3/6/2017 AUDIO / VIDEO: AUDIO AND VISUAL SYSTEM: Switch Lights of Remote Touch do not Illuminate; 2014  2016 MY IS200T IS250 IS300 IS350 [04/2013   …
Last Modified: 03032017                       6.7:8.0.40                 Doc ID: RM100000000609U
   Model Year Start: 2014                          Model: IS200T              Prod Date Range: [04/2013            ]
   Title: AUDIO / VIDEO: AUDIO AND VISUAL SYSTEM: Switch Lights of Remote Touch do not Illuminate; 2014  2016
   MY IS200T IS250 IS300 IS350 [04/2013         ]
   Switch Lights of Remote Touch do not Illuminate
  DESCRIPTION
  Power is supplied to the remote operation board illumination when the light control switch is in the tail or head
  position.
     HINT:
         Only the "AUDIO", "MENU" and return switches on the remote operation board illuminate.
  WIRING DIAGRAM
  CAUTION / NOTICE / HINT
     NOTICE:
         Inspect the fuses for circuits related to this system before performing the following procedure.
  PROCEDURE
https://techinfo.toyota.com/t3Portal/resources/jsp/siviewer/index.jsp?dir=rm/RM30G0U&locale=en&User=false&publicationNumber=RM30G0U&objType=toc/…   1/3
3/6/2017 AUDIO / VIDEO: AUDIO AND VISUAL SYSTEM: Switch Lights of Remote Touch do not Illuminate; 2014  2016 MY IS200T IS250 IS300 IS350 [04/2013   …
      1.      CHECK HARNESS AND CONNECTOR (ILLUMINATION SIGNAL)
  (a) Disconnect the K78 remote operation board connector.
  (b) Measure the voltage according to the value(s) in the table below.
           Standard Voltage:
            TESTER CONNECTION                                         CONDITION                                  SPECIFIED CONDITION
       K781 (ILL+)  Body ground                   Light control switch in tail or head position                        11 to 14 V
                                                              NG        REPAIR OR REPLACE HARNESS OR CONNECTOR
  OK
              CHECK HARNESS AND CONNECTOR (REMOTE OPERATION BOARD  COMBINATION METER
      2.
              ASSEMBLY)
  (a) Disconnect the K78 remote operation board connector.
  (b) Disconnect the K3 combination meter assembly connector.
  (c) Measure the resistance according to the value(s) in the table below.
           Standard Resistance:
                    TESTER CONNECTION                                  CONDITION                         SPECIFIED CONDITION
                 K788 (ILL)  K339 (ILL)                              Always                                 Below 1 Ω
                 K788 (ILL)  Body ground                               Always                             10 kΩ or higher
                                                              NG        REPAIR OR REPLACE HARNESS OR CONNECTOR
  OK
      3.      REPLACE REMOTE OPERATION BOARD
  (a) Replace the remote operation board.
  Click here 
  (b) Check if the switch illumination turns on.
https://techinfo.toyota.com/t3Portal/resources/jsp/siviewer/index.jsp?dir=rm/RM30G0U&locale=en&User=false&publicationNumber=RM30G0U&objType=toc/…   2/3
3/6/2017 AUDIO / VIDEO: AUDIO AND VISUAL SYSTEM: Switch Lights of Remote Touch do not Illuminate; 2014  2016 MY IS200T IS250 IS300 IS350 [04/2013   …
         OK:
         The switch illumination turns on when the light control switch is in the tail or head position.
                                                              OK        END
                                                              NG        GO TO METER / GAUGE SYSTEM
https://techinfo.toyota.com/t3Portal/resources/jsp/siviewer/index.jsp?dir=rm/RM30G0U&locale=en&User=false&publicationNumber=RM30G0U&objType=toc/…   3/3