FLEXIM - Flexible Industrial Measurement

PRODUCT CATALOGUE
_________

Clamp-on ultrasonic flow measurement

and process analytics

Non-intrusive flow
measurement with
FLUXUS®
 Liquids
 Gases
 Thermal energy

Non-intrusive process
analytics with PIOX® S
 Concentration
 Density
 Mass flow rate

PIOX® R
process refractometer
 Concentration
 Density
 ° Brix etc.
 Contents
Non-intrusive flow measurement with clamp-on ultrasonic technology 4

Transmitters

Portable flowmeters – for non-explosive areas 6

Portable flowmeters – for potentially explosive areas 8

Stationary measuring transmitters - for non-explosive areas 10

Stationary measuring transmitters - for potentially explosive areas 12

Transducers

For liquid flow measurement 14

For gas flow measurement 15

Portable and permanent transducer mounting fixtures 16

Real-time process analytics 19

PIOX® S ultrasonic process analyser 20

PIOX® R inline process refractometer 22

2
 FLEXIM
Flexible Industrial Measurement Technology

Measurement technology made in Berlin – used worldwide

FLEXIM develops, manufactures, and sells advanced process measuring devices for industrial applications.
For more than 25 years, non-intrusive ultrasonic flow measurement has its name: FLUXUS®. The name PIOX®
stands for process analytics – non-intrusive with the PIOX® S ultrasonic analyser, wetted with the PIOX® R
transmitted light refractometer.

If it flows, FLUXUS® will measure it. Progressive process analytics with PIOX®

FLEXIM’s FLUXUS® ultrasonic flowmeters are used Clamp-on ultrasonic technology can also be used
wherever something flows. Non-intrusive clamp-on for process analytics through non-intrusive deter-
ultrasonic technology opens up an unrivalled wide mination of the acoustic velocity in the medium.
range of applications. FLUXUS® reliably measures PIOX® S ultrasonic systems really stand the test in
on very small tubes (e.g. DN 6 tubes in paint fin- applications where wetted measuring equipment is
ishing systems) and very large pipes (e.g. DN 6500 subject to considerable wear and tear, for example
downpipes in hydropower plants). during concentration and mass flow measurements
of acids.
The field of application is not only limited to liquids.
FLEXIM is also particularly proud of its pioneering Measurement of light refraction is a proven method
work carried out in transferring ultrasonic tech- for determining concentrations. Laboratory accu-
nology to the non-intrusive flow measurement of racy is ensured in the process with the patented
gases. Clamp-on measuring technology also covers PIOX® R transmitted light refractometer.
an extraordinary range of applications in this area
If both measuring methods are combined, multi-
– from the recording of quantities drawn off by in-
component mixtures can also be analysed accu-
dividual pneumatic consumers in a compressed air
rately and reliably.
network, to the non-intrusive measurement of gas
quantities conveyed in a gas transmission pipeline.

3
FLUXUS ®
Non-intrusive flow measurement with
clamp-on ultrasonic technology

FLUXUS® measures flow rates non-intrusively with ultrasound. Clamp-on ultrasonic transducers are simply
mounted on the outside of the pipe. The practical advantages are obvious: no wear and tear by the medium flowing
inside the pipe, no risk of liquid leakage or fugitive gas emissions, no pressure loss and, above all, unlimited plant
availability.

FLUXUS® measures the difference Versatile clamp-on solution

FLUXUS® clamp-on ultrasonic systems determine the The non-intrusive acoustic measuring method is in-
volume flow according to the transit-time difference ertia-free and is characterised by very high measur-
method: since the ultrasonic signal that is injected ing dynamics in both flow directions. When combined
into the pipe is carried by the medium flowing inside, with density measurement, the transit-time differ-
a time delay occurs between the acoustic transit time ence measurement is suitable for determining the
both with and against the flow direction. This time volume flow rate and mass flow rate of liquids. When
delay can be measured very accurately. The measuring combined with pressure measurement, it is suitable
transmitter calculates the volume flow rate based for determining the standard volume flow of gases.
on the parameters input for the pipe geometry and A particularly practical use for the non-intrusive
the physical properties of the medium stored in the measuring technique is the fact that the current
internal database. power of liquid-based thermal consumers, e.g. heat-
ing or cooling systems, can be easily recorded.
FLUXUS® clamp-on ultrasonic systems allow for the
flow measurement of almost all liquid and gaseous As a technology leader in clamp-on ultrasonic sys-
media – even those with increased inputs of solids and tems, FLEXIM has developed two sensor technol-
gas (<10%) or even wet gas (LVF <5%). ogies for non-intrusive flow measurement: shear
wave transducers for the flow measurement of
liquids and Lamb wave transducers for the flow
measurement of gases. By means of these two tech-
nologies and the internal, automatic compensation
of varying ambient temperatures, FLEXIM ensures
maximum measuring accuracy and reliability, even
under difficult conditions.

4
 FLEXIM
Flexible Industrial Measurement

Fundamentally flexible Proven accuracy

Non-intrusive clamp-on technology offers maximum The reliability and accuracy of measuring systems
flexibility and the sophisticated electronics of FLUXUS® depend on the quality of their manufacturing and cali-
ensure the highest degree of reliability. The measuring bration. Consistent quality management according to
system, which consists of a transmitter and VARIOFIX DIN ISO 9001 is absolutely essential for FLEXIM. From
transducer system, can be adapted optimally to spe- the moment the goods arrive at the warehouse to the
cific requirements. moment the finished measuring system is shipped,
operational checks are carried out at every single pro-
The product range of the FLUXUS® series covers a duction stage and everything is documented. Paired
wide spectrum of various measuring transmitters transducers ensure high measuring accuracy of the
and transducers, from basic devices for standard ap- measuring systems.
plications to measuring systems for usage offshore.
It goes without saying; this also includes transmitters Calibration is carried out on individual calibration
and transducers which can be used in potentially equipment according to national standards. FLEXIM
explosive areas as well as in applications where a SIL2 calibrates pairs of transducers and measuring trans-
qualification is needed. mitters independently of one another so that the
narrowly defined measurement uncertainties are
always observed, regardless of which transducers are
used with which measuring transmitters.

