FUJIFILM FCR CAPSULA XLII Specifications
Standard Components: Number of Stacker: 1
• FCR CAPSULA XLII Image Reader Unit (Model: CR-IR 359)
Reading Gray Scale: 12 bits
• AC power cord
Network: 10 Base T /100 Base TX
Other System Components:
• Optional upgrade kit for 50-micron reading with HR-V Dimensions (W ✕ D ✕ H): 590 ✕ 380 ✕ 810 mm (23” ✕ 15” ✕ 32”)
• IP cassette type CC, LC, CH
• CR Console
Unit: mm (in.)
• Dry Imager: DRYPIX 2000, 4000, 7000
380 (15) 590 (23)
Supplies:
Imaging Plate:
• ST-VI: 35 ✕ 43 cm (14” ✕ 17”), 35 ✕ 35 cm (14” ✕ 14”), 10” ✕ 12”, 8” ✕ 10”,
24 ✕ 30 cm, 18 ✕ 24 cm, 15 ✕ 30 cm
• HR-V: 24 ✕ 30 cm*, 18 ✕ 24 cm**
IP Cassette:
• Type CC: 35 ✕ 43 cm (14” ✕ 17”), 35 ✕ 35 cm (14” ✕ 14”), 10” ✕ 12”, 8” ✕ 10”,
24 ✕ 30 cm, 18 ✕ 24 cm, 15 ✕ 30 cm
810 (32)
• Type LC: 35.4 ✕ 124.5 cm, 35.4 ✕ 101.7 cm, 35.4 ✕ 83.7 cm, 25.2 ✕ 58 cm,
24 ✕ 57 cm
• Type CH: 24 ✕ 30 cm*, 18 ✕ 24 cm** (For 50-micron reading with HR-V)
Time Required for IP Feed /Load:
FUJI COMPUTED RADIOGRAPHY
IP Type Required Time
ST-VI 35 ✕ 43 cm (14” ✕ 17”) Approx. 58 (41) sec.
ST-VI 35 ✕ 35 cm (14” ✕ 14”) Approx. 52 (38) sec.
ST-VI 10” ✕ 12” Approx. 49 sec. FUJIFILM introduces a compact, all-in-one FCR with extremely clear
ST-VI 8” ✕ 10” Approx. 41 sec.
ST-VI 24 ✕ 30 cm Approx. 48 sec. and optimal imaging based upon FUJIFILM’s extensive experience.
ST-VI 18 ✕ 24 cm Approx. 39 sec. Weight: 99 kg (218 lbs.)
ST-VI 15 ✕ 30 cm Approx. 49 sec. Power Supply Conditions:
HR-V 24 ✕ 30 cm* Approx. 59 sec. Single phase 50-60Hz
HR-V 18 ✕ 24 cm** Approx. 51 sec. 120-240V ±10%
• Under “Required Time” in the table above, figures in parentheses are at high-speed mode. 5A (max)
• Image erase time on IP is directly related to the exposure made. It is assumed to be at 25mR for ST-VI and
Environmental Conditions:
600 mR for HR-V.
• The performance described above shows typical values. It varies depending on the exposure level.
• Operating Conditions:
Temperature: 15-30°C
Processing Capacity Humidity: 40-80%RH (No dew condensation)
IP Type Processing Capacity
• Non-operating Conditions:
Temperature: 0-45°C
ST-VI 35 ✕ 43 cm (14” ✕ 17”) Approx. 62 (87) IPs/hr. Humidity: 10-90%RH (No dew condensation)
ST-VI 35 ✕ 35 cm (14” ✕ 14”) Approx. 70 (94) IPs/hr.
ST-VI 10” ✕ 12” Approx. 73 IPs/hr.
ST-VI 8” ✕ 10” Approx. 87 IPs/hr. IP Cassette
ST-VI 24 ✕ 30 cm Approx. 75 IPs/hr.
ST-VI 18 ✕ 24 cm Approx. 92 IPs/hr.
