INSTRUCTIONS OF JDAS OPERATION

1 QUICK START ................................................................................................................ 1

1.1 INTRODUCTION................................................................................................... 1

1.2 FEATURES ............................................................................................................... 2

1.3 COMPATIBLE WITH THIRD PARTY ANALYSIS SOFTWARE ............................. 3

1.4 CONTACT US.......................................................................................................... 3

2 INSTALLATION.............................................................................................................. 4

2.1 OPERATING ENVIRONMENT ............................................................................... 4

2.2 INSTALL AND UNINSTALL ................................................................................... 4

2.3 SOFTWARE INTERFACE ........................................................................................ 5

3 ACQUISITION RECORD .............................................................................................. 10

3.1 START THE JDAS ................................................................................................. 10

3.2 CREATE A NEW JOB ............................................................................................ 11

3.3 USER SETUP ......................................................................................................... 12

3.4 CHANNEL SETTING ............................................................................................. 13

3.5 ACQUISITION RECORD ....................................................................................... 18

3.6 QUICK ADJUST .................................................................................................... 19

3.7 DATA TRANSMISSION........................................................................................ 20

4 DISPLAY AND PRINT ................................................................................................. 23

4.1 CURVE DISPLAY ................................................................................................... 23

4.2 DATA DISPLAY..................................................................................................... 45

4.3 CUSTOM DISPLAY ............................................................................................... 49

4.4 DATA QUERY........................................................................................................ 61

4.5 PRINT .................................................................................................................... 62

5 DATA CALIBRATION................................................................................................... 64

6 CURVE EDIT................................................................................................................. 66

6.1 CURVE EDIT .......................................................................................................... 66

6.2 BRUSH MODIFY ................................................................................................... 70

7 STAGE DESIGN............................................................................................................ 72

7.1 AUTOMATIC STAGE CONTROL .......................................................................... 72

7.2 MANUAL STAGE CONTROL ............................................................................... 75

7.3 STAGE STATISTICS .............................................................................................. 81

1 QUICK START

Thanks for choosing Jereh Data Acquisition System.

 Introduction

 Features

 Compatible With Third Party Analysis Software

 Contact Us

1.1 INTRODUCTION

JDAS is a data acquisition system developed on basis of Windows and it is used for

monitoring the operation data. This system can collect, monitor and record operation

data in real-time and it can also process related operation data, which helps field

technical personnel to accurately master job data, analyze job condition, direct field

job and guarantee job quality. This system also helps to find and analyze causes of

problems during job process.

JDAS supports:

a) Collect and record data in real time

b) The signals can be configurated freely and can be calculated in calculation

formula.

c) The curves and data can be displayed in split screen.

d) Edit and modify curve in real time

e) Compatible with third party analysis software such as FracproPT

CONTENT THE FIRST PAGE

Instructions of JDAS Operation 1

1.2 FEATURES

The JDAS software features:

a) Basic Functions:

 Convenient installation and operation

 Applicable Operating Systems: Windows XP, Windows Server 2003 and

Windows 7

 Collect signals of several channels through the data acquisition unit and the

contacts of the Ethernet

b) Data acquisition and save

 Free configuration of signals

 Real-time editing of the curves

 Real-time calibration of the data

 Collect data filtering and fine adjustment

 Shift between metric unit and imperial unit in real time

 Save data in several formats, such as *.txt and *.fpa

 MS Access database storage, convenient maintenance and storage

c) Display

 Set the curves in real time, such as its color, range and line width;

 Display data and curves in split screen clearly;

 Curves at any time can be displayed flexibly. The display range of the curves

can be adjusted freely during real-time acquisition and historical playback.

 Customize display: display of figures, data, instrument and curves can be set

freely.

CONTENT THE FIRST PAGE

2 Instructions of JDAS Operation

1.3 COMPATIBLE WITH THIRD PARTY ANALYSIS SOFTWARE

The JDAS system can supply real-time data to the third party analysis software (such as

FracproPT、Meyer) through port RS232.

CONTENT THE FIRST PAGE

1.4 CONTACT US

 Yantai Jereh Petroleum Equipment & Technologies Co., Ltd

Address: No. 9, Jereh road, Laishan District, Yantai, Shandong, China

P.C.: 264003

Web: www.jereh-pe.com

 After-sales

China: 400-812-9130

North America (USA and Canada): 281-860-0488

Overseas excluding North America: 400-816-2161

Fax: +86-535-672-3171

CONTENT THE FIRST PAGE

Instructions of JDAS Operation 3

2 INSTALLATION

 Operating Environment

 Installation and Upgrade

 Software Interface

2.1 OPERATING ENVIRONMENT

a) Hardware

In order to ensure stable system operations and accurate data record, it is

recommended to use PC with configurations no lower than:

 P IV 2.0 CPU;

 1G memory;

 60G hard disk space;

 Monitor with resolution of 1024×768

b) Operation System Requirements:

 Windows XP、Windows Server 2003、Windows 7

CONTENT THE FIRST PAGE

2.2 INSTALL AND UNINSTALL

a) Run JDAS-Setup.exe, and install this software according to the tips.

b) A desktop shortcut will be created automatically for convenient operation after

installation.

c) Run unins000.exe under the installation directory (default: C: \JDAS\) to un-install

the software.

4 Instructions of JDAS Operation

 CONTENT THE FIRST PAGE

2.3 SOFTWARE INTERFACE

Fig. 2-1

Item Description

A System color setting

B System Title Bar

C System Tool Bar

D Communication status/Job information

E Display Shift

F Real-time Curve

a) System Color

Click at left top corner of the interface, and select color in System ThemeColor.

