5404/DM5404/DM7404 Hex Inverting Gates

June 1989

5404/DM5404/DM7404
Hex Inverting Gates
General Description Features
This device contains six independent gates each of which Y Alternate Military/Aerospace device (5404) is available.
performs the logic INVERT function. Contact a National Semiconductor Sales Office/Distrib-
utor for specifications.

Connection Diagram

Dual-In-Line Package

TL/F/6494 – 1
Order Number 5404DMQB, 5404FMQB, DM5404J, DM5404W, DM7404M or DM7404N
See NS Package Number J14A, M14A, N14A or W14B

Function Table
YeA
Inputs Output
A Y
L H
H L
H e High Logic Level
L e Low Logic Level

C1995 National Semiconductor Corporation TL/F/6494 RRD-B30M105/Printed in U. S. A.

Free Datasheet http://www.datasheet4u.com/

Absolute Maximum Ratings (Note)
If Military/Aerospace specified devices are required, Note: The ‘‘Absolute Maximum Ratings’’ are those values
please contact the National Semiconductor Sales beyond which the safety of the device cannot be guaran-
Office/Distributors for availability and specifications. teed. The device should not be operated at these limits. The
Supply Voltage 7V parametric values defined in the ‘‘Electrical Characteristics’’
table are not guaranteed at the absolute maximum ratings.
Input Voltage 5.5V
The ‘‘Recommended Operating Conditions’’ table will define
Operating Free Air Temperature Range the conditions for actual device operation.
DM54 and 54 b 55§ C to a 125§ C
DM74 0§ C to a 70§ C
Storage Temperature Range b 65§ C to a 150§ C

Recommended Operating Conditions

DM5404 DM7404
Symbol Parameter Units
Min Nom Max Min Nom Max
VCC Supply Voltage 4.5 5 5.5 4.75 5 5.25 V
VIH High Level Input Voltage 2 2 V
VIL Low Level Input Voltage 0.8 0.8 V
IOH High Level Output Current b 0.4 b 0.4 mA
IOL Low Level Output Current 16 16 mA
TA Free Air Operating Temperature b 55 125 0 70 §C

Electrical Characteristics
over recommended operating free air temperature range (unless otherwise noted)

Typ
Symbol Parameter Conditions Min Max Units
(Note 1)
VI Input Clamp Voltage VCC e Min, II e b12 mA b 1.5 V
VOH High Level Output VCC e Min, IOH e Max
2.4 3.4 V
Voltage VIL e Max
VOL Low Level Output VCC e Min, IOL e Max
0.2 0.4 V
Voltage VIH e Min
II Input Current @ Max VCC e Max, VI e 5.5V
1 mA
Input Voltage
IIH High Level Input Current VCC e Max, VI e 2.4V 40 mA
IIL Low Level Input Current VCC e Max, VI e 0.4V b 1.6 mA
IOS Short Circuit VCC e Max DM54 b 20 b 55
mA
Output Current (Note 2)
DM74 b 18 b 55

ICCH Supply Current with VCC e Max

6 12 mA
Outputs High
ICCL Supply Current with VCC e Max
18 33 mA
Outputs Low

Switching Characteristics at VCC e 5V and TA e 25§ C (See Section 1 for Test Waveforms and Output Load)
Symbol Parameter Conditions Min Max Units
tPLH Propagation Delay Time CL e 15 pF
22 ns
Low to High Level Output RL e 400X
tPHL Propagation Delay Time
15 ns
High to Low Level Output
Note 1: All typicals are at VCC e 5V, TA e 25§ C.
Note 2: Not more than one output should be shorted at a time.

2
3
Physical Dimensions inches (millimeters)

14-Lead Ceramic Dual-In-Line Package (J)

Order Number 5404DMQB or DM5404J
NS Package Number J14A

4
Physical Dimensions inches (millimeters) (Continued)

14-Lead Small Outline Molded Package (M)

Order Number DM7404M
NS Package Number M14A

14-Lead Molded Dual-In-Line Package (N)

Order Number DM7404N
NS Package Number N14A

5
5404/DM5404/DM7404 Hex Inverting Gates
Physical Dimensions inches (millimeters) (Continued)

14-Lead Ceramic Flat Package (W)

Order Number 5404FMQB or DM5404W
NS Package Number W14B

LIFE SUPPORT POLICY

NATIONAL’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT
DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF NATIONAL
SEMICONDUCTOR CORPORATION. As used herein:

1. Life support devices or systems are devices or 2. A critical component is any component of a life
systems which, (a) are intended for surgical implant support device or system whose failure to perform can
into the body, or (b) support or sustain life, and whose be reasonably expected to cause the failure of the life
failure to perform, when properly used in accordance support device or system, or to affect its safety or
with instructions for use provided in the labeling, can effectiveness.
be reasonably expected to result in a significant injury
to the user.

National Semiconductor National Semiconductor National Semiconductor National Semiconductor

Corporation Europe Hong Kong Ltd. Japan Ltd.
1111 West Bardin Road Fax: (a49) 0-180-530 85 86 13th Floor, Straight Block, Tel: 81-043-299-2309
Arlington, TX 76017 Email: cnjwge @ tevm2.nsc.com Ocean Centre, 5 Canton Rd. Fax: 81-043-299-2408
Tel: 1(800) 272-9959 Deutsch Tel: (a49) 0-180-530 85 85 Tsimshatsui, Kowloon
Fax: 1(800) 737-7018 English Tel: (a49) 0-180-532 78 32 Hong Kong
Fran3ais Tel: (a49) 0-180-532 93 58 Tel: (852) 2737-1600
Italiano Tel: (a49) 0-180-534 16 80 Fax: (852) 2736-9960

National does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and National reserves the right at any time without notice to change said circuitry and specifications.