ST-VI 15 ✕ 30 cm Approx. 73 IPs/hr. Type CC
HR-V 24 ✕ 30 cm* Approx. 61 IPs/hr.
HR-V 18 ✕ 24 cm** Approx. 70 IPs/hr.
• Figures in parentheses and conditions are the same as those of “Time Required for IP Feed/Load”.
• The time required to change the cassette is assumed to be 0 (zero) seconds.
Time to Display on CR Console:
• Approx. 42 sec. in case of 35 ✕ 43 cm (ST-VI) with 100-micron reading
• Approx. 32 sec. in case of 18 ✕ 24 cm (HR-V)** with 50-micron reading
Time to Print on DRYPIX 4000 through network via CR Console:
• Approx. 145 sec. in case of 35 ✕ 43 cm (ST-VI) with 100-micron reading
• Approx. 140 sec. in case of 18 ✕ 24 cm (HR-V)** with 50-micron reading
24 ✕ 30 cm cassette mounted with
Reading Specification Type CH the cassette adapter
Reading Specification
Inches Metric Standard Pixel-density High Pixel-density
High-speed mode Standard mode
14” ✕ 17” (ST-VI) 35 ✕ 43 cm (ST-VI) 5 pixels/mm 10 pixels/mm
14” ✕ 14” (ST-VI) 35 ✕ 35 cm (ST-VI) 5 pixels/mm 10 pixels/mm
10” ✕ 12” (ST-VI) 24 ✕ 30 cm (ST-VI) – 10 pixels/mm
8” ✕ 10” (ST-VI) 18 ✕ 24 cm (ST-VI) – 10 pixels/mm
– 15 ✕ 30 cm (ST-VI) – 10 pixels/mm
– 24 ✕ 30 cm (HR-V)* – 20 pixels/mm
– 18 ✕ 24 cm (HR-V)** – 20 pixels/mm
*Requires the optional upgrade kit and the cassette adaptor.
**Requires the optional upgrade kit.
Specifications and PC requirements are subject to change without notice.
All brand names or trademarks are the property of their respective owners.
Ref. No. XB-870E (SK·09·02·F1120·F9711) Printed in Japan ©2007 FUJIFILM Corporation
Worldwide, extensive experience results in Image Display and Processing – CR Console
confidence for FCR The multi-function console handles all
In 1981, FUJIFILM became the world first manufacuturer to successfully complex procedures of digital X-ray
digitize X-ray images with FUJIFILM Computed Radiography (FCR). imaging – patient ID, image reviewing,
This made it possible to effectively handle diagnostic images in a digital processing and printing, DICOM interface,
format that constantly provided highly precise, stable images. FUJIFILM and more – as well as quality assurance
has leading installation experience worldwide resulting in confidence to functions all within a single workstation.
satisfy all users.
Compact Frame and Vertical cassette insertion for Featuring Image Intelligence™ Processing
Effective Work Space Image Intelligence™ is an integrated set of
FCR CAPSULA XLII is image-processing technologies that comes
designed for insertion of the from the accumulation of over 70 years of
IP cassette at an angle to imaging expertise. The company has
ensure effective layout of the constantly delivered innovative technology and high quality images, as
equipment in a working area can be seen with FNC (Flexible Noise Control) that maximally
that tends to be confined. suppresses noise while leaving all effective image information intact.
As a result, this model
requires less installation
space compared with
previous horizontal-insertion Noise
models, and therefore, offers Previous model (XG-1) CAPSULA XLII component
more installation flexibility. suppression
Compact with High Efficiency
FCR CAPSULA XLII enables extremely high throughput of up to
approximately 94 IPs/hr.* and the time to display the image on the CR Mammography applications*** (Optional)
Console monitor is approximately 23 sec., in spite of its compactness. FCR CAPSULA XLII equipped with
* at 35 ✕ 35 cm size on high-speed mode
the optional capability of 50-micron
reading with the HR-V and the IP
cassette type CH can visualize more
All-in-one unit for all diagnostic imaging needs fine and minute structures. It is suited
for mammography applications in
Three types of IP cassettes (Type CC, LC and
addition to extremities and others.
