Environmentally Safe VCI/MCI ® Technologies

Productivity, How Cortec ® VpCI ™ pre-

investment protection vents corrosion and pro-
and cost reduction. tects your product.
The total economic loss from corrosion in For edge treatment VpCI™ is applied in just seconds to
a metal producing plant can approach a the edges of coils or stacks with conventional manual
staggering 5%. This or automated spray equipment. Traditional rust preven-
huge loss comes tives do not stop speckling on
from products that the internal
must be sold as metal layers.
a lower grade; or Humidity and
must be repickled, condensed mois-
reprocessed or ture easily penetrate VpCI- 337™

scrapped due to the coil forming a highly

corrosive attack corrosive environment
while in the plant, inside the coil. Rust,
leading to lost speckling and staining can
production capacity. develop in minutes under
The high cost of these conditions.VpCI™
corrosion also includes rust claims and freight vapor phase action migrates wherever
costs for returned goods. humidity and corrosive agents can penetrate to provide
complete corrosion protection. It protects external sur-
faces as well as internal layers of coils or sheets.

Cortec ® VpCI ™ products

How Cortec ® VpCIs
solve a wide variety
can cut costs.
of corrosion problems.
• Water-based VpCls are more economical than
VpCI™ protects a multitude of metal products. conventional oil-based rust preventives.
Spraying or dipping pipe and other tubulars with • Efficient application results in labor savings.
VpCI™ provides fast and • Improved health, safety and pollution control.
economical protection for • No need to remove VpCI™ protection, eliminating
exterior and interior extra processing steps.
surfaces. In addition, water-
based concentrates provide VpCI™ treatments virtually eliminate economic loss due
corrosion protection and to rust, speckling, staining and other forms of corrosion.
lubricant action for hot You can eliminate claims and returns while improving the
rolled, cold rolled, galvanized quality of your product. As a result, your processing will
and aluminized steels, become more streamlined, allowing for more efficient
copper, aluminum, brass operation.
Cost of VpCI™
and other products, Annual Treatment to Total Savings
Economic Loss Protect Total With Cortec
eliminating the need for Due to Corrosion Production VpCI™
oil and oil-water emulsion rust preventives. Our
Per Shift $ 4,500 $ 100 $ 4,400
technically trained staff can help you decide which Per Day 13,500 300 13,200
product you need for long lasting and complete Per Week 94,500 2,100 92,400
protection of your corrosion sensitive products. Per Month 410,625 9,125 401,500
Per Year $ 4,927,500 $ 109,500 $ 4,818,000
F igures are based on a steel mill producing and shipping 100 ten ton coils per shift,
three shifts per day, seven days per week, a nominal material and manufacturing
cost of $300 per ton, with a 1.5% economic loss due to corrosive attack.
 VpCI-345
Water-Based A clear synthetic coolant for metalworking jobs.
Characteristics:
Concentrates and • Synthetic metalworking fluid.
• Suitable for CNC machines.
Ready-to-Use • Contains no burning vapors.
• Passes through a 1 micron filter.
• Excellent for grinding and tumblers.
Metalworking Liquids VpCI-347
Multifunctional emulsion used as a heavy-duty
VpCI-316 lubricant/coolant for metal stampings, tubular
Metalworking liquids for protection of copper, products and machined parts.
brass and aluminum alloys. Characteristics:
Characteristics: • Low odor.
• Protects copper, bronze and brass. • Contains no burning vapors.
• Leaves a light semi-dry film for stamping • Provides multimetal protection.
or rolling (depends on concentration used). • EP Properties.
• Biodegradable, zero VOC. • Excellent protection in sheltered outdoor conditions.
VpCI-337™ VpCI-377™
Temporary coating and fogging agent for indoor Can be used in a multitude of operations from
storage and packaging uses. Available in EcoAir™ a temporary coating to use as a coolant in light
