. , “Modern Welding Technology” , Prentice Hall ,2008.
2. Taylor HF Fleming, “Foundry Engineering”, M.C. and Wiley Eastern Ltd., 2003.
3. Little, “Welding Technology”, Tata McGraw Hill, 2008.
4. Heime, Looper and Rosenthal , “Principle of metal casting” , Tata McGraw Hill, 2 nd edition
2002.

46
PR7402 METAL CUTTING AND CNC TECHNOLOGY L T P C
3 0 0 3
OBJECTIVES:
 To understand the theory of metal cutting.
 To understand the concepts of gear manufacture.
 To understand the constructional and operational features of CNC machines and
programming.

UNIT I TOOL MATERIAL, TOOL WEAR AND TOOL LIFE 9

Tool materials – Properties – Types - Selection of tool materials - Machinability – types of chips –
cutting fluids – Types - Tool wear – Types – Mechanisms of tool wear - Tool life – Illustrative
Problems.

UNIT II MECHANICS OF METAL CUTTING 9

Tool Nomenclature - Single point and multi point cutting tools – Orthogonal cutting and oblique
cutting – Chip thickness ratio - Merchant circle diagram – Force relationships - shear angle - shear
stress - shear strain – velocity relationships – Illustrative Problems – Force Measurement -
Dynamometers – Thermal aspects of machining - Temperature measurement.

UNIT III GEAR MANUFACTURING 9

Methods of gear manufacture – Gear Generation Methods; Gear shaping - gear planning - gear
hobbing – kinematics - Bevel gear generation – Gear finishing methods – burnishing - shaving –
grinding - lapping and gear honing.

UNIT IV CNC MACHINES 9

Overview of NC, CNC and DNC – Types of CNC machines – Constructional features of CNC
machines - Work and Tool holding devices - feedback devices – Tooling of CNC Machines –
Machining center – Turning center – Turn mill center.

UNIT V CNC PROGRAMMING 9

Manual part programming – sample programs for lathe and milling – Canned cycles - Computer
aided part programming - CAM packages.
TOTAL: 45 PERIODS
OUTCOME:
 The students will gain and apply the knowledge on the concepts of metal cutting and to
programme CNC machines.

TEXT BOOKS:
1. Juneja.B.L., Sekhon.G.S., Niting Seth, “Fundamentals of Metal Cutting and Machine Tools”,
New Age International Publishers, 2007.
2. Jonathan Lin. S.C., “Computer Numerical Control from Programming to Networking”, Delmar
Publishers, 3rd edition 2009.

REFERENCES:
1. Groover, M.P., "Automation, Production Systems and Computer Integrated Manufacturing”,
Prentice Hall, 2006.
2. Thyer. G.E., “Computer Numerical Control of Machine Tools”, BH, Newners, 2007.
3. Hajra Choudhury C.J., “Elements of Workshop Technology”, Vol.I and Vol.II, Asia Publishing
House, 2009.
4. Nagpal G.R., “Machine Tool Engineering”, Khanna Publishers, 2011.
5. Geoffrey Boothroyd, Winston A. Knight , “Fundamentals of Machining and Machine Tools”
2015.

47
PR7403 METAL FORMING PROCESSES L T P C
3 0 0 3
OBJECTIVE:
 To understand the principle, procedure and application of Bulk Metal Forming and Sheet
Metal Forming.

UNIT I FUNDAMENTALS OF METAL FORMING 9

State of stress – Components of stress, symmetry of stress tensor, principle stresses – Stress
deviator – Von-Mises, Tresca yield criteria – Octahedral shear stress and shear strain theory –
Flow stress determination – Temperature in metal forming – Hot, cold and warm working – strain
rate effects – metallurgical structures – residual stresses – Spring back.

UNIT II FORGING AND ROLLING 9

Principle – classification – equipment – tooling – processes parameters and calculation of forces
during forging and rolling processes – Ring compression test – Post forming heat treatment –
defects causes and remedies – applications – Roll forming.

UNIT III EXTRUSION AND DRAWING PROCESSES 9

Classification of extrusion processes – tool, equipment and principle of these processes –
influence of friction – extrusion force calculation – defects, causes and remedies – Rod / Wire
drawing – tool, equipment and principle – defects – Tube drawing and sinking processes –
Mannessmann process of seamless pipe manufacturing – Tube bending.

UNIT IV SHEET METAL FORMING PROCESSES 9

Classification – conventional and High Energy Rate Forming processes – presses – types and
selection of presses – formability studies – Formability Limit Diagram, Limiting Draw ratio –
processes: Deep drawing, spinning, stretch forming, plate bending, Rubber pad forming, bulging
and press brake forming – Explosive forming, electro hydraulic forming, Magnetic pulse forming
and Super plastic forming.

UNIT V POWDER FORGING AND RECENT ADVANCES 9

Metal Powder and fabrication procedures, Applications, Preparation of powders, Compaction and
sintering, Yield criteria and flow rules, Hot and cold pressing – Electro forming – fine blanking –
Hydro forming – Peen forming – Laser Forming – Micro forming – Isothermal forging – high speed
for forging and extrusion near net shape forming – Ultra fine grained materials by severe plastic
deformation CAD and CAM in forming.
TOTAL: 45 PERIODS
OUTCOME:
 The course shall enable student to understand forming of bulk metal, sheet and powder
and tools and design for manufacturing

TEXT BOOKS:
1. Dieter G.E., “Mechanical Metallurgy”, McGraw Hill, Co., S.I. 5th Edition, 2012.
2. Nagpal G.R. ,”Metal forming processes”, Khanna Publishers, New Delhi, 2nd edition 2009.

REFERENCES:
1. Serope Kalpakjian, Steven R Schmid, “Manufacturing Process for Engineering Materials”,
Pearson Education, 7th Edition, 2007.
2. Rao, P.N., “Manufacturing Technology”, TMH Ltd., 3rd edition, 2014.
3. Edward M. Mielink, “Metal working science engineering”, McGraw Hill, Inc, 2007
4. Metal Hand book Vol 14, “Forming and Forging”, Metal Park, Ohio, USA, 2006.

48
PR7451 KINEMATICS AND DYNAMICS OF MACHINES LT P C
4 0 0 4
OBJECTIVE:
 To understand the basic concepts of mechanisms and machinery.

UNIT I MECHANISMS 12
Definition – Machine and Structure – Kinematic link, pair and chain – classification of Kinematic
pairs – Constraint and motion – Degrees of freedom - Slider crank – single and double – Crank
rocker mechanisms – Inversions, applications – Introduction to Kinematic analysis and synthesis
of simple mechanisms – Determination of velocity and acceleration of simple mechanisms.

UNIT II FRICTION 12
Types of friction – friction in screw and nut – screw jack – pivot, collar and thrust bearings – plate
and cone clutch – belt (Flat and V) and rope drives – creep in belts – open and crossed belt drives
– Ratio of tensions – Effect of centrifugal and initial tensions – condition for maximum power
transmission.

UNIT III GEARS AND CAMS 12

Gear – Types and profile – nomenclature of spur and helical gears – laws of gearing – interference
– requirement of minimum number of teeth in gears – gear trains – simple, compound and
reverted gear trains – determination of speed and torque in epicyclic gear trains – cams different
types of followers – Cam – Types of cams and followers – Cam design for different follower
motions.

UNIT IV VIBRATION 12
Free, forced and damped vibrations of single degree of freedom systems – force transmitted to
supports – vibration Isolation – vibration absorption – torsional vibration of shafts – single and
multirotor systems – geared shafts – critical speed of shafts.

UNIT V BALANCING 12
Static and dynamic balancing – single and several masses in different planes – primary and
secondary balancing of reciprocating masses – Balancing of single and multi cylinder engines –
Governors and Gyroscopic effects.
TOTAL:60 PERIODS
OUTCOME:
 The student shall be able to apply the kinematics and dynamics of machinery in design and
analysis of engineering problems.
TEXT BOOKS:
1. Bansal R.K., “Theory of Machines”, Laxmi Publications Pvt Ltd., New Delhi, 20th edition 2009.
2. Rattan S.S., “Theory of machines”, Tata McGraw Hill publishing Co., New Delhi, 2nd edition
2011.

REFERENCES:
1. Rao J.S. and Dukkipati R.V., “Mechanism and Machine Theory”, Second Edition, Wiley
Eastern Limited, 2006.
2. Malhotra D.R. and Gupta H.C , “The Theory of machines”, Satya Prakasam, Tech. India
Publications, 2008.
3. Gosh A and Mallick A.K., “Theory of Machines and Mechanisms”, Affiliated East West press,
2009.
4. Shigley J.E. and Uicker J.J., “Theory of Machines and Mechanisms”, McGraw Hill, 2006.

49
PR7452 QUANTITATIVE TECHNIQUES IN MANAGEMENT L T P C
4 0 0 4
OBJECTIVE:
 To introduce the various quantitative techniques and optimization techniques and to make
the students apply these techniques for modeling and solving many engineering situations
in general and manufacturing situations in particular.

UNIT I LINEAR PROGRAMMING 12

Problem formulation - Graphical method – simplex method – Special cases – transportation and
assignment method – applications.

UNIT II REPLACEMENT MODELS AND GAME THEORY 12

Basic replacement model – individual and group replacement problems – applications – game
theory – terminology – decision criteria – solution to a 2 x 2 and 2 x n games – applications of LP
in game theory – applications.

UNIT III QUEUING MODELS AND SIMULATION 12

Elements of queue – queue discipline – Poisson arrival and exponential service – queue length –
waiting time – steady state conditions – applications – concept of simulation – Monte Carlo method
– applications.

UNIT IV FORECASTING, SEQUENCING AND LINE BALANCING 12

Forecasting – purpose – methods – measures of forecast error; scheduling – priority rules -
sequencing – methods of sequencing – Johnson’s rule – Heuristic approach, line balancing –
applications.

UNIT V PROJECT NETWORK ANALYSIS AND DECISION TREE ANALYSIS 12

Network – CPM/PERT – Project time estimation – critical path – crashing of network, Decision tree
analysis – applications
TOTAL: 60 PERIODS
OUTCOME:
 The students shall able to select and apply techniques for typical engineering and industrial
situations.

TEXT BOOKS:
1. Panneerselvam R., “Operation Research”, Prentice Hall of India, 2008.
2. Hamdy A.Taha, “Operations Research – An Introduction”, Prentice Hall of India, 8th edition
2008.

REFERENCES:
1. Guptha. P.K. and Man-Mohan, “Problems in Operations Research”, Sultan chand and Sons,
2014.
2. Monks. J.G, “Operations Management theory and Practice”, McGraw Hill, 2nd edition 1996.
3. Ravindran, Philips and Sojberg, “Operations Research Principles and Practice”, John Wiley
and Sons, Singapore, 2nd edition,2007.
4. Sharma J.K., “Operations Research Theory and Applications”, Macmillan India Ltd., 4th edition,
2009.

50
PR7411 METAL CUTTING AND CNC LABORATORY L T P C
0 0 4 2
OBJECTIVES:
 To familiarize metal cutting principles.
 To train the students to write, simulate and carry out various operations in CNC machines.

LIST OF EXPERIMENTS
1. Tool life study on a single point turning tool.
2. Measurement of cutting forces in turning using lathe tool dynamometer.
3. Acceptance test on RAM type milling machine as per ISI test chart and Measurement of tool
angles.
4. Temperature measurement in machining.
5. Spur Gear generation using gear shaper.
6. Programming and machining of step turning and taper turning operation in CNC Lathe.
7. Programming and machining of thread cutting and grooving operation in CNC Lathe.
8. Programming and simulation for canned cycle in CNC lathe.
(i) Stock removing in facing cycle.
(ii) Stock removing in turning cycle.
(iii) Grooving cycle.
(iv) Thread cutting cycle.
9. Programming for milling operations in a CNC milling simulation.
10. Programming for mirroring / scaling function / Pocket milling and drilling cycle in a CNC
milling.
11. Programming for spur gear cutting operation and Programming for hexagonal cutting
operation.
12. Programming and Simulation in CNC Router.
TOTAL: 60 PERIODS
COURSE OUTCOME:
 The students will be able to use dynamometers to measure the cutting forces, cut gears
and they will be able to programme in CNC machines.

PR7412 METAL FORMING, FOUNDRY AND WELDING LABORATORY L T P C

0 0 4 2
OBJECTIVE:
 To familiarize the students with test procedures followed in forming and in foundry and also
to practice various types of welding processes.

LIST OF EXPERIMENTS:
METAL FORMING LABORATORY
1. Construction Flow Stress – Strain curve.
2. Erichsen cupping Test.
3. Determination of interface friction factor using ring compression test.
4. Construction of FLD of a sheet metal.
5. Water hammer forming.
6. Determination of Power consumption in sheet rolling process and wire drawing process.
7. Determination of strain rate sensitivity index of given specimen.
8. Superplastic forming studies on Pb-Sn alloys.
9. Deep drawing.
10. Forward Extrusion process.
11. Micro-forming.
12. Simulation studies on metal forming.

51
WELDING
1. Welding of basic joints using gas and arc welding.
2. Welding of pipes in different positions.
3. GTAW / GMAW of ferrous and non - ferrous metals.
4. Spot welding of plates.
5. Brazing practice – Dissimilar metals.
6. Welding of standard grill structures.

FOUNDRY
1. Green and Dry Strength of Moulding sand.
2. Permeability testing.
3. Determining the clay content.
4. Sieve analysis of dry silica sand.
5. Determining the moisture content.
6. Melting any non-ferrous metal and making simple castings – Demonstration.
TOTAL:60 PERIODS
COURSE OUTCOME:
 The students would gain practical knowledge on Metal forming, Welding and Foundry.

PR7501 ENGINEERING METROLOGY L T P C

3 0 0 3
OBJECTIVES:
 To understand the concept of Engineering metrology.
 To learn about metrology instruments and application for various measurements.
 To introduce the concepts of computer applications in metrology.

UNIT I FUNDAMENTALS OF MEASUREMENT 9

Definition of Engineering metrology – Line, end and wave length standards of measurement –
Errors in measurements – Limits, fits, tolerance and guage design – Inter changeability and
selective assembly – Accuracy, precision and Calibration of instruments – Light interference and
interferometry – Measurement of absolute length using interferometers.

UNIT II LINEAR AND ANGULAR MEASURING SYSTEMS 9

Linear and Angular measuring systems. Slip gauges, micrometers, verniers, dial gauges and
surface plates – Concept of comparators mechanical, electrical, optical and pneumatic
comparators – Angular measuring systems – angle gauges – Sine bar – Precision spirit level, Auto
collimators – Angle dekkor – Clinometers – Straightness and flatness measurement using
precision level and auto collimators.

UNIT III MEASUREMENT OF SURFACE TEXTURE AND MEASURING INSTRUMENTS 9

Surface texture – Definitions – types of surface texture – surface texture measurement methods
Comparison – Profilometer – Surface texture measuring instruments – Measurement of run-out
and concentricity straightness, flatness and alignment errors – Tool makers microscope – Optical
and Laser Alignment telescope – Metroscope.

UNIT IV METROLOGY OF SCREW THREADS AND GEARS 9

Metrology of screw threads and gears Internal and external screw threads – terminology -
measurement of various elements of screw threads – thread micrometer two wire and three wire -
methods, gear terminology measurement of various elements of gears pitch circle method,
constant chord method, base tangent method – plug method – Rolling gear tester.

52
UNIT V LASER METROLOGY AND COMPUTER AIDED METROLOGY 9
Co-ordinate measuring machines – Probe sensors – Errors – Environmental factors – Laser
micrometer Laser interferometer – Testing of geometric features of machine tools using laser
interferometer – non contact and in-process inspection using laser – machine tool metrology –
vision systems – Atomic force microscope - Scanning tunneling microscope.
TOTAL: 45 PERIODS
OUTCOMES:
 Students will be able to understand the principles of measuring equipments.
 Students will be able to identify appropriate metrology equipments.

TEXT BOOKS:
1. Jain.R.K., “Engineering Metrology”, Khanna Publishers, 20th edition, 2009.
2. Rajput R.K., “Engineering Metrology and Instrumentation”, Kataria and Sons Publishers, 2013.

REFERENCES:
1. Gupta.I.C., “A text book of Engineering Metrology”, Dhanpat Rai and Sons, 7th edition 2012.
2. Gayler G.N. and Shotbolt C.R., “Metrology for Engineers”, ELBS 2000.
3. “ASTE Hand book of Industrial Metrology”, Prentice Hall of India Limited 2002.