CH**) can cover various imaging such as chest,
lumbar spine, pantomography (15 ✕ 30cm), and
extremities. Virtually all imaging requirements *** In the U.S. and Canada the unit cannot be applicable to mammography. In other
countries, the locally applicable regulations and/or guidelines should be followed.
can be satisfied with the single unit.
** The optional 50-micron reading kit with HR-V necessary
Example of System Layout
Introducing a newly upgraded FCR CAPSULA XLII designed with
Easy Operations monitored on Screen
a new form and equipped with state-of-the-art functions including an optional
Capable of automatically starting the IP reading and image processing
capability of 50-micron reading with high resolution imaging plates (HR-V). when the IP cassette is inserted, the system is designed to complete
the IP reading cycle with simple operations. Setting parameters can be
changed with the buttons on the monitor screen. The screen can also
One of the FCR key components is an Imaging Plate, or IP, that is used in place of X-ray film to easily display the status and the time remaining to complete the IP reading
digitize X-ray images. The FCR CAPSULA XLII features the IP in an unprecedented compact frame, process for user-convenience.
as it incorporates 70 years of FUJIFILM’s extensive technology and know-how. CAPSULA, meaning
small box in Latin, has been cleverly trimmed to be smaller and lighter, boosting flexibility on CR Console
installation and layout, while maintaining the specifications for a broad range of diagnostic imaging
needs from general radiography to pantomography. Plus, the optional capability of 50-micron FCR CAPSULA XLII
reading with the HR-V can be utilized to visualize finer and minute structures for better diagnosis.
Utility Image Reading Mode
FUJIFILM FCR CAPSULA XLII Specifications
Standard Components: Number of Stacker: 1
• FCR CAPSULA XLII Image Reader Unit (Model: CR-IR 359)
Reading Gray Scale: 12 bits
• AC power cord
Network: 10 Base T /100 Base TX
Other System Components:
• Optional upgrade kit for 50-micron reading with HR-V Dimensions (W ✕ D ✕ H): 590 ✕ 380 ✕ 810 mm (23” ✕ 15” ✕ 32”)
• IP cassette type CC, LC, CH
• CR Console
Unit: mm (in.)
• Dry Imager: DRYPIX 2000, 4000, 7000
380 (15) 590 (23)
Supplies:
Imaging Plate:
• ST-VI: 35 ✕ 43 cm (14” ✕ 17”), 35 ✕ 35 cm (14” ✕ 14”), 10” ✕ 12”, 8” ✕ 10”,
24 ✕ 30 cm, 18 ✕ 24 cm, 15 ✕ 30 cm
• HR-V: 24 ✕ 30 cm*, 18 ✕ 24 cm**
IP Cassette:
• Type CC: 35 ✕ 43 cm (14” ✕ 17”), 35 ✕ 35 cm (14” ✕ 14”), 10” ✕ 12”, 8” ✕ 10”,
24 ✕ 30 cm, 18 ✕ 24 cm, 15 ✕ 30 cm
810 (32)
• Type LC: 35.4 ✕ 124.5 cm, 35.4 ✕ 101.7 cm, 35.4 ✕ 83.7 cm, 25.2 ✕ 58 cm,
24 ✕ 57 cm
• Type CH: 24 ✕ 30 cm*, 18 ✕ 24 cm** (For 50-micron reading with HR-V)
Time Required for IP Feed /Load:
FUJI COMPUTED RADIOGRAPHY
IP Type Required Time
ST-VI 35 ✕ 43 cm (14” ✕ 17”) Approx. 58 (41) sec.
ST-VI 35 ✕ 35 cm (14” ✕ 14”) Approx. 52 (38) sec.
ST-VI 10” ✕ 12” Approx. 49 sec. FUJIFILM introduces a compact, all-in-one FCR with extremely clear
ST-VI 8” ✕ 10” Approx. 41 sec.