brand sizes, 13 oz. (369 g) bottles. to medium metalworking jobs for ferrous metals.
Characteristics: Available in EcoAir® brand sizes, 12 oz. (340 g) bottles.
• Leaves a thin, non-tacky film. Characteristics:
• Ideal for edge protection of coils and stacks. • Forms a clear, dry film which can be painted over.
• Can be fogged or misted into containers, cavities, • Biodegradable.
pipes, etc. • Free of phosphate, nitrite, nitrate, chlorine, borates
• Provides multimetal protection. and sulfur.
• Excellent vapor phase protection. • Excellent hard water stability.
• Passes cast iron chip test @ 2%.
VpCI-338™ (Formerly VpCI-337FW™) • Effective at low concentrations.
An emulsion made from FDA approved compounds to • Multimetal protection.
clean and protect tin plate, galvanized and cold rolled
steel, aluminum and stainless steel. Primarily used for VpCI-378™
intermediate food processing operations. Performs well An emulsion designed as a complete
as a cleaner and gives protection to coiled stock as replacement for oil rust preventives.
represented in a wet stack test. Characteristics:
Characteristics: • Ideal for ferrous metals.
• Excellent vapor phase protection. • Excellent salt and humidity results.
• Excellent wet stack protection. • Slightly tacky film.
• Mild cleaner. • Easily removed with an
• Can be disposed of easily. alkaline cleaner.
• Easily removed. • Readily soluble in water.
• Multimetal protection. • Provides indoor and
outdoor protection.
VpCI-344™ • Stable at higher temperatures for
Corrosion preventive liquid for wet tempering dipping baths.
of galvanized and cold-rolled steel.
Characteristics: VpCI-379™
• New generation wet tempering solution. Temporary film for storage
• Biodegradable. and shipping protection of
• Free of phosphate, nitrate, nitrite, chlorine and sulfur. multimetal parts.
• Ideal for ferrous metals and galvanized steel. Characteristics:
• Film persistency in turbulent, high temperature • Forms a dry film.
and high sheer conditions. • Excellent humidity results.
• Easy disposal, handling and shipping. • Easily removed with an
• Excellent solubility in water. alkaline cleaner.
• Passes cast iron chip test @ 2%. • Provides indoor and
• Excellent hard water stability. packaging protection.
• Provides extended protection against • Hydrotesting.
corrosion, white rust and staining.
 VpCI-325™
Oil-Based A broad range corrosion inhibitor effective on ferrous
metals, zinc, aluminum, galvanized steel, copper, cad-
Ready-to-Use mium, babbitt, brass, silver and many alloys.
Characteristics:
Liquids and • Excellent salt spray results.
• Quick draining thin film.
Concentrates • Low viscosity.
• Penetrates tight tolerances.
VpCI-322™ • Environmentally friendly.
Provides superior protection in open • Vegetable oil carrier.
atmosphere conditions. VpCI-326™
Characteristics: Corrosion inhibiting additive for machining lubricants
• Provides multimetal protection especially on zinc, and hydraulic fluids. Multimetal protection.
aluminum, magnesium and the yellow metals. Characteristics:
• Excellent salt spray protection. • Low viscosity.
• Filters through a 5 micron filter. • Excellent indoor protection.
• Forms a thin film. • Very good humidity results.
• Dilutable. • Filters through a 1 micron filter.
• Low viscosity. • Forms a thin film.
• High temperature resistance. • Excellent vapor phase protection.
• Additive for hydraulic oil. • Additive for hydraulic oil.
VpCI-324™ VpCI-327™
Light sanitary lubricant, penetrating oil or anti- Solvent-blended concentrate. Good for magnesium,
corrosion film for equipment and machine parts aluminum and ferrous metals.
where there is exposure of the lubricated parts to
edible products. Penetrates quickly to free rusted Characteristics:
or corroded fasteners. VpCI-324™ is authorized by • Quick penetration.
the USDA for use in category H-1. Also contains a • Low viscosity.
bacteriostatic preservative that retards the grown of • Forms a thin film.
bacteria which often breeds in conventional lubri- • Excellent humidity and salt spray results.