PR7502 FLUID POWER SYSTEMS L T PC

3 0 0 3
OBJECTIVES:
 To understand the working principle of hydraulic and pneumatic components and its
selection.
 To design hydraulic and pneumatic circuits for different applications.

UNIT I BASICS OF FLUID POWER 9

Introduction to fluid power controls – Hydraulics and pneumatics – Selection criteria, Application
of Fluid power, Application of Pascal’s Law, Transmission and multiplication of force – Pressure
Losses – Fluids, selection and properties – Gas laws- properties of air with pressure and
temperature - ISO symbols.

UNIT II FLUID POWER SOURCES 9

Fluid Power drives – Pumps – working principle and construction details of Gear, vane and piston
pumps, Hydraulic motors, Hydrostatic transmission drives and characteristics, Hydraulic supply
components Pneumatic power supply – compressors, air distribution, air motors.

UNIT III FLUID POWER ACTUATORS AND ELEMENTS 9

Control valves – pressure, flow, direction - working principle and construction – Special type -
valves – Cartridge, modular, proportional, and servo – Selection and actuation methods.
Actuators – Selection and specification, cylinders, mounting, cushioning, pipe fittings – Fluid
conditioning elements – Accumulators- Intensifier.

UNIT IV HYDRAULIC AND PNEUMATIC CIRCUITS DESIGN 9

Regenerative, speed control, synchronizing circuits -Design of Hydraulic and pneumatic circuits for
automation, selection and specification of circuit components, sequencing circuits, cascade, and
Karnaugh – Veitch map method – Circuits for industrial application - grinding, milling, shaping,
press, material handling, etc

UNIT V ELECTRO PNEUMATICS AND PLC CIRCUITS 9

Moving part logic circuits - Use of electrical timers, switches, solenoid, relays, proximity sensors etc.
electro pneumatics sequencing Ladder diagram – PLC – elements, functions and selection – PLC
programming– Ladder and different programming methods - Sequencing circuits.
TOTAL: 45 PERIODS

53
OUTCOMES:
 Students will acquire knowledge on working principle of pump, actuators, control elements
etc of fluid power system
 Students will be capable to design circuit for typical applications like material handling,
press, shaping, milling, grinding, etc.

TEXT BOOKS:
1. Anthony Esposito, “Fluid power with applications”, Pearson education, 7th edition, 2014.
2. Srinivasan R, “Hydraulics and Pneumatic Controls”, Vijay Nicole Imprints, 2nd edition, 2008.

REFERENCES:
1. William W.Reaves, “Technology of Fluid Power”, Delmer Publishers, 2007.
2. Peter Rohner, “Fluid Power Logic circuit Design”, Macmillan Press Ltd., 2000.
3. Andrew Parr, “Hydraulics and Pneumatics”, Jaico Publishing House,3rd edition, 2011.
4. Majumdar, “Oil hydraulics: Principles and Maintenance”, Tata McGraw Hill,13th edition,
2006.
5. Majumdar, “Pneumatic system: Principles and Maintenance”, Tata McGraw Hill, 7th edition
2008.
6. Jagadeesha T, "Pneumatics:Concepts, Design and Applications", University Press, 2015

PR7503 MACHINE COMPONENTS DESIGN L T P C

4 0 0 4
OBJECTIVE:
 To introduce the students the design and theory of common machine elements and to give
experience in solving design problems.

UNIT I INTRODUCTION 12
Fundamentals of Machine Design-Engineering Design, Phases of Design, Design Consideration -
Standards and Codes - Selection of Materials –Design against Static and Dynamic Load –Modes
of Failure, Factor of Safety, Principal Stresses, Theories of Failure-Stress Concentration, Stress
Concentration Factors, Variable Stress, Fatigue Failure, Endurance Limit, Design for Finite and
Infinite Life, Soderberg and Goodman Criteria.

UNIT II JOINTS 12
Design of Bolts under Static Load, Design of Bolt with tightening / Initial Stress, Design of Bolts
subjected to Fatigue – Keys -Types, Selection of Square and Flat Keys-Design of Riveted Joints
and Welded Joints.

UNIT III SHAFTS, COUPLINGS AND BRAKES 12

Design of Shaft –Static and Varying Loads, Strength and Rigidity- Design of Coupling-Types,
Flange, Muff and Flexible Rubber Bushed Coupling-Design of Brakes-Block and Band Brakes.

UNIT IV GEARS AND BELT DRIVES 12

Design of Spur, Helical, Bevel and Worm Gear drives- Design of Belt drives- Flat and V Belts.

UNIT V SPRINGS AND BEARINGS 12

Design of Helical Spring-Types, Materials, Static and Variable Loads- Design of Leaf Spring-
Design of Journal Bearing -Antifriction Bearing-Types, Life of Bearing, Reliability Consideration,
Selection of Ball and Roller Bearings.
TOTAL:60 PERIODS
OUTCOME:
 Enable student to design and validate typical components of machines

54
TEXT BOOKS:
1. Sundararajamoorthy T. V, Shanmugam .N, "Machine Design", Anuradha Publications,
2015.
2. Prabhu. T.J., “Design of Machine Elements”, Kasthuri Publications, Chennai, 2003.

REFERENCES:
1. Joseph Edward Shigley, Charles R. Mischke, “Mechanical Engineering Design”, McGraw
Hill, International Edition, 4th edition 2011.
2. Bhandari. V.B., “Design of Machine Elements”, Tata McGraw-Hill Publishing Company
Limited, 3rd edition, 2010.
3. Robert L.Norton, “Machine Design – An Integrated Approach”, Prentice Hall International
Edition, 5th edition, 2013.
4. Jalaludeen. S.Md., “Machine Design Vol - I & Vol - II”, Anuradha publications,2006.
5. “P.S.G.Design Data Hand Book”, PSG College of Tech Coimbatore.
6. Robert C. Juvinall and Kurt M Marshek , “Fundamentals of Machine Component Design”,
Wiley India Pvt. Ltd., New Delhi, 3rd Edition, 2007.
7. Sharma. C.S. and Kamlesh Purohit, “Design of Machine Elements”, Prentice Hall of India
Private Limited,1st edition, 2006

PR7551 STATISTICAL QUALITY CONTROL AND RELIABILITY ENGINEERING L T P C

3 0 0 3
OBJECTIVES:
 To impart the knowledge of the quality control, control charts and application and
construction of various quality control charts and the selection.
 To study the significance of design of experiments and its application.
 To train the students in the field of reliability and its estimation.

UNIT I STATISTICAL PROCESS CONTROL 9

Quality control – Definition – Quality Assurance Variation in process – Factors – control charts –
variables XR and Xσ, - Attributes P, C and U-Chart Establishing and interpreting control charts
process capability – Quality rating – Short run SPC.

UNIT II ACCEPTANCE SAMPLING 9

Lot by lot sampling types – probability of acceptance in single, double, multiple sampling plans –
OC curves – Producer’s risk and consumer’s risk. AQL, LTPD, AOQ, AOQL, Concepts Design of
sampling plan – single, double, multiple- standard sampling plans for AQL and LTPD – Use of
standard sampling plans – Sequential sampling plan.

UNIT III EXPERIMENTAL DESIGN AND TAGUCHI METHOD 9

Fundamentals – fractional, factorial experiments – random design, Latin square design – Taguchi
method –Quality Loss function – experiments – S/N ratio and performance measure – Orthogonal
array.

UNIT IV RELIABILITY AND ITS PREDICTION 9

Life testing – Failure characteristics – Meantime to failure – maintainability and availability –
reliability – system reliability – OC curves – reliability improvement techniques – Reliability testing
techniques – Pareto analysis. MTBF, MTTF, MTTR – System reliability – OC curve Availability
and Maintainability – Reliability Improvement techniques.

UNIT V FAILURE DATA ANALYSIS 9

Real time distribution, exponential,normal, log normal, gamma and weibull – reliability data
requirements – Graphical evaluation.
TOTAL: 45 PERIODS

55
OUTCOME:
 Enable student to apply tools of statistics in analysis of experiments and data of industrial
management interest.

TEXT BOOKS:
1. Amitava Mitra, “Fundamentals of Quality Control and Improvement”, Pearson Education
Asia, Delhi 2002.
2. Modares, “Reliability and Risk Analysis”, Marcel Decker Inc. 4th edition 2014.

REFERENCES:
1. Besterfield D.H., “Quality Control”, Prentice Hall, 3rd edition 2011.
2. Manohar Mahajan, “Statistical Quality Control”, Dhanpat Rai and Sons, 2007.
3. Sharma S.C., “Inspection Quality Control and Reliability”, Khanna Publishers, 1998.

PR7511 FLUID POWER SYSTEMS LABORATORY L T PC

0 0 4 2
OBJECTIVES:
• To study the functional aspects of different pneumatic and hydraulic Components and its
use in circuits.
• To train the student in designing different pneumatic and hydraulic circuits for different
applications.
LIST OF EXPERIMENTS
1. Study and use of pneumatic and hydraulic elements.
2. Simulation of speed control circuits in a hydraulic trainer.
3. Simulation of hydraulic circuits in a hydraulic trainer.
4. Simulation of single and double acting cylinder circuits using different directional control
valves.
5. One shot and regenerative pneumatic circuits.
6. Sequencing of pneumatic circuits.
7. Simulation of Electro-pneumatic circuits.
8. Simulation of Logic pneumatic circuits.
9. Simulation of electro pneumatic sequencing circuits.
10. Simulation of PLC based electro pneumatic sequencing circuits.
11. Simulation of pneumatic circuits using PLC.
12. Design and simulate the circuits for the given applications.
13. Simulation of ladder diagram for electrical and PLC control for the given sequence.
14. Simulation of circuit for the given sequence using software.
TOTAL: 60 PERIODS
OUTCOMES:
 Hands on experience in handling various components of fluid power systems
 Ability to design circuit for desired sequence of practical application by pneumatics,
electropneumatics and PLC.

56
PR 7512 METROLOGY AND QUALITY CONTROL LABORATORY L T P C
0 0 4 2
OBJECTIVE:
 To practice various measurement methods and to introduce quality control tools.

LIST OF EXPERIMENTS
1. Measurement of angle using Sine bar/bevel protractor.
2. Measurement of external taper angle.
3. Measurement of internal taper angle
3. Measurement of Bore Diameter.
4. Calibration of a Dial gauge.
5. Measurement of Roundness.
6. Inspection of screw thread parameters using three wire method.
7. Measurement of gear tooth thickness
8. Measurements using Tool makers microscope.
9. Measurements using profile projector.
10. Straightness measurement using Autocollimator
11. Measurements using Vision Measuring System.
11. Study on CMM.
12. Study on surface roughness measuring machine
13. Determination of process capability from given components and plotting variable control
chart/attribute chart.
14. Analyzing the fault in given batch of specimens by using quality control tools.
15. Usage of MINITAB software with respect to quality control.
16. Case studies related to quality control.
TOTAL :60 PERIODS
OUTCOME:
 The students will be able to carry out various types of measurements using different
instruments and familiarization of software tools for quality control.

PR7601 COMPUTER AIDED PRODUCT DESIGN L T P C

3 0 0 3
OBJECTIVES:
 To introduce the concepts and applications of CAD.
 To introduce the various concepts and techniques used for product
design and to develop product design skills.

UNIT I INTRODUCTION TO COMPUTER AIDED DESIGN 9

Introduction to Engineering Design – Various phases of systematic design – sequential
engineering and concurrent engineering – Computer hardware and Peripherals – software
packages for design and drafting.

UNIT II COMPUTER GRAPHICS FUNDAMENTALS 9

Computer graphics – applications – principals of interactive computer graphics – 2D 3D
transformations – projections – curves – Bezier, B-Spline and NURBS – Concepts.

UNIT III GEOMETRIC MODELING 9

Geometric Modeling – types – Wire frame surface and solid modeling – Boundary Representation,
constructive solid geometry – Graphics standards – assembly modeling – use of software
packages

57
UNIT IV PRODUCT DESIGN CONCEPTS 9
Design for product life cycle - Product modeling – types of product models; product development
process tools – TRIZ – Altshuller’s inventive principles – Modeling of product metrics – Design for
reliability – design for manufacturability – machining, casting, and metal forming – design for
assembly and disassembly – Design for Ergonomics - Design for environment; Bench marking –
FMEA – QFD – DOE – Taguchi method of DOE – Quality loss functions .

UNIT V PRODUCT DATA MANAGEMENT 9

Product Data Management – concepts – Collaborative product design and commerce –
Information Acquisition – Sourcing factor – manufacturing planning factor – Customization factor –
Product life cycle management.
TOTAL:45 PERIODS
OUTCOME:
 Enable students to understand the features of modern design tools and data handling
product development.

TEXT BOOKS:
1. Kevin Otto, Kristin Wood, “Product Design”, Pearson Education, 7th Reprint , 2011.
2. Ibrahim Zeid, “CAD/CAM theory and Practice”, Tata McGraw Hill, 2nd edition, 2008

REFERENCES:
1. Biren Prasad, “Concurrent Engineering Fundamentals Vol.II”, Prentice Hall, 1st edition,
2007.
2. James G.Bralla, “Handbook of Product Design for Manufacturing”, McGraw Hill, 2nd edition,
2004
3. David F.Rogers.J, Alan Adams, “Mathematical Elements for Computer Graphics”, McGraw
Hill, 2nd edition, 2009.

PR7602 COMPUTER INTEGRATED MANUFACTURING SYSTEMS L T P C

3 0 0 3

OBJECTIVES:
 To understand the various automated manufacturing activities.
 To study the application of computer Technology in the manufacturing activities.
 To know the smooth transition from conventional manufacturing to automated production
and computer integrated manufacturing.

UNIT I INTRODUCTION TO AUTOMATED PRODUCTION SYSTEMS 9

Product design – General Design Process – Elements of CAD, CAM and CIM – Functions of CIM
– Benefits of CIM - Three step process for implementation of CIM – Types of Automation -
Automation strategies – USA Principle – Ten strategies for automation – Automation Migration
Strategy - Automated Production Lines – System Configurations – Work part Transfer
Mechanisms – Storage Buffers.

UNIT II MATERIAL HANDLING AND STORAGE SYSTEM 9

Factors influencing material handling system – Ten principles of Material handling – Types of
Material Transport Equipments; Industrial Trucks – conveyors - cranes and Hoists – Automated
guided vehicle system – Mono-rails and other rail-guided vehicles – Types - Automated Storage
and Retrieval systems – carousel storage systems.

58
UNIT III CELLULAR MANUFACTURING 9
Group Technology - Part families – Parts classification and coding – Production flow analysis –
Types of Process Planning - Cellular Manufacturing – Composite part concept – Machine cell
design – Key machine concept - quantitative analysis in cellular manufacturing using Holier
Method.

UNIT IV FLEXIBLE MANUFACTURING SYSTEM 9

Flexible Manufacturing System - Types – FMS components – Workstations, Material Handling and
storage system – types of FMS Layouts - computer control system- Human resource – Dead lock
in FMS – FMS application and benefits – FMS planning and implementation issues.

UNIT V AUTOMATED ASSEMBLY AND SHOP FLOOR CONTROL 9

Automated assembly – Fundamentals – system configurations - Parts delivery at work stations -
Applications - Shop floor control – Three phases – Factory data collection system – manual data
input techniques – Automated and semi automated data collection (ADC) systems – Bar code
technologies and other ADC Technologies.
TOTAL: 45 PERIODS
OUTCOME:
 The students will gain and apply the knowledge using computers for various manufacturing
activities

TEXT BOOKS:
1. Mikell P.Groover, “Automation, Production Systems and Computer-integrated
Manufacturing”, Prentice Hall of India Private Limited,4th edition 2014.
2. Kant Vajpayee.S, “Principles of Computer-Integrated Manufacturing” , Prentice Hall of India
Private Limited,1st edition, 2006.

REFERENCES:
1. Radhakrishnan.P, Subramanyan.S and Raju.V, “CAD/CAM/CIM”, New Age International
Publishers, 2nd edition 2008.
2. James A.Retrg and Henry W. Kraebher, “Computer Integrated Manufacturing”, Pearson
Education, Asia, 2001.
3. Viswanathan.N and Narahari.Y, “Performance modelling of automated manufacturing
system”, Prentice Hall of India Private Limited, 1st edtion ,2008.