ST-VI 24 ✕ 30 cm Approx. 48 sec. and optimal imaging based upon FUJIFILM’s extensive experience.
ST-VI 18 ✕ 24 cm Approx. 39 sec. Weight: 99 kg (218 lbs.)
ST-VI 15 ✕ 30 cm Approx. 49 sec. Power Supply Conditions:
HR-V 24 ✕ 30 cm* Approx. 59 sec. Single phase 50-60Hz
HR-V 18 ✕ 24 cm** Approx. 51 sec. 120-240V ±10%
• Under “Required Time” in the table above, figures in parentheses are at high-speed mode. 5A (max)
• Image erase time on IP is directly related to the exposure made. It is assumed to be at 25mR for ST-VI and
Environmental Conditions:
600 mR for HR-V.
• The performance described above shows typical values. It varies depending on the exposure level.
• Operating Conditions:
Temperature: 15-30°C
Processing Capacity Humidity: 40-80%RH (No dew condensation)
IP Type Processing Capacity
• Non-operating Conditions:
Temperature: 0-45°C
ST-VI 35 ✕ 43 cm (14” ✕ 17”) Approx. 62 (87) IPs/hr. Humidity: 10-90%RH (No dew condensation)
ST-VI 35 ✕ 35 cm (14” ✕ 14”) Approx. 70 (94) IPs/hr.
ST-VI 10” ✕ 12” Approx. 73 IPs/hr.
ST-VI 8” ✕ 10” Approx. 87 IPs/hr. IP Cassette
ST-VI 24 ✕ 30 cm Approx. 75 IPs/hr.
ST-VI 18 ✕ 24 cm Approx. 92 IPs/hr.
ST-VI 15 ✕ 30 cm Approx. 73 IPs/hr. Type CC
HR-V 24 ✕ 30 cm* Approx. 61 IPs/hr.
HR-V 18 ✕ 24 cm** Approx. 70 IPs/hr.
• Figures in parentheses and conditions are the same as those of “Time Required for IP Feed/Load”.
• The time required to change the cassette is assumed to be 0 (zero) seconds.
Time to Display on CR Console:
• Approx. 42 sec. in case of 35 ✕ 43 cm (ST-VI) with 100-micron reading
• Approx. 32 sec. in case of 18 ✕ 24 cm (HR-V)** with 50-micron reading
Time to Print on DRYPIX 4000 through network via CR Console:
• Approx. 145 sec. in case of 35 ✕ 43 cm (ST-VI) with 100-micron reading
• Approx. 140 sec. in case of 18 ✕ 24 cm (HR-V)** with 50-micron reading
24 ✕ 30 cm cassette mounted with
Reading Specification Type CH the cassette adapter
Reading Specification
Inches Metric Standard Pixel-density High Pixel-density
High-speed mode Standard mode
14” ✕ 17” (ST-VI) 35 ✕ 43 cm (ST-VI) 5 pixels/mm 10 pixels/mm
14” ✕ 14” (ST-VI) 35 ✕ 35 cm (ST-VI) 5 pixels/mm 10 pixels/mm
10” ✕ 12” (ST-VI) 24 ✕ 30 cm (ST-VI) – 10 pixels/mm
8” ✕ 10” (ST-VI) 18 ✕ 24 cm (ST-VI) – 10 pixels/mm
– 15 ✕ 30 cm (ST-VI) – 10 pixels/mm
– 24 ✕ 30 cm (HR-V)* – 20 pixels/mm
– 18 ✕ 24 cm (HR-V)** – 20 pixels/mm
*Requires the optional upgrade kit and the cassette adaptor.
**Requires the optional upgrade kit.
Specifications and PC requirements are subject to change without notice.
All brand names or trademarks are the property of their respective owners.
Ref. No. XB-870E (SK·09·02·F1120·F9711) Printed in Japan ©2007 FUJIFILM Corporation