5
Portable Flow Meters FLUXUS® F401 and F601

Liquids & Thermal Energy

FLUXUS® F401 The portable FLUXUS® F401 is a single channel meter for the flow measurement
(Water) of water and wastewater streams (<6 % of solid / gas content by volume). It is
equipped with IP68 transducers and housed in an IP67 enclosure for long term
remote measurements outdoor.
Measurement uncertainty
(volumetric flow rate): ±2 % of reading ±0.01 m/s
Transmitter:
Explosion protection: –
Power supply: Power supply unit 100 ... 230 V AC / 50 ... 60 Hz, 12 V DC (socket at transmitter)
integrated battery Li-Ion, up to 60 days operating time (minimum nightflow mode)
Outputs: 4 - 20 mA passive, pulse / frequency / binary
4.99 Inputs: –
Digital communication: –
Available transducers:
1.50

Explosion protection: –
9.76

1.50

Pipe size range

(inner diameter): 40 mm ... 4700 mm
Temperature range
10.75

(pipe wall): -40 °C ... +100 °C

FLUXUS® F601 The portable FLUXUS® F601 Energy is the ideal metering solution for flexible
(Liquids) operation during temporary control and service tasks on all liquid filled pipes
independent of the flowing medium.

Measurement uncertainty
(volumetric flow rate): ±1 % of reading ±0.005 m/s
Transmitter:
Explosion protection: –
Power supply: Power supply unit 100 ... 230 V AC / 50 ... 60 Hz, 12 V DC (socket at transmitter)
integrated battery Li-Ion, > 25 h operating time
Outputs: 4 - 20 mA active / passive, pulse / frequency / binary
226 59 Inputs: –
Digital communication: Modbus RTU
Available transducers:
Explosion protection: –
213

Pipe size range

(inner diameter): 6 mm ... 6500 mm
Temperature range
(pipe wall): -40 °C ... +200 °C / WI: -200 °C ... + 600 °C
FLUXUS® F601 Energy The portable FLUXUS® F601 Energy is the ideal solution for flexible
(Liquids & operation during thermal energy as well as liquid flow metering and associated
Thermal Energy) service tasks.

Measurement uncertainty
(volumetric flow rate): ±1 % of reading ±0.005 m/s
Transmitter:
Explosion protection: –
Power supply: Power supply unit 100 ... 230 V AC / 50 ... 60 Hz, 12 V DC (socket at transmitter)
integrated battery Li-Ion, > 25 h operating time
Outputs: 4 - 20 mA active / passive, pulse / frequency / binary
226 59 Inputs: Pt100 / Pt1000, 4 - 20 mA passive
Digital communication: Modbus RTU
Available transducers:
Explosion protection: –
213

Pipe size range

(inner diameter): 6 mm ... 6500 mm
Temperature range
(pipe wall): -40 °C ... +200 °C / WI: -200 °C ... + 600 °C

6
 Portable Flow Meters FLUXUS® G601

Gases, Compressed Air, Liquids & Thermal Energy

FLUXUS® G601 The portable FLUXUS® G601 is the ideal metering solution for flexible operation
(Gases & Liquids) during temporary control and service tasks on gas filled pipes. It also allows the
measurememt at liquid filled pipes.

Measurement uncertainty
(volumetric flow rate):
Liquids ± 1% of reading ± 0.005 m/s
Gases ±1...3 % of reading ±0.005 m/s, depending on application
Transmitter: Standard Multifunctional
Explosion protection: –
Power supply: Power supply unit 100 ... 230 V AC / 50 ... 60 Hz, 12 V DC (socket at transmitter)
integrated battery Li-Ion, > 25 h operating time
Outputs: 4 - 20 mA active / passive, pulse / frequency / binary
Inputs: – Pt100 / Pt1000, 4 - 20 mA passive
226 59
Digital communication: Modbus RTU
Available transducers:
Explosion protection: –
Pipe size range
213

(inner diameter):
Liquids 6 mm ... 6500 mm
Gases 7 mm ... 1600 mm
Temperature range
(pipe wall):
Liquids -40 °C ... +200 °C / WI: -200 °C ... + 600 °C
Gases -40 °C ... +200 °C
FLUXUS® G601 CA The portable FLUXUS® G601 CA Energy is the ideal metering solution for flexible
Energy operation during temporary control and service tasks. It allows the measurement
(Gases, Compressed Air, of liquids, gases (incl. compressed air) and thermal energy quantities combined
Liquids & Thermal Energy) in one device.
Measurement uncertainty
(volumetric flow rate):
Liquids ± 1% of reading ± 0.005 m/s
Gases ±1...3 % of reading ±0.005 m/s, depending on application
Transmitter:
Explosion protection: –
Power supply: Power supply unit 100 ... 230 V AC / 50 ... 60 Hz, 12 V DC (socket at transmitter)
integrated battery Li-Ion, > 25 h operating time
Outputs: 4 - 20 mA active / passive, pulse / frequency /binary
Inputs: Pt100 / Pt1000, 4 - 20 mA passive
Digital communication: Modbus RTU
Available transducers:
226 59

Explosion protection: –
Pipe size range
(inner diameter):
213

Liquids 6 mm ... 6500 mm

Gases 7 mm ... 1600 mm
Temperature range
(pipe wall):
Liquids -40 °C ... +200 °C / WI: -200 °C ... + 600 °C
Gases -40 °C ... +200 °C

7
Portable Flow Meter FLUXUS® F608

Liquids & Thermal Energy

ATEX (IECEx) Zone 2, FM Class I, Div. 2 certified
(Transducers certified for ATEX (IECEx) Zones 1 and 2, FM Class I, Div. 2)

FLUXUS® F608 The portable FLUXUS® F608 is the ideal metering solution for flow measure-
(Liquids) ments on liquid filled pipes located in hazardous areas being ATEX (IECEx) Zone 2
and FM Class I, Div. 2 certified.

Measurement uncertainty
(volumetric flow rate): ±1 % of reading ±0.005 m/s
Transmitter:
Explosion protection: ATEX/IECEx zone 2, FM Class I, Div. 2
Power supply: Power supply unit 100 ... 230 V AC / 50 ... 60 Hz, only for use in non-ex areas
12 V DC (socket at transmitter) integrated battery Li-Ion, > 25 h operating time
Outputs: 4 - 20 mA active / passive, pulse / frequency / binary
226 59
Inputs: –
Digital communication: –
Available transducers:
Explosion protection: ATEX/IECEx zone 1 / zone 2, FM Class I, Div. 2
Pipe size range
213

(inner diameter): 6 mm ... 6500 mm

Temperature range
(pipe wall): -40 °C ... +200 °C / WI: -200 °C ... + 600 °C
FLUXUS® F608 Energy The portable FLUXUS® F608 Energy is the ideal liquid flow as well as thermal
(Liquids & Thermal Energy) energy metering solution for applications located in hazardous areas being ATEX
(IECEx) Zone 2 and FM Class I, Div. 2 certified.