Instructions of JDAS Operation 5

 Fig. 2-2

b) Tool Bar

Fig. 2-3

Item Description

Create a new job

Open job

Save data

Recycle

Start acquiring

Pause acquiring

Stop acquiring

Curve interface

Data interface

Custom interface

Stage interface

Data communication setting

Parameter setting

6 Instructions of JDAS Operation

 Date query

Date calibration

Interface lockup

Help

Exit

1) Chart, as shown in Fig. 2-4

Fig. 2-4

Item Description

1# Chart Display 1# chart

2# Chart Display 2# chart

3# Chart Display 3# chart

4# Chart Display 4# chart

5# Chart Display 5# chart

2) Data, as shown in Fig. 2-5

Fig. 2-5

Item Description

1# Data Display 1# data

2# Data Display 2# data

Instructions of JDAS Operation 7

 3# Data Display 3# data

4# Data Display 4# data

5# Data Display 5# data

3) Custom, as shown in Fig. 2-6

Fig. 2-6

Item Description

1# Custom Display 1# custom

2# Custom Display 2# custom

3# Custom Display 3# custom

4# Custom Display 4# custom

5# Custom Display 5# custom

4) Stage, as shown in Fig. 2-7

Fig. 2-7

Item Description

Stage Control Stage control mode-auto/manual

8 Instructions of JDAS Operation

 Stage Design Stage design

Stage Data Display stage data.

Stage Statistics Display stage statistics.

Auto Stage Notes Add stage notes automatic

5) Data Comm./Mobile, as shown in Fig. 2-8

Fig. 2-8

Item Description

Com Data Serial port data communication setting

Mobile Data Handheld terminal data communication setting

Remote Data Send data through TCP/IP remotely

6) Setting, as shown in Fig. 2-9

Fig. 2-9

Item Description

Com Serial port setting

Channel Channel setup

Set Zero Clear the data

Instructions of JDAS Operation 9

 Units Metric/imperial units setting

Language Language setting

User Setup User setup

Quick Adjust Adjust the data quickly

Clear Screen Clear Screen quickly

To Default Clean all manually adjusted value

CONTENT THE FIRST PAGE

3 ACQUISITION RECORD

This section will introduce the start, data acquisition and recording of JDAS. User can

adjust the data (chart editing, data fine adjustment) according to actual working

conditions and set chart display parameters.

 Start the JDAS

 Create a new job

 Set parameter

 Channel Setting

 Acquistion record

 Quick adjust

 Data communication

3.1 START THE JDAS

Double click the desktop shortcut of JDAS to enter the software main interface as

shown in Fig. 3-1.

10 Instructions of JDAS Operation

 Fig. 3-1

CONTENT THE FIRST PAGE

3.2 CREATE A NEW JOB

Click in the tool bar, and a New Job interface shown as Fig. 3-2 will pop up.

a) Input the name of the operation file.

b) Click to select the template (the template is under Template folder) to get the

configuration.

c) Click “OK” to finish creating a new job.

Instructions of JDAS Operation 11

 Fig. 3-2

CONTENT THE FIRST PAGE

3.3 USER SETUP

Click on the tool bar, and select “User Setup” in the drop-down list. A user

setup window shown as Fig. 3-3 will pop up.

Fig. 3-3

12 Instructions of JDAS Operation

 CONTENT THE FIRST PAGE

3.4 CHANNEL SETTING

Click on the tool bar, select “Channel” in the drop-down list. A channel setting

window as shown in Fig. 3-4 will pop up.

a) Left click on the tool bar and the data source setting window as shown in Fig.

3-5 will pop up;

b) Choose the data source needs to be added, left click on the tool bar to add

channel and input related parameters;

c) Left click on the toolbar to save the channel;

d) Choose channel from the vertical list on the left and click on the toolbar to

delete it;

e) Left click on the toolbar to clear the items in all controls except those under

the vertical list;

f) Left click on the toolbar to close the window.

Instructions of JDAS Operation 13

 Fig. 3-4

Item Description

Name Channel name

Precision Channel display precision (0~5)

Set the fluctuation value and then the value will fluctuate
Fluctuation
within this range.

Metric Unit Display metric unit

Imperial Unit Display imperial unit

Accumulated Accumulate the acquied value automatically.

Non Negative Non-negative value

14 Instructions of JDAS Operation

 Signal source. If it is selected, it indicates that the signals are
From Sensor
from the sensor, and sensor type shall be selected.

Click , a data source and formula setting window as

Data Source shown in Fig. 3-7 will pop up for selecting data source of each
channel.

Line display attribute, if it is selected, the line will be

Curve Visible
displayed.

Legend display attribute, if it is selected, the legend will be

Legend Visible
displayed.

Filter Line filter attribute. Select it and set the filter parameters.

Line Color Used to set the color of the line.

Line Width Used to display the line width.

Metric Slope, Metric The final metric data equals: original data×metric slope+
Offset metric offset.

Imperial Slope, The final imperial data equals: original data×imperial slope+
Imperial Offset imperial offset.

Offset-Adjust Offset value adjustment

Offset-Up Shortcut key for offset value increase

Offset-Down Shortcut key for offset value decrease

Slope-Adjust Slope value adjustment

Slope-Up Shortcut key for slope value increase

Slope-Down Shortcut key for slope value decrease

Instructions of JDAS Operation 15

 Fig. 3-5

Item Description

Name Data source name

Corresponding type of the data source (choose through the

Type
drop-down list or input manually)

Protocol Communication protocol of the data source

Address IP address (or serial port number) of the data source

TSAP Local Display the local TSAP of PLC-200.