PR7603 FINITE ELEMENT ANALYSIS IN MANUFACTURING L T P C

3 0 0 3
OBJECTIVE:
 To introduce the concept of FEA and to apply in the field of Manufacturing.

UNIT I INTRODUCTION 9
General field problems in engineering-Discrete and continuous models-Characteristics-the
relevance and place of finite element method- variational calculus- variational formulation of
boundary value problems-The method of weighted residuals-Rayleigh-Ritz and Galerkin methods-
Solution of large system of equations- Choleski Decomposition-Gaussian elimination procedures.

UNIT II GENERAL PROCEDURE OF FEA 9

Discretization of Domain selection of interpolation polynomials-Convergence requirements-
Formulation of element characteristics matrices and load vectors – Assembly of element
characteristics matrices-Solution of finite element equations-Post processing of results.

59
UNIT III FINITE ELEMENT ANALYSIS OF ONE DIMENSIONAL AND TWO
DIMENSIONAL PROBLEMS 9
One dimensional finite element analysis-Linear bar element-Quadratic bar element-Beam element-
Frame elements-One dimensional heat transfer-Two dimensional finite element analysis
approximation of geometry and field variables-Three nodded triangular element-Four nodded
rectangular element-Six nodded triangular element-Natural coordinates and coordinate
transformation – Numerical integration-Incorporation of boundary conditions

UNIT IV VIBRATIONAL ANALYSIS 9

Dynamic analysis-Equations of motion using Lagrange’s approach-Consistent and Lumped mass
matrices-Formulation of FE equations for vibration problems- Solution of Eigen value problems-
Transient vibration analysis-Thermal transients- Isoparametric elements.

UNIT V APPLICATION OF FINITE ELEMENT ANALYSIS 9

Finite element analysis of Machine elements - Axisymmetric FEA of a pressure vessel-Application
of FEM in various metal forming processes – Solid formulation and flow formulation – FEA
simulation of Metal cutting, Solidification of castings and Weldments.
TOTAL: 45 PERIODS
OUTCOME:
 Students shall develop in depth knowledge on techniques of FEA and tools for analysis of
typical manufacturing processes.

TEXT BOOKS:
1. Chandraputla T.R., and Belegundu A.D., “Introduction of Finite Element in Engineering”,
Prentice Hall of India, Fourth Edition, 2012.
2. Reddy. J.N., “An Introduction to Finite Element Method”, McGraw Hill, Third Edition, 2005.

REFERENCES:
1. Rao.S.S., “The Finite Element Method in Engineering”, Butterworth-Heinemann, fourth
edition, 2004.
2. Segarland. L.J., “Applied Finite Element Analysis”, John Wiley and Sons, second edition,
1984.
3. Seshu.P., “Text Book of Finite Element Analysis”, Prentice Hall of India, tenth print, 2010.
4. Dhanraj, R. and Prabhakaran Nair, K, Finite Element Method, 1/e, Oxford University
Press India, 2015

PR7651 PRODUCTION OF AUTOMOTIVE COMPONENTS L T P C

3 0 0 3
OBJECTIVES:
 To impart knowledge in various manufacturing methods in developing automotive
components.
 To study the principle of automobile engineering.

UNIT I ENGINE 9
Working principle of two strokes, four stroke and wankel engines – wet and dry liners – Piston and
Piston rings – types – classification. Production of Cylinder block, Cylinder head, liners, oil pan,
piston and piston rings and testing.

UNIT II ENGINE PARTS 9

Working principle of crank shaft – Cam shaft – valve operating mechanisms – carburetors - spark
plug Production of Connecting rod , Crankshaft , push rod and rocker arm ,valves, tappets ,
carburetors and spark plugs.

60
UNIT III FUEL AND TRANSMISSION SYSTEM 9
Working principle of – Fuel pumps – fuel injection pumps of diesel engines – multi point fuel
injection system – Gear Box – clutch system – differential mechanism – steering system – braking
system. Production of Friction lining materials for clutch and brakes, propeller shaft, gear box
housing, steering column, Energy absorbing steering column.

UNIT IV CHASSIS AND SUSPENSION SYSTEM 9

Working principle of – Suspension system – leaf spring and shock absorbers – wheel housing –
design concepts of chassis (aerodynamics and cross worthiness) - Production of Brake shoes, leaf
spring, wheel disc, wheel rim –usage of non metallic materials for chassis components.

UNIT V RECENT ADVANCES 9

Application of sensors and actuators – Emission control system – catalytic converter – Hydro
forming of exhaust manifold and lamp housing – stretch forming of Auto body panels – MMC liners
– thermal barrier coating of Engine head and valves – Selection of materials for Auto components.
TOTAL: 45 PERIODS
OUTCOME:
 The students shall have knowledge of production of various automotive components.

TEXT BOOKS:
1. Mohamed A.Omar, “The Automotive Body Manufacturing System and Processes”, John
Wiley Publications,USA, 2011.
2. Hiroshi yamagata, “The Science and Technology of materials in Automotive Engines”, CRC
Press Wordhead publishing Limited ,Cambridge, England, 2005.

REFERENCES:
1. Kirpal Singh, “Automobile Engineering.,Vol.Iand II”, Standard Publishers, New Delhi,13th
edition, 2012.
2. Garrett. T.K., Newton. K., Steeds. W., "The Motor Vehicle", Butterworth-Heinemann, 13th
edition, 2001
3. Serope Kalpakjian and Steven R. Schmid, “Manufacturing Processes for Engineering
Materials”, Fourth Edition – Pearson Education publications, 2003.
4. Brian Cantor, “Automotive Engineering”, CRC Press ,Taylor and Francis Group, London,
2008.

PR7611 CREATIVE AND INNOVATIVE PROJECT L T P C

0 0 4 2
The main objective of this course is to help the students to identify innovative projects
which promotes and enhances creativity to explore the variables. The goal is to improve the
creative and innovative aspects in the design, fabrication and implementation of real time
problems related to social/industrial and campus based.
This course will help the students to learn concepts, models, frameworks, tools, etc., in a
world where creativity and innovation is fast becoming a precondition for competitive advantages.
The students will be grouped into 3 or 4 (max) students as a batch and work under a
faculty member as project supervisor. The progress of project work will be continuously evaluated
by a committee constituted by the Head of the Department. The project report is to be submitted
by the group.
The final end semester exam will be conducted by an external member in a Viva Voce
mode.

Student has to take a project involving minimum of TWO areas as given below:
i. Design and fabrication of jigs/ fixtures/ press tool (involving total design, cost estimation
and prototype)
ii. Automation using fluid power and electrical (design and fabrication of a proto type model)

61
 iii. Design for manufacturability (To study an assembly based tolerance and fits, preparation of
machine and assembly drawing)
iv. Software development (To computerize the activity with proper algorithm as a application
software for problems faced in Production Engg. as office automation or e-governance)
v. Virtual Reality (To develop software based on any one production process explaining the
concept and working principles)
vi. Automation of manual related task (To design, fabricate and to complement the model for
the task selected).
TOTAL:60 PERIODS

PR7612 MODELLING AND ANALYSIS LABORATORY L T P C

0 0 4 2
OBJECTIVE:
• To train the students to make use of software for simulation and analysis for various
applications in the field of manufacturing engineering.
LIST OF EXPERIMENTS
1. One Dimensional FEA Problem.
a. Truss structure analysis.
b. Cantilever beam analysis.
c. Temperature distribution problem.
2. Two Dimensional FEA Problems.
a. Plane stress analysis.
b. Axisymmetric analysis.
c. Vibration Analysis.
3. Three Dimensional FEA Problems.
a. 3D Shell Analysis.
b. 3D Contact Analysis.
4. FEA Application in metal forming, Metal cutting, Casting process etc.
TOTAL:60 PERIODS
OUTCOMES:
 The student are trained in finite element modelling and analysis package.
 The students are enabled to do finite element modeling analysis for solid mechanics, heat
transfer problems, vibration problems, shell and contact problems in 2D and 3D simulation.

PR7701 INDUSTRIAL ENGINEERING AND MANAGEMENT L T P C

3 0 0 3
OBJECTIVE:
 To introduce various concepts of Engineering Management.

UNIT I PRINCIPLES OF MANAGEMENT AND PERSONNEL MANAGEMENT 9

General principles of management – Management functions – Organization – types – comparison
– functions of personnel management – recruitment – training – leadership/motivation –
communication – conflict – Industrial relations – trace union.

UNIT II INVENTORY MANAGEMENT 9

Purpose of Inventory – Cost related to inventory – Basic EOQ model – variations in EOQ model –
Finite Production, quantity discounts – ABC Analysis – MRP.

62
UNIT III OPERATIONS MANAGEMENT 9
Plant location – Layout – Materials Handling – Method study – Time study – Ergonomics –
Aggregate Planning – Value Analysis.

UNIT IV FINANCIAL MANAGEMENT 9

Capital – Types – sources – break even analysis – financial statements – income statement –
balance sheet – capital budgeting – working capital management – inventory pricing.

UNIT V MARKETING MANAGEMENT 9

Functions of marketing – Sales promotion methods – advertising – product packaging – marketing
variables – distribution channels – organization –market research – market research techniques.
TOTAL:45 PERIODS
TEXT BOOKS:
1. Kesavan. R, Elanchezhian. C and Sundar Selwyn. T , “Engineering Management” ,Eswar
Press, 2005.
2. Panneerselvam. R , “Production and Operations Management” , Prentice Hall of India,
2012.

REFERENCES:
1. Koontz and Odonnel , “Principles of Management”, McGraw Hill 2011.
2. Philips Kotler,,”Principles of marketing”, Pearson 2013.
3. Pandey. I.M., “Financial Management”, Vikas Publishing House, 2009
4. Ahuja. K.K., “Human Resource Management”, Kalyane Publication 2005
5. Martand. T, “Telesand , Industrial and Business Management, S.Chand & Co., 2001
6. Kesavan. R., Elanchezian. C. and Vijayaramnath. B., “Production Planning and Control”,
Anuratha Publishing Co., Ltd., Chennai - 2008.

PR7702 MECHATRONICS FOR AUTOMATION L T P C

3 0 0 3
OBJECTIVE
 To enhance the knowledge to develop the mechatronics system through the understanding
of sensors, signals, controls, actuators and microcontrollers.

UNIT I MECHATRONICS SYSTEMS AND SENSORS 9

Introduction to mechatronics systems, key elements, ways of integration – hardware and software.
sensors – characteristics – static and dynamic, types - linear, rotational, velocity acceleration,
force, torque, flow, temperature, proximity, optical, Micro and Nano sensors, selection of sensors.

UNIT II SIGNAL CONDITIONING AND CONTROL SYSTEM 9

Analog and Digital Signals - Signal condition module – Amplifiers - inverting amplifier, non-
inverting amplifier, instrumentation amplifier, Filters, A/D and D/A converter. Open loop and closed
loop control systems. P, PD, PI, PID controllers and its use for stable system design.

UNIT III ACTUATORS 9

Electrical actuators and its characteristics – DC Motor, servo motor and stepper motor. H-bridge
circuits and stepper motor driving circuits. Switching devices – mechanical, solenoids, relays.
Types and characteristics of Micro and Nano actuators.

UNIT IV MICROCONTROLLERS 9
8051 Microcontrollers – Architecture, Address modes, Instruction sets, programming exercises -
Memories – different types – Different I/O devices, Stepper and servo motor interface. Overview of
advanced microcontrollers and its typical applications.

63
UNIT V MECHATRONICS SYSTEM 9
Stages in Designing Mechatronics Systems – Traditional and Mechatronic Design –Case studies
mechatronics system in CNC machine, Engine management system, Car production and its
assembly line automation.
TOTAL: 45 PERIODS
OUTCOME:
 It gives the frame work of knowledge that allows the production engineers to automate the
production field.

TEXT BOOKS:
1. Bolton .W., “Mechatronics” ,Pearson Education Limited, 5th Edition, 2011.
2. Rajput .R.K., “A Text Book of Mechatronics”, Chand and Co, 5th Edition, 2013.

REFERENCES:
1. Devadas Shetty, Richard A. Kolk, “Mechatronics System Design”, CENGAGE Learning
Custom Publishing, 2nd International student edition, 2010.
2. Mazidi. M.A and Mazidi .M.J., MCkinlay.R.D, “The 8051 Microcontroller and Embedded
Systems Using Assembly and C”, Pearson India, 2nd Edition, 2008.
3. Patranabis D., “Sensor and Actuators”, Prentice Hall of India Pvt Ltd., 2nd edition 2005.
4. A. Nagoor Kani, “Control Systems”, RBA Publications Pvt Ltd., 2014.

PR 7703 ROBOTIC TECHNOLOGY L T P C

3 0 0 3
OBJECTIVE:
 To study the kinematics, drive systems and programming of robots.

UNIT I FUNDAMENTALS OF ROBOT 9

Robot – Definition – Robot Anatomy – Co-ordinate systems, Work Envelope, types and
classification – specifications – Pitch, yaw, Roll, Joint Notations, Speed of Motion, Pay Load –
Robot Parts and their functions – Need for Robots – Different Applications.

UNIT II ROBOT KINEMATICS 9

Forward kinematics, inverse kinematics and the difference: forward kinematics and inverse
Kinematics of Manipulators with two, three degrees of freedom (in 2 dimensional), four degrees of
freedom (in 3 dimensional) – derivations and problems. Homogeneous transformation matrices,
translation and rotation matrices Dennavit and Hartenberg transformation.

UNIT II I ROBOT DRIVE SYSTEMS AND END EFFECTORS 9

Pneumatic Drives – Hydraulic Drives – Mechanical Drives – Electrical Drives – D.C. Servo Motors,
Stepper Motor, A.C. Servo Motors – Salient Features, Applications and Comparison of All These
Drives. End Effectors – Grippers – Mechanical Grippers, Pneumatic and Hydraulic Grippers,
Magnetic grippers, vacuum grippers, two fingered and three fingered grippers, internal grippers
and external grippers, selection and design considerations of a gripper - gripper force calculation
and analysis.

UNIT IV SENSORS IN ROBOTICS 9

Force sensors, touch and tactile sensors, proximity sensors, non-contact sensors, safety
considerations in robotic cell, proximity sensors, fail safe hazard sensor systems, and compliance
mechanism. Machine vision system - camera, frame grabber, sensing and digitizing image data –
signal conversion, image storage, lighting techniques, image processing and analysis – data
reduction, segmentation, feature extraction, object recognition, other algorithms, applications –
Inspection, identification, visual serving and navigation.

64
UNIT V PROGRAMMING AND APPLICATIONS OF ROBOT 9
Teach pendant programming, lead through programming, robot programming languages – VAL
programming – Motion Commands, Sensors commands, End-Effector Commands, and simple
programs - Role of robots in inspection, assembly, material handling, underwater, space and
medical fields.
TOTAL: 45 PERIODS
OUTCOME:
 The students will be able of interpret the features of robots and technology involved in the
control.
TEXT BOOKS:
1. Mikell.P.Groover , “Industrial Robotics – Technology, Programming and applications”,
McGraw Hill 2th edition 2012.
2. Ganesh.S.Hedge ,”A textbook of Industrial Robotics”, Lakshmi Publications, 2006.

REFERENCES:
1. Fu K.S. Gonalz R.C. and ice C.S.G.”Robotics Control, Sensing, Vision and
Intelligence”, McGraw Hill book co. 2007.
2. YoramKoren, “Robotics for Engineers”, McGraw Hill Book, Co., 2002.
3. Janakiraman P.A., “Robotics and Image Processing”, Tata McGraw Hill 2005.

PR7711 MECHATRONICS AND ROBOTICS LABORATORY L T P C

0 0 4 2
OBJECTIVES:
 To understand the various concepts of sensors, transducers, and actuators.
 To impart practical knowledge in mechatronics, Robotic system, Simulation softwares and
microcontroller programming.

