Introduction to Textile Fabric
Part 4: More Double
           Knit Structures
                    Dr. Jimmy Lam
            Institute of Textiles & Clothing
          The Hong Kong Polytechnic University
             Content
•   Half Milano and Full Milano Rib.
•   Half cardigan and full cardigan
•   Interlock fabric
•   Eight lock and 12-lcok
•   Ponte de Roma
•   Single Pique
                                                 1
                Milano Ribs
                Half Milano
•       There are two types of
        milano ribs, namely half
        milano and full milano.
•       Half Milano is two
        courses per repeat,
        with first course knits
        on all needles (front
        and back) and the
        second course on front
        needles only.
                Milano Ribs
                Half Milano
    •     Half milano is made up of 1 rib course
          and 1 plain course; with plain course
          always on the face side of the fabric.
    •     The resultant fabric is an unbalanced
          structure, with different appearance
          on both sides.
    •     Half milano is seldom knitted as piece
          goods, it is used for sweaters of
          coarser gauge (5 to 7 gauge V-bed
          machine with woollen or acrylic yarns)
                                                   2
          Milano Ribs
          Full Milano
•   Full milano has three
    courses per repeat;
    with one course of
    1x1 rib; one course of
    plain on one side of
    fabric and another
    course of plain on the
    other side.
•   Although full milano
    is slightly modified
    from half milano, the
    fabric property is
    entirely different
          Milano Ribs
          Full Milano
•   Full milano is normally knitted in higher
    density to give a firm fabric.
•   The two plain courses of full milano
    reduces most of the width way
    elasticity.
•   As a result, full milano is a fabric with
    much better dimensional stability.
•   Full milano is produced mainly on
    medium gauge machines as piece goods
    for suiting fabrics
                                                3
            Cardigans
          (Half Cardigan)
• The cardigans are the rib
  structures with tuck loops.
• The first type is the half
  cardigan or royal rib. This
  is a 2 courses per repeat,
  with one course of 1x1 rib
  and the other course of all
  needles knit one side and
  all needles tuck of the
  other side of the fabric.
            Half Cardigan
• Half cardigan is a wide fabric, the large amount
  of tuck loops reduce the side way contraction.
• If a 1x1 rib shrinks for 30% after relaxation
  on its width, then the half cardigan will shrink
  only about 8%.
• The structure is mainly produced on coarse
  gauge V-bed machines for fully fashion or cut
  and sewn pullovers or cardigans.
• Half cardigan is not a balanced structure; the
  number of courses per inch is different on
  both sides of the fabric.
                                                     4
         Full Cardigan
          (Polka Rib)
  • Full cardigan has the same appearance on
    both sides of the fabric (half cardigan
    has different appearance on both sides)
  • Although full cardigan is also two courses
    per repeat, it contains no rib course.
  • The structure has 50% tuck loops and
    50% knit loops.
         Full Cardigan
          (Polka Rib)
• The excessive tuck loops make the fabric
  bulk and heavy, therefore the structure
  is suitable for chunky knitwear.
• Full cardigan is normally knitted on 3-12
  gauge V-bed machines with wool or
  acrylic yarns,
                                                 5
      Interlock Category
• There are TWO type of
  needle arrangement in
  circular machine.
• When the needle heads are
  offset with each other, it is
  called rib gating e.g 1x1 rib,
  2x2 rib.
• If the needle heads are
  facing with each other, it is
  called interlock gating, eg.
  Interlock fabric
        Interlock fabric
• .
                                   6
          Interlock fabric
• Although interlock is derived from 1x1 rib
  structure, the fabric properties are not the same.
• Differences:
   –   It takes two knitting courses to form one repeat.
   –   Much higher in stitch density
   –   Lower in widthwise elasticity
   –   Fine and smooth surface texture
• Similar:
   – Perfectly balanced structure
   – Same appearance o both sides
   – Can only be unroved from the last course.
          Interlock fabric
• Interlock fabrics are mainly produced on specially
  designed circular double jersey machines called
  interlock machines.
• They are high speed, multi-feeders with closed
  cam track machines.
• The common gauges for interlock fabrics are 20-
  24 npi, using 1/30 Ne cotton or 1/48 Nm worsted
  yarns.
• Worsted interlock is for ladies’ winter suiting
  fabrics. For those 28 gauge fabrics, the yarns
  used are mainly texturised polyester of 75 denier.
                                                           7
     Modified Interlock
     eight-lock & 12-lock
• Both are modified from
  simple interlock fabric
• The fabric is called 8-lock
  because it takes eight
  needles to make one repeat
  of structure; and so is the
  12-lock.
• Both of these structures
  are not popular because of
  the fabric performance is
  not as good as plain
  interlock.
           Pont de Roma
• This is a 4 courses per
  repeat interlock type
  structure.
• It is composed of one
  interlock course and one
  tubular course.
• A plain interlock fabric
  has a smooth surface on
  both side; but when a
  tubular course is added,
  the fabric properties
  changes accordingly.
                                8
         Pont de Roma
• The tubular course reduces the
  widthwise elasticity.
• The fabric has better dimensional
  stability than interlock
           Discussion
• What is Interlock fabric?
• What is the different between
  interlock and rib fabric?