cants found in food and beverage processing plants. VpCI-329™,VpCI-329D™ and VpCI-329F™
Available in EcoAir™ brand sizes, 10 oz. (284 g) bottles. Add VpCI-329™ concentrate to oils to enhance cor-
Characteristics: rosion inhibiting characteristics. VpCI-329D™ is the
• USDA H-1 rating for use in federal inspected meat and ready-to-use version, and requires no blending. VpCI-
poultry plants, as well as beverage and other 329F™ is the version approved by the United States
food processing facilities where incidental food Department of Agriculture for use on packaging
contact may occur. materials in direct contact with meat or poultry.
• Quickly frees corroded parts. Characteristics:
• Protects metal from corrosion. • Excellent protection in outdoor sheltered
conditions in coastal environments.
• Effective on multimetals.
• VpCI-329™ conforms to MIL-P-46002B.
• Forms a thin film.
VpCI-369™,VpCI-369D™ and VpCI-369M™
VpCI-369™ is a self-healing barrier coating providing
extended outdoor multimetal protection for up to
48 months. VpCI-369D™ is a diluted version which
provides months of outdoor protection. VpCI-369M™
is a ready-to-use version which meets MIL-C-16173E
Grade 2. This version also offers lower viscosity than
VpCI-369™ and lower solids content. (QPL product.)
Available in CorrShield™ brand sizes, 11 oz. (312 g)
aerosol cans.
Characteristics:
• Medium viscosity.
• Excellent salt spray results.
• Excellent outdoor/salt spray protection.
• Effective on multimetals.
• Dilutable.
• Excellent lubricant.
 EcoLine® Heavy Duty Grease
Soy-Based Soy-based grease for heavy industrial applications.
Intended to replace non-degradable NLGI grade 2
Ready-to-Use greases.
Characteristics:
Liquids and • Maintains viscosity over a wide temperature range.
• Excellent corrosion resistance in both industrial and
Concentrates marine environments.
• Performs well during operation and lay-up applications.
EcoLine® All Purpose Lubricant • Provides both contact and vapor phase corrosion
Soy-based lubricant that is designed for indus- protection.
trial applications. Contains a friction modifier and EcoLine® Long Term Rust Preventative
extreme pressure additive. Provides multimetal Soy-based rust preventative that provides temporary
protection. protection for up to 48 months.
Characteristics: Characteristics:
• Provides multimetal corrosion protection. • Provides multimetal corrosion protection.
• Leaves a thin film that remains oily. • Environmentally conscious replacement for petroleum
• Environmentally friendly, and biodegradable. based rust preventatives.
• Performs well as a mold release. • Performs very well in both high humidity and marine
EcoLine® Bearing, Chain and Roller Lube environments.
Soy-based, ready-to-use, high quality rust • VOC free.
preventative lubricant.
Characteristics:
• Excellent for operating and mothballed equipment.
• Excellent for conveyor and lubricating drive chains.
• Tackifiers resist sling-off from high speed chains.
• Meets USDA’s bio-based product definition for
EO 13101.
• Provides multimetal protection.
EcoLine® Cutting Fluid
Soy-based, multifunctional metalworking fluid for a
variety of machining operations.
Characteristics:
• Effective at a wide range of dilutions.
• Provides corrosion protection after operation.
• Superb lubricating properties for machining a wide
range of metals.
• Excellent humidity resistance.
• Provides multimetal protection for indoor storage
protection.
EcoLine® Food Machinery Grease
Soy-based grease for food machinery applications.
Formulated to meet USDA H-1 criteria for incidental
food contact.
Characteristics:
• High viscosity index at a wide range of temperatures.
• High flash and fire points reduce fire hazard.
• Provides both contact and vapor phase corrosion
protection.
• Environmentally safe, biodegradable formulation.
 Coating Sheltered Outdoor Removal Methods
Indoor Protection
Cortec Product Film Thickness Protection Metals Protected Solution Color
Film Type # of months Use Cortec 410 series cleaners
# of months