Measurement uncertainty
(volumetric flow rate): ±1 % of reading ±0.005 m/s
Transmitter:
Explosion protection: ATEX/IECEx zone 2, FM Class I, Div. 2
Power supply: Power supply unit 100 ... 230 V AC / 50 ... 60 Hz, only for use in non-ex areas
12 V DC (socket at transmitter) integrated battery Li-Ion, > 25 h operating time
Outputs: 4 - 20 mA active / passive, pulse / frequency / binary
Inputs: Pt100 / Pt1000
226 59
Digital communication: –

Available transducers:
Explosion protection: ATEX/IECEx zone 1 / zone 2, FM Class I, Div. 2
213

Pipe size range

(inner diameter): 6 mm ... 6500 mm
Temperature range
(pipe wall): -40 °C ... +200 °C / WI: -200 °C ... + 600 °C

8
 Portable Flow Meters FLUXUS® G608

Gases, Compressed Air, Liquids & Thermal Energy

ATEX (IECEx) Zone 2, FM Class I, Div. 2 certified
(Transducers certified for ATEX (IECEx) Zones 1 and 2, FM Class I, Div. 2)

FLUXUS® G608 The portable FLUXUS® G608 is the ideal metering solution for flow measure-
(Gases & Liquids) ments on gas pipes located in hazardous areas being ATEX (IECEx) Zone 2 and FM
Class I, Div. 2 certified. It also allows the measurememt at liquid filled pipes.

Measurement uncertainty
(volumetric flow rate):
Liquids ± 1% of reading ± 0.005 m/s
Gases ±1...3 % of reading ±0.005 m/s, depending on application
Transmitter:
Explosion protection: ATEX/IECEx zone 2, FM Class I, Div. 2
Power supply: Power supply unit 100 ... 230 V AC / 50 ... 60 Hz, only for use in non-ex areas
12 V DC (socket at transmitter) integrated battery Li-Ion, > 25 h operating time
Outputs: 4 - 20 mA active / passive, pulse / frequency / binary (only available for
ATEX/IECEx Zone 2 approved version)
Inputs: –
Digital communication: –
226 59
Available transducers:
Explosion protection: ATEX/IECEx zone 1 / zone 2, FM Class I, Div. 2
Pipe size range
(inner diameter):
213

Liquids 6 mm ... 6500 mm

Gases 7 mm ... 1600 mm
Temperature range
(pipe wall):
Liquids -40 °C ... +200 °C / WI: -200 °C ... + 600 °C
Gases -40 °C ... +200 °C
FLUXUS® G608 The portable FLUXUS® G608 CA Energy is a meter that can measure liquid and
CA Energy gas (incl. compressed air) flow rates as well as quantify thermal energy flows. It
(Gases, Compressed Air, is specifically designed for use in hazardous areas and thus ATEX (IECEx) Zone 2
Liquids & Thermal Energy) and FM Class I, Div. 2 certified.
Measurement uncertainty
(volumetric flow rate):
Liquids ± 1% of reading ± 0.005 m/s
Gases ±1...3 % of reading ±0.005 m/s, depending on application
Transmitter:
Explosion protection: ATEX/IECEx zone 2, FM Class I, Div. 2
Power supply: Power supply unit 100 ... 230 V AC / 50 ... 60 Hz, only for use in non-ex areas
12 V DC (socket at transmitter) integrated battery Li-Ion, > 25 h operating time
Outputs: 4 - 20 mA active / passive, pulse / frequency / binary
Inputs: Pt100 / Pt1000
Digital communication: –
Available transducers:
Explosion protection: ATEX/IECEx zone 1 / zone 2, FM Class I, Div. 2
226 59

Pipe size range

(inner diameter):
Liquids 6 mm ... 6500 mm
213

Gases 7 mm ... 1600 mm

Temperature range
(pipe wall):
Liquids -40 °C ... +200 °C / WI: -200 °C ... + 600 °C
Gases -40 °C ... +200 °C

9
Stationary Transmitters

Liquids (F) and Thermal Energy (F-TE)

Non-ex and ATEX (IECEx) Zone 2, FM Class I, Div. 2 certified

FLUXUS® F50X The FLUXUS® F50X is a basic meter available in dedicated solution packages
(Water & Thermal Energy) for water, thermal energy and flexible tubing applications. The basic meter
FLUXUS® F501 is designed for water / glycol applications, in connection with IP68
rated transducers allowing for measurements at buried water supply lines.
Measurement uncertainty
(volumetric flow rate): ± 1.5% of reading ± 0.01 m/s
Transmitter: F501 F502 TE – Thermal F501 Semiconductor
Energy (Water only) (for liquids in tubes)
Explosion protection: –
Power supply: 100 ... 230 V AC / 50 ... 60 Hz, 12 / 24 V DC
Outputs: 4 - 20 mA active, pulse / binary
Inputs: – Pt100 / Pt1000 –
Digital communication: Modbus RTU, BACnet , MS/TP, M-Bus
165

Available transducers:
Ø 8.4

Ø 4.5

Explosion protection: –
103
140

Pipe size range OD ⅜'', ½'', ¾'', 1'', 1¼'',

10
(inner diameter): 10 mm ... 2400 mm 25 mm ... 500 mm 1½''
Temperature range
180 71

(pipe wall): -40 °C ... +100 °C -40 °C ... +100 °C -20 °C ... +100 °C
FLUXUS F721 ® The non-invasive FLUXUS F721 ultrasonic liquid flow meter is setting
®

(Liquids) standards in terms of measurement performance. In conjunction with the

FLUXUS® F704 TE F704 TE for thermal energy metering, they are the state-of-the art meters in
(Liquids & Thermal Energy) terms of accuracy and reliability.
Measurement uncertainty
(volumetric flow rate): ± 1% of reading ± 0.005 m/s
Transmitter: F721 F704 TE – Thermal Energy

Explosion protection: ATEX/IECEx Zone 2, FM Class I /Div 2 -

Power supply: 100 ... 230 V AC / 50 ... 60 Hz, 12 / 24 V DC
Outputs: 4 - 20 mA active / passive, pulse / frequency / binary
Inputs: Pt100 / Pt1000, 4 - 20 mA active / Pt100 / Pt1000
passive, binary
Digital communication: Modbus RTU/TCP, BACnet MSTP/IP, Modbus RTU, HART, BACnet MS/TP,
B
M-Bus, Profibus PA, Foundation Fieldbus M-Bus
Available transducers:
Explosion protection: ATEX/IECEx Zone 1 / –
261

Zone 2 FM Class I / Div2

10
8,5

329 106,2
12,2 Pipe size range
(inner diameter): 6 mm ... 6500 mm 25 mm ... 1000 mm
Temperature range
(pipe wall): -40 °C ... +240 °C / WI: -200 °C ... +600 °C -40 °C ... +200 °C
FLUXUS® F706 The non-invasive 4-channel ultrasonic liquid flow meter FLUXUS® F706 offers
(Liquids) highest precision and is used for control and redundancy measurements of
custody transfer meters or for usage in protective systems for leak detection.

