STRONG RGU40PS
60Hz@1800RPM 380/220V 3PH
General features
Silent generator with following specifications:
Frame:
- Heavy duty fabricated welded base plate with high quality steel UNI
S235 JR
- Heavy duty, bell type, rubber anti-vibration mountings
- Fuel tank with drain plug and retention basin
- Feet and four lifting holes on the base
- Oil draining mechanical pump
Canopy:
- Four large doors for easy access for service and maintenance
- Electro-galvanized sheet DC01+ZE25/25 (EN 10152: 2009)
- High precision sheet cutting with nitrogen laser technology to avoid
oxidation
- Sandblasting and cataphoresis treatment of intake / exhaust grids
- Weatherproof sealed joints
- Lockable handles in each door
- Grey RAL 7035 “orange peel” specific powder coat paint for outdoor
Picture for illustration purposes only usage
- Rain cap on exhaust outlet
- Coolant refilling specific hatch
Overall performance RGU40PS - Fuel filler outside enclosure
- Ecological Sound foam: 100% Recyclable, 35mm thickness, fire-proof
self-extinguishing class1 fire-reaction compliant washable, mechanically
PRP Continous power kVA 35 fixed to the frame
PRP Continuous power kW 28 Muffler:
- Residential type
LTP Stand-by power kVA 38 - Integrated in the canopy
- With aluminum coating
LTP stand-by power kW 31
Power factor cos fiφ Control Panel:
0.8 - Metal Control panel with protective back cover
- Dedicated area to make easier the electrical connection to the load
Voltage VAC 380/220
All units and components are prototype tested, factory build and
Frecuency Hz 60 production tested. A specific control procedure during the several stages
of production ensures long life and reliability.
Ampere PRP/LTP 53 / 58
Speed RPM 1800
Dimensions and noise level
Length mm 2213
Width mm 960
Height mm 1258
Net Weight kg 963
Gross Weight kg 988
Sound pressure at 7 mt dBA -
Data reference
Standard reference conditions temperature 25°C, altitude 100m asl, relative humidity 30%, atmospheric pressure 100 kPa (1 bar), power factor 0.8 lag, balanced load - non distortional. Fuel consumption is nominal and
refers to specific weight 0.850 gr/lt. Power performance data as quoted can be obtained after the initial running-in period of the engine, during which one has to follow the instructions of the engine manufacturer as stated in
the use and maintenance manual of the specific engine. The tolerance shown by the engine manufacturer is +/- 5%. Sound power values refer to free field conditions: the installation site may influence the values.
Dimensions, weights and other specifications contained in the technical data sheet and related attachments are nominal, subject to tolerances and refer to the model with standard equipment; any optional and additional
equipment/accessories can modify weight, dimensions, performance.P.R.P. Prime Power-Continuous power at variable load: The power that a genset can supply in continuous service at a variable load for an unlimited
number of hours per year while respecting the maintenance intervals established in the environmental conditions stated by the Manufacturer. according to ISO8528-1. The average power supplied over time and any
applicable overload must be less than the percentages stated by the Manufacturer.L.T.P. Limited-time running power-Limited power: The maximum power that a genset can supply for a limited time respecting the
maintenance intervals established in the environmental conditions stated by the Manufacturer according to ISO 8528-1.The number of hours per year is stated by the Manufacturer. Overload is not permitted.*For reasons
of transport and/or storage, liquids (oil and antifreeze) and batteries might not be included in the delivery.
Page
© 2017 GENMAC – P.I./VAT IT 01224860351 – cap. soc. € 100.000,00 i.v. / R.E.A. RE n.170570 – Reg. Imp. RE n.01524820402 1 of 2
Export M/RE012315 – Code: 982 Revision: 00-26/09/2015
STRONG RGU40PS
60Hz@1800RPM 380/220V 3PH
Engine general data Fuel consumption
Engine brand Perkins Consumption 25% l./h 3.10
Model 1103A-33G Consumption 50% l./h 4.90
PRP Power kW 32.20 Consumption 75% l./h 6.60
LTP Power kW 35.40 Consumption 100% l./h 8.60
Fuel Diesel Autonomy at 75% of load h. ≈ 15 h
Nr. cylinders 3
Engine liquids and equipment
Air intake Aspirated
Type of lubricant Oil SAE 15W40
Cooling Water
Lubrication capacity l.* 8.30
Cubic capacity l. 3.30
Type of coolant Antifreeze liquid
Speed regulation Mechanical
Coolant capacity l.* 10.20
Regulator precision +/-% G2 - 0.75
Air intake filter Paper cartridge
Voltage VDC 12
Battery capacity Ah 70
Emissions -
Number of batteries* 1
Alternator general data
Fuel system and energy balance
Alternator brand Mecc-Alte
Model ECP32-2S/4C AC pump suction head kPa 2
Type of excitation Self-excited Combustion air flow volume LTP m3/min 2.57
Type of regulation AVR Cooling air capacity LTP m3/min 70.00
Regulator precision +/-% 1.00 Exhaust gas flow-density LTP m3/min 6.60
Exhaust gas temperature LTP °C 530.00
Brake mean effective pressure kPa 10.00
Structure data Energy to exhaust LTP kWt 34.00
Type of structure STRONG Energy to coolant LTP kWt 22.00
Tank capacity l. 100 Energy to radiation LTP kWt 6.00
Retention basin yes
Exhaust diameter mm 50
Control panel features
QFIA-4520
Protection cover
Circuit breaker
AMF controller DSE4520
- Voltmeter, Frequencymeter, Ammeter
- Generator power (kW, kV Ar, kV A & pf) monitoring
- Hour meter
- Fuel level meter
- Overload (kW & kV Ar) protection
- Low oil pressure protection
- High coolant temperature protection
- Low fuel level protection
- Battery charger alternator fault
- Rpm protection
Emergency stop button
Terminal board for ATS connection
Battery charger
On/off switch Dealer
Page
© 2017 GENMAC – P.I./VAT IT 01224860351 – cap. soc. € 100.000,00 i.v. / R.E.A. RE n.170570 – Reg. Imp. RE n.01524820402 2 of 2
Export M/RE012315 – Code: 982 Revision: 00-26/09/2015
Powered by TCPDF (www.tcpdf.org)