VpCI-344™ clear dry 0.25 mil/5 µm 6 3 Multimetal Water or alkaline cleaners Clear amber
Coolants & Lubricants
Water-Based Metalworking Liquids

VpCI-345™ clear dry 0.2 mil/0.5 µm 24 N.R. Multimetal Alkaline cleaners Clear orange

VpCI-347™ waxy 0.5 mil/12.5 µm 24 12 Multimetal Alkaline cleaners Tan/brown

VpCI-337™ clear dry 0.5 mil/12.5 µm 12 1-2 Multimetal Water or alkaline cleaners Cloudy dark yellow
Sprays
Edge

VpCI-338™ clear dry 0.5 mil/12.5 µm 12 1-2 Multimetal Alkaline cleaners Brownish off-white

VpCI-316™ clear dry 0.25 mil/5 µm 24 N.R. Brass, copper, bronze Water or alkaline cleaners Clear yellow

VpCI-377™ clear dry 0.25 mil/5 µm 24 6 Multimetal Water or alkaline cleaners Dark brown
General Purpose

light, wax
VpCI-378™ 0.25 mil/5 µm 24 6-12 Multimetal Water or alkaline cleaners Cloudy brown
like

VpCI-379™ clear dry 0.5 mil/12.5 µm 24 6 Multimetal Water or alkaline cleaners Clear orange/yellow

VpCI-324™ oily 0.5-1 mil/12.5-25 µm 12 N.R. Ferrous & tinplate Alkaline cleaners & mineral spirits Clear, colorless liquid
(contains solvents)
Penetrating Oils
Oil-Based Metalworking Liquids/Additives

VpCI-325™ oily 0.5 mil/12.5 µm 24 12 Multimetal Alkaline cleaners & mineral spirits Opaque tan

VpCI-327™ oily 0.5 mil/12.5 µm 24 12 Multimetal Alkaline cleaners & mineral spirits Clear yellow
Engine

VpCI-323™ oily 1 mil/25 µm 24 12 Multimetal Alkaline cleaners & mineral spirits Dark orange
Oil

VpCI-322™ oily 0.5 mil/12.5 µm 24 12 Multimetal Alkaline cleaners & mineral spirits Dark orange
Properties
Hydraulic

VpCI-326™ oily 0.5 mil/12.5 µm 24 12 Multimetal Alkaline cleaners & mineral spirits Clear yellow

VpCI-329™ oily 1 mil/25 µm 24 24 Multimetal Alkaline cleaners & mineral spirits Opaque tannish brown
General Purpose and Mothballing

VpCI-329D™ 1:9 oily 1 mil/25 µm 24 18 Multimetal Alkaline cleaners & mineral spirits Opaque tannish brown

VpCI-329F™ oily 1 mil/25 µm 24 24 Multimetal Alkaline cleaners & mineral spirits Clear yellow

VpCI-369™ oily 0.5-5 mil/12.5-125 µm 60 48 Multimetal Alkaline cleaners & mineral spirits Tan/brown

VpCI-369D™ oily 1-3 mil/25-75 µm 48 18 Multimetal Alkaline cleaners & mineral spirits Tan/brown

VpCI-369M™ oily 0.5-5 mil/12.5-125 µm 60 24 Multimetal Alkaline cleaners & mineral spirits Tan/brown

EcoLine® All
oily 1 mil/25 µm 12 3 Multimetal Alkaline cleaners Amber
Purpose Lube
Coolants &
Lubricants

EcoLine® Bearing,
oily 1 mil/25 µm 6 3 Multimetal Alkaline cleaners Amber
Chain Roller Lube
Soy-Based

Amber
EcoLine® Cutting Fluid clear dry >0.25 mil/5 µm 9 3 Multimetal Alkaline cleaners
Milky white (when mixed)
Purpose
General

EcoLine® Long Term

oily 1 mil/25 µm 24 12 Multimetal Alkaline cleaners Amber
Rust Preventative

EcoLine® Food
grease n/a 24 12 Multimetal Alkaline cleaners & mineral spirits Charcoal gray
Machinery Grease
Grease

EcoLine® Heavy
grease n/a 24 12 Multimetal Alkaline cleaners & mineral spirits Tan
Duty Grease
 Application Methods Needs Removal
Cortec Product All can be applied by Dilution Range Description Before:
spray or dip Welding Painting

Contains water-based corrosion inhibitors to protect steel during wet tempering operations. Contains a blend
2.5-20% in
VpCI-344™ Flood of corrosion inhibitors and lubricants to provide a range of slip, control and corrosion protection. Hard water N N
water
stable.

Semi-synthetic. Use as a coolant in machining applications. Resistant to bacterial attack. Good for carbon
2.5-20% in
VpCI-345™ Flood steel and galvanized steel. Ideally suited for milling, turning, polishing, drilling, boring, deburring, broaching N N
water
and other light-duty machining operations.

Ideally suited for heavy-duty cutting, milling, turning, drilling, boring, broaching, gear cutting, drawing and
2.5-20% in other machining operations. A liquid concentrate which forms an emulsion with water. A heavy-duty lubricant
VpCI-347™ Flood N Y
water for difficult-to-produce metal stampings and machined parts. Protects steel, galvanized 304, 316 stainless
steel and copper. Does not promote, and is resistant to, bacterial attack.