Measurement uncertainty
(volumetric flow rate): ± 1% of reading ± 0.005 m/s
Transmitter:
Explosion protection: ATEX/IECEx zone 2, FM Class I /Div 2
Power supply: 100 ... 230 V AC / 50 ... 60 Hz, 12 / 24 V DC
Outputs: 4-20 mA active /passive, 4-20 mA HART active/passive,
pulse / frequency / binary
Inputs: Pt100 /Pt1000, 4-20 mA active /passive binary
287
265
70
10 Digital communication: Modbus RTU, Foundation Fieldbus
Available transducers:
Ø 4.5

Explosion protection: ATEX/IECEx zone 1 / zone 2 FM Class I / Div2

200
163

Pipe size range

(inner diameter): 6 mm ... 6500 mm
Temperature range
(pipe wall): -40 °C ... +240 °C / WI: -200 °C ... +600 °C

10 ** SIL2 approved products are available®

 Stationary Transmitters

Water (WD) and Gases (G & CA)

Non-ex and ATEX (IECEx) Zone 2, FM Class I, Div. 2 certified

FLUXUS® F721WD The FLUXUS® F721WD is the ideal flow metering solution for water suppliers.
(Water) With their IP68 rated transducers the meters can easily be buried underground and
work on even the most difficult pipes.

Measurement uncertainty
(volumetric flow rate): ± 1% of reading ± 0.005 m/s
Transmitter:
Explosion protection: –
Power supply: 100 ... 230 V AC / 50 ... 60 Hz, 12 / 24 V DC
Outputs: 4 - 20 mA active / passive, 4 - 20 mA HART active /passive, pulse / frequency / binary
Inputs: –
Digital communication: Modbus RTU/TCP, BACnet MSTP/IP, M-Bus, Profibus PA, Foundation Fieldbus

Available transducers:
B

Explosion protection: –
261

Pipe size range

10
8,5

12,2
(inner diameter): 50 mm ... 6500 mm
Temperature range
329 106,2

(pipe wall): -40 °C ... +130 °C

FLUXUS G721
® The non-invasive FLUXUS® G721 ultrasonic gas flow meter is FLEXIM‘s most
(Gases) advanced gas flow meter. Engineered for highly precise measurements under all
FLUXUS® G704CA circumstances, it is the state-of-the-art flow meter for any gaseous medium.
(Compressed Air)
Measurement uncertainty
(volumetric flow rate): ±1...3 % of reading ±0.005 m/s, depending on application
Transmitter: G721 G704CA
Compressed Air and Industrial Gases
Explosion protection: ATEX/IECEx zone 2, FM Class I /Div 2 –
Power supply: 100 ... 230 V AC / 50 ... 60 Hz, 12 / 24 V DC
Outputs: 4 - 20 mA active, 4- 20 mA HART active / passive, pulse / frequency / binary

Inputs: Pt100 / Pt1000, 4 - 20 mA active / passive, binary

B
Digital communication: Modbus RTU/TCP, BACnet MSTP/IP, Modbus RTU, BACnet MS/TP, M-Bus
M-Bus, Profibus PA, Foundation Fieldbus
Available transducers:
261

Explosion protection: ATEX/IECEx Zone 2, FM Class I /Div 2 –

10
8,5

329 106,2
12,2 Pipe size range (inner
diameter): 7 mm ... 1600 mm 7 mm ... 250 mm
Temperature range
(pipe wall): -40 °C ... +240 °C -40 °C ... +150 °C
FLUXUS® G706 The non-invasive 4-Channel ultrasonic gas flow meter FLUXUS® G706 offers
(Gases) highest precision and is used for control and redundancy measurements of
custody transfer meters or for usage in protective systems for leak detection.

Measurement uncertainty
(volumetric flow rate): ±1...3 % of reading ±0.005 m/s, depending on application
Transmitter:
Explosion protection: ATEX/IECEx zone 2, FM Class I, Div. 2
Power supply: 100 ... 230 V AC / 50 ... 60 Hz, 12 / 24 V DC
Outputs: 4 - 20 mA active / passive, 4 - 20 mA HART active / passive,
pulse / frequency / binary
Inputs: Pt100 / Pt1000, 4 - 20 mA active / passive, binary
287
265
70
10 Digital communication: Modbus RTU, Foundation Fieldbus
Available transducers:
Ø 4.5

Explosion protection: ATEX/IECEx zone 1 / zone 2, FM Class I, Div. 2

200
163

Pipe size range

(inner diameter): 7 mm ... 1600 mm
Temperature range
(pipe wall): -40 °C ... +240 °C

11
Stationary Transmitters

Liquids (F)
ATEX (IECEx) Zone 1, FM Class I, Div. 1 certified

FLUXUS® F809 The FLUXUS® F809 is an ATEX (IECEx) zone1 and FM Class I, div. 1 approved dual
(Liquids) channel liquid flow meter for any industrial environment. It can even be employed
at extreme temperatures ranging from -190 °C up to +600 °C.