LIST OF EXPERIMENTS:
1. Study of characteristics of optical sensors.
2. Study of characteristics of temperature transducers.
3. Experiments on LVDT and ultrasonic transducer.
4. 8 bit and 16 bit Arithmetic operation in 8051 microcontroller.
5. I/O port programming of 8051 microcontroller.
6. PC parallel port and microcontroller interfacing of a unipolar stepper motor.
7. Modeling and Simulation of mechanisms using simulation software.
8. Kinematic analysis and verification of 2 DOF RR Configuration robot.
9. Analysis and synthesis of two degree of freedom planar robot.
10. Robot control with stepper motor interfacing.
11. Experimental verification of Freudenstein equation for 1 DOF robot.
12. Characterization of DC brush servo motor.
13. Study of Servo Motor Control in a linear slide base.
14. Study of AC and DC power control.
TOTAL: 60 PERIODS
OUTCOME:
• Students will get practical experience with sensors, actuators, microcontroller
programming, modelling and simulation software to get familiar with mechatronics systems
and robotics.

65
PR7712 INDUSTRIAL TRAINING / INTERNSHIP L T P C
0 0 4 2
The main objective of the industrial training / internship is to experience and understand the
real life situations in any industrial organization and their related environmental aspects. The
students are advocated to take a small project during the training / internship.

The students have to undergo practical training for FOUR weeks (during 5th or 6th semester
holidays) in recognized industrial establishments. The student has to submit a report about the
training / internship with the following information.
1. Industry profile.
2. Organization structure.
3. Plant layout.
4. Process/ Machines/ Equipment/ Devices details.
5. Labor welfare schemes.
6. Training schedule.
7. Project work carried out.
8. Learning points.
The assessment will be based equally on the report in the prescribed format and Viva Voce
examination by a committee nominated by the Head of the Department.
TOTAL:60 PERIODS

PR7811 PROJECT WORK L T P C

0 0 20 10
A project area must be selected by the students in consultation with the faculty members who act
as a guide. The objective of the project work is to deepen comprehension of principles by applying
them to a problem which may be; design and fabrication of a device / a research project with a
focus on the application needed by the industry; a software oriented project involving design and
analysis; a management project to apply the latest technique for an industrial problem; material
characterization (or) any inter- disciplinary topic of due weightage / continued work of internship in
a company etc.,
The progress of this project is evaluated based on a minimum of two reviews. The review
committee will be constituted by the Head of the Department. A project report is to be submitted at
the end of the project. The final end semester exam will be evaluated jointly by external and
internal examiners based on oral presentation and the demonstration of the project work.
TOTAL: 300 PERIODS

CY7001 CHEMISTRY FOR SMART MATERIALS MANUFACTURING L T P C

3 0 0 3
OBJECTIVES:
 Basic concepts, types and industrial application of shape memory alloys
 To emphasize the importance of cutting fluids and its effect in the manufacturing process
 To understand the efficiency of electrochemical energy systems for industrial application
 To familiarize the stages, measurement and control of wear
 To know about battery technology and disseminate the student about clean and green
alternate energy sources

UNIT I SHAPE MEMORY ALLOYS 9

Shape Memory Alloys – Introduction, one way memory effect, two way memory effect – Types
(copper-aluminium-nickel, and nickel-titanium (Ni-Ti) alloys), manufacturing methods, properties,
crystal structures, applications and limitations.
66
UNIT II CUTTING FLUIDS 9
Cutting Fluids – definition, types - oil, water, emulsion fluid as coolant and lubricant, selection
parameters for cutting fluids, functions of cutting fluid- shear – strength reduction mechanism,
applications, preparation of demineralized water (ion exchange method and permanganate
method).

UNIT III ELECTROCHEMICAL ENERGY SYSTEMS 9

Electrochemical cell, definition, types – difference between a galvanic cell and an electrolytic cell –
a Daniel cell – electrochemical cell notations – the origin of the electrode potential – measurement
of electrode potential – derivation of Nernst equation – applications (EMF measurement) –
Electrodes – types – ion selective electrodes – principle and applications – reference electrode –
primary and secondary electrodes – Determination of pH of a solution using glass and calomel
electrodes – concentration cells.

UNIT IV WEAR MECHANISM 9

Wear – definition, stages of wear (primary, secondary, tertiary), types – adhesive, abrasive,
surface fatigue, fretting, erosion wear, measurement – Tribometry (Pin/ball on disc method),
control of wear – Lubrication – theory, mechanism, types of lubricants (liquid, semi-solid, solid and
gaseous), selection of lubricants.

UNIT V BATTERY TECHNOLOGY AND ENERGY SOURCES 9

Battery technology: Principle, characteristics – classification – applications – Dry cells, Lead - acid,
alkaline, Nickel – cadmium and Lithium batteries, discharging and recharging mechanism. Fuel
cells – merits – types – H2 – O2 Fuel cells, alkaline fuel cells, PEMFC, MCFC, SOFC. Alternate
energy sources – nuclear energy, hydro energy, wind energy, bio energy and solar cells, UPS.
TOTAL: 45 PERIODS
OUTCOME:
 The students are familiarized with the use chemicals in the field manufacturing

TEXT BOOKS:
1. Kannan P, Ravikrishnan A, “Engineering Chemistry”, Sri Krishna Hitech Publishing
Company Pvt. Ltd. Chennai, Revised Edition, 2014.
2. Jain P.C. and Monika Jain., “Engineering Chemistry”, Dhanpat Rai Publishing Company
Pvt Ltd, New Delhi, Revised Paper Back edition, 2014.

REFERENCES
1. Sivasankar, B., “Engineering Chemistry”, Tata McGraw-Hill Publications Co Ltd, New Delhi,
1st edition, 2008.
2. Sharma, B. K., “Engineering Chemistry”, Krishna Prakasan Media Pvt Ltd., Meerut, 7th
edition, 2005.
Alexander Thaler, Daniel Watzenig, “Automotive Battery Technology” , Springer
International Publishing 2014.
3. Dara S.S, Umare S.S., “Engineering Chemistry”, S. Chand and Company Ltd., New Delhi,1st
edition, 2014

CY7002 SURFACE MODIFICATIONS AND ANALYTICAL TECHNIQUES L T P C

3 0 0 3
OBJECTIVE
• To acquire knowledge in the fields of corrosion and its control, abrasives and refractories,
metallic coatings, chemical conversion and organic coatings and surface characterization.

67
UNIT I CORROSION AND ITS CONTROL 9
Introduction- chemical and electrochemical corrosions- mechanism of electrochemical and
galvanic corrosions- concentration cell corrosion- passivity- soil, pitting, inter-granular, water line,
stress and microbiological corrosions- galvanic series- factors influencing corrosion -
measurement of corrosion rate. Corrosion control – material selection and design -
electrochemical protection – sacrificial anodic protection and impressed current cathodic
protection.

UNIT II ABRASIVES AND REFRACTORIES 9

Abrasives: definition, classification or types, grinding wheel, abrasive paper and cloth. Refractories:
definition, characteristics, classification, properties – refractoriness and RUL, dimensional stability,
thermal spalling, thermal expansion, porosity; Manufacture of refractories – general method; acidic
refractories – fire clay, silica; basic refractories – magnesite, dolomite; neutral refractories – silicon
carbide, zircon.

UNIT III METALLIC COATINGS 9

Definition – methods of metallic coating, hot dipping - galvanizing, tinning, metal cladding,
electroplating, electroless plating. Various other metallic coatings – displacement plating- Kanigen
process – metal spraying or metallised coating – cementation or diffusion coatings.

UNIT IV CHEMICAL CONVERSION AND ORGANIC COATINGS 9

Chemical Conversion coatings- Types- phosphate, chromate, chemical oxide and anodized
(Aluminium) coatings -Organic coatings- paint, vehicle or drying oil, thinners, driers- Formulation of
paints, failure of paint film- Varnishes, Enamels, Lacquers, Epicoating, Emulsion Paints-types,
advantages and disadvantages – Special paint.

UNIT V SURFACE CHARACTERIZATION 9

Surface–Interface–Bulk–Definition,– Principle- instrumentation- block diagram-data analysis and
applications of Scanning Electron Microscopy (SEM) and Transmission electron microscopy (TEM)
– Atomic Force Microscopy (AFM), Surface Analysis by Brunauer–Emmett–Teller (BET) Method –
X-Ray Photoelectron Spectroscopy, Surface coating thickness measurements (thin and thick –
Profilometry).
TOTAL: 45 PERIODS
OUTCOME
• To have thorough understanding in the fields of shape memory alloys corrosion and its
control, abrasives and refractories, metallic coatings, chemical conversion and organic
coatings and surface characterization.

TEXT BOOKS
1. Kannan P., Ravikrishnan A., “Engineering Chemistry”, Sri Krishna Hitech Publishing
Company Pvt. Ltd. Chennai, 2014
2. Jain P.C. & Monica Jain., “Engineering Chemistry”, Dhanpat Rai Publishing Company (P)
Ltd, New Delhi, 2014.

REFERENCE
1. Dara S.S, Umare S.S. “Engineering Chemistry”, S. Chand & Company Ltd., New Delhi,
2014

68
GE7071 DISASTER MANAGEMENT L T P C
3 0 0 3
OBJECTIVES:
 To provide students an exposure to disasters, their significance and types.
 To ensure that students begin to understand the relationship between vulnerability,
disasters, disaster prevention and risk reduction
 To gain a preliminary understanding of approaches of Disaster Risk Reduction (DRR)
 To enhance awareness of institutional processes in the country and
 To develop rudimentary ability to respond to their surroundings with potential
disaster response in areas where they live, with due sensitivity

UNIT I INTRODUCTION TO DISASTERS 9

Definition: Disaster, Hazard, Vulnerability, Resilience, Risks – Disasters: Types of disasters –
Earthquake, Landslide, Flood, Drought, Fire etc - Classification, Causes, Impacts including social,
economic, political, environmental, health, psychosocial, etc.- Differential impacts- in terms of
caste, class, gender, age, location, disability - Global trends in disasters: urban disasters,
pandemics, complex emergencies, Climate change- Dos and Don’ts during various types of
Disasters.

UNIT II APPROACHES TO DISASTER RISK REDUCTION (DRR) 9

Disaster cycle - Phases, Culture of safety, prevention, mitigation and preparedness community
based DRR, Structural- nonstructural measures, Roles and responsibilities of- community,
Panchayati Raj Institutions/Urban Local Bodies (PRIs/ULBs), States, Centre, and other stake-
holders- Institutional Processess and Framework at State and Central Level- State Disaster
Management Authority(SDMA) – Early Warning System – Advisories from Appropriate Agencies
.
UNIT III INTER-RELATIONSHIP BETWEEN DISASTERS AND DEVELOPMENT 9
Factors affecting Vulnerabilities, differential impacts, impact of Development projects such as
dams, embankments, changes in Land-use etc.- Climate Change Adaptation- IPCC Scenario and
Scenarios in the context of India - Relevance of indigenous knowledge, appropriate technology
and local resources

UNIT IV DISASTER RISK MANAGEMENT IN INDIA 9

Hazard and Vulnerability profile of India, Components of Disaster Relief: Water, Food, Sanitation,
Shelter, Health, Waste Management, Institutional arrangements (Mitigation, Response and
Preparedness, Disaster Management Act and Policy - Other related policies, plans, programmes
and legislation – Role of GIS and Information Technology Components in Preparedness, Risk
Assessment, Response and Recovery Phases of Disaster – Disaster Damage Assessment.

UNIT V DISASTER MANAGEMENT: APPLICATIONS AND CASE STUDIES AND

FIELD WORKS 9
Landslide Hazard Zonation: Case Studies, Earthquake Vulnerability Assessment of Buildings and
Infrastructure: Case Studies, Drought Assessment: Case Studies, Coastal Flooding: Storm Surge
Assessment, Floods: Fluvial and Pluvial Flooding: Case Studies; Forest Fire: Case Studies, Man
Made disasters: Case Studies, Space Based Inputs for Disaster Mitigation and Management and
field works related to disaster management.
TOTAL: 45 PERIODS
OUTCOMES:
The students will be able to
 Differentiate the types of disasters, causes and their impact on environment and society
 Assess vulnerability and various methods of risk reduction measures as well as
 mitigation.
 Draw the hazard and vulnerability profile of India, Scenarious in the Indian context,
 Disaster damage assessment and management.

TEXTBOOKS:
69
 1. Singhal J.P. “Disaster Management”, Laxmi Publications, 2010. ISBN-10: 9380386427
ISBN-13:978-9380386423
2. Tushar Bhattacharya, “Disaster Science and Management”, McGraw Hill India Education
Pvt.
3. Ltd., 2012. ISBN-10: 1259007367, ISBN-13: 978-1259007361]
4. Gupta Anil K, Sreeja S. Nair. Environmental Knowledge for Disaster Risk Management,
NIDM, New Delhi, 2011
5. Kapur Anu Vulnerable India: A Geographical Study of Disasters, IIAS and Sage Publishers,
New Delhi, 2010.

REFERENCES
1. Govt. of India: Disaster Management Act , Government of India, New Delhi, 2005
2. Government of India, National Disaster Management Policy,2009.

GE7074 HUMAN RIGHTS L T P C

3 0 0 3
OBJECTIVE:
 To sensitize the Engineering students to various aspects of Human Rights.

UNIT I 9
Human Rights – Meaning, origin and Development. Notion and classification of Rights – Natural,
Moral and Legal Rights. Civil and Political Rights, Economic, Social and Cultural Rights; collective
/ Solidarity Rights.

UNIT II 9
Evolution of the concept of Human Rights Magana carta – Geneva convention of 1864. Universal
Declaration of Human Rights, 1948. Theories of Human Rights.

UNIT III 9
Theories and perspectives of UN Laws – UN Agencies to monitor and compliance.

UNIT IV 9
Human Rights in India – Constitutional Provisions / Guarantees.

UNIT V 9
Human Rights of Disadvantaged People – Women, Children, Displaced persons and Disabled
persons, including Aged and HIV Infected People. Implementation of Human Rights – National and
State Human Rights Commission – Judiciary – Role of NGO’s, Media, Educational Institutions,
Social Movements.
TOTAL : 45 PERIODS
OUTCOME :
 Engineering students will acquire the basic knowledge of human rights.
REFERENCES:
1. Kapoor S.K., “Human Rights under International law and Indian Laws”, Central Law
Agency, Allahabad, 2014.
2. Chandra U., “Human Rights”, Allahabad Law Agency, Allahabad, 2014.
3. Upendra Baxi, The Future of Human Rights, Oxford University Press, New Delhi.

70
GE7351 ENGINEERING ETHICS AND HUMAN VALUES L T PC
3 0 0 3
OBJECTIVES
• To emphasise into awareness on Engineering Ethics and Human Values.
• To understand social responsibility of an engineer.
• To appreciate ethical dilemma while discharging duties in professional life.

UNIT I HUMAN VALUES 3

Morals, Values and Ethics – Integrity – Work Ethic – Honesty – Courage –Empathy – Self-
Confidence – Discrimination- Character.

UNIT II ENGINEERING ETHICS 9

Senses of 'Engineering Ethics' - variety of moral issues - types of inquiry - moral dilemmas - moral
autonomy - Kohlberg's theory - Gilligan's theory - consensus and controversy – Models of
Professional Roles - theories about right action - Self-interest –Professional Ideals and Virtues -
uses of ethical theories. Valuing Time – Co-operation – Commitment –

UNIT III ENGINEERING AS SOCIAL EXPERIMENTATION 9

Engineering as experimentation - engineers as responsible experimenters - codes of ethics –
Importance of Industrial Standards - a balanced outlook on law – anticorruption- occupational
crime -the challenger case study.

UNIT IV ENGINEER’S RIGHTS AND RESPONSIBILITIES ON SAFETY 12

Collegiality and loyalty – Respect for authority – Collective Bargaining – Confidentiality- Conflict of
interest – Occupational Crime – Professional Rights – IPR- Safety and risk - assessment of safety
and risk - risk benefit analysis and reducing risk - the Three Mile Island, Bhopal Gas plant and
Chernobyl as case studies.

UNIT V GLOBAL ISSUES 12

Multinational corporations - Environmental ethics - computer ethics - weapons development -
engineers as managers-consulting engineers-engineers as expert witnesses and advisors -moral
leadership-Sample code of conduct.
TOTAL : 45 PERIODS
OUTCOMES
 Students will have the ability to perform with professionalism , understand their rights ,
legal ,ethical issues and their responsibilities as it pertains to engineering profession with
engaging in life-long learning with knowledge of contemporary issues.

TEXTBOOKS
1. Mike Martin and Roland Schinzinger, “Ethics in Engineering”, McGraw-Hill, New York
2005.
2. Charles E Harris, Michael S. Protchard and Michael J Rabins, “Engineering Ethics –Concepts
and Cases”, Wadsworth Thompson Leatning, United States, 2000 (Indian
3. Govindarajan M, Natarajan S, Senthil Kumar V. S, “Engineering Ethics”, Prentice Hall of India,
New Delhi, 2004.