TSAP Remote Display the remote TSAP of PLC-200.

If this key is selected, the data of this data source will be collected,
Used
otherwise, they will not be collected.

If the protocol is OPC, please click “Advanced” and then the

Advanced
OPC server setting window as shown in Fig. 3-6 will pop up.

16 Instructions of JDAS Operation

 Fig. 3-6

Fig. 3-7

Instructions of JDAS Operation 17

 NOTE

The metric slope, metric offset, imperial slop and imperial offset shall be corresponding

to the related conversion factors.

CONTENT THE FIRST PAGE

3.5 ACQUISITION RECORD

a) Click in the tool bar, the system will start to collecting signals and record

data;

b) If the signals and data need to be transferred to the third party analysis software

(such as FracproPT) through RS232, click on the tool bar, and select the

“COMM” in the drop-down list. A “Comm Setting” window as shown in Fig.

3-6 will pop up.

c) If the data needs to be transferred to the handheld terminal through the network,

please click on the tool bar and select “MOBILE”, then a “Send Channel

Setting” as shown in Fig. 3-8 will pop up.

d) If the data needs to be transmitted to the remote server through the network, left

click on the toolbar and choose “Remote Data” in the drop-down list and

a remote send data window as shown in Fig. 3-10 will pop up;

e) Click on the tool bar to pause the data collecting and recording. Click

18 Instructions of JDAS Operation

 to continue the data collecting and recording.

f) Click on the tool bar to stop the data collecting and recording to finish the

operation.

CONTENT THE FIRST PAGE

3.6 QUICK ADJUST

a) Left click on the toolbar and choose “Quick Adjust” in the drop-down list

and the quick adjust window as shown in Fig. 3-8 will pop up;

b) The data can be adjusted quickly through setting the scale, factor and set value;

c) Click “OK” to save the operation.

Fig. 3-8

CONTENT THE FIRST PAGE

Instructions of JDAS Operation 19

3.7 DATA TRANSMISSION

3.7.1 COMMUNICATION DATA

During data acquisition, if the data needs to be transferred to the third party analysis

software (FracproPT) through RS232, click on the tool bar to select “COMM”

in the drop-down list and then a setting window as shown in Fig. 3-9 will pop up.

a) Choose the data that needs to be sent in the data list and set their sending

sequence through and on the left of the window;

b) Choose proper communication port, data type (metric or APIEN), send interval

and protocol;

c) Click “Send” to save the setting and send the data;

d) Click “Save” to save the setting, but the data will not be sent.

Fig. 3-9

20 Instructions of JDAS Operation

 CONTENT THE FIRST PAGE

3.7.2 HANDLED TERMINAL

If the data needs to be transferred to the handheld terminal through the network,

please click on the tool bra and select “MOBILE”, then a “Send Channel

Setting” window as shown in Fig. 3-8 will pop up.

a) Choose the channel to be sent and set the sending sequence;

b) Choose the send interval, protocol and data type (metric or APIEN);

c) Click “Send” to send the data and save the setting.

Fig. 3-10

CONTENT THE FIRST PAGE

Instructions of JDAS Operation 21

3.7.3 REMOTE SEND DATA

During data acquisition, if the data needs to be transmitted to the remote server

through the network, left click on the toolbar and choose “Remote Data” in

the drop-down list. Then a remote send data window as shown in Fig. 3-11 will pop up.

a) Choose the data need to be sent and set their sequence through or

on the left of the window;

b) Set the IP address and remote port of the remote server;

c) Choose the send interval, protocol and data type (metric or APIEN);

d) Click “Send” to save the setting and send the data.

Fig. 3-11

CONTENT THE FIRST PAGE

22 Instructions of JDAS Operation

4 DISPLAY AND PRINT

This chapter mainly introduces the display, query and printing of JDAS curves and data.

Users can choose to display (including chart page, data page and customer’s page),

query and print the data selectively according to actual working requirements.

 Curve Display

 Data Display

 Custom Display

 Data Query

 Print

4.1 CURVE DISPLAY

Choose “Chart Page” in the main interface or click on the tool bar, and then

choose “1# Chart” in the drop-down list to enter the curve display window.

Click on the curve tool bar or right click the chart page, and choose “Curve

Property”, then a “Curve Property” window as shown in Fig. 4-1 will pop up.

Instructions of JDAS Operation 23

 Fig. 4-1

CONTENT THE FIRST PAGE

4.1.1 GENERAL SETTING

Fig. 4-2

24 Instructions of JDAS Operation

 Item Description

Color of the background and borderstyle of the gradient can be

Background
set here.

One of the currently existing configuration files can be imported

Config File as the configuration and the current configuration can also be
saved as configuration file as well.

CONTENT THE FIRST PAGE

4.1.2 CHANNEL SETTING

Fig. 4-3

Item Description

Name Display name of the lines.

X-Axis Name Display the name of the X-axis of the lines.

Y- Axis Name Display the name of the Y-axis of the lines.

Instructions of JDAS Operation 25

Line Style Set the line style.

Line Color Set the color of the lines.

Line Width Set the width of the lines.

Curve Visible If it is selected, the curve will be displayed.

Legend Visible If it is selected, the legend will be displayed.