Measurement uncertainty
(volumetric flow rate): ± 1% of reading ± 0.005 m/s
Transmitter:
Explosion protection: ATEX/IECEx zone 1, FM Class I /Div 1
Power supply: 100 ... 230 V AC / 50 ... 60 Hz, 24 V DC
Outputs: 4-20 mA active /passive, 4-20 mA HART active / passive,
4 - 20 mA HART passive intrinsic safety, pulse / frequency / binary
Inputs: –
136
243 285,5
70 Digital communication: Modbus RTU
Available transducers:
9

Explosion protection: ATEX/IECEx zone 1 / FM Class I / Div 1

156
314,6

Pipe size range

293,6

(inner diameter): 6 mm ... 6500 mm

Temperature range
(pipe wall): -40 °C ... +240 °C / WI: -200 °C ... +600 °C
FLUXUS® F801 The clamp-on ultrasonic liquid flow meters FLUXUS® F801 are, with their highly
(Liquids) corrosion resistant stainless steel enclosures, the ideal meters for usage offshore
(ATEX/IECEx Zone 1 certified).

Measurement uncertainty
(volumetric flow rate): ± 1% of reading ± 0.005 m/s
Transmitter:
Explosion protection: ATEX/IECEx zone 1
Power supply: 100 ... 230 V AC / 50 ... 60 Hz, 24 V DC
Outputs: 4-20 mA active /passive, 4-20 mA HART active / passive,
4 - 20 mA passive intrinsic safety, pulse / frequency / binary
Inputs: –
Digital communication: Modbus RTU
Available transducers:
189 195

Explosion protection: ATEX/IECEx zone 1

Ø 132
178

Pipe size range

(inner diameter): 6 mm ... 6500 mm
Temperature range
(pipe wall): -40 °C ... +240 °C / WI: -200 °C ... +600 °C
FLUXUS F808 ® The FLUXUS® F808 is an ATEX (IECEx) zone1 and FM Class I, div. 1 approved
(Liquids) single channel liquid flow meter. As special product variant „FLUXUS® F808LF“,
FLUXUS® F808LF it is engineered to measure extremely low flows.
(Liquids, low flow product
variant)
Product variant: FLUXUS® F808 FLUXUS® 808LF
Measurement uncertainty ± 1% of reading ± 0.005 m/s ± 1,2 % of reading ± 0,08/(N*ID) with N
(volumetric flow rate): = number of sound paths
(e.g. ± 1,2 % of reading ± 0,001 m/s
with ID = 10 mm, N = 8)
Transmitter:
Explosion protection: ATEX/IECEx zone 1
Power supply: 100 ... 230 V AC / 50 ... 60 Hz, 24 V DC
Outputs: 4-20 mA active / passive, 4-20 mA HART active / passive, pulse / frequency / binary
Inputs: –
9.57
Digital communication: Modbus RTU
5.35
Available transducers:
Explosion protection: ATEX/IECEx zone 1
Pipe size range
(inner diameter): 6 mm ... 6500 mm 10 mm ... 50 mm
Temperature range
(pipe wall): -40 °C ... +240 °C / WI: -200 °C ... +600 °C
12
 Stationary Transmitters

Gases (G)
ATEX (IECEx) Zone 1, FM Class I, Div. 1 certified

FLUXUS® G809 The FLUXUS® G809 is an ATEX (IECEx) zone1 and FM Class I, div. 1 approved dual
(Gases) channel gas flow meter for any industrial environment. It accurately and reliably
measures any gaseous medium.

Measurement uncertainty
(volumetric flow rate): ±1...3 % of reading ±0.005 m/s, depending on application
Transmitter:
Explosion protection: ATEX/IECEx zone 1, FM Class I /Div 1
Power supply: 100 ... 230 V AC / 50 ... 60 Hz, 24 V DC
Outputs: 4 - 20 mA active / passive, 4 - 20 mA HART active / passive,
4 - 20 mA HART passive intrinsic safety, pulse / frequency / binary
Inputs: –
136
243 285,5
70 Digital communication: Modbus RTU
Available transducers:
9

Explosion protection: ATEX/IECEx zone 1 / FM Class I / Div 1

156
314,6

Pipe size range

293,6

(inner diameter): 7 mm ... 1600 mm

Temperature range
(pipe wall): -40 °C ... +240 °C
FLUXUS® G801 The clamp-on ultrasonic gas flow meters FLUXUS® G801 are, with their highly
(Gases) corrosion resistant stainless steel enclosures, the ideal meters for usage offshore
(ATEX/IECEx Zone 1 certified).

Measurement uncertainty
(volumetric flow rate): ±1...3 % of reading ±0.005 m/s, depending on application
Transmitter:
Explosion protection: ATEX/IECEx zone 1
Power supply: 100 ... 230 V AC / 50 ... 60 Hz, 24 V DC
Outputs: 4 - 20 mA active / passive, 4 - 20 mA HART active / passive,
4 - 20 mA passive intrinsic safety, pulse / frequency / binary
Inputs: –
Digital communication: Modbus RTU
Available transducers:
189 195

Explosion protection: ATEX/IECEx zone 1

Ø 132
178

Pipe size range

(inner diameter): 7 mm ... 1600 mm
Temperature range
(pipe wall): -40 °C ... +240 °C

13
Clamp-On Ultrasonic Transducers

For the flow measurement of liquids

FLEXIM has developed two transducer technologies in order Shear wave Transducers
to ensure the highest possible measuring accuracy even in
Typ
challenging environments: shear wave transducers with a fo-
cused signal insertion for measuring liquids and Lamb wave FSG

transducers with a wide signal insertion into the medium for FSK
measuring the flow of gases. FSM
FSP
In order to guarantee measurements with long-term stability
FSQ
in harsh industrial environments, the transducers and cable
FSS
connections are made of stainless steel and are available in
explosion-proof designs. 5 10 50 100 500 1000 5000
Inner pipe diameter in mm
(no limitations by pipe wall thickness or pipe wall material)

Shear wave FSS FSQ FSP / FSM FSK FSG

transducers (also available
as metal-free
for liquids: product variant)

Techn. drawing:

Dimensions of standard 25 x 13 x 17 39 x 22 x 25.5 62.5 x 32 x 40.5 126.5 x 51 x 67.5 129.5 x 51 x 67

transducers
in mm (l x w x h):

Operating temp.: -30 °C ... +130 °C -40 °C ... +130 °C -40 °C ... +130 °C -40 °C ... +130 °C -40 °C ... +130 °C
(ext. temp. area): (-30 °C ... +200 °C) (-30 °C ... +200 °C)

Protection degree: IP65 IP65, IP67 optional IP65, IP68 optional IP65, IP68 optional IP65, IP68 optional

Hazardous area FM Class I, Div. 2 ATEX (IECEx) ATEX (IECEx) ATEX (IECEx) ATEX (IECEx)
approval: Zone 1 and 2 Zone 1 and 2 Zone 1 and 2 Zone 1 and 2
FM Class I, FM Class I, FM Class I, Div. 1/ 2 FM Class I, Div. 1 / 2
Div. 1 / 2 Div. 1 / 2