REFERENCES
1. Charles D. Fleddermann, “Engineering Ethics”, Pearson Education / Prentice Hall, New
Jersey, 2004
2. Charles E Harris, Michael S. Protchard and Michael J Rabins, “Engineering Ethics – Concepts
and Cases”, Wadsworth Thompson Leatning, United States, 2000
3. John R Boatright, “Ethics and the Conduct of Business”, Pearson Education, New Delhi, 2003.
4. Edmund G Seebauer and Robert L Barry, “Fundamentals of Ethics for Scientists and
Engineers”, Oxford Press , 2000
5. R.Subramanian , “Professional Ethics “,Oxford University Press ,Reprint ,2015.

71
MF7072 ELECTRONIC MATERIALS AND PROCESSING L T P C
3 0 0 3
OBJECTIVES
 To describe the basic processes of materials that are used to fabricate semiconductor and
MEMS devices.
 To learn the thermal considerations of electronic materials.

UNIT I INTRODUCTION 9
Overview of semiconductors and other basic materials - Plastics, Elastomers, and Composites -
tables with material properties, terms and definitions, trade names, and material structure
correlation, basic electronic components and its metallurgical structure. Carrier generation and
recombination; junctions; photovoltaic materials and devices.

UNIT II ORGANIC MATERIALS AND PROCESSES 9

Types and properties of organic materials, manufacturing technique –Vacuum Metallization,
Vapour phase deposition, Thermal Imaging, Digital Lithography, Application areas.

UNIT III MEMS MATERIALS AND PROCESS 9

MEMS design process- Methods, Selection of materials for process, Optimization techniques in
design, Over view of additive process of Semiconductors, Dielectric materials, Metals, and
Polymer Materials, Piezoelectric materials, Shape memory alloys , Micromachining techniques,
packaging methods.

UNIT IV MATERIALS SYSTEMS 9

Solder technologies for electronic packaging and assembly, Electroplating and Deposited metallic
coatings, Printed circuit board fabrication, Materials and Processes for Hybrid Microelectronics and
Multichip modules. Adhesives under fills, and Coatings in electronics assemblies.

UNIT V THERMAL MANAGEMENT OF MATERIALS AND SYSTEMS 9

Temperature effects on circuit operation and physical construction. Laws of heat transfer
mechanism and their considerations in the manufacturing process. Thermal management in
packaging of electronic materials
TOTAL: 45 PERIODS
OUTCOME:
 Students will be familiar about the electronics material characteristics, and preparation and
production process.

TEXT BOOKS:
1. Charles A. Harper , “Electronic Materials and Processes Hand book”, McGraw-Hill, 2010.
2. Reza Ghodssi, Pinyen Lin, “MEMS Materials and Process Handbook”, Springer, 2011.

REFERENCES:
1. Hagen Klauk, Organic Electronics, “Materials, Manufacturing and Applications”, Wiley -
VCH VerlagGmbh and Co, 2006.
2. Merrill L. Minges, “Electronic Materials Handbook”, ASM international, 1989.
3. Franky So, “Organic Electronics: Materials, Processing, Devices and Applications”, CRC
Press, 2009.

72
 PR7001 ADVANCES IN OPERATIONS RESEARCH L T P C
3 0 0 3
OBJECTIVE:
• To introduce the advanced OR models and to apply them for Engineering problems.

UNIT I INTRODUCTION 9
Optimization – Historical Development – Engineering applications of optimization – Statement of
an Optimization problem – classification of optimization problems.

UNIT II CLASSIC OPTIMIZATION TECHNIQUES 9

Linear programming– simplex method – dual simplex method – revised simplex method – duality
in LP – Sensitivity Analysis - Parametric Linear programming.

UNIT III NON-LINEAR PROGRAMMING 9

Introduction – Lagrangian Method – Kuhn-Tucker conditions – Quadratic programming –
Separable programming – Stochastic programming

UNIT IV INTEGER PROGRAMMING 9

Cutting plane algorithm – Branch and bound technique - Zero-one implicit enumeration; Goal
programming – geometric programming; Network Techniques – Shortest Path Model – Minimum
Spanning Tree Problem – Maximal flow problem.

UNIT V DYNAMIC PROGRAMMING 9

Formulation – Application to capital budgeting, reliability improvement, shortest path, solution of
LP using DP.
TOTAL: 45 PERIODS
OUTCOME:
 The students are equipped with basic and advanced techniques of operations research.

TEXT BOOKS:
1. Panneerselvam. R., “Operations Research”, Prentice Hall of India Private Limited, New
Delhi ,2005.
2. Sharma.S.D., “Operations Research: Theory, Methods and Applications”, KedarNath Ram
Nath publisher, 15th edition, 1972.

REFERENCES:
1. Gupta. P.K. and Man-Mohan, “Problems in Operations Research”, Sultan chand and
Sons, 1994.
2. Ravindran, Philips and Solberg, “Operations Research Principles and Practice”, John Wiley
and Sons, Singapore, 1992.
3. Sharma.J.K., “Operations Research Theory and Applications” – Macmillan India Ltd.,1997.
4. Hamdy A. Taha, “Operations Research – An Introduction”, Prentice Hall of India, 1997.

PR7002 APPLIED HEAT TRANSFER L T P C

3 0 0 3
OBJECTIVES:
 To introduce the basic concepts and the science behind heat transfer.
 A provide a brief description about heat exchangers and their functioning

UNIT I MODES OF HEAT TRANSFER 9

Modes of heat transfer - effect of temperature on thermal conductivity of different solids, liquids and
gases- derivation of generalized equation in Cartesian ,cylindrical and spherical coordinates and its
reduction to specific cases- General laws

73
UNIT II CONDUCTION 9
Fourier’s law- One dimensional steady state conduction- heat conduction through plane and
composite walls, cylinders and spheres-electrical analogy-critical radius of insulation for cylinder
and sphere, overall heat transfer coefficient- Transient heat conduction- lumped heat capacity
analysis, time constant, transient heat conduction in solids with finite conduction and convective
resistances -Heat transfer from extended surface-Types of fin, heat flow through rectangular fin,
infinitely long fin, fin insulated at the tip and fin losing heat at the tip-efficiency and effectiveness of
fin-Biot number-Estimation of error in temperature measurement in a thermometer well.

UNIT III CONVECTION 9

Newton’s law of cooling-Dimensional analysis applied to forced and free convection- dimensionless
numbers and their physical significance-empirical correlations for free and forced convection -
Continuity, momentum and energy equations-thermal and hydrodynamic boundary layer-Blasius
solution for laminar boundary layer- General solution of Von-Karman integral momentum equation

UNIT IV RADIATION 9
Absorptivity, reflectivity and transmissivity- black, white and grey body-emissive power and
emissivity-laws of radiation – Planck, Stefan-Boltzmann, Wein’s displacement, Kirchhoff’s law,
intensity of radiation and solid angle- Lambert’s cosine law
Radiation heat exchange between black bodies, shape factor, heat exchange between non-black
bodies- infinite parallel planes and infinite long concentric cylinders- radiation shield- heat exchange
between two grey surfaces- electrical analogy

UNIT V HEAT EXCHANGER 9

Classification- heat exchanger analysis- LMTD for parallel and counter flow exchanger- condenser
and evaporator- overall heat transfer coefficient- fouling factor- correction factors for multi pass
arrangement- effectiveness and number of transfer unit for parallel and counter flow heat
exchanger- introduction of heat pipe and compact heat exchanger
TOTAL:45 PERIODS
OUTCOMES:
 Understand basic concept of heat transfer
 Able to do basic calculations involving heat transfer as is typical for a mechanical engineer.
This includes conduction, convection and radiation heat transfer as well as heat exchanger
design.
 Apply scientific and engineering principles to analyze and design aspects of engineering
systems that relate to conduction, convection and radiation heat transfer.

TEXT BOOKS:
1. Nag. P.K., “Heat and Mass Transfer” ,McGraw Hill, 3rd edition, 2011.
2. Yunus Cengel, “Heat and Mass Transfer: Fundamentals and Application”, McGraw Hill, 5 th
edition, 2014.

REFERENCES:
1. Incropera and Dewitt, “Fundamental of Heat and Mass Transfer”, Wiley Publication, 7 th
edition.
2. Mills and Ganesan, “Heat Transfer”, Pearson Education , 2nd edition, 2009.
3. Holman. J P , “Heat Transfer”, McGraw Hill , 10th edition, 2011.
4. Rajput. R. K, “Heat and Mass Transfer”, S.Chand Publication, 2007.
5. Dutta, Binay K, “Heat Transfer: Principles and Applications” , PHI Publication , 1st edition,
2006.

74
PR7003 APPLIED PROBABILITY AND STATISTICS L T P C
3 0 0 3
OBJECTIVE
 To train the students so that students will be able to design experimental designs and use
these concepts for research design.

UNIT I PROBABILITY THEORY 9

Random variables – probability density and distribution functions-moment generating and
characteristic functions – Binomial, Poisson, Normal distributions and their applications.

UNIT II SAMPLING THEORY 9

Sampling distributions – Standard error – t, F, Chi square distributions – applications.

UNIT III ESTIMATION THEORY 9

Interval estimation for population mean, standard deviation, difference in means, difference in
proportions, ratio of standard deviations – point estimation.

UNIT IV TESTING OF HYPOTHESIS 9

Hypothesis testing – Small samples – Tests concerning proportion, means, standard deviations –
Tests based on chi square.

UNIT V ANOVA 9
One, two factor models – Design of experiments, MANOVA.
TOTAL: 45 PERIODS
OUTCOME:
 The students are taught the basic concepts of probability and statistics and their application
in industrial problems.

TEXT BOOKS:
1. Richard I.Levin and David S. Rubin, “Statistics for Management”, Pearson India, 2013.
2. John E.Freunds, “Mathematical statistics”, Pearson Education, 8th edition, 2012

REFERENCES:
1. Hooda.R.P., “Statistics for business and economics”, Vikas 2013
2. Gupta.S.C. and Kapoor.V.K, “Fundamentals of Mathematical Statistics”, Sultanchand,
2014.

PR7004 CONCEPTS OF GREEN MANUFACTURING L T P C

3 0 0 3
OBJECTIVES
 To analyze manufacturing processes with intent to point out areas of adverse
environmental impact and how this impact could be minimized or prevented.
 To incorporating the environmentally based improvements such as recycling, substitution
of environmentally favorable materials and redesign of processes.
 To design the rules and processes to meet the current market need and the green
manufacturing requirements by selecting and evaluating suitable technical and supply
chain management schemes.

UNIT I ENVIRONMENTAL SUSTAINABILITY AND IMPACT ASSESSMENT 9

Environmental impact assessment objectives – Legislative development – European community
directive – Hungarian directive. Strategic environmental assessment and sustainability appraisal.
Regional spatial planning and environmental policy.
75
UNIT II LEAN MANUFACTURING AND GREEN ENERGY SYSTEM 9
Conventional Manufacturing versus Lean Manufacturing – Principles of Lean Manufacturing. World
energy consumption – Green house effect, Global warming. Energy conservation and
measurement principles with their applicability in engineering and process industries.

UNIT III ENERGY SAVING MACHINERY AND COMPONENTS 9

Electricity Billing: Components and Costs – kVA – Need and Control – Determination of kVA
demand and Consumption. Selection of fans, pumps and Compressors – Performance Evaluation
– Cause for inefficient operation – scope for energy conservation.

UNIT IV HAZARDOUS AND SOLID WASTE MANAGEMENT 9

Hazardous waste : definition, terminology, classification and Sources – Need for hazardous waste
management: Need, Handling, methods of collection, storage and transport with suitable
examples. Solid waste management : Need, Waste prevention and Life cycle assessment.
Collection, storage, reuse and recycling of solid waste with suitable examples.

UNIT V SUSTAINABILITY PRACTICE 9

The origins of sustainable development – Nature preservation and emergence of sustainable
development. Environmental degradation, over population and intensification. Risk society – Risk
and environment – Environmental pollution – Manufacturing pollution.
TOTAL: 45 PERIODS
OUTCOMES
 The students will be able to analyze manufacturing processes towards minimization or
prevention of environmental impacts.
 The students will be in a position to apply suitable schemes towards design of green
manufacturing requirements.
 As a whole, students will be in a position adopt recycle, reduce and reuse techniques.

TEXT BOOKS:
1. Ronald G. Askin and Jeffrey B. Goldberg, “Design and Analysis of Lean Production
Systems”, John Wiley and Sons, 2003.
2. Stephen Doven, “Environment and Sustainability Policy : Creation, implementation,
Evaluation”, The Federation Press, 2005.

REFERENCES:
1. Clive George, Collin.C, Kirkpolarice.H, “Impact Assessment and sustainable development”,
Edward Elgar Publishing 2007.
2. “Green Manufacturing: Case Studies in Lean and Sustainability, Association for
Manufacturing Excellence”, CRC press, 2007.
3. Chaigier N.A. “Energy Consumption and Environment”, McGraw Hill, 2007.
4. Hamies, “Energy Auditing and Conservation, Methods Measurements, management and
Case Study”, Hemisphere, Washington, 1980.
5. Bhide A.D., Sundaresan B.B., “Solid Waste Management – Collection Processing and
Disposal”, Mudrashilpa offset printers, Nagpur, 2001.
6. Gunther Seliger, Marwan, Khraisheh.K, Jawahir.I.S., “Advances in Sustainable
Manufacturing”, 2011.

PR7005 DESIGN OF CASTING AND WELDMENTS L T P C

3 0 0 3
OBJECTIVE:
 To impart knowledge to the students about the design principles of casting and welding.

76
UNIT I MELTING AND POURING 9
Principles of melting practice-fluxing- Degasification and inoculation- Types of furnaces- Crucibles,
Cupola, Oil fired furnaces – Electric arc and induction furnaces –Melting practice of cast iron, SG
iron, steel, aluminum and copper alloys.

UNIT II CASTING DESIGN 9

Solidification of pure metals and alloys-shrinkage in cast metals-design of sprue, runner, gate and
risers-problems in design and manufacture of thin and unequal sections - design for directional
solidification, minimum distortion and for overall economy - design problems of L,T,V,X and Y
junctions.

UNIT III WELD DESIGN 9

Design of welded components-symbolic representation of welds on drawings- residual stresses in
welds-weld distortions-design consideration-strength consideration of welded joints-analysis of
statistically loaded welded joints-welded structures subjected to fatigue loads

UNIT IV PHYSICAL METALLURGY OF WELDING 9

Welding of ferrous materials: Formation of different micro structural zones in welding of carbon
steels. Welding of C-Mn and low-alloy steels, phase transformations in weld and heat - affected
zones, cold cracking, role of hydrogen and carbon equivalent, formation of acicular ferrite and
effect on weld metal toughness.

UNIT V AUTOMATION 9
Layout of mechanized foundry – sand reclamation – material handling in foundry pollution control
in foundry –– Computer aided design of casting and Automation in welding – robot welding –
safety norms.
TOTAL: 45 PERIODS
OUTCOME:
 The students will become capable to employ the design principles of castings and
weldments in the industries.

TEXT BOOKS:
1. Parmar,R.S., Welding Processes and Technology, Khanna Publishers, 2006.
2. Jain,P.L., Principles of Foundry Technology, Tata McGraw Hill, 2006.

REFERENCES:
1. A.S.M Hand book, vol 15, casting, ASM international, 1988.
2. Klas Weman, welding processes hand book, CRC press, 2003.
3. Cary and Howard,B., Modern Welding Technology, Prentice-Hall, 1989.
4. Heine, R.W., Loper.L.R., and Rosenthal,C, Principles of Metal Casting, Tata McGraw Hill,
1986.
5. ASM Handbook vol.6, welding Brazing & Soldering, 2003.

PR 7006 DESIGN OF JIGS, FIXTURES AND DIES L T P C

3 0 0 3

OBJECTIVES:
 To introduce the concepts of various types of jigs, fixtures and dies.
 To design jig / fixture/ die for a given component.

UNIT I LOCATION AND CLAMPING DEVICES IN JIGS AND FIXUTRES 9

Principles of Jigs and Fixture – Design concepts – Different types of locating devices – different
types of clamps – Drill bushes – types – Elements of fixtures.