Precision Set the display precision of the channel data.

CONTENT THE FIRST PAGE

4.1.3 TITLE SETTING

Fig. 4-4

Item Description

Name Input the name of the title.

Title Display the title.

Show If it is selected, the title will be displayed on the curves.

Font Set the font of the title.

26 Instructions of JDAS Operation

 Font Color Set the font color of the title.

Alignment Set the alignment of the title.

Margin Set the margin of the title.

Add & Delete Add and delete the title.

CONTENT THE FIRST PAGE

4.1.4 LEGEND SETTING

a) Basic Setting

Fig. 4-5

Item Description

If it is selected, the background color of the legend will become

Transparent
transparent.

If the back color is not transparent, then the back color of the
Back Color
legend display section will be the set color.
Selected Item The back color of the channel when it is selected.
Back Color
Instructions of JDAS Operation 27
Show Legend If it is selected, the legend will be shown.

If it is selected, the real-time value of each channel will be

Show Value
displayed.

Legend Width Set the width of the color-area.

Legend Height Set the height of the color-area.

Custom Color: set custom color; Curve Color: same with curve
Color Style
color.

Legend Font Set the font of the channel name in the legend.

Legend Font Color Set the font color of the channel name in the legend.

Value Font Set the font of the real-time data in the legend.

Value Font Color Set the font color of the real-time data in the legend.

b) Legend Layout

Fig. 4-6

28 Instructions of JDAS Operation

 Item Description

Auto Count System set the legend layout automatically.

Cols Set columns of the legend.

Rows Set rows of the legend.

Col Spacing Set the column spacing.

Row Spacing Set the row spacing.

Margin Set the margin of the legend (top, bottom, left and right).

CONTENT THE FIRST PAGE

4.1.5 X-AXES SETTING

a) Basic Setting

Fig. 4-7

Instructions of JDAS Operation 29

 Item Description

Name Display the name of X-axis.

Increment Set the automatic increment of X-Axis.

Display Mode Total Time/Date Time/Both

Time Span Set the time span of the X-Axis.

Time Format Set the time format of the X-Aixs.

If it is selected, the X-Axis (including axes, scale, label and title)

Show
will be displayed.

Orign Time Set the minimum value of the X-Axis.

b) Title Setting

Fig. 4-8

Item Description

Title Display the title of X-Axis.

Font Set the font of X-Axis title.

Font Color Set the font color of X-Axis title.

30 Instructions of JDAS Operation

 Rotation Set the rotation of the X-Axis title.

Show If it is selected, the title of the X-Axis will be displayed.

Margin Set the margin between the X-Axis title and label.

c) X-Axes Setting

Fig. 4-9

Item Description

Font Set the font of the X-Axes label.

Font Color Set the font color of the X-Axes label.

Rotation Set the rotation of the X-Axes label.

Show If it is selected, the label of X-Axes will be displayed.

Margin Set the margin between the label and the axis.

d) Scale Setting

Instructions of JDAS Operation 31

 Fig. 4-10

Item Description

Major Count Set the quantity of the X-Axes major count.

Minor Count Set the quantity of the X-Axes minor count.

Major Length Set the length of the X-Axes major count.

Minor Length Set the length of the X-Axes minor count.

Style Set the display style of X-Axes.

Color Set the color of the X-Axes.

Width Set the width of the X-Axes.

Apply the setting of the major count and minor count to all
Scales Apply to All
X-Axes.

Show If it is selected, the X-Axes will be displayed.

CONTENT THE FIRST PAGE

32 Instructions of JDAS Operation

4.1.6 Y-AXES SETTING

a) Basic Setting

Fig. 4-11

Item Description

Name Display the name of the Y-Axis.

If it is selected, the Y-Axis (including axes, scale, label and title)

Show
will be displayed.

Precision Set the display precision of the Y-Axes Data.

Increment Set the automatic increment of the Y-Axes.

Minimum Set the minimum value of the Y-Axes.

Maximum Set the maximum value of the Y-Axes.

Instructions of JDAS Operation 33

b) Title Setting

Fig. 4-12

Item Description

Title Display the title of Y-Axis.

Font Set the font of Y-Axis title.

Font Color Set the font color of Y-Axis title.

Rotation Set the rotation of the Y-Axis title.

Show If it is selected, the title of the Y-Axis will be displayed.

Margin Set the margin between the Y-Axis title and label.

c) Label Setting

34 Instructions of JDAS Operation

 Fig. 4-13

Item Description

Font Set the font of the Y-Axes label.

Font Color Set the font color of the Y-Axes label.

Rotation Set the rotation of the Y-Axes label.

Show If it is selected, the label of Y-Axes will be displayed.

Margin Set the margin between the label and the axis.

d) Scale Setting

Instructions of JDAS Operation 35

 Fig. 4-14

Item Description

Major Count Set the quantity of the Y-Axes major count.

Minor Count Set the quantity of the Y-Axes minor count.

Major Length Set the length of the Y-Axes major count.

Minor Length Set the length of the Y-Axes minor count.

Style Set the display style of Y-Axes.

Color Set the color of the Y-Axes.

Width Set the width of the Y-Axes.

Scales Apply to Apply the setting of the major count and minor count to all
All Y-Axes.

Show If it is selected, the Y-Axes will be displayed.

CONTENT THE FIRST PAGE

36 Instructions of JDAS Operation

4.1.7 NOTE

Fig. 4-15

Item Description

Style Note style: Point/Line

Position-X Note the position of the X-ordinate in the curve window.