14
 Clamp-On Ultrasonic Transducers

For the flow measurement of gases

Lamb wave Transducers Shear wave Transducers*

Typ Typ
up to 35 mm > 11 mm Pipe
GLF Pipe wall thickness GSG wall thickness
GLG
GSK > 5 mm Pipe wall thickness
GLH
GLK GSM > 2 mm Pipe wall thickness
GLM
GSP > 1 mm Pipe wall thickness
GLP
GLQ GSQ > 0,6 mm Pipe wall thickness

5 10 50 100 500 1000 2000 5 10 50 100 500 1000 2000

Inner pipe diameter in mm Inner pipe diameter in mm
*Applications with pipe wall thicknesses that are not within the range
of Lamb wave transducers

Lamb wave transd. GLQ GLP / GLM GLH / GLK GLG GLF
Shear wave transd.* - GSP / GSM GSK GSG -
for gases:

Techn. drawing:

Dimensions of standard 42 x 22 x 25.5 74 x 32 x 40.5 128.5 x 51 x 67.5 128.5 x 51 x 67.5 163 x 54 x 91.3
transducers
in mm (l x w x h):

Operating temp.: -40 °C ... +170 °C -40 °C ... +170 °C -40 °C ... +170 °C -40 °C ... +170 °C -40 °C ... +170 °C

Protection degree: IP65, IP68 optional IP65, IP68 optional IP65, IP68 optional IP65, IP68 optional IP65

Hazardous area ATEX (IECEx) ATEX (IECEx) ATEX (IECEx) ATEX (IECEx) ATEX (IECEx)
approval: Zone 1 and 2 Zone 1 and 2 Zone 1 and 2 Zone 1 and 2 Zone 1 and 2
FM Class I, Div. 1 / 2 FM Class I, Div. 1 / 2 FM Class I, Div. 1 / 2 FM Class I, Div. 1 / 2 FM Class I, Div. 1 / 2

* dimensions and design are varying to the Lamb wave transducers 15

Transducer Mounting Fixtures

Whether for quick installations during temporary When the going gets tough
measurement or for permanent installations,
whether for large pipes or small tubes: FLEXIM FLEXIM invented the WaveInjector® for extreme tem-
offers the right transducer mounting fixture for peratures. The patented device separates the ultra-
every application. sonic transducers thermally from the pipe thereby
extending the application range of non-intrusive
VARIOFIX transducer systems offer the best stability: clamp-on ultrasonic technology to temperatures
the sturdy mounting devices permanently ensure from -190 °C to 600 °C.
the ultrasonic transducers are positioned precisely.
Sophisticated, constructive details guarantee constant- The WaveInjector® is a transducer mounting device and
ly high contact pressure even with high fluctuations in so much heat is radiated or absorbed via its metallic
temperature thereby ensuring long-term stable high coupling plates that the temperature of the transducer
signal quality. clamping fixture lies within the working range of the
ultrasonic transducers.
VARIOFIX L is the standard transducer mounting fixture
for permanent installation. VARIOFIX C provides opti- The WaveInjector® is also mounted on the out-
mum protection even under the harshest conditions: side of the pipe without having to open the pipeline.
below the stainless steel cover, the measuring point is Since it is a purely mechanical arrangement, the
permanently protected from external influences, from WaveInjector® can also be used in hazardous areas.
wind and weather as well as from mechanical damage.

For temporary
measurements

Portable Portable VARIOFIX Fastening Shoes (FS) Tension Belts

Mounting Fixtures: (Chains / Magnets) (Chains / Magnets)
Description: The portable VARIOFIX is the stan- The fastening shoes (FS) are used The tension belts are used for
dard mounting fixture for tempora- for temporary measurements with temporary measurements with K
ry measurements with M and K S, Q and M transducers. and larger transducers at big pipe
transducers. sizes.

Techn. drawing:

Material: Stainless Steel: 304 (1.4301), 301 Stainless Steel: 304 (1.4301), 301 Steel, powder coated and textile
(1.4310), 303 (1.4305) (1.4310), 303 (1.4305) tension belt
Dimensions 414 x 94 x 76 (40) 210 x 32 x 44 for S transducers -
in mm (l x b x h): 420 x 48 x 58 for Q
and M transducers

16
 Transducer Mounting Fixtures

For permanent
measurements

Mounting Fixture VARIOFIX L VARIOFIX C Block fastener

Description: The VARIOFIX L is FLEXIM‘s stan- The VARIOFIX C is FLEXIM‘s The block mounting fixture
dard transducer mounting fixture mounting fixture for especially is completely metal free and
and provides highest mechanical harsh and corrosive environments, designed for applications at
protection within all industrial e.g. offshore. flexible tubings, e.g. to be used
environments. in clean room environments.
Techn. drawing:

Material
Standard: Stainless Steel: 304 (1.4301), Stainless Steel: 304 (1.4301), Polypropylene (PP)
301 (1.4310) 301 (1.4310)
Option Offshore: Stainless Steel: 316 (1.4571), Stainless Steel: 316 (1.4571)
316L (1.4404), 17-7PH (1.4568)
Dimensions VLK: 423 x 90 x 93 VCK-Large: 560 x 122 x 102 For outer pipe diameters:
in mm (l x b x h): VLK opt. IP68: 443 x 94 x 105 VCK-Large opt. IP68: 560 x 126 x 102 3/8“, 1/2“, 3/4“, 1“, 1 1/4“
VLM: 309 x 57 x 63 VCK-Small: 410 x 122 x 102 (others on request)
VLQ: 247 x 43 x 47 VCK-Small opt. IP68: 410 x 126 x 102
VCM: 460 x 96 x 80
VCQ: 310 x 85 x 62

Mounting Fixture PermaFix WaveInjector® WaveInjector® Cryo

Description: The PermaFix fixture is designed The WaveInjector® is FLEXIM‘s The WaveInjector® Cryo (FLUXUS
for mounting of FM Class I, Div. mounting fixture for extreme pipe Cryo) is FLEXIM‘s mounting fix-
1 transducers and associated wall temperatures for as low as ture for pipe temperatures below
conduits. -190 °C up to +600 °C.
-40 °C down to -190 °C
Techn. Drawing:

Material: Stainless Steel: 304 (1.4301), Stainless Steel: 304 (1.4301) Stainless Steel: 304 (1.4301)
316 (1.4571) optional
Pipe size: - 40 mm ... 1000 mm 70 mm ... 1000 mm
Dimensions PFK: 410 x 90 x 73 WI-400K: l = 279 mm, h = 178 mm l = 2 x l + lcp (l = 273 mm)
in mm (l x w x h): PFM: 310 x 68 x 44 WI-400M, WI-400Q, WI-4001, WI- w = outer pipe diameter + 32 mm
4004: l = 243 mm, h = 170 mm h = outer pipe diameter + 570 mm

17
18
 PIOX ®
Process Analytics by means of Ultrasound and Refractometry

Product characteristics like concentration and density can be monitored continuously online using PIOX® process
analysers: non-intrusively with PIOX® S clamp-on ultrasonic systems and wetted with the PIOX® R process
refractometer.

