HDP 140 High Pressure Pump Series

Design criteria

-Hammelmann high pressure pumps are built to operate at the continuous

maximum duty stated in the performance parameters. Just compare the
crankshaft speed, average plunger speed, plunger diameter and power rating.

High pressure pump

Weight: approx. 838 lbs

Features

 Power ratings up to 190 HP

 Vertical 3 cylinder design
 Wide variety of complementary
ancillaries

Quality and reliability

 Crank section calculation by

Stationary unit ‘Finite element method’ ensures
with electric motor long working life under continuous
Length: 76.8 inch load
Width: 33.5 inch
Height: 52 inch  Stainless steel pump head free of
Weight: approx. 3528 lbs alternating stress
at 147 HP
 Integral speed reduction gear
 Pressurised oil lubrication system
with oil cooler/filter
Main dimensions without accessories such
as suction line, pressure regulator etc.  Bellows form hermetic seal
Detailed dimensional drawings and weights between the suction chamber and
available on request.
crank section
 Solid ceramic or tungsten carbide
Stationary unit plungers
with diesel motor  Choice of application specific seal
Length: 82.7 inch assemblies
Width: 51.2 inch
Height: 63 inch  Choice of bronze (standard) or
Weight: approx. 3672 lbs stainless steel suction chamber
at 214 HP without
full fuel tank
HDP 140 series, technical data
Performance parameters (Standard design)
Note: Actual flow rates for water as pumped medium
(volumetric efficiency has already been taken into account).  Rod force: 19,783 lbf
Required power rating [HP]  Stroke: 2.20 inch
Q r.p.m.
HDP
[GPM]
60 75 100 120 150 190 D  Mean piston speed at n2
Operating pressure [psi] n1 n2
390 r.p.m. = 2.36 fee/sec
2.6* 34800* 43500* 58000* 1500 390
3.2* 29000* 35520* 47850* 58000* 15 1500/1800 467
467 r.p.m. = 2.82 feet/sec
3.7* 22470 29000* 39870* 47850* 60900* 1800/2150 560 560 r.p.m. = 3.38 feet/sec
4.0/3.4* 24070 29440* 39880* 46400* 1500 390
144

4.8/4.2* 20160 24650 33640* 40310* 46400* 17,5 1500/1800 467

Typical high pressure
5.8/5.0* 16680 20450 27840* 33500* 40890* 46400* 1800/2150 560
5.0/4.8* 18420 22480 30600* 36830* 40600* 1500 390 pump units
6.1/5.5* 15370 18850 25670 30890* 37700* 20 1500/1800 467
7.1/6.6* 12760 15660 21320 25670 31320* 40600* 1800/2150 560
*Ultra high pressure
7.9 11750 14360 19580 23490 26100 1500 390
9.5 9860 12040 16530 19720 24070 25 1500/1800 467
143

11.1 8270 10010 13630 16390 20010 26100 1800/2150 560

9.8 9280 11310 15370 18560 20740 1500 390
11.9 7690 9430 12760 15370 18850 28 1500/1800 467
14.0 6530 7830 10730 12910 15810 20740 1800/2150 560
11.4 8120 10010 13630 16390 17980 1500 390
13.5 6820 8410 11460 13780 16820 30 1500/1800 467
16.1 5660 6960 9430 11460 13920 17980 1800/2150 560  Stationary unit with
13.7 6820 8410 11460 13490 14940 1500 390 electric motor
16.6 5660 6960 9428 11310 13780 14940 33 1500/1800 467
19.8 4790 5800 7980 9430 11600 13920 1800/2150 560
15.8 5950 7400 10010 12040 13200 1500 390
18.5 5080 6090 8410 10010 12330 35 1500/1800 467
22.2 4210 5080 6960 8410 10300 13200 1800/2150 560
20.6 4640 5660 7690 9140 10150 1500 390
24.6 3920 4790 6380 7690 9430 10150 40 1500/1800 467
29.3 3190 3920 5370 6380 7830 9860 1800/2150 560
26.4 3630 4500 6090 7250 7980 1500 390
31.4 3050 3770 5080 6090 7400 7980 45 1500/1800 467
37.5 2470 3050 4210 5080 6240 7690 1800/2150 560
142

 Road going or stationary

32.7 2900 3630 4930 5950 6530 1500 390
39.1 2470 3050 4060 4930 6090 6530 50 1500/1800 467 trailer units with sound
46.7 2030 2470 3480 4060 5080 6240 1800/2150 560 damping cover
39.6 2470 3050 4060 4930 5370 1500 390
47.3 2030 2470 3340 4060 4930 5370 55 1500/1800 467
56.5 1740 2030 2760 3340 4210 5080 1800/2150 560
46.5 2030 2470 3340 4060 4500 1500 390
55.7 1740 2030 2900 3480 4210 4500 60 1500/1800 467
66.5 1450 1740 2320 2900 3480 4350 1800/2150 560
54.6 1740 2030 2900 3480 3920 1500 390
65.5 1450 1740 2320 2900 3480 3920 65 1500/1800 467
78.1 1160 1450 2030 2320 2900 3630 1800/2150 560
63.4 1450 1890 2470 3050 3340 1500 390
75.8 1310 1600 2030 2470 3050 3340 70 1500/1800 467
90.6 1020 1310 1740 2030 2610 3190 1800/2150 560 10 or 20 foot sound
HDP Seal ** Sealing system D = Piston/Plunger dia. [mm]
damped container
Dynamic Tungsten carbide plunger & bushing n1 = Motor/Engine r.p.m. versions
144 n2 = Crankshaft r.p.m.
Packing Special ceramic plunger *** / packing
Dynamic Ceramic plunger / bronze bushing Conversion table
143 Rating 1 hp = 0,746 kW
Packing Ceramic plunger / packing
Op.pressure 1 psi = 0,069 bar
Dynamic Ceramic plunger / bronze bushing
142 Flow rate 1 gpm = 0,227 m³/h Hammelmann plunger
Packing Ceramik plunger / packing
pumps convert 93 to
** The dynamic high pressure sealing extends the advantages of
the labyrinth design with further increased efficiency.
98 % of the shaft power
*** Special ceramic plungers up to max. 46,400 psi to hydraulic energy.

Hammelmann Corp. 436 Southpointe Drive Phone (001) 937-859-8777

Miamisburg, Ohio 45342 Fax: (001) 937-859-9188
eMail: mail@hammelmann.com http://www.hammelmann.com
06/20 © Copyright Hammelmann GmbH, Oelde, Germany. Subject to modification.