Good as an edge spray for coiled stock, parts finishing, and fogging. Apply before shipping or for medium-
VpCI-337™ Fog Ready to use Y Y
term storage. Spray on wood pallets and stacked sheet metal.

VpCI-338™ Fog Ready to use A water-based emulsion made from FDA certified compounds. Y Y

2.5-20% in
VpCI-316™ Tumble A sheltered exposure temporary coating designed for stamping, burnishing, grinding, rolling and tumblers. N Y
water

Use for castings, machined parts, polished metal, ground metal or hydrotesting as a temporary coating and/
2.5-50% in
VpCI-377™ Brush, flood or coolant additive to parts washers. Excellent stability in hard water (passes ASTM D4637 iron chip test @ N N
water
2%). Excellent humidity. Designed for protecting ferrous metals in sheltered areas, indoors or in packaging.

Designed to protect ferrous and non-ferrous metals in sheltered areas, indoors or in packages. Not for direct
exposure to rain and outdoor elements. Leaves a light tacky film. Provides good salt spray protection. Use as
VpCI-378™ Brush, flood 5-50% in water a quenching fluid or in dipping applications operating at elevated temperatures. Designed to protect castings, N Y
forgings, tubular parts, machined and honed metal components in difficult shipping scenarios, i.e., Pacific
Rim.

Use for castings, forgings, tubular parts, machined and honed metal components. Additive to parts washers
10-50% in
VpCI-379™ Brush, flood and rinse water systems, as well as some types of tumblers. Does not need removal prior to painting. There N N
water
is no cross-contamination in post water or oil operations. Mildly foaming.
Light sanitary lubricant, penetrating oil or anti-corrosion film for equipment and machine parts where there is
exposure of the lubricated parts to edible products. Penetrates quickly to free rusted or corroded fasteners.
VpCI-324™ Dip, brush Ready to use VpCI-324™ is authorized by the USDA for use in category H-1. Also contains a bacteriostatic preservative Y Y
that retards the growth of bacteria which often breeds in conventional lubricants found in food and beverage
processing plants.

Low viscosity containing oil for quick draining and excellent surface coverage. Provides excellent protection
in humidity and salt fog. Safe to use with most gaskets and sealants. Good for long-term sheltered storage of
VpCI-325™ Fog Ready to use Y Y
parts (esp. cast iron), finishing, lay-up, and fog tanks. Apply by spraying or dipping. Also penetrates. Available
in bulk and MRO forms.

Low viscosity oil with a solvent added for quick penetration and good coverage. Provides good humidity pro-
VpCI-327™ Fog Ready to use Y Y
tection for ferrous metals. Good for parts, finishing and fogging of spaces.

Oil additive for internal moving parts of a working engine. Contains no heavy metals. Passes through a 1µm
VpCI-323™ Add 5-20% in oil Y Y
filter.

Light viscosity for protecting metals. Provides good protection in humid conditions. Designed for lubricating,
VpCI-322™ Add 5-20% in oil Y Y
hydraulic systems parts finishing, machining, fluid lay-up or as an oil additive.

For lubricating and hydraulic systems, parts finishing, machining, lay-up fluids, and mothballing. Passes
VpCI-326™ Fog, add 5-20% in oil Y Y
through a 1 micron filter.

Light to medium viscosity oil for protecting ferrous metals against salt fog and humidity. Protects in a shel-
VpCI-329™ Fog, add 5-20% in oil Y Y
tered outdoor environment. Good for fogging, fluid lay-up, and dipping.

VpCI-329D™ 1:9 Fog Ready to use Pre-diluted version of VpCI-329™. Y Y

VpCI-329F™ Fog, add 5-20% in oil FDA approved version of VpCI-329™. Y Y

VpCI-369™ Brush 5-20% in oil Multimetal protective coating for outdoor storage of metals in concentrated form. N Y

VpCI-369D™ Brush Ready to use Pre-diluted version of VpCI-369™. N Y

VpCI-369M™ Brush Ready to use Meets MIL-C-16173D N Y

EcoLine® All For general purpose lubricating applications. Excellent for equipment or machinery requiring lubricity and cor-
Roll, brush, flood Ready to use Y Y
Purpose Lube rosion protection.

EcoLine® Bearing,
Roll, brush, flood Ready to use For direct replacement of petroleum derived bearing, chain and roller lubes. Y Y
Chain Roller Lube
2.5-50% in Excellent for cutting, drilling, splitting and drawing applications. Direct replacement for soluble oil type fluids
EcoLine® Cutting Fluid Roll, brush, flood Y Y
water that provides superior lubricity and excellent corrosion protection.