PIOX® brings analytics into the process Process insight through transmitted light

Both the acoustic measuring method and optical trans- Refractometry – measurement of the refraction of
mitted light measurement basically involve velocities: light – is a long-established method for determining
PIOX® S ultrasonic systems measure the propagation the concentration, density or purity of liquid media.
velocity of sound in the medium – also non-intrusively Refraction results from the change in the propagation
and with the same clamp-on ultrasonic transducers as velocity of light as it passes from the medium to the
FLEXIM’s FLUXUS® flowmeter. measuring prism.

Due to the fact that density and volume flow are Unlike conventionally used lab instruments, the
measured simultaneously, PIOX® S ultrasonic systems PIOX® R process refractometer does not determine the
are particularly suitable for non-intrusively measuring refractive index indirectly via the critical angle of the total
mass flow rates – especially where any leakage risk reflection but directly measures the angle of refraction of
must absolutely be excluded. two monochromatic beams of light as they pass
through the sample stream. The patented differen-
tial measurement in the transmitted light method is
resistant to the formation of deposits and therefore
particularly reliable.

19
PIOX® S

Mass flow, density and concentration measurement

without media contact

Always on the safe side

PIOX® S transfers the practical advantages of clamp- Non-intrusive online analytics with PIOX® S is the
on ultrasonic technology to process analytical appli- method of choice when materials and processes
cations: since the transducers are simply mounted demand the highest levels of safety and reliability, e.g. in
on the – safe – outside of the pipeline, they are not the case of corrosive media like acids or alkalis or even
subject to any wear and tear by the medium flowing toxic compounds.
inside. As there is no need to open the pipe for in-
stallation, mounting and initial operation can usually
be done during ongoing operation. Non-intrusive
process analytics with PIOX® S proves to be just as
versatile and flexible as non-intrusive flow measure-
ment with FLUXUS®:

 For almost all pipe sizes and materials –

whether it’s steel, plastic, glass or special
materials with inline or outer coatings, in a
nominal size range of 6 mm to 6 m.
 For temperatures up to 400 °C
 For hazardous areas – transducers and
transmitters are available in ATEX, IEC and
FM-certified designs.

20
 PIOX® S and PIOX® ID

Mass flow, density and concentration measurement - PIOX® S

Media distinction - PIOX® ID

PIOX® S721 / PIOX® S can be used to determine the mass flow rate, density and concentration
PIOX® S721 SA of many chemical media in real-time by determination of the acoustic velocity
and internal offsetting of the medium temperature.
The product variant PIOX® S721 - SA is a derivative of PIOX® S and engineered
for concentration, density and mass flow measurmement of Sulphuric Acid at
80 to 100% conc.
Measurement uncertainty
(volumetric flow rate): ± 1% of reading ± 0.005 m/s
Transmitter: PIOX® S721 PIOX® S721 SA
Explosion protection: ATEX/IECEx Zone 2, FM Class I /Div 2 –
Power supply: 100 ... 230 V AC / 50 ... 60 Hz, 12 / 24 V DC
Outputs: 4 - 20 mA active / passive, pulse / frequency / binary

Inputs: Pt100 / Pt1000, 4 - 20 mA active /passive, binary

Digital communication: Modbus RTU/TCP, BACnet MSTP/IP, Profibus PA, Foundation Fieldbus

Available transducers:
287 70 Explosion protection: ATEX/IECEx Zone 1 / –
Zone 2 FM Class I / Div2
265 10
Ø 4.5

Pipe size range

200
163

(inner diameter): 6 mm ... 6500 mm DN25 - DN2000

Temperature range
(pipe wall): -40 °C ... +240 °C / WI: -200 °C ... +600 °C -40 °C ... +130 °C
PIOX S502 ID
® PIOX® ID is a stationary ultrasonic measurement system for the non-invasive
distinction of 2 fluids (standard version) or of one fluid from 5 fluids (extended
version) during tank filling or transfer. On the basis of reliable fluid distinction
by means of the PIOX® ID, misfuelling and thereby a hazardous mix-up of fluids
can be prevented.
Media Pairs: NaClO/HCl, NaClO/HNO3, NaClO/H2SO4, NaOH/HCl, NaOH/HNO3, NaOH/H2SO4,
H2SO4/HCl (others on request)
With the following concentrations:
NaClO (Sodium Hypochlorite) 12 ... 16%
NaOH (Sodium Hydroxide) 30 ... 50%
N2SO4 (Sulphuric Acid) 93 ... 100%
HCl (Hydrochloric Acid) 15 ... 37%
HNO3 (Nitric Acid) 50 ... 65%
Transmitter:
Explosion protection: –

ø8.4
Power supply: 100 ... 230 V AC / 50 ... 60 Hz, 24 V DC
Outputs: 4 - 20 mA active (status), binary (status)
71

83

Inputs: Pt100 / Pt1000

10

ø4.5

205
Digital communication: –
Available transducers:
Explosion protection: –
140
103

Pipe size range

220
(inner diameter): DN25 ... DN65
Temperature range
(pipe wall): -40 °C ... +100 °C

21
PIOX® R

Process analytics with the transmitted light refractometer

Laboratory accuracy in the process

Using PIOX® R, the well-tried transmitted light measurement as a laboratory practice is reliable in
the process. Measurement via the patented transmitted light method ensures maximum reliability.
Extremely high measuring accuracy is achieved by measuring the refraction of two monochromatic light beams
and evaluating the difference.