Position-Y Note the position of the Y-ordinate in the curve window.

Channel Note corresponding channel

If it is selected, the note will be visible; otherwise, it will be

Visible
invisible.

Content Note the content

CONTENT THE FIRST PAGE

Instructions of JDAS Operation 37

4.1.8 LOGO SETTING

Fig. 4-15

Item Description

Path Set the path of the logo.

Width Set the width of the logo.

Height Set the height of the logo.

Position Choose the position of the Logo.

X-ordinate Set the position of the logo on the screen accurately.

Y-ordinate Set the position of the logo on the screen accurately.

Show If it is selected, the Logo will be displayed at the curves.

CONTENT THE FIRST PAGE

38 Instructions of JDAS Operation

4.1.9 GRID SETTING

a) Basic Setting

Custom set the background color of the grid

Fig. 4-16

b) Grid Setting

Instructions of JDAS Operation 39

 Fig. 4-17

Item Description

X-Axis Name Set the name of the X-axis that corresponds to the grid.

Y- Axis Name Set the name of the Y-axis that corresponds to the grid.

Width Set the width of the grid line.

Color Set the color of the grid line.

Style Set the style of the grid line.

Show If it is selected, the grid line will be displayed.

CONTENT THE FIRST PAGE

40 Instructions of JDAS Operation

4.1.10 TOOLBAR SETTING

a) Basic Setting

Fig. 4-18

Item Description

Show If it is selected, the toolbar will be displayed.

Item Description

Disabled If it is selected, the toolbar will be disabled.

Small Icon If it is selected, the toolbar will be displayed in small icon.

Back Color Choose the back color of the toolbar.

Gradient If it is selected, the background of the toolbar will get gradient.

Gradient Type Choose the gradient type of the toolbar background.

Gradient Angle Choose the gradient angle of the toolbar background.

Start Color Choose the gradient start color of the toolbar background.

End Color Choose the gradient end color of the toolbar background.

Instructions of JDAS Operation 41

b) Show Button

If it is selected, corresponding buttons in the toolbar will be displayed.

Fig. 4-19

Item Description

Reset. When the ordinates change, press it to reset quickly.

Zoom out. The curves will be zoomed out.

Zoom in. The curves will be zoomed in.

Zoom. Move the mouse to achieve the operation.

Cursor. When it is selected, the value of the cursor position will be

displayed.

Edit. When it is selected, the cursor will turn to a bush, and then
the selected channel can be edited in real-time.

Property, used to set the curve display property.

Save, used to save the curve figures.

Print, used to print the curves.

Curve Edit Modify, insert or delete the curves.

CONTENT THE FIRST PAGE

42 Instructions of JDAS Operation

4.1.11 RIGHT CLICK MENU

Right click at the curve display section, a shortcut menu as shown in Fig. 4-20 will pop

up.

Fig. 4-20

Item Description

If it is selected, the curves will be displayed totally, otherwise,

Auto Adaption
they will be displayed partially.

Update Range Update the range of the ordinates.

Curve Property Set the properties of the curves.

CONTENT THE FIRST PAGE

Instructions of JDAS Operation 43

4.1.12 DISPLAY IN SPLIT SCREEN

The JDAS system supports split screen display. The users can display the curves of

certain channels on the customer’s screen according to actual working requirements.

a) Start the JDAS system;

b) Collect and record data or playback the historical data;

c) Click on the toolbar, choose “#1 Chart (1#~5#)” in the drop-down list,

and a window as shown in Fig. 4-21 will pop up.

d) Set the properties of the curves.

e) Drag the curve to the customer’s screen for displaying.

Fig. 4-21

CONTENT THE FIRST PAGE

44 Instructions of JDAS Operation

4.2 DATA DISPLAY

Choose “Data page” in the main window or click on the toolbar, and choose

“1# Data Screen (1#~5#)” in the drop-down list to enter the data screen window.

Right click the data screen window, a set window as shown in Fig. 4-22 will pop up.

Fig. 4-22

Item Description

Setting Set corresponding channel.

Import Choose the existed configuration file and import it.

Save As Save the current window as configuration file.

Property Set the properties of the data window.

CONTENT THE FIRST PAGE

Instructions of JDAS Operation 45

4.2.1 CHANNEL SETTING

Right click the data screen, and choose “Setting” in the pop-up menu. A datascreen

setting window as shown in Fig. 4-23 will pop up, and related channel, font and

background can be set here.

Fig. 4-23

Item Description

Select Channel Set corresponding channel.

Title Display the name of the selected channel on the data screen.

Title Setting Set the title font/color/alignment/backcolor of the data screen.

Display Setting Set the value font/color/alignment/backcolor of the data screen.

46 Instructions of JDAS Operation

 Apply the font and value settings to all displayed channels of the
Apply to all
current data screen.

CONTENT THE FIRST PAGE

4.2.2 DATASCREEN PROPERTY

Right click the data screen, and choose “Property” in the pop-up window. A window

as shown in Fig. 4-24 will pop up and channel quantity (columns, rows) and margin can

be set here.

Fig. 4-24

Item Description

Cols Set the column quantity of the data screen.

Rows Set the row quantity of the data screen.

Col Spacing Set the column spacing of the data screen.

Row Spacing Set the row spacing of the data screen.

Margin Set the margin of the data screen (top, bottom, left and right).