77
UNIT II DESIGN OF JIGS AND FIXTURES 9
Design concepts of Template Jig, Plate Jig, Sandwich Jig, Vice Jaw Jig, Latch Jig, Turnover Jig,
Box Jig – Design of Jigs, Fixtures for Milling, Grinding, Turning, Welding, and Assembly – Modular
fixtures.

UNIT III CONCEPTS OF DIES AND ITS ELEMENTS 9

Design concepts of the following elements of progressive, compound and Combination dies – Die
block – Die shoe – Bolster plate – punch – punch plate – punch holder – guide pins and guide
bushes – strippers – knockouts – stops - pilots – selection of standard die sets – strip layout and
development.

UNIT IV DESIGN OF DIES 9

Design of Blanking, Piercing, lancing, notching and bending dies, Design features of dies for
drawing, extrusion, wire drawing and forging, Design of Progressive die – compound die –
combination die- Bending and drawing dies

UNIT V CASE STUDIES IN JIGS, FIXTURES AND DIES 9

Drill Jigs – Milling fixtures- Progressive die – compound die –combination die- Bending and
drawing dies
TOTAL: 45 PERIODS
OUTCOMES:
 Elements of various work holding devices and dies are learnt by the students.
 Process for designing dies, jigs and fixtures are taught.

TEXT BOOKS:
1. Edward G.Hoffman, “Jigs and Fixtures Design”,Thomson-Delmar Learning,
Singapore,2004.
2. Venkataraman.K ,”Design of Jigs Fixtures and Press Tools” ,Wiley press, Ane Books, Pvt
Ltd, 2015.

REFERENCES:
1. Jones.E.J.H. “Jigs and Tool Design”, Ballou Press, 2009.
2. Paquin.J.R.,Crowley.R.E.,”Die Design Fundamentals”, Industrial Press Inc, New York,
1987.
3. Henriksen, Erik karl, “Jigs and Fixtures Design Manual”, Industrial Press Inc, New York,
1973.
4. Joshi.P.H., ”Design of Jigs and Fixtures”, McGraw-Hill Education India, 2013.
5. Balachandran.V., “Design of Jigs Fixtures and Press Tools”, Motion Press, India, 2015.

PR7007 GREEN ELECTRONICS MANUFACTURING L T P C

3 0 0 3
OBJECTIVE:
 This course aims to provide students with knowledge on the theories, eco-design concepts,
methods, and relevant hands-on experience for designing a range of sustainable green
electronic products. It is expected that students will develop their ability to address relevant
issues on environmental impact; product design, operating life, and the 3R concept
(reduce, reuse, and recycle).

UNIT I INTRODUCTION TO GREEN ELECTRONICS 9

Environmental concerns of the modern society- Overview of electronics industry and their relevant
regulations in China, European Union and other key countries- global and regional strategy and
policy on green electronics industry. Restriction of Hazardous substances (RoHS) - Waste Electrical
and electronic equipment (WEEE - Energy using Product (EuP) and Registration - Evaluation,
Authorization and Restriction of Chemical substances (REACH).

78
UNIT II GREEN ELECTRONICS MATERIALS ANDPRODUCTS 9
Introduction to green electronic materials and products - Lead (Pb) -free solder pastes, conductive
adhesives, halogen-free substrates and components. Substitution of non-recyclable thermosetting
polymer based composites with recyclable materials X-Ray Fluorescence (XRF) for identifying
hazardous substances in electronic products

UNIT III GREEN ELECTRONICS ASSEMBLY AND RECYCLING 9

Various processes in assembling electronics components - the life-cycle environmental impacts of
the materials used in the processes - substrate interconnects . Components and process
equipments used. Technology and management on e-waste recycle system construction, global
collaboration, and product disassembles technology.

UNIT IV PRODUCT DESIGN AND SUSTAINABLE ECO-DESIGN 9

Stages of product development process in green design: Materials- Manufacturing - Packaging and
use - End of Life and disposal - Design for recycling - Life Cycle Assessment (LCA), and Eco-design
tools - Environmental management systems, and International standards - Eco-design in electronics
industry

UNIT V CASE STUDIES 9

Reliability of green electronics systems , Reuse and recycle of End-of-Life(EOL) electrical and
electronic equipment for effective waste management – Introduction of Green Supply Chain, and
Modeling green products from Supply Chain point of view - A life-cycle assessment for eco-design of
Cathode Ray Tube Recycling.
TOTAL: 45 PERIODS
OUTCOME:
 An outline of the regulations on electronics in key countries is provided.
 A detailed study of electronic materials, their assembly and recycling is taught.

TEXT BOOKS:
1. Lee H.Goldberg and Wendy Middleton, “Green Electronics/ Green Bottom Line”, Newnes
Publications ,2000.
2. Sammy G. Shina, “Green Electronics Design and Manufacturing”, McGraw Hill., 2008.

REFERENCES:
1. David Austen, “Green Electronic Morning”, Ingleby Gallery, 2006.
2. Yuhang yang and Maode Ma, “Green Communications and Networks”, Springer
Publication., 2014.
3. John Hu. Mohammed Ismail, “CMOS High Efficiency on – Chip Power Management”,
Springer Publications 4th edition, 2011.

PR7008 LEAN MANUFACTURING L T P C

3 0 0 3
OBJECTIVES:
 To study the various tools for lean manufacturing (LM).
 To apply the above tools to implement LM system in an organization.

UNIT I INTRODUCTION TO LEAN MANUFACTURING 9

Conventional Manufacturing versus Lean Manufacturing – Identification and Elimination of wastes
in all forms - Principles of Lean Manufacturing – Basic elements of lean manufacturing –
Introduction to LM Tools.

79
UNIT II CELLULAR MANUFACTURING, JIT and TPM 9
Cellular Manufacturing – Types of Layout, Principles of Cell layout, Implementation. JIT –
Principles of JIT and Implementation of Kanban. TPM – Pillars of TPM, Principles and
implementation of TPM.

UNIT III SET UP TIME REDUCTION, TQM, 5S and VSM 9

Set up time reduction – Definition, philosophies and reduction approaches. TQM – Principles and
implementation. 5S Principles and implementation - Value stream mapping - Procedure and
principles, EOQ, EPQ.

UNIT IV SIX SIGMA 9

Six Sigma – Definition, statistical considerations, variability reduction, design of experiments – Six
Sigma implementation

UNIT V CASE STUDIES 9

Various case studies of implementation of lean manufacturing at industries.
TOTAL: 45 PERIODS
OUTCOMES:
 The various aspects of lean manufacturing are taught.
 Six sigma and some case studies are taught to the students.

TEXT BOOKS:
1. Ronald G. Askin and Jeffrey B. Goldberg, “Design and Analysis of Lean
Production Systems”, John Wiley and Sons, 2003.
2. Lonnie Wilson, “How to Implement Lean Manufacturing”, McGraw-Hill Professional; 1
edition, 2009.

REFERENCES:
1. Rother M. and Shook J, “Learning to See: Value Stream Mapping to Add Value and
Eliminate Muda” , Lean Enterprise Institute, Brookline, MA.1999.
2. Mikell P. Groover, “Automation, Production Systems and Computer-Integrated
Manufacturing”, 3rd Edition, 2007.

PR7009 MICRO ELECTRO MECHANICAL SYSTEMS AND NANO L T P C

TECHNOLOGY 3 0 0 3
OBJECTIVE:
 To expose the students to the evolution of micro electromechanical systems, to the various
fabrication techniques and to make students to be aware of micro actuators.

UNIT I MATERIALS FOR MEMS AND MINIATURISATION 9

Definition – historical development – fundamentals – Scaling laws in miniaturization – Rigid Body
dynamics, Electrostatic Forces, Electromagnetic properties, Electricity, diffusion property, optical
property and Heat Transfer, Materials for MEMS and Microsystems – Si, Si compounds, Si
Piezoresistors, GaAs, Quartz, Piezoelectric Crystals and Polymers – Doping of semiconductors –
diffusion process.

UNIT II FABRICATION PROCESSES 9

Photolithography – photo resist applications, light sources and postbaking – Ion implantation –
diffusion process – oxidation – thermal oxidation, silicon dioxide, oxidation rate, oxide thickness by
colour – chemical vapour deposition – enhanced CVD – Physical vapour deposition – sputtering –
deposition by epitaxy – etching – chemical and plasma etching. Bulk micromanufacturing – wet
etching, dry etching and etch stop – surface micromachining – LIGA process – SLIGA process.
80
UNIT III MICROSYSTEM – WORKING PRINCIPLE AND PACKAGING 9
Microsensors – Optical, Pressure, Acoustic wave and Thermal sensors – Microactuation – thermal
forces, shape memory alloys, piezoelectric crystals and Electrostatic Forces – MEMS with
microactuators – Microgripper, Micromotor, microvalves and micropumps – Microaccelerometers –
Microfluidics – micromirror array for video projection – Microsystem packaging – die level, device
level and system level – Interfaces – Die preparation – surface bonding- wire bonding – sealing –
Assembly of Microsystems – selection of packaging materials – signal mapping and transduction –
pressure sensors packaging.

UNIT IV MICROSYSTEMS DESIGN 9

Static bending of thin plates – Mechanical Vibration – thin film mechanics – Design considerations
– constraints, selection of materials, selection of Manufacturing processes, selection of signal
transduction, electromechanical system and packaging – Process design – Mechanical Design
Thermomechanical loading, Thermomechanical stress analysis, Dynamic Analysis and Interfacial
fracture Analysis – simulation of Microfabrication process – Design of a Si die for a micropressure
sensor – Fluid resistance in Microchannels – capillary electrophoresis network systems – Design
of MEMS cell gripper – MOEMS – CMOS.

UNIT V NANO TECHNOLOGY 9

Classification of nano structures – effect of the nanometer length scale effects of nano scale
dimensions on various properties – structural, thermal, chemical, mechanical, magnetic, optical
and electronic properties – effect of nanoscale dimensions on biological systems. Fabrication
methods – Top down processes – bottom up process – nano positioning systems.

TOTAL: 45 PERIODS
OUTCOMES:
 Advantages of miniaturization, top-down micro-manufacturing techniques like lithography
are taught.
 Design of micro-electromechanical systems is learnt by the students.

TEXT BOOKS:
1. Tai– Ran Hsu, “MEMS and Microsystems Design and Manufacture”, Tata-McGraw Hill,
New Delhi, 2002.
2. Norio Taniguchi, “Nano Technology Oxford University Press”, New York, 2003

REFERENCES:
1. Mark Madou, “Fundamentals of Microfabrication”, CRC Press, New York, 1997.
2. “The MEMS Hand book”, Mohammed Gad-el-Hak, CRC Press, New York
3. Charles P Poole, Frank J Owens, “Introduction to Nano Technology”, John Wiley and
Sons, 2003
4. Julian W. Hardner, “Micro Sensors, Principles and Applications”, CRC Press 1993.
5. Ananthasuresh G.K. Vinoy K.J. Gopalakrishnan S. Bhat K.N and Aatre V.K., “Micro
6. and smart systems”, Wiley India Pvt. Ltd., New Delhi, 2010
7. AkhleshLakhtakia , “The Hand Book of Nano Technology, Nanometer
8. Structure”, Theory, Modeling and Simulations, Prentice-Hall of India (P) Ltd., New
Delhi, 2007.
9. Rai-choudhury. P, “MEMS and MOEMS Technology and Application”, PHI, New Delhi,
2009.

81
PR7010 MICROMACHINING AND FABRICATION L T P C
3 0 0 3
OBJECTIVE:
 To introduce the various types of micromachining processes and their Applications.

UNIT I INTRODUCTION 9
Introduction to micromachining process – Classification of micromachining and nanomachining
processes – Molecular dynamics (MD), principle of molecular dynamics simulation potential
energy function – Boundary condition – MD simulation procedure.

UNIT II MICROFABRICATION METHODS 9

Methods of microfabrication –– Electro deposition, Chemical vapour deposition, physical vapour
deposition – Electro Chemical spark deposition – LIGA (Lithographie, Galvanoformung,
Abformung) process.

UNIT III MECHANICAL MICROMACHINING 9

Ultrasonic machining – Abrasive jet machining – Abrasive water jet machining, water jet machining
– Beam energy micromachining – Electron beam machining, electro discharge machining, ion
beam machining, focused ion beam machining.

UNIT IV MICROMACHINING AND NANO FUNCTIONING WITH ABRASIVE FLOW 9

Process principle and description – Process Technology Selection of machine Effect of process
parameter on performance – Mechanism of materials removal Magneto Rheological
Nanofunctioning Process. Nano functioning – Smart Rheological fluids – Magneto Rheological
polishing fluid – Rheological characteristics of MR fluid – MR Abrasive Flow Finishing Process –
MR Jet Finishing technology .

UNIT V HYBRID MICRO MACHINING 9

Chemical Mechanical polishing – Electro chemical spark micro machining – Electro discharge
grinding – Electrolytic in process dressing – Application.
TOTAL: 45 PERIODS
OUTCOME:
 Various modern micromachining and fabrication methods are learnt by the students.

TEXT BOOKS:
1. Jain.V.K.,”Introduction to Micromachining”, Narrosa Publishing house, 2nd edition 2014.
2. Mojtaba Kahrizi, “Micromachining Techniques for Fabrication of Micro and Nano
Structures”, InTech, Chapters published, 2012.

REFERENCES:
1. Sami Franssito, “Introduction to Micro fabrication”, John wiley and sons, 2nd edition 2010.
2. Jain V.K., “Advanced machining process”, Allied Publisher, Delhi, 2002.
3. Mohammed Gad-el-Hat,”The MEMS Hand book”, CRC Press, 2nd edition, 2006.

PR7011 MODERN CONCEPTS IN MANUFACTURING L T P C

3 0 0 3
OBJECTIVE:
 The objective of this course is to familiarize the students about the contemporary
manufacturing techniques being employed widely in industries

82
UNIT I LEAN MANUFACTURING 9
Objectives of lean manufacturing-key principles and implications of lean manufacturing -traditional
Vs lean manufacturing- flow-continuous improvement/Kaizen –worker involvement- 5S principles-
elements of JIT - uniform production rate - Kanban system - Lean implementation, Reconciling
lean with other systems - lean six sigma- lean and ERP - lean with ISO 9001:2000.

UNIT II AGILE MANUFACTURING 9

The Agile Production Paradigm – Agile Manufacturing Vs Mass Manufacturing - Agile Practices -
Agile practice for product development - Manufacturing agile practices - Implementing new
technology - A checklist, technology applications that enhance agility - agile technology make or
buy decisions. - Costing for Agile Manufacturing practices - Creating the learning factory:
Imperative for success, factory becoming a learning factory, building a road map for becoming a
learning factory

UNIT III GREEN MANUFACTURING 9

Introduction to Green Manufacturing- impact of manufacturing in environmental ecology - green
manufacturing strategies - Principles of green manufacturing and its efficiency – System model
architecture and module- design and planning- control or tools for green
manufacturing.(Qualitative Analysis, Consumption Analysis, Life Cycle Analysis, Efficiency,
Sustainability tools). - Enabling techniques for assuring green manufacturing - Carbon footprint
analysis and management of manufacturing processes

UNIT IV ADDITIVE MANUFACTURING 9

Overview- Additive Manufacturing Technology in product Development - CAD and Reverse
Engineering - Data Processing for Additive Manufacturing Technology: CAD model preparation –
Stereolithography – Stereo lithography Apparatus (SLA)- Principle, process, advantages and
applications - Powder Based Additive Manufacturing Systems - Selective Laser Sintering –
Principles of SLS process - Process, advantages and applications

UNIT V INTELLIGENT MANUFACTURING 9

Goals of AI in manufacturing- Methods for production equipment selection and layout, Heuristic
scheduling of multiple resources, Fuzzy multiple attribute decision making methods- Application of
neural networks and fuzzy sets to machining and metal forming.
TOTAL: 45 PERIODS
OUTCOME:
 The students are taught the five modern manufacturing techniques that will equip them in
understanding process of manufacturing in day today industries.

TEXT BOOKS
1. Kusiak, Andrew , “Intelligent Manufacturing Systems”, Prentice Hall ,1st edition, 1990.
2. Badiru A.B., “Expert Systems Applications in Engineering and Manufacturing”, Prentice-
Hall, New Jersey, 1st edition, 1992.