The PIOX® R comes in two versions, tailored to the requirements of various industries: the PIOX® R500-H for
applications where hygiene is particularly important, e.g. in the pharmaceutical, food and drinks industries as
well as the PIOX® R500-C for applications in the chemical industry. Both versions are available in various designs,
materials and with a variety of flange styles which cover a wide range of applications.

Our application engineers are eager to assist you.

PIOX® R500-H PIOX® R500-C

Process refractometer for hygienic applications Process refractometer for chemical applications

PIOX® R500-H was developed especially for appli- PIOX® R500-C was developed especially for applica-
cations which require the highest level of purity and tions in the chemical industry. The sophisticated design
hygiene. The sensor unit is characterised by its cavity- and high-quality materials ensure operational safety
free design which effectively prevents impurities from even ander challenging conditions, e.g. when mea-
accumulating. suring highly aggressive media as well as in potentially
explosive areas.

22
 PIOX® R

Process Refractometer for Chemical and Hygienic Applications

PIOX® R721/R500 The hygienic design of the PIOX® R721/R500 is the ideal process refractometer
Hygienic design for applications in the pharmaceutical and food & beverages industry.
The PIOX® R721/R500 offers maximum process reliability, the highest level of
precision and is resistant to deposit formation.

Measurement range: nD: 1.3 ... 1.7, °Brix: 0 ...100

Measurement uncertainty
(volumetric flow rate): nD: 0.0002 (corresponds to 0.1 °Brix, typical 0.1 wt%)
Transmitter (R721):

Explosion protection: ATEX/IECEx zone 2, FM Class I /Div 2

Power supply: 100 ... 230 V AC / 50 ... 60 Hz, 20 ... 32 V DC

Outputs: 4 - 20 mA active / passive, pulse / frequency / binary

Inputs: Pt100 / Pt1000, 4 - 20 mA active /passive / binary

Digital communication: Modbus RTU/TCP, BACnet MSTP/IP, Profibus PA, Foundation Fieldbus

Sensor (R500):

Explosion protection: ATEX (IECEx) zone 0, 1, 2

Temperature range: -20 °C ... +150 °C

Pressure range: PN 10

Process connection: Varivent (N) or Tri-Clamp 3" compatible process connections

PIOX® R721/R500 The chemical design of the PIOX® R721/R500 is the ideal process refractometer
Chemical design for applications in the chemical industry. Due to the special seal design and the
fact that the measuring head is separated from the transducer equipment, the
PIOX® R721/R500 ensures maximum process reliability even in the presence of
corrosive and toxic media.
Measurement range: nD: 1.3 ... 1.7, °Brix: 0 ...100

Measurement uncertainty
(volumetric flow rate): nD: 0.0002 (corresponds to 0.1 °Brix, typical 0.1 wt%)
Transmitter (R721):

Explosion protection: ATEX/IECEx zone 2, FM Class I /Div 2

Power supply: 100 ... 230 V AC / 50 ... 60 Hz, 20 ... 32 V DC

Outputs: 4 - 20 mA active / passive, pulse / frequency / binary

Inputs: Pt100 / Pt1000, 4 - 20 mA active /passive / binary

Digital communication: Modbus RTU/TCP, BACnet MSTP/IP, Profibus PA, Foundation Fieldbus

Sensor:

Explosion protection: ATEX (IECEx) zone 0, 1, 2

Temperature range: -20 °C ... +150 °C

Pressure range: PN 10, PN 16, PN 40 (on request, depending on process connection)

Process connection: DIN/ANSI flange, proprietary FLEXIM flow cell, standard sight glass fitting

23
In partnership
For almost three decades, FLEXIM has been leading the way nationally FLEXIM GmbH
and internationally for process instrumentation in many areas of Berlin, Germany
Phone: +49 30 93 66 76 60
industry. As a technology leader and pioneer in the field of non-intrusive info@flexim.de
clamp-on ultrasonic flow measurement of liquids and gases, FLEXIM
FLEXIM Austria GmbH
has repeatedly set standards. In addition to non-intrusive flow measure- Olbendorf, Austria
ment, innovative process analytical methods using ultrasound or Phone: +43 33 26 529 81
refractometry are another focal point of our program. office@flexim.at
FLEXIM Instruments Benelux B.V.
Permanently forward-looking Berkel en Rodenrijs, Netherlands
Phone: +31 10 24 92 333
We’re not resting on our laurels. Every year, we invest generously in benelux@flexim.com
research and development to further strengthen our position as a tech- FLEXIM France SAS
nological leader. Limonest, France
In addition to that, we maintain close contact with our customers. Tél. : +33 4 27 46 52 10
Innovative and reliable products that meet the requirements of end info@flexim.fr
users are the result. FLEXIM Instruments UK Ltd.
Northwich, UK
Phone: +44 1606 781 420
FLEXIM Measurement Services provides you with answers
sales@flexim.co.uk
In today’s energy efficient and environmentally conscious environment, FLEXIM Middle East
facility and plant metering must be verified and calibrated for accuracy Dubai, U.A.E.
Phone: +971 4430 5114
to meet audit and regulatory demands. This is especially true for energy salesme@flexim.com
intensive industries such as Power Generation, Oil & Gas, Chemical and
FLEXIM Instruments
Processing industries. Asia Pte Ltd.
We confirm and verify flow rates of existing volume and mass flow Singapore, Singapore
meters at your industry-specific application. Phone: +65 67 94 53 25
salessg@flexim.com
We also offer complete thermal energy measurements that can help FLEXIM Instruments China
you to evaluate the performance of your plant and processes. Shanghai, China
We provide formal reports and in-depth data by employing our trace- Phone: +86 21 64 95 75 20
shanghai@flexim.com
able calibrated portable meters along with sophisticated diagnostic
software. FLEXIM S.A
Santiago de Chile, Chile
Our products are hazardous area approved (ATEX (IECEx) Zone 2 (1) Phone: +56 22 32 03 62 80
and FM Class I, Div. 2) and provide measurements in even the most info@flexim.cl
11/2019 Subject to change without notification

demanding environments, e.g. Offshore Platforms, or Refineries at pipe FLEXIM AMERICAS Corporation
temperatures up to +600 °C and beyond. New York, USA
Phone: +1 63 14 92 23 00
salesus@flexim.com
FLEXIM Service and
Support Center South America
Esco Argentina S.A., Buenos Aires
Phone: +54 11 49 20 71 00
flexim@escoarg.com.ar
www.escoarg.com.ar

www.flexim.com
BUPRODUCTV3-1EN