CONTENT THE FIRST PAGE

Instructions of JDAS Operation 47

4.2.3 DISPLAY IN SPLIT SCREEN

The JDAS system supports split screen display. The users can display the data (detailed

data or basic data) of certain channels on the customer’s screen according to actual

working requirements (the display can be updated in real-time).

a) Start the JDAS system;

b) Collect and record data or playback the historical data;

c) Click on the toolbar, choose “#1 Datascreen (1#~5#)” in the drop-down

list, and a window as shown in Fig. 4-25 will pop up.

d) Drag the data to the customer’s screen for displaying.

Fig. 4-25

CONTENT THE FIRST PAGE

48 Instructions of JDAS Operation

4.3 CUSTOM DISPLAY

Choose “Custom Page” in the main interface to enter the window as shown in Fig.

4-26. Right click the window, and a set-up window as shown in Fig. 4-27 will pop up.

Fig. 4-26

Instructions of JDAS Operation 49

 Fig. 4-27

Item Description

Edit Choose it to enter the editing status.

Import Choose the existed configuration file and import it.

Save Save the configuration of the current window.

Save As Save the current window configuration as configuration file.

Cancel Cancel the unsaved setting.

CONTENT THE FIRST PAGE

50 Instructions of JDAS Operation

4.3.1 CUSTOM DESIGN

Right click the custom window and choose “Edit” in the pop-up window to enter the

custom design status as shown in Fig. 4-28. Pictures, gauge, labels and curve controls

can be added freely here and the layout can be set freely.

a) Choose the controls (label, gauge, curve and picture) that need to be added in the

left list;

b) Drag it by the cursor to the right window to proper size;

c) Set related properties of the controls.

d) Right click the window, and choose “Save” in the pop-up menu after setting.

Fig. 4-28

Instructions of JDAS Operation 51

 Item Description

Label Display the title or the real-time data.

Gauge Gauge display.

Chart Chart display.

Picture Picture display.

a) Picture Property

Double click “Picture”control that on the right side of the window, a picture

selection window will pop up, and the user can choose the proper picture here.

b) Label Property

Double click “Label” and a label setting window as shown in Fig. 4-29 will pop up.

52 Instructions of JDAS Operation

 Fig. 4-29

Item Description

Select Channel Set corresponding channel.

Title Display the name of the selected channel on the data screen.

Title Setting Set the title font/color/alignment/backcolor of the data screen .

Display Setting Set the value font/color/alignment/backcolor of the data screen.

Apply the font and value settings to all displayed channels of the
Apply to all
current data screen.

c) Gauge Property

Double click “Gauge” and a gauge setting window as shown in Fig. 4-30 will pop up.

Instructions of JDAS Operation 53

 1) Gauge General

Fig. 4-30

Item Description

Select Channel Set the channel displayed on the gauge.

Transparent, If it is selected, the back color of the label will be transparent;

BackColor otherwise, the color will be the set color.

Frame Type Set the type of the gauge frame.

Frame Setting Set the glass effect, back color and frame color of the gauge.

2) Gauge Item Setting

 Title

54 Instructions of JDAS Operation

 Fig. 4-31

Item Description

Visible If it is selected, the title will be displayed on the gauge.

Font Set the title font.

Font Color Set the title color.

Name Set the title name.

Location Set the location of the title in the gauge.

Size Set the size of the title.

Instructions of JDAS Operation 55

  Unit Setting

Fig. 4-32

Item Description

Visible If it is selected, the unit will be displayed on the gauge.

Font Set the font of the unit.

Font Color Set the color of the unit.

Name Set the name of the unit.

Location Set the location of the unit in the gauge.

Size Set the size of the unit.

56 Instructions of JDAS Operation

  Number Setting

Fig. 4-33

Item Description

Visible If it is selected, the number will be displayed on the gauge.

Digit Color Set the color of the integer of the data.

Decimal Color Set the color of decimal of the data.

Font Set the font of the data.

Digital Num Set the digital number (decimal point is not included).

Decimal Num Set the decimal digits of the data.

Location Set the location of the data in the gauge.

Size Set the size of the data.

Instructions of JDAS Operation 57

 3) Gauge Scale

 General Setting

Fig. 4-34

Item Description

Start Angle Set the start angle of the gauge range.

Span Angle Set the span angle of the gauge range.

Max. Value Set the maximum value of the gauge range.

Min. Value Set the minimum value of the gauge range.

Major Interval Set the major interval of the gauge range.

Minor Interval Set the minor interval of the gauge range.

58 Instructions of JDAS Operation

 Item Description

Width Set the back width of the gauge range.

Visible If it is selected, the gauge range label will be displayed.

Font Set the font of the gauge range label.

Font Color Set the color of the gauge range label.

 Pointer Setting

Fig. 4-35

Item Description

Visible If it is selected, the gauge pointer will be displayed.

Pointer Length Set the length of the gauge pointer.

Instructions of JDAS Operation 59

Pointer Width Set the width of the gauge pointer.

Border Color Set the frame color of the gauge pointer.

Border Width Set the frame width of the gauge pointer.

Fill Color Set the internal fill color of the gauge pointer.

 Section Setting

Fig. 4-36

Item Description

Start Value Set the start value of the section.

End Value Set the end value of the section.

Fill Color Set the back color of the section.

Visible If it is selected, the back color of the section will be displayed.

60 Instructions of JDAS Operation

 CONTENT THE FIRST PAGE

4.4 DATA QUERY

Click on the toolbar, a data query window as shown in Fig. 4-36 will pop up.

a) Input query terms;

b) Click “Query” and the results will be displayed in the list;

c) Click “Setting”, a data query setting window as shown in Fig. 4-37 will pop up.

