ENERGIN® CHP
Combined Heat and Power units
ENERGIN® CHP units produce heat and electrical power at the same time. The heat recovery is from engine jacket water,
exhaust, lube oil and the first stage of mixture cooling.
The gas engines of the M-Series of R Schmitt Enertec are the base of the ENERGIN® CHP units in the range of 100 - 500 kW
electrical power. The engines are specially designed and manufactured by us for the operation with the following fuels:
Natural gas, biogas, LPG, woodgas and special gases. As an option they can be equipped with an absorption chiller for
cooling. With the additionally sound enclosure, that is mounted the common frame, the sound level can be reduced to less
than 70 dB(A). CHP are easy to install and save on space because all major components are mounted on the common frame
and are ready piped and cabled.
ENERGIN® type Engine type Electrical Electrical Thermal Overall Engine specification
power efficiency power efficiency
M06 CHP G100 M06-GN0W22 100 kW 34,6 % 166 kW 92,0 % Bore [mm] 128 [in line engines] 130 [V-engines]
natural gas
M06 CHP G122 M06-GN0W22 122 kW 35,1 % 198 kW 92,0 % Stroke [mm] 155 [in line engines] 142 [V-engines]
M08 CHP G151 M08-GN0W22 151 kW 36,0 % 235 kW 92,1 %
Speed [U/min] 1.500
M06 CHP G173 M06-GTIW22 173 kW 35,8 % 264 kW 90,5 %
M06 CHP G185 M06-GT2W22 185 kW 36,5 % 260 kW 87,8 % Mean piston [m/s] 7,75 [in line engines]
speed 7,1 [V-engine]
M06 CHP G205 M06-GT2D22 205 kW 37,5 % 266 kW 86,1 %
M08 CHP G220 M08-GTIW22 220 kW 37,3 % 314 kW 90,5 %
Applicable gas types G = natural gas
M08 CHP G233 M08-GT2W22 233 kW 37,7 % 309 kW 87,7 %
B = biogas
M08 CHP G260 M08-GT2D22 260 kW 37,8 % 332 kW 86,0 % H = woodgas and other low calorific gases
M12 CHP G334 M12-GTIW22 334 kW 36,6 % 496 kW 90,9 % P = propane and other high calorific gases
M12 CHP G350 M12-GT2W22 350 kW 38,1 % 458 kW 87,9 %
Aspiration N = natural
M12 CHP G400 M12-GT2D22 400 kW 38,5 % 498 kW 86,4 % T = turbocharged
M12 CHP G500 M12-GM2D21 500 kW 39,5 % 587 kW 85,8 % M = turbocharged with Miller Cycle
M06 CHP B115 M06-BT0W21 115 kW 37,0 % 153 kW 86,2 %
biogas
Mixture cooling 0 = none
M06 CHP B173 M06-BTIW22 173 kW 37,2 % 227 kW 86,0 % I = internal
M06 CHP B205 M06-BT2D22 205 kW 38,8 % 227 kW 81,8 % 2 = double stage internal / external
M08 CHP B233 M08-BT2W22 233 kW 38,1 % 278 kW 83,5 % Exhaust manifolds W = watercooled
M08 CHP B260 M08-BT2D22 260 kW 41,6 % 251 kW 81,8 % D = dry, insulated
M12 CHP B350 M12-BT2W22 350 kW 38,9 % 405 kW 83,9 %
M12 CHP B400 M12-BT2D22 400 kW 40,2 % 418 kW 82,2 % ENERGIN® type M06 M08 M12
M12 CHP B500 M12-BM2D21 500 kW 41,2 % 493 kW 81,7 % No. of cylinders / 6 in line 8 in V90° 12 in V90°
M08 CHP H166 M08-HT2D22 166 kW 33,1 % 255 kW 84,0 % configuration
woodgas
M12 CHP H250 M12-HT2D22 250 kW 33,5 % 376 kW 83,9 % capacity [ltr.] 12,0 15,1 22,6
CHP Basic scope of supply
Four stroke gas engine coupled with double bearing alternator, mounted on common frame ●
Sound attenuating enclosure with air ventilation mounted on common frame with engine and generator ○
Heat recovery from engine jacket water, exhaust, lube oil and 1 stage intercooler. st
●
Cooling the exhaust temperature to 120°C with natural gas and 180°C with biogas applications
Remote radiator for 2nd stage mixture cooling ○
Remote radiator for jacket water, lubrication oil, 1 stage intercooler and exhaust heat
st ○
ENERSCREEN® control system with touchpanel for engine, generator and auxiliaries set mounted in switchboard. ●
With synchronizing and generator protection functions
Generator circuit breaker set mounted in switchboard ●
Electric pre-lubrication pump with change over valve to use the pump for oil drainage and oil change ●
Set mounted lube oil make up tank with automatic level control on the engine oil pan ●
for automatic compensation of the oil consumption
Exhaust primary silencer set mounted in common frame ●
Exhaust secondary silencer for higher noise protection in loose supply ○
○ as an option ● included
FLY_CHP_Trios_052015_V_03_EN
© R Schmitt Enertec GmbH 05/2015
ENERGIN® and are registered trademarks of and licensed by GmbH. The use of other brands or trademarks contained in this document by
a third party may result in a violation of the rights of the holders of the license plate. Subject to errors and technical modifications excepted.
Represented in Tunisia by
R Schmitt Enertec GmbH Trios Energy
Siemensstraße 13 5080 Téboulba - Monastir
56743 Mendig - Germany trios.energy.suarl@gmail.com
www.rschmitt-enertec.com contact@trios-energy.com
info@rschmitt-enertec.com
