Scribd
Upload
66 views7 pages

Lab 7 Floors, Ceilings and Roof Floors: Ceiling

This document provides instructions for creating floors, ceilings, roofs, stairs, and schedules in AutoCAD. It describes how to use pick lines and walls to place floors on level 1, and how to draw ceilings and roofs using closed loops so no lines intersect. Stairs are drawn to connect the roof level using shaft options. Scheduling involves creating schedules for doors, windows, and rooms by selecting parameters like type, width, and area. Views are placed on sheets by selecting a sheet size and desired views.

Uploaded by

Samrah Shazmeen
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
66 views7 pages

Lab 7 Floors, Ceilings and Roof Floors: Ceiling

This document provides instructions for creating floors, ceilings, roofs, stairs, and schedules in AutoCAD. It describes how to use pick lines and walls to place floors on level 1, and how to draw ceilings and roofs using closed loops so no lines intersect. Stairs are drawn to connect the roof level using shaft options. Scheduling involves creating schedules for doors, windows, and rooms by selecting parameters like type, width, and area. Views are placed on sheets by selecting a sheet size and desired views.

Uploaded by

Samrah Shazmeen
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 7

LAB 7 FLOORS, CEILINGS AND ROOF FLOORS

• Go to the Architecture tab


• Select Architectural floor option from architecture tab
• There are various options to mark floor in the level 1
➢ Pick lines
➢ Rectangle
➢ Pick walls
• I choose pick wall option
• Make sure that no line intersects each other
• Floor has been placed

CEILING
• Go to the architecture tab
• Select ceiling option
• Choose sketch ceiling
• Draw the ceiling with the help of pick lines
• Make sure no line intersects and must be in a closed loop
• Ceiling has been placed

ROOF
• Go to the architecture tab
• Select roof option
• There is various option to make roof
• I choose flat roof
• For that select roof option and uncheck the Slope option
• Place the generic roof (8”) with the help of pick lines
• Make sure no line intersects and must be in a closed loop
• Roof has been placed
FIGURE 1 Ariel view of roof, ceiling
LAB 8 STAIRS
• Go to the Architecture tab
• Select stairs
• Specify the riser
• Draw the stairs
• Make sure it reaches to the height of roof level

Figure 2 isolate view of stair

• Go to the shaft option and give opening to connect roof level

Figure 3 complete 3d view of the project

Figure 4 bottom view of 3d model


LAB 9 SCHEDULING AND VIEWS SCHEDULING
• For scheduling go to the view tab
• Select scheduling/ quantities option
• New schedule screen appears
• Select the parameters to make the schedules I choose
➢ Door
➢ Windows
➢ Rooms
DOORS
• Insert the parameters ➢ Types
➢ Width
➢ Height
➢ Sill height
➢ Thickness
• Schedule appears

FIGURE 5 door schedule


WINDOWS
• Insert the parameters
➢ Width height
➢ Sill height
➢ Height
➢ Type
➢ Head height
• Windows schedule appears

FIGURE 6 window schedule

ROOMS
• Go to the architecture tab select tag room
• And bound them with the tags and name the rooms
Figure 7 Rooms tags

• Insert the parameters for the scheduling of rooms


➢ Area
➢ Room name
➢ Count

FIGURE 8 Rooms Schedule


VIEWS
• Select new sheet option on the project view
• Select the size of the sheet
• Select the place view option
• View Screen appears
• Select the view
• Place it into the sheet

FIGURE 9 Architectural sheet

FIGURE 10 Foundation Sheet

You might also like