The name of the channels that needed to be queried can be set here.

d) Click “Export” and choose “Current Value” or “Raw Value” to export the

query results to files with format of txt, fpa, csv or xlsx.

Fig. 4-37

Instructions of JDAS Operation 61

 Fig. 4-38

CONTENT THE FIRST PAGE

4.5 PRINT

The JDAS supports three printing modes:

 Print All-print all curves to a single page;

 Page Print-input page numbers that needed and the curves will be displayed on

those pages;

 Part Print-print curves within a certain period.

a) Click on the curve’s toolbar, a print curve window as shown in Fig. 4-39 will

62 Instructions of JDAS Operation

 pop up.

b) Choose print mode, direction and set related parameters.

c) Click “ Preview” to preview the curves need to be printed in the window.

d) Click “Print” to print the curves directly.

Fig. 4-39

CONTENT THE FIRST PAGE

Instructions of JDAS Operation 63

5 DATA CALIBRATION

The JDAS system can collect data (analog quantity such as pressure and digital

quantity such as displacement) directly from the sensors, and it will calibrate the data

and save the calibrated data.

a) Start the JDAS;

b) Create job and set the channels;

c) Left click on the toolbar and the calibration window as shown in Fig. 5-1 will

pop up;

d) Choose the semaphore that need to be calibrated from the list on the left of the

window;

e) Set the offset value and do zero calibration;

f) The parameters can be added or deleted through the right click menu in the list;

g) Click “OK” to save the calibration parameters.

64 Instructions of JDAS Operation

 Fig. 5-1

CONTENT THE FIRST PAGE

Instructions of JDAS Operation 65

6 CURVE EDIT

JDAS system has function of curve editing (insert, modify and cut) and it offers two

curve editing modes (curve editing and brush modifying) to adjust the curves.

 Curve Edit

 Brush Modify

6.1 CURVE EDIT

The curve editing mode has functions of curve inserting, modifying (fixed value and

average value) and cut.

a) Start JDAS;

b) Collect and record data or playback the historical data;

c) Click on the curve toolbar, select “Curve Edit” in the dropdown list, and

then a curve edit window as shown in Fig. 6-1 will pop up.

66 Instructions of JDAS Operation

 Fig. 6-1

CONTENT THE FIRST PAGE

6.1.1 CURVE MODIFY

a) Choose the channel needs to be modified;

b) Input the basic information (start and end) of the curve that needs to be modified.

c) Select start, and double click the curve start that you want to modify on the curve

window, then the software will acquire and display the starting time automatically

(the way to determine the end is same with that of determining the start).

d) Update Parameter:

 Average Value-all value in the selected section of the chosen channel will be

modified to the average value of this section;

Instructions of JDAS Operation 67

  Fixed Value-all value in the selected section of the chosen channel will be

modified to the input value.

 Increase: All data within the selected time range will be increased by certain

input value;

 Decrease: All data within the selected time range will be decreased by certain

input value;

e) Click “OK” to finish the curve modification operation.

CONTENT THE FIRST PAGE

6.1.2 CURVE INSERT

a) Input the time point where the curve will be inserted;

Choose a proper position, and double click the curve insert point that needs to be

modified, then the software will acquire and display the insert time automatically.

b) Select data time direction:

 Before-all data time before the insert point will be led forward.

 After- all data time before the insert point will be led backward.

c) Input the time length that inserted.

d) Input the insert value (the default value is 0) and fluctuation of each channel.

e) Click “OK” to finish curve insert operation.

68 Instructions of JDAS Operation

 Fig. 6-2

CONTENT THE FIRST PAGE

6.1.3 CURVE CUT

a) Input the time point that needs inserting a curve;

Choose insert position, and double click the curve insert point that needs to be

modified, then the software will acquire and display the insert time automatically.

b) Input the start and end of the curves that need to be cut;

Select start, and double click the curve start that you want to modify on the curve

window, then the software will acquire and display the starting time automatically

(the way to determine the end is same with that of determining the start).

c) Select data time direction:

Instructions of JDAS Operation 69

  Before-all data time before the insert point will be led to forward backward.

 After- all data time before the insert point will be led to forward.

d) Click “OK” to finish the curve cut operation.

Fig. 6-3

CONTENT THE FIRST PAGE

6.2 BRUSH MODIFY

JDAS provides an easier way to modify the curves, that is brush modify.

a) Start the JDAS;

b) Collect and record data or playback the historical data;

c) Click on the toolbar, the cursor will turn to brush as shown in Fig. 6-4.

d) Choose the channel needs to be modified in the legend;

70 Instructions of JDAS Operation

e) Click to move the brush, the curves will be modified as the brush moves;

f) Click or on the toolbar to repeal or save;

g) Click on the toolbar again and the cursor will return to normal.

Fig. 6-4

CONTENT THE FIRST PAGE

Instructions of JDAS Operation 71

7 STAGE DESIGN

JDAS supports auto/manual design stage and it can save the stage data automatically.

The operators can check and direct the real-time operation through the stage window.

 Automatic Stage Control

 Manual Stage Control

 Stage Data Statistics

7.1 AUTOMATIC STAGE CONTROL

Click in the tool bar, select “Stage Control” in the drop-down list and then

select automatic control mode.

CONTENT THE FIRST PAGE

7.1.1 AUTOMATIC STAGE DATA

Click in the tool bar, select “Stage Data” in the drop-down list. The main

window will display stage data as shown in Fig. 7-1.

