Scribd
Upload
142 views1 page

Marathon: Technical Data Sheet

This technical data sheet provides information on Marathon, a two-component polyamine cured epoxy coating. It is a high solids, high build coating reinforced with glass flake. It is suitable for environments with high corrosivity, including as a primer, mid coat, or finish coat for carbon steel and concrete in atmospheric or immersed environments. It has approvals for various industry standards and is intended for use in marine and protective coatings applications.

Uploaded by

TamerTamer
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
142 views1 page

Marathon: Technical Data Sheet

This technical data sheet provides information on Marathon, a two-component polyamine cured epoxy coating. It is a high solids, high build coating reinforced with glass flake. It is suitable for environments with high corrosivity, including as a primer, mid coat, or finish coat for carbon steel and concrete in atmospheric or immersed environments. It has approvals for various industry standards and is intended for use in marine and protective coatings applications.

Uploaded by

TamerTamer
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Technical Data Sheet

Approved 574;576 1,2 574 epoxy ^(ValidationDate) 1

Marathon

Product description
This is a two component polyamine cured epoxy coating. It is a high solids, high build, glass flake reinforced
product. It is scratch and abrasion resistant. Suitable for environments with very high corrosivity. Can be used
as primer, mid coat, finish coat or as single coat system in atmospheric and immersed environments. Suitable
for properly prepared carbon steel and concrete substrates.

Typical use
Marine:
Specially suited in areas where high scratch resistance is required.

Protective:
Suitable for structural steel and piping to be exposed to corrosive environments up to very high and immersed.
Recommended for offshore environments, refineries, power plants, bridges, buildings, mining equipment and
general structural steel. Compatible with cathodic protection systems.
Other

Approvals and certificates


APAS approved to specification 0213
NORSOK Standard M-501, Edition 6, Coating system no. 7A - Carbon and stainless steel in the splash zone
NORSOK Standard M-501, Edition 6, Coating system no. 7B - Submerged carbon and stainless steel ≤ 50 °C
NORSOK Standard M-501, Edition 6, Coating system no. 7C - Submerged carbon and stainless steel > 50 °C
Additional certificates and approvals may be available on request.

Colours
selected range of colours

Product data
Property Test/Standard Description

Solids by volume ISO 3233 80 ± 2 %


Gloss level (GU 60 °) ISO 2813 gloss (70-85)
Flash point ISO 3679 Method 1 30 °C
Density calculated 1.3 kg/l
VOC-US/Hong Kong US EPA method 24 (tested) 210 g/l
(CARB(SCM)2007, SCAQMD rule 1113, Hong Kong)
VOC-EU IED (2010/75/EU) (theoretical) 248 g/l
VOC-China GB/T 23985-2009 (tested) 186 g/l
VOC-Korea Korea Clean Air Conservation Act (tested) 219 g/l

The provided data is typical for factory produced products, subject to slight variation depending on colour.
All data is valid for mixed paint.
Gloss description: According to Jotun Performance Coatings' definition.

Date of issue: 8 January 2020 Page: 1/5

This Technical Data Sheet supersedes those previously issued.


The Technical Data Sheet (TDS) is recommended to be read in conjunction with the Safety Data Sheet (SDS) and the
Application Guide (AG) for this product. For your nearest local Jotun office, please visit our website at www.jotun.com

You might also like