EcoLine® Long Term Low viscosity rust preventative that is safe for the environment. Provides excellent multimetal corrosion
Roll, brush, flood Ready to use Y Y
Rust Preventative protection.

EcoLiner Food Direct replacement for NLGI 2 grade petroleum derived grease. Provides excellent lubricity, even in extreme
Ready to use Y Y
Machinery Grease conditions.

EcoLine® Heavy
Ready to use USDA H-1 version of EcoLine Heavy Duty Grease. Y Y
Duty Grease
 Packaging
All Cortec metalworking fluids are available in 5 gal (19 liter) pails, 55 gal (208 liter) drums, totes and bulk.VpCI-324,VpCI-377 and
VpCI-337™ are also available in EcoAir® compressed air bottles. EcoLine® products also available in 16 fl. oz. bottles (cases of 12)

Total Corrosion Control™

Cortec Corporation® is dedicated to controlling corrosion at ALL STAGES of a product life cycle. Cortec has developed a diverse
range of corrosion protection products including cleaners, metalworking fluids, water and oil-based coatings and corrosion
inhibitors, rust removers, paint strippers, powders, packaging foams, paper, films, surface treatments and admixtures for concrete.
Contact Cortec for additional brochures and information.

LIMITED WARRANTY
All statements, technical information and recommendations contained herein are based on tests Cortec BEFORE USING, USER SHALL DETERMINE THE SUITABILITY OF THE PRODUCT FOR ITS INTENDED
Corporation believes to be reliable, but the accuracy or completeness thereof is not guaranteed. USE, AND USER ASSUMES ALL RISK AND LIABILITY WHAT­SOEVER IN CONNECTION THEREWITH.
No representation or recommendation not contained herein shall have any force or effect unless in a written
Cortec Corporation warrants Cortec® products will be free from defects when shipped to
document signed by an officer of Cortec Corporation.
customer. Cortec Corporation’s obligation under this warranty shall be limited to replacement of
product that proves to be defective. To obtain replacement product under this warranty,
THE FOREGOING WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES, EXPRESS,
the customer must notify Cortec Corporation of the claimed defect within six months after shipment
IMPLIED OR STATUTORY, INCLUDING WITHOUT LIMITATION ANY IMPLIED WARRANTY OF
of product to customer. All freight charges for replacement product shall be paid by customer.
MERCHANTABILITY OR OF FITNESS FOR A PARTICULAR PURPOSE. IN NO CASE SHALL CORTEC
Cortec Corporation shall have no liability for any injury, loss or damage arising out of the use of or the CORPORATION BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES.
inability to use the products.

Distributed by:

4119 White Bear Parkway, St. Paul, MN 55110 USA

Phone (651) 429-1100, Fax (651) 429-1122
Toll Free (800) 4-CORTEC, E-mail Info@CortecVCI.com
Internet http://www.CortecVCI.com
Revised: 06/06 Supersedes: 11/03.
Cortec®, VpCI™, VpCI™ Film Color of Blue®, VpCI-126®, VpCI-609®, VpCI-137®, VmCI-307®, Migrating Corrosion Inhibitors™, MCI®, MCI
Grenade®, EcoWorks®, Eco Works®, EcoAir®, Eco-Corr®, Eco-Corr Film®, EcoLine®, EcoClean®, EcoShield®, EcoWeave®, EcoSpray®,
EcoCoat®, Eco Emitter™, EcoSol™, Eco-Tie™, Eco-Card™, Eco-Shrink™, EcoWrap™, Eco Film™, Cor-Mitt®, Cor-Pak®, CorShield®,
Corrosorbers®, CorWipe®, CorrVerter®, Corr Seal®, CorrLam™, Corr-Fill™, Corrlube™, ElectriCorr®, MilCorr®, GalvaCorr®, Super Corr®,
HPRS®, Boiler Lizard®, Cooling Tower Frog®, Closed Loop Toad®, Cooling Loop Gator®, Pine Tree Logo®, CRI®, Metacor™, and Rust Hunter™
are trademarks of Cortec® Corporation.
©Cortec Corporation 2006. All rights reserved. Printed on recycled paper 100% Post Consumer