REFERENCES
1. Black .J.T. and Kohser R.A, “DeGarmo’s Materials and Processes in Manufacturing”,
Published by Wiley, 11th edition, 2011.
2. John Schey, “Introduction to Manufacturing Processes”, Tata McGraw-Hill Education ,3rd
edition,1999 .
3. Christian N. Madu, “Handbook of environmentally conscious manufacturing”, Springer US
Publishers, 1st edition, 2001.
4. Rao R. V, “Advanced Modeling and Optimization of Manufacturing Processes”, 2nd edition,
2006.
5. Ronald G. Askin and Jeffrey B. Goldberg, “Design and Analysis of Lean Production
Systems”, John Wiley and Sons, 2003.
6. Chowdiah.M.P., “Agile Manufacturing”, IK International Publishing House Pvt Ltd, 2011.

83
PR7012 MODERN PRODUCTION TECHNIQUES L T P C
3 0 0 3
OBJECTIVE:
 To introduce the modern production techniques and their applications.

UNIT I RAPID PROTOTYPING AND RAPID TOOLING 9

Introduction-need- Development of Rapid Prototyping (RP) systems-RP process chain –
Stereolithography -Fused Deposition Modeling- Laminated Object Manufacturing – 3 D Printing –
Working Principle – Process Parameters – Advantages – Disadvantages – Applications – Rapid
Tooling – Classification – Fabrication processes –Applications .

UNIT II ADVANCED CASTING AND WELDING PROCESSES 9

Stir Casting – Squeeze casting –process parameters -advantages-disadvantages – applications -
Application of Ultrasonic Cavitations in Stir casting and Squeeze casting to produce metal matrix
nanocomposites - Friction stir welding – Under water welding – Explosive welding – Metallizing –
Hard facing – Spray welding - process parameters-advantages-disadvantages-applications.

UNIT III POWDER METALLURGY 9

Conventional methods and modern methods of metal powder manufacture - Blending techniques -
Powder characterization -Powder compaction - Mechanical, thermal and thermo-mechanical
compacting processes - Sintering mechanisms - Types of sintering furnaces -Manufacturing and
application of powder metallurgy components - Bearings, Metallic filters, Magnets and Friction
materials.

UNIT IV MANUFACTURING SUPPORT SYSTEMS 9

Advanced Manufacturing Planning -Aggregate Production Planning and the Master Production
Schedule – Material Requirements Planning I - Material Requirements Planning II - Enterprise
Resource Planning - Capacity Planning - Inventory Control.

UNIT V QUALITY MANAGEMENT 9

Software Quality Management – Metrics used for Software Quality Management – Capability
Maturity Model Integration (CMII) – Case studies - Six Sigma – Concepts and Implementation –
Case studies –Service Quality Management – Case studies.
TOTAL:45 PERIODS
OUTCOMES:
 The students are familiarized with the recent advances in production techniques.
 The students acquire the ability to apply the modern production techniques in industries.
TEXTBOOKS:
1. Andreas Gebhardt, “Rapid prototyping”, Hanser Gardener Publications,1st edition, 2003
2. John Campbell, ”Complete casting-Handbook”, Elsevier publication, 2011

REFERENCES:
1. Ali K. Kamrani, EmadAbouel Nasr, “Rapid Prototyping: Theory and practice”,
Springer, 2010.
2. Henry Ericsson Thesis,”Handbook of metal forming Processes”, CRC press, 1999.
3. John Norrish ,”Advanced Welding Processes: Technologies and Process Control”,
Woodhead Pub., 2006.
4. Randall German, “A-Z of Powder Metallurgy”, Elsevier, 2005.
5. Kanishka Bedi, ”Quality Management”, Oxford University Press, 2008.

84
PR 7013 NON DESTRUCTIVE TESTING METHODS L T P C
3 0 0 3
OBJECTIVES:
 To understand principle behind various NDT techniques.
 To learn working procedures of various NDT techniques.

UNIT I NON-DESTRUCTIVE TESTING: AN INTRODUCTION 9

Introduction to various non-destructive methods – Comparison of Destructive and Non destructive
Tests, Visual Inspection, Optical aids used for visual inspection, Applications.

UNIT II LIQUID PENETRANT TESTING AND MAGNETIC PARTICLE TESTING 9

Physical principles, procedure for penetrant testing, Pentrant testing materials, Penetrant testing
methods – Applications Principle of MPT, Magnetising technical and procedure used for testing a
component, Equipment used for MPT, Applications
UNIT III EDDY CURRENT TESTING AND ACOUSTIC EMISSION TESTING 9
Principles, Instrumentation for ECT, Various Techniques – High sensitivity Techniques, Single,
Multi and high frequency ECT, Applications Principle of AET, AE signal parameters, Applications.
UNIT IV ULTRASONIC TESTING 9
Principle, Ultrasonic transducers, Inspection Methods – Normal incident pulse-echo Inspection,
through – transmission testing, angle Beam Pulse-echo testing, Techniques A-Scan, B-Scan , C-
Scan – Applications.
UNIT V RADIOGRAPHY, COMPARISON AND SELECTION OF NDT METHODS 9
Basic principle, Effect of radiation of Film, Radiographic Imaging – Inspection Techniques – Single
wall single image, Double wall Penetration and Multiwall Penetration technique – Comparison and
selection of various NDT techniques.
TOTAL: 45 PERIODS
OUTCOME:
 NDT techniques widely used in industries are learnt by the students.
TEXT BOOKS:
1. Baldev Raj, Jeyakumar. T, Thavasimuthu. M. , “Practical Non-Destructive Testing”, Narosa
Publishing house, New Delhi, 3rd edition, 2015.
2. Peter J. Shull, “Non Destructive Evaluation: Theory, Techniques and Application”, Marcel
Dekker, Inc., New York, 2nd edition, 2002
REFERENCES:
1. Krautkramer.J, “Ultrasonic Testing of Materials”, 4th Edition, Springer – Verlag
Publication, New York, 1996.
2. Baldev Raj and B.Venkataraman, “Practical Radiology”, Narosa Publishing House,
2011.
3. Birchan.B, “Non-Destructive Testing”, Oxford, London, 1975.

PR7014 PROCESSING OF PLASTICS AND POLYMERS L T P C

3 0 0 3
OBJECTIVE
 To expose the students to the basics of plastics and polymers processing

UNIT I INTRODUCTION TO PLASTICS 9

Plastics – Classification – Structure – Properties of Thermo plastics – Properties of Thermosetting
Plastics – Engineering Plastics, Specialty Plastics and High temperature plastics. Properties and
application of Epoxy, polyester, PMMA, PEEK, Poly propylene, polymide, phenolics,
polyetherimide – Merits and Disadvantages.
85
UNIT II INTRODUCTION TO POLYMERS 9
Chemistry and Classification of Polymers – Glass transition temperature, thermal expansion and
its effects, molecular weight, stress strain behaviour . Types of polymers - plastics and rubbers .
Applications of various types of polymers.

UNIT III PROCESSING OF PLASTICS AND POLYMERS 9

Extrusion - Injection Moulding –Thermoforming – Compression moulding - Transfer moulding –
Blow molding - reaction injection molding - pultrusion – calendaring - rotational molding - Rubber
processing in two-roll mill, internal mixer.

UNIT IV POLYMER MIXING AND BLENDING 9

Introduction - mechanism of mixing and dispersion - mixing of solid-solid - liquid-liquid and liquids-
solids - dispersive mixing distributive mixing - laminar mixing - overview of polymer mixing and
blending machinery.

UNIT V POLYMER TESTING 9

Mechanical-static and dynamic: tensile, flexural, compressive, abrasion, endurance, fatigue,
hardness, tear, resilience, impact, toughness. Conductivity-thermal and electrical, dielectric
constant, dissipation factor, power factor, electric resistance, Surface resistivity, volume resistivity,
swelling, ageing resistance, environmental stress, Cracking resistance.
TOTAL: 45 PERIODS
OUTCOME:
 Knowledge of uses and techniques of plastics and polymer processing are well known to
the students.

TEXT BOOKS:
1. Brent Strong. A, “Plastics Materials and Processing”, Pearson Prentice Hall, Inc., New
Jersey, 3rd Edition, 2005.
2. Jean-Michel Charrier ,“Polymer materials and Processing: Plastics, Elastomers, and
Composites” ,Hanser Publishing, Munich Vienna New York.

REFERENCES:
1. Krishnan K Chawla , “Composite Material Science and Engineering”, International Edition,
Springer, 2006.
2. Horald Belofsky, " Plastics Product design and Process Engineering”, Hanser
Publications,2002.
3. Charles A. Harper,”Modern Plastics HandBook”, McGraw-Hill, New York,1999.
4. Anand. J.S, ”Applications of Plastics”, CIPET,Chennai,1997

PR7015 PRODUCTION OF COMPOSITES L T P C

3 0 0 3
OBJECTIVE
 To enlighten the students about the various composite production methods

UNIT I INTRODUCTION TO COMPOSITES 9

Definition and fundamentals of composites – need for composites – enhancement of
properties - Reinforcement, classification, general characteristics, rule of mixture – Theory of
composites – Mechanical behavior – Stress strain relationships. Applications of various types of
composites.

86
UNIT II INTRODUCTION TO FIBRES AND COMPOSITE MATERIALS 9
Fibres – Types, Fabrication, Structure, properties and applications – Glass, Boron, carbon,
polyethylene, Kevlar, Aramid, Alumina, SiC ,Si3,N4, B4 C, ceramic and metallic fibers whiskers –
Matrix materials structure – Polymers – metals and ceramics – Physical and chemical properties.

UNIT III POLYMER MATRIX COMPOSITES 9

Open mould process, bag moulding, Hand layup and spray up techniques filament winding,
compression and transfer moulding, BMC and SMC– pultrusion – centrifugal casting – injection
moulding – structure, properties and application of PMC’s – Carbon Matrix Composites –
Interfaces – Properties – recycling of PMC.

UNIT IV METAL MATRIX COMPOSITES 9

Processing of MMCs: Types, Important metallic materials, Processing – solid state, Liquid state,
deposition, insitu fabrication methods. Interfaces – diffusion bonding – powder metallurgy
technique - properties - Applications.

UNIT V CERAMIC MATRIX COMPOSITES 9

Ceramic matrix materials – Processing – Hot pressing, liquid infiltration techniques lanxide
process, Insitu, solgel, chemical reaction techniques - CVD, CVI process. Interface in CMCs.
Thermal shock resistance. Applications. Properties. Surface treatment.
TOTAL: 45 PERIODS
OUTCOME:
 Knowledge about various composites Processing Techniques are well known to the
students.

TEXT BOOKS:
1. Mallick P.K., "Fiber-Reinforced Composites: Materials, Manufacturing, and Design", Third
Edition, CRC Press, Taylor & Francis group, 2007.
2. Krisnan K Chawla, “Composite materials science and engineering”, International edition,
Springer, 2006

REFERENCES:
1. T.W.Clync and P.J. Withers, “Introduction to Metal Matrix Composites”. Cambridge
University Press, 1993.
2. B.Strong, “Fundamentals of composite manufacturing”, SME, 1989
S.C.Sharma, “Composite materials”, Narosa publications, 2000
3. “Short term course on advances in composite materials”, “composite technology
centre, Department of Metallurgy, IIT – Madras, December 2001.
4. Weatherhead R.G. “FRP technology” (Fibre Reinforced Resin System), Applied
Science Publishers Limited, London, 1990.
5. Chawla K.K. “Composite Materails”, Springer Verlag, 1987
6. Mathews F.L. and Rawlings R.D., “Composite materials, Engineering and Science”,
Chapman. Woodhead Publishing, 1999.
7. Kenneth G.Budinski and Michael K. Budinski, “Engineering Materials”, Prentice Hall of
India pvt ltd., 4th Indian reprint, 2002.

PR7016 PURCHASING AND MATERIALS MANAGEMENT L T P C

3 0 0 3
OBJECTIVE:
 To introduce the various aspects of Purchasing And Materials Management and other
practice.

87
UNIT I FUNCTIONS OF MATERIALS MANAGEMENT 9
Introduction to materials management – objectives – organization – Functions operating cycle –
value analysis – make or buy decisions.

UNIT II PURCHASING MANAGEMENT 9

Purchasing policies and procedures – Selection of sources of supply – Vendor development –
Vendor evaluation and rating – Methods of purchasing – Imports – Buyer – Seller relationship –
Negotiations.

UNIT III STORES MANAGEMENT 9

Store function – Location – Layout – Stock taking – Materials handling – Transportation –
Insurance – Codification – Inventory pricing stores management – safety – warehousing.

UNIT IV INVENTORY MANAGEMENT 9

Forecasting – ABC analysis – Materials requirements planning – systems – Quantity – periodic –
deterministic and probabilistic models – Aggregate planning – JIT.

UNIT V QUANTITATIVE TECHNIQUES IN MATERIAL MANAGEMENT 9

Finite Production – Lot size under constraints – Application of O.R. Techniques in Materials
Management.
TOTAL: 45 PERIODS
OUTCOME:
 Students are taught various aspects of materials purchasing and management

TEXT BOOKS:
1. Lamar Lee and Donald W.Dobler, “Purchasing and Material Management”, Texland cases,
Tata McGraw Hill, 1996.
2. Kesavan.R, Elanchezhian.C and Vijaya Ramnath.B, “Engineering Management”, Eswar Press.
2005.

REFERENCES:
1. Gopalakrishnan P., “Handbook of Materials Management”, Prentice Hall of India, 1996.
2. Gupta P.K. and Man Mohan, “Problems in Operations Research”, Sultan chand and Sons,
1994.

PR7017 SELECTION OF MATERIALS L T P C

3 0 0 3
OBJECTIVE:
 By considering various constraints like material chart, process attributes, Material cost,
recyclability, materials are selected for the engineering components.

UNIT I MATERIALS AND PROPERTIES 9

Classes of engineering materials - Evolution of Engineering Materials-Definition of materials
properties- Displaying material properties using materials selection charts- Forces for change in
materials selection and design, Materials and the environment.

UNIT II FACTORS IN SELECTION PROCESS 9

Design process - types of design, design requirements, function, Material attributes. Shape and
Manufacturing processes - Materials processing and design processes and their influence on
design, Process attributes, Systematic process selection, Process selection diagrams, Process
cost, Energy consumption for production, Material costs, availability and recyclability,
Environmental consideration.

88
UNIT III MATERIALS SELECTION PROCESS 9
Materials selection methods: Screening, Ranking - weighted ranking, Performance indices -
Materials selection charts, Deriving property limits and material indices, Structural indices. Shape
factors, Efficiency of standard sections, Material limits for shape factors, Material indices which
include shape-microscopic or micro structural shape factor, Co-selecting material and shape.

UNIT IV ALTERNATE MATERIALS 9

Environmental design, Economics and environmental impact of materials, Hybrid materials:
composites, sandwich structure, lattices and segmented structure, applications of hybrid materials,
polymer foams.

UNIT V CASE STUDIES 9

Automobile materials (Body and Crank shaft), Marine structural materials (Hull and Propeller),
Aircraft structural materials (Wings and landing gears), Materials for space (Gas turbines and
Nose), Materials for power generation machinery (Boilers and Pressure vessels), Materials for
medical applications (Surgical knives and Bone replacements), Chemical and petrochemical
industries (Acid storage tanks and Fuel carrying pipes).
TOTAL: 45 PERIODS
OUTCOME:
 The students will get familiarized with basic materials science and how to select
engineering materials for various applications.

TEXT BOOKS:
1. Ashby. M.F., “Materials Selection in Mechanical Design”, Third edition, Butterworth- Heineman,
New York, 16th edition, 2012.
2. Charles. J. A. and Crane. F. A. A, “Selection and Use of Engineering Materials”, second
edition, Butterworth-Heinemann Ltd., 3rd edition 2005.

REFERENCES:
1. Dieter. G. E, “Engineering Design: A Materials and Processing Approach”, 5th Edition, McGraw-
Hill, 2007.
2. “ASM Handbook, Volume 20: Materials Selection and Design”, ASM International, 2010.
3. Petroski. H, “Invention by Design”, Harvard University Press, 1997.
4. Budinski. K. G., Budinski. M. K., “Engineering Materials: Properties and Selection”, 2th edition,
Prentice Hall, 9th edition, 2010.
5. Mahmoud M.Farag, “Materials and Process Selection for Engineering Design”, CRC Press,
New York, 2nd edition, 2007.