72 Instructions of JDAS Operation

 Fig. 7-1

Item Description

Stage channel setting as shown in Fig. 7-2.

Select title of the table to delete corresponding channel.

Import the stage data to EXCEL.

Stage window setting as shown in Fig. 7-3.

Clear the table data.

Quit the stage data window.

Instructions of JDAS Operation 73

 Fig. 7-2

Item Description

Select Stage No. Set corresponding channel of the stage number.

Select Channel Select stage display channel.

Fig. 7-3

Item Description

Header Font Used to set the header font.

Header Color Used to set the header color.

74 Instructions of JDAS Operation

 Cell Font Used to set the cell font.

Cell Color Used to set the cell color.

Header Align Used to set the header align way.

Header Height Used to set the height of the header.

Cell Align Used to set the cell align way.

Cell Height Used to set the height of the cell.

CONTENT THE FIRST PAGE

7.2 MANUAL STAGE CONTROL

Click in the tool bar, and select “Stage Control” in the drop-down list, and

choose the manual stage control mode.

CONTENT THE FIRST PAGE

7.2.1 MANUAL STAGE DESIGN

Click on the toolbar, select “Stage Design” in the drop-down list. A stage

design window as shown in Fig. 7-4 will pop up.

a) Click on the toolbar and a stage signal setting window as shown in Fig. 7-5

will pop up. Channels needed to be displayed can be set;

b) Set stage quantity in “Stage Number”;

c) Input stage name and value of related channels in the window;

d) Click on the toolbar to save the stage data;

e) Click on the toolbar to close the window.

Instructions of JDAS Operation 75

 Fig. 7-4

Fig. 7-5

Item Description

Select Channel Select channel that corresponds to the stage signal.

Auto Reset Zero When the stage is shifted, the data will be cleared automatically.

76 Instructions of JDAS Operation

 CONTENT THE FIRST PAGE

7.2.2 MANUAL STAGE DATA

Click on the toolbar and a stage display window as shown in Fig. 7-6 will pop up.

Fig. 7-6

Right click the stage display window and a setting menu as shown in Fig. 7-7 will pop

up.

Instructions of JDAS Operation 77

 Fig. 7-7

Item Description

Next Stage The system will display the next stage.

Select Stage Select the stage that needs to be entered.

Setting Set stage signals.

Import Select the existed configuration file and import it.

Save As Save the setting of the current window as configuration file.

Property Set the property of the window layout.

CONTENT THE FIRST PAGE

78 Instructions of JDAS Operation

7.2.3 SIGNAL SETTING

Right click the stage window, and select “Setting” in the pop-up window, then a

window as shown in Fig. 7-8 will pop up. Corresponding stage signal, font and back

color can be set here.

Fig. 7-8

Item Description

Select Channel Set corresponding stage signal.

Title Display title of the stage window.

Title Setting Set the title font/color/alignment/backcolor of the stage window.

Display Setting Set the value font/color/alignment/backcolor of the stage window.

Instructions of JDAS Operation 79

 Apply the font and value settings to all displayed stage signals in
Apply to all
the windows of current stage.

CONTENT THE FIRST PAGE

7.2.4 SCREEN LAYOUT

Right click the stage screen, and select “Property” in the pop-up menu. A screen as

shown in Fig. 7-9 will pop up and the display layout can be set here.

Fig. 7-9

Item Description

Rows Set the rows that displayed in the stage screen.

Cols Set the columns that displayed in the stage screen.

Row Spacing Set the row spacing that displayed in the stage screen.

Col Spacing Set the column spacing that displayed in the stage screen.

Margin Set the margin (top, bottom, left and right) of the stage screen.

CONTENT THE FIRST PAGE

80 Instructions of JDAS Operation

7.3 STAGE STATISTICS

Click in the toolbar, select “Stage Statistics”, and a window as shown in Fig.

7-10 will pop up.

Fig. 7-10

Right click the window, a setting window as shown in Fig. 7-11 will pop up.

Instructions of JDAS Operation 81

 Fig. 7-11

Item Description

Print Print the statistics chart.

Property Set the property of the statistics chart.

Export Data Export the stage statistics data to xls file.

Save Image Save the statistics chart to figure.

CONTENT THE FIRST PAGE

82 Instructions of JDAS Operation

7.3.1 STAGE CHART SETTING

Right click on the stage statistics window, click “Property” to enter the stage chart

setting window as shown in Fig 7-12 and Fig. 7-13.

Fig. 7-12

Item Description

Chart Type Set the chart type.

Title Content Set the chart title content.

Title Font Set the font of chart title.

Title Align Set the align way of the chart title.

Title Dock Set the dock of the chart title.

Font Color Set the font color of the chart title.

Maximum Set the maximum value of Y-Axis.

Instructions of JDAS Operation 83

Minimum Set the minimum value of Y-Axis.

Interval Set the interval value of Y-Axis.

Fig. 7-13

Item Description

Title Content Set the title content of X-Axis.

Title Font Set the title font of X-Axis.

Title Align Set the align way of X-Axis title.

Font Color Set the font color of X-Axis.

Title Content Set the title content of Y-Axis.

Title Font Set the title font of Y-Axis.

Title Align Set the align way of Y-Axis title.

Font Color Set the font color of Y-Axis.

Used3D If it is selected, the chart will be displayed in 3D view.

CONTENT THE FIRST PAGE

84 Instructions of JDAS Operation