PR7018 SUPPLY CHAIN MANAGEMENT L T P C

3 0 0 3
OBJECTIVE:
 To teach the basic principles of supply chains and associated logistics management

UNIT I INTRODUCTION 9
Role of Logistics and Supply chain Management: Scope and Importance – Evolution of Supply
Chain – Decision Phases in Supply Chain – Competitive and Supply chain Strategies – Drivers of
Supply Chain Performance and Obstacles.

UNIT II SUPPLY CHAIN NETWORK DESIGN 9

Role of Distribution in Supply Chain – Factors influencing Distribution network design – Design
options for Distribution Network Distribution Network in Practice-Role of network Design in Supply
Chain – Framework for network Decisions.

89
UNIT III LOGISTICS IN SUPPLY CHAIN 9
Role of transportation in supply chain – factors affecting transportations decision – Design option
for transportation network – Tailored transportation – Routing and scheduling in transportation.

UNIT IV SOURCING AND COORDINATION IN SUPPLY CHAIN 9

Role of sourcing supply chain supplier selection assessment and contracts – Design collaboration
– sourcing planning and analysis – supply chain co-ordination – Bull whip effect – Effect of lack of
co-ordination in supply chain and obstacles – Building strategic partnerships and trust within a
supply chain.

UNIT V SUPPLY CHAIN AND INFORMATION TECHNOLOGY 9

The role IT in supply chain – The supply chain IT frame work Customer Relationship Management
– Internal supply chain management – supplier relationship management – future of IT in supply
chain – E-Business in supply chain.
TOTAL:45 PERIODS
OUTCOME:
 The student would understand the framework and scope of supply chain networks and
functions.

TEXT BOOKS:
1. Sunil Chopra, Peter Meindl, “Supply Chain Management, Strategy, Planning and operation”,
Pearson Education, 2015.
2. Srinivasan G, “Quantitative models in Operations and Supply Chain management”, PHI 2010.
REFERENCES:
1. Jeremy F. Shapiro, “Modeling the supply chain”, 2nd edition, Thomson Duxbury 2006.
2. James B. Ayers, “Handbook of supply chain management”, Auerbach Publications, 2nd edition,
2006.

PR7019 TOTAL QUALITY MANAGEMENT: PRINCIPLES AND APPLICATIONS L T P C

3 0 0 3

OBJECTIVES
 To understand the various principles, practices of TQM to achieve quality.
 To learn the various statistical approaches for Quality control.
 To understand the TQM tools for continuous process improvement.
 To learn the importance of ISO and Quality systems

UNIT I INTRODUCTION 9
Introduction - Need for quality - Evolution of quality - Definition of quality - Dimensions of product
and service quality - Basic concepts of TQM – TQM Framework - Contributions of Quality Gurus –
Barriers to TQM – Cost of Quality.

UNIT II TQM PRINCIPLES 9

Quality statements - Customer focus –Customer orientation, Customer satisfaction, Customer
complaints, Customer retention - Continuous process improvement – PDCA cycle, 5s, Kaizen -
Supplier partnership – Partnering, Supplier selection, Supplier Rating.

UNIT III TQM TOOLS & TECHNIQUES I 9

The seven traditional tools of quality – New management tools – Six-sigma: Concepts,
methodology, applications to manufacturing, service sector including IT – Bench marking –
Reason to bench mark, Bench marking process – FMEA – Stages, Types.

90
UNIT IV TQM TOOLS & TECHNIQUES II 9
Quality circles – Quality Function Deployment (QFD) – Taguchi quality loss function – TPM –
Concepts, improvement needs – Performance measures - BPR.

UNIT V QUALITY SYSTEMS 9

Need for ISO 9000- ISO 9000-2000 Quality System – Elements, Documentation, Quality auditing
QS 9000 – ISO 14000 – Concepts, Requirements and Benefits –Quality Council – Leadership,
Employee involvement – Motivation, Empowerment, Team and Teamwork, Recognition and
Reward.
TOTAL : 45 PERIODS
OUTCOME:
 The student would be able to apply the tools and techniques of quality management to
manufacturing and services processes.

TEXT BOOK:
1. Dale H.Besterfiled, Carol B.Michna,Glen H. Besterfield,Mary B.Sacre,Hemant Urdhwareshe
and Rashmi Urdhwareshe, “Total Quality Management”, Pearson Education Asia, Revised
Third Edition, Indian Reprint, Sixth Impression,2013.

REFERENCES:
1. James R. Evans and William M. Lindsay, “The Management and Control of Quality”,
(6thEdition), South-Western (Thomson Learning), 2005.
2. Oakland, J.S. “TQM – Text with Cases”, Butterworth – Heinemann Ltd., Oxford, Third Edition
,2003.
3. Suganthi,L and Anand Samuel, “Total Quality Management”, Prentice Hall (India) Pvt. Ltd.,
2006 .
4. Janakiraman,B and Gopal, R.K, “Total Quality Management – Text and Cases”,Prentice Hall
(India) Pvt. Ltd., 2006.

PR7020 UNCONVENTIONAL MACHINING PROCESSES L T P C

3 0 0 3
OBJECTIVE:
 To impart knowledge to the students about various non-traditional machining processes.

UNIT I MECHANICAL ENERGY BASED PROCESSES 9

Abrasive Jet Machining (AJM) – Water Jet machining (WJM) - Abrasive Water Jet Machining
(AWJM) –Working Principle – equipments used – Process parameters – MRR – Applications -
Ultrasonic machining (USM) – Grain throwing and Grain hammering mechanisms.

UNIT II CHEMICAL AND ELECTRO CHEMICAL ENERGY

BASED PROCESSES 9
Chemical machining - Etchants – maskants - techniques of applying maskants – Process
Parameters – MRR – Applications – Chemical blanking – Chemical milling - Electro-Chemical
machining (ECM) –Principles of ECM – Equipments – MRR – Electrochemical Grinding (ECG) and
Electrochemical Honing (ECH) – Applications- Micro ECM.

UNIT III ELECTRICAL ENERGY BASED PROCESSES 9

Electric Discharge Machining (EDM) – working principle – equipments –Process Parameters –
MRR – Electrode- Power circuits – Tool Wear – Dielectric – Flushing – Wire cut – EDM –
Applications – Micro EDM.

91
UNIT IV THERMAL ENERGY BASED PROCESSES 9
Laser Beam machining (LBM) - Plasma Arc machining (PAM) - Electron Beam Machining (EBM) –
Ion Beam Machining (IBM) - Principle – Parameters – Equipment – Types– MRR -Applications.

UNIT V HYBRID MACHINING 9

Abrasive based hybrid machining processes - Thermal based hybrid machining processes -
Electro based hybrid machining processes – Vibration assisted EDM - Vibration assisted ECM.
TOTAL: 45 PERIODS
OUTCOME:
 The students will be in a position to select and employ an appropriate unconventional
machining process for a specific application in industries.
TEXT BOOKS:
1. Jain.V.K, “Advanced Machining Processes”, Allied Publishers Pvt.Ltd., New Delhi, 2002.
2. Hassan Abdel ,Gawad El, Hofy ,”Advanced Machining Processes”, Tata McGraw Hill, 2005.

REFERENCES:
1. Serope Kalpakjian, “Manufacturing Engineering and Technology”, Third Edition, Addison-
Wesley Publication, Co, 1995.
2. Brahem, T.Smith, “Advanced Machining”, I.F.S., U.K. 1989.
3. Amstead B.H., Ostwald Physics and Bageman, R.L., “Manufacturing Processes”, John Wileys
Songs 1987.
4. Benediet, G.F. Nontraditional Manufacturing Processes, Marcel Dekker Inc., New York 1987.
5. Pandey P.C. and Shan H.S., Modern Machining Processes, Tata McGraw Hill, New Delhi
,1980.

PR7022 MINI PROJECT L T P C

0 0 6 3
OBJECTIVES
 The students are encouraged to put forth their design ideas in their respective fields.

1. The students in batches (not exceeding three in a batch) have to take up a project in the area
of Production engineering.
2. Each batch is guided by a faculty member. The students have to select a suitable problem/
design, prepare the drawings, produce the components, assemble and commission the
project/develop a software with analysis.
3. The students have to prepare and present a detailed project report at the end of the VIII
Semester
4. The evaluation will be made for the continuous internal assessment for the Project by a
committee nominated by the Head of the Department.
TOTAL: 90 PERIODS
OUTCOME:
 The students have articulated their designs for industrial applications.

92
GE7072 FOUNDATION SKILLS IN INTEGRATED PRODUCT L T P C
DEVELOPMENT 3 0 0 3
OBJECTIVES:
 To understand the global trends and development methodologies of various types of
products and services
 To conceptualize, prototype and develop product management plan for a new product
based on the type of the new product and development methodology integrating the
hardware, software, controls, electronics and mechanical systems
 To understand requirement engineering and know how to collect, analyze and arrive
at requirements for new product development and convert them in to design
specification
 To understand system modeling for system, sub-system and their interfaces and
arrive at the optimum system specification and characteristics
 To develop documentation, test specifications and coordinate with various teams to
validate and sustain up to the EoL (End of Life) support activities for engineering
customer
UNIT I FUNDAMENTALS OF PRODUCT DEVELOPMENT 9
Global Trends Analysis and Product decision - Social Trends - Technical Trends-
Economical Trends - Environmental Trends - Political/Policy Trends - Introduction to
Product Development Methodologies and Management - Overview of Products and
Services - Types of Product Development - Overview of Product Development methodologies
- Product Life Cycle – Product Development Planning and Management.

UNIT II REQUIREMENTS AND SYSTEM DESIGN 9

Requirement Engineering - Types of Requirements - Requirement Engineering -
traceability Matrix and Analysis - Requirement Management - System Design & Modeling -
Introduction to System Modeling - System Optimization - System Specification - Sub-System
Design - Interface Design.
UNIT III DESIGN AND TESTING 9
Conceptualization - Industrial Design and User Interface Design - Introduction to Concept
generation Techniques – Challenges in Integration of Engineering Disciplines - Concept
Screening & Evaluation - Detailed Design - Component Design and Verification –
Mechanical, Electronics and Software Subsystems - High Level Design/Low Level Design
of S/W Program - Types of Prototypes, S/W Testing- Hardware Schematic, Component
design, Layout and Hardware Testing – Prototyping - Introduction to Rapid Prototyping and
Rapid Manufacturing - System Integration, Testing, Certification and Documentation

UNIT IV SUSTENANCE ENGINEERING AND END-OF-LIFE (EOL) SUPPORT 9

Introduction to Product verification processes and stages - Introduction to Product Validation
processes and stages - Product Testing Standards and Certification - Product Documentation
- Sustenance -Maintenance and Repair – Enhancements - Product EoL - Obsolescence
Management – Configuration Management - EoL Disposal

UNIT V BUSINESS DYNAMICS – ENGINEERING SERVICES INDUSTRY 9

The Industry - Engineering Services Industry - Product Development in Industry versus
Academia –The IPD Essentials - Introduction to Vertical Specific Product Development
processes -Manufacturing/Purchase and Assembly of Systems - Integration of Mechanical,
Embedded and Software Systems – Product Development Trade-offs - Intellectual Property
Rights and Confidentiality – Security and Configuration Management.

TOTAL: 45 PERIODS

93
OUTCOMES:
Upon completion of the course, the students will be able to:
 Define, formulate and analyze a problem
 Solve specific problems independently or as part of a team
 Gain knowledge of the Innovation & Product Development process in the Business
Context
 Work independently as well as in teams
 Manage a project from start to finish

TEXTBOOKS:
1. Book specially prepared by NASSCOM as per the MoU.
2. Karl T Ulrich and Stephen D Eppinger, "Product Design and Development", Tata McGraw
Hill, Fifth Edition, 2011.
3. John W Newstorm and Keith Davis, "Organizational Behavior", Tata McGraw Hill,
Eleventh Edition, 2005.

REFERENCES:
1. Hiriyappa B, “Corporate Strategy – Managing the Business”, Author House, 2013.
2. Peter F Drucker, “People and Performance”, Butterworth – Heinemann [Elsevier], Oxford,
2004.
3. Vinod Kumar Garg and Venkita Krishnan N K, “Enterprise Resource Planning –
Concepts”, Second Edition, Prentice Hall, 2003.
4. Mark S Sanders and Ernest J McCormick, "Human Factors in Engineering and Design",
McGraw Hill Education, Seventh Edition, 2013

GE7072 FOUNDATION SKILLS IN INTEGRATED PRODUCT L T P C

DEVELOPMENT 3 0 0 3

OBJECTIVES:
 To understand the global trends and development methodologies of various types of
products and services
 To conceptualize, prototype and develop product management plan for a new product
based on the type of the new product and development methodology integrating the
hardware, software, controls, electronics and mechanical systems
 To understand requirement engineering and know how to collect, analyze and arrive
at requirements for new product development and convert them in to design
specification
 To understand system modeling for system, sub-system and their interfaces and
arrive at the optimum system specification and characteristics
 To develop documentation, test specifications and coordinate with various teams to
validate and sustain up to the EoL (End of Life) support activities for engineering
customer
UNIT I FUNDAMENTALS OF PRODUCT DEVELOPMENT 9
Global Trends Analysis and Product decision - Social Trends - Technical Trends-
Economical Trends - Environmental Trends - Political/Policy Trends - Introduction to
Product Development Methodologies and Management - Overview of Products and
Services - Types of Product Development - Overview of Product Development methodologies
- Product Life Cycle – Product Development Planning and Management.

94
UNIT II REQUIREMENTS AND SYSTEM DESIGN 9
Requirement Engineering - Types of Requirements - Requirement Engineering -
traceability Matrix and Analysis - Requirement Management - System Design & Modeling -
Introduction to System Modeling - System Optimization - System Specification - Sub-System
Design - Interface Design.
UNIT III DESIGN AND TESTING 9
Conceptualization - Industrial Design and User Interface Design - Introduction to Concept
generation Techniques – Challenges in Integration of Engineering Disciplines - Concept
Screening & Evaluation - Detailed Design - Component Design and Verification –
Mechanical, Electronics and Software Subsystems - High Level Design/Low Level Design
of S/W Program - Types of Prototypes, S/W Testing- Hardware Schematic, Component
design, Layout and Hardware Testing – Prototyping - Introduction to Rapid Prototyping and
Rapid Manufacturing - System Integration, Testing, Certification and Documentation

UNIT IV SUSTENANCE ENGINEERING AND END-OF-LIFE (EOL) SUPPORT 9

Introduction to Product verification processes and stages - Introduction to Product Validation
processes and stages - Product Testing Standards and Certification - Product Documentation
- Sustenance -Maintenance and Repair – Enhancements - Product EoL - Obsolescence
Management – Configuration Management - EoL Disposal

UNIT V BUSINESS DYNAMICS – ENGINEERING SERVICES INDUSTRY 9

The Industry - Engineering Services Industry - Product Development in Industry versus
Academia –The IPD Essentials - Introduction to Vertical Specific Product Development
processes -Manufacturing/Purchase and Assembly of Systems - Integration of Mechanical,
Embedded and Software Systems – Product Development Trade-offs - Intellectual Property
Rights and Confidentiality – Security and Configuration Management.

TOTAL: 45 PERIODS
OUTCOMES:
Upon completion of the course, the students will be able to:
 Define, formulate and analyze a problem
 Solve specific problems independently or as part of a team
 Gain knowledge of the Innovation & Product Development process in the Business
Context
 Work independently as well as in teams
 Manage a project from start to finish

TEXTBOOKS:
1. Book specially prepared by NASSCOM as per the MoU.
2. Karl T Ulrich and Stephen D Eppinger, "Product Design and Development", Tata McGraw
Hill, Fifth Edition, 2011.
3. John W Newstorm and Keith Davis, "Organizational Behavior", Tata McGraw Hill,
Eleventh Edition, 2005.

REFERENCES:
1. Hiriyappa B, “Corporate Strategy – Managing the Business”, Author House, 2013.
2. Peter F Drucker, “People and Performance”, Butterworth – Heinemann [Elsevier], Oxford,
2004.
3. Vinod Kumar Garg and Venkita Krishnan N K, “Enterprise Resource Planning –
Concepts”, Second Edition, Prentice Hall, 2003.
4. Mark S Sanders and Ernest J McCormick, "Human Factors in Engineering and Design",
McGraw Hill Education, Seventh Edition, 2013

95